From: "Ivan T. Ivanov" <[email protected]>
Put the transceiver in non-driving mode. Otherwise host
may not detect soft-disconnection.
Signed-off-by: Ivan T. Ivanov <[email protected]>
Cc: Pavankumar Kondeti <[email protected]>
---
drivers/usb/phy/phy-msm-usb.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 729c06b..a89d966 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -235,6 +235,23 @@ static void ulpi_init(struct msm_otg *motg)
}
}
+static int msm_phy_notify_disconnect(struct usb_phy *phy,
+ enum usb_device_speed speed)
+{
+ int val;
+
+ /*
+ * Put the transceiver in non-driving mode. Otherwise host
+ * may not detect soft-disconnection.
+ */
+ val = ulpi_read(phy, ULPI_FUNC_CTRL);
+ val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
+ val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+ ulpi_write(phy, val, ULPI_FUNC_CTRL);
+
+ return 0;
+}
+
static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
{
int ret;
@@ -1623,6 +1640,7 @@ static int msm_otg_probe(struct platform_device *pdev)
phy->init = msm_phy_init;
phy->set_power = msm_otg_set_power;
+ phy->notify_disconnect = msm_phy_notify_disconnect;
phy->io_ops = &msm_otg_io_ops;
--
1.8.3.2