From: Mathieu Poirier <[email protected]>
Coresight IP blocks allow for the support of HW assisted tracing
on ARM SoCs. Bindings for the currently available blocks are
presented herein.
Signed-off-by: Pratik Patel <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
---
.../devicetree/bindings/arm/coresight.txt | 203 +++++++++++++++++++++
1 file changed, 203 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/coresight.txt
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
new file mode 100644
index 0000000..96dd947
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -0,0 +1,203 @@
+* CoreSight Components:
+
+CoreSight components are compliant with the ARM CoreSight architecture
+specification and can be connected in various topologies to suit a particular
+SoCs tracing needs. These trace components can generally be classified as sinks,
+links and sources. Trace data produced by one or more sources flows through the
+intermediate links connecting the source to the currently selected sink. Each
+CoreSight component device should use these properties to describe its hardware
+characteristcs.
+
+* Required properties for all components *except* non-configurable replicators:
+
+ * compatible: These have to be supplemented with "arm,primecell" as
+ drivers are using the AMBA bus interface. Possible values include:
+ - "arm,coresight-etb10", "arm,primecell";
+ - "arm,coresight-tpiu", "arm,primecell";
+ - "arm,coresight-tmc", "arm,primecell";
+ - "arm,coresight-funnel", "arm,primecell";
+ - "arm,coresight-etm3x", "arm,primecell";
+
+ * reg: physical base address and length of the register
+ set(s) of the component.
+
+ * clocks: the clock associated to this component.
+
+ * clock-names: the name of the clock as referenced by the code.
+ Since we are using the AMBA framework, the name should be
+ "apb_pclk".
+
+ * port or ports: The representation of the component's port
+ layout using the generic DT graph presentation found in
+ "bindings/graph.txt".
+
+* Required properties for devices that don't show up on the AMBA bus, such as
+ non-configurable replicators:
+
+ * compatible: Currently supported value is (note the absence of the
+ AMBA markee):
+ - "arm,coresight-replicator"
+
+ * id: a unique number that will identify this replicator.
+
+ * port or ports: same as above.
+
+* Optional properties for ETM/PTMs:
+
+ * arm,cp14: must be present if the system accesses ETM/PTM management registers
+ via co-processor 14.
+
+ * cpu: the cpu phandle this ETM/PTM is affined to. When omitted the source is
+ considered to belong to CPU0.
+
+* Optional property for TMC:
+
+ * arm,buffer-size: size of contiguous buffer space for TMC ETR
+ (embedded trace router)
+
+
+Example:
+
+1. Sinks
+ etb@0,20010000 {
+ compatible = "arm,coresight-etb10", "arm,primecell";
+ reg = <0 0x20010000 0 0x1000>;
+
+ coresight-default-sink;
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ port {
+ etb_in_port: endpoint@0 {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port0>;
+ };
+ };
+ };
+
+ tpiu@0,20030000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0 0x20030000 0 0x1000>;
+
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ port {
+ tpiu_in_port: endpoint@0 {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+
+2. Links
+ replicator {
+ /* non-configurable replicators don't show up on the
+ * AMBA bus. As such no need to add "arm,primecell".
+ */
+ compatible = "arm,coresight-replicator";
+ /* this will show up in debugfs as "0.replicator" */
+ id = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&etb_in_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+
+ /* replicator input port */
+ port@2 {
+ reg = <0>;
+ replicator_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel_out_port0>;
+ };
+ };
+ };
+ };
+
+ funnel@0,20040000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x20040000 0 0x1000>;
+
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel output port */
+ port@0 {
+ reg = <0>;
+ funnel_out_port0: endpoint {
+ remote-endpoint = <&replicator_in_port0>;
+ };
+ };
+
+ /* funnel input ports */
+ port@1 {
+ reg = <0>;
+ funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&ptm0_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&ptm1_out_port>;
+ };
+ };
+
+ port@3 {
+ reg = <2>;
+ funnel_in_port2: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out_port>;
+ };
+ };
+
+ };
+ };
+
+3. Sources
+ ptm@0,2201c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0 0x2201c000 0 0x1000>;
+
+ cpu = <&cpu0>;
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
+ };
+ };
+
+ ptm@0,2201d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0 0x2201d000 0 0x1000>;
+
+ cpu = <&cpu1>;
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
+ };
+ };
--
1.9.1
On Tue, Oct 21, 2014 at 5:13 AM, <[email protected]> wrote:
> From: Mathieu Poirier <[email protected]>
>
> Coresight IP blocks allow for the support of HW assisted tracing
> on ARM SoCs. Bindings for the currently available blocks are
> presented herein.
>
> Signed-off-by: Pratik Patel <[email protected]>
> Signed-off-by: Mathieu Poirier <[email protected]>
Didn't I give you a reviewed-by on this already?
Rob
> ---
> .../devicetree/bindings/arm/coresight.txt | 203 +++++++++++++++++++++
> 1 file changed, 203 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/coresight.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
> new file mode 100644
> index 0000000..96dd947
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/coresight.txt
> @@ -0,0 +1,203 @@
> +* CoreSight Components:
> +
> +CoreSight components are compliant with the ARM CoreSight architecture
> +specification and can be connected in various topologies to suit a particular
> +SoCs tracing needs. These trace components can generally be classified as sinks,
> +links and sources. Trace data produced by one or more sources flows through the
> +intermediate links connecting the source to the currently selected sink. Each
> +CoreSight component device should use these properties to describe its hardware
> +characteristcs.
> +
> +* Required properties for all components *except* non-configurable replicators:
> +
> + * compatible: These have to be supplemented with "arm,primecell" as
> + drivers are using the AMBA bus interface. Possible values include:
> + - "arm,coresight-etb10", "arm,primecell";
> + - "arm,coresight-tpiu", "arm,primecell";
> + - "arm,coresight-tmc", "arm,primecell";
> + - "arm,coresight-funnel", "arm,primecell";
> + - "arm,coresight-etm3x", "arm,primecell";
> +
> + * reg: physical base address and length of the register
> + set(s) of the component.
> +
> + * clocks: the clock associated to this component.
> +
> + * clock-names: the name of the clock as referenced by the code.
> + Since we are using the AMBA framework, the name should be
> + "apb_pclk".
> +
> + * port or ports: The representation of the component's port
> + layout using the generic DT graph presentation found in
> + "bindings/graph.txt".
> +
> +* Required properties for devices that don't show up on the AMBA bus, such as
> + non-configurable replicators:
> +
> + * compatible: Currently supported value is (note the absence of the
> + AMBA markee):
> + - "arm,coresight-replicator"
> +
> + * id: a unique number that will identify this replicator.
> +
> + * port or ports: same as above.
> +
> +* Optional properties for ETM/PTMs:
> +
> + * arm,cp14: must be present if the system accesses ETM/PTM management registers
> + via co-processor 14.
> +
> + * cpu: the cpu phandle this ETM/PTM is affined to. When omitted the source is
> + considered to belong to CPU0.
> +
> +* Optional property for TMC:
> +
> + * arm,buffer-size: size of contiguous buffer space for TMC ETR
> + (embedded trace router)
> +
> +
> +Example:
> +
> +1. Sinks
> + etb@0,20010000 {
> + compatible = "arm,coresight-etb10", "arm,primecell";
> + reg = <0 0x20010000 0 0x1000>;
> +
> + coresight-default-sink;
> + clocks = <&oscclk6a>;
> + clock-names = "apb_pclk";
> + port {
> + etb_in_port: endpoint@0 {
> + slave-mode;
> + remote-endpoint = <&replicator_out_port0>;
> + };
> + };
> + };
> +
> + tpiu@0,20030000 {
> + compatible = "arm,coresight-tpiu", "arm,primecell";
> + reg = <0 0x20030000 0 0x1000>;
> +
> + clocks = <&oscclk6a>;
> + clock-names = "apb_pclk";
> + port {
> + tpiu_in_port: endpoint@0 {
> + slave-mode;
> + remote-endpoint = <&replicator_out_port1>;
> + };
> + };
> + };
> +
> +2. Links
> + replicator {
> + /* non-configurable replicators don't show up on the
> + * AMBA bus. As such no need to add "arm,primecell".
> + */
> + compatible = "arm,coresight-replicator";
> + /* this will show up in debugfs as "0.replicator" */
> + id = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* replicator output ports */
> + port@0 {
> + reg = <0>;
> + replicator_out_port0: endpoint {
> + remote-endpoint = <&etb_in_port>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + replicator_out_port1: endpoint {
> + remote-endpoint = <&tpiu_in_port>;
> + };
> + };
> +
> + /* replicator input port */
> + port@2 {
> + reg = <0>;
> + replicator_in_port0: endpoint {
> + slave-mode;
> + remote-endpoint = <&funnel_out_port0>;
> + };
> + };
> + };
> + };
> +
> + funnel@0,20040000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0 0x20040000 0 0x1000>;
> +
> + clocks = <&oscclk6a>;
> + clock-names = "apb_pclk";
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* funnel output port */
> + port@0 {
> + reg = <0>;
> + funnel_out_port0: endpoint {
> + remote-endpoint = <&replicator_in_port0>;
> + };
> + };
> +
> + /* funnel input ports */
> + port@1 {
> + reg = <0>;
> + funnel_in_port0: endpoint {
> + slave-mode;
> + remote-endpoint = <&ptm0_out_port>;
> + };
> + };
> +
> + port@2 {
> + reg = <1>;
> + funnel_in_port1: endpoint {
> + slave-mode;
> + remote-endpoint = <&ptm1_out_port>;
> + };
> + };
> +
> + port@3 {
> + reg = <2>;
> + funnel_in_port2: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm0_out_port>;
> + };
> + };
> +
> + };
> + };
> +
> +3. Sources
> + ptm@0,2201c000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0 0x2201c000 0 0x1000>;
> +
> + cpu = <&cpu0>;
> + clocks = <&oscclk6a>;
> + clock-names = "apb_pclk";
> + port {
> + ptm0_out_port: endpoint {
> + remote-endpoint = <&funnel_in_port0>;
> + };
> + };
> + };
> +
> + ptm@0,2201d000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0 0x2201d000 0 0x1000>;
> +
> + cpu = <&cpu1>;
> + clocks = <&oscclk6a>;
> + clock-names = "apb_pclk";
> + port {
> + ptm1_out_port: endpoint {
> + remote-endpoint = <&funnel_in_port1>;
> + };
> + };
> + };
> --
> 1.9.1
>