This patchset contains initial support for Broadcom's Cygnus SoC based on our
iProc architecture. Initial support is minimal and includes just the mach
platform code, clock driver, and a basic device tree configuration. Peripheral
drivers will be submitted soon, as will device tree configurations for other
Cygnus board variants.
Changes from v6:
- Additional patch added for cleanup of other areas of mach-bcm/Kconfig
discovered during Cygnus submission review to:
- removed one level of menu for ARCH_BCM_MOBILE in mach-bcm-Kconfig based
on feedback from Arnd
- added comment sections to Kconfig to identify SoC architecture groupings
Changes from v5:
- removed one level of menu used in mach-bcm/Kconfig
- changed MAINTAINERS to use N: to support all files associated with iproc
and cygnus going forward
- updated bcm_cygnus_defconfig to remove some DEBUG options that greatly
hamper performance
Changes from v4:
- simple clock tree used. reworked clock driver will be submitted later
- fixed MAINTAINERS patchset error
- removed DEBUG_UART_8250 Kconfig.debug legacy support
- made ARCH_BCM_IPROC a silent Kconfig option
- removed multi_v7_defconfig as it is not needed at this time, can
support in future patchset but does not seem optimal configs for our
current usage.
Changes from v3:
- restart functionality removed. Will be added in a different patchset
in drivers/power
- removed NEON init sequence. Will be moved to bootloader
- cleaned up Kconfigs for ARCH_BCM_CYGNUS by removing unnecessary selects
- consolidated ARCH_BCM_IPROC with select from ARCH_BCM_CYGNUS and
ARCH_BCM5301X
- removed bcm911360_entphn binding
- added documentation for SoCs currently supported in Cygnus family
Changes from v2:
- rebased to 3.17 kernel
Changes from v1:
- Address code review comments as per previous responses.
- Copyright headers updated to remove Broadcom URL.
- mach platform code still contains hard coded addresses. These address are
the same for all Cygnus variants. Could you please provide guidance on where
they should go if you would still like them changed. There does not seem to
be a reason to change them to device tree as they do not change.
Jonathan Richardson (3):
ARM: cygnus: Initial support for Broadcom Cygnus SoC
dt-bindings: Document Broadcom Cygnus SoC and clocks
ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC
Scott Branden (4):
ARM: dts: Enable Broadcom Cygnus SoC
MAINTAINERS: Entry for Cygnus/iproc arm architecture
ARM: mach-bcm: Consolidate currently supported IPROC SoCs
ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig
.../devicetree/bindings/arm/bcm/cygnus.txt | 31 +++
.../devicetree/bindings/clock/bcm-cygnus-clock.txt | 34 +++
MAINTAINERS | 14 ++
arch/arm/boot/dts/Makefile | 4 +
arch/arm/boot/dts/bcm-cygnus-clock.dtsi | 73 ++++++
arch/arm/boot/dts/bcm-cygnus.dtsi | 109 +++++++++
arch/arm/boot/dts/bcm911360_entphn.dts | 22 ++
arch/arm/boot/dts/bcm911360k.dts | 22 ++
arch/arm/boot/dts/bcm958300k.dts | 22 ++
arch/arm/configs/bcm_cygnus_defconfig | 237 ++++++++++++++++++++
arch/arm/configs/bcm_defconfig | 3 +-
arch/arm/configs/multi_v7_defconfig | 3 +-
arch/arm/mach-bcm/Kconfig | 93 +++++---
arch/arm/mach-bcm/Makefile | 3 +
arch/arm/mach-bcm/bcm_cygnus.c | 26 +++
15 files changed, 658 insertions(+), 38 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/cygnus.txt
create mode 100644 Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt
create mode 100644 arch/arm/boot/dts/bcm-cygnus-clock.dtsi
create mode 100644 arch/arm/boot/dts/bcm-cygnus.dtsi
create mode 100644 arch/arm/boot/dts/bcm911360_entphn.dts
create mode 100644 arch/arm/boot/dts/bcm911360k.dts
create mode 100644 arch/arm/boot/dts/bcm958300k.dts
create mode 100644 arch/arm/configs/bcm_cygnus_defconfig
create mode 100644 arch/arm/mach-bcm/bcm_cygnus.c
--
1.7.9.5
From: Jonathan Richardson <[email protected]>
Reviewed-by: Arun Parameswaran <[email protected]>
Tested-by: Jonathan Richardson <[email protected]>
Reviewed-by: JD (Jiandong) Zheng <[email protected]>
Reviewed-by: Ray Jui <[email protected]>
Signed-off-by: Scott Branden <[email protected]>
---
.../devicetree/bindings/arm/bcm/cygnus.txt | 31 ++++++++++++++++++
.../devicetree/bindings/clock/bcm-cygnus-clock.txt | 34 ++++++++++++++++++++
2 files changed, 65 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/cygnus.txt
create mode 100644 Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt
diff --git a/Documentation/devicetree/bindings/arm/bcm/cygnus.txt b/Documentation/devicetree/bindings/arm/bcm/cygnus.txt
new file mode 100644
index 0000000..4c77169
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/cygnus.txt
@@ -0,0 +1,31 @@
+Broadcom Cygnus device tree bindings
+------------------------------------
+
+
+Boards with Cygnus SoCs shall have the following properties:
+
+Required root node property:
+
+BCM11300
+compatible = "brcm,bcm11300", "brcm,cygnus";
+
+BCM11320
+compatible = "brcm,bcm11320", "brcm,cygnus";
+
+BCM11350
+compatible = "brcm,bcm11350", "brcm,cygnus";
+
+BCM11360
+compatible = "brcm,bcm11360", "brcm,cygnus";
+
+BCM58300
+compatible = "brcm,bcm58300", "brcm,cygnus";
+
+BCM58302
+compatible = "brcm,bcm58302", "brcm,cygnus";
+
+BCM58303
+compatible = "brcm,bcm58303", "brcm,cygnus";
+
+BCM58305
+compatible = "brcm,bcm58305", "brcm,cygnus";
diff --git a/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt b/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt
new file mode 100644
index 0000000..00d26ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt
@@ -0,0 +1,34 @@
+Broadcom Cygnus Clocks
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Currently various "fixed" clocks are declared for peripheral drivers that use
+the common clock framework to reference their core clocks. Proper support of
+these clocks will be added later
+
+Device tree example:
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <25000000>;
+ };
+
+ apb_clk: apb_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000000>;
+ };
+
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ };
+ };
--
1.7.9.5
From: Jonathan Richardson <[email protected]>
This defconfig is utilized so a customer or developer can understand
what kernel drivers are utilized by the Cygnus SoC. It also enables
debug configs which should be disabled if optimal performance is
desired.
Tested-by: Jonathan Richardson <[email protected]>
Reviewed-by: JD (Jiandong) Zheng <[email protected]>
Signed-off-by: Scott Branden <[email protected]>
---
arch/arm/configs/bcm_cygnus_defconfig | 237 +++++++++++++++++++++++++++++++++
1 file changed, 237 insertions(+)
create mode 100644 arch/arm/configs/bcm_cygnus_defconfig
diff --git a/arch/arm/configs/bcm_cygnus_defconfig b/arch/arm/configs/bcm_cygnus_defconfig
new file mode 100644
index 0000000..9ad77a8
--- /dev/null
+++ b/arch/arm/configs/bcm_cygnus_defconfig
@@ -0,0 +1,237 @@
+CONFIG_KERNEL_XZ=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM_CYGNUS=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_PCI=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+# CONFIG_COMPACTION is not set
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_IPV6_SIT is not set
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_NETFILTER=y
+# CONFIG_BRIDGE_NETFILTER is not set
+CONFIG_NF_CONNTRACK=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+CONFIG_NF_CONNTRACK_FTP=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_REDIRECT=y
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_RAW=y
+CONFIG_NF_CONNTRACK_IPV6=y
+CONFIG_IP6_NF_IPTABLES=y
+CONFIG_IP6_NF_MATCH_AH=y
+CONFIG_IP6_NF_MATCH_EUI64=y
+CONFIG_IP6_NF_MATCH_FRAG=y
+CONFIG_IP6_NF_MATCH_OPTS=y
+CONFIG_IP6_NF_MATCH_IPV6HEADER=y
+CONFIG_IP6_NF_MATCH_MH=y
+CONFIG_IP6_NF_MATCH_RT=y
+CONFIG_IP6_NF_FILTER=y
+CONFIG_IP6_NF_TARGET_REJECT=y
+CONFIG_IP6_NF_MANGLE=y
+CONFIG_IP6_NF_RAW=y
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+CONFIG_VLAN_8021Q=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FQ_CODEL=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_DEFAULT_PS is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_RFKILL=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PHYLIB=y
+CONFIG_BROADCOM_PHY=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_SMBUS=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=y
+# CONFIG_USB_GSPCA is not set
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_SOC=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
+CONFIG_RTC_CLASS=y
+CONFIG_PWM=y
+CONFIG_EXT4_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_OBJECTS=y
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_UART_8250=y
+CONFIG_DEBUG_UART_PHYS=0x18023000
+CONFIG_DEBUG_UART_VIRT=0xf1023000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
--
1.7.9.5
Acked-by: Jonathan Richardson <[email protected]>
Signed-off-by: Scott Branden <[email protected]>
---
MAINTAINERS | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index b0f17d5..dfe255f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2125,6 +2125,20 @@ L: [email protected]
S: Supported
F: drivers/scsi/bnx2i/
+BROADCOM CYGNUS/IPROC ARM ARCHITECTURE
+M: Ray Jui <[email protected]>
+M: Scott Branden <[email protected]>
+L: [email protected] (moderated for non-subscribers)
+L: [email protected]
+T: git git://git.github.com/brcm/linux.git
+S: Maintained
+N: iproc
+N: cygnus
+N: bcm9113*
+N: bcm9583*
+N: bcm583*
+N: bcm113*
+
BROADCOM KONA GPIO DRIVER
M: Ray Jui <[email protected]>
L: [email protected]
--
1.7.9.5
DT files to enable cygnus consisting on reference designs
and cygnus core configuration.
Reviewed-by: Ray Jui <[email protected]>
Reviewed-by: Arun Parameswaran <[email protected]>
Tested-by: Jonathan Richardson <[email protected]>
Reviewed-by: JD (Jiandong) Zheng <[email protected]>
Signed-off-by: Scott Branden <[email protected]>
---
arch/arm/boot/dts/Makefile | 4 ++
arch/arm/boot/dts/bcm-cygnus-clock.dtsi | 73 +++++++++++++++++++++
arch/arm/boot/dts/bcm-cygnus.dtsi | 109 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm911360_entphn.dts | 22 +++++++
arch/arm/boot/dts/bcm911360k.dts | 22 +++++++
arch/arm/boot/dts/bcm958300k.dts | 22 +++++++
6 files changed, 252 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm-cygnus-clock.dtsi
create mode 100644 arch/arm/boot/dts/bcm-cygnus.dtsi
create mode 100644 arch/arm/boot/dts/bcm911360_entphn.dts
create mode 100644 arch/arm/boot/dts/bcm911360k.dts
create mode 100644 arch/arm/boot/dts/bcm958300k.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7c80af9..a6b734a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -54,6 +54,10 @@ dtb-$(CONFIG_ARCH_AT91) += at91-sama5d4ek.dtb
dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+ bcm911360_entphn.dtb \
+ bcm911360k.dtb \
+ bcm958300k.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
new file mode 100644
index 0000000..d06172b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <25000000>;
+ };
+
+ apb_clk: apb_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000000>;
+ };
+
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ };
+
+ sdio_clk: lcpll_ch2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
+ axi81_clk: axi81_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ keypad_clk: keypad_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <31806>;
+ };
+
+ adc_clk: adc_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1562500>;
+ };
+
+ pwm_clk: pwm_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ };
+
+ lcd_clk: mipipll_ch1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
new file mode 100644
index 0000000..a377ab2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -0,0 +1,109 @@
+/*
+ * Copyright 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "brcm,cygnus";
+ model = "Broadcom Cygnus SoC";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &uart3;
+ serial1 = &uart0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk debug";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x0>;
+ };
+ };
+
+ /include/ "bcm-cygnus-clock.dtsi"
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus", "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ wdt@18009000 {
+ compatible = "arm,sp805" , "arm,primecell";
+ reg = <0x18009000 0x1000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ uart3: serial@18023000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18023000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <100000000>;
+ clocks = <&axi81_clk>;
+ status = "okay";
+ };
+
+ uart0: serial@18020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18020000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "okay";
+ };
+
+ gic: interrupt-controller@19021000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x19021000 0x1000>,
+ <0x19020100 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0x19022000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ timer@19020200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x19020200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ };
+
+};
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
new file mode 100644
index 0000000..c5188d7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+ model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
+ compatible = "brcm,bcm11360", "brcm,cygnus";
+};
diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts
new file mode 100644
index 0000000..866d1e1
--- /dev/null
+++ b/arch/arm/boot/dts/bcm911360k.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+ model = "Cygnus SVK (BCM911360K)";
+ compatible = "brcm,bcm11360", "brcm,cygnus";
+};
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
new file mode 100644
index 0000000..8739751
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+ model = "Cygnus SVK (BCM958300K)";
+ compatible = "brcm,bcm58300", "brcm,cygnus";
+};
--
1.7.9.5
remove menu "Broadcom Mobile SoC Selection"
This requires:
- selecting ARCH_BCM_MOBILE based on SoC selections
- fixup bcm_defconfig to work with new menu levels.
Signed-off-by: Scott Branden <[email protected]>
---
arch/arm/configs/bcm_defconfig | 3 ++-
arch/arm/configs/multi_v7_defconfig | 3 ++-
arch/arm/mach-bcm/Kconfig | 26 ++++++++++----------------
3 files changed, 14 insertions(+), 18 deletions(-)
diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig
index bc614f4..83a87e4 100644
--- a/arch/arm/configs/bcm_defconfig
+++ b/arch/arm/configs/bcm_defconfig
@@ -25,7 +25,8 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_MOBILE=y
+CONFIG_ARCH_BCM_21664=y
+CONFIG_ARCH_BCM_281XX=y
CONFIG_ARM_THUMBEE=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 491b7d5..e8f79fd 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -17,7 +17,8 @@ CONFIG_MACH_ARMADA_38X=y
CONFIG_MACH_ARMADA_XP=y
CONFIG_MACH_DOVE=y
CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_MOBILE=y
+CONFIG_ARCH_BCM_21664=y
+CONFIG_ARCH_BCM_281XX=y
CONFIG_ARCH_BCM_5301X=y
CONFIG_ARCH_BRCMSTB=y
CONFIG_ARCH_BERLIN=y
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 6e79696..cceb69f 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -51,8 +51,10 @@ config ARCH_BCM_5301X
different SoC or with the older BCM47XX and BCM53XX based
network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
+comment "KONA architected SoCs"
+
config ARCH_BCM_MOBILE
- bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
+ bool
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_754322
select ARM_ERRATA_775420
@@ -61,16 +63,13 @@ config ARCH_BCM_MOBILE
select TICK_ONESHOT
select HAVE_ARM_ARCH_TIMER
select PINCTRL
+ select ARCH_BCM_MOBILE_SMP if SMP
help
This enables support for systems based on Broadcom mobile SoCs.
-if ARCH_BCM_MOBILE
-
-menu "Broadcom Mobile SoC Selection"
-
config ARCH_BCM_281XX
bool "Broadcom BCM281XX SoC family"
- default y
+ select ARCH_BCM_MOBILE
select HAVE_SMP
help
Enable support for the BCM281XX family, which includes
@@ -79,7 +78,7 @@ config ARCH_BCM_281XX
config ARCH_BCM_21664
bool "Broadcom BCM21664 SoC family"
- default y
+ select ARCH_BCM_MOBILE
select HAVE_SMP
help
Enable support for the BCM21664 family, which includes
@@ -87,19 +86,18 @@ config ARCH_BCM_21664
config ARCH_BCM_MOBILE_L2_CACHE
bool "Broadcom mobile SoC level 2 cache support"
- depends on (ARCH_BCM_281XX || ARCH_BCM_21664)
+ depends on ARCH_BCM_MOBILE
default y
select CACHE_L2X0
select ARCH_BCM_MOBILE_SMC
config ARCH_BCM_MOBILE_SMC
bool
- depends on ARCH_BCM_281XX || ARCH_BCM_21664
+ depends on ARCH_BCM_MOBILE
config ARCH_BCM_MOBILE_SMP
- bool "Broadcom mobile SoC SMP support"
- depends on (ARCH_BCM_281XX || ARCH_BCM_21664) && SMP
- default y
+ bool
+ depends on ARCH_BCM_MOBILE
select HAVE_ARM_SCU
select ARM_ERRATA_764369
help
@@ -107,10 +105,6 @@ config ARCH_BCM_MOBILE_SMP
Provided as an option so SMP support for SoCs of this type
can be disabled for an SMP-enabled kernel.
-endmenu
-
-endif
-
comment "Other Architectures"
config ARCH_BCM2835
--
1.7.9.5
Move ARCH_BCM_5301X subarch under ARCH_IPROC architecture.
Additional IPROC chipsets that share a lot of commonality should be
added under ARCH_IPROC as well.
Signed-off-by: Scott Branden <[email protected]>
---
arch/arm/mach-bcm/Kconfig | 37 ++++++++++++++++---------------------
1 file changed, 16 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 73d95c2..6e79696 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -35,6 +35,22 @@ config ARCH_BCM_CYGNUS
BCM11300, BCM11320, BCM11350, BCM11360,
BCM58300, BCM58302, BCM58303, BCM58305.
+config ARCH_BCM_5301X
+ bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+ select ARCH_BCM_IPROC
+ help
+ Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
+
+ This is a network SoC line mostly used in home routers and
+ wifi access points, it's internal name is Northstar.
+ This inclused the following SoC: BCM53010, BCM53011, BCM53012,
+ BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
+ BCM4708 and BCM4709.
+
+ Do not confuse this with the BCM4760 which is a totally
+ different SoC or with the older BCM47XX and BCM53XX based
+ network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
+
config ARCH_BCM_MOBILE
bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
@@ -110,27 +126,6 @@ config ARCH_BCM2835
This enables support for the Broadcom BCM2835 SoC. This SoC is
used in the Raspberry Pi and Roku 2 devices.
-config ARCH_BCM_5301X
- bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
- select ARM_GIC
- select CACHE_L2X0
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select ARM_GLOBAL_TIMER
- select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
- help
- Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
-
- This is a network SoC line mostly used in home routers and
- wifi access points, it's internal name is Northstar.
- This inclused the following SoC: BCM53010, BCM53011, BCM53012,
- BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
- BCM4708 and BCM4709.
-
- Do not confuse this with the BCM4760 which is a totally
- different SoC or with the older BCM47XX and BCM53XX based
- network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
-
config ARCH_BCM_63XX
bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7
depends on MMU
--
1.7.9.5
From: Jonathan Richardson <[email protected]>
Adds initial support for the Cygnus SoC based on Broadcom’s iProc series.
Reviewed-by: Ray Jui <[email protected]>
Reviewed-by: Desmond Liu <[email protected]>
Reviewed-by: JD (Jiandong) Zheng <[email protected]>
Tested-by: Jonathan Richardson <[email protected]>
Signed-off-by: Scott Branden <[email protected]>
---
arch/arm/mach-bcm/Kconfig | 32 ++++++++++++++++++++++++++++++++
arch/arm/mach-bcm/Makefile | 3 +++
arch/arm/mach-bcm/bcm_cygnus.c | 26 ++++++++++++++++++++++++++
3 files changed, 61 insertions(+)
create mode 100644 arch/arm/mach-bcm/bcm_cygnus.c
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 2abad74..73d95c2 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -5,6 +5,36 @@ menuconfig ARCH_BCM
if ARCH_BCM
+comment "IPROC architected SoCs"
+
+config ARCH_BCM_IPROC
+ bool
+ select ARM_GIC
+ select CACHE_L2X0
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if SMP
+ select ARM_GLOBAL_TIMER
+
+ select CLKSRC_MMIO
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select PINCTRL
+ help
+ This enables support for systems based on Broadcom IPROC architected SoCs.
+ The IPROC complex contains one or more ARM CPUs along with common
+ core periperals. Application specific SoCs are created by adding a
+ uArchitecture containing peripherals outside of the IPROC complex.
+ Currently supported SoCs are Cygnus.
+
+config ARCH_BCM_CYGNUS
+ bool "Broadcom Cygnus Support" if ARCH_MULTI_V7
+ select ARCH_BCM_IPROC
+ help
+ Enable support for the Cygnus family,
+ which includes the following variants:
+ BCM11300, BCM11320, BCM11350, BCM11360,
+ BCM58300, BCM58302, BCM58303, BCM58305.
+
config ARCH_BCM_MOBILE
bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
@@ -65,6 +95,8 @@ endmenu
endif
+comment "Other Architectures"
+
config ARCH_BCM2835
bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 300ae4b..34d45ba 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -10,6 +10,9 @@
# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
+# Cygnus
+obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o
+
# BCM281XX
obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
diff --git a/arch/arm/mach-bcm/bcm_cygnus.c b/arch/arm/mach-bcm/bcm_cygnus.c
new file mode 100644
index 0000000..41b4933
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm_cygnus.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char const *bcm_cygnus_dt_compat[] = {
+ "brcm,cygnus",
+ NULL,
+};
+
+DT_MACHINE_START(BCM_CYGNUS_DT, "Broadcom Cygnus SoC")
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
+ .dt_compat = bcm_cygnus_dt_compat,
+MACHINE_END
--
1.7.9.5
On Wednesday 22 October 2014 13:57:51 Scott Branden wrote:
> +
> + aliases {
> + serial0 = &uart3;
> + serial1 = &uart0;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,115200 earlyprintk debug";
> + };
>
Please move the 'aliases' and 'chosen' node into the .dts files, these
are board specific, not SoC specific.
For chosen, please remove earlyprintk and debug, which don't normally
make sense unless you are debugging, and which will break in a multiplatform
kernel.
Please also add an "stdout-path = &uart3" property in chosen so that
earlycon can work. Note that earlycon is currently broken on arm32,
but we'll get there.
Arnd
Thanks for the review. Will send out v8 version. Hopefully for finally
approval.
On 14-10-28 09:10 AM, Arnd Bergmann wrote:
> On Wednesday 22 October 2014 13:57:51 Scott Branden wrote:
>> +
>> + aliases {
>> + serial0 = &uart3;
>> + serial1 = &uart0;
>> + };
>> +
>> + chosen {
>> + bootargs = "console=ttyS0,115200 earlyprintk debug";
>> + };
>>
>
> Please move the 'aliases' and 'chosen' node into the .dts files, these
> are board specific, not SoC specific.
ok.
>
> For chosen, please remove earlyprintk and debug, which don't normally
> make sense unless you are debugging, and which will break in a multiplatform
> kernel.
ok.
>
> Please also add an "stdout-path = &uart3" property in chosen so that
> earlycon can work. Note that earlycon is currently broken on arm32,
> but we'll get there.
ok.
>
> Arnd
>