From: Thor Thayer <[email protected]>
This patch adds the L2 cache and OCRAM peripherals to the EDAC framework
using the EDAC device framework. The ECC is enabled early in the boot
process in the platform specific code.
Thor Thayer (4):
arm: socfpga: Enable L2 Cache ECC on startup.
arm: socfpga: Enable OCRAM ECC on startup.
edac: altera: Add Altera L2 Cache and OCRAM EDAC Support
arm: dts: Add Altera L2 Cache and OCRAM EDAC
.../bindings/arm/altera/socfpga-l2-edac.txt | 15 ++
.../bindings/arm/altera/socfpga-ocram-edac.txt | 16 ++
MAINTAINERS | 4 +-
arch/arm/boot/dts/socfpga.dtsi | 15 +-
arch/arm/mach-socfpga/Makefile | 2 +
arch/arm/mach-socfpga/l2_cache.c | 44 ++++
arch/arm/mach-socfpga/l2_cache.h | 28 +++
arch/arm/mach-socfpga/ocram.c | 90 +++++++
arch/arm/mach-socfpga/ocram.h | 28 +++
arch/arm/mach-socfpga/socfpga.c | 13 +-
drivers/edac/Kconfig | 14 ++
drivers/edac/Makefile | 3 +
drivers/edac/altera_edac_mgr.c | 261 ++++++++++++++++++++
drivers/edac/altera_edac_mgr.h | 56 +++++
drivers/edac/altera_l2_edac.c | 130 ++++++++++
drivers/edac/altera_ocram_edac.c | 107 ++++++++
16 files changed, 823 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-l2-edac.txt
create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-ocram-edac.txt
create mode 100644 arch/arm/mach-socfpga/l2_cache.c
create mode 100644 arch/arm/mach-socfpga/l2_cache.h
create mode 100644 arch/arm/mach-socfpga/ocram.c
create mode 100644 arch/arm/mach-socfpga/ocram.h
create mode 100644 drivers/edac/altera_edac_mgr.c
create mode 100644 drivers/edac/altera_edac_mgr.h
create mode 100644 drivers/edac/altera_l2_edac.c
create mode 100644 drivers/edac/altera_ocram_edac.c
--
1.7.9.5
From: Thor Thayer <[email protected]>
This patch enables the ECC for L2 cache on machine
startup. The ECC has to be enabled before data is
is stored in memory otherwise the ECC will fail on
reads.
Signed-off-by: Thor Thayer <[email protected]>
---
v2: Split OCRAM initialization into separate patch.
---
MAINTAINERS | 1 +
arch/arm/mach-socfpga/Makefile | 1 +
arch/arm/mach-socfpga/l2_cache.c | 44 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-socfpga/l2_cache.h | 28 ++++++++++++++++++++++++
arch/arm/mach-socfpga/socfpga.c | 5 ++++-
5 files changed, 78 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-socfpga/l2_cache.c
create mode 100644 arch/arm/mach-socfpga/l2_cache.h
diff --git a/MAINTAINERS b/MAINTAINERS
index ee1bc5b..d0c7752 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1407,6 +1407,7 @@ ARM/SOCFPGA EDAC SUPPORT
M: Thor Thayer <[email protected]>
S: Maintained
F: drivers/edac/altera_edac.
+F: arch/arm/mach-socfpga/l2_cache.*
ARM/STI ARCHITECTURE
M: Srinivas Kandagatla <[email protected]>
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 6dd7a93..142609e 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -4,3 +4,4 @@
obj-y := socfpga.o
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
+obj-$(CONFIG_EDAC_ALTERA_L2C) += l2_cache.o
diff --git a/arch/arm/mach-socfpga/l2_cache.c b/arch/arm/mach-socfpga/l2_cache.c
new file mode 100644
index 0000000..8e109f3
--- /dev/null
+++ b/arch/arm/mach-socfpga/l2_cache.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk-provider.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
+#include "l2_cache.h"
+
+void socfpga_init_l2_ecc(void)
+{
+ struct device_node *np;
+ void __iomem *mapped_l2_edac_addr;
+
+ np = of_find_compatible_node(NULL, NULL, "altr,l2-edac");
+ if (!np) {
+ pr_err("SOCFPGA: Unable to find altr,l2-edac in dtb\n");
+ return;
+ }
+
+ mapped_l2_edac_addr = of_iomap(np, 0);
+ if (!mapped_l2_edac_addr) {
+ pr_err("SOCFPGA: Unable to find L2 ECC mapping in dtb\n");
+ return;
+ }
+
+ /* Enable ECC */
+ writel(0x01, mapped_l2_edac_addr);
+
+ pr_debug("SOCFPGA: Success Initializing L2 cache ECC\n");
+}
+
diff --git a/arch/arm/mach-socfpga/l2_cache.h b/arch/arm/mach-socfpga/l2_cache.h
new file mode 100644
index 0000000..58e140d
--- /dev/null
+++ b/arch/arm/mach-socfpga/l2_cache.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef MACH_SOCFPGA_L2_CACHE_H
+#define MACH_SOCFPGA_L2_CACHE_H
+
+#ifdef CONFIG_EDAC_ALTERA_L2C
+void socfpga_init_l2_ecc(void);
+#else
+inline void socfpga_init_l2_ecc(void)
+{
+}
+#endif
+
+#endif /* #ifndef MACH_SOCFPGA_L2_CACHE_H */
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index adbf383..af6413a 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2012 Altera Corporation
+ * Copyright (C) 2012;2014 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,6 +25,8 @@
#include <asm/mach/map.h>
#include "core.h"
+#include "l2_cache.h"
+#include "ocram.h"
void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE));
void __iomem *sys_manager_base_addr;
@@ -83,6 +85,7 @@ static void __init socfpga_init_irq(void)
{
irqchip_init();
socfpga_sysmgr_init();
+ socfpga_init_l2_ecc();
}
static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
--
1.7.9.5
From: Thor Thayer <[email protected]>
Adding L2 Cache and On-Chip RAM EDAC support for the Altera SoCs using
the EDAC_DEVICE framework. The EDAC manager abstracts the common probe
functionality and test triggers. The L2 Cache and OCRAM files handle
the specific memory functions (alloc & free) for the testing triggers.
Signed-off-by: Thor Thayer <[email protected]>
---
v2: Fix L2 dependency comments.
---
MAINTAINERS | 2 +-
drivers/edac/Kconfig | 14 ++
drivers/edac/Makefile | 3 +
drivers/edac/altera_edac_mgr.c | 261 ++++++++++++++++++++++++++++++++++++++
drivers/edac/altera_edac_mgr.h | 56 ++++++++
drivers/edac/altera_l2_edac.c | 130 +++++++++++++++++++
drivers/edac/altera_ocram_edac.c | 107 ++++++++++++++++
7 files changed, 572 insertions(+), 1 deletion(-)
create mode 100644 drivers/edac/altera_edac_mgr.c
create mode 100644 drivers/edac/altera_edac_mgr.h
create mode 100644 drivers/edac/altera_l2_edac.c
create mode 100644 drivers/edac/altera_ocram_edac.c
diff --git a/MAINTAINERS b/MAINTAINERS
index c6d390e..f5a0692 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1406,7 +1406,7 @@ F: drivers/clk/socfpga/
ARM/SOCFPGA EDAC SUPPORT
M: Thor Thayer <[email protected]>
S: Maintained
-F: drivers/edac/altera_edac.
+F: drivers/edac/altera_*
F: arch/arm/mach-socfpga/l2_cache.*
F: arch/arm/mach-socfpga/ocram.*
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 7072c28..a9f98c2 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -385,4 +385,18 @@ config EDAC_ALTERA_MC
preloader must initialize the SDRAM before loading
the kernel.
+config EDAC_ALTERA_L2C
+ bool "Altera L2 Cache EDAC"
+ depends on EDAC_MM_EDAC=y && ARCH_SOCFPGA && CACHE_L2X0
+ help
+ Support for error detection and correction on the
+ Altera L2 cache Memory for Altera SoCs.
+
+config EDAC_ALTERA_OCRAM
+ bool "Altera On-Chip RAM EDAC"
+ depends on EDAC_MM_EDAC=y && ARCH_SOCFPGA && SRAM && GENERIC_ALLOCATOR
+ help
+ Support for error detection and correction on the
+ Altera On-Chip RAM Memory for Altera SoCs.
+
endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 359aa49..4e3889b 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -67,3 +67,6 @@ obj-$(CONFIG_EDAC_OCTEON_LMC) += octeon_edac-lmc.o
obj-$(CONFIG_EDAC_OCTEON_PCI) += octeon_edac-pci.o
obj-$(CONFIG_EDAC_ALTERA_MC) += altera_edac.o
+alt_edac_mgr-y := altera_edac_mgr.o
+obj-$(CONFIG_EDAC_ALTERA_L2C) += alt_edac_mgr.o altera_l2_edac.o
+obj-$(CONFIG_EDAC_ALTERA_OCRAM) += alt_edac_mgr.o altera_ocram_edac.o
diff --git a/drivers/edac/altera_edac_mgr.c b/drivers/edac/altera_edac_mgr.c
new file mode 100644
index 0000000..676ccbe
--- /dev/null
+++ b/drivers/edac/altera_edac_mgr.c
@@ -0,0 +1,261 @@
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ * Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Adapted from the highbank_l2_edac driver
+ */
+
+#include <linux/ctype.h>
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#include "altera_edac_mgr.h"
+#include "edac_core.h"
+#include "edac_module.h"
+
+static irqreturn_t altr_edac_mgr_handler(int irq, void *dev_id)
+{
+ struct edac_device_ctl_info *dci = dev_id;
+ struct altr_edac_mgr_dev *drvdata = dci->pvt_info;
+ const struct ecc_mgr_prv_data *priv = drvdata->data;
+
+ if (irq == drvdata->sb_irq) {
+ if (priv->ce_clear_mask)
+ writel(priv->ce_clear_mask, drvdata->base);
+ edac_device_handle_ce(dci, 0, 0, drvdata->edac_dev_name);
+ }
+ if (irq == drvdata->db_irq) {
+ if (priv->ue_clear_mask)
+ writel(priv->ue_clear_mask, drvdata->base);
+ edac_device_handle_ue(dci, 0, 0, drvdata->edac_dev_name);
+ panic("\nEDAC:ECC_MGR[Uncorrectable errors]\n");
+ }
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_EDAC_DEBUG
+ssize_t altr_edac_mgr_trig(struct edac_device_ctl_info *edac_dci,
+ const char *buffer, size_t count)
+{
+ u32 *ptemp, i, error_mask;
+ int result = 0;
+ unsigned long flags;
+ struct altr_edac_mgr_dev *drvdata = edac_dci->pvt_info;
+ const struct ecc_mgr_prv_data *priv = drvdata->data;
+ void *generic_ptr = edac_dci->dev;
+
+ if (!priv->alloc_mem)
+ return -ENOMEM;
+
+ /* Note that generic_ptr is initialized to the device * but in
+ * some init_functions, this is overridden and returns data */
+ ptemp = priv->alloc_mem(priv->trig_alloc_sz, &generic_ptr);
+ if (!ptemp) {
+ edac_printk(KERN_ERR, EDAC_MGR,
+ "Inject: Buffer Allocation error\n");
+ return -ENOMEM;
+ }
+
+ if (count == 3)
+ error_mask = priv->ue_set_mask;
+ else
+ error_mask = priv->ce_set_mask;
+
+ edac_printk(KERN_ALERT, EDAC_MGR,
+ "Trigger Error Mask (0x%X)\n", error_mask);
+
+ local_irq_save(flags);
+ /* write ECC corrupted data out. */
+ for (i = 0; i < (priv->trig_alloc_sz/sizeof(*ptemp)); i++) {
+ /* Read data so we're in the correct state */
+ rmb();
+ if (ACCESS_ONCE(ptemp[i]))
+ result = -1;
+ /* Toggle Error bit (it is latched), leave ECC enabled */
+ writel(error_mask, drvdata->base);
+ writel(priv->ecc_enable_mask, drvdata->base);
+ ptemp[i] = i;
+ }
+ /* Ensure it has been written out */
+ wmb();
+ local_irq_restore(flags);
+
+ if (result)
+ edac_printk(KERN_ERR, EDAC_MGR, "Mem Not Cleared\n");
+
+ /* Read out written data. ECC error caused here */
+ for (i = 0; i < 16; i++)
+ if (ACCESS_ONCE(ptemp[i]) != i)
+ edac_printk(KERN_ERR, EDAC_MGR, "Mem Doesn't match\n");
+
+ if (priv->free_mem)
+ priv->free_mem(ptemp, priv->trig_alloc_sz, generic_ptr);
+
+ return count;
+}
+
+static void altr_set_sysfs_attr(struct edac_device_ctl_info *edac_dci,
+ const struct ecc_mgr_prv_data *priv)
+{
+ struct edac_dev_sysfs_attribute *ecc_attr = priv->eccmgr_sysfs_attr;
+
+ if (ecc_attr) {
+ edac_dci->sysfs_attributes = ecc_attr;
+ edac_printk(KERN_ERR, EDAC_MGR, "Set SysFS trigger\n");
+ }
+}
+#else
+static void altr_set_sysfs_attr(struct edac_device_ctl_info *edac_dci,
+ const struct ecc_mgr_prv_data *priv)
+{}
+#endif /* #ifdef CONFIG_EDAC_DEBUG */
+
+static const struct of_device_id altr_edac_mgr_of_match[] = {
+#ifdef CONFIG_EDAC_ALTERA_L2C
+ { .compatible = "altr,l2-edac", .data = (void *)&l2ecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_OCRAM
+ { .compatible = "altr,ocram-edac", .data = (void *)&ocramecc_data },
+#endif
+ {},
+};
+MODULE_DEVICE_TABLE(of, altr_edac_mgr_of_match);
+
+/*
+ * altr_edac_mgr_probe()
+ * This is a generic EDAC device driver that will support
+ * various Altera memory devices such as the L2 cache ECC and
+ * OCRAM ECC as well as the memories for other peripherals.
+ * Module specific initialization is done by passing the
+ * function index in the device tree.
+ */
+static int altr_edac_mgr_probe(struct platform_device *pdev)
+{
+ struct edac_device_ctl_info *dci;
+ struct altr_edac_mgr_dev *drvdata;
+ struct resource *r;
+ int res = 0;
+ struct device_node *np = pdev->dev.of_node;
+ char *ecc_name = (char *)np->name;
+ static int dev_instance;
+
+ if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL))
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ edac_printk(KERN_ERR, EDAC_MGR,
+ "Unable to get mem resource\n");
+ return -ENODEV;
+ }
+
+ if (!devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
+ dev_name(&pdev->dev))) {
+ edac_printk(KERN_ERR, EDAC_MGR,
+ "%s:Error requesting mem region\n", ecc_name);
+ return -EBUSY;
+ }
+
+ dci = edac_device_alloc_ctl_info(sizeof(*drvdata), ecc_name,
+ 1, ecc_name, 1, 0, NULL, 0,
+ dev_instance++);
+
+ if (!dci)
+ return -ENOMEM;
+
+ drvdata = dci->pvt_info;
+ dci->dev = &pdev->dev;
+ platform_set_drvdata(pdev, dci);
+ drvdata->edac_dev_name = ecc_name;
+
+ drvdata->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+ if (!drvdata->base) {
+ edac_printk(KERN_ERR, EDAC_MGR,
+ "%s:Unable to map regs\n", ecc_name);
+ return -ENOMEM;
+ }
+
+ /* Get driver specific data for this EDAC device */
+ drvdata->data = of_match_node(altr_edac_mgr_of_match, np)->data;
+
+ /* Check specific dependencies for the module */
+ if (drvdata->data->setup) {
+ res = drvdata->data->setup(pdev, drvdata->base);
+ if (res < 0)
+ goto err;
+ }
+
+ drvdata->sb_irq = platform_get_irq(pdev, 0);
+ res = devm_request_irq(&pdev->dev, drvdata->sb_irq,
+ altr_edac_mgr_handler,
+ 0, dev_name(&pdev->dev), dci);
+ if (res < 0)
+ goto err;
+
+ drvdata->db_irq = platform_get_irq(pdev, 1);
+ res = devm_request_irq(&pdev->dev, drvdata->db_irq,
+ altr_edac_mgr_handler,
+ 0, dev_name(&pdev->dev), dci);
+ if (res < 0)
+ goto err;
+
+ dci->mod_name = "ECC_MGR";
+ dci->dev_name = drvdata->edac_dev_name;
+
+ altr_set_sysfs_attr(dci, drvdata->data);
+
+ if (edac_device_add_device(dci))
+ goto err;
+
+ devres_close_group(&pdev->dev, NULL);
+
+ return 0;
+err:
+ devres_release_group(&pdev->dev, NULL);
+ edac_device_free_ctl_info(dci);
+
+ return res;
+}
+
+static int altr_edac_mgr_remove(struct platform_device *pdev)
+{
+ struct edac_device_ctl_info *dci = platform_get_drvdata(pdev);
+
+ edac_device_del_device(&pdev->dev);
+ edac_device_free_ctl_info(dci);
+
+ return 0;
+}
+
+static struct platform_driver altr_edac_mgr_driver = {
+ .probe = altr_edac_mgr_probe,
+ .remove = altr_edac_mgr_remove,
+ .driver = {
+ .name = "altr_edac_mgr",
+ .of_match_table = altr_edac_mgr_of_match,
+ },
+};
+module_platform_driver(altr_edac_mgr_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thor Thayer");
+MODULE_DESCRIPTION("EDAC Driver for Altera SoC ECC Manager");
diff --git a/drivers/edac/altera_edac_mgr.h b/drivers/edac/altera_edac_mgr.h
new file mode 100644
index 0000000..791037c
--- /dev/null
+++ b/drivers/edac/altera_edac_mgr.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef ALTERA_EDAC_MGR_H
+#define ALTERA_EDAC_MGR_H
+
+#include <linux/edac.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include "edac_core.h"
+
+#define EDAC_MGR "MGR"
+
+struct ecc_mgr_prv_data {
+ int (*setup)(struct platform_device *pdev, void __iomem *base);
+ int ce_clear_mask;
+ int ue_clear_mask;
+#ifdef CONFIG_EDAC_DEBUG
+ struct edac_dev_sysfs_attribute *eccmgr_sysfs_attr;
+ void * (*alloc_mem)(size_t size, void **other);
+ void (*free_mem)(void *p, size_t size, void *other);
+ int ecc_enable_mask;
+ int ce_set_mask;
+ int ue_set_mask;
+ int trig_alloc_sz;
+#endif
+};
+
+struct altr_edac_mgr_dev {
+ void __iomem *base;
+ int sb_irq;
+ int db_irq;
+ const struct ecc_mgr_prv_data *data;
+ char *edac_dev_name;
+};
+
+extern const struct ecc_mgr_prv_data l2ecc_data;
+extern const struct ecc_mgr_prv_data ocramecc_data;
+
+ssize_t altr_edac_mgr_trig(struct edac_device_ctl_info *edac_dci,
+ const char *buffer, size_t count);
+
+#endif /* #ifndef ALTERA_EDAC_MGR_H */
diff --git a/drivers/edac/altera_l2_edac.c b/drivers/edac/altera_l2_edac.c
new file mode 100644
index 0000000..2397fef
--- /dev/null
+++ b/drivers/edac/altera_l2_edac.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/cacheflush.h>
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/edac.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#include "altera_edac_mgr.h"
+#include "edac_module.h"
+
+/* MPU L2 Register Defines */
+#define ALTR_MPUL2_CONTROL_OFFSET 0x100
+#define ALTR_MPUL2_CTL_CACHE_EN_MASK 0x00000001
+
+/* L2 ECC Management Group Defines */
+#define ALTR_MAN_GRP_L2_ECC_OFFSET 0x00
+#define ALTR_L2_ECC_EN_MASK 0x00000001
+#define ALTR_L2_ECC_INJS_MASK 0x00000002
+#define ALTR_L2_ECC_INJD_MASK 0x00000004
+
+#ifdef CONFIG_EDAC_DEBUG
+static void *l2_alloc_mem(size_t size, void **other)
+{
+ struct device *dev = *other;
+ void *ptemp = devm_kzalloc(dev, size, GFP_KERNEL);
+
+ if (!ptemp)
+ return NULL;
+
+ /* Make sure everything is written out */
+ wmb();
+ flush_cache_all();
+
+ return ptemp;
+}
+
+static void l2_free_mem(void *p, size_t size, void *other)
+{
+ struct device *dev = other;
+
+ if (dev && p)
+ devm_kfree(dev, p);
+}
+
+static struct edac_dev_sysfs_attribute altr_l2_sysfs_attributes[] = {
+ {
+ .attr = { .name = "altr_l2_trigger",
+ .mode = (S_IRUGO | S_IWUSR) },
+ .show = NULL,
+ .store = altr_edac_mgr_trig
+ },
+ {
+ .attr = {.name = NULL }
+ }
+};
+#endif /* #ifdef CONFIG_EDAC_DEBUG */
+
+/*
+ * altr_l2_dependencies()
+ * Test for L2 cache ECC dependencies upon entry because
+ * platform specific startup should have initialized the L2
+ * memory and enabled the ECC.
+ * Can't turn on ECC here because accessing un-initialized
+ * memory will cause CE/UE errors possibly causing an ABORT.
+ * Bail if ECC is not on.
+ * Test For 1) L2 ECC is enabled and 2) L2 Cache is enabled.
+ */
+static int altr_l2_dependencies(struct platform_device *pdev,
+ void __iomem *base)
+{
+ u32 control;
+ struct regmap *l2_vbase;
+
+ control = readl(base) & ALTR_L2_ECC_EN_MASK;
+ if (!control) {
+ dev_err(&pdev->dev, "L2: No ECC present, or ECC disabled\n");
+ return -ENODEV;
+ }
+
+ l2_vbase = syscon_regmap_lookup_by_compatible("arm,pl310-cache");
+ if (IS_ERR(l2_vbase)) {
+ dev_err(&pdev->dev,
+ "L2 ECC:regmap for arm,pl310-cache lookup failed.\n");
+ return -ENODEV;
+ }
+
+ regmap_read(l2_vbase, ALTR_MPUL2_CONTROL_OFFSET, &control);
+ if (!(control & ALTR_MPUL2_CTL_CACHE_EN_MASK)) {
+ dev_err(&pdev->dev, "L2: Cache disabled\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+const struct ecc_mgr_prv_data l2ecc_data = {
+ .setup = altr_l2_dependencies,
+ .ce_clear_mask = 0,
+ .ue_clear_mask = 0,
+#ifdef CONFIG_EDAC_DEBUG
+ .eccmgr_sysfs_attr = altr_l2_sysfs_attributes,
+ .alloc_mem = l2_alloc_mem,
+ .free_mem = l2_free_mem,
+ .ecc_enable_mask = ALTR_L2_ECC_EN_MASK,
+ .ce_set_mask = (ALTR_L2_ECC_EN_MASK | ALTR_L2_ECC_INJS_MASK),
+ .ue_set_mask = (ALTR_L2_ECC_EN_MASK | ALTR_L2_ECC_INJD_MASK),
+ .trig_alloc_sz = 4 * 1024,
+#endif
+};
+
diff --git a/drivers/edac/altera_ocram_edac.c b/drivers/edac/altera_ocram_edac.c
new file mode 100644
index 0000000..799b22b
--- /dev/null
+++ b/drivers/edac/altera_ocram_edac.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/ctype.h>
+#include <linux/edac.h>
+#include <linux/genalloc.h>
+#include <linux/of.h>
+#include "altera_edac_mgr.h"
+
+/* OCRAM ECC Management Group Defines */
+#define ALTR_MAN_GRP_OCRAM_ECC_OFFSET 0x04
+#define ALTR_OCR_ECC_EN_MASK 0x00000001
+#define ALTR_OCR_ECC_INJS_MASK 0x00000002
+#define ALTR_OCR_ECC_INJD_MASK 0x00000004
+#define ALTR_OCR_ECC_SERR_MASK 0x00000008
+#define ALTR_OCR_ECC_DERR_MASK 0x00000010
+
+#ifdef CONFIG_EDAC_DEBUG
+static void *ocram_alloc_mem(size_t size, void **other)
+{
+ struct device_node *np;
+ struct gen_pool *gp;
+ void *sram_addr;
+
+ np = of_find_compatible_node(NULL, NULL, "altr,ocram-edac");
+ if (!np)
+ return NULL;
+
+ gp = of_get_named_gen_pool(np, "iram", 0);
+ if (!gp)
+ return NULL;
+ *other = gp;
+
+ sram_addr = (void *)gen_pool_alloc(gp, size);
+ if (!sram_addr)
+ return NULL;
+
+ memset(sram_addr, 0, size);
+ wmb(); /* Ensure data is written out */
+
+ return sram_addr;
+}
+
+static void ocram_free_mem(void *p, size_t size, void *other)
+{
+ gen_pool_free((struct gen_pool *)other, (u32)p, size);
+}
+
+static struct edac_dev_sysfs_attribute altr_ocr_sysfs_attributes[] = {
+ {
+ .attr = { .name = "altr_ocram_trigger",
+ .mode = (S_IRUGO | S_IWUSR) },
+ .show = NULL,
+ .store = altr_edac_mgr_trig
+ },
+ {
+ .attr = {.name = NULL }
+ }
+};
+#endif /* #ifdef CONFIG_EDAC_DEBUG */
+
+/*
+ * altr_ocram_dependencies()
+ * Test for OCRAM cache ECC dependencies upon entry because
+ * ECC must be enabled.
+ */
+static int altr_ocram_dependencies(struct platform_device *pdev,
+ void __iomem *base)
+{
+ u32 control;
+
+ control = readl(base) & ALTR_OCR_ECC_EN_MASK;
+ if (!control) {
+ dev_err(&pdev->dev, "OCRAM: No ECC present, or ECC disabled.\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+const struct ecc_mgr_prv_data ocramecc_data = {
+ .setup = altr_ocram_dependencies,
+ .ce_clear_mask = (ALTR_OCR_ECC_EN_MASK | ALTR_OCR_ECC_SERR_MASK),
+ .ue_clear_mask = (ALTR_OCR_ECC_EN_MASK | ALTR_OCR_ECC_DERR_MASK),
+#ifdef CONFIG_EDAC_DEBUG
+ .eccmgr_sysfs_attr = altr_ocr_sysfs_attributes,
+ .alloc_mem = ocram_alloc_mem,
+ .free_mem = ocram_free_mem,
+ .ecc_enable_mask = ALTR_OCR_ECC_EN_MASK,
+ .ce_set_mask = (ALTR_OCR_ECC_EN_MASK | ALTR_OCR_ECC_INJS_MASK),
+ .ue_set_mask = (ALTR_OCR_ECC_EN_MASK | ALTR_OCR_ECC_INJD_MASK),
+ .trig_alloc_sz = (32 * sizeof(u32)),
+#endif
+};
--
1.7.9.5
From: Thor Thayer <[email protected]>
This patch enables the ECC for On-Chip RAM on machine
startup. The ECC has to be enabled before data is
is stored in memory otherwise the ECC will fail on
reads.
Signed-off-by: Thor Thayer <[email protected]>
---
v2: Split OCRAM ECC portion separately. Addition of iounmap()
and reorganization of gen_pool_free. Remove defconfig from patch.
---
MAINTAINERS | 1 +
arch/arm/mach-socfpga/Makefile | 1 +
arch/arm/mach-socfpga/ocram.c | 90 +++++++++++++++++++++++++++++++++++++++
arch/arm/mach-socfpga/ocram.h | 28 ++++++++++++
arch/arm/mach-socfpga/socfpga.c | 8 ++++
5 files changed, 128 insertions(+)
create mode 100644 arch/arm/mach-socfpga/ocram.c
create mode 100644 arch/arm/mach-socfpga/ocram.h
diff --git a/MAINTAINERS b/MAINTAINERS
index d0c7752..c6d390e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1408,6 +1408,7 @@ M: Thor Thayer <[email protected]>
S: Maintained
F: drivers/edac/altera_edac.
F: arch/arm/mach-socfpga/l2_cache.*
+F: arch/arm/mach-socfpga/ocram.*
ARM/STI ARCHITECTURE
M: Srinivas Kandagatla <[email protected]>
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 142609e..1552ca5 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -5,3 +5,4 @@
obj-y := socfpga.o
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_EDAC_ALTERA_L2C) += l2_cache.o
+obj-$(CONFIG_EDAC_ALTERA_OCRAM) += ocram.o
diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c
new file mode 100644
index 0000000..9136009
--- /dev/null
+++ b/arch/arm/mach-socfpga/ocram.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk-provider.h>
+#include <linux/genalloc.h>
+#include <linux/of_platform.h>
+
+#include "ocram.h"
+
+void socfpga_init_ocram_ecc(void)
+{
+ struct device_node *np;
+ const __be32 *prop;
+ u32 ocr_edac_addr, iram_addr, len;
+ void __iomem *mapped_ocr_edac_addr;
+ size_t size;
+ struct gen_pool *gp;
+
+ np = of_find_compatible_node(NULL, NULL, "altr,ocram-edac");
+ if (!np) {
+ pr_err("SOCFPGA: Unable to find altr,ocram-edac in dtb\n");
+ return;
+ }
+
+ prop = of_get_property(np, "reg", &size);
+ ocr_edac_addr = be32_to_cpup(prop++);
+ len = be32_to_cpup(prop);
+ if (!prop || size < sizeof(*prop)) {
+ pr_err("SOCFPGA: Unable to find OCRAM ECC mapping in dtb\n");
+ return;
+ }
+
+ gp = of_get_named_gen_pool(np, "iram", 0);
+ if (!gp) {
+ pr_err("SOCFPGA: OCRAM cannot find gen pool\n");
+ return;
+ }
+
+ np = of_find_compatible_node(NULL, NULL, "mmio-sram");
+ if (!np) {
+ pr_err("SOCFPGA: Unable to find mmio-sram in dtb\n");
+ return;
+ }
+ /* Determine the OCRAM address and size */
+ prop = of_get_property(np, "reg", &size);
+ iram_addr = be32_to_cpup(prop++);
+ len = be32_to_cpup(prop);
+
+ if (!prop || size < sizeof(*prop)) {
+ pr_err("SOCFPGA: Unable to find OCRAM mapping in dtb\n");
+ return;
+ }
+
+ iram_addr = gen_pool_alloc(gp, len);
+ if (iram_addr == 0) {
+ pr_err("SOCFPGA: cannot alloc from gen pool\n");
+ return;
+ }
+
+ memset((void *)iram_addr, 0, len);
+
+ gen_pool_free(gp, iram_addr, len);
+
+ mapped_ocr_edac_addr = ioremap(ocr_edac_addr, 4);
+ if (!mapped_ocr_edac_addr) {
+ pr_err("SOCFPGA: Unable to map OCRAM ecc regs.\n");
+ return;
+ }
+
+ /* Clear any pending OCRAM ECC interrupts, then enable ECC */
+ writel(0x18, mapped_ocr_edac_addr);
+ writel(0x19, mapped_ocr_edac_addr);
+
+ iounmap(mapped_ocr_edac_addr);
+
+ pr_debug("SOCFPGA: Success Initializing OCRAM\n");
+}
+
diff --git a/arch/arm/mach-socfpga/ocram.h b/arch/arm/mach-socfpga/ocram.h
new file mode 100644
index 0000000..f93cf84
--- /dev/null
+++ b/arch/arm/mach-socfpga/ocram.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef MACH_SOCFPGA_OCRAM_H
+#define MACH_SOCFPGA_OCRAM_H
+
+#ifdef CONFIG_EDAC_ALTERA_OCRAM
+void socfpga_init_ocram_ecc(void);
+#else
+inline void socfpga_init_ocram_ecc(void)
+{
+}
+#endif
+
+#endif /* #ifndef MACH_SOCFPGA_OCRAM_H */
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index af6413a..fb41aca 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -101,6 +101,13 @@ static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
writel(temp, rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL);
}
+static void __init socfpga_cyclone5_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ NULL, NULL);
+ socfpga_init_ocram_ecc();
+}
+
static const char *altera_dt_match[] = {
"altr,socfpga",
NULL
@@ -112,6 +119,7 @@ DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA")
.smp = smp_ops(socfpga_smp_ops),
.map_io = socfpga_map_io,
.init_irq = socfpga_init_irq,
+ .init_machine = socfpga_cyclone5_init,
.restart = socfpga_cyclone5_restart,
.dt_compat = altera_dt_match,
MACHINE_END
--
1.7.9.5
From: Thor Thayer <[email protected]>
Adding the device tree entries and bindings needed to support
the Altera L2 cache and On-Chip RAM EDAC. This patch relies upon
an earlier patch to declare and setup On-chip RAM properly.
http://www.spinics.net/lists/devicetree/msg51117.html
Signed-off-by: Thor Thayer <[email protected]>
---
v2: Remove OCRAM declaration and reference prior patch.
---
.../bindings/arm/altera/socfpga-l2-edac.txt | 15 +++++++++++++++
.../bindings/arm/altera/socfpga-ocram-edac.txt | 16 ++++++++++++++++
arch/arm/boot/dts/socfpga.dtsi | 15 ++++++++++++++-
3 files changed, 45 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-l2-edac.txt
create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-ocram-edac.txt
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-l2-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-l2-edac.txt
new file mode 100644
index 0000000..35b19e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-l2-edac.txt
@@ -0,0 +1,15 @@
+Altera SoCFPGA L2 cache Error Detection and Correction [EDAC]
+
+Required Properties:
+- compatible : Should be "altr,l2-edac"
+- reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt. Note the rising edge type.
+
+Example:
+
+ l2edac@ffd08140 {
+ compatible = "altr,l2-edac";
+ reg = <0xffd08140 0x4>;
+ interrupts = <0 36 1>, <0 37 1>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-ocram-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-ocram-edac.txt
new file mode 100644
index 0000000..31ab205
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-ocram-edac.txt
@@ -0,0 +1,16 @@
+Altera SoCFPGA On-Chip RAM Error Detection and Correction [EDAC]
+
+OCRAM ECC Required Properties:
+- compatible : Should be "altr,ocram-edac"
+- reg : Address and size for ECC error interrupt clear registers.
+- iram : phandle to On-Chip RAM definition.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt. Note the rising edge type.
+
+Example:
+ ocramedac@ffd08144 {
+ compatible = "altr,ocram-edac";
+ reg = <0xffd08144 0x4>;
+ iram = <&ocram>;
+ interrupts = <0 178 1>, <0 179 1>;
+ };
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 6af96ed..32c63a3 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -618,8 +618,21 @@
interrupts = <0 39 4>;
};
+ l2edac@ffd08140 {
+ compatible = "altr,l2-edac";
+ reg = <0xffd08140 0x4>;
+ interrupts = <0 36 1>, <0 37 1>;
+ };
+
+ ocramedac@ffd08144 {
+ compatible = "altr,ocram-edac";
+ reg = <0xffd08144 0x4>;
+ iram = <&ocram>;
+ interrupts = <0 178 1>, <0 179 1>;
+ };
+
L2: l2-cache@fffef000 {
- compatible = "arm,pl310-cache";
+ compatible = "arm,pl310-cache", "syscon";
reg = <0xfffef000 0x1000>;
interrupts = <0 38 0x04>;
cache-unified;
--
1.7.9.5
Hi Borislav,
On 10/17/2014 03:33 PM, [email protected] wrote:
> From: Thor Thayer <[email protected]>
>
> This patch adds the L2 cache and OCRAM peripherals to the EDAC framework
> using the EDAC device framework. The ECC is enabled early in the boot
> process in the platform specific code.
>
> Thor Thayer (4):
> arm: socfpga: Enable L2 Cache ECC on startup.
> arm: socfpga: Enable OCRAM ECC on startup.
> edac: altera: Add Altera L2 Cache and OCRAM EDAC Support
> arm: dts: Add Altera L2 Cache and OCRAM EDAC
>
> .../bindings/arm/altera/socfpga-l2-edac.txt | 15 ++
> .../bindings/arm/altera/socfpga-ocram-edac.txt | 16 ++
> MAINTAINERS | 4 +-
> arch/arm/boot/dts/socfpga.dtsi | 15 +-
> arch/arm/mach-socfpga/Makefile | 2 +
> arch/arm/mach-socfpga/l2_cache.c | 44 ++++
> arch/arm/mach-socfpga/l2_cache.h | 28 +++
> arch/arm/mach-socfpga/ocram.c | 90 +++++++
> arch/arm/mach-socfpga/ocram.h | 28 +++
> arch/arm/mach-socfpga/socfpga.c | 13 +-
> drivers/edac/Kconfig | 14 ++
> drivers/edac/Makefile | 3 +
> drivers/edac/altera_edac_mgr.c | 261 ++++++++++++++++++++
> drivers/edac/altera_edac_mgr.h | 56 +++++
> drivers/edac/altera_l2_edac.c | 130 ++++++++++
> drivers/edac/altera_ocram_edac.c | 107 ++++++++
> 16 files changed, 823 insertions(+), 3 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-l2-edac.txt
> create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-ocram-edac.txt
> create mode 100644 arch/arm/mach-socfpga/l2_cache.c
> create mode 100644 arch/arm/mach-socfpga/l2_cache.h
> create mode 100644 arch/arm/mach-socfpga/ocram.c
> create mode 100644 arch/arm/mach-socfpga/ocram.h
> create mode 100644 drivers/edac/altera_edac_mgr.c
> create mode 100644 drivers/edac/altera_edac_mgr.h
> create mode 100644 drivers/edac/altera_l2_edac.c
> create mode 100644 drivers/edac/altera_ocram_edac.c
>
Do you have any comments about this driver?
Thanks,
Thor
On Mon, Oct 27, 2014 at 01:50:24PM -0500, Thor Thayer wrote:
> Do you have any comments about this driver?
Just a question: why do you have three .c files for something which
does only error injection and nothing else AFAICT? Why isn't this part
of altera_edac.c?
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
On 10/27/2014 03:43 PM, Borislav Petkov wrote:
> On Mon, Oct 27, 2014 at 01:50:24PM -0500, Thor Thayer wrote:
>> Do you have any comments about this driver?
> Just a question: why do you have three .c files for something which
> does only error injection and nothing else AFAICT? Why isn't this part
> of altera_edac.c?
>
There are 2 files for doing the error injection (altera_l2_edac.c and
altera_ocram_edac.c) and then 1 file for the irq handling and probe
(altera_edac_mgr.c).
The L2 cache and the On-Chip RAM drivers were based on the Calxeda L2
cache driver and when written as 2 separate files, the resulting code
was very similar from the probe and error handling standpoint so the
common code was combined (altera_edac_mgr.c).
The Memory Controller model was used for the SDRAM EDAC (altera_edac.c)
since it matches the DIMM model. The MC model didn't seem to fit the
discrete memories like OCRAM and L2 cache (these files) so I used the
EDAC device model which agreed with the Calxeda L2 cache driver.
Should I move the EDAC Device probe and error handling from
altera_edac_mgr.c to altera_edac.c? Can I mix the MC and Device models
in the same file?
Thanks for reviewing and for commenting.
Thor
On Mon, Oct 27, 2014 at 04:35:00PM -0500, Thor Thayer wrote:
> Should I move the EDAC Device probe and error handling from
> altera_edac_mgr.c to altera_edac.c? Can I mix the MC and Device models
> in the same file?
Right, for basic practical reasons, I'd like to keep all functionality
pertaining to one hw flavour in one compilation unit/one driver. We can
always split them later if a compelling reason emerges.
Thanks.
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
On 10/27/2014 04:59 PM, Borislav Petkov wrote:
> On Mon, Oct 27, 2014 at 04:35:00PM -0500, Thor Thayer wrote:
>> Should I move the EDAC Device probe and error handling from
>> altera_edac_mgr.c to altera_edac.c? Can I mix the MC and Device models
>> in the same file?
> Right, for basic practical reasons, I'd like to keep all functionality
> pertaining to one hw flavour in one compilation unit/one driver. We can
> always split them later if a compelling reason emerges.
>
> Thanks.
>
OK. I will make the changes.
Would the L2 cache and OCRAM specific functions also be in
altera_edac.c? Each of these EDAC pieces is independent and can be
compiled in without the others. I've read that the use of #ifdef's is
discouraged and having separate files in the Makefile solves that.
Thanks for the clarification.
Thor
On Mon, Oct 27, 2014 at 05:48:17PM -0500, Thor Thayer wrote:
> Would the L2 cache and OCRAM specific functions also be in altera_edac.c?
> Each of these EDAC pieces is independent and can be compiled in without the
> others. I've read that the use of #ifdef's is discouraged and having
> separate files in the Makefile solves that.
Let's keep it simple and put all the altera bits in one file for now. If
we need to split some of the functionality out, we can always do that
later.
Thanks.
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--