There is no need for regulator consumers to include special logic for
fixed voltage regulators as they support regulator_set_voltage() just
like their non-fixed regulator counterparts.
Signed-off-by: Tim Kryger <[email protected]>
---
Since this eliminates logic that was concealing a bug in how the SDHCI
driver was setting ocr_avail, it is important that the following patch
to fix that bug be taken first. Fortunately, it is already queued.
https://lkml.org/lkml/2014/6/13/451
drivers/mmc/core/core.c | 8 --------
1 file changed, 8 deletions(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 7dc0c85..e56375c 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1280,15 +1280,7 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc,
max_uV = min_uV + 100 * 1000;
}
- /*
- * If we're using a fixed/static regulator, don't call
- * regulator_set_voltage; it would fail.
- */
voltage = regulator_get_voltage(supply);
-
- if (!regulator_can_change_voltage(supply))
- min_uV = max_uV = voltage;
-
if (voltage < 0)
result = voltage;
else if (voltage < min_uV || voltage > max_uV)
--
1.7.9.5