2014-04-29 19:42:34

by Alexey Charkov

[permalink] [raw]
Subject: [PATCH] pinctrl: vt8500: Ensure value reg is updated when setting direction

Current code only touches the direction register when setting direction
to output, which breaks logic like

echo high > /sys/class/gpio/gpio0/direction

which is expected to also set the value. This patch also adds a call
to update the value register when setting direction to output.

Signed-off-by: Alexey Charkov <[email protected]>
---
drivers/pinctrl/vt8500/pinctrl-wmt.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c
index 9802b67..2c61281 100644
--- a/drivers/pinctrl/vt8500/pinctrl-wmt.c
+++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c
@@ -523,17 +523,6 @@ static int wmt_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
return GPIOF_DIR_IN;
}

-static int wmt_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- return pinctrl_gpio_direction_input(chip->base + offset);
-}
-
-static int wmt_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- return pinctrl_gpio_direction_output(chip->base + offset);
-}
-
static int wmt_gpio_get_value(struct gpio_chip *chip, unsigned offset)
{
struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev);
@@ -568,6 +557,18 @@ static void wmt_gpio_set_value(struct gpio_chip *chip, unsigned offset,
wmt_clearbits(data, reg_data_out, BIT(bit));
}

+static int wmt_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_gpio_direction_input(chip->base + offset);
+}
+
+static int wmt_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ wmt_gpio_set_value(chip, offset, value);
+ return pinctrl_gpio_direction_output(chip->base + offset);
+}
+
static struct gpio_chip wmt_gpio_chip = {
.label = "gpio-wmt",
.owner = THIS_MODULE,
--
1.9.1


2014-04-30 08:21:45

by Tony Prisk

[permalink] [raw]
Subject: Re: [PATCH] pinctrl: vt8500: Ensure value reg is updated when setting direction


On 30/04/14 07:42, Alexey Charkov wrote:
> Current code only touches the direction register when setting direction
> to output, which breaks logic like
>
> echo high > /sys/class/gpio/gpio0/direction
>
> which is expected to also set the value. This patch also adds a call
> to update the value register when setting direction to output.
>
> Signed-off-by: Alexey Charkov <[email protected]>
> ---
> drivers/pinctrl/vt8500/pinctrl-wmt.c | 23 ++++++++++++-----------
> 1 file changed, 12 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c
> index 9802b67..2c61281 100644
> --- a/drivers/pinctrl/vt8500/pinctrl-wmt.c
> +++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c
> @@ -523,17 +523,6 @@ static int wmt_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
> return GPIOF_DIR_IN;
> }
>
> -static int wmt_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
> -{
> - return pinctrl_gpio_direction_input(chip->base + offset);
> -}
> -
> -static int wmt_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
> - int value)
> -{
> - return pinctrl_gpio_direction_output(chip->base + offset);
> -}
> -
> static int wmt_gpio_get_value(struct gpio_chip *chip, unsigned offset)
> {
> struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev);
> @@ -568,6 +557,18 @@ static void wmt_gpio_set_value(struct gpio_chip *chip, unsigned offset,
> wmt_clearbits(data, reg_data_out, BIT(bit));
> }
>
> +static int wmt_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
> +{
> + return pinctrl_gpio_direction_input(chip->base + offset);
> +}
> +
> +static int wmt_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
> + int value)
> +{
> + wmt_gpio_set_value(chip, offset, value);
> + return pinctrl_gpio_direction_output(chip->base + offset);
> +}
> +
> static struct gpio_chip wmt_gpio_chip = {
> .label = "gpio-wmt",
> .owner = THIS_MODULE,

Acked-by: Tony Prisk <[email protected]>

Didn't notice that this was an option in the gpio documentation but it
makes obvious sense.
Regards
Tony P