This is the start of the review cycle for the Linux 3.11.10.7 stable kernel.
This version contains 144 new patches, summarized below. The new patches are
posted as replies to this message and also available in this git branch:
http://kernel.ubuntu.com/git?p=ubuntu/linux.git;h=linux-3.11.y-review;a=shortlog
git://kernel.ubuntu.com/ubuntu/linux.git linux-3.11.y-review
The review period for version 3.11.10.7 will be open for the next three days.
To report a problem, please reply to the relevant follow-up patch message.
For more information about the Linux 3.11.y.z extended stable kernel version,
see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable .
-Luis
--
arch/arm/Kconfig | 2 +
arch/arm/include/asm/memory.h | 9 +-
arch/arm/include/asm/outercache.h | 4 +-
arch/arm/kernel/setup.c | 30 +++-
arch/arm/mach-highbank/highbank.c | 13 +-
arch/arm/mach-sa1100/include/mach/collie.h | 2 +
arch/mips/include/asm/mipsregs.h | 1 +
arch/powerpc/kernel/process.c | 9 ++
arch/powerpc/kernel/reloc_64.S | 1 +
arch/x86/include/asm/topology.h | 3 +-
arch/x86/kernel/head_32.S | 7 +-
arch/x86/kernel/head_64.S | 6 +-
arch/x86/kernel/i387.c | 15 +-
arch/x86/kernel/quirks.c | 2 +-
arch/x86/kvm/mmu.c | 9 ++
arch/x86/kvm/paging_tmpl.h | 8 +
arch/x86/kvm/svm.c | 6 +-
arch/x86/net/bpf_jit.S | 2 +-
drivers/acpi/ec.c | 2 +-
drivers/acpi/resource.c | 10 ++
drivers/acpi/sleep.c | 32 ++--
drivers/ata/libata-core.c | 1 +
drivers/clocksource/vf_pit_timer.c | 2 +-
drivers/firewire/core-device.c | 22 ++-
drivers/firewire/net.c | 6 +-
drivers/firewire/ohci.c | 31 ++--
drivers/firewire/sbp2.c | 17 ++-
drivers/gpu/drm/i915/i915_drv.c | 23 ++-
drivers/gpu/drm/i915/i915_gem_stolen.c | 7 +
drivers/gpu/drm/i915/intel_hdmi.c | 6 +-
drivers/gpu/drm/i915/intel_pm.c | 6 +-
drivers/gpu/drm/radeon/atombios_encoders.c | 2 +-
drivers/gpu/drm/radeon/cik.c | 61 ++++----
drivers/gpu/drm/radeon/evergreen.c | 33 ++--
drivers/gpu/drm/radeon/evergreen_smc.h | 2 +-
drivers/gpu/drm/radeon/ni.c | 36 ++---
drivers/gpu/drm/radeon/r600.c | 16 +-
drivers/gpu/drm/radeon/radeon_ttm.c | 3 +
drivers/gpu/drm/radeon/rv770.c | 16 +-
drivers/gpu/drm/radeon/si.c | 18 +--
drivers/gpu/drm/ttm/ttm_bo.c | 8 +-
drivers/hid/hid-lg4ff.c | 22 +--
drivers/i2c/busses/Kconfig | 2 +-
drivers/i2c/busses/i2c-cpm.c | 2 +
drivers/infiniband/ulp/isert/ib_isert.c | 125 +++++++--------
drivers/infiniband/ulp/isert/ib_isert.h | 4 +-
drivers/input/mouse/synaptics.c | 55 +++++++
drivers/input/mousedev.c | 73 +++++----
drivers/md/dm-cache-target.c | 11 +-
drivers/media/pci/cx18/cx18-driver.c | 5 +-
drivers/media/usb/dvb-usb/cxusb.c | 21 ++-
drivers/media/usb/dvb-usb/dw2102.c | 52 +++++--
drivers/mmc/host/sdhci.c | 17 +--
drivers/net/can/flexcan.c | 168 ++++++++++++++++-----
drivers/net/ethernet/broadcom/tg3.c | 3 +-
drivers/net/ethernet/broadcom/tg3.h | 6 +-
drivers/net/ethernet/ibm/ibmveth.c | 25 +--
drivers/net/ethernet/ibm/ibmveth.h | 1 -
drivers/net/ethernet/marvell/mvneta.c | 43 ++----
drivers/net/ethernet/sfc/ptp.c | 7 +
drivers/net/ethernet/ti/davinci_emac.c | 25 ++-
drivers/net/virtio_net.c | 3 +-
drivers/net/vmxnet3/vmxnet3_drv.c | 19 ++-
.../net/wireless/ath/ath9k/ar9462_2p0_initvals.h | 4 +-
drivers/net/wireless/ath/ath9k/xmit.c | 8 +-
drivers/net/wireless/iwlwifi/dvm/mac80211.c | 22 ++-
drivers/net/wireless/iwlwifi/dvm/sta.c | 1 +
drivers/net/wireless/iwlwifi/dvm/tx.c | 14 +-
drivers/net/wireless/iwlwifi/iwl-drv.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-modparams.h | 11 +-
drivers/net/wireless/iwlwifi/mvm/bt-coex.c | 7 +-
drivers/net/wireless/iwlwifi/mvm/mac80211.c | 22 ++-
drivers/net/wireless/iwlwifi/mvm/mvm.h | 2 +-
drivers/net/wireless/iwlwifi/mvm/tx.c | 18 +--
drivers/net/wireless/mwifiex/11ac.c | 3 +-
drivers/net/wireless/mwifiex/11n.c | 3 +-
drivers/net/wireless/mwifiex/pcie.c | 34 ++---
drivers/net/wireless/mwifiex/scan.c | 8 +-
drivers/net/wireless/mwifiex/usb.c | 8 -
drivers/net/wireless/mwifiex/wmm.c | 3 +-
drivers/net/wireless/p54/txrx.c | 2 +-
drivers/pci/pci.c | 3 +
drivers/pinctrl/pinctrl-sunxi.c | 4 +
drivers/pnp/pnpacpi/rsparser.c | 15 +-
drivers/rapidio/devices/tsi721.h | 1 +
drivers/rapidio/devices/tsi721_dma.c | 27 ++--
drivers/regulator/core.c | 48 +++---
drivers/s390/block/dasd.c | 8 +-
drivers/scsi/isci/host.h | 5 +-
drivers/scsi/isci/port_config.c | 7 -
drivers/scsi/isci/task.c | 2 +-
drivers/scsi/qla2xxx/qla_def.h | 3 +-
drivers/scsi/storvsc_drv.c | 3 +
drivers/spi/spi-ath79.c | 4 +-
drivers/staging/zram/zram_drv.c | 2 +
drivers/target/iscsi/iscsi_target.c | 21 ++-
drivers/target/iscsi/iscsi_target_erl2.c | 16 +-
drivers/target/iscsi/iscsi_target_tpg.c | 2 +-
drivers/usb/core/config.c | 4 +
drivers/usb/core/quirks.c | 4 +
fs/btrfs/compression.c | 2 +
fs/ext4/inode.c | 15 +-
fs/namei.c | 1 +
fs/nfs/delegation.c | 11 +-
fs/nfs/nfs4proc.c | 5 +-
fs/ocfs2/file.c | 8 +-
fs/ocfs2/quota_global.c | 27 ++--
fs/ocfs2/quota_local.c | 4 -
fs/proc/base.c | 1 +
include/linux/bitops.h | 15 ++
include/linux/ceph/messenger.h | 2 +-
include/linux/ceph/osd_client.h | 1 +
include/linux/firewire.h | 1 +
include/linux/ftrace_event.h | 4 -
include/linux/jiffies.h | 8 +-
include/linux/mm.h | 2 +-
include/linux/tracepoint.h | 6 +
include/net/tcp.h | 3 +-
include/target/iscsi/iscsi_transport.h | 1 +
include/trace/ftrace.h | 7 +-
ipc/msg.c | 2 +
kernel/cpuset.c | 10 +-
kernel/irq/manage.c | 3 +-
kernel/printk/printk.c | 2 -
kernel/sched/fair.c | 8 +-
kernel/trace/trace_events.c | 16 +-
kernel/trace/trace_export.c | 7 +-
kernel/tracepoint.c | 7 +-
mm/compaction.c | 20 ++-
mm/huge_memory.c | 2 +-
mm/memcontrol.c | 14 ++
net/ceph/messenger.c | 7 +-
net/ceph/mon_client.c | 8 +-
net/ceph/osd_client.c | 66 ++++++--
net/core/neighbour.c | 6 +-
net/ipv4/tcp.c | 8 +-
net/ipv4/tcp_output.c | 7 +-
net/ipv6/exthdrs_core.c | 2 +-
net/ipv6/udp_offload.c | 2 +-
net/mac80211/mesh_ps.c | 1 +
net/mac80211/mlme.c | 23 +++
net/mac80211/sta_info.c | 5 +
net/mac80211/sta_info.h | 7 +-
net/mac80211/tx.c | 15 ++
net/mac80211/wme.c | 5 +
net/sctp/sm_statefuns.c | 7 +
net/unix/af_unix.c | 3 +-
scripts/package/builddeb | 9 +-
sound/core/compress_offload.c | 2 +-
sound/pci/hda/patch_analog.c | 1 +
sound/pci/hda/patch_realtek.c | 1 +
sound/pci/oxygen/xonar_dg.c | 12 +-
sound/soc/codecs/max98090.c | 1 +
sound/usb/mixer.c | 1 +
154 files changed, 1242 insertions(+), 701 deletions(-)
Aisheng Dong (1):
mmc: sdhci: fix lockdep error in tuning routine
Al Viro (1):
ocfs2 syncs the wrong range...
Ales Novak (1):
[SCSI] storvsc: NULL pointer dereference fix
Alex Deucher (6):
drm/radeon/dpm: fix typo in EVERGREEN_SMC_FIRMWARE_HEADER_softRegisters
drm/radeon/atom: select the proper number of lanes in transmitter setup
drm/radeon: re-order firmware loading in preparation for dpm rework
drm/radeon/cik: properly set sdma ring status on disable
drm/radeon/cik: stop the sdma engines in the enable() function
drm/radeon/cik: properly set compute ring status on disable
Alexandre Bounine (1):
rapidio/tsi721: fix tasklet termination in dma channel release
Alexei Starovoitov (1):
x86: bpf_jit: support negative offsets
Amitkumar Karwar (4):
mwifiex: add NULL check for PCIe Rx skb
mwifiex: fix cmd and Tx data timeout issue for PCIe cards
mwifiex: copy AP's HT capability info correctly
mwifiex: save and copy AP's VHT capability info correctly
Anton Blanchard (3):
powerpc: Align p_dyn, p_rela and p_st symbols
net: unix socket code abuses csum_partial
ibmveth: Fix endian issues with MAC addresses
Arnd Bergmann (1):
vmxnet3: fix building without CONFIG_PCI_MSI
Artem Fetishev (2):
fs/proc/base.c: fix GPF in /proc/$PID/map_files
x86: fix boot on uniprocessor systems
Avinash Patil (1):
mwifiex: clean pcie ring only when device is present
Ben Hutchings (1):
deb-pkg: Fix cross-building linux-headers package
Benjamin Tissoires (1):
Input: synaptics - add manual min/max quirk
Bing Zhao (1):
mwifiex: do not advertise usb autosuspend support
Bjorn Helgaas (1):
PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled
Charles Keepax (1):
ALSA: compress: Pass through return value of open ops callback
Chen-Yu Tsai (1):
pinctrl: sunxi: use chained_irq_{enter, exit} for GIC compatibility
Chris Wilson (1):
drm/i915: Disable stolen memory when DMAR is active
Christian Riesch (1):
net: davinci_emac: Replace devm_request_irq with request_irq
Chuansheng Liu (1):
genirq: Remove racy waitqueue_active check
Clemens Ladisch (1):
ALSA: oxygen: Xonar DG(X): modify DAC routing
Dan Carpenter (4):
[media] cxusb: unlock on error in cxusb_i2c_xfer()
[media] cx18: check for allocation failure in cx18_read_eeprom()
[media] dw2102: some missing unlocks on error
p54: clamp properly instead of just truncating
Dan Williams (1):
[SCSI] isci: fix reset timeout handling
Daniel Borkmann (1):
net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable
Daniel J Blueman (1):
x86/amd/numa: Fix northbridge quirk to assign correct NUMA node
Dmitry Torokhov (1):
Input: mousedev - fix race when creating mixed device
Duan Jiong (1):
neigh: recompute reachabletime before returning from neigh_periodic_work()
Edward Cree (1):
sfc: check for NULL efx->ptp_data in efx_ptp_event
Emmanuel Grumbach (4):
mac80211: fix AP powersave TX vs. wakeup race
iwlwifi: dvm: clear IWL_STA_UCODE_INPROGRESS when assoc fails
iwlwifi: mvm: don't WARN when statistics are handled late
iwlwifi: disable TX AMPDU by default for iwldvm
Eric Dumazet (1):
net-tcp: fastopen: fix high order allocations
Fabio Estevam (1):
can: flexcan: Check the return value from clk_prepare_enable()
Felix Fietkau (1):
mac80211: send control port protocol frames to the VO queue
Filipe Brandenburger (1):
memcg: reparent charges of children before processing parent
Filipe David Borba Manana (1):
Btrfs: fix data corruption when reading/updating compressed extents
Gabor Juhos (1):
spi: spi-ath79: fix initial GPIO CS line setup
George McCollister (1):
sched: Fix double normalization of vruntime
Giridhar Malavali (1):
[SCSI] qla2xxx: Poll during initialization for ISP25xx and ISP83xx
H. Peter Anvin (1):
x86: Ignore NMIs that come in during early boot
Hannes Frederic Sowa (1):
ipv6: reuse ip6_frag_id from ip6_ufo_append_data
Hans Schillstrom (1):
ipv6: ipv6_find_hdr restore prev functionality
Hans de Goede (1):
Input: synaptics - add manual min/max quirk for ThinkPad X240
Heiko Carstens (1):
s390/dasd: hold request queue sysfs lock when calling elevator_init()
Heinz Mauelshagen (2):
dm cache: fix truncation bug when copying a block to/from >2TB fast device
dm cache: fix access beyond end of origin device
Ilya Dryomov (3):
libceph: rename ceph_msg::front_max to front_alloc_len
libceph: rename front to front_len in get_reply()
libceph: fix preallocation check in get_reply()
Imre Deak (2):
drm/i915: fix pch pci device enumeration
drm/i915: vlv: reserve GT power context early
Jan Kara (1):
ocfs2: fix quota file corruption
Jason Wang (1):
virtio-net: alloc big buffers also when guest can receive UFO
Johannes Berg (4):
mac80211: don't validate unchanged AP bandwidth while tracking
iwlwifi: fix TX status for aggregated packets
mac80211: fix association to 20/40 MHz VHT networks
mac80211: clear sequence/fragment number in QoS-null frames
Josh Durgin (2):
libceph: block I/O when PAUSE or FULL osd map flags are set
libceph: resend all writes after the osdmap loses the full flag
Julius Werner (2):
usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e
usb: Make DELAY_INIT quirk wait 100ms between Get Configuration requests
Laura Abbott (1):
mm/compaction: break out of loop on !PageBuddy in isolate_freepages_block
Lauri Kasanen (1):
drm/radeon: TTM must be init with cpu-visible VRAM, v2
Li Zefan (2):
cpuset: fix a locking issue in cpuset_migrate_mm()
cpuset: fix a race condition in __cpuset_node_allowed_softwall()
Linus Torvalds (2):
x86: fix compile error due to X86_TRAP_NMI use in asm files
printk: fix syslog() overflowing user buffer
Linus Walleij (1):
ARM: 7991/1: sa1100: fix compile problem on Collie
Lukasz Dorau (1):
[SCSI] isci: correct erroneous for_each_isci_host macro
Magnus Damm (1):
ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
Marc Kleine-Budde (6):
can: flexcan: fix shutdown: first disable chip, then all interrupts
can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails
can: flexcan: fix transition from and to low power mode in chip_{en,dis}able
can: flexcan: factor out transceiver {en,dis}able into seperate functions
can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze
can: flexcan: flexcan_remove(): add missing netif_napi_del()
Marcelo Tosatti (1):
KVM: x86: handle invalid root_hpa everywhere
Marius Knaust (1):
ALSA: hda - Added inverted digital-mic handling for Acer TravelMate 8371
Markus Pargmann (2):
regulator: core: Replace direct ops->enable usage
regulator: core: Replace direct ops->disable usage
Max Stepanov (1):
iwlwifi: mvm: change of listen interval from 70 to 10
Michael Chan (1):
tg3: Don't check undefined error bits in RXBD
Michael Kerrisk (1):
ipc: Fix 2 bugs in msgrcv() MSG_COPY implementation
Michael Neuling (1):
powerpc/tm: Fix crash when forking inside a transaction
Michele Baldessari (1):
libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8 (2BA30001)
Minchan Kim (1):
zram: avoid null access when fail to alloc meta
Neil Horman (1):
vmxnet3: fix netpoll race condition
Nicholas Bellinger (5):
iscsi-target: Fix iscsit_get_tpg_from_np tpg_state bug
iscsi-target: Perform release of acknowledged tags from RX context
iscsi/iser-target: Use list_del_init for ->i_conn_node
iscsi/iser-target: Fix isert_conn->state hung shutdown issues
iser-target: Fix post_send_buf_count for RDMA READ/WRITE
Oleg Drokin (1):
Fix mountpoint reference leakage in linkat
Paul E. McKenney (1):
jiffies: Avoid undefined behavior from signed overflow
Qais Yousef (1):
MIPS: include linux/types.h
Radim Krčmář (1):
KVM: SVM: fix cr8 intercept window
Rafael J. Wysocki (1):
ACPI / sleep: Add extra checks for HW Reduced ACPI mode sleep states
Richard Weinberger (1):
i2c: Remove usage of orphaned symbol OF_I2C
Rob Clark (1):
drm/ttm: don't oops if no invalidate_caches()
Rob Herring (2):
ARM: highbank: avoid L2 cache smc calls when PL310 is not present
ARM: move outer_cache declaration out of ifdef
Roman Volkov (1):
ALSA: oxygen: Xonar DG(X): capture from I2S channel 1, not 2
Russell King (2):
ARM: fix noMMU kallsyms symbol filtering
ARM: ignore memory below PHYS_OFFSET
Sachin Kamat (1):
ACPI / EC: Fix incorrect placement of __initdata
Scott Wood (1):
i2c: cpm: Fix build by adding of_address.h and of_irq.h
Simon Wood (1):
HID:hid-lg4ff: Initialize device properties before we touch autocentering.
Stanislaw Gruszka (1):
ath9k: protect tid->sched check
Stefan Agner (1):
clocksource: vf_pit_timer: use complement for sched_clock reading
Stefan Richter (3):
firewire: net: fix use after free
firewire: ohci: beautify some macro definitions
firewire: ohci: fix probe failure with Agere/LSI controllers
Stephen Warren (1):
ASoC: max98090: make REVISION_ID readable
Steven Rostedt (Red Hat) (1):
tracing: Do not add event files for modules that fail tracepoints
Sujith Manoharan (1):
ath9k: Fix ETSI compliance for AR9462 2.0
Suresh Siddha (1):
x86, fpu: Check tsk_used_math() in kernel_fpu_end() for eager FPU
Takashi Iwai (2):
ALSA: hda - Add missing loopback merge path for AD1884/1984 codecs
ALSA: usb-audio: Add quirk for Logitech Webcam C500
Tejun Heo (1):
firewire: don't use PREPARE_DELAYED_WORK
Theodore Ts'o (1):
ext4: atomically set inode->i_flags in ext4_set_inode_flags()
Thomas Petazzoni (2):
net: mvneta: rename MVNETA_GMAC2_PSC_ENABLE to MVNETA_GMAC2_PCS_ENABLE
net: mvneta: fix usage as a module on RGMII configurations
Trond Myklebust (2):
NFS: Fix a delegation callback race
NFSv4: nfs4_stateid_is_current should return 'true' for an invalid stateid
Vaibhav Nagarnaik (1):
tracing: Fix array size mismatch in format string
Ville Syrjälä (1):
drm/i915: Reject >165MHz modes w/ DVI monitors
Vlastimil Babka (1):
mm: include VM_MIXEDMAP flag in the VM_SPECIAL list to avoid m(un)locking
Zhang Rui (2):
ACPI / resources: ignore invalid ACPI device resources
PNP / ACPI: proper handling of ACPI IO/Memory resource parsing failures
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Roman Volkov <[email protected]>
commit 3dd77654fb1d7f68b9739f3039bad8dbbc0739f8 upstream.
Actually CS4245 connected to the I2S channel 1 for
capture, not channel 2. Otherwise capturing and
playback does not work for CS4245.
Signed-off-by: Roman Volkov <[email protected]>
Signed-off-by: Clemens Ladisch <[email protected]>
[ luis: backported to 3.11:
- model_xonar_dg is defined in xonar_dg.c in 3.5 kernel ]
Signed-off-by: Luis Henriques <[email protected]>
---
sound/pci/oxygen/xonar_dg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/pci/oxygen/xonar_dg.c b/sound/pci/oxygen/xonar_dg.c
index 77acd79..5519b8f 100644
--- a/sound/pci/oxygen/xonar_dg.c
+++ b/sound/pci/oxygen/xonar_dg.c
@@ -596,7 +596,7 @@ struct oxygen_model model_xonar_dg = {
.model_data_size = sizeof(struct dg),
.device_config = PLAYBACK_0_TO_I2S |
PLAYBACK_1_TO_SPDIF |
- CAPTURE_0_FROM_I2S_2 |
+ CAPTURE_0_FROM_I2S_1 |
CAPTURE_1_FROM_SPDIF,
.dac_channels_pcm = 6,
.dac_channels_mixer = 0,
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Amitkumar Karwar <[email protected]>
commit bb8e6a1ee881d131e404f0f1f5e8dc9281002771 upstream.
We may get a NULL pointer here if skb allocation for Rx packet
was failed earlier.
Signed-off-by: Amitkumar Karwar <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/mwifiex/pcie.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index 20c9c4c..1662b99 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -1195,6 +1195,12 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter)
rd_index = card->rxbd_rdptr & reg->rx_mask;
skb_data = card->rx_buf_list[rd_index];
+ /* If skb allocation was failed earlier for Rx packet,
+ * rx_buf_list[rd_index] would have been left with a NULL.
+ */
+ if (!skb_data)
+ return -ENOMEM;
+
MWIFIEX_SKB_PACB(skb_data, &buf_pa);
pci_unmap_single(card->dev, buf_pa, MWIFIEX_RX_DATA_BUF_SIZE,
PCI_DMA_FROMDEVICE);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Steven Rostedt (Red Hat)" <[email protected]>
commit 45ab2813d40d88fc575e753c38478de242d03f88 upstream.
If a module fails to add its tracepoints due to module tainting, do not
create the module event infrastructure in the debugfs directory. As the events
will not work and worse yet, they will silently fail, making the user wonder
why the events they enable do not display anything.
Having a warning on module load and the events not visible to the users
will make the cause of the problem much clearer.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 6d723736e472 "tracing/events: add support for modules to TRACE_EVENT"
Acked-by: Mathieu Desnoyers <[email protected]>
Cc: Rusty Russell <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
include/linux/tracepoint.h | 6 ++++++
kernel/trace/trace_events.c | 10 ++++++++++
kernel/tracepoint.c | 7 ++++++-
3 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index ebeab36..0ecc46e 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -60,6 +60,12 @@ struct tp_module {
unsigned int num_tracepoints;
struct tracepoint * const *tracepoints_ptrs;
};
+bool trace_module_has_bad_taint(struct module *mod);
+#else
+static inline bool trace_module_has_bad_taint(struct module *mod)
+{
+ return false;
+}
#endif /* CONFIG_MODULES */
struct tracepoint_iter {
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 29a7ebc..34b821f 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -1844,6 +1844,16 @@ static void trace_module_add_events(struct module *mod)
struct ftrace_module_file_ops *file_ops = NULL;
struct ftrace_event_call **call, **start, **end;
+ if (!mod->num_trace_events)
+ return;
+
+ /* Don't add infrastructure for mods without tracepoints */
+ if (trace_module_has_bad_taint(mod)) {
+ pr_err("%s: module has bad taint, not creating trace events\n",
+ mod->name);
+ return;
+ }
+
start = mod->trace_events;
end = mod->trace_events + mod->num_trace_events;
diff --git a/kernel/tracepoint.c b/kernel/tracepoint.c
index 29f2654..031cc56 100644
--- a/kernel/tracepoint.c
+++ b/kernel/tracepoint.c
@@ -631,6 +631,11 @@ void tracepoint_iter_reset(struct tracepoint_iter *iter)
EXPORT_SYMBOL_GPL(tracepoint_iter_reset);
#ifdef CONFIG_MODULES
+bool trace_module_has_bad_taint(struct module *mod)
+{
+ return mod->taints & ~((1 << TAINT_OOT_MODULE) | (1 << TAINT_CRAP));
+}
+
static int tracepoint_module_coming(struct module *mod)
{
struct tp_module *tp_mod, *iter;
@@ -641,7 +646,7 @@ static int tracepoint_module_coming(struct module *mod)
* module headers (for forced load), to make sure we don't cause a crash.
* Staging and out-of-tree GPL modules are fine.
*/
- if (mod->taints & ~((1 << TAINT_OOT_MODULE) | (1 << TAINT_CRAP)))
+ if (trace_module_has_bad_taint(mod))
return 0;
mutex_lock(&tracepoints_mutex);
tp_mod = kmalloc(sizeof(struct tp_module), GFP_KERNEL);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Richter <[email protected]>
commit 0ca49345b6f489e95f8d6edeb0b092e257475b2a upstream.
Since commit bd972688eb24
"firewire: ohci: Fix 'failed to read phy reg' on FW643 rev8",
there is a high chance that firewire-ohci fails to initialize LSI née
Agere controllers.
https://bugzilla.kernel.org/show_bug.cgi?id=65151
Peter Hurley points out the reason: IEEE 1394a:2000 clause 5A.1 (or
IEEE 1394:2008 clause 17.2.1) say: "The PHY shall insure that no more
than 10 ms elapse from the reassertion of LPS until the interface is
reset. The link shall not assert LReq until the reset is complete."
In other words, the link needs to give the PHY at least 10 ms to get
the interface operational.
With just the msleep(1) in bd972688eb24, the first read_phy_reg()
during ohci_enable() may happen before the phy-link interface reset was
finished, and fail. Due to the high variability of msleep(n) with small
n, this failure was not fully reproducible, and not apparent at all with
low CONFIG_HZ setting.
On the other hand, Peter can no longer reproduce the issue with FW643
rev8. The read phy reg failures that happened back then may have had an
unrelated cause. So, just revert bd972688eb24, except for the valid
comment on TSB82AA2 cards.
Reported-by: Mikhail Gavrilov
Reported-by: Jay Fenlason <[email protected]>
Reported-by: Clemens Ladisch <[email protected]>
Reported-by: Peter Hurley <[email protected]>
Signed-off-by: Stefan Richter <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/firewire/ohci.c | 15 ++-------------
1 file changed, 2 insertions(+), 13 deletions(-)
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 66a63b4..0f3e304 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -288,7 +288,6 @@ static char ohci_driver_name[] = KBUILD_MODNAME;
#define QUIRK_NO_MSI 0x10
#define QUIRK_TI_SLLZ059 0x20
#define QUIRK_IR_WAKE 0x40
-#define QUIRK_PHY_LCTRL_TIMEOUT 0x80
/* In case of multiple matches in ohci_quirks[], only the first one is used. */
static const struct {
@@ -301,10 +300,7 @@ static const struct {
QUIRK_BE_HEADERS},
{PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6,
- QUIRK_PHY_LCTRL_TIMEOUT | QUIRK_NO_MSI},
-
- {PCI_VENDOR_ID_ATT, PCI_ANY_ID, PCI_ANY_ID,
- QUIRK_PHY_LCTRL_TIMEOUT},
+ QUIRK_NO_MSI},
{PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_SB1394, PCI_ANY_ID,
QUIRK_RESET_PACKET},
@@ -351,7 +347,6 @@ MODULE_PARM_DESC(quirks, "Chip quirks (default = 0"
", disable MSI = " __stringify(QUIRK_NO_MSI)
", TI SLLZ059 erratum = " __stringify(QUIRK_TI_SLLZ059)
", IR wake unreliable = " __stringify(QUIRK_IR_WAKE)
- ", phy LCtrl timeout = " __stringify(QUIRK_PHY_LCTRL_TIMEOUT)
")");
#define OHCI_PARAM_DEBUG_AT_AR 1
@@ -2293,9 +2288,6 @@ static int ohci_enable(struct fw_card *card,
* TI TSB82AA2 + TSB81BA3(A) cards signal LPS enabled early but
* cannot actually use the phy at that time. These need tens of
* millisecods pause between LPS write and first phy access too.
- *
- * But do not wait for 50msec on Agere/LSI cards. Their phy
- * arbitration state machine may time out during such a long wait.
*/
reg_write(ohci, OHCI1394_HCControlSet,
@@ -2303,11 +2295,8 @@ static int ohci_enable(struct fw_card *card,
OHCI1394_HCControl_postedWriteEnable);
flush_writes(ohci);
- if (!(ohci->quirks & QUIRK_PHY_LCTRL_TIMEOUT))
+ for (lps = 0, i = 0; !lps && i < 3; i++) {
msleep(50);
-
- for (lps = 0, i = 0; !lps && i < 150; i++) {
- msleep(1);
lps = reg_read(ohci, OHCI1394_HCControlSet) &
OHCI1394_HCControl_LPS;
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Petazzoni <[email protected]>
commit e3a8786c10e75903f1269474e21fe8cb49c3a670 upstream.
Commit 5445eaf309ff ('mvneta: Try to fix mvneta when compiled as
module') fixed the mvneta driver to make it work properly when loaded
as a module in SGMII configuration, which was tested successful by the
author on the Armada XP OpenBlocks AX3, which uses SGMII.
However, it turns out that the Armada XP GP, which uses RGMII, is
affected by a similar problem: its SERDES configuration is lost when
mvneta is loaded as a module, because this configuration is set by the
bootloader, and then lost because the clock is gated by the clock
framework until the mvneta driver is loaded again and the clock is
re-enabled.
However, it turns out that for the RGMII case, setting the SERDES
configuration is not sufficient: the PCS enable bit in the
MVNETA_GMAC_CTRL_2 register must also be set, like in the SGMII
configuration.
Therefore, this commit reworks the SGMII/RGMII initialization: the
only difference between the two now is a different SERDES
configuration, all the rest is identical.
In detail, to achieve this, the commit:
* Renames MVNETA_SGMII_SERDES_CFG to MVNETA_SERDES_CFG because it is
not specific to SGMII, but also used on RGMII configurations.
* Adds a MVNETA_RGMII_SERDES_PROTO definition, that must be used as
the MVNETA_SERDES_CFG value in RGMII configurations.
* Removes the mvneta_gmac_rgmii_set() and mvneta_port_sgmii_config()
functions, and instead directly do the SGMII/RGMII configuration in
mvneta_port_up(), from where those functions where called. It is
worth mentioning that mvneta_gmac_rgmii_set() had an 'enable'
parameter that was always passed as '1', so it was pretty useless.
* Reworks the mvneta_port_up() function to set the MVNETA_SERDES_CFG
register to the appropriate value depending on the RGMII vs. SGMII
configuration. It also unconditionally set the PCS_ENABLE bit (was
already done for SGMII, but is now also needed for RGMII), and sets
the PORT_RGMII bit (which was already done for both SGMII and
RGMII).
This commit was successfully tested with mvneta compiled as a module,
on both the OpenBlocks AX3 (SGMII configuration) and the Armada XP GP
(RGMII configuration).
Reported-by: Steve McIntyre <[email protected]>
Signed-off-by: Thomas Petazzoni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/marvell/mvneta.c | 41 +++++++----------------------------
1 file changed, 8 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index b8aea9a..79ffd68 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -88,8 +88,9 @@
#define MVNETA_TX_IN_PRGRS BIT(1)
#define MVNETA_TX_FIFO_EMPTY BIT(8)
#define MVNETA_RX_MIN_FRAME_SIZE 0x247c
-#define MVNETA_SGMII_SERDES_CFG 0x24A0
+#define MVNETA_SERDES_CFG 0x24A0
#define MVNETA_SGMII_SERDES_PROTO 0x0cc7
+#define MVNETA_RGMII_SERDES_PROTO 0x0667
#define MVNETA_TYPE_PRIO 0x24bc
#define MVNETA_FORCE_UNI BIT(21)
#define MVNETA_TXQ_CMD_1 0x24e4
@@ -634,35 +635,6 @@ static void mvneta_rxq_bm_disable(struct mvneta_port *pp,
mvreg_write(pp, MVNETA_RXQ_CONFIG_REG(rxq->id), val);
}
-
-
-/* Sets the RGMII Enable bit (RGMIIEn) in port MAC control register */
-static void mvneta_gmac_rgmii_set(struct mvneta_port *pp, int enable)
-{
- u32 val;
-
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
-
- if (enable)
- val |= MVNETA_GMAC2_PORT_RGMII;
- else
- val &= ~MVNETA_GMAC2_PORT_RGMII;
-
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
-}
-
-/* Config SGMII port */
-static void mvneta_port_sgmii_config(struct mvneta_port *pp)
-{
- u32 val;
-
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
- val |= MVNETA_GMAC2_PCS_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
-
- mvreg_write(pp, MVNETA_SGMII_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
-}
-
/* Start the Ethernet port RX and TX activity */
static void mvneta_port_up(struct mvneta_port *pp)
{
@@ -2674,12 +2646,15 @@ static void mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0);
if (phy_mode == PHY_INTERFACE_MODE_SGMII)
- mvneta_port_sgmii_config(pp);
+ mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
+ else
+ mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_RGMII_SERDES_PROTO);
- mvneta_gmac_rgmii_set(pp, 1);
+ val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+
+ val |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
/* Cancel Port Reset */
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
val &= ~MVNETA_GMAC2_PORT_RESET;
mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Torokhov <[email protected]>
commit e4dbedc7eac7da9db363a36f2bd4366962eeefcc upstream.
We should not be using static variable mousedev_mix in methods that can be
called before that singleton gets assigned. While at it let's add open and
close methods to mousedev structure so that we do not need to test if we
are dealing with multiplexor or normal device and simply call appropriate
method directly.
This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=71551
Reported-by: GiulioDP <[email protected]>
Tested-by: GiulioDP <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/input/mousedev.c | 73 ++++++++++++++++++++++++++++--------------------
1 file changed, 42 insertions(+), 31 deletions(-)
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 4c842c3..b604564 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -67,7 +67,6 @@ struct mousedev {
struct device dev;
struct cdev cdev;
bool exist;
- bool is_mixdev;
struct list_head mixdev_node;
bool opened_by_mixdev;
@@ -77,6 +76,9 @@ struct mousedev {
int old_x[4], old_y[4];
int frac_dx, frac_dy;
unsigned long touch;
+
+ int (*open_device)(struct mousedev *mousedev);
+ void (*close_device)(struct mousedev *mousedev);
};
enum mousedev_emul {
@@ -116,9 +118,6 @@ static unsigned char mousedev_imex_seq[] = { 0xf3, 200, 0xf3, 200, 0xf3, 80 };
static struct mousedev *mousedev_mix;
static LIST_HEAD(mousedev_mix_list);
-static void mixdev_open_devices(void);
-static void mixdev_close_devices(void);
-
#define fx(i) (mousedev->old_x[(mousedev->pkt_count - (i)) & 03])
#define fy(i) (mousedev->old_y[(mousedev->pkt_count - (i)) & 03])
@@ -428,9 +427,7 @@ static int mousedev_open_device(struct mousedev *mousedev)
if (retval)
return retval;
- if (mousedev->is_mixdev)
- mixdev_open_devices();
- else if (!mousedev->exist)
+ if (!mousedev->exist)
retval = -ENODEV;
else if (!mousedev->open++) {
retval = input_open_device(&mousedev->handle);
@@ -446,9 +443,7 @@ static void mousedev_close_device(struct mousedev *mousedev)
{
mutex_lock(&mousedev->mutex);
- if (mousedev->is_mixdev)
- mixdev_close_devices();
- else if (mousedev->exist && !--mousedev->open)
+ if (mousedev->exist && !--mousedev->open)
input_close_device(&mousedev->handle);
mutex_unlock(&mousedev->mutex);
@@ -459,21 +454,29 @@ static void mousedev_close_device(struct mousedev *mousedev)
* stream. Note that this function is called with mousedev_mix->mutex
* held.
*/
-static void mixdev_open_devices(void)
+static int mixdev_open_devices(struct mousedev *mixdev)
{
- struct mousedev *mousedev;
+ int error;
+
+ error = mutex_lock_interruptible(&mixdev->mutex);
+ if (error)
+ return error;
- if (mousedev_mix->open++)
- return;
+ if (!mixdev->open++) {
+ struct mousedev *mousedev;
- list_for_each_entry(mousedev, &mousedev_mix_list, mixdev_node) {
- if (!mousedev->opened_by_mixdev) {
- if (mousedev_open_device(mousedev))
- continue;
+ list_for_each_entry(mousedev, &mousedev_mix_list, mixdev_node) {
+ if (!mousedev->opened_by_mixdev) {
+ if (mousedev_open_device(mousedev))
+ continue;
- mousedev->opened_by_mixdev = true;
+ mousedev->opened_by_mixdev = true;
+ }
}
}
+
+ mutex_unlock(&mixdev->mutex);
+ return 0;
}
/*
@@ -481,19 +484,22 @@ static void mixdev_open_devices(void)
* device. Note that this function is called with mousedev_mix->mutex
* held.
*/
-static void mixdev_close_devices(void)
+static void mixdev_close_devices(struct mousedev *mixdev)
{
- struct mousedev *mousedev;
+ mutex_lock(&mixdev->mutex);
- if (--mousedev_mix->open)
- return;
+ if (!--mixdev->open) {
+ struct mousedev *mousedev;
- list_for_each_entry(mousedev, &mousedev_mix_list, mixdev_node) {
- if (mousedev->opened_by_mixdev) {
- mousedev->opened_by_mixdev = false;
- mousedev_close_device(mousedev);
+ list_for_each_entry(mousedev, &mousedev_mix_list, mixdev_node) {
+ if (mousedev->opened_by_mixdev) {
+ mousedev->opened_by_mixdev = false;
+ mousedev_close_device(mousedev);
+ }
}
}
+
+ mutex_unlock(&mixdev->mutex);
}
@@ -522,7 +528,7 @@ static int mousedev_release(struct inode *inode, struct file *file)
mousedev_detach_client(mousedev, client);
kfree(client);
- mousedev_close_device(mousedev);
+ mousedev->close_device(mousedev);
return 0;
}
@@ -550,7 +556,7 @@ static int mousedev_open(struct inode *inode, struct file *file)
client->mousedev = mousedev;
mousedev_attach_client(mousedev, client);
- error = mousedev_open_device(mousedev);
+ error = mousedev->open_device(mousedev);
if (error)
goto err_free_client;
@@ -861,16 +867,21 @@ static struct mousedev *mousedev_create(struct input_dev *dev,
if (mixdev) {
dev_set_name(&mousedev->dev, "mice");
+
+ mousedev->open_device = mixdev_open_devices;
+ mousedev->close_device = mixdev_close_devices;
} else {
int dev_no = minor;
/* Normalize device number if it falls into legacy range */
if (dev_no < MOUSEDEV_MINOR_BASE + MOUSEDEV_MINORS)
dev_no -= MOUSEDEV_MINOR_BASE;
dev_set_name(&mousedev->dev, "mouse%d", dev_no);
+
+ mousedev->open_device = mousedev_open_device;
+ mousedev->close_device = mousedev_close_device;
}
mousedev->exist = true;
- mousedev->is_mixdev = mixdev;
mousedev->handle.dev = input_get_device(dev);
mousedev->handle.name = dev_name(&mousedev->dev);
mousedev->handle.handler = handler;
@@ -919,7 +930,7 @@ static void mousedev_destroy(struct mousedev *mousedev)
device_del(&mousedev->dev);
mousedev_cleanup(mousedev);
input_free_minor(MINOR(mousedev->dev.devt));
- if (!mousedev->is_mixdev)
+ if (mousedev != mousedev_mix)
input_unregister_handle(&mousedev->handle);
put_device(&mousedev->dev);
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <[email protected]>
commit f8ce239dfc7ba9add41d9ecdc5e7810738f839fa upstream.
builddeb generates a control file that says the linux-headers package
can only be built for the build system primary architecture. This
breaks cross-building configurations. We should use $debarch for this
instead.
Since $debarch is not yet set when generating the control file, set
Architecture: any and use control file variables to fill in the
description.
Fixes: cd8d60a20a45 ('kbuild: create linux-headers package in deb-pkg')
Reported-and-tested-by: "Niew, Sh." <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Michal Marek <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
scripts/package/builddeb | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index acb8650..3001ec5 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -62,7 +62,7 @@ create_package() {
fi
# Create the package
- dpkg-gencontrol -isp $forcearch -p$pname -P"$pdir"
+ dpkg-gencontrol -isp $forcearch -Vkernel:debarch="${debarch:-$(dpkg --print-architecture)}" -p$pname -P"$pdir"
dpkg --build "$pdir" ..
}
@@ -252,15 +252,14 @@ mkdir -p "$destdir"
(cd $objtree; tar -c -f - -T "$objtree/debian/hdrobjfiles") | (cd $destdir; tar -xf -)
ln -sf "/usr/src/linux-headers-$version" "$kernel_headers_dir/lib/modules/$version/build"
rm -f "$objtree/debian/hdrsrcfiles" "$objtree/debian/hdrobjfiles"
-arch=$(dpkg --print-architecture)
cat <<EOF >> debian/control
Package: $kernel_headers_packagename
Provides: linux-headers, linux-headers-2.6
-Architecture: $arch
-Description: Linux kernel headers for $KERNELRELEASE on $arch
- This package provides kernel header files for $KERNELRELEASE on $arch
+Architecture: any
+Description: Linux kernel headers for $KERNELRELEASE on \${kernel:debarch}
+ This package provides kernel header files for $KERNELRELEASE on \${kernel:debarch}
.
This is useful for people who need to build external modules
EOF
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Aisheng Dong <[email protected]>
commit 2b35bd83467df6f8284b9148d6f768148c3a5e5f upstream.
The sdhci_execute_tuning routine gets lock separately by
disable_irq(host->irq);
spin_lock(&host->lock);
It will cause the following lockdep error message since the &host->lock
could also be got in irq context.
Use spin_lock_irqsave/spin_unlock_restore instead to get rid of
this error message.
[ INFO: inconsistent lock state ]
3.13.0-rc1+ #287 Not tainted
---------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
kworker/u2:1/33 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&(&host->lock)->rlock){?.-...}, at: [<8045f7f4>] sdhci_execute_tuning+0x4c/0x710
{IN-HARDIRQ-W} state was registered at:
[<8005f030>] mark_lock+0x140/0x6ac
[<80060760>] __lock_acquire+0xb30/0x1cbc
[<800620d0>] lock_acquire+0x70/0x84
[<8061d1c8>] _raw_spin_lock+0x30/0x40
[<804605cc>] sdhci_irq+0x24/0xa68
[<8006b1d4>] handle_irq_event_percpu+0x54/0x18c
[<8006b350>] handle_irq_event+0x44/0x64
[<8006e50c>] handle_fasteoi_irq+0xa0/0x170
[<8006a8f0>] generic_handle_irq+0x30/0x44
[<8000f238>] handle_IRQ+0x54/0xbc
[<8000864c>] gic_handle_irq+0x30/0x64
[<80013024>] __irq_svc+0x44/0x5c
[<80329bf4>] dev_vprintk_emit+0x50/0x58
[<80329c24>] dev_printk_emit+0x28/0x30
[<80329fec>] __dev_printk+0x4c/0x90
[<8032a180>] dev_err+0x3c/0x48
[<802dd4f0>] _regulator_get+0x158/0x1cc
[<802dd5b4>] regulator_get_optional+0x18/0x1c
[<80461df4>] sdhci_add_host+0x42c/0xbd8
[<80464820>] sdhci_esdhc_imx_probe+0x378/0x67c
[<8032ee88>] platform_drv_probe+0x20/0x50
[<8032d48c>] driver_probe_device+0x118/0x234
[<8032d690>] __driver_attach+0x9c/0xa0
[<8032b89c>] bus_for_each_dev+0x68/0x9c
[<8032cf44>] driver_attach+0x20/0x28
[<8032cbc8>] bus_add_driver+0x148/0x1f4
[<8032dce0>] driver_register+0x80/0x100
[<8032ee54>] __platform_driver_register+0x50/0x64
[<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
[<80008980>] do_one_initcall+0x108/0x16c
[<8081cca4>] kernel_init_freeable+0x10c/0x1d0
[<80611b28>] kernel_init+0x10/0x120
[<8000e9c8>] ret_from_fork+0x14/0x2c
irq event stamp: 805
hardirqs last enabled at (805): [<8061d43c>] _raw_spin_unlock_irqrestore+0x38/0x4c
hardirqs last disabled at (804): [<8061d2c8>] _raw_spin_lock_irqsave+0x24/0x54
softirqs last enabled at (570): [<8002b824>] __do_softirq+0x1c4/0x290
softirqs last disabled at (561): [<8002bcf4>] irq_exit+0xb4/0x10c
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&host->lock)->rlock);
<Interrupt>
lock(&(&host->lock)->rlock);
*** DEADLOCK ***
2 locks held by kworker/u2:1/33:
#0: (kmmcd){.+.+..}, at: [<8003db18>] process_one_work+0x128/0x468
#1: ((&(&host->detect)->work)){+.+...}, at: [<8003db18>] process_one_work+0x128/0x468
stack backtrace:
CPU: 0 PID: 33 Comm: kworker/u2:1 Not tainted 3.13.0-rc1+ #287
Workqueue: kmmcd mmc_rescan
Backtrace:
[<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c)
r6:bfad0900 r5:00000000 r4:8088ecc8 r3:bfad0900
[<80012420>] (show_stack+0x0/0x1c) from [<806169ec>] (dump_stack+0x84/0x9c)
[<80616968>] (dump_stack+0x0/0x9c) from [<806147b4>] (print_usage_bug+0x260/0x2d0)
r5:8076ba88 r4:80977410
[<80614554>] (print_usage_bug+0x0/0x2d0) from [<8005f0d0>] (mark_lock+0x1e0/0x6ac)
r9:8005e678 r8:00000000 r7:bfad0900 r6:00001015 r5:bfad0cd0
r4:00000002
[<8005eef0>] (mark_lock+0x0/0x6ac) from [<80060234>] (__lock_acquire+0x604/0x1cbc)
[<8005fc30>] (__lock_acquire+0x0/0x1cbc) from [<800620d0>] (lock_acquire+0x70/0x84)
[<80062060>] (lock_acquire+0x0/0x84) from [<8061d1c8>] (_raw_spin_lock+0x30/0x40)
r7:00000000 r6:bfb63000 r5:00000000 r4:bfb60568
[<8061d198>] (_raw_spin_lock+0x0/0x40) from [<8045f7f4>] (sdhci_execute_tuning+0x4c/0x710)
r4:bfb60000
[<8045f7a8>] (sdhci_execute_tuning+0x0/0x710) from [<80453454>] (mmc_sd_init_card+0x5f8/0x660)
[<80452e5c>] (mmc_sd_init_card+0x0/0x660) from [<80453748>] (mmc_attach_sd+0xb4/0x180)
r9:bf92d400 r8:8065f364 r7:00061a80 r6:bfb60000 r5:8065f358
r4:bfb60000
[<80453694>] (mmc_attach_sd+0x0/0x180) from [<8044d9f8>] (mmc_rescan+0x284/0x2f0)
r5:8065f358 r4:bfb602f8
[<8044d774>] (mmc_rescan+0x0/0x2f0) from [<8003db94>] (process_one_work+0x1a4/0x468)
r8:00000000 r7:bfb55eb0 r6:bf80dc00 r5:bfb602f8 r4:bfb35980
r3:8044d774
[<8003d9f0>] (process_one_work+0x0/0x468) from [<8003e850>] (worker_thread+0x118/0x3e0)
[<8003e738>] (worker_thread+0x0/0x3e0) from [<80044de0>] (kthread+0xd4/0xf0)
[<80044d0c>] (kthread+0x0/0xf0) from [<8000e9c8>] (ret_from_fork+0x14/0x2c)
r7:00000000 r6:00000000 r5:80044d0c r4:bfb37b40
Signed-off-by: Dong Aisheng <[email protected]>
Signed-off-by: Chris Ball <[email protected]>
[bwh: Backported to 3.2:
- Adjust context
- There's no platform_execute_tuning hook]
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/mmc/host/sdhci.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a78bd4f..ea6c7d7 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1844,12 +1844,12 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
unsigned long timeout;
int err = 0;
bool requires_tuning_nonuhs = false;
+ unsigned long flags;
host = mmc_priv(mmc);
sdhci_runtime_pm_get(host);
- disable_irq(host->irq);
- spin_lock(&host->lock);
+ spin_lock_irqsave(&host->lock, flags);
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
@@ -1869,8 +1869,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
requires_tuning_nonuhs)
ctrl |= SDHCI_CTRL_EXEC_TUNING;
else {
- spin_unlock(&host->lock);
- enable_irq(host->irq);
+ spin_unlock_irqrestore(&host->lock, flags);
sdhci_runtime_pm_put(host);
return 0;
}
@@ -1942,15 +1941,12 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
host->cmd = NULL;
host->mrq = NULL;
- spin_unlock(&host->lock);
- enable_irq(host->irq);
-
+ spin_unlock_irqrestore(&host->lock, flags);
/* Wait for Buffer Read Ready interrupt */
wait_event_interruptible_timeout(host->buf_ready_int,
(host->tuning_done == 1),
msecs_to_jiffies(50));
- disable_irq(host->irq);
- spin_lock(&host->lock);
+ spin_lock_irqsave(&host->lock, flags);
if (!host->tuning_done) {
pr_info(DRIVER_NAME ": Timeout waiting for "
@@ -2024,8 +2020,7 @@ out:
err = 0;
sdhci_clear_set_irqs(host, SDHCI_INT_DATA_AVAIL, ier);
- spin_unlock(&host->lock);
- enable_irq(host->irq);
+ spin_unlock_irqrestore(&host->lock, flags);
sdhci_runtime_pm_put(host);
return err;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Simon Wood <[email protected]>
commit 114a55cf9dd1576e7ac56189832cd4d7dc56c218 upstream.
Re-arrange code slightly to ensure that device properties are configured
before calling auto-center command.
Reported-by: Michal Malý <[email protected]>
Signed-off-by: Simon Wood <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/hid/hid-lg4ff.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c
index 49f6cc0..3518053 100644
--- a/drivers/hid/hid-lg4ff.c
+++ b/drivers/hid/hid-lg4ff.c
@@ -574,17 +574,6 @@ int lg4ff_init(struct hid_device *hid)
if (error)
return error;
- /* Check if autocentering is available and
- * set the centering force to zero by default */
- if (test_bit(FF_AUTOCENTER, dev->ffbit)) {
- if (rev_maj == FFEX_REV_MAJ && rev_min == FFEX_REV_MIN) /* Formula Force EX expects different autocentering command */
- dev->ff->set_autocenter = hid_lg4ff_set_autocenter_ffex;
- else
- dev->ff->set_autocenter = hid_lg4ff_set_autocenter_default;
-
- dev->ff->set_autocenter(dev, 0);
- }
-
/* Get private driver data */
drv_data = hid_get_drvdata(hid);
if (!drv_data) {
@@ -605,6 +594,17 @@ int lg4ff_init(struct hid_device *hid)
entry->max_range = lg4ff_devices[i].max_range;
entry->set_range = lg4ff_devices[i].set_range;
+ /* Check if autocentering is available and
+ * set the centering force to zero by default */
+ if (test_bit(FF_AUTOCENTER, dev->ffbit)) {
+ if (rev_maj == FFEX_REV_MAJ && rev_min == FFEX_REV_MIN) /* Formula Force EX expects different autocentering command */
+ dev->ff->set_autocenter = hid_lg4ff_set_autocenter_ffex;
+ else
+ dev->ff->set_autocenter = hid_lg4ff_set_autocenter_default;
+
+ dev->ff->set_autocenter(dev, 0);
+ }
+
/* Create sysfs interface */
error = device_create_file(&hid->dev, &dev_attr_range);
if (error)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Artem Fetishev <[email protected]>
commit 825600c0f20e595daaa7a6dd8970f84fa2a2ee57 upstream.
On x86 uniprocessor systems topology_physical_package_id() returns -1
which causes rapl_cpu_prepare() to leave rapl_pmu variable uninitialized
which leads to GPF in rapl_pmu_init().
See arch/x86/kernel/cpu/perf_event_intel_rapl.c.
It turns out that physical_package_id and core_id can actually be
retreived for uniprocessor systems too. Enabling them also fixes
rapl_pmu code.
Signed-off-by: Artem Fetishev <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/include/asm/topology.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 095b215..60bd274 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -119,9 +119,10 @@ static inline void setup_node_to_cpumask_map(void) { }
extern const struct cpumask *cpu_coregroup_mask(int cpu);
-#ifdef ENABLE_TOPO_DEFINES
#define topology_physical_package_id(cpu) (cpu_data(cpu).phys_proc_id)
#define topology_core_id(cpu) (cpu_data(cpu).cpu_core_id)
+
+#ifdef ENABLE_TOPO_DEFINES
#define topology_core_cpumask(cpu) (per_cpu(cpu_core_map, cpu))
#define topology_thread_cpumask(cpu) (per_cpu(cpu_sibling_map, cpu))
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Kleine-Budde <[email protected]>
commit d96e43e8fce28cf97df576a07af9d65657a41a6f upstream.
This patch adds the missing netif_napi_del() to the flexcan_remove() function.
Signed-off-by: Marc Kleine-Budde <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/can/flexcan.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index bc30fd1..1e54c7f 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1213,6 +1213,7 @@ static int flexcan_remove(struct platform_device *pdev)
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(mem->start, resource_size(mem));
+ netif_napi_del(&priv->napi);
free_candev(dev);
return 0;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcelo Tosatti <[email protected]>
commit 37f6a4e237303549c8676dfe1fd1991ceab512eb upstream.
Rom Freiman <[email protected]> notes other code paths vulnerable to
bug fixed by 989c6b34f6a9480e397b.
Signed-off-by: Marcelo Tosatti <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/kvm/mmu.c | 9 +++++++++
arch/x86/kvm/paging_tmpl.h | 8 ++++++++
2 files changed, 17 insertions(+)
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 5239897..d320a6b 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2864,6 +2864,9 @@ static bool fast_page_fault(struct kvm_vcpu *vcpu, gva_t gva, int level,
bool ret = false;
u64 spte = 0ull;
+ if (!VALID_PAGE(vcpu->arch.mmu.root_hpa))
+ return false;
+
if (!page_fault_can_be_fast(vcpu, error_code))
return false;
@@ -3258,6 +3261,9 @@ static u64 walk_shadow_page_get_mmio_spte(struct kvm_vcpu *vcpu, u64 addr)
struct kvm_shadow_walk_iterator iterator;
u64 spte = 0ull;
+ if (!VALID_PAGE(vcpu->arch.mmu.root_hpa))
+ return spte;
+
walk_shadow_page_lockless_begin(vcpu);
for_each_shadow_entry_lockless(vcpu, addr, iterator, spte)
if (!is_shadow_present_pte(spte))
@@ -4528,6 +4534,9 @@ int kvm_mmu_get_spte_hierarchy(struct kvm_vcpu *vcpu, u64 addr, u64 sptes[4])
u64 spte;
int nr_sptes = 0;
+ if (!VALID_PAGE(vcpu->arch.mmu.root_hpa))
+ return nr_sptes;
+
walk_shadow_page_lockless_begin(vcpu);
for_each_shadow_entry_lockless(vcpu, addr, iterator, spte) {
sptes[iterator.level-1] = spte;
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 7769699..6b10d66 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -423,6 +423,9 @@ static int FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
if (FNAME(gpte_changed)(vcpu, gw, top_level))
goto out_gpte_changed;
+ if (!VALID_PAGE(vcpu->arch.mmu.root_hpa))
+ goto out_gpte_changed;
+
for (shadow_walk_init(&it, vcpu, addr);
shadow_walk_okay(&it) && it.level > gw->level;
shadow_walk_next(&it)) {
@@ -674,6 +677,11 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
*/
mmu_topup_memory_caches(vcpu);
+ if (!VALID_PAGE(vcpu->arch.mmu.root_hpa)) {
+ WARN_ON(1);
+ return;
+ }
+
spin_lock(&vcpu->kvm->mmu_lock);
for_each_shadow_entry(vcpu, gva, iterator) {
level = iterator.level;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit 324ed533bf0b23c309b805272c4ffcc5d51493a6 upstream.
We recently introduced some new error paths but the unlocks are missing.
Fixes: 0065a79a8698 ('[media] dw2102: Don't use dynamic static allocation')
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/media/usb/dvb-usb/dw2102.c | 52 ++++++++++++++++++++++++++------------
1 file changed, 36 insertions(+), 16 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c
index 71b22f5..4170a45 100644
--- a/drivers/media/usb/dvb-usb/dw2102.c
+++ b/drivers/media/usb/dvb-usb/dw2102.c
@@ -301,6 +301,7 @@ static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap,
static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int ret;
if (!d)
return -ENODEV;
@@ -316,7 +317,8 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms
if (2 + msg[1].len > sizeof(ibuf)) {
warn("i2c rd: len=%d is too big!\n",
msg[1].len);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto unlock;
}
obuf[0] = msg[0].addr << 1;
@@ -340,7 +342,8 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms
if (2 + msg[0].len > sizeof(obuf)) {
warn("i2c wr: len=%d is too big!\n",
msg[1].len);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto unlock;
}
obuf[0] = msg[0].addr << 1;
@@ -357,7 +360,8 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms
if (2 + msg[0].len > sizeof(obuf)) {
warn("i2c wr: len=%d is too big!\n",
msg[1].len);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto unlock;
}
obuf[0] = msg[0].addr << 1;
@@ -386,15 +390,17 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms
break;
}
+ ret = num;
+unlock:
mutex_unlock(&d->i2c_mutex);
- return num;
+ return ret;
}
static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
- int len, i, j;
+ int len, i, j, ret;
if (!d)
return -ENODEV;
@@ -430,7 +436,8 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i
if (2 + msg[j].len > sizeof(ibuf)) {
warn("i2c rd: len=%d is too big!\n",
msg[j].len);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto unlock;
}
dw210x_op_rw(d->udev, 0xc3,
@@ -466,7 +473,8 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i
if (2 + msg[j].len > sizeof(obuf)) {
warn("i2c wr: len=%d is too big!\n",
msg[j].len);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto unlock;
}
obuf[0] = msg[j].addr << 1;
@@ -481,15 +489,18 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i
}
}
+ ret = num;
+unlock:
mutex_unlock(&d->i2c_mutex);
- return num;
+ return ret;
}
static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int ret;
int i;
if (!d)
@@ -506,7 +517,8 @@ static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
if (2 + msg[1].len > sizeof(ibuf)) {
warn("i2c rd: len=%d is too big!\n",
msg[1].len);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto unlock;
}
obuf[0] = msg[0].addr << 1;
obuf[1] = msg[0].len;
@@ -530,7 +542,8 @@ static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
if (2 + msg[0].len > sizeof(obuf)) {
warn("i2c wr: len=%d is too big!\n",
msg[0].len);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto unlock;
}
obuf[0] = msg[0].addr << 1;
obuf[1] = msg[0].len;
@@ -556,9 +569,11 @@ static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
msg[i].flags == 0 ? ">>>" : "<<<");
debug_dump(msg[i].buf, msg[i].len, deb_xfer);
}
+ ret = num;
+unlock:
mutex_unlock(&d->i2c_mutex);
- return num;
+ return ret;
}
static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
@@ -566,7 +581,7 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
struct usb_device *udev;
- int len, i, j;
+ int len, i, j, ret;
if (!d)
return -ENODEV;
@@ -618,7 +633,8 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
if (msg[j].len > sizeof(ibuf)) {
warn("i2c rd: len=%d is too big!\n",
msg[j].len);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto unlock;
}
dw210x_op_rw(d->udev, 0x91, 0, 0,
@@ -652,7 +668,8 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
if (2 + msg[j].len > sizeof(obuf)) {
warn("i2c wr: len=%d is too big!\n",
msg[j].len);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto unlock;
}
obuf[0] = msg[j + 1].len;
@@ -671,7 +688,8 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
if (2 + msg[j].len > sizeof(obuf)) {
warn("i2c wr: len=%d is too big!\n",
msg[j].len);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto unlock;
}
obuf[0] = msg[j].len + 1;
obuf[1] = (msg[j].addr << 1);
@@ -685,9 +703,11 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
}
}
}
+ ret = num;
+unlock:
mutex_unlock(&d->i2c_mutex);
- return num;
+ return ret;
}
static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Rob Herring <[email protected]>
commit 0b53c11d533a8f6688d73fad0baf67dd08ec1b90 upstream.
Move the outer_cache declaration of the CONFIG_OUTER_CACHE ifdef so that
outer_cache can be used inside IS_ENABLED condition.
Signed-off-by: Rob Herring <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/include/asm/outercache.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
index 12f71a1..f94784f 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -37,10 +37,10 @@ struct outer_cache_fns {
void (*resume)(void);
};
-#ifdef CONFIG_OUTER_CACHE
-
extern struct outer_cache_fns outer_cache;
+#ifdef CONFIG_OUTER_CACHE
+
static inline void outer_inv_range(phys_addr_t start, phys_addr_t end)
{
if (outer_cache.inv_range)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexei Starovoitov <[email protected]>
commit fdfaf64e75397567257e1051931f9a3377360665 upstream.
Commit a998d4342337 claimed to introduce negative offset support to x86 jit,
but it couldn't be working, since at the time of the execution
of LD+ABS or LD+IND instructions via call into
bpf_internal_load_pointer_neg_helper() the %edx (3rd argument of this func)
had junk value instead of access size in bytes (1 or 2 or 4).
Store size into %edx instead of %ecx (what original commit intended to do)
Fixes: a998d4342337 ("bpf jit: Let the x86 jit handle negative offsets")
Signed-off-by: Alexei Starovoitov <[email protected]>
Cc: Jan Seiffert <[email protected]>
Cc: Eric Dumazet <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/net/bpf_jit.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/net/bpf_jit.S b/arch/x86/net/bpf_jit.S
index 877b9a1..0149575 100644
--- a/arch/x86/net/bpf_jit.S
+++ b/arch/x86/net/bpf_jit.S
@@ -140,7 +140,7 @@ bpf_slow_path_byte_msh:
push %r9; \
push SKBDATA; \
/* rsi already has offset */ \
- mov $SIZE,%ecx; /* size */ \
+ mov $SIZE,%edx; /* size */ \
call bpf_internal_load_pointer_neg_helper; \
test %rax,%rax; \
pop SKBDATA; \
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit 608cfbe4abaf76e9d732efd7ed1cfa3998163d91 upstream.
The call to clamp_t() first truncates the variable signed 8 bit and as a
result, the actual clamp is a no-op.
Fixes: 0d78156eef1d ('p54: improve site survey')
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/p54/txrx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c
index f95de0d..1de59b0 100644
--- a/drivers/net/wireless/p54/txrx.c
+++ b/drivers/net/wireless/p54/txrx.c
@@ -587,7 +587,7 @@ static void p54_rx_stats(struct p54_common *priv, struct sk_buff *skb)
chan = priv->curchan;
if (chan) {
struct survey_info *survey = &priv->survey[chan->hw_value];
- survey->noise = clamp_t(s8, priv->noise, -128, 127);
+ survey->noise = clamp(priv->noise, -128, 127);
survey->channel_time = priv->survey_raw.active;
survey->channel_time_tx = priv->survey_raw.tx;
survey->channel_time_busy = priv->survey_raw.tx +
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Durgin <[email protected]>
commit d29adb34a94715174c88ca93e8aba955850c9bde upstream.
The PAUSEWR and PAUSERD flags are meant to stop the cluster from
processing writes and reads, respectively. The FULL flag is set when
the cluster determines that it is out of space, and will no longer
process writes. PAUSEWR and PAUSERD are purely client-side settings
already implemented in userspace clients. The osd does nothing special
with these flags.
When the FULL flag is set, however, the osd responds to all writes
with -ENOSPC. For cephfs, this makes sense, but for rbd the block
layer translates this into EIO. If a cluster goes from full to
non-full quickly, a filesystem on top of rbd will not behave well,
since some writes succeed while others get EIO.
Fix this by blocking any writes when the FULL flag is set in the osd
client. This is the same strategy used by userspace, so apply it by
default. A follow-on patch makes this configurable.
__map_request() is called to re-target osd requests in case the
available osds changed. Add a paused field to a ceph_osd_request, and
set it whenever an appropriate osd map flag is set. Avoid queueing
paused requests in __map_request(), but force them to be resent if
they become unpaused.
Also subscribe to the next osd map from the monitor if any of these
flags are set, so paused requests can be unblocked as soon as
possible.
Fixes: http://tracker.ceph.com/issues/6079
Reviewed-by: Sage Weil <[email protected]>
Signed-off-by: Josh Durgin <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
include/linux/ceph/osd_client.h | 1 +
net/ceph/osd_client.c | 29 +++++++++++++++++++++++++++--
2 files changed, 28 insertions(+), 2 deletions(-)
diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h
index 8f47625..4fb6a89 100644
--- a/include/linux/ceph/osd_client.h
+++ b/include/linux/ceph/osd_client.h
@@ -138,6 +138,7 @@ struct ceph_osd_request {
__le64 *r_request_pool;
void *r_request_pgid;
__le32 *r_request_attempts;
+ bool r_paused;
struct ceph_eversion *r_request_reassert_version;
int r_result;
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 0da1b0f..bd87c39 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -1225,6 +1225,22 @@ void ceph_osdc_set_request_linger(struct ceph_osd_client *osdc,
EXPORT_SYMBOL(ceph_osdc_set_request_linger);
/*
+ * Returns whether a request should be blocked from being sent
+ * based on the current osdmap and osd_client settings.
+ *
+ * Caller should hold map_sem for read.
+ */
+static bool __req_should_be_paused(struct ceph_osd_client *osdc,
+ struct ceph_osd_request *req)
+{
+ bool pauserd = ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSERD);
+ bool pausewr = ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSEWR) ||
+ ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL);
+ return (req->r_flags & CEPH_OSD_FLAG_READ && pauserd) ||
+ (req->r_flags & CEPH_OSD_FLAG_WRITE && pausewr);
+}
+
+/*
* Pick an osd (the first 'up' osd in the pg), allocate the osd struct
* (as needed), and set the request r_osd appropriately. If there is
* no up osd, set r_osd to NULL. Move the request to the appropriate list
@@ -1241,6 +1257,7 @@ static int __map_request(struct ceph_osd_client *osdc,
int acting[CEPH_PG_MAX_SIZE];
int o = -1, num = 0;
int err;
+ bool was_paused;
dout("map_request %p tid %lld\n", req, req->r_tid);
err = ceph_calc_ceph_pg(&pgid, req->r_oid, osdc->osdmap,
@@ -1257,12 +1274,18 @@ static int __map_request(struct ceph_osd_client *osdc,
num = err;
}
+ was_paused = req->r_paused;
+ req->r_paused = __req_should_be_paused(osdc, req);
+ if (was_paused && !req->r_paused)
+ force_resend = 1;
+
if ((!force_resend &&
req->r_osd && req->r_osd->o_osd == o &&
req->r_sent >= req->r_osd->o_incarnation &&
req->r_num_pg_osds == num &&
memcmp(req->r_pg_osds, acting, sizeof(acting[0])*num) == 0) ||
- (req->r_osd == NULL && o == -1))
+ (req->r_osd == NULL && o == -1) ||
+ req->r_paused)
return 0; /* no change */
dout("map_request tid %llu pgid %lld.%x osd%d (was osd%d)\n",
@@ -1797,7 +1820,9 @@ done:
* we find out when we are no longer full and stop returning
* ENOSPC.
*/
- if (ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL))
+ if (ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL) ||
+ ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSERD) ||
+ ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSEWR))
ceph_monc_request_next_osdmap(&osdc->client->monc);
mutex_lock(&osdc->request_mutex);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit 1cdbcc5db4e6d51ce9bb1313195167cada9aa6e9 upstream.
We recently introduced some new error paths which are missing their
unlocks.
Fixes: 64f7ef8afbf8 ('[media] cxusb: Don't use dynamic static allocation')
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/media/usb/dvb-usb/cxusb.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c
index 20e345d..a1c641e 100644
--- a/drivers/media/usb/dvb-usb/cxusb.c
+++ b/drivers/media/usb/dvb-usb/cxusb.c
@@ -149,6 +149,7 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int ret;
int i;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
@@ -173,7 +174,8 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
if (1 + msg[i].len > sizeof(ibuf)) {
warn("i2c rd: len=%d is too big!\n",
msg[i].len);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto unlock;
}
obuf[0] = 0;
obuf[1] = msg[i].len;
@@ -193,12 +195,14 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
if (3 + msg[i].len > sizeof(obuf)) {
warn("i2c wr: len=%d is too big!\n",
msg[i].len);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto unlock;
}
if (1 + msg[i + 1].len > sizeof(ibuf)) {
warn("i2c rd: len=%d is too big!\n",
msg[i + 1].len);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto unlock;
}
obuf[0] = msg[i].len;
obuf[1] = msg[i+1].len;
@@ -223,7 +227,8 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
if (2 + msg[i].len > sizeof(obuf)) {
warn("i2c wr: len=%d is too big!\n",
msg[i].len);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto unlock;
}
obuf[0] = msg[i].addr;
obuf[1] = msg[i].len;
@@ -237,8 +242,14 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
}
}
+ if (i == num)
+ ret = num;
+ else
+ ret = -EREMOTEIO;
+
+unlock:
mutex_unlock(&d->i2c_mutex);
- return i == num ? num : -EREMOTEIO;
+ return ret;
}
static u32 cxusb_i2c_func(struct i2c_adapter *adapter)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit e351bf25fa373a3de0be2141b962c5c3c27006a2 upstream.
It upsets static checkers when we don't check for allocation failure. I
moved the memset() of "tv" earlier so we don't use uninitialized data on
error.
Fixes: 1d212cf0c2d8 ('[media] cx18: struct i2c_client is too big for stack')
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Andy Walls <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/media/pci/cx18/cx18-driver.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/media/pci/cx18/cx18-driver.c b/drivers/media/pci/cx18/cx18-driver.c
index 6386ced..91c694b 100644
--- a/drivers/media/pci/cx18/cx18-driver.c
+++ b/drivers/media/pci/cx18/cx18-driver.c
@@ -327,13 +327,16 @@ void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv)
struct i2c_client *c;
u8 eedata[256];
+ memset(tv, 0, sizeof(*tv));
+
c = kzalloc(sizeof(*c), GFP_KERNEL);
+ if (!c)
+ return;
strlcpy(c->name, "cx18 tveeprom tmp", sizeof(c->name));
c->adapter = &cx->i2c_adap[0];
c->addr = 0xa0 >> 1;
- memset(tv, 0, sizeof(*tv));
if (tveeprom_read(c, eedata, sizeof(eedata)))
goto ret;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Warren <[email protected]>
commit e126a646f77fdd66978785cb0a3a5e46b07aee2e upstream.
The REVISION_ID register is not currently marked readable. snd_soc_read()
refuses to read the register, and hence probe() fails.
Fixes: d4807ad2c4c0 ("regmap: Check readable regs in _regmap_read")
[exposed the bug, by checking for readability]
Fixes: 685e42154dcf ("ASoC: Replace max98090 Device Driver")
[left out this register from the readable list]
Signed-off-by: Stephen Warren <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/soc/codecs/max98090.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index b8f9fc5..29c3689 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -336,6 +336,7 @@ static bool max98090_readable_register(struct device *dev, unsigned int reg)
case M98090_REG_RECORD_TDM_SLOT:
case M98090_REG_SAMPLE_RATE:
case M98090_REG_DMIC34_BIQUAD_BASE ... M98090_REG_DMIC34_BIQUAD_BASE + 0x0E:
+ case M98090_REG_REVISION_ID:
return true;
default:
return false;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Durgin <[email protected]>
commit 9a1ea2dbff11547a8e664f143c1ffefc586a577a upstream.
With the current full handling, there is a race between osds and
clients getting the first map marked full. If the osd wins, it will
return -ENOSPC to any writes, but the client may already have writes
in flight. This results in the client getting the error and
propagating it up the stack. For rbd, the block layer turns this into
EIO, which can cause corruption in filesystems above it.
To avoid this race, osds are being changed to drop writes that came
from clients with an osdmap older than the last osdmap marked full.
In order for this to work, clients must resend all writes after they
encounter a full -> not full transition in the osdmap. osds will wait
for an updated map instead of processing a request from a client with
a newer map, so resent writes will not be dropped by the osd unless
there is another not full -> full transition.
This approach requires both osds and clients to be fixed to avoid the
race. Old clients talking to osds with this fix may hang instead of
returning EIO and potentially corrupting an fs. New clients talking to
old osds have the same behavior as before if they encounter this race.
Fixes: http://tracker.ceph.com/issues/6938
Reviewed-by: Sage Weil <[email protected]>
Signed-off-by: Josh Durgin <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/ceph/osd_client.c | 28 ++++++++++++++++++++++------
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index bd87c39..448e9d9 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -1629,14 +1629,17 @@ static void reset_changed_osds(struct ceph_osd_client *osdc)
*
* Caller should hold map_sem for read.
*/
-static void kick_requests(struct ceph_osd_client *osdc, int force_resend)
+static void kick_requests(struct ceph_osd_client *osdc, bool force_resend,
+ bool force_resend_writes)
{
struct ceph_osd_request *req, *nreq;
struct rb_node *p;
int needmap = 0;
int err;
+ bool force_resend_req;
- dout("kick_requests %s\n", force_resend ? " (force resend)" : "");
+ dout("kick_requests %s %s\n", force_resend ? " (force resend)" : "",
+ force_resend_writes ? " (force resend writes)" : "");
mutex_lock(&osdc->request_mutex);
for (p = rb_first(&osdc->requests); p; ) {
req = rb_entry(p, struct ceph_osd_request, r_node);
@@ -1661,7 +1664,10 @@ static void kick_requests(struct ceph_osd_client *osdc, int force_resend)
continue;
}
- err = __map_request(osdc, req, force_resend);
+ force_resend_req = force_resend ||
+ (force_resend_writes &&
+ req->r_flags & CEPH_OSD_FLAG_WRITE);
+ err = __map_request(osdc, req, force_resend_req);
if (err < 0)
continue; /* error */
if (req->r_osd == NULL) {
@@ -1681,7 +1687,8 @@ static void kick_requests(struct ceph_osd_client *osdc, int force_resend)
r_linger_item) {
dout("linger req=%p req->r_osd=%p\n", req, req->r_osd);
- err = __map_request(osdc, req, force_resend);
+ err = __map_request(osdc, req,
+ force_resend || force_resend_writes);
dout("__map_request returned %d\n", err);
if (err == 0)
continue; /* no change and no osd was specified */
@@ -1723,6 +1730,7 @@ void ceph_osdc_handle_map(struct ceph_osd_client *osdc, struct ceph_msg *msg)
struct ceph_osdmap *newmap = NULL, *oldmap;
int err;
struct ceph_fsid fsid;
+ bool was_full;
dout("handle_map have %u\n", osdc->osdmap ? osdc->osdmap->epoch : 0);
p = msg->front.iov_base;
@@ -1736,6 +1744,8 @@ void ceph_osdc_handle_map(struct ceph_osd_client *osdc, struct ceph_msg *msg)
down_write(&osdc->map_sem);
+ was_full = ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL);
+
/* incremental maps */
ceph_decode_32_safe(&p, end, nr_maps, bad);
dout(" %d inc maps\n", nr_maps);
@@ -1760,7 +1770,10 @@ void ceph_osdc_handle_map(struct ceph_osd_client *osdc, struct ceph_msg *msg)
ceph_osdmap_destroy(osdc->osdmap);
osdc->osdmap = newmap;
}
- kick_requests(osdc, 0);
+ was_full = was_full ||
+ ceph_osdmap_flag(osdc->osdmap,
+ CEPH_OSDMAP_FULL);
+ kick_requests(osdc, 0, was_full);
} else {
dout("ignoring incremental map %u len %d\n",
epoch, maplen);
@@ -1803,7 +1816,10 @@ void ceph_osdc_handle_map(struct ceph_osd_client *osdc, struct ceph_msg *msg)
skipped_map = 1;
ceph_osdmap_destroy(oldmap);
}
- kick_requests(osdc, skipped_map);
+ was_full = was_full ||
+ ceph_osdmap_flag(osdc->osdmap,
+ CEPH_OSDMAP_FULL);
+ kick_requests(osdc, skipped_map, was_full);
}
p += maplen;
nr_maps--;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Dryomov <[email protected]>
commit 3cea4c3071d4e55e9d7356efe9d0ebf92f0c2204 upstream.
Rename front_max field of struct ceph_msg to front_alloc_len to make
its purpose more clear.
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Sage Weil <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
include/linux/ceph/messenger.h | 2 +-
net/ceph/messenger.c | 6 +++---
net/ceph/mon_client.c | 8 ++++----
3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h
index 7c1420b..6ade97d 100644
--- a/include/linux/ceph/messenger.h
+++ b/include/linux/ceph/messenger.h
@@ -157,7 +157,7 @@ struct ceph_msg {
bool front_is_vmalloc;
bool more_to_follow;
bool needs_out_seq;
- int front_max;
+ int front_alloc_len;
unsigned long ack_stamp; /* tx: when we were acked */
struct ceph_msgpool *pool;
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index eb0a46a..a9226b7 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -3126,7 +3126,7 @@ struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags,
INIT_LIST_HEAD(&m->data);
/* front */
- m->front_max = front_len;
+ m->front_alloc_len = front_len;
if (front_len) {
if (front_len > PAGE_CACHE_SIZE) {
m->front.iov_base = __vmalloc(front_len, flags,
@@ -3301,8 +3301,8 @@ EXPORT_SYMBOL(ceph_msg_last_put);
void ceph_msg_dump(struct ceph_msg *msg)
{
- pr_debug("msg_dump %p (front_max %d length %zd)\n", msg,
- msg->front_max, msg->data_length);
+ pr_debug("msg_dump %p (front_alloc_len %d length %zd)\n", msg,
+ msg->front_alloc_len, msg->data_length);
print_hex_dump(KERN_DEBUG, "header: ",
DUMP_PREFIX_OFFSET, 16, 1,
&msg->hdr, sizeof(msg->hdr), true);
diff --git a/net/ceph/mon_client.c b/net/ceph/mon_client.c
index 1fe25cd..2ac9ef3 100644
--- a/net/ceph/mon_client.c
+++ b/net/ceph/mon_client.c
@@ -152,7 +152,7 @@ static int __open_session(struct ceph_mon_client *monc)
/* initiatiate authentication handshake */
ret = ceph_auth_build_hello(monc->auth,
monc->m_auth->front.iov_base,
- monc->m_auth->front_max);
+ monc->m_auth->front_alloc_len);
__send_prepared_auth_request(monc, ret);
} else {
dout("open_session mon%d already open\n", monc->cur_mon);
@@ -196,7 +196,7 @@ static void __send_subscribe(struct ceph_mon_client *monc)
int num;
p = msg->front.iov_base;
- end = p + msg->front_max;
+ end = p + msg->front_alloc_len;
num = 1 + !!monc->want_next_osdmap + !!monc->want_mdsmap;
ceph_encode_32(&p, num);
@@ -897,7 +897,7 @@ static void handle_auth_reply(struct ceph_mon_client *monc,
ret = ceph_handle_auth_reply(monc->auth, msg->front.iov_base,
msg->front.iov_len,
monc->m_auth->front.iov_base,
- monc->m_auth->front_max);
+ monc->m_auth->front_alloc_len);
if (ret < 0) {
monc->client->auth_err = ret;
wake_up_all(&monc->client->auth_wq);
@@ -939,7 +939,7 @@ static int __validate_auth(struct ceph_mon_client *monc)
return 0;
ret = ceph_build_auth(monc->auth, monc->m_auth->front.iov_base,
- monc->m_auth->front_max);
+ monc->m_auth->front_alloc_len);
if (ret <= 0)
return ret; /* either an error, or no need to authenticate */
__send_prepared_auth_request(monc, ret);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Dryomov <[email protected]>
commit 3f0a4ac55fe036902e3666be740da63528ad8639 upstream.
Rename front local variable to front_len in get_reply() to make its
purpose more clear.
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Sage Weil <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/ceph/osd_client.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 1ee21cd..47eaf53 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -2447,7 +2447,7 @@ static struct ceph_msg *get_reply(struct ceph_connection *con,
struct ceph_osd_client *osdc = osd->o_osdc;
struct ceph_msg *m;
struct ceph_osd_request *req;
- int front = le32_to_cpu(hdr->front_len);
+ int front_len = le32_to_cpu(hdr->front_len);
int data_len = le32_to_cpu(hdr->data_len);
u64 tid;
@@ -2467,12 +2467,13 @@ static struct ceph_msg *get_reply(struct ceph_connection *con,
req->r_reply, req->r_reply->con);
ceph_msg_revoke_incoming(req->r_reply);
- if (front > req->r_reply->front.iov_len) {
+ if (front_len > req->r_reply->front.iov_len) {
pr_warning("get_reply front %d > preallocated %d (%u#%llu)\n",
- front, (int)req->r_reply->front.iov_len,
+ front_len, (int)req->r_reply->front.iov_len,
(unsigned int)con->peer_name.type,
le64_to_cpu(con->peer_name.num));
- m = ceph_msg_new(CEPH_MSG_OSD_OPREPLY, front, GFP_NOFS, false);
+ m = ceph_msg_new(CEPH_MSG_OSD_OPREPLY, front_len, GFP_NOFS,
+ false);
if (!m)
goto out;
ceph_msg_put(req->r_reply);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Dryomov <[email protected]>
commit f2be82b0058e90b5d9ac2cb896b4914276fb50ef upstream.
The check that makes sure that we have enough memory allocated to read
in the entire header of the message in question is currently busted.
It compares front_len of the incoming message with iov_len field of
ceph_msg::front structure, which is used primarily to indicate the
amount of data already read in, and not the size of the allocated
buffer. Under certain conditions (e.g. a short read from a socket
followed by that socket's shutdown and owning ceph_connection reset)
this results in a warning similar to
[85688.975866] libceph: get_reply front 198 > preallocated 122 (4#0)
and, through another bug, leads to forever hung tasks and forced
reboots. Fix this by comparing front_len with front_alloc_len field of
struct ceph_msg, which stores the actual size of the buffer.
Fixes: http://tracker.ceph.com/issues/5425
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Sage Weil <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/ceph/messenger.c | 3 +--
net/ceph/osd_client.c | 4 ++--
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index a9226b7..f857968 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -3126,7 +3126,6 @@ struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags,
INIT_LIST_HEAD(&m->data);
/* front */
- m->front_alloc_len = front_len;
if (front_len) {
if (front_len > PAGE_CACHE_SIZE) {
m->front.iov_base = __vmalloc(front_len, flags,
@@ -3143,7 +3142,7 @@ struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags,
} else {
m->front.iov_base = NULL;
}
- m->front.iov_len = front_len;
+ m->front_alloc_len = m->front.iov_len = front_len;
dout("ceph_msg_new %p front %d\n", m, front_len);
return m;
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 47eaf53..0da1b0f 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -2467,9 +2467,9 @@ static struct ceph_msg *get_reply(struct ceph_connection *con,
req->r_reply, req->r_reply->con);
ceph_msg_revoke_incoming(req->r_reply);
- if (front_len > req->r_reply->front.iov_len) {
+ if (front_len > req->r_reply->front_alloc_len) {
pr_warning("get_reply front %d > preallocated %d (%u#%llu)\n",
- front_len, (int)req->r_reply->front.iov_len,
+ front_len, req->r_reply->front_alloc_len,
(unsigned int)con->peer_name.type,
le64_to_cpu(con->peer_name.num));
m = ceph_msg_new(CEPH_MSG_OSD_OPREPLY, front_len, GFP_NOFS,
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <[email protected]>
commit 00a1a053ebe5febcfc2ec498bd894f035ad2aa06 upstream.
Use cmpxchg() to atomically set i_flags instead of clearing out the
S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the
EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race
where an immutable file has the immutable flag cleared for a brief
window of time.
Reported-by: John Sullivan <[email protected]>
Signed-off-by: "Theodore Ts'o" <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/ext4/inode.c | 15 +++++++++------
include/linux/bitops.h | 15 +++++++++++++++
2 files changed, 24 insertions(+), 6 deletions(-)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 0ea5961..e2dc5c4 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -38,6 +38,7 @@
#include <linux/slab.h>
#include <linux/ratelimit.h>
#include <linux/aio.h>
+#include <linux/bitops.h>
#include "ext4_jbd2.h"
#include "xattr.h"
@@ -3937,18 +3938,20 @@ int ext4_get_inode_loc(struct inode *inode, struct ext4_iloc *iloc)
void ext4_set_inode_flags(struct inode *inode)
{
unsigned int flags = EXT4_I(inode)->i_flags;
+ unsigned int new_fl = 0;
- inode->i_flags &= ~(S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC);
if (flags & EXT4_SYNC_FL)
- inode->i_flags |= S_SYNC;
+ new_fl |= S_SYNC;
if (flags & EXT4_APPEND_FL)
- inode->i_flags |= S_APPEND;
+ new_fl |= S_APPEND;
if (flags & EXT4_IMMUTABLE_FL)
- inode->i_flags |= S_IMMUTABLE;
+ new_fl |= S_IMMUTABLE;
if (flags & EXT4_NOATIME_FL)
- inode->i_flags |= S_NOATIME;
+ new_fl |= S_NOATIME;
if (flags & EXT4_DIRSYNC_FL)
- inode->i_flags |= S_DIRSYNC;
+ new_fl |= S_DIRSYNC;
+ set_mask_bits(&inode->i_flags,
+ S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC, new_fl);
}
/* Propagate flags from i_flags to EXT4_I(inode)->i_flags */
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
index a3b6b82..c1dde8e 100644
--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -185,6 +185,21 @@ static inline unsigned long __ffs64(u64 word)
#ifdef __KERNEL__
+#ifndef set_mask_bits
+#define set_mask_bits(ptr, _mask, _bits) \
+({ \
+ const typeof(*ptr) mask = (_mask), bits = (_bits); \
+ typeof(*ptr) old, new; \
+ \
+ do { \
+ old = ACCESS_ONCE(*ptr); \
+ new = (old & ~mask) | bits; \
+ } while (cmpxchg(ptr, old, new) != old); \
+ \
+ new; \
+})
+#endif
+
#ifndef find_last_bit
/**
* find_last_bit - find the last set bit in a memory region
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Tissoires <[email protected]>
commit 421e08c41fda1f0c2ff6af81a67b491389b653a5 upstream.
The new Lenovo Haswell series (-40's) contains a new Synaptics touchpad.
However, these new Synaptics devices report bad axis ranges.
Under Windows, it is not a problem because the Windows driver uses RMI4
over SMBus to talk to the device. Under Linux, we are using the PS/2
fallback interface and it occurs the reported ranges are wrong.
Of course, it would be too easy to have only one range for the whole
series, each touchpad seems to be calibrated in a different way.
We can not use SMBus to get the actual range because I suspect the firmware
will switch into the SMBus mode and stop talking through PS/2 (this is the
case for hybrid HID over I2C / PS/2 Synaptics touchpads).
So as a temporary solution (until RMI4 land into upstream), start a new
list of quirks with the min/max manually set.
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/input/mouse/synaptics.c | 47 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index b2420ae..1844ce0 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -265,11 +265,22 @@ static int synaptics_identify(struct psmouse *psmouse)
* Read touchpad resolution and maximum reported coordinates
* Resolution is left zero if touchpad does not support the query
*/
+
+static const int *quirk_min_max;
+
static int synaptics_resolution(struct psmouse *psmouse)
{
struct synaptics_data *priv = psmouse->private;
unsigned char resp[3];
+ if (quirk_min_max) {
+ priv->x_min = quirk_min_max[0];
+ priv->x_max = quirk_min_max[1];
+ priv->y_min = quirk_min_max[2];
+ priv->y_max = quirk_min_max[3];
+ return 0;
+ }
+
if (SYN_ID_MAJOR(priv->identity) < 4)
return 0;
@@ -1485,10 +1496,46 @@ static const struct dmi_system_id __initconst olpc_dmi_table[] = {
{ }
};
+static const struct dmi_system_id min_max_dmi_table[] __initconst = {
+#if defined(CONFIG_DMI)
+ {
+ /* Lenovo ThinkPad Helix */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Helix"),
+ },
+ .driver_data = (int []){1024, 5052, 2258, 4832},
+ },
+ {
+ /* Lenovo ThinkPad T440s */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T440"),
+ },
+ .driver_data = (int []){1024, 5112, 2024, 4832},
+ },
+ {
+ /* Lenovo ThinkPad T540p */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T540"),
+ },
+ .driver_data = (int []){1024, 5056, 2058, 4832},
+ },
+#endif
+ { }
+};
+
void __init synaptics_module_init(void)
{
+ const struct dmi_system_id *min_max_dmi;
+
impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table);
broken_olpc_ec = dmi_check_system(olpc_dmi_table);
+
+ min_max_dmi = dmi_first_match(min_max_dmi_table);
+ if (min_max_dmi)
+ quirk_min_max = min_max_dmi->driver_data;
}
static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
commit 8a0435d958fb36d93b8df610124a0e91e5675c82 upstream.
This extends Benjamin Tissoires manual min/max quirk table with support for
the ThinkPad X240.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/input/mouse/synaptics.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 1844ce0..c69c816 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -1507,6 +1507,14 @@ static const struct dmi_system_id min_max_dmi_table[] __initconst = {
.driver_data = (int []){1024, 5052, 2258, 4832},
},
{
+ /* Lenovo ThinkPad X240 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X240"),
+ },
+ .driver_data = (int []){1232, 5710, 1156, 4696},
+ },
+ {
/* Lenovo ThinkPad T440s */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Torvalds <[email protected]>
commit e4178d809fdaee32a56833fff1f5056c99e90a1a upstream.
This is not a buffer overflow in the traditional sense: we don't
overflow any *kernel* buffers, but we do mis-count the amount of data we
copy back to user space for the SYSLOG_ACTION_READ_ALL case.
In particular, if the user buffer is too small to hold everything, and
*if* there is a continuation line at just the right place, we can end up
giving the user more data than he asked for.
The reason is that we first count up the number of bytes all the log
records contains, then we walk the records again until we've skipped the
records at the beginning that won't fit, and then we walk the rest of
the records and copy them to the user space buffer.
And in between that "skip the initial records that won't fit" and the
"copy the records that *will* fit to user space", we reset the 'prev'
variable that contained the record information for the last record not
copied. That meant that when we started copying to user space, we now
had a different character count than what we had originally calculated
in the first record walk-through.
The fix is to simply not clear the 'prev' flags value (in both cases
where we had the same logic: syslog_print_all and kmsg_dump_get_buffer:
the latter is used for pstore-like dumping)
Reported-and-tested-by: Debabrata Banerjee <[email protected]>
Acked-by: Kay Sievers <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jeff Mahoney <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Cc: Josh Hunt <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/printk/printk.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 5b5a708..41832ed 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -1080,7 +1080,6 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
next_seq = log_next_seq;
len = 0;
- prev = 0;
while (len >= 0 && seq < next_seq) {
struct printk_log *msg = log_from_idx(idx);
int textlen;
@@ -2783,7 +2782,6 @@ bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
next_idx = idx;
l = 0;
- prev = 0;
while (seq < dumper->next_seq) {
struct printk_log *msg = log_from_idx(idx);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Petazzoni <[email protected]>
commit a79121d3b57e7ad61f0b5d23eae05214054f3ccd upstream.
Bit 3 of the MVNETA_GMAC_CTRL_2 is actually used to enable the PCS,
not the PSC: there was a typo in the name of the define, which this
commit fixes.
Signed-off-by: Thomas Petazzoni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/marvell/mvneta.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 90ab292..b8aea9a 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -121,7 +121,7 @@
#define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc
#define MVNETA_GMAC0_PORT_ENABLE BIT(0)
#define MVNETA_GMAC_CTRL_2 0x2c08
-#define MVNETA_GMAC2_PSC_ENABLE BIT(3)
+#define MVNETA_GMAC2_PCS_ENABLE BIT(3)
#define MVNETA_GMAC2_PORT_RGMII BIT(4)
#define MVNETA_GMAC2_PORT_RESET BIT(6)
#define MVNETA_GMAC_STATUS 0x2c10
@@ -657,7 +657,7 @@ static void mvneta_port_sgmii_config(struct mvneta_port *pp)
u32 val;
val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
- val |= MVNETA_GMAC2_PSC_ENABLE;
+ val |= MVNETA_GMAC2_PCS_ENABLE;
mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
mvreg_write(pp, MVNETA_SGMII_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Kerrisk <[email protected]>
commit 4f87dac386cc43d5525da7a939d4b4e7edbea22c upstream.
While testing and documenting the msgrcv() MSG_COPY flag that Stanislav
Kinsbursky added in commit 4a674f34ba04 ("ipc: introduce message queue
copy feature" => kernel 3.8), I discovered a couple of bugs in the
implementation. The two bugs concern MSG_COPY interactions with other
msgrcv() flags, namely:
(A) MSG_COPY + MSG_EXCEPT
(B) MSG_COPY + !IPC_NOWAIT
The bugs are distinct (and the fix for the first one is obvious),
however my fix for both is a single-line patch, which is why I'm
combining them in a single mail, rather than writing two mails+patches.
===== (A) MSG_COPY + MSG_EXCEPT =====
With the addition of the MSG_COPY flag, there are now two msgrcv()
flags--MSG_COPY and MSG_EXCEPT--that modify the meaning of the 'msgtyp'
argument in unrelated ways. Specifying both in the same call is a
logical error that is currently permitted, with the effect that MSG_COPY
has priority and MSG_EXCEPT is ignored. The call should give an error
if both flags are specified. The patch below implements that behavior.
===== (B) (B) MSG_COPY + !IPC_NOWAIT =====
The test code that was submitted in commit 3a665531a3b7 ("selftests: IPC
message queue copy feature test") shows MSG_COPY being used in
conjunction with IPC_NOWAIT. In other words, if there is no message at
the position 'msgtyp'. return immediately with the error in ENOMSG.
What was not (fully) tested is the behavior if MSG_COPY is specified
*without* IPC_NOWAIT, and there is an odd behavior. If the queue
contains less than 'msgtyp' messages, then the call blocks until the
next message is written to the queue. At that point, the msgrcv() call
returns a copy of the newly added message, regardless of whether that
message is at the ordinal position 'msgtyp'. This is clearly bogus, and
problematic for applications that might want to make use of the MSG_COPY
flag.
I considered the following possible solutions to this problem:
(1) Force the call to block until a message *does* appear at the
position 'msgtyp'.
(2) If the MSG_COPY flag is specified, the kernel should implicitly add
IPC_NOWAIT, so that the call fails with ENOMSG for this case.
(3) If the MSG_COPY flag is specified, but IPC_NOWAIT is not, generate
an error (probably, EINVAL is the right one).
I do not know if any application would really want to have the
functionality of solution (1), especially since an application can
determine in advance the number of messages in the queue using msgctl()
IPC_STAT. Obviously, this solution would be the most work to implement.
Solution (2) would have the effect of silently fixing any applications
that tried to employ broken behavior. However, it would mean that if we
later decided to implement solution (1), then user-space could not
easily detect what the kernel supports (but, since I'm somewhat doubtful
that solution (1) is needed, I'm not sure that this is much of a
problem).
Solution (3) would have the effect of informing broken applications that
they are doing something broken. The downside is that this would cause
a ABI breakage for any applications that are currently employing the
broken behavior. However:
a) Those applications are almost certainly not getting the results they
expect.
b) Possibly, those applications don't even exist, because MSG_COPY is
currently hidden behind CONFIG_CHECKPOINT_RESTORE.
The upside of solution (3) is that if we later decided to implement
solution (1), user-space could determine what the kernel supports, via
the error return.
In my view, solution (3) is mildly preferable to solution (2), and
solution (1) could still be done later if anyone really cares. The
patch below implements solution (3).
PS. For anyone out there still listening, it's the usual story:
documenting an API (and the thinking about, and the testing of the API,
that documentation entails) is the one of the single best ways of
finding bugs in the API, as I've learned from a lot of experience. Best
to do that documentation before releasing the API.
Signed-off-by: Michael Kerrisk <[email protected]>
Acked-by: Stanislav Kinsbursky <[email protected]>
Cc: Stanislav Kinsbursky <[email protected]>
Cc: Serge Hallyn <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Cc: Al Viro <[email protected]>
Cc: KOSAKI Motohiro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
ipc/msg.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/ipc/msg.c b/ipc/msg.c
index 558aa91..52770bf 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -885,6 +885,8 @@ long do_msgrcv(int msqid, void __user *buf, size_t bufsz, long msgtyp, int msgfl
return -EINVAL;
if (msgflg & MSG_COPY) {
+ if ((msgflg & MSG_EXCEPT) || !(msgflg & IPC_NOWAIT))
+ return -EINVAL;
copy = prepare_copy(buf, min_t(size_t, bufsz, ns->msg_ctlmax));
if (IS_ERR(copy))
return PTR_ERR(copy);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Scott Wood <[email protected]>
commit 5f12c5eca6e6b7aeb4b2028d579f614b4fe7a81f upstream.
Fixes a build break due to the undeclared use of irq_of_parse_and_map()
and of_iomap(). This build break was apparently introduced while the
driver was unbuildable due to the bug fixed by
62c19c9d29e65086e5ae76df371ed2e6b23f00cd ("i2c: Remove usage of
orphaned symbol OF_I2C"). When 62c19c was added in v3.14-rc7,
the driver was enabled again, breaking the powerpc mpc85xx_defconfig
and mpc85xx_smp_defconfig.
62c19c is marked for stable, so this should go there as well.
Reported-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Scott Wood <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/i2c/busses/i2c-cpm.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 2e1f7eb..faf9414 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -40,7 +40,9 @@
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
+#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_i2c.h>
#include <sysdev/fsl_soc.h>
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Riesch <[email protected]>
commit 33b7107f59a61236d94ecd6b45e20283cd5abcc8 upstream.
In commit 6892b41d9701283085b655c6086fb57a5d63fa47
Author: Lad, Prabhakar <[email protected]>
Date: Tue Jun 25 21:24:51 2013 +0530
net: davinci: emac: Convert to devm_* api
the call of request_irq is replaced by devm_request_irq and the call
of free_irq is removed. But since interrupts are requested in
emac_dev_open, doing ifconfig up/down on the board requests the
interrupts again each time, causing devm_request_irq to fail. The
interface is dead until the device is rebooted.
This patch reverts said commit partially: It changes the driver back
to use request_irq instead of devm_request_irq, puts free_irq back in
place, but keeps the remaining changes of the original patch.
Reported-by: Jon Ringle <[email protected]>
Signed-off-by: Christian Riesch <[email protected]>
Cc: Lad, Prabhakar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/ti/davinci_emac.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 45c167f..b5a36315 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1531,7 +1531,7 @@ static int emac_dev_open(struct net_device *ndev)
struct device *emac_dev = &ndev->dev;
u32 cnt;
struct resource *res;
- int ret;
+ int q, m, ret;
int i = 0;
int k = 0;
struct emac_priv *priv = netdev_priv(ndev);
@@ -1566,8 +1566,7 @@ static int emac_dev_open(struct net_device *ndev)
while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) {
for (i = res->start; i <= res->end; i++) {
- if (devm_request_irq(&priv->pdev->dev, i, emac_irq,
- 0, ndev->name, ndev))
+ if (request_irq(i, emac_irq, 0, ndev->name, ndev))
goto rollback;
}
k++;
@@ -1640,7 +1639,15 @@ static int emac_dev_open(struct net_device *ndev)
rollback:
- dev_err(emac_dev, "DaVinci EMAC: devm_request_irq() failed");
+ dev_err(emac_dev, "DaVinci EMAC: request_irq() failed");
+
+ for (q = k; k >= 0; k--) {
+ for (m = i; m >= res->start; m--)
+ free_irq(m, ndev);
+ res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k-1);
+ m = res->end;
+ }
+
ret = -EBUSY;
err:
pm_runtime_put(&priv->pdev->dev);
@@ -1658,6 +1665,9 @@ err:
*/
static int emac_dev_stop(struct net_device *ndev)
{
+ struct resource *res;
+ int i = 0;
+ int irq_num;
struct emac_priv *priv = netdev_priv(ndev);
struct device *emac_dev = &ndev->dev;
@@ -1673,6 +1683,13 @@ static int emac_dev_stop(struct net_device *ndev)
if (priv->phydev)
phy_disconnect(priv->phydev);
+ /* Free IRQ */
+ while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) {
+ for (irq_num = res->start; irq_num <= res->end; irq_num++)
+ free_irq(irq_num, priv->ndev);
+ i++;
+ }
+
if (netif_msg_drv(priv))
dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Wilson <[email protected]>
commit 0f4706d2740f2a221cd502922b22e522009041d9 upstream.
We have reports of heavy screen corruption if we try to use the stolen
memory reserved by the BIOS whilst the DMA-Remapper is active. This
quirk may be only specific to a few machines or BIOSes, but first lets
apply the big hammer and always disable use of stolen memory when DMAR
is active.
v2 by Jani: Rebase on -fixes, only look at intel_iommu_gfx_mapped.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68535
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/i915/i915_gem_stolen.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index 4047e3b..4f04b02 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -191,6 +191,13 @@ int i915_gem_init_stolen(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
int bios_reserved = 0;
+#ifdef CONFIG_INTEL_IOMMU
+ if (intel_iommu_gfx_mapped) {
+ DRM_INFO("DMAR active, disabling use of stolen memory\n");
+ return 0;
+ }
+#endif
+
dev_priv->mm.stolen_base = i915_stolen_to_physical(dev);
if (dev_priv->mm.stolen_base == 0)
return 0;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Vaibhav Nagarnaik <[email protected]>
commit 87291347c49dc40aa339f587b209618201c2e527 upstream.
In event format strings, the array size is reported in two locations.
One in array subscript and then via the "size:" attribute. The values
reported there have a mismatch.
For e.g., in sched:sched_switch the prev_comm and next_comm character
arrays have subscript values as [32] where as the actual field size is
16.
name: sched_switch
ID: 301
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1;signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[32]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[32]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
After bisection, the following commit was blamed:
92edca0 tracing: Use direct field, type and system names
This commit removes the duplication of strings for field->name and
field->type assuming that all the strings passed in
__trace_define_field() are immutable. This is not true for arrays, where
the type string is created in event_storage variable and field->type for
all array fields points to event_storage.
Use __stringify() to create a string constant for the type string.
Also, get rid of event_storage and event_storage_mutex that are not
needed anymore.
also, an added benefit is that this reduces the overhead of events a bit more:
text data bss dec hex filename
8424787 2036472 1302528 11763787 b3804b vmlinux
8420814 2036408 1302528 11759750 b37086 vmlinux.patched
Link: http://lkml.kernel.org/r/[email protected]
Cc: Laurent Chavey <[email protected]>
Signed-off-by: Vaibhav Nagarnaik <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
include/linux/ftrace_event.h | 4 ----
include/trace/ftrace.h | 7 ++-----
kernel/trace/trace_events.c | 6 ------
kernel/trace/trace_export.c | 7 ++-----
4 files changed, 4 insertions(+), 20 deletions(-)
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 120d57a..b5e3601 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -325,10 +325,6 @@ enum {
FILTER_TRACE_FN,
};
-#define EVENT_STORAGE_SIZE 128
-extern struct mutex event_storage_mutex;
-extern char event_storage[EVENT_STORAGE_SIZE];
-
extern int trace_event_raw_init(struct ftrace_event_call *call);
extern int trace_define_field(struct ftrace_event_call *call, const char *type,
const char *name, int offset, int size,
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index ef0a427..27ae288 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -303,15 +303,12 @@ static struct trace_event_functions ftrace_event_type_funcs_##call = { \
#undef __array
#define __array(type, item, len) \
do { \
- mutex_lock(&event_storage_mutex); \
+ char *type_str = #type"["__stringify(len)"]"; \
BUILD_BUG_ON(len > MAX_FILTER_STR_VAL); \
- snprintf(event_storage, sizeof(event_storage), \
- "%s[%d]", #type, len); \
- ret = trace_define_field(event_call, event_storage, #item, \
+ ret = trace_define_field(event_call, type_str, #item, \
offsetof(typeof(field), item), \
sizeof(field.item), \
is_signed_type(type), FILTER_OTHER); \
- mutex_unlock(&event_storage_mutex); \
if (ret) \
return ret; \
} while (0);
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 34b821f..6ccd39e 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -27,12 +27,6 @@
DEFINE_MUTEX(event_mutex);
-DEFINE_MUTEX(event_storage_mutex);
-EXPORT_SYMBOL_GPL(event_storage_mutex);
-
-char event_storage[EVENT_STORAGE_SIZE];
-EXPORT_SYMBOL_GPL(event_storage);
-
LIST_HEAD(ftrace_events);
static LIST_HEAD(ftrace_common_fields);
diff --git a/kernel/trace/trace_export.c b/kernel/trace/trace_export.c
index d21a746..d7d0b50 100644
--- a/kernel/trace/trace_export.c
+++ b/kernel/trace/trace_export.c
@@ -95,15 +95,12 @@ static void __always_unused ____ftrace_check_##name(void) \
#undef __array
#define __array(type, item, len) \
do { \
+ char *type_str = #type"["__stringify(len)"]"; \
BUILD_BUG_ON(len > MAX_FILTER_STR_VAL); \
- mutex_lock(&event_storage_mutex); \
- snprintf(event_storage, sizeof(event_storage), \
- "%s[%d]", #type, len); \
- ret = trace_define_field(event_call, event_storage, #item, \
+ ret = trace_define_field(event_call, type_str, #item, \
offsetof(typeof(field), item), \
sizeof(field.item), \
is_signed_type(type), filter_type); \
- mutex_unlock(&event_storage_mutex); \
if (ret) \
return ret; \
} while (0);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Agner <[email protected]>
commit 224aa3ed45c8735ae02bb2ecca002409fa6aa772 upstream.
Vybrids PIT register is monitonic decreasing. However, sched_clock
reading needs to be monitonic increasing. Use bitwise not to get
the complement of the clock register. This fixes the clock going
backward. Also, the clock now starts at 0 since we load the
register with the maximum value at start.
Signed-off-by: Stefan Agner <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/d25af915993aec1b486be653eb86f748ddef54fe.1394057313.git.stefan@agner.ch
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/clocksource/vf_pit_timer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clocksource/vf_pit_timer.c b/drivers/clocksource/vf_pit_timer.c
index 587e020..e559095 100644
--- a/drivers/clocksource/vf_pit_timer.c
+++ b/drivers/clocksource/vf_pit_timer.c
@@ -54,7 +54,7 @@ static inline void pit_irq_acknowledge(void)
static unsigned int pit_read_sched_clock(void)
{
- return __raw_readl(clksrc_base + PITCVAL);
+ return ~__raw_readl(clksrc_base + PITCVAL);
}
static int __init pit_clocksource_init(unsigned long rate)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Charles Keepax <[email protected]>
commit 749d32237bf39e6576dd95bfdf24e4378e51716c upstream.
The snd_compr_open function would always return 0 even if the compressed
ops open function failed, obviously this is incorrect. Looks like this
was introduced by a small typo in:
commit a0830dbd4e42b38aefdf3fb61ba5019a1a99ea85
ALSA: Add a reference counter to card instance
This patch returns the value from the compressed op as it should.
Signed-off-by: Charles Keepax <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/core/compress_offload.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index 1979993..3fdf998 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -133,7 +133,7 @@ static int snd_compr_open(struct inode *inode, struct file *f)
kfree(data);
}
snd_card_unref(compr->card);
- return 0;
+ return ret;
}
static int snd_compr_free(struct inode *inode, struct file *f)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe David Borba Manana <[email protected]>
commit a2aa75e18a21b21952dc6daa9bac7c9f4426f81f upstream.
When using a mix of compressed file extents and prealloc extents, it
is possible to fill a page of a file with random, garbage data from
some unrelated previous use of the page, instead of a sequence of zeroes.
A simple sequence of steps to get into such case, taken from the test
case I made for xfstests, is:
_scratch_mkfs
_scratch_mount "-o compress-force=lzo"
$XFS_IO_PROG -f -c "pwrite -S 0x06 -b 18670 266978 18670" $SCRATCH_MNT/foobar
$XFS_IO_PROG -c "falloc 26450 665194" $SCRATCH_MNT/foobar
$XFS_IO_PROG -c "truncate 542872" $SCRATCH_MNT/foobar
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar
This results in the following file items in the fs tree:
item 4 key (257 INODE_ITEM 0) itemoff 15879 itemsize 160
inode generation 6 transid 6 size 542872 block group 0 mode 100600
item 5 key (257 INODE_REF 256) itemoff 15863 itemsize 16
inode ref index 2 namelen 6 name: foobar
item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53
extent data disk byte 0 nr 0 gen 6
extent data offset 0 nr 24576 ram 266240
extent compression 0
item 7 key (257 EXTENT_DATA 24576) itemoff 15757 itemsize 53
prealloc data disk byte 12849152 nr 241664 gen 6
prealloc data offset 0 nr 241664
item 8 key (257 EXTENT_DATA 266240) itemoff 15704 itemsize 53
extent data disk byte 12845056 nr 4096 gen 6
extent data offset 0 nr 20480 ram 20480
extent compression 2
item 9 key (257 EXTENT_DATA 286720) itemoff 15651 itemsize 53
prealloc data disk byte 13090816 nr 405504 gen 6
prealloc data offset 0 nr 258048
The on disk extent at offset 266240 (which corresponds to 1 single disk block),
contains 5 compressed chunks of file data. Each of the first 4 compress 4096
bytes of file data, while the last one only compresses 3024 bytes of file data.
Therefore a read into the file region [285648 ; 286720[ (length = 4096 - 3024 =
1072 bytes) should always return zeroes (our next extent is a prealloc one).
The solution here is the compression code path to zero the remaining (untouched)
bytes of the last page it uncompressed data into, as the information about how
much space the file data consumes in the last page is not known in the upper layer
fs/btrfs/extent_io.c:__do_readpage(). In __do_readpage we were correctly zeroing
the remainder of the page but only if it corresponds to the last page of the inode
and if the inode's size is not a multiple of the page size.
This would cause not only returning random data on reads, but also permanently
storing random data when updating parts of the region that should be zeroed.
For the example above, it means updating a single byte in the region [285648 ; 286720[
would store that byte correctly but also store random data on disk.
A test case for xfstests follows soon.
Signed-off-by: Filipe David Borba Manana <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/btrfs/compression.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index b189bd1..ce70678 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -1009,6 +1009,8 @@ int btrfs_decompress_buf2page(char *buf, unsigned long buf_start,
bytes = min(bytes, working_bytes);
kaddr = kmap_atomic(page_out);
memcpy(kaddr + *pg_offset, buf + buf_offset, bytes);
+ if (*pg_index == (vcnt - 1) && *pg_offset == 0)
+ memset(kaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
kunmap_atomic(kaddr);
flush_dcache_page(page_out);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleg Drokin <[email protected]>
commit d22e6338db7f613dd4f6095c190682fcc519e4b7 upstream.
Recent changes to retry on ESTALE in linkat
(commit 442e31ca5a49e398351b2954b51f578353fdf210)
introduced a mountpoint reference leak and a small memory
leak in case a filesystem link operation returns ESTALE
which is pretty normal for distributed filesystems like
lustre, nfs and so on.
Free old_path in such a case.
[AV: there was another missing path_put() nearby - on the previous
goto retry]
Signed-off-by: Oleg Drokin: <[email protected]>
Signed-off-by: Al Viro <[email protected]>
[ luis: backported to 3.11:
- dropped AV changes as they are not applicable to 3.11 kernel ]
Signed-off-by: Luis Henriques <[email protected]>
---
fs/namei.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/namei.c b/fs/namei.c
index df9946e..b8f1f7f 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -3708,6 +3708,7 @@ retry:
out_dput:
done_path_create(&new_path, new_dentry);
if (retry_estale(error, how)) {
+ path_put(&old_path);
how |= LOOKUP_REVAL;
goto retry;
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit b6b87a1df604678ed1be40158080db012a99ccca upstream.
This patch fixes the incorrect setting of ->post_send_buf_count
related to RDMA WRITEs + READs where isert_rdma_rw->send_wr_num
was not being taken into account.
This includes incrementing ->post_send_buf_count within
isert_put_datain() + isert_get_dataout(), decrementing within
__isert_send_completion() + isert_response_completion(), and
clearing wr->send_wr_num within isert_completion_rdma_read()
This is necessary because even though IB_SEND_SIGNALED is
not set for RDMA WRITEs + READs, during a QP failure event
the work requests will be returned with exception status
from the TX completion queue.
Acked-by: Sagi Grimberg <[email protected]>
Cc: Or Gerlitz <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/infiniband/ulp/isert/ib_isert.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
index 57a01df..5430b4a 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -1374,6 +1374,7 @@ isert_completion_rdma_read(struct iser_tx_desc *tx_desc,
}
cmd->write_data_done = se_cmd->data_length;
+ wr->send_wr_num = 0;
pr_debug("isert_do_rdma_read_comp, calling target_execute_cmd\n");
spin_lock_bh(&cmd->istate_lock);
@@ -1438,6 +1439,7 @@ isert_response_completion(struct iser_tx_desc *tx_desc,
struct ib_device *ib_dev)
{
struct iscsi_cmd *cmd = &isert_cmd->iscsi_cmd;
+ struct isert_rdma_wr *wr = &isert_cmd->rdma_wr;
if (cmd->i_state == ISTATE_SEND_TASKMGTRSP ||
cmd->i_state == ISTATE_SEND_LOGOUTRSP ||
@@ -1449,7 +1451,7 @@ isert_response_completion(struct iser_tx_desc *tx_desc,
queue_work(isert_comp_wq, &isert_cmd->comp_work);
return;
}
- atomic_dec(&isert_conn->post_send_buf_count);
+ atomic_sub(wr->send_wr_num + 1, &isert_conn->post_send_buf_count);
cmd->i_state = ISTATE_SENT_STATUS;
isert_completion_put(tx_desc, isert_cmd, ib_dev);
@@ -1487,7 +1489,7 @@ isert_send_completion(struct iser_tx_desc *tx_desc,
case ISER_IB_RDMA_READ:
pr_debug("isert_send_completion: Got ISER_IB_RDMA_READ:\n");
- atomic_dec(&isert_conn->post_send_buf_count);
+ atomic_sub(wr->send_wr_num, &isert_conn->post_send_buf_count);
isert_completion_rdma_read(tx_desc, isert_cmd);
break;
default:
@@ -1951,12 +1953,12 @@ isert_put_datain(struct iscsi_conn *conn, struct iscsi_cmd *cmd)
isert_init_tx_hdrs(isert_conn, &isert_cmd->tx_desc);
isert_init_send_wr(isert_cmd, &isert_cmd->tx_desc.send_wr);
- atomic_inc(&isert_conn->post_send_buf_count);
+ atomic_add(wr->send_wr_num + 1, &isert_conn->post_send_buf_count);
rc = ib_post_send(isert_conn->conn_qp, wr->send_wr, &wr_failed);
if (rc) {
pr_warn("ib_post_send() failed for IB_WR_RDMA_WRITE\n");
- atomic_dec(&isert_conn->post_send_buf_count);
+ atomic_sub(wr->send_wr_num + 1, &isert_conn->post_send_buf_count);
}
pr_debug("Posted RDMA_WRITE + Response for iSER Data READ\n");
return 1;
@@ -2059,12 +2061,12 @@ isert_get_dataout(struct iscsi_conn *conn, struct iscsi_cmd *cmd, bool recovery)
data_left -= data_len;
}
- atomic_inc(&isert_conn->post_send_buf_count);
+ atomic_add(wr->send_wr_num, &isert_conn->post_send_buf_count);
rc = ib_post_send(isert_conn->conn_qp, wr->send_wr, &wr_failed);
if (rc) {
pr_warn("ib_post_send() failed for IB_WR_RDMA_READ\n");
- atomic_dec(&isert_conn->post_send_buf_count);
+ atomic_sub(wr->send_wr_num, &isert_conn->post_send_buf_count);
}
pr_debug("Posted RDMA_READ memory for ISER Data WRITE\n");
return 0;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Suresh Siddha <[email protected]>
commit 731bd6a93a6e9172094a2322bd0ee964bb1f4d63 upstream.
For non-eager fpu mode, thread's fpu state is allocated during the first
fpu usage (in the context of device not available exception). This
(math_state_restore()) can be a blocking call and hence we enable
interrupts (which were originally disabled when the exception happened),
allocate memory and disable interrupts etc.
But the eager-fpu mode, call's the same math_state_restore() from
kernel_fpu_end(). The assumption being that tsk_used_math() is always
set for the eager-fpu mode and thus avoid the code path of enabling
interrupts, allocating fpu state using blocking call and disable
interrupts etc.
But the below issue was noticed by Maarten Baert, Nate Eldredge and
few others:
If a user process dumps core on an ecrypt fs while aesni-intel is loaded,
we get a BUG() in __find_get_block() complaining that it was called with
interrupts disabled; then all further accesses to our ecrypt fs hang
and we have to reboot.
The aesni-intel code (encrypting the core file that we are writing) needs
the FPU and quite properly wraps its code in kernel_fpu_{begin,end}(),
the latter of which calls math_state_restore(). So after kernel_fpu_end(),
interrupts may be disabled, which nobody seems to expect, and they stay
that way until we eventually get to __find_get_block() which barfs.
For eager fpu, most the time, tsk_used_math() is true. At few instances
during thread exit, signal return handling etc, tsk_used_math() might
be false.
In kernel_fpu_end(), for eager-fpu, call math_state_restore()
only if tsk_used_math() is set. Otherwise, don't bother. Kernel code
path which cleared tsk_used_math() knows what needs to be done
with the fpu state.
Reported-by: Maarten Baert <[email protected]>
Reported-by: Nate Eldredge <[email protected]>
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Suresh Siddha <[email protected]>
Link: http://lkml.kernel.org/r/1391410583.3801.6.camel@europa
Cc: George Spelvin <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/kernel/i387.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index 5d576ab..21935af 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -86,10 +86,19 @@ EXPORT_SYMBOL(__kernel_fpu_begin);
void __kernel_fpu_end(void)
{
- if (use_eager_fpu())
- math_state_restore();
- else
+ if (use_eager_fpu()) {
+ /*
+ * For eager fpu, most the time, tsk_used_math() is true.
+ * Restore the user math as we are done with the kernel usage.
+ * At few instances during thread exit, signal handling etc,
+ * tsk_used_math() is false. Those few places will take proper
+ * actions, so we don't need to restore the math here.
+ */
+ if (likely(tsk_used_math(current)))
+ math_state_restore();
+ } else {
stts();
+ }
}
EXPORT_SYMBOL(__kernel_fpu_end);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Magnus Damm <[email protected]>
commit 6d7d5da7d75c6df676c8b72d32b02ff024438f0c upstream.
Use CONFIG_ARCH_PHYS_ADDR_T_64BIT to determine
if ignoring or truncating of memory banks is
neccessary. This may be needed in the case of
64-bit memory bank addresses but when phys_addr_t
is kept 32-bit.
Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Russell King <[email protected]>
Cc: Wang Nan <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/kernel/setup.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index afc2489..f58f646 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -622,6 +622,7 @@ void __init dump_machine_table(void)
int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
{
struct membank *bank = &meminfo.bank[meminfo.nr_banks];
+ u64 aligned_start;
if (meminfo.nr_banks >= NR_BANKS) {
printk(KERN_CRIT "NR_BANKS too low, "
@@ -634,10 +635,16 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
* Size is appropriately rounded down, start is rounded up.
*/
size -= start & ~PAGE_MASK;
- bank->start = PAGE_ALIGN(start);
+ aligned_start = PAGE_ALIGN(start);
-#ifndef CONFIG_ARM_LPAE
- if (bank->start + size < bank->start) {
+#ifndef CONFIG_ARCH_PHYS_ADDR_T_64BIT
+ if (aligned_start > ULONG_MAX) {
+ printk(KERN_CRIT "Ignoring memory at 0x%08llx outside "
+ "32-bit physical address space\n", (long long)start);
+ return -EINVAL;
+ }
+
+ if (aligned_start + size > ULONG_MAX) {
printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
"32-bit physical address space\n", (long long)start);
/*
@@ -645,10 +652,11 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
* 32 bits, we use ULONG_MAX as the upper limit rather than 4GB.
* This means we lose a page after masking.
*/
- size = ULONG_MAX - bank->start;
+ size = ULONG_MAX - aligned_start;
}
#endif
+ bank->start = aligned_start;
bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1);
/*
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Brandenburger <[email protected]>
commit 4fb1a86fb5e4209a7d4426d4e586c58e9edc74ac upstream.
Sometimes the cleanup after memcg hierarchy testing gets stuck in
mem_cgroup_reparent_charges(), unable to bring non-kmem usage down to 0.
There may turn out to be several causes, but a major cause is this: the
workitem to offline parent can get run before workitem to offline child;
parent's mem_cgroup_reparent_charges() circles around waiting for the
child's pages to be reparented to its lrus, but it's holding
cgroup_mutex which prevents the child from reaching its
mem_cgroup_reparent_charges().
Further testing showed that an ordered workqueue for cgroup_destroy_wq
is not always good enough: percpu_ref_kill_and_confirm's call_rcu_sched
stage on the way can mess up the order before reaching the workqueue.
Instead, when offlining a memcg, call mem_cgroup_reparent_charges() on
all its children (and grandchildren, in the correct order) to have their
charges reparented first.
Fixes: e5fca243abae ("cgroup: use a dedicated workqueue for cgroup destruction")
Signed-off-by: Filipe Brandenburger <[email protected]>
Signed-off-by: Hugh Dickins <[email protected]>
Reviewed-by: Tejun Heo <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Johannes Weiner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
[ Hugh:
Yes, more differences, and the old mem_cgroup_reparent_charges line
is intentionally left in for 3.10 whereas it was removed for 3.12+:
that's because the css/cgroup iterator changed in between, it used
not to supply the root of the subtree, but nowadays it does. ]
[ luis: backported to 3.11: used Hugh's backport to 3.10 ]
Signed-off-by: Luis Henriques <[email protected]>
---
mm/memcontrol.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index bb13089..4e4b328 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -6346,11 +6346,25 @@ static void mem_cgroup_invalidate_reclaim_iterators(struct mem_cgroup *memcg)
static void mem_cgroup_css_offline(struct cgroup *cont)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
+ struct cgroup *iter;
kmem_cgroup_css_offline(memcg);
mem_cgroup_invalidate_reclaim_iterators(memcg);
+
+ /*
+ * This requires that offlining is serialized. Right now that is
+ * guaranteed because css_killed_work_fn() holds the cgroup_mutex.
+ */
+ rcu_read_lock();
+ cgroup_for_each_descendant_post(iter, cont) {
+ rcu_read_unlock();
+ mem_cgroup_reparent_charges(mem_cgroup_from_cont(iter));
+ rcu_read_lock();
+ }
+ rcu_read_unlock();
mem_cgroup_reparent_charges(memcg);
+
mem_cgroup_destroy_all_caches(memcg);
vmpressure_cleanup(&memcg->vmpressure);
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang Rui <[email protected]>
commit 89935315f192abf7068d0044cefc84f162c3c81f upstream.
Before commit b355cee88e3b (ACPI / resources: ignore invalid ACPI
device resources), if acpi_dev_resource_memory()/acpi_dev_resource_io()
returns false, it means the the resource is not a memeory/IO resource.
But after commit b355cee88e3b, those functions return false if the
given memory/IO resource entry is invalid (the length of the resource
is zero).
This breaks pnpacpi_allocated_resource(), because it now recognizes
the invalid memory/io resources as resources of unknown type. Thus
users see confusing warning messages on machines with zero length
ACPI memory/IO resources.
Fix the problem by rearranging pnpacpi_allocated_resource() so that
it calls acpi_dev_resource_memory() for memory type and IO type
resources only, respectively.
Fixes: b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources)
Signed-off-by: Zhang Rui <[email protected]>
Reported-and-tested-by: Markus Trippelsdorf <[email protected]>
Reported-and-tested-by: Julian Wollrath <[email protected]>
Reported-and-tested-by: Paul Bolle <[email protected]>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/pnp/pnpacpi/rsparser.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 167f3d0..66977eb 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -183,9 +183,7 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
struct resource r = {0};
int i, flags;
- if (acpi_dev_resource_memory(res, &r)
- || acpi_dev_resource_io(res, &r)
- || acpi_dev_resource_address_space(res, &r)
+ if (acpi_dev_resource_address_space(res, &r)
|| acpi_dev_resource_ext_address_space(res, &r)) {
pnp_add_resource(dev, &r);
return AE_OK;
@@ -217,6 +215,17 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
}
switch (res->type) {
+ case ACPI_RESOURCE_TYPE_MEMORY24:
+ case ACPI_RESOURCE_TYPE_MEMORY32:
+ case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
+ if (acpi_dev_resource_memory(res, &r))
+ pnp_add_resource(dev, &r);
+ break;
+ case ACPI_RESOURCE_TYPE_IO:
+ case ACPI_RESOURCE_TYPE_FIXED_IO:
+ if (acpi_dev_resource_io(res, &r))
+ pnp_add_resource(dev, &r);
+ break;
case ACPI_RESOURCE_TYPE_DMA:
dma = &res->data.dma;
if (dma->channel_count > 0 && dma->channels[0] != (u8) -1)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit defd884845297fd5690594bfe89656b01f16d87e upstream.
This patch addresses a couple of different hug shutdown issues
related to wait_event() + isert_conn->state. First, it changes
isert_conn->conn_wait + isert_conn->conn_wait_comp_err from
waitqueues to completions, and sets ISER_CONN_TERMINATING from
within isert_disconnect_work().
Second, it splits isert_free_conn() into isert_wait_conn() that
is called earlier in iscsit_close_connection() to ensure that
all outstanding commands have completed before continuing.
Finally, it breaks isert_cq_comp_err() into seperate TX / RX
related code, and adds logic in isert_cq_rx_comp_err() to wait
for outstanding commands to complete before setting ISER_CONN_DOWN
and calling complete(&isert_conn->conn_wait_comp_err).
Acked-by: Sagi Grimberg <[email protected]>
Cc: Or Gerlitz <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
[ luis: backported to 3.11: used Nicholas's backport for 3.10 ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/infiniband/ulp/isert/ib_isert.c | 105 ++++++++++++++------------------
drivers/infiniband/ulp/isert/ib_isert.h | 4 +-
drivers/target/iscsi/iscsi_target.c | 4 ++
include/target/iscsi/iscsi_transport.h | 1 +
4 files changed, 54 insertions(+), 60 deletions(-)
diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
index 58968e7..57a01df 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -392,8 +392,8 @@ isert_connect_request(struct rdma_cm_id *cma_id, struct rdma_cm_event *event)
isert_conn->state = ISER_CONN_INIT;
INIT_LIST_HEAD(&isert_conn->conn_accept_node);
init_completion(&isert_conn->conn_login_comp);
- init_waitqueue_head(&isert_conn->conn_wait);
- init_waitqueue_head(&isert_conn->conn_wait_comp_err);
+ init_completion(&isert_conn->conn_wait);
+ init_completion(&isert_conn->conn_wait_comp_err);
kref_init(&isert_conn->conn_kref);
kref_get(&isert_conn->conn_kref);
mutex_init(&isert_conn->conn_mutex);
@@ -550,11 +550,11 @@ isert_disconnect_work(struct work_struct *work)
pr_debug("isert_disconnect_work(): >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>\n");
mutex_lock(&isert_conn->conn_mutex);
- isert_conn->state = ISER_CONN_DOWN;
+ if (isert_conn->state == ISER_CONN_UP)
+ isert_conn->state = ISER_CONN_TERMINATING;
if (isert_conn->post_recv_buf_count == 0 &&
atomic_read(&isert_conn->post_send_buf_count) == 0) {
- pr_debug("Calling wake_up(&isert_conn->conn_wait);\n");
mutex_unlock(&isert_conn->conn_mutex);
goto wake_up;
}
@@ -574,7 +574,7 @@ isert_disconnect_work(struct work_struct *work)
mutex_unlock(&isert_conn->conn_mutex);
wake_up:
- wake_up(&isert_conn->conn_wait);
+ complete(&isert_conn->conn_wait);
isert_put_conn(isert_conn);
}
@@ -1414,7 +1414,7 @@ isert_do_control_comp(struct work_struct *work)
pr_debug("Calling iscsit_logout_post_handler >>>>>>>>>>>>>>\n");
/*
* Call atomic_dec(&isert_conn->post_send_buf_count)
- * from isert_free_conn()
+ * from isert_wait_conn()
*/
isert_conn->logout_posted = true;
iscsit_logout_post_handler(cmd, cmd->conn);
@@ -1498,31 +1498,38 @@ isert_send_completion(struct iser_tx_desc *tx_desc,
}
static void
-isert_cq_comp_err(struct iser_tx_desc *tx_desc, struct isert_conn *isert_conn)
+isert_cq_tx_comp_err(struct iser_tx_desc *tx_desc, struct isert_conn *isert_conn)
{
struct ib_device *ib_dev = isert_conn->conn_cm_id->device;
+ struct isert_cmd *isert_cmd = tx_desc->isert_cmd;
- if (tx_desc) {
- struct isert_cmd *isert_cmd = tx_desc->isert_cmd;
+ if (!isert_cmd)
+ isert_unmap_tx_desc(tx_desc, ib_dev);
+ else
+ isert_completion_put(tx_desc, isert_cmd, ib_dev);
+}
- if (!isert_cmd)
- isert_unmap_tx_desc(tx_desc, ib_dev);
- else
- isert_completion_put(tx_desc, isert_cmd, ib_dev);
+static void
+isert_cq_rx_comp_err(struct isert_conn *isert_conn)
+{
+ struct iscsi_conn *conn = isert_conn->conn;
+
+ if (isert_conn->post_recv_buf_count)
+ return;
+
+ if (conn->sess) {
+ target_sess_cmd_list_set_waiting(conn->sess->se_sess);
+ target_wait_for_sess_cmds(conn->sess->se_sess);
}
- if (isert_conn->post_recv_buf_count == 0 &&
- atomic_read(&isert_conn->post_send_buf_count) == 0) {
- pr_debug("isert_cq_comp_err >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>\n");
- pr_debug("Calling wake_up from isert_cq_comp_err\n");
+ while (atomic_read(&isert_conn->post_send_buf_count))
+ msleep(3000);
- mutex_lock(&isert_conn->conn_mutex);
- if (isert_conn->state != ISER_CONN_DOWN)
- isert_conn->state = ISER_CONN_TERMINATING;
- mutex_unlock(&isert_conn->conn_mutex);
+ mutex_lock(&isert_conn->conn_mutex);
+ isert_conn->state = ISER_CONN_DOWN;
+ mutex_unlock(&isert_conn->conn_mutex);
- wake_up(&isert_conn->conn_wait_comp_err);
- }
+ complete(&isert_conn->conn_wait_comp_err);
}
static void
@@ -1547,8 +1554,9 @@ isert_cq_tx_work(struct work_struct *work)
pr_debug("TX wc.status != IB_WC_SUCCESS >>>>>>>>>>>>>>\n");
pr_debug("TX wc.status: 0x%08x\n", wc.status);
pr_debug("TX wc.vendor_err: 0x%08x\n", wc.vendor_err);
+
atomic_dec(&isert_conn->post_send_buf_count);
- isert_cq_comp_err(tx_desc, isert_conn);
+ isert_cq_tx_comp_err(tx_desc, isert_conn);
}
}
@@ -1592,7 +1600,7 @@ isert_cq_rx_work(struct work_struct *work)
wc.vendor_err);
}
isert_conn->post_recv_buf_count--;
- isert_cq_comp_err(NULL, isert_conn);
+ isert_cq_rx_comp_err(isert_conn);
}
}
@@ -2337,22 +2345,11 @@ isert_free_np(struct iscsi_np *np)
kfree(isert_np);
}
-static int isert_check_state(struct isert_conn *isert_conn, int state)
-{
- int ret;
-
- mutex_lock(&isert_conn->conn_mutex);
- ret = (isert_conn->state == state);
- mutex_unlock(&isert_conn->conn_mutex);
-
- return ret;
-}
-
-static void isert_free_conn(struct iscsi_conn *conn)
+static void isert_wait_conn(struct iscsi_conn *conn)
{
struct isert_conn *isert_conn = conn->context;
- pr_debug("isert_free_conn: Starting \n");
+ pr_debug("isert_wait_conn: Starting \n");
/*
* Decrement post_send_buf_count for special case when called
* from isert_do_control_comp() -> iscsit_logout_post_handler()
@@ -2362,38 +2359,29 @@ static void isert_free_conn(struct iscsi_conn *conn)
atomic_dec(&isert_conn->post_send_buf_count);
if (isert_conn->conn_cm_id && isert_conn->state != ISER_CONN_DOWN) {
- pr_debug("Calling rdma_disconnect from isert_free_conn\n");
+ pr_debug("Calling rdma_disconnect from isert_wait_conn\n");
rdma_disconnect(isert_conn->conn_cm_id);
}
/*
* Only wait for conn_wait_comp_err if the isert_conn made it
* into full feature phase..
*/
- if (isert_conn->state == ISER_CONN_UP) {
- pr_debug("isert_free_conn: Before wait_event comp_err %d\n",
- isert_conn->state);
- mutex_unlock(&isert_conn->conn_mutex);
-
- wait_event(isert_conn->conn_wait_comp_err,
- (isert_check_state(isert_conn, ISER_CONN_TERMINATING)));
-
- wait_event(isert_conn->conn_wait,
- (isert_check_state(isert_conn, ISER_CONN_DOWN)));
-
- isert_put_conn(isert_conn);
- return;
- }
if (isert_conn->state == ISER_CONN_INIT) {
mutex_unlock(&isert_conn->conn_mutex);
- isert_put_conn(isert_conn);
return;
}
- pr_debug("isert_free_conn: wait_event conn_wait %d\n",
- isert_conn->state);
+ if (isert_conn->state == ISER_CONN_UP)
+ isert_conn->state = ISER_CONN_TERMINATING;
mutex_unlock(&isert_conn->conn_mutex);
- wait_event(isert_conn->conn_wait,
- (isert_check_state(isert_conn, ISER_CONN_DOWN)));
+ wait_for_completion(&isert_conn->conn_wait_comp_err);
+
+ wait_for_completion(&isert_conn->conn_wait);
+}
+
+static void isert_free_conn(struct iscsi_conn *conn)
+{
+ struct isert_conn *isert_conn = conn->context;
isert_put_conn(isert_conn);
}
@@ -2405,6 +2393,7 @@ static struct iscsit_transport iser_target_transport = {
.iscsit_setup_np = isert_setup_np,
.iscsit_accept_np = isert_accept_np,
.iscsit_free_np = isert_free_np,
+ .iscsit_wait_conn = isert_wait_conn,
.iscsit_free_conn = isert_free_conn,
.iscsit_alloc_cmd = isert_alloc_cmd,
.iscsit_get_login_rx = isert_get_login_rx,
diff --git a/drivers/infiniband/ulp/isert/ib_isert.h b/drivers/infiniband/ulp/isert/ib_isert.h
index 191117b..eaf7682 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.h
+++ b/drivers/infiniband/ulp/isert/ib_isert.h
@@ -103,8 +103,8 @@ struct isert_conn {
struct isert_device *conn_device;
struct work_struct conn_logout_work;
struct mutex conn_mutex;
- wait_queue_head_t conn_wait;
- wait_queue_head_t conn_wait_comp_err;
+ struct completion conn_wait;
+ struct completion conn_wait_comp_err;
struct kref conn_kref;
};
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 832e08f..17229ff 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -4208,6 +4208,10 @@ int iscsit_close_connection(
iscsit_stop_timers_for_cmds(conn);
iscsit_stop_nopin_response_timer(conn);
iscsit_stop_nopin_timer(conn);
+
+ if (conn->conn_transport->iscsit_wait_conn)
+ conn->conn_transport->iscsit_wait_conn(conn);
+
iscsit_free_queue_reqs_for_conn(conn);
/*
diff --git a/include/target/iscsi/iscsi_transport.h b/include/target/iscsi/iscsi_transport.h
index e5d09d2..4bde613 100644
--- a/include/target/iscsi/iscsi_transport.h
+++ b/include/target/iscsi/iscsi_transport.h
@@ -11,6 +11,7 @@ struct iscsit_transport {
int (*iscsit_setup_np)(struct iscsi_np *, struct __kernel_sockaddr_storage *);
int (*iscsit_accept_np)(struct iscsi_np *, struct iscsi_conn *);
void (*iscsit_free_np)(struct iscsi_np *);
+ void (*iscsit_wait_conn)(struct iscsi_conn *);
void (*iscsit_free_conn)(struct iscsi_conn *);
struct iscsi_cmd *(*iscsit_alloc_cmd)(struct iscsi_conn *, gfp_t);
int (*iscsit_get_login_rx)(struct iscsi_conn *, struct iscsi_login *);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel J Blueman <[email protected]>
commit 847d7970defb45540735b3fb4e88471c27cacd85 upstream.
For systems with multiple servers and routed fabric, all
northbridges get assigned to the first server. Fix this by also
using the node reported from the PCI bus. For single-fabric
systems, the northbriges are on PCI bus 0 by definition, which
are on NUMA node 0 by definition, so this is invarient on most
systems.
Tested on fam10h and fam15h single and multi-fabric systems and
candidate for stable.
Signed-off-by: Daniel J Blueman <[email protected]>
Acked-by: Steffen Persvold <[email protected]>
Acked-by: Borislav Petkov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/kernel/quirks.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 04ee1e2..52dbf1e 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -529,7 +529,7 @@ static void quirk_amd_nb_node(struct pci_dev *dev)
return;
pci_read_config_dword(nb_ht, 0x60, &val);
- node = val & 7;
+ node = pcibus_to_node(dev->bus) | (val & 7);
/*
* Some hardware may return an invalid node ID,
* so check it first:
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Russell King <[email protected]>
commit 571b14375019c3a66ef70d4d4a7083f4238aca30 upstream.
If the kernel is loaded higher in physical memory than normal, and we
calculate PHYS_OFFSET higher than the start of RAM, this leads to
boot problems as we attempt to map part of this RAM into userspace.
Rather than struggle with this, just truncate the mapping.
Signed-off-by: Russell King <[email protected]>
Cc: Wang Nan <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/kernel/setup.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index f58f646..37ea994 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -656,6 +656,20 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
}
#endif
+ if (aligned_start < PHYS_OFFSET) {
+ if (aligned_start + size <= PHYS_OFFSET) {
+ pr_info("Ignoring memory below PHYS_OFFSET: 0x%08llx-0x%08llx\n",
+ aligned_start, aligned_start + size);
+ return -EINVAL;
+ }
+
+ pr_info("Ignoring memory below PHYS_OFFSET: 0x%08llx-0x%08llx\n",
+ aligned_start, (u64)PHYS_OFFSET);
+
+ size -= PHYS_OFFSET - aligned_start;
+ aligned_start = PHYS_OFFSET;
+ }
+
bank->start = aligned_start;
bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Qais Yousef <[email protected]>
commit 87c99203fea897fbdd84b681ad9fced2517dcf98 upstream.
The file uses u16 type but doesn't include its definition explicitly
I was getting this error when including this header in my driver:
arch/mips/include/asm/mipsregs.h:644:33: error: unknown type name ‘u16’
Signed-off-by: Qais Yousef <[email protected]>
Reviewed-by: Steven J. Hill <[email protected]>
Acked-by: David Daney <[email protected]>
Signed-off-by: John Crispin <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/6212/
Signed-off-by: Luis Henriques <[email protected]>
---
arch/mips/include/asm/mipsregs.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index fed1c3e..b3b61fb 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -14,6 +14,7 @@
#define _ASM_MIPSREGS_H
#include <linux/linkage.h>
+#include <linux/types.h>
#include <asm/hazards.h>
#include <asm/war.h>
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Rafael J. Wysocki" <[email protected]>
commit a4e90bed511220ff601d064c9e5d583e91308f65 upstream.
If the HW Reduced ACPI mode bit is set in the FADT, ACPICA uses
the optional sleep control and sleep status registers for making
the system enter sleep states (including S5), so it is not possible
to use system sleep states or power it off using ACPI if the HW
Reduced ACPI mode bit is set and those registers are not available.
For this reason, add a new function, acpi_sleep_state_supported(),
checking if the HW Reduced ACPI mode bit is set and whether or not
system sleep states are usable in that case in addition to checking
the return value of acpi_get_sleep_type_data() and make the ACPI
sleep setup routines use that function to check the availability of
system sleep states.
Among other things, this prevents the kernel from attempting to
use ACPI for powering off HW Reduced ACPI systems without the sleep
control and sleep status registers, because ACPI power off doesn't
have a chance to work on them. That allows alternative power off
mechanisms that may actually work to be used on those systems. The
affected machines include Dell Venue 8 Pro, Asus T100TA, Haswell
Desktop SDP and Ivy Bridge EP Demo depot.
References: https://bugzilla.kernel.org/show_bug.cgi?id=70931
Reported-by: Adam Williamson <[email protected]>
Tested-by: Aubrey Li <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/acpi/sleep.c | 32 +++++++++++++++-----------------
1 file changed, 15 insertions(+), 17 deletions(-)
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 187ab61..025effa 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -78,6 +78,17 @@ static int acpi_sleep_prepare(u32 acpi_state)
return 0;
}
+static bool acpi_sleep_state_supported(u8 sleep_state)
+{
+ acpi_status status;
+ u8 type_a, type_b;
+
+ status = acpi_get_sleep_type_data(sleep_state, &type_a, &type_b);
+ return ACPI_SUCCESS(status) && (!acpi_gbl_reduced_hardware
+ || (acpi_gbl_FADT.sleep_control.address
+ && acpi_gbl_FADT.sleep_status.address));
+}
+
#ifdef CONFIG_ACPI_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
@@ -602,15 +613,9 @@ static void acpi_sleep_suspend_setup(void)
{
int i;
- for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
- acpi_status status;
- u8 type_a, type_b;
-
- status = acpi_get_sleep_type_data(i, &type_a, &type_b);
- if (ACPI_SUCCESS(status)) {
+ for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++)
+ if (acpi_sleep_state_supported(i))
sleep_states[i] = 1;
- }
- }
suspend_set_ops(old_suspend_ordering ?
&acpi_suspend_ops_old : &acpi_suspend_ops);
@@ -741,11 +746,7 @@ static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
static void acpi_sleep_hibernate_setup(void)
{
- acpi_status status;
- u8 type_a, type_b;
-
- status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
- if (ACPI_FAILURE(status))
+ if (!acpi_sleep_state_supported(ACPI_STATE_S4))
return;
hibernation_set_ops(old_suspend_ordering ?
@@ -794,8 +795,6 @@ static void acpi_power_off(void)
int __init acpi_sleep_init(void)
{
- acpi_status status;
- u8 type_a, type_b;
char supported[ACPI_S_STATE_COUNT * 3 + 1];
char *pos = supported;
int i;
@@ -810,8 +809,7 @@ int __init acpi_sleep_init(void)
acpi_sleep_suspend_setup();
acpi_sleep_hibernate_setup();
- status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
- if (ACPI_SUCCESS(status)) {
+ if (acpi_sleep_state_supported(ACPI_STATE_S5)) {
sleep_states[ACPI_STATE_S5] = 1;
pm_power_off_prepare = acpi_power_off_prepare;
pm_power_off = acpi_power_off;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Emmanuel Grumbach <[email protected]>
commit 205e2210daa975d92ace485a65a31ccc4077fe1a upstream.
NICs supported by iwldvm don't handle well TX AMPDU.
Disable it by default, still leave the possibility to
the user to force enable it with a debug parameter.
NICs supported by iwlmvm don't suffer from the same issue,
leave TX AMPDU enabled by default for these.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/iwlwifi/dvm/mac80211.c | 22 ++++++++++++++++++++--
drivers/net/wireless/iwlwifi/iwl-drv.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-modparams.h | 11 +++++++----
drivers/net/wireless/iwlwifi/mvm/mac80211.c | 22 ++++++++++++++++++++--
4 files changed, 48 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
index 3193872..63c67bb 100644
--- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
@@ -748,6 +748,24 @@ static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
return ret;
}
+static inline bool iwl_enable_rx_ampdu(const struct iwl_cfg *cfg)
+{
+ if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG)
+ return false;
+ return true;
+}
+
+static inline bool iwl_enable_tx_ampdu(const struct iwl_cfg *cfg)
+{
+ if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG)
+ return false;
+ if (iwlwifi_mod_params.disable_11n & IWL_ENABLE_HT_TXAGG)
+ return true;
+
+ /* disabled by default */
+ return false;
+}
+
static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
@@ -769,7 +787,7 @@ static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
switch (action) {
case IEEE80211_AMPDU_RX_START:
- if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG)
+ if (!iwl_enable_rx_ampdu(priv->cfg))
break;
IWL_DEBUG_HT(priv, "start Rx\n");
ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn);
@@ -781,7 +799,7 @@ static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
case IEEE80211_AMPDU_TX_START:
if (!priv->trans->ops->txq_enable)
break;
- if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG)
+ if (!iwl_enable_tx_ampdu(priv->cfg))
break;
IWL_DEBUG_HT(priv, "start Tx\n");
ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn);
diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c
index d0162d4..b2a7552 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.c
@@ -1208,7 +1208,7 @@ module_param_named(swcrypto, iwlwifi_mod_params.sw_crypto, int, S_IRUGO);
MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
module_param_named(11n_disable, iwlwifi_mod_params.disable_11n, uint, S_IRUGO);
MODULE_PARM_DESC(11n_disable,
- "disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX");
+ "disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX");
module_param_named(amsdu_size_8K, iwlwifi_mod_params.amsdu_size_8K,
int, S_IRUGO);
MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0)");
diff --git a/drivers/net/wireless/iwlwifi/iwl-modparams.h b/drivers/net/wireless/iwlwifi/iwl-modparams.h
index a1f580c..4c6cff4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-modparams.h
+++ b/drivers/net/wireless/iwlwifi/iwl-modparams.h
@@ -79,9 +79,12 @@ enum iwl_power_level {
IWL_POWER_NUM
};
-#define IWL_DISABLE_HT_ALL BIT(0)
-#define IWL_DISABLE_HT_TXAGG BIT(1)
-#define IWL_DISABLE_HT_RXAGG BIT(2)
+enum iwl_disable_11n {
+ IWL_DISABLE_HT_ALL = BIT(0),
+ IWL_DISABLE_HT_TXAGG = BIT(1),
+ IWL_DISABLE_HT_RXAGG = BIT(2),
+ IWL_ENABLE_HT_TXAGG = BIT(3),
+};
/**
* struct iwl_mod_params
@@ -90,7 +93,7 @@ enum iwl_power_level {
*
* @sw_crypto: using hardware encryption, default = 0
* @disable_11n: disable 11n capabilities, default = 0,
- * use IWL_DISABLE_HT_* constants
+ * use IWL_[DIS,EN]ABLE_HT_* constants
* @amsdu_size_8K: enable 8K amsdu size, default = 0
* @restart_fw: restart firmware, default = 1
* @wd_disable: enable stuck queue check, default = 0
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index f19baf0..ae9a593 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -292,6 +292,24 @@ static void iwl_mvm_mac_tx(struct ieee80211_hw *hw,
ieee80211_free_txskb(hw, skb);
}
+static inline bool iwl_enable_rx_ampdu(const struct iwl_cfg *cfg)
+{
+ if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG)
+ return false;
+ return true;
+}
+
+static inline bool iwl_enable_tx_ampdu(const struct iwl_cfg *cfg)
+{
+ if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG)
+ return false;
+ if (iwlwifi_mod_params.disable_11n & IWL_ENABLE_HT_TXAGG)
+ return true;
+
+ /* enabled by default */
+ return true;
+}
+
static int iwl_mvm_mac_ampdu_action(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
@@ -311,7 +329,7 @@ static int iwl_mvm_mac_ampdu_action(struct ieee80211_hw *hw,
switch (action) {
case IEEE80211_AMPDU_RX_START:
- if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG) {
+ if (!iwl_enable_rx_ampdu(mvm->cfg)) {
ret = -EINVAL;
break;
}
@@ -321,7 +339,7 @@ static int iwl_mvm_mac_ampdu_action(struct ieee80211_hw *hw,
ret = iwl_mvm_sta_rx_agg(mvm, sta, tid, 0, false);
break;
case IEEE80211_AMPDU_TX_START:
- if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG) {
+ if (!iwl_enable_tx_ampdu(mvm->cfg)) {
ret = -EINVAL;
break;
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Heinz Mauelshagen <[email protected]>
commit e893fba90c09f9b57fb97daae204ea9cc2c52fa5 upstream.
In order to avoid wasting cache space a partial block at the end of the
origin device is not cached. Unfortunately, the check for such a
partial block at the end of the origin device was flawed.
Fix accesses beyond the end of the origin device that occured due to
attempted promotion of an undetected partial block by:
- initializing the per bio data struct to allow cache_end_io to work properly
- recognizing access to the partial block at the end of the origin device
- avoiding out of bounds access to the discard bitset
Otherwise, users can experience errors like the following:
attempt to access beyond end of device
dm-5: rw=0, want=20971520, limit=20971456
...
device-mapper: cache: promotion failed; couldn't copy block
Signed-off-by: Heinz Mauelshagen <[email protected]>
Acked-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/dm-cache-target.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c
index e36beca..a2d7e04 100644
--- a/drivers/md/dm-cache-target.c
+++ b/drivers/md/dm-cache-target.c
@@ -2179,20 +2179,18 @@ static int cache_map(struct dm_target *ti, struct bio *bio)
bool discarded_block;
struct dm_bio_prison_cell *cell;
struct policy_result lookup_result;
- struct per_bio_data *pb;
+ struct per_bio_data *pb = init_per_bio_data(bio, pb_data_size);
- if (from_oblock(block) > from_oblock(cache->origin_blocks)) {
+ if (unlikely(from_oblock(block) >= from_oblock(cache->origin_blocks))) {
/*
* This can only occur if the io goes to a partial block at
* the end of the origin device. We don't cache these.
* Just remap to the origin and carry on.
*/
- remap_to_origin_clear_discard(cache, bio, block);
+ remap_to_origin(cache, bio);
return DM_MAPIO_REMAPPED;
}
- pb = init_per_bio_data(bio, pb_data_size);
-
if (bio->bi_rw & (REQ_FLUSH | REQ_FUA | REQ_DISCARD)) {
defer_bio(cache, bio);
return DM_MAPIO_SUBMITTED;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 0a8d8c446b5429d15ff2d48f46e00d8a08552303 upstream.
Since commit d25f06ea466e "vmxnet3: fix netpoll race condition",
the vmxnet3 driver fails to build when CONFIG_PCI_MSI is disabled,
because it unconditionally references the vmxnet3_msix_rx()
function.
To fix this, use the same #ifdef in the caller that exists around
the function definition.
Signed-off-by: Arnd Bergmann <[email protected]>
Cc: Neil Horman <[email protected]>
Cc: Shreyas Bhatewara <[email protected]>
Cc: "VMware, Inc." <[email protected]>
Cc: "David S. Miller" <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/vmxnet3/vmxnet3_drv.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 434837f..d081585 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -1740,13 +1740,16 @@ static void
vmxnet3_netpoll(struct net_device *netdev)
{
struct vmxnet3_adapter *adapter = netdev_priv(netdev);
- int i;
switch (adapter->intr.type) {
- case VMXNET3_IT_MSIX:
+#ifdef CONFIG_PCI_MSI
+ case VMXNET3_IT_MSIX: {
+ int i;
for (i = 0; i < adapter->num_rx_queues; i++)
vmxnet3_msix_rx(0, &adapter->rx_queue[i]);
break;
+ }
+#endif
case VMXNET3_IT_MSI:
default:
vmxnet3_intr(0, adapter->netdev);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Weinberger <[email protected]>
commit 62c19c9d29e65086e5ae76df371ed2e6b23f00cd upstream.
The symbol is an orphan, don't depend on it anymore.
Signed-off-by: Richard Weinberger <[email protected]>
[wsa: enhanced commit message]
Signed-off-by: Wolfram Sang <[email protected]>
Fixes: 687b81d083c0 (i2c: move OF helpers into the core)
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/i2c/busses/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index dc6dea6..556a42b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -375,7 +375,7 @@ config I2C_CBUS_GPIO
config I2C_CPM
tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
- depends on (CPM1 || CPM2) && OF_I2C
+ depends on CPM1 || CPM2
help
This supports the use of the I2C interface on Freescale
processors with CPM1 or CPM2.
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 7b1bbe883b3ed962ca2be4daf321f318f5091340 upstream.
When we disable the rings, set the status properly. If
not other code pathes may try and use the rings which are
not functional at this point.
Signed-off-by: Alex Deucher <[email protected]>
[ luis: backported to 3.11:
- cik_sdma_gfx_stop() is defined in file cik.c ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/cik.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index 8748a86..405bf0c 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -3349,6 +3349,8 @@ static void cik_sdma_gfx_stop(struct radeon_device *rdev)
WREG32(SDMA0_GFX_RB_CNTL + reg_offset, rb_cntl);
WREG32(SDMA0_GFX_IB_CNTL + reg_offset, 0);
}
+ rdev->ring[R600_RING_TYPE_DMA_INDEX].ready = false;
+ rdev->ring[CAYMAN_RING_TYPE_DMA1_INDEX].ready = false;
}
/**
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Rob Clark <[email protected]>
commit 9ef7506f7eff3fc42724269f62e30164c141661f upstream.
A few of the simpler TTM drivers (cirrus, ast, mgag200) do not implement
this function. Yet can end up somehow with an evicted bo:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [< (null)>] (null)
PGD 16e761067 PUD 16e6cf067 PMD 0
Oops: 0010 [#1] SMP
Modules linked in: bnep bluetooth rfkill fuse ip6t_rpfilter ip6t_REJECT ipt_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ip_tables sg btrfs zlib_deflate raid6_pq xor dm_queue_length iTCO_wdt iTCO_vendor_support coretemp kvm dcdbas dm_service_time microcode serio_raw pcspkr lpc_ich mfd_core i7core_edac edac_core ses enclosure ipmi_si ipmi_msghandler shpchp acpi_power_meter mperf nfsd auth_rpcgss nfs_acl lockd uinput sunrpc dm_multipath xfs libcrc32c ata_generic pata_acpi sr_mod cdrom
sd_mod usb_storage mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit lpfc drm_kms_helper ttm crc32c_intel ata_piix bfa drm ixgbe libata i2c_core mdio crc_t10dif ptp crct10dif_common pps_core scsi_transport_fc dca scsi_tgt megaraid_sas bnx2 dm_mirror dm_region_hash dm_log dm_mod
CPU: 16 PID: 2572 Comm: X Not tainted 3.10.0-86.el7.x86_64 #1
Hardware name: Dell Inc. PowerEdge R810/0H235N, BIOS 0.3.0 11/14/2009
task: ffff8801799dabc0 ti: ffff88016c884000 task.ti: ffff88016c884000
RIP: 0010:[<0000000000000000>] [< (null)>] (null)
RSP: 0018:ffff88016c885ad8 EFLAGS: 00010202
RAX: ffffffffa04e94c0 RBX: ffff880178937a20 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000240004 RDI: ffff880178937a00
RBP: ffff88016c885b60 R08: 00000000000171a0 R09: ffff88007cf171a0
R10: ffffea0005842540 R11: ffffffff810487b9 R12: ffff880178937b30
R13: ffff880178937a00 R14: ffff88016c885b78 R15: ffff880179929400
FS: 00007f81ba2ef980(0000) GS:ffff88007cf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000016e763000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
ffffffffa0306fae ffff8801799295c0 0000000000260004 0000000000000001
ffff88016c885b60 ffffffffa0307669 00ff88007cf17738 ffff88017cf17700
ffff880178937a00 ffff880100000000 ffff880100000000 0000000079929400
Call Trace:
[<ffffffffa0306fae>] ? ttm_bo_handle_move_mem+0x54e/0x5b0 [ttm]
[<ffffffffa0307669>] ? ttm_bo_mem_space+0x169/0x340 [ttm]
[<ffffffffa0307bd7>] ttm_bo_move_buffer+0x117/0x130 [ttm]
[<ffffffff81130001>] ? perf_event_init_context+0x141/0x220
[<ffffffffa0307cb1>] ttm_bo_validate+0xc1/0x130 [ttm]
[<ffffffffa04e7377>] mgag200_bo_pin+0x87/0xc0 [mgag200]
[<ffffffffa04e56c4>] mga_crtc_cursor_set+0x474/0xbb0 [mgag200]
[<ffffffff811971d2>] ? __mem_cgroup_commit_charge+0x152/0x3b0
[<ffffffff815c4182>] ? mutex_lock+0x12/0x2f
[<ffffffffa0201433>] drm_mode_cursor_common+0x123/0x170 [drm]
[<ffffffffa0205231>] drm_mode_cursor_ioctl+0x41/0x50 [drm]
[<ffffffffa01f5ca2>] drm_ioctl+0x502/0x630 [drm]
[<ffffffff815cbab4>] ? __do_page_fault+0x1f4/0x510
[<ffffffff8101cb68>] ? __restore_xstate_sig+0x218/0x4f0
[<ffffffff811b4445>] do_vfs_ioctl+0x2e5/0x4d0
[<ffffffff8124488e>] ? file_has_perm+0x8e/0xa0
[<ffffffff811b46b1>] SyS_ioctl+0x81/0xa0
[<ffffffff815d05d9>] system_call_fastpath+0x16/0x1b
Code: Bad RIP value.
RIP [< (null)>] (null)
RSP <ffff88016c885ad8>
CR2: 0000000000000000
Signed-off-by: Rob Clark <[email protected]>
Reviewed-by: Jérôme Glisse <[email protected]>
Reviewed-by: Thomas Hellstrom <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/ttm/ttm_bo.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index eb96c21..08dccdd 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -352,9 +352,11 @@ static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo,
moved:
if (bo->evicted) {
- ret = bdev->driver->invalidate_caches(bdev, bo->mem.placement);
- if (ret)
- pr_err("Can not flush read caches\n");
+ if (bdev->driver->invalidate_caches) {
+ ret = bdev->driver->invalidate_caches(bdev, bo->mem.placement);
+ if (ret)
+ pr_err("Can not flush read caches\n");
+ }
bo->evicted = false;
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit b2b3d8d952e4f8d6ac2ce80be96b937f29f6e42e upstream.
When we disable the rings, set the status properly. If
not other code pathes may try and use the rings which are
not functional at this point.
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/cik.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index 403aecb..7ab8bdc 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -2676,8 +2676,11 @@ static void cik_cp_compute_enable(struct radeon_device *rdev, bool enable)
{
if (enable)
WREG32(CP_MEC_CNTL, 0);
- else
+ else {
WREG32(CP_MEC_CNTL, (MEC_ME1_HALT | MEC_ME2_HALT));
+ rdev->ring[CAYMAN_RING_TYPE_CP1_INDEX].ready = false;
+ rdev->ring[CAYMAN_RING_TYPE_CP2_INDEX].ready = false;
+ }
udelay(50);
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 07ae78c9798b79bad3d3adf983c94ba23fde54d4 upstream.
We always stop the rings when disabling the engines so just
call the stop functions directly from the sdma enable function.
This way the rings' status is set correctly on suspend so
there are no problems on resume. Fixes resume failures that
result in acceleration getting disabled.
Signed-off-by: Alex Deucher <[email protected]>
[ luis: backported to 3.11:
- affected code is in file cik.c ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/cik.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index 405bf0c..403aecb 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -3378,6 +3378,11 @@ static void cik_sdma_enable(struct radeon_device *rdev, bool enable)
u32 me_cntl, reg_offset;
int i;
+ if (enable == false) {
+ cik_sdma_gfx_stop(rdev);
+ cik_sdma_rlc_stop(rdev);
+ }
+
for (i = 0; i < 2; i++) {
if (i == 0)
reg_offset = SDMA0_REGISTER_OFFSET;
@@ -3505,10 +3510,6 @@ static int cik_sdma_load_microcode(struct radeon_device *rdev)
if (!rdev->sdma_fw)
return -EINVAL;
- /* stop the gfx rings and rlc compute queues */
- cik_sdma_gfx_stop(rdev);
- cik_sdma_rlc_stop(rdev);
-
/* halt the MEs */
cik_sdma_enable(rdev, false);
@@ -3577,9 +3578,6 @@ static int cik_sdma_resume(struct radeon_device *rdev)
*/
static void cik_sdma_fini(struct radeon_device *rdev)
{
- /* stop the gfx rings and rlc compute queues */
- cik_sdma_gfx_stop(rdev);
- cik_sdma_rlc_stop(rdev);
/* halt the MEs */
cik_sdma_enable(rdev, false);
radeon_ring_fini(rdev, &rdev->ring[R600_RING_TYPE_DMA_INDEX]);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Artem Fetishev <[email protected]>
commit 70335abb2689c8cd5df91bf2d95a65649addf50b upstream.
The expected logic of proc_map_files_get_link() is either to return 0
and initialize 'path' or return an error and leave 'path' uninitialized.
By the time dname_to_vma_addr() returns 0 the corresponding vma may have
already be gone. In this case the path is not initialized but the
return value is still 0. This results in 'general protection fault'
inside d_path().
Steps to reproduce:
CONFIG_CHECKPOINT_RESTORE=y
fd = open(...);
while (1) {
mmap(fd, ...);
munmap(fd, ...);
}
ls -la /proc/$PID/map_files
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=68991
Signed-off-by: Artem Fetishev <[email protected]>
Signed-off-by: Aleksandr Terekhov <[email protected]>
Reported-by: <[email protected]>
Acked-by: Pavel Emelyanov <[email protected]>
Acked-by: Cyrill Gorcunov <[email protected]>
Reviewed-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/proc/base.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 1485e38..c35eaa4 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1813,6 +1813,7 @@ static int proc_map_files_get_link(struct dentry *dentry, struct path *path)
if (rc)
goto out_mmput;
+ rc = -ENOENT;
down_read(&mm->mmap_sem);
vma = find_exact_vma(mm, vm_start, vm_end);
if (vma && vma->vm_file) {
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Heinz Mauelshagen <[email protected]>
commit 8b9d96666529a979acf4825391efcc7c8a3e9f12 upstream.
During demotion or promotion to a cache's >2TB fast device we must not
truncate the cache block's associated sector to 32bits. The 32bit
temporary result of from_cblock() caused a 32bit multiplication when
calculating the sector of the fast device in issue_copy_real().
Use an intermediate 64bit type to store the 32bit from_cblock() to allow
for proper 64bit multiplication.
Here is an example of how this bug manifests on an ext4 filesystem:
EXT4-fs error (device dm-0): ext4_mb_generate_buddy:756: group 17136, 32768 clusters in bitmap, 30688 in gd; block bitmap corrupt.
JBD2: Spotted dirty metadata buffer (dev = dm-0, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
Signed-off-by: Heinz Mauelshagen <[email protected]>
Acked-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/dm-cache-target.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c
index d8dbc2f..e36beca 100644
--- a/drivers/md/dm-cache-target.c
+++ b/drivers/md/dm-cache-target.c
@@ -865,12 +865,13 @@ static void issue_copy_real(struct dm_cache_migration *mg)
int r;
struct dm_io_region o_region, c_region;
struct cache *cache = mg->cache;
+ sector_t cblock = from_cblock(mg->cblock);
o_region.bdev = cache->origin_dev->bdev;
o_region.count = cache->sectors_per_block;
c_region.bdev = cache->cache_dev->bdev;
- c_region.sector = from_cblock(mg->cblock) * cache->sectors_per_block;
+ c_region.sector = cblock * cache->sectors_per_block;
c_region.count = cache->sectors_per_block;
if (mg->writeback || mg->demote) {
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: =?UTF-8?q?Radim=20Kr=C4=8Dm=C3=A1=C5=99?= <[email protected]>
commit 596f3142d2b7be307a1652d59e7b93adab918437 upstream.
We always disable cr8 intercept in its handler, but only re-enable it
if handling KVM_REQ_EVENT, so there can be a window where we do not
intercept cr8 writes, which allows an interrupt to disrupt a higher
priority task.
Fix this by disabling intercepts in the same function that re-enables
them when needed. This fixes BSOD in Windows 2008.
Signed-off-by: Radim Krčmář <[email protected]>
Reviewed-by: Marcelo Tosatti <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/kvm/svm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index c0bc803..612c717 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2993,10 +2993,8 @@ static int cr8_write_interception(struct vcpu_svm *svm)
u8 cr8_prev = kvm_get_cr8(&svm->vcpu);
/* instruction emulation calls kvm_set_cr8() */
r = cr_interception(svm);
- if (irqchip_in_kernel(svm->vcpu.kvm)) {
- clr_cr_intercept(svm, INTERCEPT_CR8_WRITE);
+ if (irqchip_in_kernel(svm->vcpu.kvm))
return r;
- }
if (cr8_prev <= kvm_get_cr8(&svm->vcpu))
return r;
kvm_run->exit_reason = KVM_EXIT_SET_TPR;
@@ -3558,6 +3556,8 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr)
if (is_guest_mode(vcpu) && (vcpu->arch.hflags & HF_VINTR_MASK))
return;
+ clr_cr_intercept(svm, INTERCEPT_CR8_WRITE);
+
if (irr == -1)
return;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Giridhar Malavali <[email protected]>
commit b77ed25c9f8402e8b3e49e220edb4ef09ecfbb53 upstream.
Signed-off-by: Giridhar Malavali <[email protected]>
Signed-off-by: Saurav Kashyap <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/scsi/qla2xxx/qla_def.h | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 95ca32a..197bc15 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2980,8 +2980,7 @@ struct qla_hw_data {
IS_QLA25XX(ha) || IS_QLA81XX(ha) || \
IS_QLA82XX(ha) || IS_QLA83XX(ha))
#define IS_MSIX_NACK_CAPABLE(ha) (IS_QLA81XX(ha) || IS_QLA83XX(ha))
-#define IS_NOPOLLING_TYPE(ha) ((IS_QLA25XX(ha) || IS_QLA81XX(ha) || \
- IS_QLA83XX(ha)) && (ha)->flags.msix_enabled)
+#define IS_NOPOLLING_TYPE(ha) (IS_QLA81XX(ha) && (ha)->flags.msix_enabled)
#define IS_FAC_REQUIRED(ha) (IS_QLA81XX(ha) || IS_QLA83XX(ha))
#define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha) || IS_QLA83XX(ha))
#define IS_ALOGIO_CAPABLE(ha) (IS_QLA23XX(ha) || IS_FWI2_CAPABLE(ha))
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Neil Horman <[email protected]>
commit d25f06ea466ea521b563b76661180b4e44714ae6 upstream.
vmxnet3's netpoll driver is incorrectly coded. It directly calls
vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll
controller method doesn't block real napi polls in any way, there is a potential
for race conditions in which the netpoll controller method and the napi poll
method run concurrently. The result is data corruption causing panics such as this
one recently observed:
PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg"
#0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b
#1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92
#2 [ffff88023abd58b0] oops_end at ffffffff8152b570
#3 [ffff88023abd58e0] die at ffffffff81010e0b
#4 [ffff88023abd5910] do_trap at ffffffff8152add4
#5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95
#6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b
[exception RIP: vmxnet3_rq_rx_complete+1968]
RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086
RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0
RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0
RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048
R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8
R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3]
#8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3]
#9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7
The fix is to do as other drivers do, and have the poll controller call the top
half interrupt handler, which schedules a napi poll properly to recieve frames
Tested by myself, successfully.
Signed-off-by: Neil Horman <[email protected]>
CC: Shreyas Bhatewara <[email protected]>
CC: "VMware, Inc." <[email protected]>
CC: "David S. Miller" <[email protected]>
Reviewed-by: Shreyas N Bhatewara <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/vmxnet3/vmxnet3_drv.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 55a62ca..434837f 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -1740,12 +1740,18 @@ static void
vmxnet3_netpoll(struct net_device *netdev)
{
struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ int i;
- if (adapter->intr.mask_mode == VMXNET3_IMM_ACTIVE)
- vmxnet3_disable_all_intrs(adapter);
-
- vmxnet3_do_poll(adapter, adapter->rx_queue[0].rx_ring[0].size);
- vmxnet3_enable_all_intrs(adapter);
+ switch (adapter->intr.type) {
+ case VMXNET3_IT_MSIX:
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ vmxnet3_msix_rx(0, &adapter->rx_queue[i]);
+ break;
+ case VMXNET3_IT_MSI:
+ default:
+ vmxnet3_intr(0, adapter->netdev);
+ break;
+ }
}
#endif /* CONFIG_NET_POLL_CONTROLLER */
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ales Novak <[email protected]>
commit b12bb60d6c350b348a4e1460cd68f97ccae9822e upstream.
If the initialization of storvsc fails, the storvsc_device_destroy()
causes NULL pointer dereference.
storvsc_bus_scan()
scsi_scan_target()
__scsi_scan_target()
scsi_probe_and_add_lun(hostdata=NULL)
scsi_alloc_sdev(hostdata=NULL)
sdev->hostdata = hostdata
now the host allocation fails
__scsi_remove_device(sdev)
calls sdev->host->hostt->slave_destroy() ==
storvsc_device_destroy(sdev)
access of sdev->hostdata->request_mempool
Signed-off-by: Ales Novak <[email protected]>
Signed-off-by: Thomas Abraham <[email protected]>
Reviewed-by: Jiri Kosina <[email protected]>
Acked-by: K. Y. Srinivasan <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/scsi/storvsc_drv.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 93d0707..eeb6795 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1419,6 +1419,9 @@ static void storvsc_device_destroy(struct scsi_device *sdevice)
{
struct stor_mem_pools *memp = sdevice->hostdata;
+ if (!memp)
+ return;
+
mempool_destroy(memp->request_mempool);
kmem_cache_destroy(memp->request_pool);
kfree(memp);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Helgaas <[email protected]>
commit 3cdeb713dc66057b50682048c151eae07b186c42 upstream.
Andreas reported that after 1f42db786b14 ("PCI: Enable INTx if BIOS left
them disabled"), pciehp surprise removal stopped working.
This happens because pci_reenable_device() on the hotplug bridge (used in
the pciehp_configure_device() path) clears the Interrupt Disable bit, which
apparently breaks the bridge's MSI hotplug event reporting.
Previously we cleared the Interrupt Disable bit in do_pci_enable_device(),
which is used by both pci_enable_device() and pci_reenable_device(). But
we use pci_reenable_device() after the driver may have enabled MSI or
MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X.
This patch clears Interrupt Disable only when MSI/MSI-X has not been
enabled.
Fixes: 1f42db786b14 PCI: Enable INTx if BIOS left them disabled
Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691
Reported-and-tested-by: Andreas Noever <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
CC: Sarah Sharp <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/pci/pci.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1088e0d..b5352fc 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1130,6 +1130,9 @@ static int do_pci_enable_device(struct pci_dev *dev, int bars)
return err;
pci_fixup_device(pci_fixup_enable, dev);
+ if (dev->msi_enabled || dev->msix_enabled)
+ return 0;
+
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (pin) {
pci_read_config_word(dev, PCI_COMMAND, &cmd);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <[email protected]>
commit ddfadd7736b677de2d4ca2cd5b4b655368c85a7a upstream.
Remove an erroneous BUG_ON() in the case of a hard reset timeout. The
reset timeout handler puts the port into the "awaiting link-up" state.
The timeout causes the device to be disconnected and we need to be in
the awaiting link-up state to re-connect the port. The BUG_ON() made
the incorrect assumption that resets never timeout and we always
complete the reset in the "resetting" state.
Testing this patch also uncovered that libata continues to attempt to
reset the port long after the driver has torn down the context. Once
the driver has committed to abandoning the link it must indicate to
libata that recovery ends by returning -ENODEV from
->lldd_I_T_nexus_reset().
Acked-by: Lukasz Dorau <[email protected]>
Reported-by: David Milburn <[email protected]>
Reported-by: Xun Ni <[email protected]>
Tested-by: Xun Ni <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/scsi/isci/port_config.c | 7 -------
drivers/scsi/isci/task.c | 2 +-
2 files changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c
index cd962da..5017bde 100644
--- a/drivers/scsi/isci/port_config.c
+++ b/drivers/scsi/isci/port_config.c
@@ -615,13 +615,6 @@ static void sci_apc_agent_link_up(struct isci_host *ihost,
SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION);
} else {
/* the phy is already the part of the port */
- u32 port_state = iport->sm.current_state_id;
-
- /* if the PORT'S state is resetting then the link up is from
- * port hard reset in this case, we need to tell the port
- * that link up is recieved
- */
- BUG_ON(port_state != SCI_PORT_RESETTING);
port_agent->phy_ready_mask |= 1 << phy_index;
sci_port_link_up(iport, iphy);
}
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 0d30ca8..5d6fda7 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -801,7 +801,7 @@ int isci_task_I_T_nexus_reset(struct domain_device *dev)
/* XXX: need to cleanup any ireqs targeting this
* domain_device
*/
- ret = TMF_RESP_FUNC_COMPLETE;
+ ret = -ENODEV;
goto out;
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Laura Abbott <[email protected]>
commit 2af120bc040c5ebcda156df6be6a66610ab6957f upstream.
We received several reports of bad page state when freeing CMA pages
previously allocated with alloc_contig_range:
BUG: Bad page state in process Binder_A pfn:63202
page:d21130b0 count:0 mapcount:1 mapping: (null) index:0x7dfbf
page flags: 0x40080068(uptodate|lru|active|swapbacked)
Based on the page state, it looks like the page was still in use. The
page flags do not make sense for the use case though. Further debugging
showed that despite alloc_contig_range returning success, at least one
page in the range still remained in the buddy allocator.
There is an issue with isolate_freepages_block. In strict mode (which
CMA uses), if any pages in the range cannot be isolated,
isolate_freepages_block should return failure 0. The current check
keeps track of the total number of isolated pages and compares against
the size of the range:
if (strict && nr_strict_required > total_isolated)
total_isolated = 0;
After taking the zone lock, if one of the pages in the range is not in
the buddy allocator, we continue through the loop and do not increment
total_isolated. If in the last iteration of the loop we isolate more
than one page (e.g. last page needed is a higher order page), the check
for total_isolated may pass and we fail to detect that a page was
skipped. The fix is to bail out if the loop immediately if we are in
strict mode. There's no benfit to continuing anyway since we need all
pages to be isolated. Additionally, drop the error checking based on
nr_strict_required and just check the pfn ranges. This matches with
what isolate_freepages_range does.
Signed-off-by: Laura Abbott <[email protected]>
Acked-by: Minchan Kim <[email protected]>
Cc: Mel Gorman <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Acked-by: Bartlomiej Zolnierkiewicz <[email protected]>
Acked-by: Michal Nazarewicz <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
mm/compaction.c | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/mm/compaction.c b/mm/compaction.c
index 9a3e351..18a90b4 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -252,7 +252,6 @@ static unsigned long isolate_freepages_block(struct compact_control *cc,
{
int nr_scanned = 0, total_isolated = 0;
struct page *cursor, *valid_page = NULL;
- unsigned long nr_strict_required = end_pfn - blockpfn;
unsigned long flags;
bool locked = false;
@@ -265,11 +264,12 @@ static unsigned long isolate_freepages_block(struct compact_control *cc,
nr_scanned++;
if (!pfn_valid_within(blockpfn))
- continue;
+ goto isolate_fail;
+
if (!valid_page)
valid_page = page;
if (!PageBuddy(page))
- continue;
+ goto isolate_fail;
/*
* The zone lock must be held to isolate freepages.
@@ -290,12 +290,10 @@ static unsigned long isolate_freepages_block(struct compact_control *cc,
/* Recheck this is a buddy page under lock */
if (!PageBuddy(page))
- continue;
+ goto isolate_fail;
/* Found a free page, break it into order-0 pages */
isolated = split_free_page(page);
- if (!isolated && strict)
- break;
total_isolated += isolated;
for (i = 0; i < isolated; i++) {
list_add(&page->lru, freelist);
@@ -306,7 +304,15 @@ static unsigned long isolate_freepages_block(struct compact_control *cc,
if (isolated) {
blockpfn += isolated - 1;
cursor += isolated - 1;
+ continue;
}
+
+isolate_fail:
+ if (strict)
+ break;
+ else
+ continue;
+
}
trace_mm_compaction_isolate_freepages(nr_scanned, total_isolated);
@@ -316,7 +322,7 @@ static unsigned long isolate_freepages_block(struct compact_control *cc,
* pages requested were isolated. If there were any failures, 0 is
* returned and CMA will fail.
*/
- if (strict && nr_strict_required > total_isolated)
+ if (strict && blockpfn < end_pfn)
total_isolated = 0;
if (locked)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukasz Dorau <[email protected]>
commit c59053a23d586675c25d789a7494adfdc02fba57 upstream.
In the first place, the loop 'for' in the macro 'for_each_isci_host'
(drivers/scsi/isci/host.h:314) is incorrect, because it accesses
the 3rd element of 2 element array. After the 2nd iteration it executes
the instruction:
ihost = to_pci_info(pdev)->hosts[2]
(while the size of the 'hosts' array equals 2) and reads an
out of range element.
In the second place, this loop is incorrectly optimized by GCC v4.8
(see http://marc.info/?l=linux-kernel&m=138998871911336&w=2).
As a result, on platforms with two SCU controllers,
the loop is executed more times than it can be (for i=0,1 and 2).
It causes kernel panic during entering the S3 state
and the following oops after 'rmmod isci':
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8131360b>] __list_add+0x1b/0xc0
Oops: 0000 [#1] SMP
RIP: 0010:[<ffffffff8131360b>] [<ffffffff8131360b>] __list_add+0x1b/0xc0
Call Trace:
[<ffffffff81661b84>] __mutex_lock_slowpath+0x114/0x1b0
[<ffffffff81661c3f>] mutex_lock+0x1f/0x30
[<ffffffffa03e97cb>] sas_disable_events+0x1b/0x50 [libsas]
[<ffffffffa03e9818>] sas_unregister_ha+0x18/0x60 [libsas]
[<ffffffffa040316e>] isci_unregister+0x1e/0x40 [isci]
[<ffffffffa0403efd>] isci_pci_remove+0x5d/0x100 [isci]
[<ffffffff813391cb>] pci_device_remove+0x3b/0xb0
[<ffffffff813fbf7f>] __device_release_driver+0x7f/0xf0
[<ffffffff813fc8f8>] driver_detach+0xa8/0xb0
[<ffffffff813fbb8b>] bus_remove_driver+0x9b/0x120
[<ffffffff813fcf2c>] driver_unregister+0x2c/0x50
[<ffffffff813381f3>] pci_unregister_driver+0x23/0x80
[<ffffffffa04152f8>] isci_exit+0x10/0x1e [isci]
[<ffffffff810d199b>] SyS_delete_module+0x16b/0x2d0
[<ffffffff81012a21>] ? do_notify_resume+0x61/0xa0
[<ffffffff8166ce29>] system_call_fastpath+0x16/0x1b
The loop has been corrected.
This patch fixes kernel panic during entering the S3 state
and the above oops.
Signed-off-by: Lukasz Dorau <[email protected]>
Reviewed-by: Maciej Patelczyk <[email protected]>
Tested-by: Lukasz Dorau <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/scsi/isci/host.h | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 4911310..22a9bb1 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -311,9 +311,8 @@ static inline struct Scsi_Host *to_shost(struct isci_host *ihost)
}
#define for_each_isci_host(id, ihost, pdev) \
- for (id = 0, ihost = to_pci_info(pdev)->hosts[id]; \
- id < ARRAY_SIZE(to_pci_info(pdev)->hosts) && ihost; \
- ihost = to_pci_info(pdev)->hosts[++id])
+ for (id = 0; id < SCI_MAX_CONTROLLERS && \
+ (ihost = to_pci_info(pdev)->hosts[id]); id++)
static inline void wait_for_start(struct isci_host *ihost)
{
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit 1b56e98990bcdbb20b9fab163654b9315bf158e8 upstream.
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/ocfs2/file.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 3261d71..fb4b887 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -2374,8 +2374,8 @@ out_dio:
if (((file->f_flags & O_DSYNC) && !direct_io) || IS_SYNC(inode) ||
((file->f_flags & O_DIRECT) && !direct_io)) {
- ret = filemap_fdatawrite_range(file->f_mapping, pos,
- pos + count - 1);
+ ret = filemap_fdatawrite_range(file->f_mapping, *ppos,
+ *ppos + count - 1);
if (ret < 0)
written = ret;
@@ -2388,8 +2388,8 @@ out_dio:
}
if (!ret)
- ret = filemap_fdatawait_range(file->f_mapping, pos,
- pos + count - 1);
+ ret = filemap_fdatawait_range(file->f_mapping, *ppos,
+ *ppos + count - 1);
}
/*
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Amitkumar Karwar <[email protected]>
commit c99b1861c232e1f641f13b8645e0febb3712cc71 upstream.
While preparing association request, intersection of device's HT
capability information and corresponding fields advertised by AP
is used.
This patch fixes an error while copying this field from AP's
beacon.
Signed-off-by: Amitkumar Karwar <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/mwifiex/11n.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c
index 41e9d25..2658c8c 100644
--- a/drivers/net/wireless/mwifiex/11n.c
+++ b/drivers/net/wireless/mwifiex/11n.c
@@ -307,8 +307,7 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,
ht_cap->header.len =
cpu_to_le16(sizeof(struct ieee80211_ht_cap));
memcpy((u8 *) ht_cap + sizeof(struct mwifiex_ie_types_header),
- (u8 *) bss_desc->bcn_ht_cap +
- sizeof(struct ieee_types_header),
+ (u8 *)bss_desc->bcn_ht_cap,
le16_to_cpu(ht_cap->header.len));
mwifiex_fill_cap_info(priv, radio_type, ht_cap);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Anton Blanchard <[email protected]>
commit d746ca9561440685edb62614d1bcbbc27ff50e66 upstream.
The code to load a MAC address into a u64 for passing to the
hypervisor via a register is broken on little endian.
Create a helper function called ibmveth_encode_mac_addr
which does the right thing in both big and little endian.
We were storing the MAC address in a long in struct ibmveth_adapter.
It's never used so remove it - we don't need another place in the
driver where we create endian issues with MAC addresses.
Signed-off-by: Anton Blanchard <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/ibm/ibmveth.c | 25 ++++++++++++++++---------
drivers/net/ethernet/ibm/ibmveth.h | 1 -
2 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index 70fd559..2b3aada 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -523,10 +523,21 @@ retry:
return rc;
}
+static u64 ibmveth_encode_mac_addr(u8 *mac)
+{
+ int i;
+ u64 encoded = 0;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ encoded = (encoded << 8) | mac[i];
+
+ return encoded;
+}
+
static int ibmveth_open(struct net_device *netdev)
{
struct ibmveth_adapter *adapter = netdev_priv(netdev);
- u64 mac_address = 0;
+ u64 mac_address;
int rxq_entries = 1;
unsigned long lpar_rc;
int rc;
@@ -580,8 +591,7 @@ static int ibmveth_open(struct net_device *netdev)
adapter->rx_queue.num_slots = rxq_entries;
adapter->rx_queue.toggle = 1;
- memcpy(&mac_address, netdev->dev_addr, netdev->addr_len);
- mac_address = mac_address >> 16;
+ mac_address = ibmveth_encode_mac_addr(netdev->dev_addr);
rxq_desc.fields.flags_len = IBMVETH_BUF_VALID |
adapter->rx_queue.queue_len;
@@ -1184,8 +1194,8 @@ static void ibmveth_set_multicast_list(struct net_device *netdev)
/* add the addresses to the filter table */
netdev_for_each_mc_addr(ha, netdev) {
/* add the multicast address to the filter table */
- unsigned long mcast_addr = 0;
- memcpy(((char *)&mcast_addr)+2, ha->addr, 6);
+ u64 mcast_addr;
+ mcast_addr = ibmveth_encode_mac_addr(ha->addr);
lpar_rc = h_multicast_ctrl(adapter->vdev->unit_address,
IbmVethMcastAddFilter,
mcast_addr);
@@ -1369,9 +1379,6 @@ static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
netif_napi_add(netdev, &adapter->napi, ibmveth_poll, 16);
- adapter->mac_addr = 0;
- memcpy(&adapter->mac_addr, mac_addr_p, 6);
-
netdev->irq = dev->irq;
netdev->netdev_ops = &ibmveth_netdev_ops;
netdev->ethtool_ops = &netdev_ethtool_ops;
@@ -1380,7 +1387,7 @@ static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
netdev->features |= netdev->hw_features;
- memcpy(netdev->dev_addr, &adapter->mac_addr, netdev->addr_len);
+ memcpy(netdev->dev_addr, mac_addr_p, ETH_ALEN);
for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) {
struct kobject *kobj = &adapter->rx_buff_pool[i].kobj;
diff --git a/drivers/net/ethernet/ibm/ibmveth.h b/drivers/net/ethernet/ibm/ibmveth.h
index 43a794f..48639ba 100644
--- a/drivers/net/ethernet/ibm/ibmveth.h
+++ b/drivers/net/ethernet/ibm/ibmveth.h
@@ -139,7 +139,6 @@ struct ibmveth_adapter {
struct napi_struct napi;
struct net_device_stats stats;
unsigned int mcastFilterSize;
- unsigned long mac_addr;
void * buffer_list_addr;
void * filter_list_addr;
dma_addr_t buffer_list_dma;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Anton Blanchard <[email protected]>
commit 0a13404dd3bf4ea870e3d96270b5a382edca85c0 upstream.
The unix socket code is using the result of csum_partial to
hash into a lookup table:
unix_hash_fold(csum_partial(sunaddr, len, 0));
csum_partial is only guaranteed to produce something that can be
folded into a checksum, as its prototype explains:
* returns a 32-bit number suitable for feeding into itself
* or csum_tcpudp_magic
The 32bit value should not be used directly.
Depending on the alignment, the ppc64 csum_partial will return
different 32bit partial checksums that will fold into the same
16bit checksum.
This difference causes the following testcase (courtesy of
Gustavo) to sometimes fail:
#include <sys/socket.h>
#include <stdio.h>
int main()
{
int fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0);
int i = 1;
setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &i, 4);
struct sockaddr addr;
addr.sa_family = AF_LOCAL;
bind(fd, &addr, 2);
listen(fd, 128);
struct sockaddr_storage ss;
socklen_t sslen = (socklen_t)sizeof(ss);
getsockname(fd, (struct sockaddr*)&ss, &sslen);
fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0);
if (connect(fd, (struct sockaddr*)&ss, sslen) == -1){
perror(NULL);
return 1;
}
printf("OK\n");
return 0;
}
As suggested by davem, fix this by using csum_fold to fold the
partial 32bit checksum into a 16bit checksum before using it.
Signed-off-by: Anton Blanchard <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/unix/af_unix.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index f246812..2ea3310 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -161,9 +161,8 @@ static inline void unix_set_secdata(struct scm_cookie *scm, struct sk_buff *skb)
static inline unsigned int unix_hash_fold(__wsum n)
{
- unsigned int hash = (__force unsigned int)n;
+ unsigned int hash = (__force unsigned int)csum_fold(n);
- hash ^= hash>>16;
hash ^= hash>>8;
return hash&(UNIX_HASH_SIZE-1);
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Amitkumar Karwar <[email protected]>
commit d51246481c7f28bbfa1f814ded2da65e531cd4b2 upstream.
While preparing association request, intersection of device's
VHT capability information and corresponding field advertised
by AP is used.
This patch fixes a couple errors while saving and copying vht_cap
and vht_oper fields from AP's beacon.
Signed-off-by: Amitkumar Karwar <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/mwifiex/11ac.c | 3 +--
drivers/net/wireless/mwifiex/scan.c | 8 ++++----
2 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/11ac.c b/drivers/net/wireless/mwifiex/11ac.c
index 5e0eec4..5d9a808 100644
--- a/drivers/net/wireless/mwifiex/11ac.c
+++ b/drivers/net/wireless/mwifiex/11ac.c
@@ -189,8 +189,7 @@ int mwifiex_cmd_append_11ac_tlv(struct mwifiex_private *priv,
vht_cap->header.len =
cpu_to_le16(sizeof(struct ieee80211_vht_cap));
memcpy((u8 *)vht_cap + sizeof(struct mwifiex_ie_types_header),
- (u8 *)bss_desc->bcn_vht_cap +
- sizeof(struct ieee_types_header),
+ (u8 *)bss_desc->bcn_vht_cap,
le16_to_cpu(vht_cap->header.len));
mwifiex_fill_vht_cap_tlv(priv, vht_cap, bss_desc->bss_band);
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 41f72c6..6f79bac 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -2072,12 +2072,12 @@ mwifiex_save_curr_bcn(struct mwifiex_private *priv)
curr_bss->ht_info_offset);
if (curr_bss->bcn_vht_cap)
- curr_bss->bcn_ht_cap = (void *)(curr_bss->beacon_buf +
- curr_bss->vht_cap_offset);
+ curr_bss->bcn_vht_cap = (void *)(curr_bss->beacon_buf +
+ curr_bss->vht_cap_offset);
if (curr_bss->bcn_vht_oper)
- curr_bss->bcn_ht_oper = (void *)(curr_bss->beacon_buf +
- curr_bss->vht_info_offset);
+ curr_bss->bcn_vht_oper = (void *)(curr_bss->beacon_buf +
+ curr_bss->vht_info_offset);
if (curr_bss->bcn_bss_co_2040)
curr_bss->bcn_bss_co_2040 =
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiko Carstens <[email protected]>
commit ef0899410ff630b2e75306da49996dbbfa318165 upstream.
"elevator: Fix a race in elevator switching and md device initialization"
changed the semantics of elevator_init() in a way that now enforces to hold
the corresponding request queue's sysfs_lock when calling elevator_init()
to fix a race.
The patch did not convert the s390 dasd device driver which is the only
device driver which also calls elevator_init(). So add the missing locking.
Cc: Tomoki Sekiyama <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/s390/block/dasd.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 451bf99..846d5c6 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2978,12 +2978,12 @@ static int dasd_alloc_queue(struct dasd_block *block)
elevator_exit(block->request_queue->elevator);
block->request_queue->elevator = NULL;
+ mutex_lock(&block->request_queue->sysfs_lock);
rc = elevator_init(block->request_queue, "deadline");
- if (rc) {
+ if (rc)
blk_cleanup_queue(block->request_queue);
- return rc;
- }
- return 0;
+ mutex_unlock(&block->request_queue->sysfs_lock);
+ return rc;
}
/*
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Chan <[email protected]>
commit d7b95315cc7f441418845a165ee56df723941487 upstream.
Redefine the RXD_ERR_MASK to include only relevant error bits. This fixes
a customer reported issue of randomly dropping packets on the 5719.
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/broadcom/tg3.c | 3 +--
drivers/net/ethernet/broadcom/tg3.h | 6 +++++-
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 849b141..c200bc2 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -6760,8 +6760,7 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
work_mask |= opaque_key;
- if ((desc->err_vlan & RXD_ERR_MASK) != 0 &&
- (desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII)) {
+ if (desc->err_vlan & RXD_ERR_MASK) {
drop_it:
tg3_recycle_rx(tnapi, tpr, opaque_key,
desc_idx, *post_ptr);
diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h
index cd63d11..f37417d 100644
--- a/drivers/net/ethernet/broadcom/tg3.h
+++ b/drivers/net/ethernet/broadcom/tg3.h
@@ -2588,7 +2588,11 @@ struct tg3_rx_buffer_desc {
#define RXD_ERR_TOO_SMALL 0x00400000
#define RXD_ERR_NO_RESOURCES 0x00800000
#define RXD_ERR_HUGE_FRAME 0x01000000
-#define RXD_ERR_MASK 0xffff0000
+
+#define RXD_ERR_MASK (RXD_ERR_BAD_CRC | RXD_ERR_COLLISION | \
+ RXD_ERR_LINK_LOST | RXD_ERR_PHY_DECODE | \
+ RXD_ERR_MAC_ABRT | RXD_ERR_TOO_SMALL | \
+ RXD_ERR_NO_RESOURCES | RXD_ERR_HUGE_FRAME)
u32 reserved;
u32 opaque;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <[email protected]>
commit 864a6040f395464003af8dd0d8ca86fed19866d4 upstream.
Avoid leaking data by sending uninitialized memory and setting an
invalid (non-zero) fragment number (the sequence number is ignored
anyway) by setting the seq_ctrl field to zero.
Fixes: 3f52b7e328c5 ("mac80211: mesh power save basics")
Fixes: ce662b44ce22 ("mac80211: send (QoS) Null if no buffered frames")
Reviewed-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/mac80211/mesh_ps.c | 1 +
net/mac80211/sta_info.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/net/mac80211/mesh_ps.c b/net/mac80211/mesh_ps.c
index 22290a9..641f432 100644
--- a/net/mac80211/mesh_ps.c
+++ b/net/mac80211/mesh_ps.c
@@ -36,6 +36,7 @@ static struct sk_buff *mps_qos_null_get(struct sta_info *sta)
sdata->vif.addr);
nullfunc->frame_control = fc;
nullfunc->duration_id = 0;
+ nullfunc->seq_ctrl = 0;
/* no address resolution for this frame -> set addr 1 immediately */
memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN);
memset(skb_put(skb, 2), 0, 2); /* append QoS control field */
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 662a620..db41c19 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -1118,6 +1118,7 @@ static void ieee80211_send_null_response(struct ieee80211_sub_if_data *sdata,
memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN);
memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
memcpy(nullfunc->addr3, sdata->vif.addr, ETH_ALEN);
+ nullfunc->seq_ctrl = 0;
skb->priority = tid;
skb_set_queue_mapping(skb, ieee802_1d_to_ac[tid]);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Emmanuel Grumbach <[email protected]>
commit 1e9291996c4eedf79883f47ec635235e39d3d6cd upstream.
Since the statistics handler is asynchrous, it can very well
be that we will handle the statistics (hence the RSSI
fluctuation) when we already disassociated.
Don't WARN on this case.
This solves: https://bugzilla.redhat.com/show_bug.cgi?id=1071998
Fixes: 2b76ef13086f ("iwlwifi: mvm: implement reduced Tx power")
Reviewed-by: Johannes Berg <[email protected]>
Signed-off-by: Emmanuel Grumbach <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/iwlwifi/mvm/bt-coex.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
index dbd622a..1486767 100644
--- a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c
@@ -544,8 +544,11 @@ void iwl_mvm_bt_rssi_event(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
mutex_lock(&mvm->mutex);
- /* Rssi update while not associated ?! */
- if (WARN_ON_ONCE(mvmvif->ap_sta_id == IWL_MVM_STATION_COUNT))
+ /*
+ * Rssi update while not associated - can happen since the statistics
+ * are handled asynchronously
+ */
+ if (mvmvif->ap_sta_id == IWL_MVM_STATION_COUNT)
goto out_unlock;
/* No open connection - reports should be disabled */
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann <[email protected]>
commit ec0223ec48a90cb605244b45f7c62de856403729 upstream.
RFC4895 introduced AUTH chunks for SCTP; during the SCTP
handshake RANDOM; CHUNKS; HMAC-ALGO are negotiated (CHUNKS
being optional though):
---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
<------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
-------------------- COOKIE-ECHO -------------------->
<-------------------- COOKIE-ACK ---------------------
A special case is when an endpoint requires COOKIE-ECHO
chunks to be authenticated:
---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
<------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
------------------ AUTH; COOKIE-ECHO ---------------->
<-------------------- COOKIE-ACK ---------------------
RFC4895, section 6.3. Receiving Authenticated Chunks says:
The receiver MUST use the HMAC algorithm indicated in
the HMAC Identifier field. If this algorithm was not
specified by the receiver in the HMAC-ALGO parameter in
the INIT or INIT-ACK chunk during association setup, the
AUTH chunk and all the chunks after it MUST be discarded
and an ERROR chunk SHOULD be sent with the error cause
defined in Section 4.1. [...] If no endpoint pair shared
key has been configured for that Shared Key Identifier,
all authenticated chunks MUST be silently discarded. [...]
When an endpoint requires COOKIE-ECHO chunks to be
authenticated, some special procedures have to be followed
because the reception of a COOKIE-ECHO chunk might result
in the creation of an SCTP association. If a packet arrives
containing an AUTH chunk as a first chunk, a COOKIE-ECHO
chunk as the second chunk, and possibly more chunks after
them, and the receiver does not have an STCB for that
packet, then authentication is based on the contents of
the COOKIE-ECHO chunk. In this situation, the receiver MUST
authenticate the chunks in the packet by using the RANDOM
parameters, CHUNKS parameters and HMAC_ALGO parameters
obtained from the COOKIE-ECHO chunk, and possibly a local
shared secret as inputs to the authentication procedure
specified in Section 6.3. If authentication fails, then
the packet is discarded. If the authentication is successful,
the COOKIE-ECHO and all the chunks after the COOKIE-ECHO
MUST be processed. If the receiver has an STCB, it MUST
process the AUTH chunk as described above using the STCB
from the existing association to authenticate the
COOKIE-ECHO chunk and all the chunks after it. [...]
Commit bbd0d59809f9 introduced the possibility to receive
and verification of AUTH chunk, including the edge case for
authenticated COOKIE-ECHO. On reception of COOKIE-ECHO,
the function sctp_sf_do_5_1D_ce() handles processing,
unpacks and creates a new association if it passed sanity
checks and also tests for authentication chunks being
present. After a new association has been processed, it
invokes sctp_process_init() on the new association and
walks through the parameter list it received from the INIT
chunk. It checks SCTP_PARAM_RANDOM, SCTP_PARAM_HMAC_ALGO
and SCTP_PARAM_CHUNKS, and copies them into asoc->peer
meta data (peer_random, peer_hmacs, peer_chunks) in case
sysctl -w net.sctp.auth_enable=1 is set. If in INIT's
SCTP_PARAM_SUPPORTED_EXT parameter SCTP_CID_AUTH is set,
peer_random != NULL and peer_hmacs != NULL the peer is to be
assumed asoc->peer.auth_capable=1, in any other case
asoc->peer.auth_capable=0.
Now, if in sctp_sf_do_5_1D_ce() chunk->auth_chunk is
available, we set up a fake auth chunk and pass that on to
sctp_sf_authenticate(), which at latest in
sctp_auth_calculate_hmac() reliably dereferences a NULL pointer
at position 0..0008 when setting up the crypto key in
crypto_hash_setkey() by using asoc->asoc_shared_key that is
NULL as condition key_id == asoc->active_key_id is true if
the AUTH chunk was injected correctly from remote. This
happens no matter what net.sctp.auth_enable sysctl says.
The fix is to check for net->sctp.auth_enable and for
asoc->peer.auth_capable before doing any operations like
sctp_sf_authenticate() as no key is activated in
sctp_auth_asoc_init_active_key() for each case.
Now as RFC4895 section 6.3 states that if the used HMAC-ALGO
passed from the INIT chunk was not used in the AUTH chunk, we
SHOULD send an error; however in this case it would be better
to just silently discard such a maliciously prepared handshake
as we didn't even receive a parameter at all. Also, as our
endpoint has no shared key configured, section 6.3 says that
MUST silently discard, which we are doing from now onwards.
Before calling sctp_sf_pdiscard(), we need not only to free
the association, but also the chunk->auth_chunk skb, as
commit bbd0d59809f9 created a skb clone in that case.
I have tested this locally by using netfilter's nfqueue and
re-injecting packets into the local stack after maliciously
modifying the INIT chunk (removing RANDOM; HMAC-ALGO param)
and the SCTP packet containing the COOKIE_ECHO (injecting
AUTH chunk before COOKIE_ECHO). Fixed with this patch applied.
Fixes: bbd0d59809f9 ("[SCTP]: Implement the receive and verification of AUTH chunk")
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: Vlad Yasevich <[email protected]>
Cc: Neil Horman <[email protected]>
Acked-by: Vlad Yasevich <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/sctp/sm_statefuns.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index f6b7109..7f59623 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -765,6 +765,13 @@ sctp_disposition_t sctp_sf_do_5_1D_ce(struct net *net,
struct sctp_chunk auth;
sctp_ierror_t ret;
+ /* Make sure that we and the peer are AUTH capable */
+ if (!net->sctp.auth_enable || !new_asoc->peer.auth_capable) {
+ kfree_skb(chunk->auth_chunk);
+ sctp_association_free(new_asoc);
+ return sctp_sf_pdiscard(net, ep, asoc, type, arg, commands);
+ }
+
/* set-up our fake chunk so that we can process it */
auth.skb = chunk->auth_chunk;
auth.asoc = chunk->asoc;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Hannes Frederic Sowa <[email protected]>
commit 916e4cf46d0204806c062c8c6c4d1f633852c5b6 upstream.
Currently we generate a new fragmentation id on UFO segmentation. It
is pretty hairy to identify the correct net namespace and dst there.
Especially tunnels use IFF_XMIT_DST_RELEASE and thus have no skb_dst
available at all.
This causes unreliable or very predictable ipv6 fragmentation id
generation while segmentation.
Luckily we already have pregenerated the ip6_frag_id in
ip6_ufo_append_data and can use it here.
Signed-off-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
net/ipv6/udp_offload.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/udp_offload.c b/net/ipv6/udp_offload.c
index f21df3f..09fe9a9 100644
--- a/net/ipv6/udp_offload.c
+++ b/net/ipv6/udp_offload.c
@@ -109,7 +109,7 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb,
fptr = (struct frag_hdr *)(skb_network_header(skb) + unfrag_ip6hlen);
fptr->nexthdr = nexthdr;
fptr->reserved = 0;
- ipv6_select_ident(fptr, (struct rt6_info *)skb_dst(skb));
+ fptr->identification = skb_shinfo(skb)->ip6_frag_id;
/* Fragment the skb. ipv6 header and the remaining fields of the
* fragment header are updated in ipv6_gso_segment()
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Wang <[email protected]>
commit 0e7ede80d929ff0f830c44a543daa1acd590c749 upstream.
We should alloc big buffers also when guest can receive UFO
packets to let the big packets fit into guest rx buffer.
Fixes 5c5167515d80f78f6bb538492c423adcae31ad65
(virtio-net: Allow UFO feature to be set and advertised.)
Cc: Rusty Russell <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Cc: Sridhar Samudrala <[email protected]>
Signed-off-by: Jason Wang <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Acked-by: Rusty Russell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/virtio_net.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index a0c05e0..2835bfe 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1597,7 +1597,8 @@ static int virtnet_probe(struct virtio_device *vdev)
/* If we can receive ANY GSO packets, we must allocate large ones. */
if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||
virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6) ||
- virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN))
+ virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN) ||
+ virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_UFO))
vi->big_packets = true;
if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Schillstrom <[email protected]>
commit accfe0e356327da5bd53da8852b93fc22de9b5fc upstream.
The commit 9195bb8e381d81d5a315f911904cdf0cfcc919b8 ("ipv6: improve
ipv6_find_hdr() to skip empty routing headers") broke ipv6_find_hdr().
When a target is specified like IPPROTO_ICMPV6 ipv6_find_hdr()
returns -ENOENT when it's found, not the header as expected.
A part of IPVS is broken and possible also nft_exthdr_eval().
When target is -1 which it is most cases, it works.
This patch exits the do while loop if the specific header is found
so the nexthdr could be returned as expected.
Reported-by: Art -kwaak- van Breemen <[email protected]>
Signed-off-by: Hans Schillstrom <[email protected]>
CC:Ansis Atteka <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/ipv6/exthdrs_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/exthdrs_core.c b/net/ipv6/exthdrs_core.c
index 140748d..8af3eb5 100644
--- a/net/ipv6/exthdrs_core.c
+++ b/net/ipv6/exthdrs_core.c
@@ -212,7 +212,7 @@ int ipv6_find_hdr(const struct sk_buff *skb, unsigned int *offset,
found = (nexthdr == target);
if ((!ipv6_ext_hdr(nexthdr)) || nexthdr == NEXTHDR_NONE) {
- if (target < 0)
+ if (target < 0 || found)
break;
return -ENOENT;
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
commit f5ddcbbb40aa0ba7fbfe22355d287603dbeeaaac upstream.
This patch fixes two bugs in fastopen :
1) The tcp_sendmsg(..., @size) argument was ignored.
Code was relying on user not fooling the kernel with iovec mismatches
2) When MTU is about 64KB, tcp_send_syn_data() attempts order-5
allocations, which are likely to fail when memory gets fragmented.
Fixes: 783237e8daf13 ("net-tcp: Fast Open client - sending SYN-data")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Yuchung Cheng <[email protected]>
Acked-by: Yuchung Cheng <[email protected]>
Tested-by: Yuchung Cheng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
include/net/tcp.h | 3 ++-
net/ipv4/tcp.c | 8 +++++---
net/ipv4/tcp_output.c | 7 ++++++-
3 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 46cb8a4..9e0f0f6 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1308,7 +1308,8 @@ struct tcp_fastopen_request {
/* Fast Open cookie. Size 0 means a cookie request */
struct tcp_fastopen_cookie cookie;
struct msghdr *data; /* data in MSG_FASTOPEN */
- u16 copied; /* queued in tcp_connect() */
+ size_t size;
+ int copied; /* queued in tcp_connect() */
};
void tcp_free_fastopen_req(struct tcp_sock *tp);
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 2d2e978..8e51886 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1004,7 +1004,8 @@ void tcp_free_fastopen_req(struct tcp_sock *tp)
}
}
-static int tcp_sendmsg_fastopen(struct sock *sk, struct msghdr *msg, int *size)
+static int tcp_sendmsg_fastopen(struct sock *sk, struct msghdr *msg,
+ int *copied, size_t size)
{
struct tcp_sock *tp = tcp_sk(sk);
int err, flags;
@@ -1019,11 +1020,12 @@ static int tcp_sendmsg_fastopen(struct sock *sk, struct msghdr *msg, int *size)
if (unlikely(tp->fastopen_req == NULL))
return -ENOBUFS;
tp->fastopen_req->data = msg;
+ tp->fastopen_req->size = size;
flags = (msg->msg_flags & MSG_DONTWAIT) ? O_NONBLOCK : 0;
err = __inet_stream_connect(sk->sk_socket, msg->msg_name,
msg->msg_namelen, flags);
- *size = tp->fastopen_req->copied;
+ *copied = tp->fastopen_req->copied;
tcp_free_fastopen_req(tp);
return err;
}
@@ -1043,7 +1045,7 @@ int tcp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
flags = msg->msg_flags;
if (flags & MSG_FASTOPEN) {
- err = tcp_sendmsg_fastopen(sk, msg, &copied_syn);
+ err = tcp_sendmsg_fastopen(sk, msg, &copied_syn, size);
if (err == -EINPROGRESS && copied_syn > 0)
goto out;
else if (err)
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 20d01ff..24b88d5 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2898,7 +2898,12 @@ static int tcp_send_syn_data(struct sock *sk, struct sk_buff *syn)
space = __tcp_mtu_to_mss(sk, inet_csk(sk)->icsk_pmtu_cookie) -
MAX_TCP_OPTION_SPACE;
- syn_data = skb_copy_expand(syn, skb_headroom(syn), space,
+ space = min_t(size_t, space, fo->size);
+
+ /* limit to order-0 allocations */
+ space = min_t(size_t, space, SKB_MAX_HEAD(MAX_TCP_HEADER));
+
+ syn_data = skb_copy_expand(syn, MAX_TCP_HEADER, space,
sk->sk_allocation);
if (syn_data == NULL)
goto fallback;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Edward Cree <[email protected]>
commit 8f355e5cee63c2c0c145d8206c4245d0189f47ff upstream.
If we receive a PTP event from the NIC when we haven't set up PTP state
in the driver, we attempt to read through a NULL pointer efx->ptp_data,
triggering a panic.
Signed-off-by: Edward Cree <[email protected]>
Acked-by: Shradha Shah <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/sfc/ptp.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c
index 11d979d..d77016f 100644
--- a/drivers/net/ethernet/sfc/ptp.c
+++ b/drivers/net/ethernet/sfc/ptp.c
@@ -1353,6 +1353,13 @@ void efx_ptp_event(struct efx_nic *efx, efx_qword_t *ev)
struct efx_ptp_data *ptp = efx->ptp_data;
int code = EFX_QWORD_FIELD(*ev, MCDI_EVENT_CODE);
+ if (!ptp) {
+ if (net_ratelimit())
+ netif_warn(efx, drv, efx->net_dev,
+ "Received PTP event but PTP not set up\n");
+ return;
+ }
+
if (!ptp->enabled)
return;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Duan Jiong <[email protected]>
commit feff9ab2e7fa773b6a3965f77375fe89f7fd85cf upstream.
If the neigh table's entries is less than gc_thresh1, the function
will return directly, and the reachabletime will not be recompute,
so the reachabletime can be guessed.
Signed-off-by: Duan Jiong <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/core/neighbour.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 72d71c9..577f36d 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -764,9 +764,6 @@ static void neigh_periodic_work(struct work_struct *work)
nht = rcu_dereference_protected(tbl->nht,
lockdep_is_held(&tbl->lock));
- if (atomic_read(&tbl->entries) < tbl->gc_thresh1)
- goto out;
-
/*
* periodically recompute ReachableTime from random function
*/
@@ -779,6 +776,9 @@ static void neigh_periodic_work(struct work_struct *work)
neigh_rand_reach_time(p->base_reachable_time);
}
+ if (atomic_read(&tbl->entries) < tbl->gc_thresh1)
+ goto out;
+
for (i = 0 ; i < (1 << nht->hash_shift); i++) {
np = &nht->hash_buckets[i];
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "H. Peter Anvin" <[email protected]>
commit 5fa10196bdb5f190f595ebd048490ee52dddea0f upstream.
Don Zickus reports:
A customer generated an external NMI using their iLO to test kdump
worked. Unfortunately, the machine hung. Disabling the nmi_watchdog
made things work.
I speculated the external NMI fired, caused the machine to panic (as
expected) and the perf NMI from the watchdog came in and was latched.
My guess was this somehow caused the hang.
----
It appears that the latched NMI stays latched until the early page
table generation on 64 bits, which causes exceptions to happen which
end in IRET, which re-enable NMI. Therefore, ignore NMIs that come in
during early execution, until we have proper exception handling.
Reported-and-tested-by: Don Zickus <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/kernel/head_32.S | 7 ++++++-
arch/x86/kernel/head_64.S | 6 +++++-
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 5dd87a8..4268023 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -544,6 +544,10 @@ ENDPROC(early_idt_handlers)
/* This is global to keep gas from relaxing the jumps */
ENTRY(early_idt_handler)
cld
+
+ cmpl $X86_TRAP_NMI,(%esp)
+ je is_nmi # Ignore NMI
+
cmpl $2,%ss:early_recursion_flag
je hlt_loop
incl %ss:early_recursion_flag
@@ -594,8 +598,9 @@ ex_entry:
pop %edx
pop %ecx
pop %eax
- addl $8,%esp /* drop vector number and error code */
decl %ss:early_recursion_flag
+is_nmi:
+ addl $8,%esp /* drop vector number and error code */
iret
ENDPROC(early_idt_handler)
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index e1aabdb..33f36c7 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -343,6 +343,9 @@ early_idt_handlers:
ENTRY(early_idt_handler)
cld
+ cmpl $X86_TRAP_NMI,(%rsp)
+ je is_nmi # Ignore NMI
+
cmpl $2,early_recursion_flag(%rip)
jz 1f
incl early_recursion_flag(%rip)
@@ -405,8 +408,9 @@ ENTRY(early_idt_handler)
popq %rdx
popq %rcx
popq %rax
- addq $16,%rsp # drop vector number and error code
decl early_recursion_flag(%rip)
+is_nmi:
+ addq $16,%rsp # drop vector number and error code
INTERRUPT_RETURN
ENDPROC(early_idt_handler)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 01ac8794a77192236a4b91c33adf4177ac5a21f0 upstream.
We need to reorder the driver init sequence to better accomodate
dpm which needs to be loaded earlier in the init sequence. Move
fw init up so that it's available for dpm init.
Signed-off-by: Alex Deucher <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/cik.c | 42 ++++++++++++++++++++------------------
drivers/gpu/drm/radeon/evergreen.c | 33 ++++++++++++++++--------------
drivers/gpu/drm/radeon/ni.c | 36 +++++++++++++++++---------------
drivers/gpu/drm/radeon/r600.c | 16 +++++++--------
drivers/gpu/drm/radeon/rv770.c | 16 +++++++--------
drivers/gpu/drm/radeon/si.c | 18 ++++++++--------
6 files changed, 84 insertions(+), 77 deletions(-)
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index 6796c9d..8748a86 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -6014,26 +6014,7 @@ static int cik_startup(struct radeon_device *rdev)
cik_mc_program(rdev);
- if (rdev->flags & RADEON_IS_IGP) {
- if (!rdev->me_fw || !rdev->pfp_fw || !rdev->ce_fw ||
- !rdev->mec_fw || !rdev->sdma_fw || !rdev->rlc_fw) {
- r = cik_init_microcode(rdev);
- if (r) {
- DRM_ERROR("Failed to load firmware!\n");
- return r;
- }
- }
- } else {
- if (!rdev->me_fw || !rdev->pfp_fw || !rdev->ce_fw ||
- !rdev->mec_fw || !rdev->sdma_fw || !rdev->rlc_fw ||
- !rdev->mc_fw) {
- r = cik_init_microcode(rdev);
- if (r) {
- DRM_ERROR("Failed to load firmware!\n");
- return r;
- }
- }
-
+ if (!(rdev->flags & RADEON_IS_IGP)) {
r = ci_mc_load_microcode(rdev);
if (r) {
DRM_ERROR("Failed to load MC firmware!\n");
@@ -6324,6 +6305,27 @@ int cik_init(struct radeon_device *rdev)
if (r)
return r;
+ if (rdev->flags & RADEON_IS_IGP) {
+ if (!rdev->me_fw || !rdev->pfp_fw || !rdev->ce_fw ||
+ !rdev->mec_fw || !rdev->sdma_fw || !rdev->rlc_fw) {
+ r = cik_init_microcode(rdev);
+ if (r) {
+ DRM_ERROR("Failed to load firmware!\n");
+ return r;
+ }
+ }
+ } else {
+ if (!rdev->me_fw || !rdev->pfp_fw || !rdev->ce_fw ||
+ !rdev->mec_fw || !rdev->sdma_fw || !rdev->rlc_fw ||
+ !rdev->mc_fw) {
+ r = cik_init_microcode(rdev);
+ if (r) {
+ DRM_ERROR("Failed to load firmware!\n");
+ return r;
+ }
+ }
+ }
+
ring = &rdev->ring[RADEON_RING_TYPE_GFX_INDEX];
ring->ring_obj = NULL;
r600_ring_init(rdev, ring, 1024 * 1024);
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 18ae744..dfd2c51 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -5131,26 +5131,11 @@ static int evergreen_startup(struct radeon_device *rdev)
evergreen_mc_program(rdev);
if (ASIC_IS_DCE5(rdev)) {
- if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw || !rdev->mc_fw) {
- r = ni_init_microcode(rdev);
- if (r) {
- DRM_ERROR("Failed to load firmware!\n");
- return r;
- }
- }
r = ni_mc_load_microcode(rdev);
if (r) {
DRM_ERROR("Failed to load MC firmware!\n");
return r;
}
- } else {
- if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
- r = r600_init_microcode(rdev);
- if (r) {
- DRM_ERROR("Failed to load firmware!\n");
- return r;
- }
- }
}
if (rdev->flags & RADEON_IS_AGP) {
@@ -5385,6 +5370,24 @@ int evergreen_init(struct radeon_device *rdev)
if (r)
return r;
+ if (ASIC_IS_DCE5(rdev)) {
+ if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw || !rdev->mc_fw) {
+ r = ni_init_microcode(rdev);
+ if (r) {
+ DRM_ERROR("Failed to load firmware!\n");
+ return r;
+ }
+ }
+ } else {
+ if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
+ r = r600_init_microcode(rdev);
+ if (r) {
+ DRM_ERROR("Failed to load firmware!\n");
+ return r;
+ }
+ }
+ }
+
rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 9a3849d..6dc5752 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -2101,23 +2101,7 @@ static int cayman_startup(struct radeon_device *rdev)
evergreen_mc_program(rdev);
- if (rdev->flags & RADEON_IS_IGP) {
- if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
- r = ni_init_microcode(rdev);
- if (r) {
- DRM_ERROR("Failed to load firmware!\n");
- return r;
- }
- }
- } else {
- if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw || !rdev->mc_fw) {
- r = ni_init_microcode(rdev);
- if (r) {
- DRM_ERROR("Failed to load firmware!\n");
- return r;
- }
- }
-
+ if (!(rdev->flags & RADEON_IS_IGP)) {
r = ni_mc_load_microcode(rdev);
if (r) {
DRM_ERROR("Failed to load MC firmware!\n");
@@ -2366,6 +2350,24 @@ int cayman_init(struct radeon_device *rdev)
if (r)
return r;
+ if (rdev->flags & RADEON_IS_IGP) {
+ if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
+ r = ni_init_microcode(rdev);
+ if (r) {
+ DRM_ERROR("Failed to load firmware!\n");
+ return r;
+ }
+ }
+ } else {
+ if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw || !rdev->mc_fw) {
+ r = ni_init_microcode(rdev);
+ if (r) {
+ DRM_ERROR("Failed to load firmware!\n");
+ return r;
+ }
+ }
+ }
+
ring->ring_obj = NULL;
r600_ring_init(rdev, ring, 1024 * 1024);
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 093afb9..8862411 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -3348,14 +3348,6 @@ static int r600_startup(struct radeon_device *rdev)
r600_mc_program(rdev);
- if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
- r = r600_init_microcode(rdev);
- if (r) {
- DRM_ERROR("Failed to load firmware!\n");
- return r;
- }
- }
-
if (rdev->flags & RADEON_IS_AGP) {
r600_agp_enable(rdev);
} else {
@@ -3549,6 +3541,14 @@ int r600_init(struct radeon_device *rdev)
if (r)
return r;
+ if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
+ r = r600_init_microcode(rdev);
+ if (r) {
+ DRM_ERROR("Failed to load firmware!\n");
+ return r;
+ }
+ }
+
rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 73529c9..33a7531 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -1836,14 +1836,6 @@ static int rv770_startup(struct radeon_device *rdev)
rv770_mc_program(rdev);
- if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
- r = r600_init_microcode(rdev);
- if (r) {
- DRM_ERROR("Failed to load firmware!\n");
- return r;
- }
- }
-
if (rdev->flags & RADEON_IS_AGP) {
rv770_agp_enable(rdev);
} else {
@@ -2054,6 +2046,14 @@ int rv770_init(struct radeon_device *rdev)
if (r)
return r;
+ if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
+ r = r600_init_microcode(rdev);
+ if (r) {
+ DRM_ERROR("Failed to load firmware!\n");
+ return r;
+ }
+ }
+
rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index 966bacc..65d761f 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -6472,15 +6472,6 @@ static int si_startup(struct radeon_device *rdev)
si_mc_program(rdev);
- if (!rdev->me_fw || !rdev->pfp_fw || !rdev->ce_fw ||
- !rdev->rlc_fw || !rdev->mc_fw) {
- r = si_init_microcode(rdev);
- if (r) {
- DRM_ERROR("Failed to load firmware!\n");
- return r;
- }
- }
-
r = si_mc_load_microcode(rdev);
if (r) {
DRM_ERROR("Failed to load MC firmware!\n");
@@ -6736,6 +6727,15 @@ int si_init(struct radeon_device *rdev)
if (r)
return r;
+ if (!rdev->me_fw || !rdev->pfp_fw || !rdev->ce_fw ||
+ !rdev->rlc_fw || !rdev->mc_fw) {
+ r = si_init_microcode(rdev);
+ if (r) {
+ DRM_ERROR("Failed to load firmware!\n");
+ return r;
+ }
+ }
+
ring = &rdev->ring[RADEON_RING_TYPE_GFX_INDEX];
ring->ring_obj = NULL;
r600_ring_init(rdev, ring, 1024 * 1024);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Torvalds <[email protected]>
commit b01d4e68933ec23e43b1046fa35d593cefcf37d1 upstream.
It's an enum, not a #define, you can't use it in asm files.
Introduced in commit 5fa10196bdb5 ("x86: Ignore NMIs that come in during
early boot"), and sadly I didn't compile-test things like I should have
before pushing out.
My weak excuse is that the x86 tree generally doesn't introduce stupid
things like this (and the ARM pull afterwards doesn't cause me to do a
compile-test either, since I don't cross-compile).
Cc: Don Zickus <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/kernel/head_32.S | 2 +-
arch/x86/kernel/head_64.S | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 4268023..f3e6c11 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -545,7 +545,7 @@ ENDPROC(early_idt_handlers)
ENTRY(early_idt_handler)
cld
- cmpl $X86_TRAP_NMI,(%esp)
+ cmpl $2,(%esp) # X86_TRAP_NMI
je is_nmi # Ignore NMI
cmpl $2,%ss:early_recursion_flag
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 33f36c7..a468c0a 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -343,7 +343,7 @@ early_idt_handlers:
ENTRY(early_idt_handler)
cld
- cmpl $X86_TRAP_NMI,(%rsp)
+ cmpl $2,(%rsp) # X86_TRAP_NMI
je is_nmi # Ignore NMI
cmpl $2,early_recursion_flag(%rip)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit d03874c881a049a50e12f285077ab1f9fc2686e1 upstream.
We need to check for DVI vs. HDMI when setting up duallink since
HDMI is single link only. Fixes 4k modes on newer asics.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=75223
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/atombios_encoders.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index 56ed69e..f0d8cb1 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -1297,7 +1297,7 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t
}
if (is_dp)
args.v5.ucLaneNum = dp_lane_count;
- else if (radeon_encoder->pixel_clock > 165000)
+ else if (radeon_dig_monitor_is_duallink(encoder, radeon_encoder->pixel_clock))
args.v5.ucLaneNum = 8;
else
args.v5.ucLaneNum = 4;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Walleij <[email protected]>
commit 052450fdc55894a39fbae93d9bbe43947956f663 upstream.
Due to a problem in the MFD Kconfig it was not possible to
compile the UCB battery driver for the Collie SA1100 system,
in turn making it impossible to compile in the battery driver.
(See patch "mfd: include all drivers in subsystem menu".)
After fixing the MFD Kconfig (separate patch) a compile error
appears in the Collie battery driver due to the <mach/collie.h>
implicitly requiring <mach/hardware.h> through <linux/gpio.h>
via <mach/gpio.h> prior to commit
40ca061b "ARM: 7841/1: sa1100: remove complex GPIO interface".
Fix this up by including the required header into
<mach/collie.h>.
Cc: Andrea Adami <[email protected]>
Cc: Dmitry Eremin-Solenikov <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/mach-sa1100/include/mach/collie.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index f33679d..50e1d85 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -13,6 +13,8 @@
#ifndef __ASM_ARCH_COLLIE_H
#define __ASM_ARCH_COLLIE_H
+#include "hardware.h" /* Gives GPIO_MAX */
+
extern void locomolcd_power(int on);
#define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Anton Blanchard <[email protected]>
commit a5b2cf5b1af424ee3dd9e3ce6d5cea18cb927e67 upstream.
The 64bit relocation code places a few symbols in the text segment.
These symbols are only 4 byte aligned where they need to be 8 byte
aligned. Add an explicit alignment.
Signed-off-by: Anton Blanchard <[email protected]>
Tested-by: Laurent Dufour <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/powerpc/kernel/reloc_64.S | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/kernel/reloc_64.S b/arch/powerpc/kernel/reloc_64.S
index b47a0e1..c712ece 100644
--- a/arch/powerpc/kernel/reloc_64.S
+++ b/arch/powerpc/kernel/reloc_64.S
@@ -81,6 +81,7 @@ _GLOBAL(relocate)
6: blr
+.balign 8
p_dyn: .llong __dynamic_start - 0b
p_rela: .llong __rela_dyn_start - 0b
p_st: .llong _stext - 0b
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Russell King <[email protected]>
commit 006fa2599bf0daf107cbb7a8a99fcfb9a998a169 upstream.
With noMMU, CONFIG_PAGE_OFFSET was not being set correctly. As there's
no MMU, PAGE_OFFSET should be equal to PHYS_OFFSET in all cases. This
commit makes that explicit.
Since we do this, we don't need to mess around in asm/memory.h with
ifdefs to sort this out, so let's get rid of that, and there's no point
offering the "Memory split" option for noMMU as that's meaningless
there.
Fixes: b9b32bf70f2f ("ARM: use linker magic for vectors and vector stubs")
Signed-off-by: Russell King <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/Kconfig | 2 ++
arch/arm/include/asm/memory.h | 9 +++------
2 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 43594d5..170ac09 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1540,6 +1540,7 @@ config MCPM
choice
prompt "Memory split"
+ depends on MMU
default VMSPLIT_3G
help
Select the desired split between kernel and user memory.
@@ -1557,6 +1558,7 @@ endchoice
config PAGE_OFFSET
hex
+ default PHYS_OFFSET if !MMU
default 0x40000000 if VMSPLIT_1G
default 0x80000000 if VMSPLIT_2G
default 0xC0000000
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index e750a93..bcc49dc 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -30,14 +30,15 @@
*/
#define UL(x) _AC(x, UL)
+/* PAGE_OFFSET - the virtual address of the start of the kernel image */
+#define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET)
+
#ifdef CONFIG_MMU
/*
- * PAGE_OFFSET - the virtual address of the start of the kernel image
* TASK_SIZE - the maximum size of a user space task.
* TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
*/
-#define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET)
#define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M))
#define TASK_UNMAPPED_BASE ALIGN(TASK_SIZE / 3, SZ_16M)
@@ -108,10 +109,6 @@
#define END_MEM (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
#endif
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET (PHYS_OFFSET)
-#endif
-
/*
* The module can be at any place in ram in nommu mode.
*/
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Julius Werner <[email protected]>
commit d86db25e53fa69e3e97f3b55dd82a70689787c5d upstream.
The DELAY_INIT quirk only reduces the frequency of enumeration failures
with the Logitech HD Pro C920 and C930e webcams, but does not quite
eliminate them. We have found that adding a delay of 100ms between the
first and second Get Configuration request makes the device enumerate
perfectly reliable even after several weeks of extensive testing. The
reasons for that are anyone's guess, but since the DELAY_INIT quirk
already delays enumeration by a whole second, wating for another 10th of
that isn't really a big deal for the one other device that uses it, and
it will resolve the problems with these webcams.
Signed-off-by: Julius Werner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/core/config.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 548d199..6524383 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -718,6 +718,10 @@ int usb_get_configuration(struct usb_device *dev)
result = -ENOMEM;
goto err;
}
+
+ if (dev->quirks & USB_QUIRK_DELAY_INIT)
+ msleep(100);
+
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
bigbuffer, length);
if (result < 0) {
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Neuling <[email protected]>
commit 621b5060e823301d0cba4cb52a7ee3491922d291 upstream.
When we fork/clone we currently don't copy any of the TM state to the new
thread. This results in a TM bad thing (program check) when the new process is
switched in as the kernel does a tmrechkpt with TEXASR FS not set. Also, since
R1 is from userspace, we trigger the bad kernel stack pointer detection. So we
end up with something like this:
Bad kernel stack pointer 0 at c0000000000404fc
cpu 0x2: Vector: 700 (Program Check) at [c00000003ffefd40]
pc: c0000000000404fc: restore_gprs+0xc0/0x148
lr: 0000000000000000
sp: 0
msr: 9000000100201030
current = 0xc000001dd1417c30
paca = 0xc00000000fe00800 softe: 0 irq_happened: 0x01
pid = 0, comm = swapper/2
WARNING: exception is not recoverable, can't continue
The below fixes this by flushing the TM state before we copy the task_struct to
the clone. To do this we go through the tmreclaim patch, which removes the
checkpointed registers from the CPU and transitions the CPU out of TM suspend
mode. Hence we need to call tmrechkpt after to restore the checkpointed state
and the TM mode for the current task.
To make this fail from userspace is simply:
tbegin
li r0, 2
sc
<boom>
Kudos to Adhemerval Zanella Neto for finding this.
Signed-off-by: Michael Neuling <[email protected]>
cc: Adhemerval Zanella Neto <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/powerpc/kernel/process.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 8083be2..273e9ab 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -926,6 +926,15 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
flush_altivec_to_thread(src);
flush_vsx_to_thread(src);
flush_spe_to_thread(src);
+ /*
+ * Flush TM state out so we can copy it. __switch_to_tm() does this
+ * flush but it removes the checkpointed state from the current CPU and
+ * transitions the CPU out of TM mode. Hence we need to call
+ * tm_recheckpoint_new_task() (on the same task) to restore the
+ * checkpointed state back and the TM mode.
+ */
+ __switch_to_tm(src);
+ tm_recheckpoint_new_task(src);
*dst = *src;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Julius Werner <[email protected]>
commit e0429362ab15c46ea4d64c3f8c9e0933e48a143a upstream.
We've encountered a rare issue when enumerating two Logitech webcams
after a reboot that doesn't power cycle the USB ports. They are spewing
random data (possibly some leftover UVC buffers) on the second
(full-sized) Get Configuration request of the enumeration phase. Since
the data is random this can potentially cause all kinds of odd behavior,
and since it occasionally happens multiple times (after the kernel
issues another reset due to the garbled configuration descriptor), it is
not always recoverable. Set the USB_DELAY_INIT quirk that seems to work
around the issue.
Signed-off-by: Julius Werner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/core/quirks.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 01fe362..1053eb6 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -46,6 +46,10 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Microsoft LifeCam-VX700 v2.0 */
{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech HD Pro Webcams C920 and C930e */
+ { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
+ { USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT },
+
/* Logitech Quickcam Fusion */
{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Tejun Heo <[email protected]>
commit 70044d71d31d6973665ced5be04ef39ac1c09a48 upstream.
PREPARE_[DELAYED_]WORK() are being phased out. They have few users
and a nasty surprise in terms of reentrancy guarantee as workqueue
considers work items to be different if they don't have the same work
function.
firewire core-device and sbp2 have been been multiplexing work items
with multiple work functions. Introduce fw_device_workfn() and
sbp2_lu_workfn() which invoke fw_device->workfn and
sbp2_logical_unit->workfn respectively and always use the two
functions as the work functions and update the users to set the
->workfn fields instead of overriding work functions using
PREPARE_DELAYED_WORK().
This fixes a variety of possible regressions since a2c1c57be8d9
"workqueue: consider work function when searching for busy work items"
due to which fw_workqueue lost its required non-reentrancy property.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Stefan Richter <[email protected]>
Cc: [email protected]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/firewire/core-device.c | 22 +++++++++++++++-------
drivers/firewire/sbp2.c | 17 +++++++++++++----
include/linux/firewire.h | 1 +
3 files changed, 29 insertions(+), 11 deletions(-)
diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c
index de4aa40..2c6d5e1 100644
--- a/drivers/firewire/core-device.c
+++ b/drivers/firewire/core-device.c
@@ -916,7 +916,7 @@ static int lookup_existing_device(struct device *dev, void *data)
old->config_rom_retries = 0;
fw_notice(card, "rediscovered device %s\n", dev_name(dev));
- PREPARE_DELAYED_WORK(&old->work, fw_device_update);
+ old->workfn = fw_device_update;
fw_schedule_device_work(old, 0);
if (current_node == card->root_node)
@@ -1075,7 +1075,7 @@ static void fw_device_init(struct work_struct *work)
if (atomic_cmpxchg(&device->state,
FW_DEVICE_INITIALIZING,
FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
- PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+ device->workfn = fw_device_shutdown;
fw_schedule_device_work(device, SHUTDOWN_DELAY);
} else {
fw_notice(card, "created device %s: GUID %08x%08x, S%d00\n",
@@ -1196,13 +1196,20 @@ static void fw_device_refresh(struct work_struct *work)
dev_name(&device->device), fw_rcode_string(ret));
gone:
atomic_set(&device->state, FW_DEVICE_GONE);
- PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+ device->workfn = fw_device_shutdown;
fw_schedule_device_work(device, SHUTDOWN_DELAY);
out:
if (node_id == card->root_node->node_id)
fw_schedule_bm_work(card, 0);
}
+static void fw_device_workfn(struct work_struct *work)
+{
+ struct fw_device *device = container_of(to_delayed_work(work),
+ struct fw_device, work);
+ device->workfn(work);
+}
+
void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
{
struct fw_device *device;
@@ -1252,7 +1259,8 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
* power-up after getting plugged in. We schedule the
* first config rom scan half a second after bus reset.
*/
- INIT_DELAYED_WORK(&device->work, fw_device_init);
+ device->workfn = fw_device_init;
+ INIT_DELAYED_WORK(&device->work, fw_device_workfn);
fw_schedule_device_work(device, INITIAL_DELAY);
break;
@@ -1268,7 +1276,7 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
if (atomic_cmpxchg(&device->state,
FW_DEVICE_RUNNING,
FW_DEVICE_INITIALIZING) == FW_DEVICE_RUNNING) {
- PREPARE_DELAYED_WORK(&device->work, fw_device_refresh);
+ device->workfn = fw_device_refresh;
fw_schedule_device_work(device,
device->is_local ? 0 : INITIAL_DELAY);
}
@@ -1283,7 +1291,7 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
smp_wmb(); /* update node_id before generation */
device->generation = card->generation;
if (atomic_read(&device->state) == FW_DEVICE_RUNNING) {
- PREPARE_DELAYED_WORK(&device->work, fw_device_update);
+ device->workfn = fw_device_update;
fw_schedule_device_work(device, 0);
}
break;
@@ -1308,7 +1316,7 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
device = node->data;
if (atomic_xchg(&device->state,
FW_DEVICE_GONE) == FW_DEVICE_RUNNING) {
- PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+ device->workfn = fw_device_shutdown;
fw_schedule_device_work(device,
list_empty(&card->link) ? 0 : SHUTDOWN_DELAY);
}
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 281029d..7aef911 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -146,6 +146,7 @@ struct sbp2_logical_unit {
*/
int generation;
int retries;
+ work_func_t workfn;
struct delayed_work work;
bool has_sdev;
bool blocked;
@@ -864,7 +865,7 @@ static void sbp2_login(struct work_struct *work)
/* set appropriate retry limit(s) in BUSY_TIMEOUT register */
sbp2_set_busy_timeout(lu);
- PREPARE_DELAYED_WORK(&lu->work, sbp2_reconnect);
+ lu->workfn = sbp2_reconnect;
sbp2_agent_reset(lu);
/* This was a re-login. */
@@ -918,7 +919,7 @@ static void sbp2_login(struct work_struct *work)
* If a bus reset happened, sbp2_update will have requeued
* lu->work already. Reset the work from reconnect to login.
*/
- PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
+ lu->workfn = sbp2_login;
}
static void sbp2_reconnect(struct work_struct *work)
@@ -952,7 +953,7 @@ static void sbp2_reconnect(struct work_struct *work)
lu->retries++ >= 5) {
dev_err(tgt_dev(tgt), "failed to reconnect\n");
lu->retries = 0;
- PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
+ lu->workfn = sbp2_login;
}
sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
@@ -972,6 +973,13 @@ static void sbp2_reconnect(struct work_struct *work)
sbp2_conditionally_unblock(lu);
}
+static void sbp2_lu_workfn(struct work_struct *work)
+{
+ struct sbp2_logical_unit *lu = container_of(to_delayed_work(work),
+ struct sbp2_logical_unit, work);
+ lu->workfn(work);
+}
+
static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry)
{
struct sbp2_logical_unit *lu;
@@ -998,7 +1006,8 @@ static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry)
lu->blocked = false;
++tgt->dont_block;
INIT_LIST_HEAD(&lu->orb_list);
- INIT_DELAYED_WORK(&lu->work, sbp2_login);
+ lu->workfn = sbp2_login;
+ INIT_DELAYED_WORK(&lu->work, sbp2_lu_workfn);
list_add_tail(&lu->link, &tgt->lu_list);
return 0;
diff --git a/include/linux/firewire.h b/include/linux/firewire.h
index 5d7782e..c3683bd 100644
--- a/include/linux/firewire.h
+++ b/include/linux/firewire.h
@@ -200,6 +200,7 @@ struct fw_device {
unsigned irmc:1;
unsigned bc_implemented:2;
+ work_func_t workfn;
struct delayed_work work;
struct fw_attribute_group attribute_group;
};
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Michele Baldessari <[email protected]>
commit b28a613e9138e4b3a64649bd60b13436f4b4b49b upstream.
Via commit 87809942d3fa "libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk
for Seagate Momentus SpinPoint M8" we added a quirk for disks named
"ST1000LM024 HN-M101MBB" with firmware revision "2AR10001".
As reported on https://bugzilla.redhat.com/show_bug.cgi?id=1073901,
we need to also add firmware revision 2BA30001 as it is broken as well.
Reported-by: Nicholas <[email protected]>
Signed-off-by: Michele Baldessari <[email protected]>
Tested-by: Guilherme Amadio <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/ata/libata-core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 71e85c2..ac04311 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4152,6 +4152,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
/* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */
{ "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA },
+ { "ST1000LM024 HN-M101MBB", "2BA30001", ATA_HORKAGE_BROKEN_FPDMA_AA },
/* Blacklist entries taken from Silicon Image 3124/3132
Windows driver .inf file - also several Linux problem reports */
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Lauri Kasanen <[email protected]>
commit 14eedc32a3c0ec9dd70448a73763ee21feae3111 upstream.
Without this, a bo may get created in the cpu-inaccessible vram.
Before the CP engines get setup, all copies are done via cpu memcpy.
This means that the cpu tries to read from inaccessible memory, fails,
and the radeon module proceeds to disable acceleration.
Doing this has no downsides, as the real VRAM size gets set as soon as the
CP engines get init.
This is a candidate for 3.14 fixes.
v2: Add comment on why the function is used
Signed-off-by: Lauri Kasanen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/radeon_ttm.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 6c0ce89..d644f60 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -710,6 +710,9 @@ int radeon_ttm_init(struct radeon_device *rdev)
DRM_ERROR("Failed initializing VRAM heap.\n");
return r;
}
+ /* Change the size here instead of the init above so only lpfn is affected */
+ radeon_ttm_set_active_vram_size(rdev, rdev->mc.visible_vram_size);
+
r = radeon_bo_create(rdev, 256 * 1024, PAGE_SIZE, true,
RADEON_GEM_DOMAIN_VRAM,
NULL, &rdev->stollen_vga_memory);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 13714323f83ffa5a772fe0d8b74e0fa32ee08819 upstream.
Should be at 0x8 rather than 0.
fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=60523
Noticed by ArtForz on #radeon
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/evergreen_smc.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/radeon/evergreen_smc.h b/drivers/gpu/drm/radeon/evergreen_smc.h
index 76ada8c..3a03ba3 100644
--- a/drivers/gpu/drm/radeon/evergreen_smc.h
+++ b/drivers/gpu/drm/radeon/evergreen_smc.h
@@ -57,7 +57,7 @@ typedef struct SMC_Evergreen_MCRegisters SMC_Evergreen_MCRegisters;
#define EVERGREEN_SMC_FIRMWARE_HEADER_LOCATION 0x100
-#define EVERGREEN_SMC_FIRMWARE_HEADER_softRegisters 0x0
+#define EVERGREEN_SMC_FIRMWARE_HEADER_softRegisters 0x8
#define EVERGREEN_SMC_FIRMWARE_HEADER_stateTable 0xC
#define EVERGREEN_SMC_FIRMWARE_HEADER_mcRegisterTable 0x20
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit e1253be0ece1a95a02c7f5843194877471af8179 upstream.
When nfs4_set_rw_stateid() can fails by returning EIO to indicate that
the stateid is completely invalid, then it makes no sense to have it
trigger a retry of the READ or WRITE operation. Instead, we should just
have it fall through and attempt a recovery.
This fixes an infinite loop in which the client keeps replaying the same
bad stateid back to the server.
Reported-by: Andy Adamson <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/nfs/nfs4proc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 64dd7c6..7690917 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3825,8 +3825,9 @@ static bool nfs4_stateid_is_current(nfs4_stateid *stateid,
{
nfs4_stateid current_stateid;
- if (nfs4_set_rw_stateid(¤t_stateid, ctx, l_ctx, fmode))
- return false;
+ /* If the current stateid represents a lost lock, then exit */
+ if (nfs4_set_rw_stateid(¤t_stateid, ctx, l_ctx, fmode) == -EIO)
+ return true;
return nfs4_stateid_match(stateid, ¤t_stateid);
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Richter <[email protected]>
commit 0dbe15f88be5b2cdf4ca4145797861dfb0d583a5 upstream.
a) Sort device IDs by vendor -- device -- revision.
b) Write quirk flags in hexadecimal. This affects the user-visible
output of "modinfo firewire-ohci". Since more flags have been added
recently, it is now easier to cope with them in hexadecimal represen-
tation. Besides, the device-specific combination of quirk flags is
shown in hexadecimal in the kernel log too. (And firewire-sbp2
presents its own quirk flags in modinfo as hexadecimals as well.)
Signed-off-by: Stefan Richter <[email protected]>
[ luis: 3.11.y prereq for:
0ca4934 "firewire: ohci: fix probe failure with Agere/LSI controllers" ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/firewire/ohci.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index afb701e..66a63b4 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -271,6 +271,7 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card)
static char ohci_driver_name[] = KBUILD_MODNAME;
+#define PCI_VENDOR_ID_PINNACLE_SYSTEMS 0x11bd
#define PCI_DEVICE_ID_AGERE_FW643 0x5901
#define PCI_DEVICE_ID_CREATIVE_SB1394 0x4001
#define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380
@@ -278,17 +279,16 @@ static char ohci_driver_name[] = KBUILD_MODNAME;
#define PCI_DEVICE_ID_TI_TSB12LV26 0x8020
#define PCI_DEVICE_ID_TI_TSB82AA2 0x8025
#define PCI_DEVICE_ID_VIA_VT630X 0x3044
-#define PCI_VENDOR_ID_PINNACLE_SYSTEMS 0x11bd
#define PCI_REV_ID_VIA_VT6306 0x46
-#define QUIRK_CYCLE_TIMER 1
-#define QUIRK_RESET_PACKET 2
-#define QUIRK_BE_HEADERS 4
-#define QUIRK_NO_1394A 8
-#define QUIRK_NO_MSI 16
-#define QUIRK_TI_SLLZ059 32
-#define QUIRK_IR_WAKE 64
-#define QUIRK_PHY_LCTRL_TIMEOUT 128
+#define QUIRK_CYCLE_TIMER 0x1
+#define QUIRK_RESET_PACKET 0x2
+#define QUIRK_BE_HEADERS 0x4
+#define QUIRK_NO_1394A 0x8
+#define QUIRK_NO_MSI 0x10
+#define QUIRK_TI_SLLZ059 0x20
+#define QUIRK_IR_WAKE 0x40
+#define QUIRK_PHY_LCTRL_TIMEOUT 0x80
/* In case of multiple matches in ohci_quirks[], only the first one is used. */
static const struct {
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Sachin Kamat <[email protected]>
commit 6cef74970186797c45b3add1e73a14aa71d338d1 upstream.
__initdata should be placed between the variable name and equal
sign for the variable to be placed in the intended section.
Signed-off-by: Sachin Kamat <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/acpi/ec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 1ad5a4f..c69ac14 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -949,7 +949,7 @@ static int ec_enlarge_storm_threshold(const struct dmi_system_id *id)
return 0;
}
-static struct dmi_system_id __initdata ec_dmi_table[] = {
+static struct dmi_system_id ec_dmi_table[] __initdata = {
{
ec_skip_dsdt_scan, "Compal JFL92", {
DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit 5159d763f60af693a3fcec45dce2021f66e528a4 upstream.
There are a handful of uses of list_empty() for cmd->i_conn_node
within iser-target code that expect to return false once a cmd
has been removed from the per connect list.
This patch changes all uses of list_del -> list_del_init in order
to ensure that list_empty() returns false as expected.
Acked-by: Sagi Grimberg <[email protected]>
Cc: Or Gerlitz <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/infiniband/ulp/isert/ib_isert.c | 6 +++---
drivers/target/iscsi/iscsi_target.c | 6 +++---
drivers/target/iscsi/iscsi_target_erl2.c | 16 ++++++++--------
3 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
index e0a95b8..58968e7 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -1278,7 +1278,7 @@ isert_put_cmd(struct isert_cmd *isert_cmd)
case ISCSI_OP_SCSI_CMD:
spin_lock_bh(&conn->cmd_lock);
if (!list_empty(&cmd->i_conn_node))
- list_del(&cmd->i_conn_node);
+ list_del_init(&cmd->i_conn_node);
spin_unlock_bh(&conn->cmd_lock);
if (cmd->data_direction == DMA_TO_DEVICE)
@@ -1290,7 +1290,7 @@ isert_put_cmd(struct isert_cmd *isert_cmd)
case ISCSI_OP_SCSI_TMFUNC:
spin_lock_bh(&conn->cmd_lock);
if (!list_empty(&cmd->i_conn_node))
- list_del(&cmd->i_conn_node);
+ list_del_init(&cmd->i_conn_node);
spin_unlock_bh(&conn->cmd_lock);
transport_generic_free_cmd(&cmd->se_cmd, 0);
@@ -1300,7 +1300,7 @@ isert_put_cmd(struct isert_cmd *isert_cmd)
case ISCSI_OP_TEXT:
spin_lock_bh(&conn->cmd_lock);
if (!list_empty(&cmd->i_conn_node))
- list_del(&cmd->i_conn_node);
+ list_del_init(&cmd->i_conn_node);
spin_unlock_bh(&conn->cmd_lock);
/*
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index f6de529..832e08f 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -797,7 +797,7 @@ static void iscsit_ack_from_expstatsn(struct iscsi_conn *conn, u32 exp_statsn)
spin_unlock_bh(&conn->cmd_lock);
list_for_each_entry_safe(cmd, cmd_p, &ack_list, i_conn_node) {
- list_del(&cmd->i_conn_node);
+ list_del_init(&cmd->i_conn_node);
iscsit_free_cmd(cmd, false);
}
}
@@ -3718,7 +3718,7 @@ iscsit_immediate_queue(struct iscsi_conn *conn, struct iscsi_cmd *cmd, int state
break;
case ISTATE_REMOVE:
spin_lock_bh(&conn->cmd_lock);
- list_del(&cmd->i_conn_node);
+ list_del_init(&cmd->i_conn_node);
spin_unlock_bh(&conn->cmd_lock);
iscsit_free_cmd(cmd, false);
@@ -4163,7 +4163,7 @@ static void iscsit_release_commands_from_conn(struct iscsi_conn *conn)
spin_lock_bh(&conn->cmd_lock);
list_for_each_entry_safe(cmd, cmd_tmp, &conn->conn_cmd_list, i_conn_node) {
- list_del(&cmd->i_conn_node);
+ list_del_init(&cmd->i_conn_node);
spin_unlock_bh(&conn->cmd_lock);
iscsit_increment_maxcmdsn(cmd, sess);
diff --git a/drivers/target/iscsi/iscsi_target_erl2.c b/drivers/target/iscsi/iscsi_target_erl2.c
index 45a5afd..0d2d013 100644
--- a/drivers/target/iscsi/iscsi_target_erl2.c
+++ b/drivers/target/iscsi/iscsi_target_erl2.c
@@ -140,7 +140,7 @@ void iscsit_free_connection_recovery_entires(struct iscsi_session *sess)
list_for_each_entry_safe(cmd, cmd_tmp,
&cr->conn_recovery_cmd_list, i_conn_node) {
- list_del(&cmd->i_conn_node);
+ list_del_init(&cmd->i_conn_node);
cmd->conn = NULL;
spin_unlock(&cr->conn_recovery_cmd_lock);
iscsit_free_cmd(cmd, true);
@@ -162,7 +162,7 @@ void iscsit_free_connection_recovery_entires(struct iscsi_session *sess)
list_for_each_entry_safe(cmd, cmd_tmp,
&cr->conn_recovery_cmd_list, i_conn_node) {
- list_del(&cmd->i_conn_node);
+ list_del_init(&cmd->i_conn_node);
cmd->conn = NULL;
spin_unlock(&cr->conn_recovery_cmd_lock);
iscsit_free_cmd(cmd, true);
@@ -218,7 +218,7 @@ int iscsit_remove_cmd_from_connection_recovery(
}
cr = cmd->cr;
- list_del(&cmd->i_conn_node);
+ list_del_init(&cmd->i_conn_node);
return --cr->cmd_count;
}
@@ -299,7 +299,7 @@ int iscsit_discard_unacknowledged_ooo_cmdsns_for_conn(struct iscsi_conn *conn)
if (!(cmd->cmd_flags & ICF_OOO_CMDSN))
continue;
- list_del(&cmd->i_conn_node);
+ list_del_init(&cmd->i_conn_node);
spin_unlock_bh(&conn->cmd_lock);
iscsit_free_cmd(cmd, true);
@@ -337,7 +337,7 @@ int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn)
/*
* Only perform connection recovery on ISCSI_OP_SCSI_CMD or
* ISCSI_OP_NOOP_OUT opcodes. For all other opcodes call
- * list_del(&cmd->i_conn_node); to release the command to the
+ * list_del_init(&cmd->i_conn_node); to release the command to the
* session pool and remove it from the connection's list.
*
* Also stop the DataOUT timer, which will be restarted after
@@ -353,7 +353,7 @@ int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn)
" CID: %hu\n", cmd->iscsi_opcode,
cmd->init_task_tag, cmd->cmd_sn, conn->cid);
- list_del(&cmd->i_conn_node);
+ list_del_init(&cmd->i_conn_node);
spin_unlock_bh(&conn->cmd_lock);
iscsit_free_cmd(cmd, true);
spin_lock_bh(&conn->cmd_lock);
@@ -373,7 +373,7 @@ int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn)
*/
if (!(cmd->cmd_flags & ICF_OOO_CMDSN) && !cmd->immediate_cmd &&
iscsi_sna_gte(cmd->cmd_sn, conn->sess->exp_cmd_sn)) {
- list_del(&cmd->i_conn_node);
+ list_del_init(&cmd->i_conn_node);
spin_unlock_bh(&conn->cmd_lock);
iscsit_free_cmd(cmd, true);
spin_lock_bh(&conn->cmd_lock);
@@ -395,7 +395,7 @@ int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn)
cmd->sess = conn->sess;
- list_del(&cmd->i_conn_node);
+ list_del_init(&cmd->i_conn_node);
spin_unlock_bh(&conn->cmd_lock);
iscsit_free_all_datain_reqs(cmd);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit e805ca8b0a9b6c91099c0eaa4b160a1196a4ae25 upstream.
Logitech C500 (046d:0807) needs the same workaround like other
Logitech Webcams.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/usb/mixer.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 95558ef..be4db47 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -883,6 +883,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval,
}
break;
+ case USB_ID(0x046d, 0x0807): /* Logitech Webcam C500 */
case USB_ID(0x046d, 0x0808):
case USB_ID(0x046d, 0x0809):
case USB_ID(0x046d, 0x081b): /* HD Webcam c310 */
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Vlastimil Babka <[email protected]>
commit 9050d7eba40b3d79551668f54e68fd6f51945ef3 upstream.
Daniel Borkmann reported a VM_BUG_ON assertion failing:
------------[ cut here ]------------
kernel BUG at mm/mlock.c:528!
invalid opcode: 0000 [#1] SMP
Modules linked in: ccm arc4 iwldvm [...]
video
CPU: 3 PID: 2266 Comm: netsniff-ng Not tainted 3.14.0-rc2+ #8
Hardware name: LENOVO 2429BP3/2429BP3, BIOS G4ET37WW (1.12 ) 05/29/2012
task: ffff8801f87f9820 ti: ffff88002cb44000 task.ti: ffff88002cb44000
RIP: 0010:[<ffffffff81171ad0>] [<ffffffff81171ad0>] munlock_vma_pages_range+0x2e0/0x2f0
Call Trace:
do_munmap+0x18f/0x3b0
vm_munmap+0x41/0x60
SyS_munmap+0x22/0x30
system_call_fastpath+0x1a/0x1f
RIP munlock_vma_pages_range+0x2e0/0x2f0
---[ end trace a0088dcf07ae10f2 ]---
because munlock_vma_pages_range() thinks it's unexpectedly in the middle
of a THP page. This can be reproduced with default config since 3.11
kernels. A reproducer can be found in the kernel's selftest directory
for networking by running ./psock_tpacket.
The problem is that an order=2 compound page (allocated by
alloc_one_pg_vec_page() is part of the munlocked VM_MIXEDMAP vma (mapped
by packet_mmap()) and mistaken for a THP page and assumed to be order=9.
The checks for THP in munlock came with commit ff6a6da60b89 ("mm:
accelerate munlock() treatment of THP pages"), i.e. since 3.9, but did
not trigger a bug. It just makes munlock_vma_pages_range() skip such
compound pages until the next 512-pages-aligned page, when it encounters
a head page. This is however not a problem for vma's where mlocking has
no effect anyway, but it can distort the accounting.
Since commit 7225522bb429 ("mm: munlock: batch non-THP page isolation
and munlock+putback using pagevec") this can trigger a VM_BUG_ON in
PageTransHuge() check.
This patch fixes the issue by adding VM_MIXEDMAP flag to VM_SPECIAL, a
list of flags that make vma's non-mlockable and non-mergeable. The
reasoning is that VM_MIXEDMAP vma's are similar to VM_PFNMAP, which is
already on the VM_SPECIAL list, and both are intended for non-LRU pages
where mlocking makes no sense anyway. Related Lkml discussion can be
found in [2].
[1] tools/testing/selftests/net/psock_tpacket
[2] https://lkml.org/lkml/2014/1/10/427
Signed-off-by: Vlastimil Babka <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reported-by: Daniel Borkmann <[email protected]>
Tested-by: Daniel Borkmann <[email protected]>
Cc: Thomas Hellstrom <[email protected]>
Cc: John David Anglin <[email protected]>
Cc: HATAYAMA Daisuke <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Carsten Otte <[email protected]>
Cc: Jared Hulbert <[email protected]>
Tested-by: Hannes Frederic Sowa <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Acked-by: Rik van Riel <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
include/linux/mm.h | 2 +-
mm/huge_memory.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/mm.h b/include/linux/mm.h
index a6154b1..e99f9fb 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -155,7 +155,7 @@ extern unsigned int kobjsize(const void *objp);
* Special vmas that are non-mergable, non-mlock()able.
* Note: mm/huge_memory.c VM_NO_THP depends on this definition.
*/
-#define VM_SPECIAL (VM_IO | VM_DONTEXPAND | VM_PFNMAP)
+#define VM_SPECIAL (VM_IO | VM_DONTEXPAND | VM_PFNMAP | VM_MIXEDMAP)
/*
* mapping from the currently active vm_flags protection bits (the
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 46a02bf..2eb6e38 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1919,7 +1919,7 @@ out:
return ret;
}
-#define VM_NO_THP (VM_SPECIAL|VM_MIXEDMAP|VM_HUGETLB|VM_SHARED|VM_MAYSHARE)
+#define VM_NO_THP (VM_SPECIAL | VM_HUGETLB | VM_SHARED | VM_MAYSHARE)
int hugepage_madvise(struct vm_area_struct *vma,
unsigned long *vm_flags, int advice)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Chen-Yu Tsai <[email protected]>
commit 905a5117e79367b7e58ae046d12ca9961f048c89 upstream.
On tha Allwinner A20 SoC, the external interrupts on the pin controller
device are connected to the GIC. Without chained_irq_{enter, exit},
external GPIO interrupts, such as used by mmc core card detect, cause
the system to hang.
This issue was first encountered during my attempt to get out-of-band
interrupts for WiFi on the Cubietruck working. With David's new series
of sunci-mci using mmc slot-gpio for (GPIO interrupt based) card
detection, removing the SD card also causes my Cubietruck to hang. This
problem should extend to all Allwinner A20 based boards.
With this fix, the system no longer hangs when I remove or insert the
SD card. /proc/interrupts show that the interrupt has correctly fired.
However the system still does not detect card removal/insertion. I
believe this is another unrelated issue.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/pinctrl/pinctrl-sunxi.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c
index 0d9a1cf..95d3e7b 100644
--- a/drivers/pinctrl/pinctrl-sunxi.c
+++ b/drivers/pinctrl/pinctrl-sunxi.c
@@ -14,6 +14,7 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -668,6 +669,7 @@ static struct irq_chip sunxi_pinctrl_irq_chip = {
static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
{
+ struct irq_chip *chip = irq_get_chip(irq);
struct sunxi_pinctrl *pctl = irq_get_handler_data(irq);
const unsigned long reg = readl(pctl->membase + IRQ_STATUS_REG);
@@ -677,10 +679,12 @@ static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
if (reg) {
int irqoffset;
+ chained_irq_enter(chip, desc);
for_each_set_bit(irqoffset, ®, SUNXI_IRQ_NUMBER) {
int pin_irq = irq_find_mapping(pctl->domain, irqoffset);
generic_handle_irq(pin_irq);
}
+ chained_irq_exit(chip, desc);
}
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit c5eda4c1bf6214332c46fb2f4e7c42a85e5e5643 upstream.
The mixer widget (NID 0x20) of AD1884 and AD1984 codecs isn't
connected directly to the actual I/O paths but only via another mixer
widget (NID 0x21). We need a similar fix as we did for AD1882.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/pci/hda/patch_analog.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 3d8e567..570bce0 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3697,6 +3697,7 @@ static int ad1884_parse_auto_config(struct hda_codec *codec)
spec = codec->spec;
spec->gen.mixer_nid = 0x20;
+ spec->gen.mixer_merge_nid = 0x21;
spec->gen.beep_nid = 0x10;
set_beep_amp(spec, 0x10, 0, HDA_OUTPUT);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit 15c34a760630ca2c803848fba90ca0646a9907dd upstream.
Global quota files are accessed from different nodes. Thus we cannot
cache offset of quota structure in the quota file after we drop our node
reference count to it because after that moment quota structure may be
freed and reallocated elsewhere by a different node resulting in
corruption of quota file.
Fix the problem by clearing dq_off when we are releasing dquot structure.
We also remove the DB_READ_B handling because it is useless -
DQ_ACTIVE_B is set iff DQ_READ_B is set.
Signed-off-by: Jan Kara <[email protected]>
Cc: Goldwyn Rodrigues <[email protected]>
Cc: Joel Becker <[email protected]>
Reviewed-by: Mark Fasheh <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/ocfs2/quota_global.c | 27 +++++++++++++++++----------
fs/ocfs2/quota_local.c | 4 ----
2 files changed, 17 insertions(+), 14 deletions(-)
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 332a281..e49b4f1 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -717,6 +717,12 @@ static int ocfs2_release_dquot(struct dquot *dquot)
*/
if (status < 0)
mlog_errno(status);
+ /*
+ * Clear dq_off so that we search for the structure in quota file next
+ * time we acquire it. The structure might be deleted and reallocated
+ * elsewhere by another node while our dquot structure is on freelist.
+ */
+ dquot->dq_off = 0;
clear_bit(DQ_ACTIVE_B, &dquot->dq_flags);
out_trans:
ocfs2_commit_trans(osb, handle);
@@ -756,16 +762,17 @@ static int ocfs2_acquire_dquot(struct dquot *dquot)
status = ocfs2_lock_global_qf(info, 1);
if (status < 0)
goto out;
- if (!test_bit(DQ_READ_B, &dquot->dq_flags)) {
- status = ocfs2_qinfo_lock(info, 0);
- if (status < 0)
- goto out_dq;
- status = qtree_read_dquot(&info->dqi_gi, dquot);
- ocfs2_qinfo_unlock(info, 0);
- if (status < 0)
- goto out_dq;
- }
- set_bit(DQ_READ_B, &dquot->dq_flags);
+ status = ocfs2_qinfo_lock(info, 0);
+ if (status < 0)
+ goto out_dq;
+ /*
+ * We always want to read dquot structure from disk because we don't
+ * know what happened with it while it was on freelist.
+ */
+ status = qtree_read_dquot(&info->dqi_gi, dquot);
+ ocfs2_qinfo_unlock(info, 0);
+ if (status < 0)
+ goto out_dq;
OCFS2_DQUOT(dquot)->dq_use_count++;
OCFS2_DQUOT(dquot)->dq_origspace = dquot->dq_dqb.dqb_curspace;
diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index 27fe7ee..d0f323d 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -1303,10 +1303,6 @@ int ocfs2_local_release_dquot(handle_t *handle, struct dquot *dquot)
ocfs2_journal_dirty(handle, od->dq_chunk->qc_headerbh);
out:
- /* Clear the read bit so that next time someone uses this
- * dquot he reads fresh info from disk and allocates local
- * dquot structure */
- clear_bit(DQ_READ_B, &dquot->dq_flags);
return status;
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexandre Bounine <[email protected]>
commit 04379dffdd4da820d51a1566ad2e86f3b1ad97ed upstream.
This patch is a modification of the patch originally proposed by
Xiaotian Feng <[email protected]>: https://lkml.org/lkml/2012/11/5/413
This new version disables DMA channel interrupts and ensures that the
tasklet wil not be scheduled again before calling tasklet_kill().
Unfortunately the updated patch was not released at that time due to
planned rework of Tsi721 mport driver to use threaded interrupts (which
has yet to happen). Recently the issue was reported again:
https://lkml.org/lkml/2014/2/19/762.
Description from the original Xiaotian's patch:
"Some drivers use tasklet_disable in device remove/release process,
tasklet_disable will inc tasklet->count and return. If the tasklet is
not handled yet under some softirq pressure, the tasklet will be
placed on the tasklet_vec, never have a chance to be excuted. This
might lead to a heavy loaded ksoftirqd, wakeup with pending_softirq,
but tasklet is disabled. tasklet_kill should be used in this case."
This patch is applicable to kernel versions starting from v3.5.
Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Xiaotian Feng <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Cc: Mike Galbraith <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/rapidio/devices/tsi721.h | 1 +
drivers/rapidio/devices/tsi721_dma.c | 27 ++++++++++++++++++---------
2 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/rapidio/devices/tsi721.h b/drivers/rapidio/devices/tsi721.h
index b4b0d83..7061ac0 100644
--- a/drivers/rapidio/devices/tsi721.h
+++ b/drivers/rapidio/devices/tsi721.h
@@ -678,6 +678,7 @@ struct tsi721_bdma_chan {
struct list_head free_list;
dma_cookie_t completed_cookie;
struct tasklet_struct tasklet;
+ bool active;
};
#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
diff --git a/drivers/rapidio/devices/tsi721_dma.c b/drivers/rapidio/devices/tsi721_dma.c
index 502663f..91245f5 100644
--- a/drivers/rapidio/devices/tsi721_dma.c
+++ b/drivers/rapidio/devices/tsi721_dma.c
@@ -206,8 +206,8 @@ void tsi721_bdma_handler(struct tsi721_bdma_chan *bdma_chan)
{
/* Disable BDMA channel interrupts */
iowrite32(0, bdma_chan->regs + TSI721_DMAC_INTE);
-
- tasklet_schedule(&bdma_chan->tasklet);
+ if (bdma_chan->active)
+ tasklet_schedule(&bdma_chan->tasklet);
}
#ifdef CONFIG_PCI_MSI
@@ -562,7 +562,7 @@ static int tsi721_alloc_chan_resources(struct dma_chan *dchan)
}
#endif /* CONFIG_PCI_MSI */
- tasklet_enable(&bdma_chan->tasklet);
+ bdma_chan->active = true;
tsi721_bdma_interrupt_enable(bdma_chan, 1);
return bdma_chan->bd_num - 1;
@@ -576,9 +576,7 @@ err_out:
static void tsi721_free_chan_resources(struct dma_chan *dchan)
{
struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
-#ifdef CONFIG_PCI_MSI
struct tsi721_device *priv = to_tsi721(dchan->device);
-#endif
LIST_HEAD(list);
dev_dbg(dchan->device->dev, "%s: Entry\n", __func__);
@@ -589,14 +587,25 @@ static void tsi721_free_chan_resources(struct dma_chan *dchan)
BUG_ON(!list_empty(&bdma_chan->active_list));
BUG_ON(!list_empty(&bdma_chan->queue));
- tasklet_disable(&bdma_chan->tasklet);
+ tsi721_bdma_interrupt_enable(bdma_chan, 0);
+ bdma_chan->active = false;
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ synchronize_irq(priv->msix[TSI721_VECT_DMA0_DONE +
+ bdma_chan->id].vector);
+ synchronize_irq(priv->msix[TSI721_VECT_DMA0_INT +
+ bdma_chan->id].vector);
+ } else
+#endif
+ synchronize_irq(priv->pdev->irq);
+
+ tasklet_kill(&bdma_chan->tasklet);
spin_lock_bh(&bdma_chan->lock);
list_splice_init(&bdma_chan->free_list, &list);
spin_unlock_bh(&bdma_chan->lock);
- tsi721_bdma_interrupt_enable(bdma_chan, 0);
-
#ifdef CONFIG_PCI_MSI
if (priv->flags & TSI721_USING_MSIX) {
free_irq(priv->msix[TSI721_VECT_DMA0_DONE +
@@ -790,6 +799,7 @@ int tsi721_register_dma(struct tsi721_device *priv)
bdma_chan->dchan.cookie = 1;
bdma_chan->dchan.chan_id = i;
bdma_chan->id = i;
+ bdma_chan->active = false;
spin_lock_init(&bdma_chan->lock);
@@ -799,7 +809,6 @@ int tsi721_register_dma(struct tsi721_device *priv)
tasklet_init(&bdma_chan->tasklet, tsi721_dma_tasklet,
(unsigned long)bdma_chan);
- tasklet_disable(&bdma_chan->tasklet);
list_add_tail(&bdma_chan->dchan.device_node,
&mport->dma.channels);
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit f56cbbb4b5871e5bc2838ddeeba5b29debc2a734 upstream.
This patch converts iscsit_ack_from_expstatsn() to populate a local
ack_list of commands, and call iscsit_free_cmd() directly from RX
thread context, instead of using iscsit_add_cmd_to_immediate_queue()
to queue the acknowledged commands to be released from TX thread
context.
It is helpful to release the acknowledge commands as quickly as
possible, along with the associated percpu_ida tags, in order to
prevent percpu_ida_alloc() from having to steal tags from other
CPUs while waiting for iscsit_free_cmd() to happen from TX thread
context.
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/target/iscsi/iscsi_target.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 9c6136e..f6de529 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -774,7 +774,8 @@ static void iscsit_unmap_iovec(struct iscsi_cmd *cmd)
static void iscsit_ack_from_expstatsn(struct iscsi_conn *conn, u32 exp_statsn)
{
- struct iscsi_cmd *cmd;
+ LIST_HEAD(ack_list);
+ struct iscsi_cmd *cmd, *cmd_p;
conn->exp_statsn = exp_statsn;
@@ -782,19 +783,23 @@ static void iscsit_ack_from_expstatsn(struct iscsi_conn *conn, u32 exp_statsn)
return;
spin_lock_bh(&conn->cmd_lock);
- list_for_each_entry(cmd, &conn->conn_cmd_list, i_conn_node) {
+ list_for_each_entry_safe(cmd, cmd_p, &conn->conn_cmd_list, i_conn_node) {
spin_lock(&cmd->istate_lock);
if ((cmd->i_state == ISTATE_SENT_STATUS) &&
iscsi_sna_lt(cmd->stat_sn, exp_statsn)) {
cmd->i_state = ISTATE_REMOVE;
spin_unlock(&cmd->istate_lock);
- iscsit_add_cmd_to_immediate_queue(cmd, conn,
- cmd->i_state);
+ list_move_tail(&cmd->i_conn_node, &ack_list);
continue;
}
spin_unlock(&cmd->istate_lock);
}
spin_unlock_bh(&conn->cmd_lock);
+
+ list_for_each_entry_safe(cmd, cmd_p, &ack_list, i_conn_node) {
+ list_del(&cmd->i_conn_node);
+ iscsit_free_cmd(cmd, false);
+ }
}
static int iscsit_allocate_iovecs(struct iscsi_cmd *cmd)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit a2a99cea5ec7c1e47825559f0e75a4efbcf8aee3 upstream.
This patch fixes a bug in iscsit_get_tpg_from_np() where the
tpg->tpg_state sanity check was looking for TPG_STATE_FREE,
instead of != TPG_STATE_ACTIVE.
The latter is expected during a normal TPG shutdown once the
tpg_state goes into TPG_STATE_INACTIVE in order to reject any
new incoming login attempts.
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/target/iscsi/iscsi_target_tpg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/target/iscsi/iscsi_target_tpg.c b/drivers/target/iscsi/iscsi_target_tpg.c
index 439260b..f31b4c5 100644
--- a/drivers/target/iscsi/iscsi_target_tpg.c
+++ b/drivers/target/iscsi/iscsi_target_tpg.c
@@ -138,7 +138,7 @@ struct iscsi_portal_group *iscsit_get_tpg_from_np(
list_for_each_entry(tpg, &tiqn->tiqn_tpg_list, tpg_list) {
spin_lock(&tpg->tpg_state_lock);
- if (tpg->tpg_state == TPG_STATE_FREE) {
+ if (tpg->tpg_state != TPG_STATE_ACTIVE) {
spin_unlock(&tpg->tpg_state_lock);
continue;
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Minchan Kim <[email protected]>
commit db5d711e2db776f18219b033e5dc4fb7e4264dd7 upstream.
zram_meta_alloc could fail so caller should check it. Otherwise, your
system will hang.
Signed-off-by: Minchan Kim <[email protected]>
Acked-by: Jerome Marchand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
[ luis: backported to 3.11:
- zram is a staging driver in 3.11 kernel ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/staging/zram/zram_drv.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index fc540ea..9f1cb4e0 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -620,6 +620,8 @@ static ssize_t disksize_store(struct device *dev,
disksize = PAGE_ALIGN(disksize);
meta = zram_meta_alloc(disksize);
+ if (!meta)
+ return -ENOMEM;
down_write(&zram->init_lock);
if (zram->init_done) {
up_write(&zram->init_lock);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Kleine-Budde <[email protected]>
commit b1aa1c7a2165b44ecce66286a3095cc6c7667d1c upstream.
This patch factors out freeze and unfreeze of the CAN core into seperate
functions. Experiments have shown that the transition from and to freeze mode
may take several microseconds, especially the time entering the freeze mode
depends on the current bitrate.
This patch adds a while loop which polls the Freeze Mode ACK bit (FRZ_ACK) that
indicates a successfull mode change. If the function runs into a timeout a
error value is returned.
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/can/flexcan.c | 60 ++++++++++++++++++++++++++++++++++++++---------
1 file changed, 49 insertions(+), 11 deletions(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index d065715..bc30fd1 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -322,6 +322,44 @@ static int flexcan_chip_disable(struct flexcan_priv *priv)
return 0;
}
+static int flexcan_chip_freeze(struct flexcan_priv *priv)
+{
+ struct flexcan_regs __iomem *regs = priv->base;
+ unsigned int timeout = 1000 * 1000 * 10 / priv->can.bittiming.bitrate;
+ u32 reg;
+
+ reg = flexcan_read(®s->mcr);
+ reg |= FLEXCAN_MCR_HALT;
+ flexcan_write(reg, ®s->mcr);
+
+ while (timeout-- && !(flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
+ usleep_range(100, 200);
+
+ if (!(flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int flexcan_chip_unfreeze(struct flexcan_priv *priv)
+{
+ struct flexcan_regs __iomem *regs = priv->base;
+ unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
+ u32 reg;
+
+ reg = flexcan_read(®s->mcr);
+ reg &= ~FLEXCAN_MCR_HALT;
+ flexcan_write(reg, ®s->mcr);
+
+ while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
+ usleep_range(10, 20);
+
+ if (flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
static int flexcan_get_berr_counter(const struct net_device *dev,
struct can_berr_counter *bec)
{
@@ -753,7 +791,7 @@ static int flexcan_chip_start(struct net_device *dev)
netdev_err(dev, "Failed to softreset can module (mcr=0x%08x)\n",
reg_mcr);
err = -ENODEV;
- goto out;
+ goto out_chip_disable;
}
flexcan_set_bittiming(dev);
@@ -823,12 +861,12 @@ static int flexcan_chip_start(struct net_device *dev)
err = flexcan_transceiver_enable(priv);
if (err)
- goto out;
+ goto out_chip_disable;
/* synchronize with the can bus */
- reg_mcr = flexcan_read(®s->mcr);
- reg_mcr &= ~FLEXCAN_MCR_HALT;
- flexcan_write(reg_mcr, ®s->mcr);
+ err = flexcan_chip_unfreeze(priv);
+ if (err)
+ goto out_transceiver_disable;
priv->can.state = CAN_STATE_ERROR_ACTIVE;
@@ -841,7 +879,9 @@ static int flexcan_chip_start(struct net_device *dev)
return 0;
- out:
+ out_transceiver_disable:
+ flexcan_transceiver_disable(priv);
+ out_chip_disable:
flexcan_chip_disable(priv);
return err;
}
@@ -856,12 +896,10 @@ static void flexcan_chip_stop(struct net_device *dev)
{
struct flexcan_priv *priv = netdev_priv(dev);
struct flexcan_regs __iomem *regs = priv->base;
- u32 reg;
- /* Disable + halt module */
- reg = flexcan_read(®s->mcr);
- reg |= FLEXCAN_MCR_MDIS | FLEXCAN_MCR_HALT;
- flexcan_write(reg, ®s->mcr);
+ /* freeze + disable module */
+ flexcan_chip_freeze(priv);
+ flexcan_chip_disable(priv);
/* Disable all interrupts */
flexcan_write(0, ®s->imask1);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <[email protected]>
commit 6375b768a9850b6154478993e5fb566fa4614a9c upstream.
Single-link DVI max dotclock is 165MHz. Filter out modes with higher
dotclock when the monitor doesn't support HDMI.
Modes higher than 165 MHz were allowed in
commit 7d148ef51a657fd04036c3ed7803da600dd0d451
Author: Daniel Vetter <[email protected]>
Date: Mon Jul 22 18:02:39 2013 +0200
drm/i915: fix hdmi portclock limits
Also don't attempt to use 12bpc mode with DVI monitors.
Cc: Adam Nielsen <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75345
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70331
Tested-by: Ralf Jung <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/i915/intel_hdmi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 2fd3fd5..5745277 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -789,7 +789,7 @@ static int hdmi_portclock_limit(struct intel_hdmi *hdmi)
{
struct drm_device *dev = intel_hdmi_to_dev(hdmi);
- if (IS_G4X(dev))
+ if (!hdmi->has_hdmi_sink || IS_G4X(dev))
return 165000;
else if (IS_HASWELL(dev))
return 300000;
@@ -842,8 +842,8 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
* outputs. We also need to check that the higher clock still fits
* within limits.
*/
- if (pipe_config->pipe_bpp > 8*3 && clock_12bpc <= portclock_limit
- && HAS_PCH_SPLIT(dev)) {
+ if (pipe_config->pipe_bpp > 8*3 && intel_hdmi->has_hdmi_sink &&
+ clock_12bpc <= portclock_limit && HAS_PCH_SPLIT(dev)) {
DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
desired_bpp = 12*3;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Kleine-Budde <[email protected]>
commit 5be93bdda64e85450598c6e97f79fb8f6acf30e0 upstream.
When shutting down the CAN interface (ifconfig canX down) during high CAN bus
loads, the CAN core might hang and freeze the whole CPU.
This patch fixes the shutdown sequence by first disabling the CAN core then
disabling all interrupts.
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/can/flexcan.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index eb6b191..ce3ee69 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -824,14 +824,16 @@ static void flexcan_chip_stop(struct net_device *dev)
struct flexcan_regs __iomem *regs = priv->base;
u32 reg;
- /* Disable all interrupts */
- flexcan_write(0, ®s->imask1);
-
/* Disable + halt module */
reg = flexcan_read(®s->mcr);
reg |= FLEXCAN_MCR_MDIS | FLEXCAN_MCR_HALT;
flexcan_write(reg, ®s->mcr);
+ /* Disable all interrupts */
+ flexcan_write(0, ®s->imask1);
+ flexcan_write(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL,
+ ®s->ctrl);
+
if (priv->reg_xceiver)
regulator_disable(priv->reg_xceiver);
priv->can.state = CAN_STATE_STOPPED;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Imre Deak <[email protected]>
commit 17b0c1f7865d8bf4f5e5aa94e2aeafb35d23e4e9 upstream.
We reserve the space for the power context in stolen memory at a fixed
address from a delayed work. This races with the subsequent driver
init/resume code which could allocate something at that address, so the
reservation for the power context fails. Reserve the space up-front, so
this can't happen. This also adds a missing struct_mutex lock around the
stolen allocation, which wasn't taken in the delayed work path.
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Jesse Barnes <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/i915/intel_pm.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index cad0482..94799b6 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3474,6 +3474,8 @@ static void valleyview_setup_pctx(struct drm_device *dev)
u32 pcbr;
int pctx_size = 24*1024;
+ WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
pcbr = I915_READ(VLV_PCBR);
if (pcbr) {
/* BIOS set it up already, grab the pre-alloc'd space */
@@ -3522,8 +3524,6 @@ static void valleyview_enable_rps(struct drm_device *dev)
I915_WRITE(GTFIFODBG, gtfifodbg);
}
- valleyview_setup_pctx(dev);
-
gen6_gt_force_wake_get(dev_priv);
I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
@@ -4387,6 +4387,8 @@ void intel_enable_gt_powersave(struct drm_device *dev)
ironlake_enable_rc6(dev);
intel_init_emon(dev);
} else if (IS_GEN6(dev) || IS_GEN7(dev)) {
+ if (IS_VALLEYVIEW(dev))
+ valleyview_setup_pctx(dev);
/*
* PCU communication is slow and this doesn't need to be
* done at any specific time, so do this out of our fast path
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Imre Deak <[email protected]>
commit bcdb72ac7c00d2b56359fc82bcc8fe50454717d5 upstream.
pci_get_class(class, from) drops the refcount for 'from', so the
extra pci_dev_put we do on it will result in a use after free bug
starting with the WARN below.
Regression introduced in
commit 6a9c4b35e6696a63805b6da5e4889c6986e9ee1b
Author: Rui Guo <[email protected]>
Date: Wed Jun 19 21:10:23 2013 +0800
drm/i915: Fix PCH detect with multiple ISA bridges in VM
[ 164.338460] WARNING: CPU: 1 PID: 2094 at include/linux/kref.h:47 klist_next+0xae/0x110()
[ 164.347731] CPU: 1 PID: 2094 Comm: modprobe Tainted: G O 3.13.0-imre+ #354
[ 164.356468] Hardware name: Intel Corp. VALLEYVIEW B0 PLATFORM/NOTEBOOK, BIOS BYTICRB1.X64.0062.R70.1310112051 10/11/2013
[ 164.368796] Call Trace:
[ 164.371609] [<ffffffff816a32a6>] dump_stack+0x4e/0x7a
[ 164.377447] [<ffffffff8104f75d>] warn_slowpath_common+0x7d/0xa0
[ 164.384238] [<ffffffff8104f83a>] warn_slowpath_null+0x1a/0x20
[ 164.390851] [<ffffffff8169aeae>] klist_next+0xae/0x110
[ 164.396777] [<ffffffff8130a110>] ? pci_do_find_bus+0x70/0x70
[ 164.403286] [<ffffffff813cb4a9>] bus_find_device+0x89/0xc0
[ 164.409719] [<ffffffff8130a373>] pci_get_dev_by_id+0x63/0xa0
[ 164.416238] [<ffffffff8130a4e4>] pci_get_class+0x44/0x50
[ 164.422433] [<ffffffffa034821f>] intel_dsm_detect+0x16f/0x1f0 [i915]
[ 164.429801] [<ffffffffa03482ae>] intel_register_dsm_handler+0xe/0x10 [i915]
[ 164.437831] [<ffffffffa02d30fe>] i915_driver_load+0xafe/0xf30 [i915]
[ 164.445126] [<ffffffff8158a150>] ? intel_alloc_coherent+0x110/0x110
[ 164.452340] [<ffffffffa0148c07>] drm_dev_register+0xc7/0x150 [drm]
[ 164.459462] [<ffffffffa014b23f>] drm_get_pci_dev+0x11f/0x1f0 [drm]
[ 164.466554] [<ffffffff816abb81>] ? _raw_spin_unlock_irqrestore+0x51/0x70
[ 164.474287] [<ffffffffa02cf7a6>] i915_pci_probe+0x56/0x60 [i915]
[ 164.481185] [<ffffffff8130a028>] pci_device_probe+0x78/0xf0
[ 164.487603] [<ffffffff813cd495>] driver_probe_device+0x155/0x350
[ 164.494505] [<ffffffff813cd74e>] __driver_attach+0x6e/0xa0
[ 164.500826] [<ffffffff813cd6e0>] ? __device_attach+0x50/0x50
[ 164.507333] [<ffffffff813cb2be>] bus_for_each_dev+0x6e/0xc0
[ 164.513752] [<ffffffff813ccefe>] driver_attach+0x1e/0x20
[ 164.519870] [<ffffffff813cc958>] bus_add_driver+0x138/0x260
[ 164.526289] [<ffffffffa0188000>] ? 0xffffffffa0187fff
[ 164.532116] [<ffffffff813cde78>] driver_register+0x98/0xe0
[ 164.538558] [<ffffffffa0188000>] ? 0xffffffffa0187fff
[ 164.544389] [<ffffffff813087b0>] __pci_register_driver+0x60/0x70
[ 164.551336] [<ffffffffa014b37d>] drm_pci_init+0x6d/0x120 [drm]
[ 164.558040] [<ffffffffa0188000>] ? 0xffffffffa0187fff
[ 164.563928] [<ffffffffa018806a>] i915_init+0x6a/0x6c [i915]
[ 164.570363] [<ffffffff810002da>] do_one_initcall+0xaa/0x160
[ 164.576783] [<ffffffff8103b140>] ? set_memory_nx+0x40/0x50
[ 164.583100] [<ffffffff810ce7f5>] load_module+0x1fb5/0x2550
[ 164.589410] [<ffffffff810caab0>] ? store_uevent+0x40/0x40
[ 164.595628] [<ffffffff810cee7d>] SyS_init_module+0xed/0x100
[ 164.602048] [<ffffffff816b3c52>] system_call_fastpath+0x16/0x1b
v2: simplify the loop further (Chris)
Signed-off-by: Imre Deak <[email protected]>
Cc: Jesse Barnes <[email protected]>
Reported-by: Jesse Barnes <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65652
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74161
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/i915/i915_drv.c | 23 +++++++++--------------
1 file changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 9180fde..61684db 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -450,7 +450,7 @@ MODULE_DEVICE_TABLE(pci, pciidlist);
void intel_detect_pch(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- struct pci_dev *pch;
+ struct pci_dev *pch = NULL;
/* In all current cases, num_pipes is equivalent to the PCH_NOP setting
* (which really amounts to a PCH but no South Display).
@@ -471,12 +471,9 @@ void intel_detect_pch(struct drm_device *dev)
* all the ISA bridge devices and check for the first match, instead
* of only checking the first one.
*/
- pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
- while (pch) {
- struct pci_dev *curr = pch;
+ while ((pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, pch))) {
if (pch->vendor == PCI_VENDOR_ID_INTEL) {
- unsigned short id;
- id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
+ unsigned short id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
dev_priv->pch_id = id;
if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
@@ -502,18 +499,16 @@ void intel_detect_pch(struct drm_device *dev)
DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
WARN_ON(!IS_HASWELL(dev));
WARN_ON(!IS_ULT(dev));
- } else {
- goto check_next;
- }
- pci_dev_put(pch);
+ } else
+ continue;
+
break;
}
-check_next:
- pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, curr);
- pci_dev_put(curr);
}
if (!pch)
- DRM_DEBUG_KMS("No PCH found?\n");
+ DRM_DEBUG_KMS("No PCH found.\n");
+
+ pci_dev_put(pch);
}
bool i915_semaphore_is_enabled(struct drm_device *dev)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Kleine-Budde <[email protected]>
commit f003698e23f6f56a791774f14d0ac35d04872490 upstream.
This patch moves the transceiver enable and disable into seperate functions,
where the NULL pointer check is hidden.
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/can/flexcan.c | 27 ++++++++++++++++++++-------
1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index c9ea959..d065715 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -261,6 +261,22 @@ static inline void flexcan_write(u32 val, void __iomem *addr)
}
#endif
+static inline int flexcan_transceiver_enable(const struct flexcan_priv *priv)
+{
+ if (!priv->reg_xceiver)
+ return 0;
+
+ return regulator_enable(priv->reg_xceiver);
+}
+
+static inline int flexcan_transceiver_disable(const struct flexcan_priv *priv)
+{
+ if (!priv->reg_xceiver)
+ return 0;
+
+ return regulator_disable(priv->reg_xceiver);
+}
+
static inline int flexcan_has_and_handle_berr(const struct flexcan_priv *priv,
u32 reg_esr)
{
@@ -805,11 +821,9 @@ static int flexcan_chip_start(struct net_device *dev)
if (priv->devtype_data->features & FLEXCAN_HAS_V10_FEATURES)
flexcan_write(0x0, ®s->rxfgmask);
- if (priv->reg_xceiver) {
- err = regulator_enable(priv->reg_xceiver);
- if (err)
- goto out;
- }
+ err = flexcan_transceiver_enable(priv);
+ if (err)
+ goto out;
/* synchronize with the can bus */
reg_mcr = flexcan_read(®s->mcr);
@@ -854,8 +868,7 @@ static void flexcan_chip_stop(struct net_device *dev)
flexcan_write(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL,
®s->ctrl);
- if (priv->reg_xceiver)
- regulator_disable(priv->reg_xceiver);
+ flexcan_transceiver_disable(priv);
priv->can.state = CAN_STATE_STOPPED;
return;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Kleine-Budde <[email protected]>
commit 7e9e148af01ef388efb6e2490805970be4622792 upstream.
If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed,
this patch adds the missing cleanup.
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/can/flexcan.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index ce3ee69..394b2eb 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -860,7 +860,7 @@ static int flexcan_open(struct net_device *dev)
/* start chip and queuing */
err = flexcan_chip_start(dev);
if (err)
- goto out_close;
+ goto out_free_irq;
can_led_event(dev, CAN_LED_EVENT_OPEN);
@@ -869,6 +869,8 @@ static int flexcan_open(struct net_device *dev)
return 0;
+ out_free_irq:
+ free_irq(dev->irq, dev);
out_close:
close_candev(dev);
out:
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Kleine-Budde <[email protected]>
commit 9b00b300e7bce032c467c36ca47fe2a776887fc2 upstream.
In flexcan_chip_enable() and flexcan_chip_disable() fixed delays are used.
Experiments have shown that the transition from and to low power mode may take
several microseconds.
This patch adds a while loop which polls the Low Power Mode ACK bit (LPM_ACK)
that indicates a successfull mode change. If the function runs into a timeout a
error value is returned.
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/can/flexcan.c | 50 +++++++++++++++++++++++++++++++++++------------
1 file changed, 38 insertions(+), 12 deletions(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 0bd9e2f..c9ea959 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -144,6 +144,8 @@
#define FLEXCAN_MB_CODE_MASK (0xf0ffffff)
+#define FLEXCAN_TIMEOUT_US (50)
+
/*
* FLEXCAN hardware feature flags
*
@@ -266,26 +268,42 @@ static inline int flexcan_has_and_handle_berr(const struct flexcan_priv *priv,
(reg_esr & FLEXCAN_ESR_ERR_BUS);
}
-static inline void flexcan_chip_enable(struct flexcan_priv *priv)
+static int flexcan_chip_enable(struct flexcan_priv *priv)
{
struct flexcan_regs __iomem *regs = priv->base;
+ unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
u32 reg;
reg = flexcan_read(®s->mcr);
reg &= ~FLEXCAN_MCR_MDIS;
flexcan_write(reg, ®s->mcr);
- udelay(10);
+ while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK))
+ usleep_range(10, 20);
+
+ if (flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)
+ return -ETIMEDOUT;
+
+ return 0;
}
-static inline void flexcan_chip_disable(struct flexcan_priv *priv)
+static int flexcan_chip_disable(struct flexcan_priv *priv)
{
struct flexcan_regs __iomem *regs = priv->base;
+ unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
u32 reg;
reg = flexcan_read(®s->mcr);
reg |= FLEXCAN_MCR_MDIS;
flexcan_write(reg, ®s->mcr);
+
+ while (timeout-- && !(flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK))
+ usleep_range(10, 20);
+
+ if (!(flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK))
+ return -ETIMEDOUT;
+
+ return 0;
}
static int flexcan_get_berr_counter(const struct net_device *dev,
@@ -706,7 +724,9 @@ static int flexcan_chip_start(struct net_device *dev)
u32 reg_mcr, reg_ctrl;
/* enable module */
- flexcan_chip_enable(priv);
+ err = flexcan_chip_enable(priv);
+ if (err)
+ return err;
/* soft reset */
flexcan_write(FLEXCAN_MCR_SOFTRST, ®s->mcr);
@@ -946,12 +966,16 @@ static int register_flexcandev(struct net_device *dev)
goto out_disable_ipg;
/* select "bus clock", chip must be disabled */
- flexcan_chip_disable(priv);
+ err = flexcan_chip_disable(priv);
+ if (err)
+ goto out_disable_per;
reg = flexcan_read(®s->ctrl);
reg |= FLEXCAN_CTRL_CLK_SRC;
flexcan_write(reg, ®s->ctrl);
- flexcan_chip_enable(priv);
+ err = flexcan_chip_enable(priv);
+ if (err)
+ goto out_chip_disable;
/* set freeze, halt and activate FIFO, restrict register access */
reg = flexcan_read(®s->mcr);
@@ -968,14 +992,15 @@ static int register_flexcandev(struct net_device *dev)
if (!(reg & FLEXCAN_MCR_FEN)) {
netdev_err(dev, "Could not enable RX FIFO, unsupported core\n");
err = -ENODEV;
- goto out_disable_per;
+ goto out_chip_disable;
}
err = register_candev(dev);
- out_disable_per:
/* disable core and turn off clocks */
+ out_chip_disable:
flexcan_chip_disable(priv);
+ out_disable_per:
clk_disable_unprepare(priv->clk_per);
out_disable_ipg:
clk_disable_unprepare(priv->clk_ipg);
@@ -1147,8 +1172,11 @@ static int flexcan_suspend(struct device *device)
{
struct net_device *dev = dev_get_drvdata(device);
struct flexcan_priv *priv = netdev_priv(dev);
+ int err;
- flexcan_chip_disable(priv);
+ err = flexcan_chip_disable(priv);
+ if (err)
+ return err;
if (netif_running(dev)) {
netif_stop_queue(dev);
@@ -1169,9 +1197,7 @@ static int flexcan_resume(struct device *device)
netif_device_attach(dev);
netif_start_queue(dev);
}
- flexcan_chip_enable(priv);
-
- return 0;
+ return flexcan_chip_enable(priv);
}
#endif /* CONFIG_PM_SLEEP */
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Fabio Estevam <[email protected]>
commit aa10181bdac99a623517f0f2bfa14cd98c749246 upstream.
clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/can/flexcan.c | 28 ++++++++++++++++++++--------
1 file changed, 20 insertions(+), 8 deletions(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 394b2eb..0bd9e2f 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -846,12 +846,17 @@ static int flexcan_open(struct net_device *dev)
struct flexcan_priv *priv = netdev_priv(dev);
int err;
- clk_prepare_enable(priv->clk_ipg);
- clk_prepare_enable(priv->clk_per);
+ err = clk_prepare_enable(priv->clk_ipg);
+ if (err)
+ return err;
+
+ err = clk_prepare_enable(priv->clk_per);
+ if (err)
+ goto out_disable_ipg;
err = open_candev(dev);
if (err)
- goto out;
+ goto out_disable_per;
err = request_irq(dev->irq, flexcan_irq, IRQF_SHARED, dev->name, dev);
if (err)
@@ -873,8 +878,9 @@ static int flexcan_open(struct net_device *dev)
free_irq(dev->irq, dev);
out_close:
close_candev(dev);
- out:
+ out_disable_per:
clk_disable_unprepare(priv->clk_per);
+ out_disable_ipg:
clk_disable_unprepare(priv->clk_ipg);
return err;
@@ -931,8 +937,13 @@ static int register_flexcandev(struct net_device *dev)
struct flexcan_regs __iomem *regs = priv->base;
u32 reg, err;
- clk_prepare_enable(priv->clk_ipg);
- clk_prepare_enable(priv->clk_per);
+ err = clk_prepare_enable(priv->clk_ipg);
+ if (err)
+ return err;
+
+ err = clk_prepare_enable(priv->clk_per);
+ if (err)
+ goto out_disable_ipg;
/* select "bus clock", chip must be disabled */
flexcan_chip_disable(priv);
@@ -957,15 +968,16 @@ static int register_flexcandev(struct net_device *dev)
if (!(reg & FLEXCAN_MCR_FEN)) {
netdev_err(dev, "Could not enable RX FIFO, unsupported core\n");
err = -ENODEV;
- goto out;
+ goto out_disable_per;
}
err = register_candev(dev);
- out:
+ out_disable_per:
/* disable core and turn off clocks */
flexcan_chip_disable(priv);
clk_disable_unprepare(priv->clk_per);
+ out_disable_ipg:
clk_disable_unprepare(priv->clk_ipg);
return err;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Gabor Juhos <[email protected]>
commit 61d1cf163c8653934cc8cd5d0b2a562d0990c265 upstream.
The 'ath79_spi_setup_cs' function initializes the chip
select line of a given SPI device in order to make sure
that the device is inactive.
If the SPI_CS_HIGH bit is set for a given device, it
means that the CS line of that device is active HIGH
so it must be set to LOW initially. In case of GPIO
CS lines, the 'ath79_spi_setup_cs' function does the
opposite of that due to the wrong GPIO flags.
Fix the code to use the correct GPIO flags.
Reported-by: Ronald Wahl <[email protected]>
Signed-off-by: Gabor Juhos <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/spi/spi-ath79.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index 0e06407..696599a 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -132,9 +132,9 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
flags = GPIOF_DIR_OUT;
if (spi->mode & SPI_CS_HIGH)
- flags |= GPIOF_INIT_HIGH;
- else
flags |= GPIOF_INIT_LOW;
+ else
+ flags |= GPIOF_INIT_HIGH;
status = gpio_request_one(cdata->gpio, flags,
dev_name(&spi->dev));
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <[email protected]>
commit cb664981607a6b5b3d670ad57bbda893b2528d96 upstream.
When a VHT network uses 20 or 40 MHz as per the HT operation
information, the channel center frequency segment 0 field in
the VHT operation information is reserved, so ignore it.
This fixes association with such networks when the AP puts 0
into the field, previously we'd disconnect due to an invalid
channel with the message
wlan0: AP VHT information is invalid, disable VHT
Fixes: f2d9d270c15ae ("mac80211: support VHT association")
Reported-by: Tim Nelson <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/mac80211/mlme.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 59f69fd..a83d76a 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -282,6 +282,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
switch (vht_oper->chan_width) {
case IEEE80211_VHT_CHANWIDTH_USE_HT:
vht_chandef.width = chandef->width;
+ vht_chandef.center_freq1 = chandef->center_freq1;
break;
case IEEE80211_VHT_CHANWIDTH_80MHZ:
vht_chandef.width = NL80211_CHAN_WIDTH_80;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Marius Knaust <[email protected]>
commit a6b92b6650d010d58b6e6fe42c6271266e0b1134 upstream.
Signed-off-by: Marius Knaust <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index d2bd1d5..add9f3d 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3766,6 +3766,7 @@ static const struct hda_fixup alc269_fixups[] = {
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
+ SND_PCI_QUIRK(0x1025, 0x0283, "Acer TravelMate 8371", ALC269_FIXUP_INV_DMIC),
SND_PCI_QUIRK(0x1025, 0x029b, "Acer 1810TZ", ALC269_FIXUP_INV_DMIC),
SND_PCI_QUIRK(0x1025, 0x0349, "Acer AOD260", ALC269_FIXUP_INV_DMIC),
SND_PCI_QUIRK(0x1028, 0x05bd, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit 755a48a7a4eb05b9c8424e3017d947b2961a60e0 upstream.
The clean-up in commit 36281caa839f ended up removing a NULL pointer check
that is needed in order to prevent an Oops in
nfs_async_inode_return_delegation().
Reported-by: "Yan, Zheng" <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 36281caa839f (NFSv4: Further clean-ups of delegation stateid validation)
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/nfs/delegation.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 7ec4814..bc407aa 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -656,16 +656,19 @@ int nfs_async_inode_return_delegation(struct inode *inode,
rcu_read_lock();
delegation = rcu_dereference(NFS_I(inode)->delegation);
+ if (delegation == NULL)
+ goto out_enoent;
- if (!clp->cl_mvops->match_stateid(&delegation->stateid, stateid)) {
- rcu_read_unlock();
- return -ENOENT;
- }
+ if (!clp->cl_mvops->match_stateid(&delegation->stateid, stateid))
+ goto out_enoent;
nfs_mark_return_delegation(server, delegation);
rcu_read_unlock();
nfs_delegation_run_state_manager(clp);
return 0;
+out_enoent:
+ rcu_read_unlock();
+ return -ENOENT;
}
static struct inode *
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Li Zefan <[email protected]>
commit 99afb0fd5f05aac467ffa85c36778fec4396209b upstream.
It's not safe to access task's cpuset after releasing task_lock().
Holding callback_mutex won't help.
Signed-off-by: Li Zefan <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/cpuset.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 84773c7..26e7a5d 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -2518,9 +2518,9 @@ int __cpuset_node_allowed_softwall(int node, gfp_t gfp_mask)
task_lock(current);
cs = nearest_hardwall_ancestor(task_cs(current));
+ allowed = node_isset(node, cs->mems_allowed);
task_unlock(current);
- allowed = node_isset(node, cs->mems_allowed);
mutex_unlock(&callback_mutex);
return allowed;
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Bing Zhao <[email protected]>
commit adb07df1e039e9fe43e66aeea8b4771f83659dbb upstream.
As many Surface Pro I & II users have found out, the mwifiex_usb
doesn't support usb autosuspend, and it has caused some system
stability issues.
Bug 69661 - mwifiex_usb on MS Surface Pro 1 is unstable
Bug 60815 - Interface hangs in mwifiex_usb
Bug 64111 - mwifiex_usb USB8797 crash failed to get signal
information
USB autosuspend get triggered when Surface Pro's AC power is
removed or powertop enables power saving on USB8797 device.
Driver's suspend handler is called here, but resume handler
won't be called until the AC power is put back on or powertop
disables power saving for USB8797.
We need to refactor the suspend/resume handlers to support
usb autosuspend properly. For now let's just remove it.
Signed-off-by: Bing Zhao <[email protected]>
Signed-off-by: Amitkumar Karwar <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/mwifiex/usb.c | 8 --------
1 file changed, 8 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c
index b7adf3d..923e348 100644
--- a/drivers/net/wireless/mwifiex/usb.c
+++ b/drivers/net/wireless/mwifiex/usb.c
@@ -511,13 +511,6 @@ static int mwifiex_usb_resume(struct usb_interface *intf)
MWIFIEX_BSS_ROLE_ANY),
MWIFIEX_ASYNC_CMD);
-#ifdef CONFIG_PM
- /* Resume handler may be called due to remote wakeup,
- * force to exit suspend anyway
- */
- usb_disable_autosuspend(card->udev);
-#endif /* CONFIG_PM */
-
return 0;
}
@@ -576,7 +569,6 @@ static struct usb_driver mwifiex_usb_driver = {
.id_table = mwifiex_usb_table,
.suspend = mwifiex_usb_suspend,
.resume = mwifiex_usb_resume,
- .supports_autosuspend = 1,
};
static int mwifiex_usb_tx_init(struct mwifiex_adapter *adapter)
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang Rui <[email protected]>
commit b355cee88e3b1a193f0e9a81db810f6f83ad728b upstream.
ACPI table may export resource entry with 0 length.
But the current code interprets this kind of resource in a wrong way.
It will create a resource structure with
res->end = acpi_resource->start + acpi_resource->len - 1;
This patch fixes a problem on my machine that a platform device fails
to be created because one of its ACPI IO resource entry (start = 0,
end = 0, length = 0) is translated into a generic resource with
start = 0, end = 0xffffffff.
Signed-off-by: Zhang Rui <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/acpi/resource.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 3322b47..c2dd598 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -77,18 +77,24 @@ bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res)
switch (ares->type) {
case ACPI_RESOURCE_TYPE_MEMORY24:
memory24 = &ares->data.memory24;
+ if (!memory24->address_length)
+ return false;
acpi_dev_get_memresource(res, memory24->minimum,
memory24->address_length,
memory24->write_protect);
break;
case ACPI_RESOURCE_TYPE_MEMORY32:
memory32 = &ares->data.memory32;
+ if (!memory32->address_length)
+ return false;
acpi_dev_get_memresource(res, memory32->minimum,
memory32->address_length,
memory32->write_protect);
break;
case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
fixed_memory32 = &ares->data.fixed_memory32;
+ if (!fixed_memory32->address_length)
+ return false;
acpi_dev_get_memresource(res, fixed_memory32->address,
fixed_memory32->address_length,
fixed_memory32->write_protect);
@@ -144,12 +150,16 @@ bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res)
switch (ares->type) {
case ACPI_RESOURCE_TYPE_IO:
io = &ares->data.io;
+ if (!io->address_length)
+ return false;
acpi_dev_get_ioresource(res, io->minimum,
io->address_length,
io->io_decode);
break;
case ACPI_RESOURCE_TYPE_FIXED_IO:
fixed_io = &ares->data.fixed_io;
+ if (!fixed_io->address_length)
+ return false;
acpi_dev_get_ioresource(res, fixed_io->address,
fixed_io->address_length,
ACPI_DECODE_10);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: George McCollister <[email protected]>
commit 791c9e0292671a3bfa95286bb5c08129d8605618 upstream.
dequeue_entity() is called when p->on_rq and sets se->on_rq = 0
which appears to guarentee that the !se->on_rq condition is met.
If the task has done set_current_state(TASK_INTERRUPTIBLE) without
schedule() the second condition will be met and vruntime will be
incorrectly adjusted twice.
In certain cases this can result in the task's vruntime never increasing
past the vruntime of other tasks on the CFS' run queue, starving them of
CPU time.
This patch changes switched_from_fair() to use !p->on_rq instead of
!se->on_rq.
I'm able to cause a task with a priority of 120 to starve all other
tasks with the same priority on an ARM platform running 3.2.51-rt72
PREEMPT RT by writing one character at time to a serial tty (16550 UART)
in a tight loop. I'm also able to verify making this change corrects the
problem on that platform and kernel version.
Signed-off-by: George McCollister <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/sched/fair.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index b051edd..b758706 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -5902,15 +5902,15 @@ static void switched_from_fair(struct rq *rq, struct task_struct *p)
struct cfs_rq *cfs_rq = cfs_rq_of(se);
/*
- * Ensure the task's vruntime is normalized, so that when its
+ * Ensure the task's vruntime is normalized, so that when it's
* switched back to the fair class the enqueue_entity(.flags=0) will
* do the right thing.
*
- * If it was on_rq, then the dequeue_entity(.flags=0) will already
- * have normalized the vruntime, if it was !on_rq, then only when
+ * If it's on_rq, then the dequeue_entity(.flags=0) will already
+ * have normalized the vruntime, if it's !on_rq, then only when
* the task is sleeping will it still have non-normalized vruntime.
*/
- if (!se->on_rq && p->state != TASK_RUNNING) {
+ if (!p->on_rq && p->state != TASK_RUNNING) {
/*
* Fix up our vruntime so that the current sleep doesn't
* cause 'unlimited' sleep bonus.
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Richter <[email protected]>
commit 8987583366ae9e03c306c2b7d73bdb952df1d08d upstream.
Commit 8408dc1c14c1 "firewire: net: use dev_printk API" introduced a
use-after-free in a failure path. fwnet_transmit_packet_failed(ptask)
may free ptask, then the dev_err() call dereferenced it. The fix is
straightforward; simply reorder the two calls.
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Stefan Richter <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/firewire/net.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 6b89598..4af0a7b 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -929,8 +929,6 @@ static void fwnet_write_complete(struct fw_card *card, int rcode,
if (rcode == RCODE_COMPLETE) {
fwnet_transmit_packet_done(ptask);
} else {
- fwnet_transmit_packet_failed(ptask);
-
if (printk_timed_ratelimit(&j, 1000) || rcode != last_rcode) {
dev_err(&ptask->dev->netdev->dev,
"fwnet_write_complete failed: %x (skipped %d)\n",
@@ -938,8 +936,10 @@ static void fwnet_write_complete(struct fw_card *card, int rcode,
errors_skipped = 0;
last_rcode = rcode;
- } else
+ } else {
errors_skipped++;
+ }
+ fwnet_transmit_packet_failed(ptask);
}
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <[email protected]>
commit 143582c6847cb285b361804c613127c25de60ca4 upstream.
Only the first packet is currently handled correctly, but then
all others are assumed to have failed which is problematic. Fix
this, marking them all successful instead (since if they're not
then the firmware will have transmitted them as single frames.)
This fixes the lost packet reporting.
Also do a tiny variable scoping cleanup.
Signed-off-by: Johannes Berg <[email protected]>
[Add the dvm part]
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/iwlwifi/dvm/tx.c | 14 +++++++++-----
drivers/net/wireless/iwlwifi/mvm/tx.c | 18 +++++++++---------
2 files changed, 18 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c
index 42f64b5..adfbe0b 100644
--- a/drivers/net/wireless/iwlwifi/dvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/dvm/tx.c
@@ -1310,8 +1310,6 @@ int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv,
struct iwl_compressed_ba_resp *ba_resp = (void *)pkt->data;
struct iwl_ht_agg *agg;
struct sk_buff_head reclaimed_skbs;
- struct ieee80211_tx_info *info;
- struct ieee80211_hdr *hdr;
struct sk_buff *skb;
int sta_id;
int tid;
@@ -1398,22 +1396,28 @@ int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv,
freed = 0;
skb_queue_walk(&reclaimed_skbs, skb) {
- hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_hdr *hdr = (void *)skb->data;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (ieee80211_is_data_qos(hdr->frame_control))
freed++;
else
WARN_ON_ONCE(1);
- info = IEEE80211_SKB_CB(skb);
iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]);
+ memset(&info->status, 0, sizeof(info->status));
+ /* Packet was transmitted successfully, failures come as single
+ * frames because before failing a frame the firmware transmits
+ * it without aggregation at least once.
+ */
+ info->flags |= IEEE80211_TX_STAT_ACK;
+
if (freed == 1) {
/* this is the first skb we deliver in this batch */
/* put the rate scaling data there */
info = IEEE80211_SKB_CB(skb);
memset(&info->status, 0, sizeof(info->status));
- info->flags |= IEEE80211_TX_STAT_ACK;
info->flags |= IEEE80211_TX_STAT_AMPDU;
info->status.ampdu_ack_len = ba_resp->txed_2_done;
info->status.ampdu_len = ba_resp->txed;
diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index f0e96a9..7252110 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -818,16 +818,12 @@ int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
struct iwl_mvm_ba_notif *ba_notif = (void *)pkt->data;
struct sk_buff_head reclaimed_skbs;
struct iwl_mvm_tid_data *tid_data;
- struct ieee80211_tx_info *info;
struct ieee80211_sta *sta;
struct iwl_mvm_sta *mvmsta;
- struct ieee80211_hdr *hdr;
struct sk_buff *skb;
int sta_id, tid, freed;
-
/* "flow" corresponds to Tx queue */
u16 scd_flow = le16_to_cpu(ba_notif->scd_flow);
-
/* "ssn" is start of block-ack Tx window, corresponds to index
* (in Tx queue's circular buffer) of first TFD/frame in window */
u16 ba_resp_scd_ssn = le16_to_cpu(ba_notif->scd_ssn);
@@ -884,22 +880,26 @@ int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
freed = 0;
skb_queue_walk(&reclaimed_skbs, skb) {
- hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_hdr *hdr = (void *)skb->data;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (ieee80211_is_data_qos(hdr->frame_control))
freed++;
else
WARN_ON_ONCE(1);
- info = IEEE80211_SKB_CB(skb);
iwl_trans_free_tx_cmd(mvm->trans, info->driver_data[1]);
+ memset(&info->status, 0, sizeof(info->status));
+ /* Packet was transmitted successfully, failures come as single
+ * frames because before failing a frame the firmware transmits
+ * it without aggregation at least once.
+ */
+ info->flags |= IEEE80211_TX_STAT_ACK;
+
if (freed == 1) {
/* this is the first skb we deliver in this batch */
/* put the rate scaling data there */
- info = IEEE80211_SKB_CB(skb);
- memset(&info->status, 0, sizeof(info->status));
- info->flags |= IEEE80211_TX_STAT_ACK;
info->flags |= IEEE80211_TX_STAT_AMPDU;
info->status.ampdu_ack_len = ba_notif->txed_2_done;
info->status.ampdu_len = ba_notif->txed;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Li Zefan <[email protected]>
commit 4729583006772b9530404bc1bb7c3aa4a10ffd4d upstream.
I can trigger a lockdep warning:
# mount -t cgroup -o cpuset xxx /cgroup
# mkdir /cgroup/cpuset
# mkdir /cgroup/tmp
# echo 0 > /cgroup/tmp/cpuset.cpus
# echo 0 > /cgroup/tmp/cpuset.mems
# echo 1 > /cgroup/tmp/cpuset.memory_migrate
# echo $$ > /cgroup/tmp/tasks
# echo 1 > /cgruop/tmp/cpuset.mems
===============================
[ INFO: suspicious RCU usage. ]
3.14.0-rc1-0.1-default+ #32 Not tainted
-------------------------------
include/linux/cgroup.h:682 suspicious rcu_dereference_check() usage!
...
[<ffffffff81582174>] dump_stack+0x72/0x86
[<ffffffff810b8f01>] lockdep_rcu_suspicious+0x101/0x140
[<ffffffff81105ba1>] cpuset_migrate_mm+0xb1/0xe0
...
We used to hold cgroup_mutex when calling cpuset_migrate_mm(), but now
we hold cpuset_mutex, which causes task_css() to complain.
This is not a false-positive but a real issue.
Holding cpuset_mutex won't prevent a task from migrating to another
cpuset, and it won't prevent the original task->cgroup from destroying
during this change.
Fixes: 5d21cc2db040 (cpuset: replace cgroup_mutex locking with cpuset internal locking)
Signed-off-by: Li Zefan <[email protected]>
Sigend-off-by: Tejun Heo <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/cpuset.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index b49f24a..84773c7 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -985,12 +985,6 @@ static int update_cpumask(struct cpuset *cs, struct cpuset *trialcs,
* Temporarilly set tasks mems_allowed to target nodes of migration,
* so that the migration code can allocate pages on these nodes.
*
- * Call holding cpuset_mutex, so current's cpuset won't change
- * during this call, as manage_mutex holds off any cpuset_attach()
- * calls. Therefore we don't need to take task_lock around the
- * call to guarantee_online_mems(), as we know no one is changing
- * our task's cpuset.
- *
* While the mm_struct we are migrating is typically from some
* other task, the task_struct mems_allowed that we are hacking
* is for our current task, which must allocate new pages for that
@@ -1007,8 +1001,10 @@ static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from,
do_migrate_pages(mm, from, to, MPOL_MF_MOVE_ALL);
+ rcu_read_lock();
mems_cs = effective_nodemask_cpuset(task_cs(tsk));
guarantee_online_mems(mems_cs, &tsk->mems_allowed);
+ rcu_read_unlock();
}
/*
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Paul E. McKenney" <[email protected]>
commit 5a581b367b5df0531265311fc681c2abd377e5e6 upstream.
According to the C standard 3.4.3p3, overflow of a signed integer results
in undefined behavior. This commit therefore changes the definitions
of time_after(), time_after_eq(), time_after64(), and time_after_eq64()
to avoid this undefined behavior. The trick is that the subtraction
is done using unsigned arithmetic, which according to 6.2.5p9 cannot
overflow because it is defined as modulo arithmetic. This has the added
(though admittedly quite small) benefit of shortening four lines of code
by four characters each.
Note that the C standard considers the cast from unsigned to
signed to be implementation-defined, see 6.3.1.3p3. However, on a
two's-complement system, an implementation that defines anything other
than a reinterpretation of the bits is free to come to me, and I will be
happy to act as a witness for its being committed to an insane asylum.
(Although I have nothing against saturating arithmetic or signals in some
cases, these things really should not be the default when compiling an
operating-system kernel.)
Signed-off-by: Paul E. McKenney <[email protected]>
Cc: John Stultz <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Kevin Easton <[email protected]>
[ paulmck: Included time_after64() and time_after_eq64(), as suggested
by Eric Dumazet, also fixed commit message.]
Reviewed-by: Josh Triplett <[email protected]>
Cc: Ruchi Kandoi <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
include/linux/jiffies.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 97ba4e7..d235e88 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -101,13 +101,13 @@ static inline u64 get_jiffies_64(void)
#define time_after(a,b) \
(typecheck(unsigned long, a) && \
typecheck(unsigned long, b) && \
- ((long)(b) - (long)(a) < 0))
+ ((long)((b) - (a)) < 0))
#define time_before(a,b) time_after(b,a)
#define time_after_eq(a,b) \
(typecheck(unsigned long, a) && \
typecheck(unsigned long, b) && \
- ((long)(a) - (long)(b) >= 0))
+ ((long)((a) - (b)) >= 0))
#define time_before_eq(a,b) time_after_eq(b,a)
/*
@@ -130,13 +130,13 @@ static inline u64 get_jiffies_64(void)
#define time_after64(a,b) \
(typecheck(__u64, a) && \
typecheck(__u64, b) && \
- ((__s64)(b) - (__s64)(a) < 0))
+ ((__s64)((b) - (a)) < 0))
#define time_before64(a,b) time_after64(b,a)
#define time_after_eq64(a,b) \
(typecheck(__u64, a) && \
typecheck(__u64, b) && \
- ((__s64)(a) - (__s64)(b) >= 0))
+ ((__s64)((a) - (b)) >= 0))
#define time_before_eq64(a,b) time_after_eq64(b,a)
#define time_in_range64(a, b, c) \
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Chuansheng Liu <[email protected]>
commit c685689fd24d310343ac33942e9a54a974ae9c43 upstream.
We hit one rare case below:
T1 calling disable_irq(), but hanging at synchronize_irq()
always;
The corresponding irq thread is in sleeping state;
And all CPUs are in idle state;
After analysis, we found there is one possible scenerio which
causes T1 is waiting there forever:
CPU0 CPU1
synchronize_irq()
wait_event()
spin_lock()
atomic_dec_and_test(&threads_active)
insert the __wait into queue
spin_unlock()
if(waitqueue_active)
atomic_read(&threads_active)
wake_up()
Here after inserted the __wait into queue on CPU0, and before
test if queue is empty on CPU1, there is no barrier, it maybe
cause it is not visible for CPU1 immediately, although CPU0 has
updated the queue list.
It is similar for CPU0 atomic_read() threads_active also.
So we'd need one smp_mb() before waitqueue_active.that, but removing
the waitqueue_active() check solves it as wel l and it makes
things simple and clear.
Signed-off-by: Chuansheng Liu <[email protected]>
Cc: Xiaoming Wang <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/irq/manage.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 3e59f95..4c84746 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -802,8 +802,7 @@ static irqreturn_t irq_thread_fn(struct irq_desc *desc,
static void wake_threads_waitq(struct irq_desc *desc)
{
- if (atomic_dec_and_test(&desc->threads_active) &&
- waitqueue_active(&desc->wait_for_threads))
+ if (atomic_dec_and_test(&desc->threads_active))
wake_up(&desc->wait_for_threads);
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislaw Gruszka <[email protected]>
commit 21f8aaee0c62708654988ce092838aa7df4d25d8 upstream.
We check tid->sched without a lock taken on ath_tx_aggr_sleep(). That
is race condition which can result of doing list_del(&tid->list) twice
(second time with poisoned list node) and cause crash like shown below:
[424271.637220] BUG: unable to handle kernel paging request at 00100104
[424271.637328] IP: [<f90fc072>] ath_tx_aggr_sleep+0x62/0xe0 [ath9k]
...
[424271.639953] Call Trace:
[424271.639998] [<f90f6900>] ? ath9k_get_survey+0x110/0x110 [ath9k]
[424271.640083] [<f90f6942>] ath9k_sta_notify+0x42/0x50 [ath9k]
[424271.640177] [<f809cfef>] sta_ps_start+0x8f/0x1c0 [mac80211]
[424271.640258] [<c10f730e>] ? free_compound_page+0x2e/0x40
[424271.640346] [<f809e915>] ieee80211_rx_handlers+0x9d5/0x2340 [mac80211]
[424271.640437] [<c112f048>] ? kmem_cache_free+0x1d8/0x1f0
[424271.640510] [<c1345a84>] ? kfree_skbmem+0x34/0x90
[424271.640578] [<c10fc23c>] ? put_page+0x2c/0x40
[424271.640640] [<c1345a84>] ? kfree_skbmem+0x34/0x90
[424271.640706] [<c1345a84>] ? kfree_skbmem+0x34/0x90
[424271.640787] [<f809dde3>] ? ieee80211_rx_handlers_result+0x73/0x1d0 [mac80211]
[424271.640897] [<f80a07a0>] ieee80211_prepare_and_rx_handle+0x520/0xad0 [mac80211]
[424271.641009] [<f809e22d>] ? ieee80211_rx_handlers+0x2ed/0x2340 [mac80211]
[424271.641104] [<c13846ce>] ? ip_output+0x7e/0xd0
[424271.641182] [<f80a1057>] ieee80211_rx+0x307/0x7c0 [mac80211]
[424271.641266] [<f90fa6ee>] ath_rx_tasklet+0x88e/0xf70 [ath9k]
[424271.641358] [<f80a0f2c>] ? ieee80211_rx+0x1dc/0x7c0 [mac80211]
[424271.641445] [<f90f82db>] ath9k_tasklet+0xcb/0x130 [ath9k]
Bug report:
https://bugzilla.kernel.org/show_bug.cgi?id=70551
Reported-and-tested-by: Max Sydorenko <[email protected]>
Signed-off-by: Stanislaw Gruszka <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/ath/ath9k/xmit.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index ab64683..f0aaeb2 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1318,14 +1318,16 @@ void ath_tx_aggr_sleep(struct ieee80211_sta *sta, struct ath_softc *sc,
for (tidno = 0, tid = &an->tid[tidno];
tidno < IEEE80211_NUM_TIDS; tidno++, tid++) {
- if (!tid->sched)
- continue;
-
ac = tid->ac;
txq = ac->txq;
ath_txq_lock(sc, txq);
+ if (!tid->sched) {
+ ath_txq_unlock(sc, txq);
+ continue;
+ }
+
buffered = !skb_queue_empty(&tid->buf_q);
tid->sched = false;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Stepanov <[email protected]>
commit e7eb65cac0720df8b3946af7f7a9dc363cf0a814 upstream.
Some APs reject STA association request if a listen interval value exceeds
a threshold of 10. Thus, for example, Cisco APs may deny STA associations
returning status code 12 (Association denied due to reason outside the scope
of 802.11 standard) in the association response frame.
Fixing the issue by setting the default IWL_CONN_MAX_LISTEN_INTERVAL value
from 70 to 10.
Signed-off-by: Max Stepanov <[email protected]>
Reviewed-by: Alexander Bondar <[email protected]>
Signed-off-by: Emmanuel Grumbach <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/iwlwifi/mvm/mvm.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 420e82d..a5e34c0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -148,7 +148,7 @@ enum iwl_power_scheme {
IWL_POWER_SCHEME_LP
};
-#define IWL_CONN_MAX_LISTEN_INTERVAL 70
+#define IWL_CONN_MAX_LISTEN_INTERVAL 10
#ifdef CONFIG_IWLWIFI_DEBUGFS
enum iwl_dbgfs_pm_mask {
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Avinash Patil <[email protected]>
commit 4f7ba432202c8330cc03ab959c6228d0de5dc4a3 upstream.
Write io memory to clean PCIe buffer only when PCIe device is
present else this results into crash because of invalid memory
access.
Signed-off-by: Avinash Patil <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/mwifiex/wmm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index fbf0915..03877ec 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -559,7 +559,8 @@ mwifiex_clean_txrx(struct mwifiex_private *priv)
mwifiex_wmm_delete_all_ralist(priv);
memcpy(tos_to_tid, ac_to_tid, sizeof(tos_to_tid));
- if (priv->adapter->if_ops.clean_pcie_ring)
+ if (priv->adapter->if_ops.clean_pcie_ring &&
+ !priv->adapter->surprise_removed)
priv->adapter->if_ops.clean_pcie_ring(priv->adapter);
spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags);
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Markus Pargmann <[email protected]>
commit 66fda75f47dc583f1c187556e9a2c082dd64f8c6 upstream.
There are many places where ops->disable is called directly. Instead we
should use _regulator_do_disable() which also handles gpio regulators.
To be able to use the wrapper function from _regulator_force_disable(),
I moved the _notifier_call_chain() call from _regulator_do_disable() to
_regulator_disable(). This way, _regulator_force_disable() can use
different flags for _notifier_call_chain() without calling it twice.
Signed-off-by: Markus Pargmann <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/regulator/core.c | 34 +++++++++++++---------------------
1 file changed, 13 insertions(+), 21 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index b94784e..40638ca 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1712,8 +1712,6 @@ static int _regulator_do_disable(struct regulator_dev *rdev)
trace_regulator_disable_complete(rdev_get_name(rdev));
- _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
- NULL);
return 0;
}
@@ -1737,6 +1735,8 @@ static int _regulator_disable(struct regulator_dev *rdev)
rdev_err(rdev, "failed to disable\n");
return ret;
}
+ _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
+ NULL);
}
rdev->use_count = 0;
@@ -1789,20 +1789,16 @@ static int _regulator_force_disable(struct regulator_dev *rdev)
{
int ret = 0;
- /* force disable */
- if (rdev->desc->ops->disable) {
- /* ah well, who wants to live forever... */
- ret = rdev->desc->ops->disable(rdev);
- if (ret < 0) {
- rdev_err(rdev, "failed to force disable\n");
- return ret;
- }
- /* notify other consumers that power has been forced off */
- _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
- REGULATOR_EVENT_DISABLE, NULL);
+ ret = _regulator_do_disable(rdev);
+ if (ret < 0) {
+ rdev_err(rdev, "failed to force disable\n");
+ return ret;
}
- return ret;
+ _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
+ REGULATOR_EVENT_DISABLE, NULL);
+
+ return 0;
}
/**
@@ -3803,8 +3799,6 @@ int regulator_suspend_finish(void)
mutex_lock(®ulator_list_mutex);
list_for_each_entry(rdev, ®ulator_list, list) {
- struct regulator_ops *ops = rdev->desc->ops;
-
mutex_lock(&rdev->mutex);
if (rdev->use_count > 0 || rdev->constraints->always_on) {
error = _regulator_do_enable(rdev);
@@ -3813,12 +3807,10 @@ int regulator_suspend_finish(void)
} else {
if (!has_full_constraints)
goto unlock;
- if (!ops->disable)
- goto unlock;
if (!_regulator_is_enabled(rdev))
goto unlock;
- error = ops->disable(rdev);
+ error = _regulator_do_disable(rdev);
if (error)
ret = error;
}
@@ -4008,7 +4000,7 @@ static int __init regulator_init_complete(void)
ops = rdev->desc->ops;
c = rdev->constraints;
- if (!ops->disable || (c && c->always_on))
+ if (c && c->always_on)
continue;
mutex_lock(&rdev->mutex);
@@ -4029,7 +4021,7 @@ static int __init regulator_init_complete(void)
/* We log since this may kill the system if it
* goes wrong. */
rdev_info(rdev, "disabling\n");
- ret = ops->disable(rdev);
+ ret = _regulator_do_disable(rdev);
if (ret != 0) {
rdev_err(rdev, "couldn't disable: %d\n", ret);
}
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Emmanuel Grumbach <[email protected]>
commit 1d147bfa64293b2723c4fec50922168658e613ba upstream.
There is a race between the TX path and the STA wakeup: while
a station is sleeping, mac80211 buffers frames until it wakes
up, then the frames are transmitted. However, the RX and TX
path are concurrent, so the packet indicating wakeup can be
processed while a packet is being transmitted.
This can lead to a situation where the buffered frames list
is emptied on the one side, while a frame is being added on
the other side, as the station is still seen as sleeping in
the TX path.
As a result, the newly added frame will not be send anytime
soon. It might be sent much later (and out of order) when the
station goes to sleep and wakes up the next time.
Additionally, it can lead to the crash below.
Fix all this by synchronising both paths with a new lock.
Both path are not fastpath since they handle PS situations.
In a later patch we'll remove the extra skb queue locks to
reduce locking overhead.
BUG: unable to handle kernel
NULL pointer dereference at 000000b0
IP: [<ff6f1791>] ieee80211_report_used_skb+0x11/0x3e0 [mac80211]
*pde = 00000000
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
EIP: 0060:[<ff6f1791>] EFLAGS: 00210282 CPU: 1
EIP is at ieee80211_report_used_skb+0x11/0x3e0 [mac80211]
EAX: e5900da0 EBX: 00000000 ECX: 00000001 EDX: 00000000
ESI: e41d00c0 EDI: e5900da0 EBP: ebe458e4 ESP: ebe458b0
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 8005003b CR2: 000000b0 CR3: 25a78000 CR4: 000407d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process iperf (pid: 3934, ti=ebe44000 task=e757c0b0 task.ti=ebe44000)
iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command LQ_CMD (#4e), seq: 0x0903, 92 bytes at 3[3]:9
Stack:
e403b32c ebe458c4 00200002 00200286 e403b338 ebe458cc c10960bb e5900da0
ff76a6ec ebe458d8 00000000 e41d00c0 e5900da0 ebe458f0 ff6f1b75 e403b210
ebe4598c ff723dc1 00000000 ff76a6ec e597c978 e403b758 00000002 00000002
Call Trace:
[<ff6f1b75>] ieee80211_free_txskb+0x15/0x20 [mac80211]
[<ff723dc1>] invoke_tx_handlers+0x1661/0x1780 [mac80211]
[<ff7248a5>] ieee80211_tx+0x75/0x100 [mac80211]
[<ff7249bf>] ieee80211_xmit+0x8f/0xc0 [mac80211]
[<ff72550e>] ieee80211_subif_start_xmit+0x4fe/0xe20 [mac80211]
[<c149ef70>] dev_hard_start_xmit+0x450/0x950
[<c14b9aa9>] sch_direct_xmit+0xa9/0x250
[<c14b9c9b>] __qdisc_run+0x4b/0x150
[<c149f732>] dev_queue_xmit+0x2c2/0xca0
Reported-by: Yaara Rozenblum <[email protected]>
Signed-off-by: Emmanuel Grumbach <[email protected]>
Reviewed-by: Stanislaw Gruszka <[email protected]>
[reword commit log, use a separate lock]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/mac80211/sta_info.c | 4 ++++
net/mac80211/sta_info.h | 7 +++----
net/mac80211/tx.c | 15 +++++++++++++++
3 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index aeb967a..662a620 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -340,6 +340,7 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
return NULL;
spin_lock_init(&sta->lock);
+ spin_lock_init(&sta->ps_lock);
INIT_WORK(&sta->drv_unblock_wk, sta_unblock);
INIT_WORK(&sta->ampdu_mlme.work, ieee80211_ba_session_work);
mutex_init(&sta->ampdu_mlme.mtx);
@@ -1049,6 +1050,8 @@ void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
skb_queue_head_init(&pending);
+ /* sync with ieee80211_tx_h_unicast_ps_buf */
+ spin_lock(&sta->ps_lock);
/* Send all buffered frames to the station */
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
int count = skb_queue_len(&pending), tmp;
@@ -1068,6 +1071,7 @@ void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
}
ieee80211_add_pending_skbs_fn(local, &pending, clear_sta_ps_flags, sta);
+ spin_unlock(&sta->ps_lock);
local->total_ps_buffered -= buffered;
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 4208dbd..492d59c 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -245,6 +245,7 @@ struct sta_ampdu_mlme {
* @drv_unblock_wk: used for driver PS unblocking
* @listen_interval: listen interval of this station, when we're acting as AP
* @_flags: STA flags, see &enum ieee80211_sta_info_flags, do not use directly
+ * @ps_lock: used for powersave (when mac80211 is the AP) related locking
* @ps_tx_buf: buffers (per AC) of frames to transmit to this station
* when it leaves power saving state or polls
* @tx_filtered: buffers (per AC) of frames we already tried to
@@ -328,10 +329,8 @@ struct sta_info {
/* use the accessors defined below */
unsigned long _flags;
- /*
- * STA powersave frame queues, no more than the internal
- * locking required.
- */
+ /* STA powersave lock and frame queues */
+ spinlock_t ps_lock;
struct sk_buff_head ps_tx_buf[IEEE80211_NUM_ACS];
struct sk_buff_head tx_filtered[IEEE80211_NUM_ACS];
unsigned long driver_buffered_tids;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index cf8d00a..5d0beec 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -462,6 +462,20 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
sta->sta.addr, sta->sta.aid, ac);
if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER)
purge_old_ps_buffers(tx->local);
+
+ /* sync with ieee80211_sta_ps_deliver_wakeup */
+ spin_lock(&sta->ps_lock);
+ /*
+ * STA woke up the meantime and all the frames on ps_tx_buf have
+ * been queued to pending queue. No reordering can happen, go
+ * ahead and Tx the packet.
+ */
+ if (!test_sta_flag(sta, WLAN_STA_PS_STA) &&
+ !test_sta_flag(sta, WLAN_STA_PS_DRIVER)) {
+ spin_unlock(&sta->ps_lock);
+ return TX_CONTINUE;
+ }
+
if (skb_queue_len(&sta->ps_tx_buf[ac]) >= STA_MAX_TX_BUFFER) {
struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf[ac]);
ps_dbg(tx->sdata,
@@ -475,6 +489,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
info->control.vif = &tx->sdata->vif;
info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
skb_queue_tail(&sta->ps_tx_buf[ac], tx->skb);
+ spin_unlock(&sta->ps_lock);
if (!timer_pending(&local->sta_cleanup))
mod_timer(&local->sta_cleanup,
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Sujith Manoharan <[email protected]>
commit b3050248c167871ca52cfdb2ce78aa2460249346 upstream.
The minimum CCA power threshold values have to be adjusted
for existing cards to be in compliance with new regulations.
Newer cards will make use of the values obtained from EEPROM,
support for this was added earlier. To make sure that cards
that are already in use and don't have proper values in EEPROM,
do not violate regulations, use the initvals instead.
Reported-by: Jeang Daniel <[email protected]>
Signed-off-by: Sujith Manoharan <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
index 092b9d4..1078fbd 100644
--- a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
@@ -56,7 +56,7 @@ static const u32 ar9462_2p0_baseband_postamble[][5] = {
{0x00009e14, 0x37b95d5e, 0x37b9605e, 0x3236605e, 0x32365a5e},
{0x00009e18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
- {0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
+ {0x00009e20, 0x000003a5, 0x000003a5, 0x000003a5, 0x000003a5},
{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
{0x00009e3c, 0xcf946220, 0xcf946220, 0xcfd5c782, 0xcfd5c282},
{0x00009e44, 0x62321e27, 0x62321e27, 0xfe291e27, 0xfe291e27},
@@ -95,7 +95,7 @@ static const u32 ar9462_2p0_baseband_postamble[][5] = {
{0x0000ae04, 0x001c0000, 0x001c0000, 0x001c0000, 0x00100000},
{0x0000ae18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000ae1c, 0x0000019c, 0x0000019c, 0x0000019c, 0x0000019c},
- {0x0000ae20, 0x000001b5, 0x000001b5, 0x000001ce, 0x000001ce},
+ {0x0000ae20, 0x000001a6, 0x000001a6, 0x000001aa, 0x000001aa},
{0x0000b284, 0x00000000, 0x00000000, 0x00000550, 0x00000550},
};
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Markus Pargmann <[email protected]>
commit 30c219710358c5cca2f8bd2e9e547c6aadf7cf8b upstream.
There are some direct ops->enable in the regulator core driver. This is
a potential issue as the function _regulator_do_enable() handles gpio
regulators and the normal ops->enable calls. These gpio regulators are
simply ignored when ops->enable is called directly.
One possible bug is that boot-on and always-on gpio regulators are not
enabled on registration.
This patch replaces all ops->enable calls by _regulator_do_enable.
[Handle missing enable operations -- broonie]
Signed-off-by: Markus Pargmann <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
regulator: Handle invalid enable operation for always/boot on regulators
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/regulator/core.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 288c75a..b94784e 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -919,6 +919,8 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
return 0;
}
+static int _regulator_do_enable(struct regulator_dev *rdev);
+
/**
* set_machine_constraints - sets regulator constraints
* @rdev: regulator source
@@ -975,10 +977,9 @@ static int set_machine_constraints(struct regulator_dev *rdev,
/* If the constraints say the regulator should be on at this point
* and we have control then make sure it is enabled.
*/
- if ((rdev->constraints->always_on || rdev->constraints->boot_on) &&
- ops->enable) {
- ret = ops->enable(rdev);
- if (ret < 0) {
+ if (rdev->constraints->always_on || rdev->constraints->boot_on) {
+ ret = _regulator_do_enable(rdev);
+ if (ret < 0 && ret != -EINVAL) {
rdev_err(rdev, "failed to enable\n");
goto out;
}
@@ -3805,9 +3806,8 @@ int regulator_suspend_finish(void)
struct regulator_ops *ops = rdev->desc->ops;
mutex_lock(&rdev->mutex);
- if ((rdev->use_count > 0 || rdev->constraints->always_on) &&
- ops->enable) {
- error = ops->enable(rdev);
+ if (rdev->use_count > 0 || rdev->constraints->always_on) {
+ error = _regulator_do_enable(rdev);
if (error)
ret = error;
} else {
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <[email protected]>
commit 963a1852fbac4f75a2d938fa2e734ef1e6d4c044 upstream.
The MLME code in mac80211 must track whether or not the AP changed
bandwidth, but if there's no change while tracking it shouldn't do
anything, otherwise regulatory updates can make it impossible to
connect to certain APs if the regulatory database doesn't match the
information from the AP. See the precise scenario described in the
code.
This still leaves some possible problems with CSA or if the AP
actually changed bandwidth, but those cases are less common and
won't completely prevent using it.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=70881
Reported-and-tested-by: Nate Carlson <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/mac80211/mlme.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 7a98d52..59f69fd 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -331,6 +331,28 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
ret = 0;
out:
+ /*
+ * When tracking the current AP, don't do any further checks if the
+ * new chandef is identical to the one we're currently using for the
+ * connection. This keeps us from playing ping-pong with regulatory,
+ * without it the following can happen (for example):
+ * - connect to an AP with 80 MHz, world regdom allows 80 MHz
+ * - AP advertises regdom US
+ * - CRDA loads regdom US with 80 MHz prohibited (old database)
+ * - the code below detects an unsupported channel, downgrades, and
+ * we disconnect from the AP in the caller
+ * - disconnect causes CRDA to reload world regdomain and the game
+ * starts anew.
+ * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
+ *
+ * It seems possible that there are still scenarios with CSA or real
+ * bandwidth changes where a this could happen, but those cases are
+ * less common and wouldn't completely prevent using the AP.
+ */
+ if (tracking &&
+ cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef))
+ return ret;
+
/* don't print the message below for VHT mismatch if VHT is disabled */
if (ret & IEEE80211_STA_DISABLE_VHT)
vht_chandef = *chandef;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Emmanuel Grumbach <[email protected]>
commit ec6f678c74dbdb06a6a775bbb00f1d26c17c404b upstream.
We set IWL_STA_UCODE_INPROGRESS flag when we add a station
and clear it when we send the LQ command for it. But the LQ
command is sent only when the association succeeds.
If the association doesn't succeed, we would leave this flag
set and that wouldn't indicate the station entry as vacant.
This probably fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1065663
Reviewed-by: Johannes Berg <[email protected]>
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/iwlwifi/dvm/sta.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c
index c3c13ce..e800002 100644
--- a/drivers/net/wireless/iwlwifi/dvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/dvm/sta.c
@@ -590,6 +590,7 @@ void iwl_deactivate_station(struct iwl_priv *priv, const u8 sta_id,
sizeof(priv->tid_data[sta_id][tid]));
priv->stations[sta_id].used &= ~IWL_STA_DRIVER_ACTIVE;
+ priv->stations[sta_id].used &= ~IWL_STA_UCODE_INPROGRESS;
priv->num_stations--;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <[email protected]>
commit 1bf4bbb4024dcdab5e57634dd8ae1072d42a53ac upstream.
Improves reliability of wifi connections with WPA, since authentication
frames are prioritized over normal traffic and also typically exempt
from aggregation.
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/mac80211/wme.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index afba19c..a282fdd 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -153,6 +153,11 @@ u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
return IEEE80211_AC_BE;
}
+ if (skb->protocol == sdata->control_port_protocol) {
+ skb->priority = 7;
+ return ieee80211_downgrade_queue(sdata, skb);
+ }
+
/* use the data classifier to determine what 802.1d tag the
* data frame has */
skb->priority = cfg80211_classify8021d(skb);
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Amitkumar Karwar <[email protected]>
commit 1c97560f6d751a620978504a4a888c631192b71a upstream.
We are sending sleep confirm done interrupt in the middle of
sleep handshake. There is a corner case when Tx done interrupt
is received from firmware during sleep handshake due to which
host and firmware power states go out of sync causing cmd and
Tx data timeout problem.
Hence sleep confirm done interrupt is sent at the end of sleep
handshake to fix the problem.
Signed-off-by: Amitkumar Karwar <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/mwifiex/pcie.c | 28 +++++++++++-----------------
1 file changed, 11 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index 1662b99..801c709 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -1515,6 +1515,14 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter)
if (adapter->ps_state == PS_STATE_SLEEP_CFM) {
mwifiex_process_sleep_confirm_resp(adapter, skb->data,
skb->len);
+ mwifiex_pcie_enable_host_int(adapter);
+ if (mwifiex_write_reg(adapter,
+ PCIE_CPU_INT_EVENT,
+ CPU_INTR_SLEEP_CFM_DONE)) {
+ dev_warn(adapter->dev,
+ "Write register failed\n");
+ return -1;
+ }
while (reg->sleep_cookie && (count++ < 10) &&
mwifiex_pcie_ok_to_access_hw(adapter))
usleep_range(50, 60);
@@ -1985,23 +1993,9 @@ static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter)
adapter->int_status |= pcie_ireg;
spin_unlock_irqrestore(&adapter->int_lock, flags);
- if (pcie_ireg & HOST_INTR_CMD_DONE) {
- if ((adapter->ps_state == PS_STATE_SLEEP_CFM) ||
- (adapter->ps_state == PS_STATE_SLEEP)) {
- mwifiex_pcie_enable_host_int(adapter);
- if (mwifiex_write_reg(adapter,
- PCIE_CPU_INT_EVENT,
- CPU_INTR_SLEEP_CFM_DONE)
- ) {
- dev_warn(adapter->dev,
- "Write register failed\n");
- return;
-
- }
- }
- } else if (!adapter->pps_uapsd_mode &&
- adapter->ps_state == PS_STATE_SLEEP &&
- mwifiex_pcie_ok_to_access_hw(adapter)) {
+ if (!adapter->pps_uapsd_mode &&
+ adapter->ps_state == PS_STATE_SLEEP &&
+ mwifiex_pcie_ok_to_access_hw(adapter)) {
/* Potentially for PCIe we could get other
* interrupts like shared. Don't change power
* state until cookie is set */
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Clemens Ladisch <[email protected]>
commit 1f91ecc14deea9461aca93273d78871ec4d98fcd upstream.
When selecting the audio output destinations (headphones, FP headphones,
multichannel output), unnecessary I2S channels are digitally muted to
avoid invalid signal levels on the other outputs.
Signed-off-by: Roman Volkov <[email protected]>
Signed-off-by: Clemens Ladisch <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/pci/oxygen/xonar_dg.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/sound/pci/oxygen/xonar_dg.c b/sound/pci/oxygen/xonar_dg.c
index 5519b8f..eb7ad77 100644
--- a/sound/pci/oxygen/xonar_dg.c
+++ b/sound/pci/oxygen/xonar_dg.c
@@ -294,6 +294,16 @@ static int output_switch_put(struct snd_kcontrol *ctl,
oxygen_write16_masked(chip, OXYGEN_GPIO_DATA,
data->output_sel == 1 ? GPIO_HP_REAR : 0,
GPIO_HP_REAR);
+ oxygen_write8_masked(chip, OXYGEN_PLAY_ROUTING,
+ data->output_sel == 0 ?
+ OXYGEN_PLAY_MUTE01 :
+ OXYGEN_PLAY_MUTE23 |
+ OXYGEN_PLAY_MUTE45 |
+ OXYGEN_PLAY_MUTE67,
+ OXYGEN_PLAY_MUTE01 |
+ OXYGEN_PLAY_MUTE23 |
+ OXYGEN_PLAY_MUTE45 |
+ OXYGEN_PLAY_MUTE67);
}
mutex_unlock(&chip->mutex);
return changed;
--
1.9.1
3.11.10.7 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Rob Herring <[email protected]>
commit a56a5cf1f2ec895599eace0ac6eba1e4a489e4bf upstream.
While Midway firmware handles L2 smc calls as nops, the custom smc calls
present a problem when running virtualized Midway guest. They aren't
needed so just avoid calling them.
In the process, cleanup the L2X0 ifdefs and use IS_ENABLED instead.
Signed-off-by: Rob Herring <[email protected]>
Cc: Ian Campbell <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/mach-highbank/highbank.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 4a929a2..f283f1c 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -68,14 +68,12 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr)
HB_JUMP_TABLE_PHYS(cpu) + 15);
}
-#ifdef CONFIG_CACHE_L2X0
static void highbank_l2x0_disable(void)
{
outer_flush_all();
/* Disable PL310 L2 Cache controller */
highbank_smc1(0x102, 0x0);
}
-#endif
static void __init highbank_init_irq(void)
{
@@ -84,12 +82,13 @@ static void __init highbank_init_irq(void)
if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
highbank_scu_map_io();
-#ifdef CONFIG_CACHE_L2X0
/* Enable PL310 L2 Cache controller */
- highbank_smc1(0x102, 0x1);
- l2x0_of_init(0, ~0UL);
- outer_cache.disable = highbank_l2x0_disable;
-#endif
+ if (IS_ENABLED(CONFIG_CACHE_L2X0) &&
+ of_find_compatible_node(NULL, NULL, "arm,pl310-cache")) {
+ highbank_smc1(0x102, 0x1);
+ l2x0_of_init(0, ~0UL);
+ outer_cache.disable = highbank_l2x0_disable;
+ }
}
static void __init highbank_timer_init(void)
--
1.9.1