2014-10-23 08:16:27

by Alexandre Courbot

[permalink] [raw]
Subject: [PATCH] drm/panel: ld9040: Update calls to gpiod_get*()

Add the new flags argument to calls of (devm_)gpiod_get*() and
remove any direction setting code afterwards.

Currently both forms (with or without the flags argument)
are valid thanks to transitional macros in
<linux/gpio/consumer.h>. These macros will be removed once
all consumers are updated and the flags argument will become
compulsary.

Signed-off-by: Alexandre Courbot <[email protected]>
---
drivers/gpu/drm/panel/panel-ld9040.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-ld9040.c b/drivers/gpu/drm/panel/panel-ld9040.c
index 42ac67b21e9f..dd1d3f2e624e 100644
--- a/drivers/gpu/drm/panel/panel-ld9040.c
+++ b/drivers/gpu/drm/panel/panel-ld9040.c
@@ -336,17 +336,12 @@ static int ld9040_probe(struct spi_device *spi)
if (ret < 0)
return ret;

- ctx->reset_gpio = devm_gpiod_get(dev, "reset");
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(ctx->reset_gpio)) {
dev_err(dev, "cannot get reset-gpios %ld\n",
PTR_ERR(ctx->reset_gpio));
return PTR_ERR(ctx->reset_gpio);
}
- ret = gpiod_direction_output(ctx->reset_gpio, 1);
- if (ret < 0) {
- dev_err(dev, "cannot configure reset-gpios %d\n", ret);
- return ret;
- }

spi->bits_per_word = 9;
ret = spi_setup(spi);
--
2.1.2


2014-10-23 09:45:53

by Andrzej Hajda

[permalink] [raw]
Subject: Re: [PATCH] drm/panel: ld9040: Update calls to gpiod_get*()

On 10/23/2014 10:16 AM, Alexandre Courbot wrote:
> Add the new flags argument to calls of (devm_)gpiod_get*() and
> remove any direction setting code afterwards.
>
> Currently both forms (with or without the flags argument)
> are valid thanks to transitional macros in
> <linux/gpio/consumer.h>. These macros will be removed once
> all consumers are updated and the flags argument will become
> compulsary.
>
> Signed-off-by: Alexandre Courbot <[email protected]>

It needs patch "gpio: Fix gpio direction flags not getting set" to work
correctly. It is not yet present in drm-next. Beside this:

Acked-by: Andrzej Hajda <[email protected]>

--
Regards
Andrzej

> ---
> drivers/gpu/drm/panel/panel-ld9040.c | 7 +------
> 1 file changed, 1 insertion(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-ld9040.c b/drivers/gpu/drm/panel/panel-ld9040.c
> index 42ac67b21e9f..dd1d3f2e624e 100644
> --- a/drivers/gpu/drm/panel/panel-ld9040.c
> +++ b/drivers/gpu/drm/panel/panel-ld9040.c
> @@ -336,17 +336,12 @@ static int ld9040_probe(struct spi_device *spi)
> if (ret < 0)
> return ret;
>
> - ctx->reset_gpio = devm_gpiod_get(dev, "reset");
> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> if (IS_ERR(ctx->reset_gpio)) {
> dev_err(dev, "cannot get reset-gpios %ld\n",
> PTR_ERR(ctx->reset_gpio));
> return PTR_ERR(ctx->reset_gpio);
> }
> - ret = gpiod_direction_output(ctx->reset_gpio, 1);
> - if (ret < 0) {
> - dev_err(dev, "cannot configure reset-gpios %d\n", ret);
> - return ret;
> - }
>
> spi->bits_per_word = 9;
> ret = spi_setup(spi);
>

2014-11-06 03:33:11

by Alexandre Courbot

[permalink] [raw]
Subject: Re: [PATCH] drm/panel: ld9040: Update calls to gpiod_get*()

On Thu, Oct 23, 2014 at 6:45 PM, Andrzej Hajda <[email protected]> wrote:
> On 10/23/2014 10:16 AM, Alexandre Courbot wrote:
>> Add the new flags argument to calls of (devm_)gpiod_get*() and
>> remove any direction setting code afterwards.
>>
>> Currently both forms (with or without the flags argument)
>> are valid thanks to transitional macros in
>> <linux/gpio/consumer.h>. These macros will be removed once
>> all consumers are updated and the flags argument will become
>> compulsary.
>>
>> Signed-off-by: Alexandre Courbot <[email protected]>
>
> It needs patch "gpio: Fix gpio direction flags not getting set" to work
> correctly. It is not yet present in drm-next. Beside this:
>
> Acked-by: Andrzej Hajda <[email protected]>

The required patch is now merged, can we go on with this patch?

2014-11-06 07:26:53

by Andrzej Hajda

[permalink] [raw]
Subject: Re: [PATCH] drm/panel: ld9040: Update calls to gpiod_get*()

On 11/06/2014 04:32 AM, Alexandre Courbot wrote:
> On Thu, Oct 23, 2014 at 6:45 PM, Andrzej Hajda <[email protected]> wrote:
>> On 10/23/2014 10:16 AM, Alexandre Courbot wrote:
>>> Add the new flags argument to calls of (devm_)gpiod_get*() and
>>> remove any direction setting code afterwards.
>>>
>>> Currently both forms (with or without the flags argument)
>>> are valid thanks to transitional macros in
>>> <linux/gpio/consumer.h>. These macros will be removed once
>>> all consumers are updated and the flags argument will become
>>> compulsary.
>>>
>>> Signed-off-by: Alexandre Courbot <[email protected]>
>> It needs patch "gpio: Fix gpio direction flags not getting set" to work
>> correctly. It is not yet present in drm-next. Beside this:
>>
>> Acked-by: Andrzej Hajda <[email protected]>
> The required patch is now merged, can we go on with this patch?
>
Yes, for both panels. Thanks.

Regards
Andrzej

2014-11-06 08:51:28

by Thierry Reding

[permalink] [raw]
Subject: Re: [PATCH] drm/panel: ld9040: Update calls to gpiod_get*()

On Thu, Oct 23, 2014 at 05:16:17PM +0900, Alexandre Courbot wrote:
> Add the new flags argument to calls of (devm_)gpiod_get*() and
> remove any direction setting code afterwards.
>
> Currently both forms (with or without the flags argument)
> are valid thanks to transitional macros in
> <linux/gpio/consumer.h>. These macros will be removed once
> all consumers are updated and the flags argument will become
> compulsary.
>
> Signed-off-by: Alexandre Courbot <[email protected]>
> ---
> drivers/gpu/drm/panel/panel-ld9040.c | 7 +------
> 1 file changed, 1 insertion(+), 6 deletions(-)

Applied, thanks.

Thierry


Attachments:
(No filename) (621.00 B)
(No filename) (819.00 B)
Download all attachments