2014-07-19 17:34:50

by Corentin Labbe

[permalink] [raw]
Subject: [PATCH] staging: sep: Fix issues reported by checkpatch

Hello

The drivers/staging/sep/sep_main.c have lots of checkpatch issue.
This patch series solves them and since there are many, I have splitted corrections in 4 patch.

Note that this work is done for the Eudyptulla Challenge.

Best regards


2014-07-19 17:34:52

by Corentin Labbe

[permalink] [raw]
Subject: [PATCH 1/4] staging: sep: Solves some problems reported by checkpatch

Signed-off-by: LABBE Corentin <[email protected]>
---
drivers/staging/sep/sep_main.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
index 75ca15e..177e4b9 100644
--- a/drivers/staging/sep/sep_main.c
+++ b/drivers/staging/sep/sep_main.c
@@ -155,7 +155,7 @@ struct sep_queue_info *sep_queue_status_add(
unsigned long lck_flags;
struct sep_queue_info *my_elem = NULL;

- my_elem = kzalloc(sizeof(struct sep_queue_info), GFP_KERNEL);
+ my_elem = kzalloc(sizeof(*my_elem), GFP_KERNEL);

if (!my_elem)
return NULL;
@@ -1006,8 +1006,8 @@ static int sep_crypto_dma(
return -ENOMEM;
}

- sep_dma = kmalloc(sizeof(struct sep_dma_map) *
- count_mapped, GFP_ATOMIC);
+ sep_dma = kmalloc_array(count_mapped, sizeof(struct sep_dma_map),
+ GFP_ATOMIC);

if (sep_dma == NULL) {
dev_dbg(&sep->pdev->dev, "Cannot allocate dma_maps\n");
@@ -1070,7 +1070,8 @@ static int sep_crypto_lli(

sep_map = *maps;

- sep_lli = kmalloc(sizeof(struct sep_lli_entry) * nbr_ents, GFP_ATOMIC);
+ sep_lli = kmalloc_array(nbr_ents, sizeof(struct sep_lli_entry),
+ GFP_ATOMIC);

if (sep_lli == NULL) {
dev_dbg(&sep->pdev->dev, "Cannot allocate lli_maps\n");
@@ -3398,7 +3399,7 @@ static ssize_t sep_create_dcb_dmatables_context(struct sep_device *sep,
}

/* Allocate thread-specific memory for DCB */
- *dcb_region = kzalloc(num_dcbs * sizeof(struct sep_dcblock),
+ *dcb_region = kcalloc(num_dcbs, sizeof(struct sep_dcblock),
GFP_KERNEL);
if (!(*dcb_region)) {
error = -ENOMEM;
@@ -3480,7 +3481,7 @@ int sep_create_dcb_dmatables_context_kernel(struct sep_device *sep,
current->pid, num_dcbs);

/* Allocate thread-specific memory for DCB */
- *dcb_region = kzalloc(num_dcbs * sizeof(struct sep_dcblock),
+ *dcb_region = kcalloc(num_dcbs, sizeof(struct sep_dcblock),
GFP_KERNEL);
if (!(*dcb_region)) {
error = -ENOMEM;
@@ -4090,7 +4091,7 @@ static int sep_probe(struct pci_dev *pdev,
}

/* Allocate the sep_device structure for this device */
- sep_dev = kzalloc(sizeof(struct sep_device), GFP_ATOMIC);
+ sep_dev = kzalloc(sizeof(*sep_dev), GFP_ATOMIC);
if (sep_dev == NULL) {
error = -ENOMEM;
goto end_function_disable_device;
--
1.8.5.5

2014-07-19 17:34:59

by Corentin Labbe

[permalink] [raw]
Subject: [PATCH 2/4] staging: sep: No else is necessary after a break (reported by checkpatch)

Signed-off-by: LABBE Corentin <[email protected]>
---
drivers/staging/sep/sep_main.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
index 177e4b9..1580d95f 100644
--- a/drivers/staging/sep/sep_main.c
+++ b/drivers/staging/sep/sep_main.c
@@ -2881,12 +2881,11 @@ static int sep_free_dma_tables_and_dcb(struct sep_device *sep, bool isapplet,
if (is_kva) {
error = -ENODEV;
break;
- } else {
- error_temp = copy_to_user(
+ }
+ error_temp = copy_to_user(
(void __user *)tail_pt,
dcb_table_ptr->tail_data,
dcb_table_ptr->tail_data_size);
- }
if (error_temp) {
/* Release the DMA resource */
error = -EFAULT;
--
1.8.5.5

2014-07-19 17:34:57

by Corentin Labbe

[permalink] [raw]
Subject: [PATCH 3/4] staging: sep: Fix misceanellous problems reported by checkpatch

Signed-off-by: LABBE Corentin <[email protected]>
---
drivers/staging/sep/sep_main.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
index 1580d95f..6f98881 100644
--- a/drivers/staging/sep/sep_main.c
+++ b/drivers/staging/sep/sep_main.c
@@ -130,7 +130,6 @@ void sep_queue_status_remove(struct sep_device *sep,

dev_dbg(&sep->pdev->dev, "[PID%d] sep_queue_status_remove return\n",
current->pid);
- return;
}

/**
@@ -1737,7 +1736,7 @@ static void sep_debug_print_lli_tables(struct sep_device *sep,
return;
}

- while ((unsigned long) lli_table_ptr->bus_address != 0xffffffff) {
+ while ((unsigned long)lli_table_ptr->bus_address != 0xffffffff) {
dev_dbg(&sep->pdev->dev,
"[PID%d] lli table %08lx, table_data_size is (hex) %lx\n",
current->pid, table_count, table_data_size);
@@ -1752,7 +1751,7 @@ static void sep_debug_print_lli_tables(struct sep_device *sep,
dev_dbg(&sep->pdev->dev,
"[PID%d] lli_table_ptr address is %08lx\n",
current->pid,
- (unsigned long) lli_table_ptr);
+ (unsigned long)lli_table_ptr);

dev_dbg(&sep->pdev->dev,
"[PID%d] phys address is %08lx block size is (hex) %x\n",
--
1.8.5.5

2014-07-19 17:35:42

by Corentin Labbe

[permalink] [raw]
Subject: [PATCH 4/4] staging: sep: Fix blank lines issue reported by checkpatch

Signed-off-by: LABBE Corentin <[email protected]>
---
drivers/staging/sep/sep_main.c | 47 ++++--------------------------------------
1 file changed, 4 insertions(+), 43 deletions(-)

diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
index 6f98881..89a1d53 100644
--- a/drivers/staging/sep/sep_main.c
+++ b/drivers/staging/sep/sep_main.c
@@ -492,7 +492,6 @@ int sep_free_dma_table_data_handler(struct sep_device *sep,
* memory is not available to the o/s at all.
*/
if (!(*dma_ctx)->secure_dma && dma->out_map_array) {
-
for (count = 0; count < dma->out_num_pages; count++) {
dma_unmap_page(&sep->pdev->dev,
dma->out_map_array[count].dma_addr,
@@ -513,7 +512,6 @@ int sep_free_dma_table_data_handler(struct sep_device *sep,

/* Again, we do this only for non secure dma */
if (!(*dma_ctx)->secure_dma && dma->out_page_array) {
-
for (count = 0; count < dma->out_num_pages; count++) {
if (!PageReserved(dma->out_page_array[count]))

@@ -633,7 +631,6 @@ static int sep_end_transaction_handler(struct sep_device *sep,
return 0;
}

-
/**
* sep_release - close a SEP device
* @inode: inode of SEP device
@@ -766,7 +763,6 @@ static unsigned int sep_poll(struct file *filp, poll_table *wait)
goto end_function;
}

-
/* Add the event to the polling wait table */
dev_dbg(&sep->pdev->dev, "[PID%d] poll: calling wait sep_event\n",
current->pid);
@@ -856,7 +852,6 @@ static unsigned long sep_set_time(struct sep_device *sep)
struct timeval time;
u32 *time_addr; /* Address of time as seen by the kernel */

-
do_gettimeofday(&time);

/* Set value in the SYSTEM MEMORY offset */
@@ -905,7 +900,6 @@ int sep_send_command_handler(struct sep_device *sep)
msg_pool += 1;
if ((*msg_pool < 2) ||
(*msg_pool > SEP_DRIVER_MAX_MESSAGE_SIZE_IN_BYTES)) {
-
dev_warn(&sep->pdev->dev, "invalid message size\n");
error = -EPROTO;
goto end_function;
@@ -1023,7 +1017,6 @@ static int sep_crypto_dma(

*dma_maps = sep_dma;
return count_mapped;
-
}

/**
@@ -1053,7 +1046,6 @@ static int sep_crypto_lli(
u32 data_size,
enum dma_data_direction direction)
{
-
int ct1;
struct sep_lli_entry *sep_lli;
struct sep_dma_map *sep_map;
@@ -1318,7 +1310,6 @@ static int sep_lock_user_pages(struct sep_device *sep,
(unsigned long)lli_array[0].bus_address,
lli_array[0].block_size);

-
/* Check the size of the last page */
if (num_pages > 1) {
lli_array[num_pages - 1].block_size =
@@ -1663,7 +1654,6 @@ static void sep_build_lli_table(struct sep_device *sep,

/* Set the output parameter */
*num_processed_entries_ptr += array_counter;
-
}

/**
@@ -1747,7 +1737,6 @@ static void sep_debug_print_lli_tables(struct sep_device *sep,
/* Print entries of the table (without info entry) */
for (entries_count = 0; entries_count < num_table_entries;
entries_count++, lli_table_ptr++) {
-
dev_dbg(&sep->pdev->dev,
"[PID%d] lli_table_ptr address is %08lx\n",
current->pid,
@@ -1773,7 +1762,6 @@ static void sep_debug_print_lli_tables(struct sep_device *sep,
current->pid,
(unsigned long)lli_table_ptr->bus_address);

-
table_data_size = lli_table_ptr->block_size & 0xffffff;
num_table_entries = (lli_table_ptr->block_size >> 24) & 0xff;

@@ -1796,7 +1784,6 @@ static void sep_debug_print_lli_tables(struct sep_device *sep,
#endif
}

-
/**
* sep_prepare_empty_lli_table - create a blank LLI table
* @sep: pointer to struct sep_device
@@ -1972,7 +1959,6 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,

/* Loop till all the entries in in array are processed */
while (current_entry < sep_lli_entries) {
-
/* Set the new input and output tables */
in_lli_table_ptr =
(struct sep_lli_entry *)lli_table_alloc_addr;
@@ -1988,10 +1974,8 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,
((void *)sep->shared_addr +
SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES)) {
-
error = -ENOMEM;
goto end_function_error;
-
}

/* Update the number of created tables */
@@ -2022,7 +2006,6 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,
&current_entry, &num_entries_in_table, table_data_size);

if (info_entry_ptr == NULL) {
-
/* Set the output parameters to physical addresses */
*lli_table_ptr = sep_shared_area_virt_to_bus(sep,
dma_in_lli_table_ptr);
@@ -2071,7 +2054,6 @@ end_function_error:

end_function:
return error;
-
}

/**
@@ -2193,7 +2175,6 @@ static int sep_construct_dma_tables_from_lli(
((void *)sep->shared_addr +
SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES)) {
-
dev_warn(&sep->pdev->dev, "dma table limit overrun\n");
return -ENOMEM;
}
@@ -2450,10 +2431,7 @@ static int sep_prepare_input_output_dma_table(struct sep_device *sep,

goto end_function_free_lli_in;
}
-
- }
-
- else {
+ } else {
dev_dbg(&sep->pdev->dev, "[PID%d] Locking user input pages\n",
current->pid);
error = sep_lock_user_pages(sep, app_virt_in_addr,
@@ -2554,7 +2532,6 @@ end_function_with_error:
dma_ctx->dma_res_arr[dma_ctx->nr_dcb_creat].out_page_array = NULL;
kfree(lli_out_array);

-
end_function_free_lli_in:
kfree(dma_ctx->dma_res_arr[dma_ctx->nr_dcb_creat].in_map_array);
dma_ctx->dma_res_arr[dma_ctx->nr_dcb_creat].in_map_array = NULL;
@@ -2563,9 +2540,7 @@ end_function_free_lli_in:
kfree(lli_in_array);

end_function:
-
return error;
-
}

/**
@@ -2703,7 +2678,6 @@ int sep_prepare_input_output_dma_table_in_dcb(struct sep_device *sep,
dcb_table_ptr->out_vr_tail_pt = 0;

if (isapplet) {
-
/* Check if there is enough data for DMA operation */
if (data_in_size < SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE) {
if (is_kva) {
@@ -2829,10 +2803,8 @@ end_function_error:

end_function:
return error;
-
}

-
/**
* sep_free_dma_tables_and_dcb - free DMA tables and DCBs
* @sep: pointer to struct sep_device
@@ -2963,7 +2935,6 @@ static int sep_prepare_dcb_handler(struct sep_device *sep, unsigned long arg,

end_function:
return error;
-
}

/**
@@ -3167,7 +3138,6 @@ static irqreturn_t sep_inthandler(int irq, void *dev_id)
dev_dbg(&sep->pdev->dev, "sep int: IRR REG val: %x\n", reg_val);

if (reg_val & (0x1 << 13)) {
-
/* Lock and update the counter of reply messages */
spin_lock_irqsave(&sep->snd_rply_lck, lock_irq_flag);
sep->reply_ct++;
@@ -3244,8 +3214,9 @@ static int sep_reconfig_shared_area(struct sep_device *sep)
dev_warn(&sep->pdev->dev, "could not reconfig shared area\n");
dev_warn(&sep->pdev->dev, "result was %x\n", ret_val);
ret_val = -ENOMEM;
- } else
+ } else {
ret_val = 0;
+ }

dev_dbg(&sep->pdev->dev, "reconfig shared area end\n");

@@ -3432,7 +3403,6 @@ static ssize_t sep_create_dcb_dmatables_context(struct sep_device *sep,
end_function:
kfree(dcb_args);
return error;
-
}

/**
@@ -3511,7 +3481,6 @@ int sep_create_dcb_dmatables_context_kernel(struct sep_device *sep,

end_function:
return error;
-
}

/**
@@ -3590,7 +3559,6 @@ end_function:
return error;
}

-
/**
* sep_read - Returns results of an operation for fastcall interface
* @filp: File pointer
@@ -3638,7 +3606,6 @@ static ssize_t sep_read(struct file *filp,
goto end_function_error;
}

-
/* Wait for SEP to finish */
wait_event(sep->event_interrupt,
test_bit(SEP_WORKING_LOCK_BIT,
@@ -3711,7 +3678,6 @@ static inline ssize_t sep_fastcall_args_get(struct sep_device *sep,
goto end_function;
}

-
if (copy_from_user(args, buf_user, sizeof(struct sep_fastcall_hdr))) {
error = -EFAULT;
goto end_function;
@@ -3813,7 +3779,6 @@ static ssize_t sep_write(struct file *filp,
goto end_function_error;
}

-
/*
* Prepare contents of the shared area regions for
* the operation into temporary buffers
@@ -3923,6 +3888,7 @@ end_function:

return error;
}
+
/**
* sep_seek - Handler for seek system call
* @filp: File pointer
@@ -3937,8 +3903,6 @@ static loff_t sep_seek(struct file *filp, loff_t offset, int origin)
return -ENOSYS;
}

-
-
/**
* sep_file_operations - file operation on sep device
* @sep_ioctl: ioctl handler from user space call
@@ -3991,7 +3955,6 @@ sep_sysfs_read(struct file *filp, struct kobject *kobj,
if (queue_num > SEP_DOUBLEBUF_USERS_LIMIT)
queue_num = SEP_DOUBLEBUF_USERS_LIMIT;

-
if (count < sizeof(queue_num)
+ (queue_num * sizeof(struct sep_queue_data))) {
spin_unlock_irqrestore(&sep->sep_queue_lock, lck_flags);
@@ -4061,7 +4024,6 @@ static int sep_register_driver_with_fs(struct sep_device *sep)
return ret_val;
}

-
/**
*sep_probe - probe a matching PCI device
*@pdev: pci_device
@@ -4352,7 +4314,6 @@ static int sep_pci_suspend(struct device *dev)
*/
static int sep_pm_runtime_resume(struct device *dev)
{
-
u32 retval2;
u32 delay_count;
struct sep_device *sep = sep_dev;
--
1.8.5.5

2014-07-19 18:00:34

by Joe Perches

[permalink] [raw]
Subject: Re: [PATCH 2/4] staging: sep: No else is necessary after a break (reported by checkpatch)

(Adding Mark Allyn and Jayant Mangalampalli)

Is this still project still active?

On Sat, 2014-07-19 at 19:34 +0200, LABBE Corentin wrote:
> Signed-off-by: LABBE Corentin <[email protected]>
> ---
> drivers/staging/sep/sep_main.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
> index 177e4b9..1580d95f 100644
> --- a/drivers/staging/sep/sep_main.c
> +++ b/drivers/staging/sep/sep_main.c
> @@ -2881,12 +2881,11 @@ static int sep_free_dma_tables_and_dcb(struct sep_device *sep, bool isapplet,
> if (is_kva) {
> error = -ENODEV;
> break;
> - } else {
> - error_temp = copy_to_user(
> + }
> + error_temp = copy_to_user(
> (void __user *)tail_pt,
> dcb_table_ptr->tail_data,
> dcb_table_ptr->tail_data_size);
> - }
> if (error_temp) {
> /* Release the DMA resource */
> error = -EFAULT;

It'd be probably be better to rewrite the code to unindent
a level by using continue. Something like below:

btw:

the is_kva test looks very odd and should probably be
moved outside the loop.

pt_hold should probably be void * not unsigned long
as it loses high order bits on x86-32.

definition:
aligned_u64 out_vr_tail_pt;
use:
+ pt_hold = (unsigned long)dcb_table_ptr->
+ out_vr_tail_pt;

---
drivers/staging/sep/sep_main.c | 37 +++++++++++++++++--------------------
1 file changed, 17 insertions(+), 20 deletions(-)

diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
index 75ca15e..24b4a54 100644
--- a/drivers/staging/sep/sep_main.c
+++ b/drivers/staging/sep/sep_main.c
@@ -2871,26 +2871,23 @@ static int sep_free_dma_tables_and_dcb(struct sep_device *sep, bool isapplet,
* Go over each DCB and see if
* tail pointer must be updated
*/
- for (i = 0; i < (*dma_ctx)->nr_dcb_creat;
- i++, dcb_table_ptr++) {
- if (dcb_table_ptr->out_vr_tail_pt) {
- pt_hold = (unsigned long)dcb_table_ptr->
- out_vr_tail_pt;
- tail_pt = (void *)pt_hold;
- if (is_kva) {
- error = -ENODEV;
- break;
- } else {
- error_temp = copy_to_user(
- (void __user *)tail_pt,
- dcb_table_ptr->tail_data,
- dcb_table_ptr->tail_data_size);
- }
- if (error_temp) {
- /* Release the DMA resource */
- error = -EFAULT;
- break;
- }
+ for (i = 0; i < (*dma_ctx)->nr_dcb_creat; i++, dcb_table_ptr++) {
+ if (!dcb_table_ptr->out_vr_tail_pt)
+ continue;
+ pt_hold = (unsigned long)dcb_table_ptr->
+ out_vr_tail_pt;
+ tail_pt = (void *)pt_hold;
+ if (is_kva) {
+ error = -ENODEV;
+ break;
+ }
+ error_temp = copy_to_user((void __user *)tail_pt,
+ dcb_table_ptr->tail_data,
+ dcb_table_ptr->tail_data_size);
+ if (error_temp) {
+ /* Release the DMA resource */
+ error = -EFAULT;
+ break;
}
}
}

2014-07-20 06:40:13

by Corentin Labbe

[permalink] [raw]
Subject: Re: [PATCH 2/4] staging: sep: No else is necessary after a break (reported by checkpatch)

Le 19/07/2014 20:00, Joe Perches a ?crit :
> (Adding Mark Allyn and Jayant Mangalampalli)
>
> Is this still project still active?

I do not know

>
> On Sat, 2014-07-19 at 19:34 +0200, LABBE Corentin wrote:
>> Signed-off-by: LABBE Corentin <[email protected]>
>> ---
>> drivers/staging/sep/sep_main.c | 5 ++---
>> 1 file changed, 2 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
>> index 177e4b9..1580d95f 100644
>> --- a/drivers/staging/sep/sep_main.c
>> +++ b/drivers/staging/sep/sep_main.c
>> @@ -2881,12 +2881,11 @@ static int sep_free_dma_tables_and_dcb(struct sep_device *sep, bool isapplet,
>> if (is_kva) {
>> error = -ENODEV;
>> break;
>> - } else {
>> - error_temp = copy_to_user(
>> + }
>> + error_temp = copy_to_user(
>> (void __user *)tail_pt,
>> dcb_table_ptr->tail_data,
>> dcb_table_ptr->tail_data_size);
>> - }
>> if (error_temp) {
>> /* Release the DMA resource */
>> error = -EFAULT;
>
> It'd be probably be better to rewrite the code to unindent
> a level by using continue. Something like below:
>
> btw:
>
> the is_kva test looks very odd and should probably be
> moved outside the loop.
>
> pt_hold should probably be void * not unsigned long
> as it loses high order bits on x86-32.
>
> definition:
> aligned_u64 out_vr_tail_pt;
> use:
> + pt_hold = (unsigned long)dcb_table_ptr->
> + out_vr_tail_pt;
>

As I said in the introduction email, I have done thoses patch for the Eudyptula challenge,
since I have not the hardware needed by this driver I cannot modify beyond simple style changes without testing

Regards


> ---
> drivers/staging/sep/sep_main.c | 37 +++++++++++++++++--------------------
> 1 file changed, 17 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
> index 75ca15e..24b4a54 100644
> --- a/drivers/staging/sep/sep_main.c
> +++ b/drivers/staging/sep/sep_main.c
> @@ -2871,26 +2871,23 @@ static int sep_free_dma_tables_and_dcb(struct sep_device *sep, bool isapplet,
> * Go over each DCB and see if
> * tail pointer must be updated
> */
> - for (i = 0; i < (*dma_ctx)->nr_dcb_creat;
> - i++, dcb_table_ptr++) {
> - if (dcb_table_ptr->out_vr_tail_pt) {
> - pt_hold = (unsigned long)dcb_table_ptr->
> - out_vr_tail_pt;
> - tail_pt = (void *)pt_hold;
> - if (is_kva) {
> - error = -ENODEV;
> - break;
> - } else {
> - error_temp = copy_to_user(
> - (void __user *)tail_pt,
> - dcb_table_ptr->tail_data,
> - dcb_table_ptr->tail_data_size);
> - }
> - if (error_temp) {
> - /* Release the DMA resource */
> - error = -EFAULT;
> - break;
> - }
> + for (i = 0; i < (*dma_ctx)->nr_dcb_creat; i++, dcb_table_ptr++) {
> + if (!dcb_table_ptr->out_vr_tail_pt)
> + continue;
> + pt_hold = (unsigned long)dcb_table_ptr->
> + out_vr_tail_pt;
> + tail_pt = (void *)pt_hold;
> + if (is_kva) {
> + error = -ENODEV;
> + break;
> + }
> + error_temp = copy_to_user((void __user *)tail_pt,
> + dcb_table_ptr->tail_data,
> + dcb_table_ptr->tail_data_size);
> + if (error_temp) {
> + /* Release the DMA resource */
> + error = -EFAULT;
> + break;
> }
> }
> }
>
>

2014-07-21 19:19:07

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH 1/4] staging: sep: Solves some problems reported by checkpatch

On Sat, Jul 19, 2014 at 07:34:39PM +0200, LABBE Corentin wrote:
> Signed-off-by: LABBE Corentin <[email protected]>
> ---
> drivers/staging/sep/sep_main.c | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)

_which_ specific problems are fixed here?

Please be specific and provide a valid changelog entry in the body of
the email, changelogs without any information other than the subject:
are generally frowned apon.

Can you please fix this up and resend?

thanks,

greg k-h