From: Preston Fick <[email protected]>
This `usb_reset_device` command has been around since the driver was
originally reverse engineered. It doesn't cause much issue on single
interface CP210x devices, but on the CP2105 and CP2108 with 2 and 4
interfaces respectively it will cause instability on enumeration and
delays enumeration noticably. There should be no reason to reset a device
at startup, per the CP210x AN571 spec.
Signed-off-by: Preston Fick <[email protected]>
---
drivers/usb/serial/cp210x.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 762e4a5..6891269 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -855,9 +855,6 @@ static int cp210x_startup(struct usb_serial *serial)
struct usb_host_interface *cur_altsetting;
struct cp210x_serial_private *spriv;
- /* cp210x buffers behave strangely unless device is reset */
- usb_reset_device(serial->dev);
-
spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
if (!spriv)
return -ENOMEM;
--
1.9.1