From: Chao Xie <[email protected]>
The patch set focuses at support device tree for clock.
The first part of the patches
clk: mmp: add prefix "mmp" for structures defined for clk-frac
clk: mmp: add spin lock for clk-frac
clk: mmp: add init callback for clk-frac
clk: mmp: move definiton of mmp_clk_frac to clk.h It enhances the clk-frac.
The second part of the patches
clk: mmp: add clock type mix
clk: mmp: add mmp private gate clock
The third part of the patches
clk: mmp: add basic support functions for DT support
clk: mmp: add reset support
clk: mmp: add pxa168 DT support for clock driver
clk: mmp: add pxa910 DT support for clock driver
clk: mmp: add mmp2 DT support for clock driver
It add the device tree support for pxa168, pxa910 and mmp2.
V1 -> V2:
Add reset support for the clocks that have reset bit.
Chao Xie (13):
clk: mmp: add prefix "mmp" for structures defined for clk-frac
clk: mmp: add spin lock for clk-frac
clk: mmp: add init callback for clk-frac
clk: mmp: move definiton of mmp_clk_frac to clk.h
clk: mmp: add clock type mix
clk: mmp: add mmp private gate clock
clk: mmp: add basic support functions for DT support
clk: mmp: add reset support
clk: mmp: add pxa168 DT support for clock driver
clk: mmp: add pxa910 DT support for clock driver
clk: mmp: add mmp2 DT support for clock driver
arm: mmp: Make all the dts file to be compiled by Makefile
arm: mmp: Make use of the DT supported clock
.../devicetree/bindings/clock/marvell,mmp2.txt | 21 +
.../devicetree/bindings/clock/marvell,pxa168.txt | 21 +
.../devicetree/bindings/clock/marvell,pxa910.txt | 21 +
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/mmp2-brownstone.dts | 2 +-
arch/arm/boot/dts/mmp2.dtsi | 29 +-
arch/arm/boot/dts/pxa168-aspenite.dts | 2 +-
arch/arm/boot/dts/pxa168.dtsi | 27 +-
arch/arm/boot/dts/pxa910-dkb.dts | 2 +-
arch/arm/boot/dts/pxa910.dtsi | 28 +-
arch/arm/mach-mmp/Kconfig | 12 +-
arch/arm/mach-mmp/mmp-dt.c | 57 +--
arch/arm/mach-mmp/mmp2-dt.c | 26 +-
drivers/clk/mmp/Makefile | 7 +-
drivers/clk/mmp/clk-frac.c | 74 ++-
drivers/clk/mmp/clk-gate.c | 133 ++++++
drivers/clk/mmp/clk-mix.c | 513 +++++++++++++++++++++
drivers/clk/mmp/clk-mmp2.c | 6 +-
drivers/clk/mmp/clk-of-mmp2.c | 334 ++++++++++++++
drivers/clk/mmp/clk-of-pxa168.c | 279 +++++++++++
drivers/clk/mmp/clk-of-pxa910.c | 301 ++++++++++++
drivers/clk/mmp/clk-pxa168.c | 6 +-
drivers/clk/mmp/clk-pxa910.c | 6 +-
drivers/clk/mmp/clk.c | 192 ++++++++
drivers/clk/mmp/clk.h | 226 ++++++++-
drivers/clk/mmp/reset.c | 99 ++++
drivers/clk/mmp/reset.h | 31 ++
include/dt-bindings/clock/marvell,mmp2.h | 74 +++
include/dt-bindings/clock/marvell,pxa168.h | 57 +++
include/dt-bindings/clock/marvell,pxa910.h | 54 +++
30 files changed, 2538 insertions(+), 105 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/marvell,mmp2.txt
create mode 100644 Documentation/devicetree/bindings/clock/marvell,pxa168.txt
create mode 100644 Documentation/devicetree/bindings/clock/marvell,pxa910.txt
create mode 100644 drivers/clk/mmp/clk-gate.c
create mode 100644 drivers/clk/mmp/clk-mix.c
create mode 100644 drivers/clk/mmp/clk-of-mmp2.c
create mode 100644 drivers/clk/mmp/clk-of-pxa168.c
create mode 100644 drivers/clk/mmp/clk-of-pxa910.c
create mode 100644 drivers/clk/mmp/clk.c
create mode 100644 drivers/clk/mmp/reset.c
create mode 100644 drivers/clk/mmp/reset.h
create mode 100644 include/dt-bindings/clock/marvell,mmp2.h
create mode 100644 include/dt-bindings/clock/marvell,pxa168.h
create mode 100644 include/dt-bindings/clock/marvell,pxa910.h
--
1.8.3.2
From: Chao Xie <[email protected]>
The clock type mix is a kind of clock combines "div" and "mux".
This kind of clock can not allow to change div first then
mux or change mux first or div.
The reason is
1. Some clock has frequency change bit. Each time want to change
the frequency, there are some operations based on this bit, and
these operations are time-cost.
Seperating div and mux change will make the process longer, and
waste more time.
2. Seperting the div and mux may generate middle clock that the
peripharals do not support. It may make the peripharals hang.
There are three kinds of this type of clock in all SOCes.
1. The clock has bit to trigger the frequency change.
2. Same as #1, but the operations for the bit is different
3. Do not have frequency change bit.
So this type of clock has implemented the callbacks
->determine_rate
->set_rate_and_parent
These callbacks can help to change the div and mux together.
Signed-off-by: Chao Xie <[email protected]>
---
drivers/clk/mmp/Makefile | 2 +-
drivers/clk/mmp/clk-mix.c | 513 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/mmp/clk.h | 66 ++++++
3 files changed, 580 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/mmp/clk-mix.c
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 392d780..8bfee860 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -2,7 +2,7 @@
# Makefile for mmp specific clk
#
-obj-y += clk-apbc.o clk-apmu.o clk-frac.o
+obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
diff --git a/drivers/clk/mmp/clk-mix.c b/drivers/clk/mmp/clk-mix.c
new file mode 100644
index 0000000..b79742c
--- /dev/null
+++ b/drivers/clk/mmp/clk-mix.c
@@ -0,0 +1,513 @@
+/*
+ * mmp mix(div and mux) clock operation source file
+ *
+ * Copyright (C) 2014 Marvell
+ * Chao Xie <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+#include "clk.h"
+
+/*
+ * The mix clock is a clock combined mux and div type clock.
+ * Because the div field and mux field need to be set at same
+ * time, we can not divide it into 2 types of clock
+ */
+
+#define to_clk_mix(hw) container_of(hw, struct mmp_clk_mix, hw)
+
+static unsigned int _get_maxdiv(struct mmp_clk_mix *mix)
+{
+ unsigned int div_mask = (1 << mix->reg_info.width_div) - 1;
+ unsigned int maxdiv = 0;
+ struct clk_div_table *clkt;
+
+ if (mix->div_flags & CLK_DIVIDER_ONE_BASED)
+ return div_mask;
+ if (mix->div_flags & CLK_DIVIDER_POWER_OF_TWO)
+ return 1 << div_mask;
+ if (mix->div_table) {
+ for (clkt = mix->div_table; clkt->div; clkt++)
+ if (clkt->div > maxdiv)
+ maxdiv = clkt->div;
+ return maxdiv;
+ }
+ return div_mask + 1;
+}
+
+static unsigned int _get_div(struct mmp_clk_mix *mix, unsigned int val)
+{
+ struct clk_div_table *clkt;
+
+ if (mix->div_flags & CLK_DIVIDER_ONE_BASED)
+ return val;
+ if (mix->div_flags & CLK_DIVIDER_POWER_OF_TWO)
+ return 1 << val;
+ if (mix->div_table) {
+ for (clkt = mix->div_table; clkt->div; clkt++)
+ if (clkt->val == val)
+ return clkt->div;
+ if (clkt->div == 0)
+ return 0;
+ }
+ return val + 1;
+}
+
+static unsigned int _get_mux(struct mmp_clk_mix *mix, unsigned int val)
+{
+ int num_parents = __clk_get_num_parents(mix->hw.clk);
+ int i;
+
+ if (mix->mux_flags & CLK_MUX_INDEX_BIT)
+ return ffs(val) - 1;
+ if (mix->mux_flags & CLK_MUX_INDEX_ONE)
+ return val - 1;
+ if (mix->mux_table) {
+ for (i = 0; i < num_parents; i++)
+ if (mix->mux_table[i] == val)
+ return i;
+ if (i == num_parents)
+ return 0;
+ }
+
+ return val;
+}
+static unsigned int _get_div_val(struct mmp_clk_mix *mix, unsigned int div)
+{
+ struct clk_div_table *clkt;
+
+ if (mix->div_flags & CLK_DIVIDER_ONE_BASED)
+ return div;
+ if (mix->div_flags & CLK_DIVIDER_POWER_OF_TWO)
+ return __ffs(div);
+ if (mix->div_table) {
+ for (clkt = mix->div_table; clkt->div; clkt++)
+ if (clkt->div == div)
+ return clkt->val;
+ if (clkt->div == 0)
+ return 0;
+ }
+
+ return div - 1;
+}
+
+static unsigned int _get_mux_val(struct mmp_clk_mix *mix, unsigned int mux)
+{
+ if (mix->mux_table)
+ return mix->mux_table[mux];
+
+ return mux;
+}
+
+static void _filter_clk_table(struct mmp_clk_mix *mix,
+ struct mmp_clk_mix_clk_table *table,
+ unsigned int table_size)
+{
+ int i;
+ struct mmp_clk_mix_clk_table *item;
+ struct clk *parent, *clk;
+ unsigned long parent_rate;
+
+ clk = mix->hw.clk;
+
+ for (i = 0; i < table_size; i++) {
+ item = &table[i];
+ parent = clk_get_parent_by_index(clk, item->parent_index);
+ parent_rate = __clk_get_rate(parent);
+ if (parent_rate % item->rate) {
+ item->valid = 0;
+ } else {
+ item->divisor = parent_rate / item->rate;
+ item->valid = 1;
+ }
+ }
+}
+
+static int _set_rate(struct mmp_clk_mix *mix, u32 mux_val, u32 div_val,
+ unsigned int change_mux, unsigned int change_div)
+{
+ struct mmp_clk_mix_reg_info *ri = &mix->reg_info;
+ u8 width, shift;
+ u32 mux_div, fc_req;
+ int ret, timeout = 50;
+ unsigned long flags = 0;
+
+ if (!change_mux && !change_div)
+ return -EINVAL;
+
+ if (mix->lock)
+ spin_lock_irqsave(mix->lock, flags);
+
+ if (mix->type == MMP_CLK_MIX_TYPE_V1
+ || mix->type == MMP_CLK_MIX_TYPE_V2)
+ mux_div = readl(ri->reg_clk_ctrl);
+ else
+ mux_div = readl(ri->reg_clk_sel);
+
+ if (change_div) {
+ width = ri->width_div;
+ shift = ri->shift_div;
+ mux_div &= ~MMP_CLK_BITS_MASK(width, shift);
+ mux_div |= MMP_CLK_BITS_SET_VAL(div_val, width, shift);
+ }
+
+ if (change_mux) {
+ width = ri->width_mux;
+ shift = ri->shift_mux;
+ mux_div &= ~MMP_CLK_BITS_MASK(width, shift);
+ mux_div |= MMP_CLK_BITS_SET_VAL(mux_val, width, shift);
+ }
+
+ if (mix->type == MMP_CLK_MIX_TYPE_V1) {
+ writel(mux_div, ri->reg_clk_ctrl);
+ } else if (mix->type == MMP_CLK_MIX_TYPE_V2) {
+ mux_div |= (1 << ri->bit_fc);
+ writel(mux_div, ri->reg_clk_ctrl);
+
+ do {
+ fc_req = readl(ri->reg_clk_ctrl);
+ timeout--;
+ if (!(fc_req & (1 << ri->bit_fc)))
+ break;
+ } while (timeout);
+
+ if (timeout == 0) {
+ pr_err("%s:%s cannot do frequency change\n",
+ __func__, __clk_get_name(mix->hw.clk));
+ ret = -EBUSY;
+ goto error;
+ }
+ } else {
+ fc_req = readl(ri->reg_clk_ctrl);
+ fc_req |= 1 << ri->bit_fc;
+ writel(fc_req, ri->reg_clk_ctrl);
+ writel(mux_div, ri->reg_clk_sel);
+ fc_req &= ~(1 << ri->bit_fc);
+ }
+
+ ret = 0;
+error:
+ if (mix->lock)
+ spin_unlock_irqrestore(mix->lock, flags);
+
+ return ret;
+}
+
+static long mmp_clk_mix_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_clk)
+{
+ struct mmp_clk_mix *mix = to_clk_mix(hw);
+ struct mmp_clk_mix_clk_table *item;
+ struct clk *parent, *parent_best, *mix_clk;
+ unsigned long parent_rate, mix_rate, mix_rate_best, parent_rate_best;
+ unsigned long gap, gap_best;
+ u32 div_val_max;
+ unsigned int div;
+ int i, j;
+
+ mix_clk = hw->clk;
+
+ parent = NULL;
+ mix_rate_best = 0;
+ parent_rate_best = 0;
+ gap_best = rate;
+ parent_best = NULL;
+
+ if (mix->table) {
+ for (i = 0; i < mix->table_size; i++) {
+ item = &mix->table[i];
+ if (item->valid == 0)
+ continue;
+ parent = clk_get_parent_by_index(mix_clk,
+ item->parent_index);
+ parent_rate = __clk_get_rate(parent);
+ mix_rate = parent_rate / item->divisor;
+ gap = abs(mix_rate - rate);
+ if (parent_best == NULL || gap < gap_best) {
+ parent_best = parent;
+ parent_rate_best = parent_rate;
+ mix_rate_best = mix_rate;
+ gap_best = gap;
+ if (gap_best == 0)
+ goto found;
+ }
+ }
+ } else {
+ for (i = 0; i < __clk_get_num_parents(mix_clk); i++) {
+ parent = clk_get_parent_by_index(mix_clk, i);
+ parent_rate = __clk_get_rate(parent);
+ div_val_max = _get_maxdiv(mix);
+ for (j = 0; j < div_val_max; j++) {
+ div = _get_div(mix, j);
+ mix_rate = parent_rate / div;
+ gap = abs(mix_rate - rate);
+ if (parent_best == NULL || gap < gap_best) {
+ parent_best = parent;
+ parent_rate_best = parent_rate;
+ mix_rate_best = mix_rate;
+ gap_best = gap;
+ if (gap_best == 0)
+ goto found;
+ }
+ }
+ }
+ }
+
+found:
+ *best_parent_rate = parent_rate_best;
+ *best_parent_clk = parent_best;
+
+ return mix_rate_best;
+}
+
+static int mmp_clk_mix_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u8 index)
+{
+ struct mmp_clk_mix *mix = to_clk_mix(hw);
+ unsigned int div;
+ u32 div_val, mux_val;
+
+ div = parent_rate / rate;
+ div_val = _get_div_val(mix, div);
+ mux_val = _get_mux_val(mix, index);
+
+ return _set_rate(mix, mux_val, div_val, 1, 1);
+}
+
+static u8 mmp_clk_mix_get_parent(struct clk_hw *hw)
+{
+ struct mmp_clk_mix *mix = to_clk_mix(hw);
+ struct mmp_clk_mix_reg_info *ri = &mix->reg_info;
+ unsigned long flags = 0;
+ u32 mux_div = 0;
+ u8 width, shift;
+ u32 mux_val;
+
+ if (mix->lock)
+ spin_lock_irqsave(mix->lock, flags);
+
+ if (mix->type == MMP_CLK_MIX_TYPE_V1
+ || mix->type == MMP_CLK_MIX_TYPE_V2)
+ mux_div = readl(ri->reg_clk_ctrl);
+ else
+ mux_div = readl(ri->reg_clk_sel);
+
+ if (mix->lock)
+ spin_unlock_irqrestore(mix->lock, flags);
+
+ width = mix->reg_info.width_mux;
+ shift = mix->reg_info.shift_mux;
+
+ mux_val = MMP_CLK_BITS_GET_VAL(mux_div, width, shift);
+
+ return _get_mux(mix, mux_val);
+}
+
+static unsigned long mmp_clk_mix_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct mmp_clk_mix *mix = to_clk_mix(hw);
+ struct mmp_clk_mix_reg_info *ri = &mix->reg_info;
+ unsigned long flags = 0;
+ u32 mux_div = 0;
+ u8 width, shift;
+ unsigned int div;
+
+ if (mix->lock)
+ spin_lock_irqsave(mix->lock, flags);
+
+ if (mix->type == MMP_CLK_MIX_TYPE_V1
+ || mix->type == MMP_CLK_MIX_TYPE_V2)
+ mux_div = readl(ri->reg_clk_ctrl);
+ else
+ mux_div = readl(ri->reg_clk_sel);
+
+ if (mix->lock)
+ spin_unlock_irqrestore(mix->lock, flags);
+
+ width = mix->reg_info.width_div;
+ shift = mix->reg_info.shift_div;
+
+ div = _get_div(mix, MMP_CLK_BITS_GET_VAL(mux_div, width, shift));
+
+ return parent_rate / div;
+}
+
+static int mmp_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct mmp_clk_mix *mix = to_clk_mix(hw);
+ struct mmp_clk_mix_clk_table *item;
+ int i;
+ u32 div_val, mux_val;
+
+ if (mix->table) {
+ for (i = 0; i < mix->table_size; i++) {
+ item = &mix->table[i];
+ if (item->valid == 0)
+ continue;
+ if (item->parent_index == index)
+ break;
+ }
+ if (i < mix->table_size) {
+ div_val = _get_div_val(mix, item->divisor);
+ mux_val = _get_mux_val(mix, item->parent_index);
+ } else
+ return -EINVAL;
+ } else {
+ mux_val = _get_mux_val(mix, index);
+ div_val = 0;
+ }
+
+ return _set_rate(mix, mux_val, div_val, 1, div_val ? 1 : 0);
+}
+
+static int mmp_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long best_parent_rate)
+{
+ struct mmp_clk_mix *mix = to_clk_mix(hw);
+ struct mmp_clk_mix_clk_table *item;
+ unsigned long parent_rate;
+ unsigned int best_divisor;
+ struct clk *mix_clk, *parent;
+ int i;
+
+ best_divisor = best_parent_rate / rate;
+
+ mix_clk = hw->clk;
+ if (mix->table) {
+ for (i = 0; i < mix->table_size; i++) {
+ item = &mix->table[i];
+ if (item->valid == 0)
+ continue;
+ parent = clk_get_parent_by_index(mix_clk,
+ item->parent_index);
+ parent_rate = __clk_get_rate(parent);
+ if (parent_rate == best_parent_rate
+ && item->divisor == best_divisor)
+ break;
+ }
+ if (i < mix->table_size)
+ return _set_rate(mix,
+ _get_mux_val(mix, item->parent_index),
+ _get_div_val(mix, item->divisor),
+ 1, 1);
+ else
+ return -EINVAL;
+ } else {
+ for (i = 0; i < __clk_get_num_parents(mix_clk); i++) {
+ parent = clk_get_parent_by_index(mix_clk, i);
+ parent_rate = __clk_get_rate(parent);
+ if (parent_rate == best_parent_rate)
+ break;
+ }
+ if (i < __clk_get_num_parents(mix_clk))
+ return _set_rate(mix, _get_mux_val(mix, i),
+ _get_div_val(mix, best_divisor), 1, 1);
+ else
+ return -EINVAL;
+ }
+}
+
+static void mmp_clk_mix_init(struct clk_hw *hw)
+{
+ struct mmp_clk_mix *mix = to_clk_mix(hw);
+
+ if (mix->table)
+ _filter_clk_table(mix, mix->table, mix->table_size);
+}
+
+const struct clk_ops mmp_clk_mix_ops = {
+ .determine_rate = mmp_clk_mix_determine_rate,
+ .set_rate_and_parent = mmp_clk_mix_set_rate_and_parent,
+ .set_rate = mmp_clk_set_rate,
+ .set_parent = mmp_clk_set_parent,
+ .get_parent = mmp_clk_mix_get_parent,
+ .recalc_rate = mmp_clk_mix_recalc_rate,
+ .init = mmp_clk_mix_init,
+};
+
+struct clk *mmp_clk_register_mix(struct device *dev,
+ const char *name,
+ const char **parent_names,
+ u8 num_parents,
+ unsigned long flags,
+ struct mmp_clk_mix_config *config,
+ spinlock_t *lock)
+{
+ struct mmp_clk_mix *mix;
+ struct clk *clk;
+ struct clk_init_data init;
+ size_t table_bytes;
+
+ mix = kzalloc(sizeof(*mix), GFP_KERNEL);
+ if (!mix) {
+ pr_err("%s:%s: could not allocate mmp mix clk\n",
+ __func__, name);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.flags = flags | CLK_GET_RATE_NOCACHE;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+ init.ops = &mmp_clk_mix_ops;
+
+ memcpy(&mix->reg_info, &config->reg_info, sizeof(config->reg_info));
+ if (config->table) {
+ table_bytes = sizeof(*config->table) * config->table_size;
+ mix->table = kzalloc(table_bytes, GFP_KERNEL);
+ if (!mix->table) {
+ pr_err("%s:%s: could not allocate mmp mix table\n",
+ __func__, name);
+ kfree(mix);
+ return ERR_PTR(-ENOMEM);
+ }
+ memcpy(mix->table, config->table, table_bytes);
+ mix->table_size = config->table_size;
+ }
+
+ if (config->mux_table) {
+ table_bytes = sizeof(u32) * num_parents;
+ mix->mux_table = kzalloc(table_bytes, GFP_KERNEL);
+ if (!mix->mux_table) {
+ pr_err("%s:%s: could not allocate mmp mix mux-table\n",
+ __func__, name);
+ kfree(mix->table);
+ kfree(mix);
+ return ERR_PTR(-ENOMEM);
+ }
+ memcpy(mix->mux_table, config->mux_table, table_bytes);
+ }
+
+ mix->div_flags = config->div_flags;
+ mix->mux_flags = config->mux_flags;
+ mix->lock = lock;
+ mix->hw.init = &init;
+
+ if (config->reg_info.bit_fc >= 32)
+ mix->type = MMP_CLK_MIX_TYPE_V1;
+ else if (config->reg_info.reg_clk_sel)
+ mix->type = MMP_CLK_MIX_TYPE_V3;
+ else
+ mix->type = MMP_CLK_MIX_TYPE_V2;
+ clk = clk_register(dev, &mix->hw);
+
+ if (IS_ERR(clk)) {
+ kfree(mix->mux_table);
+ kfree(mix->table);
+ kfree(mix);
+ }
+
+ return clk;
+}
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index d267639..26b2469 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -37,6 +37,72 @@ extern struct clk *mmp_clk_register_factor(const char *name,
struct mmp_clk_factor_tbl *ftbl, unsigned int ftbl_cnt,
spinlock_t *lock);
+/* Clock type "mix" */
+#define MMP_CLK_BITS_MASK(width, shift) \
+ (((1 << (width)) - 1) << (shift))
+#define MMP_CLK_BITS_GET_VAL(data, width, shift) \
+ ((data & MMP_CLK_BITS_MASK(width, shift)) >> (shift))
+#define MMP_CLK_BITS_SET_VAL(val, width, shift) \
+ (((val) << (shift)) & MMP_CLK_BITS_MASK(width, shift))
+
+enum {
+ MMP_CLK_MIX_TYPE_V1,
+ MMP_CLK_MIX_TYPE_V2,
+ MMP_CLK_MIX_TYPE_V3,
+};
+
+/* The register layout */
+struct mmp_clk_mix_reg_info {
+ void __iomem *reg_clk_ctrl;
+ void __iomem *reg_clk_sel;
+ u8 width_div;
+ u8 shift_div;
+ u8 width_mux;
+ u8 shift_mux;
+ u8 bit_fc;
+};
+
+/* The suggested clock table from user. */
+struct mmp_clk_mix_clk_table {
+ unsigned long rate;
+ u8 parent_index;
+ unsigned int divisor;
+ unsigned int valid;
+};
+
+struct mmp_clk_mix_config {
+ struct mmp_clk_mix_reg_info reg_info;
+ struct mmp_clk_mix_clk_table *table;
+ unsigned int table_size;
+ u32 *mux_table;
+ struct clk_div_table *div_table;
+ u8 div_flags;
+ u8 mux_flags;
+};
+
+struct mmp_clk_mix {
+ struct clk_hw hw;
+ struct mmp_clk_mix_reg_info reg_info;
+ struct mmp_clk_mix_clk_table *table;
+ u32 *mux_table;
+ struct clk_div_table *div_table;
+ unsigned int table_size;
+ u8 div_flags;
+ u8 mux_flags;
+ unsigned int type;
+ spinlock_t *lock;
+};
+
+extern const struct clk_ops mmp_clk_mix_ops;
+extern struct clk *mmp_clk_register_mix(struct device *dev,
+ const char *name,
+ u8 num_parents,
+ const char **parent_names,
+ unsigned long flags,
+ struct mmp_clk_mix_config *config,
+ spinlock_t *lock);
+
+
extern struct clk *mmp_clk_register_pll2(const char *name,
const char *parent_name, unsigned long flags);
extern struct clk *mmp_clk_register_apbc(const char *name,
--
1.8.3.2
From: Chao Xie <[email protected]>
Change the dtsi and dts file, soc initialization code to make
use of DT support clock.
So now in the code we do only need call of_clk_init to initialize
the clocks.
Signed-off-by: Chao Xie <[email protected]>
---
arch/arm/boot/dts/mmp2.dtsi | 27 ++++++++++++++++++++
arch/arm/boot/dts/pxa168.dtsi | 25 +++++++++++++++++++
arch/arm/boot/dts/pxa910.dtsi | 26 ++++++++++++++++++++
arch/arm/mach-mmp/Kconfig | 12 ++++-----
arch/arm/mach-mmp/mmp-dt.c | 57 ++++++++++++++-----------------------------
arch/arm/mach-mmp/mmp2-dt.c | 26 +++++++-------------
6 files changed, 111 insertions(+), 62 deletions(-)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index e44f996..766bbb8 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -8,6 +8,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/clock/marvell,mmp2.h>
/ {
aliases {
@@ -135,6 +136,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4030000 0x1000>;
interrupts = <27>;
+ clocks = <&soc_clocks MMP2_CLK_UART0>;
+ resets = <&soc_clocks MMP2_CLK_UART0>;
status = "disabled";
};
@@ -142,6 +145,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4017000 0x1000>;
interrupts = <28>;
+ clocks = <&soc_clocks MMP2_CLK_UART1>;
+ resets = <&soc_clocks MMP2_CLK_UART1>;
status = "disabled";
};
@@ -149,6 +154,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4018000 0x1000>;
interrupts = <24>;
+ clocks = <&soc_clocks MMP2_CLK_UART2>;
+ resets = <&soc_clocks MMP2_CLK_UART2>;
status = "disabled";
};
@@ -156,6 +163,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4016000 0x1000>;
interrupts = <46>;
+ clocks = <&soc_clocks MMP2_CLK_UART3>;
+ resets = <&soc_clocks MMP2_CLK_UART3>;
status = "disabled";
};
@@ -168,6 +177,8 @@
#gpio-cells = <2>;
interrupts = <49>;
interrupt-names = "gpio_mux";
+ clocks = <&soc_clocks MMP2_CLK_GPIO>;
+ resets = <&soc_clocks MMP2_CLK_GPIO>;
interrupt-controller;
#interrupt-cells = <1>;
ranges;
@@ -201,6 +212,8 @@
compatible = "mrvl,mmp-twsi";
reg = <0xd4011000 0x1000>;
interrupts = <7>;
+ clocks = <&soc_clocks MMP2_CLK_TWSI0>;
+ resets = <&soc_clocks MMP2_CLK_TWSI0>;
#address-cells = <1>;
#size-cells = <0>;
mrvl,i2c-fast-mode;
@@ -211,6 +224,8 @@
compatible = "mrvl,mmp-twsi";
reg = <0xd4025000 0x1000>;
interrupts = <58>;
+ clocks = <&soc_clocks MMP2_CLK_TWSI1>;
+ resets = <&soc_clocks MMP2_CLK_TWSI1>;
status = "disabled";
};
@@ -220,8 +235,20 @@
interrupts = <1 0>;
interrupt-names = "rtc 1Hz", "rtc alarm";
interrupt-parent = <&intcmux5>;
+ clocks = <&soc_clocks MMP2_CLK_RTC>;
+ resets = <&soc_clocks MMP2_CLK_RTC>;
status = "disabled";
};
};
+
+ soc_clocks: clocks{
+ compatible = "marvell,mmp2-clock";
+ reg = <0xd4050000 0x1000>,
+ <0xd4282800 0x400>,
+ <0xd4015000 0x1000>;
+ reg-names = "mpmu", "apmu", "apbc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
};
};
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
index bfcbdef..b899e25 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -8,6 +8,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/clock/marvell,pxa168.h>
/ {
aliases {
@@ -59,6 +60,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4017000 0x1000>;
interrupts = <27>;
+ clocks = <&soc_clocks PXA168_CLK_UART0>;
+ resets = <&soc_clocks PXA168_CLK_UART0>;
status = "disabled";
};
@@ -66,6 +69,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4018000 0x1000>;
interrupts = <28>;
+ clocks = <&soc_clocks PXA168_CLK_UART1>;
+ resets = <&soc_clocks PXA168_CLK_UART1>;
status = "disabled";
};
@@ -73,6 +78,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4026000 0x1000>;
interrupts = <29>;
+ clocks = <&soc_clocks PXA168_CLK_UART2>;
+ resets = <&soc_clocks PXA168_CLK_UART2>;
status = "disabled";
};
@@ -84,6 +91,8 @@
gpio-controller;
#gpio-cells = <2>;
interrupts = <49>;
+ clocks = <&soc_clocks PXA168_CLK_GPIO>;
+ resets = <&soc_clocks PXA168_CLK_GPIO>;
interrupt-names = "gpio_mux";
interrupt-controller;
#interrupt-cells = <1>;
@@ -110,6 +119,8 @@
compatible = "mrvl,mmp-twsi";
reg = <0xd4011000 0x1000>;
interrupts = <7>;
+ clocks = <&soc_clocks PXA168_CLK_TWSI0>;
+ resets = <&soc_clocks PXA168_CLK_TWSI0>;
mrvl,i2c-fast-mode;
status = "disabled";
};
@@ -118,6 +129,8 @@
compatible = "mrvl,mmp-twsi";
reg = <0xd4025000 0x1000>;
interrupts = <58>;
+ clocks = <&soc_clocks PXA168_CLK_TWSI1>;
+ resets = <&soc_clocks PXA168_CLK_TWSI1>;
status = "disabled";
};
@@ -126,8 +139,20 @@
reg = <0xd4010000 0x1000>;
interrupts = <5 6>;
interrupt-names = "rtc 1Hz", "rtc alarm";
+ clocks = <&soc_clocks PXA168_CLK_RTC>;
+ resets = <&soc_clocks PXA168_CLK_RTC>;
status = "disabled";
};
};
+
+ soc_clocks: clocks{
+ compatible = "marvell,pxa168-clock";
+ reg = <0xd4050000 0x1000>,
+ <0xd4282800 0x400>,
+ <0xd4015000 0x1000>;
+ reg-names = "mpmu", "apmu", "apbc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
};
};
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
index 884c6e8..0868f67 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -8,6 +8,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/clock/marvell,pxa910.h>
/ {
aliases {
@@ -71,6 +72,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4017000 0x1000>;
interrupts = <27>;
+ clocks = <&soc_clocks PXA910_CLK_UART0>;
+ resets = <&soc_clocks PXA910_CLK_UART0>;
status = "disabled";
};
@@ -78,6 +81,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4018000 0x1000>;
interrupts = <28>;
+ clocks = <&soc_clocks PXA910_CLK_UART1>;
+ resets = <&soc_clocks PXA910_CLK_UART1>;
status = "disabled";
};
@@ -85,6 +90,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4036000 0x1000>;
interrupts = <59>;
+ clocks = <&soc_clocks PXA910_CLK_UART2>;
+ resets = <&soc_clocks PXA910_CLK_UART2>;
status = "disabled";
};
@@ -97,6 +104,8 @@
#gpio-cells = <2>;
interrupts = <49>;
interrupt-names = "gpio_mux";
+ clocks = <&soc_clocks PXA910_CLK_GPIO>;
+ resets = <&soc_clocks PXA910_CLK_GPIO>;
interrupt-controller;
#interrupt-cells = <1>;
ranges;
@@ -124,6 +133,8 @@
#size-cells = <0>;
reg = <0xd4011000 0x1000>;
interrupts = <7>;
+ clocks = <&soc_clocks PXA910_CLK_TWSI0>;
+ resets = <&soc_clocks PXA910_CLK_TWSI0>;
mrvl,i2c-fast-mode;
status = "disabled";
};
@@ -134,6 +145,8 @@
#size-cells = <0>;
reg = <0xd4037000 0x1000>;
interrupts = <54>;
+ clocks = <&soc_clocks PXA910_CLK_TWSI1>;
+ resets = <&soc_clocks PXA910_CLK_TWSI1>;
status = "disabled";
};
@@ -142,8 +155,21 @@
reg = <0xd4010000 0x1000>;
interrupts = <5 6>;
interrupt-names = "rtc 1Hz", "rtc alarm";
+ clocks = <&soc_clocks PXA910_CLK_RTC>;
+ resets = <&soc_clocks PXA910_CLK_RTC>;
status = "disabled";
};
};
+
+ soc_clocks: clocks{
+ compatible = "marvell,pxa910-clock";
+ reg = <0xd4050000 0x1000>,
+ <0xd4282800 0x400>,
+ <0xd4015000 0x1000>,
+ <0xd403b000 0x1000>;
+ reg-names = "mpmu", "apmu", "apbc", "apbcp";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
};
};
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index ebdba87..fdbfadf 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -86,11 +86,12 @@ config MACH_GPLUGD
config MACH_MMP_DT
bool "Support MMP (ARMv5) platforms from device tree"
- select CPU_PXA168
- select CPU_PXA910
select USE_OF
select PINCTRL
select PINCTRL_SINGLE
+ select COMMON_CLK
+ select ARCH_HAS_RESET_CONTROLLER
+ select CPU_MOHAWK
help
Include support for Marvell MMP2 based platforms using
the device tree. Needn't select any other machine while
@@ -99,10 +100,12 @@ config MACH_MMP_DT
config MACH_MMP2_DT
bool "Support MMP2 (ARMv7) platforms from device tree"
depends on !CPU_MOHAWK
- select CPU_MMP2
select USE_OF
select PINCTRL
select PINCTRL_SINGLE
+ select COMMON_CLK
+ select ARCH_HAS_RESET_CONTROLLER
+ select CPU_PJ4
help
Include support for Marvell MMP2 based platforms using
the device tree.
@@ -111,21 +114,18 @@ endmenu
config CPU_PXA168
bool
- select COMMON_CLK
select CPU_MOHAWK
help
Select code specific to PXA168
config CPU_PXA910
bool
- select COMMON_CLK
select CPU_MOHAWK
help
Select code specific to PXA910
config CPU_MMP2
bool
- select COMMON_CLK
select CPU_PJ4
help
Select code specific to MMP2. MMP2 is ARMv7 compatible.
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
index cca529c..b2296c9 100644
--- a/arch/arm/mach-mmp/mmp-dt.c
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -11,63 +11,42 @@
#include <linux/irqchip.h>
#include <linux/of_platform.h>
+#include <linux/clk-provider.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <asm/hardware/cache-tauros2.h>
#include "common.h"
extern void __init mmp_dt_init_timer(void);
-static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
- OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
- {}
+static const char *pxa168_dt_board_compat[] __initdata = {
+ "mrvl,pxa168-aspenite",
+ NULL,
};
-static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL),
- OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
- {}
+static const char *pxa910_dt_board_compat[] __initdata = {
+ "mrvl,pxa910-dkb",
+ NULL,
};
-static void __init pxa168_dt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table,
- pxa168_auxdata_lookup, NULL);
-}
-
-static void __init pxa910_dt_init(void)
+static void __init mmp_init_time(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- pxa910_auxdata_lookup, NULL);
+#ifdef CONFIG_CACHE_TAUROS2
+ tauros2_init(0);
+#endif
+ mmp_dt_init_timer();
+ of_clk_init(NULL);
}
-static const char *mmp_dt_board_compat[] __initdata = {
- "mrvl,pxa168-aspenite",
- "mrvl,pxa910-dkb",
- NULL,
-};
-
DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
.map_io = mmp_map_io,
- .init_time = mmp_dt_init_timer,
- .init_machine = pxa168_dt_init,
- .dt_compat = mmp_dt_board_compat,
+ .init_time = mmp_init_time,
+ .dt_compat = pxa168_dt_board_compat,
MACHINE_END
DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)")
.map_io = mmp_map_io,
- .init_time = mmp_dt_init_timer,
- .init_machine = pxa910_dt_init,
- .dt_compat = mmp_dt_board_compat,
+ .init_time = mmp_init_time,
+ .dt_compat = pxa910_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
index 023cb45..998c0f5 100644
--- a/arch/arm/mach-mmp/mmp2-dt.c
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -12,29 +12,22 @@
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/of_platform.h>
+#include <linux/clk-provider.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <asm/hardware/cache-tauros2.h>
#include "common.h"
extern void __init mmp_dt_init_timer(void);
-static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.2", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
- OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp2-gpio", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
- {}
-};
-
-static void __init mmp2_dt_init(void)
+static void __init mmp_init_time(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- mmp2_auxdata_lookup, NULL);
+#ifdef CONFIG_CACHE_TAUROS2
+ tauros2_init(0);
+#endif
+ mmp_dt_init_timer();
+ of_clk_init(NULL);
}
static const char *mmp2_dt_board_compat[] __initdata = {
@@ -44,7 +37,6 @@ static const char *mmp2_dt_board_compat[] __initdata = {
DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
.map_io = mmp_map_io,
- .init_time = mmp_dt_init_timer,
- .init_machine = mmp2_dt_init,
+ .init_time = mmp_init_time,
.dt_compat = mmp2_dt_board_compat,
MACHINE_END
--
1.8.3.2
From: Chao Xie <[email protected]>
It adds the DT support for mmp2 clock subsystem.
Signed-off-by: Chao Xie <[email protected]>
---
.../devicetree/bindings/clock/marvell,mmp2.txt | 21 ++
drivers/clk/mmp/Makefile | 1 +
drivers/clk/mmp/clk-of-mmp2.c | 334 +++++++++++++++++++++
include/dt-bindings/clock/marvell,mmp2.h | 74 +++++
4 files changed, 430 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/marvell,mmp2.txt
create mode 100644 drivers/clk/mmp/clk-of-mmp2.c
create mode 100644 include/dt-bindings/clock/marvell,mmp2.h
diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt
new file mode 100644
index 0000000..af376a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt
@@ -0,0 +1,21 @@
+* Marvell MMP2 Clock Controller
+
+The MMP2 clock subsystem generates and supplies clock to various
+controllers within the MMP2 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "marvell,mmp2-clock" - controller compatible with MMP2 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+ region. There are 3 places in SOC has clock control logic:
+ "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell-mmp2.h>.
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 947cd74..3caaf7c 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -7,6 +7,7 @@ obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
obj-$(CONFIG_RESET_CONTROLLER) += reset.o
obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
+obj-$(CONFIG_MACH_MMP2_DT) += clk-of-mmp2.o
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
new file mode 100644
index 0000000..2cbc2b4
--- /dev/null
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -0,0 +1,334 @@
+/*
+ * mmp2 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/marvell,mmp2.h>
+
+#include "clk.h"
+#include "reset.h"
+
+#define APBC_RTC 0x0
+#define APBC_TWSI0 0x4
+#define APBC_TWSI1 0x8
+#define APBC_TWSI2 0xc
+#define APBC_TWSI3 0x10
+#define APBC_TWSI4 0x7c
+#define APBC_TWSI5 0x80
+#define APBC_KPC 0x18
+#define APBC_UART0 0x2c
+#define APBC_UART1 0x30
+#define APBC_UART2 0x34
+#define APBC_UART3 0x88
+#define APBC_GPIO 0x38
+#define APBC_PWM0 0x3c
+#define APBC_PWM1 0x40
+#define APBC_PWM2 0x44
+#define APBC_PWM3 0x48
+#define APBC_SSP0 0x50
+#define APBC_SSP1 0x54
+#define APBC_SSP2 0x58
+#define APBC_SSP3 0x5c
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_SDH2 0xe8
+#define APMU_SDH3 0xec
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_DISP1 0x110
+#define APMU_CCIC0 0x50
+#define APMU_CCIC1 0xf4
+#define MPMU_UART_PLL 0x14
+
+struct mmp2_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+};
+
+static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
+ {MMP2_CLK_CLK32, "clk32", NULL, CLK_IS_ROOT, 32768},
+ {MMP2_CLK_VCTCXO, "vctcxo", NULL, CLK_IS_ROOT, 26000000},
+ {MMP2_CLK_PLL1, "pll1", NULL, CLK_IS_ROOT, 800000000},
+ {MMP2_CLK_PLL2, "pll2", NULL, CLK_IS_ROOT, 960000000},
+ {MMP2_CLK_USB_PLL, "usb_pll", NULL, CLK_IS_ROOT, 480000000},
+};
+
+static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
+ {MMP2_CLK_PLL1_2, "pll1_2", "pll1", 1, 2, 0},
+ {MMP2_CLK_PLL1_4, "pll1_4", "pll1_2", 1, 2, 0},
+ {MMP2_CLK_PLL1_8, "pll1_8", "pll1_4", 1, 2, 0},
+ {MMP2_CLK_PLL1_16, "pll1_16", "pll1_8", 1, 2, 0},
+ {MMP2_CLK_PLL1_20, "pll1_20", "pll1_4", 1, 5, 0},
+ {MMP2_CLK_PLL1_3, "pll1_3", "pll1", 1, 3, 0},
+ {MMP2_CLK_PLL1_6, "pll1_6", "pll1_3", 1, 2, 0},
+ {MMP2_CLK_PLL1_12, "pll1_12", "pll1_6", 1, 2, 0},
+ {MMP2_CLK_PLL2_2, "pll2_2", "pll2", 1, 2, 0},
+ {MMP2_CLK_PLL2_4, "pll2_4", "pll2_2", 1, 2, 0},
+ {MMP2_CLK_PLL2_8, "pll2_8", "pll2_4", 1, 2, 0},
+ {MMP2_CLK_PLL2_16, "pll2_16", "pll2_8", 1, 2, 0},
+ {MMP2_CLK_PLL2_3, "pll2_3", "pll2", 1, 3, 0},
+ {MMP2_CLK_PLL2_6, "pll2_6", "pll2_3", 1, 2, 0},
+ {MMP2_CLK_PLL2_12, "pll2_12", "pll2_6", 1, 2, 0},
+ {MMP2_CLK_VCTCXO_2, "vctcxo_2", "vctcxo", 1, 2, 0},
+ {MMP2_CLK_VCTCXO_4, "vctcxo_4", "vctcxo_2", 1, 2, 0},
+};
+
+static struct mmp_clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 14634, .den = 2165}, /*14.745MHZ */
+ {.num = 3521, .den = 689}, /*19.23MHZ */
+ {.num = 9679, .den = 5728}, /*58.9824MHZ */
+ {.num = 15850, .den = 9451}, /*59.429MHZ */
+};
+
+static void mmp2_pll_init(struct mmp2_clk_unit *pxa_unit)
+{
+ struct clk *clk;
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
+ ARRAY_SIZE(fixed_rate_clks));
+
+ mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
+ ARRAY_SIZE(fixed_factor_clks));
+
+ clk = mmp_clk_register_factor("uart_pll", "pll1_4",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl), NULL);
+ mmp_clk_add(unit, MMP2_CLK_UART_PLL, clk);
+}
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+static DEFINE_SPINLOCK(uart2_lock);
+static const char *uart_parent_names[] = {"uart_pll", "vctcxo"};
+
+static DEFINE_SPINLOCK(ssp0_lock);
+static DEFINE_SPINLOCK(ssp1_lock);
+static DEFINE_SPINLOCK(ssp2_lock);
+static DEFINE_SPINLOCK(ssp3_lock);
+static const char *ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
+
+static DEFINE_SPINLOCK(reset_lock);
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+ {0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
+ {0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
+ {0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART2, 4, 3, 0, &uart2_lock},
+ {0, "uart3_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART3, 4, 3, 0, &uart2_lock},
+ {0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP0, 4, 3, 0, &ssp0_lock},
+ {0, "ssp1_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP1, 4, 3, 0, &ssp1_lock},
+ {0, "ssp2_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP2, 4, 3, 0, &ssp2_lock},
+ {0, "ssp3_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP3, 4, 3, 0, &ssp3_lock},
+};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+ {MMP2_CLK_TWSI0, "twsi0_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x7, 0x3, 0x0, 0, &reset_lock},
+ {MMP2_CLK_TWSI1, "twsi1_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI1, 0x7, 0x3, 0x0, 0, &reset_lock},
+ {MMP2_CLK_TWSI2, "twsi2_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI2, 0x7, 0x3, 0x0, 0, &reset_lock},
+ {MMP2_CLK_TWSI3, "twsi3_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI3, 0x7, 0x3, 0x0, 0, &reset_lock},
+ {MMP2_CLK_TWSI4, "twsi4_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI4, 0x7, 0x3, 0x0, 0, &reset_lock},
+ {MMP2_CLK_TWSI5, "twsi5_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_TWSI5, 0x7, 0x3, 0x0, 0, &reset_lock},
+ {MMP2_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x7, 0x3, 0x0, 0, &reset_lock},
+ {MMP2_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, &reset_lock},
+ {MMP2_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x87, 0x83, 0x0, MMP_CLK_GATE_NEED_DELAY, &reset_lock},
+ {MMP2_CLK_PWM0, "pwm0_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM0, 0x7, 0x3, 0x0, 0, &reset_lock},
+ {MMP2_CLK_PWM1, "pwm1_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM1, 0x7, 0x3, 0x0, 0, &reset_lock},
+ {MMP2_CLK_PWM2, "pwm2_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM2, 0x7, 0x3, 0x0, 0, &reset_lock},
+ {MMP2_CLK_PWM3, "pwm3_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM3, 0x7, 0x3, 0x0, 0, &reset_lock},
+ /* The gate clocks has mux parent. */
+ {MMP2_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x7, 0x3, 0x0, 0, &uart0_lock},
+ {MMP2_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x7, 0x3, 0x0, 0, &uart1_lock},
+ {MMP2_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBC_UART2, 0x7, 0x3, 0x0, 0, &uart2_lock},
+ {MMP2_CLK_UART3, "uart3_clk", "uart3_mux", CLK_SET_RATE_PARENT, APBC_UART3, 0x7, 0x3, 0x0, 0, &uart2_lock},
+ {MMP2_CLK_SSP0, "ssp0_clk", "ssp0_mux", CLK_SET_RATE_PARENT, APBC_SSP0, 0x7, 0x3, 0x0, 0, &ssp0_lock},
+ {MMP2_CLK_SSP1, "ssp1_clk", "ssp1_mux", CLK_SET_RATE_PARENT, APBC_SSP1, 0x7, 0x3, 0x0, 0, &ssp1_lock},
+ {MMP2_CLK_SSP2, "ssp2_clk", "ssp2_mux", CLK_SET_RATE_PARENT, APBC_SSP2, 0x7, 0x3, 0x0, 0, &ssp2_lock},
+ {MMP2_CLK_SSP3, "ssp3_clk", "ssp3_mux", CLK_SET_RATE_PARENT, APBC_SSP3, 0x7, 0x3, 0x0, 0, &ssp3_lock},
+};
+
+static void mmp2_apb_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_mux_clks));
+
+ mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_gate_clks));
+}
+
+static DEFINE_SPINLOCK(sdh_lock);
+static const char *sdh_parent_names[] = {"pll1_4", "pll2", "usb_pll", "pll1"};
+static struct mmp_clk_mix_config sdh_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(4, 10, 2, 8, 32),
+};
+
+static DEFINE_SPINLOCK(usb_lock);
+
+static DEFINE_SPINLOCK(disp0_lock);
+static DEFINE_SPINLOCK(disp1_lock);
+static const char *disp_parent_names[] = {"pll1", "pll1_16", "pll2", "vctcxo"};
+
+static DEFINE_SPINLOCK(ccic0_lock);
+static DEFINE_SPINLOCK(ccic1_lock);
+static const char *ccic_parent_names[] = {"pll1_2", "pll1_16", "vctcxo"};
+static struct mmp_clk_mix_config ccic0_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(4, 17, 2, 6, 32),
+};
+static struct mmp_clk_mix_config ccic1_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(4, 16, 2, 6, 32),
+};
+
+static struct mmp_param_mux_clk apmu_mux_clks[] = {
+ {MMP2_CLK_DISP0_MUX, "disp0_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP0, 6, 2, 0, &disp0_lock},
+ {MMP2_CLK_DISP1_MUX, "disp1_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP1, 6, 2, 0, &disp1_lock},
+};
+
+static struct mmp_param_div_clk apmu_div_clks[] = {
+ {0, "disp0_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 8, 4, 0, &disp0_lock},
+ {0, "disp0_sphy_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 15, 5, 0, &disp0_lock},
+ {0, "disp1_div", "disp1_mux", CLK_SET_RATE_PARENT, APMU_DISP1, 8, 4, 0, &disp1_lock},
+ {0, "ccic0_sphy_div", "ccic0_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC0, 10, 5, 0, &ccic0_lock},
+ {0, "ccic1_sphy_div", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 10, 5, 0, &ccic1_lock},
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+ {MMP2_CLK_USB, "usb_clk", "usb_pll", 0, APMU_USB, 0x9, 0x9, 0x0, 0, &usb_lock},
+ /* The gate clocks has mux parent. */
+ {MMP2_CLK_SDH0, "sdh0_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH0, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_SDH1, "sdh1_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_SDH1, "sdh2_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH2, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_SDH1, "sdh3_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH3, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+ {MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1b, 0x1b, 0x0, 0, &disp0_lock},
+ {MMP2_CLK_DISP0_SPHY, "disp0_sphy_clk", "disp0_sphy_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1024, 0x1024, 0x0, 0, &disp0_lock},
+ {MMP2_CLK_DISP1, "disp1_clk", "disp1_div", CLK_SET_RATE_PARENT, APMU_DISP1, 0x1b, 0x1b, 0x0, 0, &disp1_lock},
+ {MMP2_CLK_CCIC_ARBITER, "ccic_arbiter", "vctcxo", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1800, 0x1800, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC0, "ccic0_clk", "ccic0_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1b, 0x1b, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC0_PHY, "ccic0_phy_clk", "ccic0_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x24, 0x24, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC0_SPHY, "ccic0_sphy_clk", "ccic0_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x300, 0x300, 0x0, 0, &ccic0_lock},
+ {MMP2_CLK_CCIC1, "ccic1_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x1b, 0x1b, 0x0, 0, &ccic1_lock},
+ {MMP2_CLK_CCIC1_PHY, "ccic1_phy_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x24, 0x24, 0x0, 0, &ccic1_lock},
+ {MMP2_CLK_CCIC1_SPHY, "ccic1_sphy_clk", "ccic1_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x300, 0x300, 0x0, 0, &ccic1_lock},
+};
+
+static void mmp2_axi_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
+{
+ struct clk *clk;
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH0;
+ clk = mmp_clk_register_mix(NULL, "sdh_mix_clk", sdh_parent_names,
+ ARRAY_SIZE(sdh_parent_names),
+ CLK_SET_RATE_PARENT,
+ &sdh_mix_config, &sdh_lock);
+
+ ccic0_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_CCIC0;
+ clk = mmp_clk_register_mix(NULL, "ccic0_mix_clk", ccic_parent_names,
+ ARRAY_SIZE(ccic_parent_names),
+ CLK_SET_RATE_PARENT,
+ &ccic0_mix_config, &ccic0_lock);
+ mmp_clk_add(unit, MMP2_CLK_CCIC0_MIX, clk);
+
+ ccic1_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_CCIC1;
+ clk = mmp_clk_register_mix(NULL, "ccic1_mix_clk", ccic_parent_names,
+ ARRAY_SIZE(ccic_parent_names),
+ CLK_SET_RATE_PARENT,
+ &ccic1_mix_config, &ccic1_lock);
+ mmp_clk_add(unit, MMP2_CLK_CCIC1_MIX, clk);
+
+ mmp_register_mux_clks(unit, apmu_mux_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_mux_clks));
+
+ mmp_register_div_clks(unit, apmu_div_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_div_clks));
+
+ mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_gate_clks));
+}
+
+static void mmp2_clk_reset_init(struct device_node *np,
+ struct mmp2_clk_unit *pxa_unit)
+{
+ struct mmp_clk_reset_cell *cells;
+ int i, nr_resets;
+
+ nr_resets = ARRAY_SIZE(apbc_gate_clks);
+ cells = kcalloc(nr_resets, sizeof(*cells), GFP_KERNEL);
+ if (!cells)
+ return;
+
+ for (i = 0; i < nr_resets; i++) {
+ cells[i].clk_id = apbc_gate_clks[i].id;
+ cells[i].reg = pxa_unit->apbc_base + apbc_gate_clks[i].offset;
+ cells[i].flags = 0;
+ cells[i].lock = apbc_gate_clks[i].lock;
+ cells[i].bits = 0x4;
+ }
+
+ mmp_clk_reset_register(np, cells, nr_resets);
+}
+
+static void __init mmp2_clk_init(struct device_node *np)
+{
+ struct mmp2_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->mpmu_base = of_iomap(np, 0);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map mpmu registers\n");
+ return;
+ }
+
+ pxa_unit->apmu_base = of_iomap(np, 1);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map apmu registers\n");
+ return;
+ }
+
+ pxa_unit->apbc_base = of_iomap(np, 2);
+ if (!pxa_unit->apbc_base) {
+ pr_err("failed to map apbc registers\n");
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, MMP2_NR_CLKS);
+
+ mmp2_pll_init(pxa_unit);
+
+ mmp2_apb_periph_clk_init(pxa_unit);
+
+ mmp2_axi_periph_clk_init(pxa_unit);
+
+ mmp2_clk_reset_init(np, pxa_unit);
+}
+
+CLK_OF_DECLARE(mmp2_clk, "marvell,mmp2-clock", mmp2_clk_init);
diff --git a/include/dt-bindings/clock/marvell,mmp2.h b/include/dt-bindings/clock/marvell,mmp2.h
new file mode 100644
index 0000000..591f7fb
--- /dev/null
+++ b/include/dt-bindings/clock/marvell,mmp2.h
@@ -0,0 +1,74 @@
+#ifndef __DTS_MARVELL_MMP2_CLOCK_H
+#define __DTS_MARVELL_MMP2_CLOCK_H
+
+/* fixed clocks and plls */
+#define MMP2_CLK_CLK32 1
+#define MMP2_CLK_VCTCXO 2
+#define MMP2_CLK_PLL1 3
+#define MMP2_CLK_PLL1_2 8
+#define MMP2_CLK_PLL1_4 9
+#define MMP2_CLK_PLL1_8 10
+#define MMP2_CLK_PLL1_16 11
+#define MMP2_CLK_PLL1_3 12
+#define MMP2_CLK_PLL1_6 13
+#define MMP2_CLK_PLL1_12 14
+#define MMP2_CLK_PLL1_20 15
+#define MMP2_CLK_PLL2 16
+#define MMP2_CLK_PLL2_2 17
+#define MMP2_CLK_PLL2_4 18
+#define MMP2_CLK_PLL2_8 19
+#define MMP2_CLK_PLL2_16 20
+#define MMP2_CLK_PLL2_3 21
+#define MMP2_CLK_PLL2_6 22
+#define MMP2_CLK_PLL2_12 23
+#define MMP2_CLK_VCTCXO_2 24
+#define MMP2_CLK_VCTCXO_4 25
+#define MMP2_CLK_UART_PLL 26
+#define MMP2_CLK_USB_PLL 27
+
+/* apb periphrals */
+#define MMP2_CLK_TWSI0 60
+#define MMP2_CLK_TWSI1 61
+#define MMP2_CLK_TWSI2 62
+#define MMP2_CLK_TWSI3 63
+#define MMP2_CLK_TWSI4 64
+#define MMP2_CLK_TWSI5 65
+#define MMP2_CLK_GPIO 66
+#define MMP2_CLK_KPC 67
+#define MMP2_CLK_RTC 68
+#define MMP2_CLK_PWM0 69
+#define MMP2_CLK_PWM1 70
+#define MMP2_CLK_PWM2 71
+#define MMP2_CLK_PWM3 72
+#define MMP2_CLK_UART0 73
+#define MMP2_CLK_UART1 74
+#define MMP2_CLK_UART2 75
+#define MMP2_CLK_UART3 76
+#define MMP2_CLK_SSP0 77
+#define MMP2_CLK_SSP1 78
+#define MMP2_CLK_SSP2 79
+#define MMP2_CLK_SSP3 80
+
+/* axi periphrals */
+#define MMP2_CLK_SDH0 101
+#define MMP2_CLK_SDH1 102
+#define MMP2_CLK_SDH2 103
+#define MMP2_CLK_SDH3 104
+#define MMP2_CLK_USB 105
+#define MMP2_CLK_DISP0 106
+#define MMP2_CLK_DISP0_MUX 107
+#define MMP2_CLK_DISP0_SPHY 108
+#define MMP2_CLK_DISP1 109
+#define MMP2_CLK_DISP1_MUX 110
+#define MMP2_CLK_CCIC_ARBITER 111
+#define MMP2_CLK_CCIC0 112
+#define MMP2_CLK_CCIC0_MIX 113
+#define MMP2_CLK_CCIC0_PHY 114
+#define MMP2_CLK_CCIC0_SPHY 115
+#define MMP2_CLK_CCIC1 116
+#define MMP2_CLK_CCIC1_MIX 117
+#define MMP2_CLK_CCIC1_PHY 118
+#define MMP2_CLK_CCIC1_SPHY 119
+
+#define MMP2_NR_CLKS 200
+#endif
--
1.8.3.2
From: Chao Xie <[email protected]>
It adds the DT support for pxa168 clock subsystem.
Signed-off-by: Chao Xie <[email protected]>
---
.../devicetree/bindings/clock/marvell,pxa168.txt | 21 ++
drivers/clk/mmp/Makefile | 2 +
drivers/clk/mmp/clk-of-pxa168.c | 279 +++++++++++++++++++++
include/dt-bindings/clock/marvell,pxa168.h | 57 +++++
4 files changed, 359 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/marvell,pxa168.txt
create mode 100644 drivers/clk/mmp/clk-of-pxa168.c
create mode 100644 include/dt-bindings/clock/marvell,pxa168.h
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa168.txt b/Documentation/devicetree/bindings/clock/marvell,pxa168.txt
new file mode 100644
index 0000000..c62eb1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa168.txt
@@ -0,0 +1,21 @@
+* Marvell PXA168 Clock Controller
+
+The PXA168 clock subsystem generates and supplies clock to various
+controllers within the PXA168 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "marvell,pxa168-clock" - controller compatible with PXA168 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+ region. There are 3 places in SOC has clock control logic:
+ "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell,pxa168.h>.
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 2573d7c..733acc7 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -6,6 +6,8 @@ obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
obj-$(CONFIG_RESET_CONTROLLER) += reset.o
+obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o
+
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o
diff --git a/drivers/clk/mmp/clk-of-pxa168.c b/drivers/clk/mmp/clk-of-pxa168.c
new file mode 100644
index 0000000..5b1810d
--- /dev/null
+++ b/drivers/clk/mmp/clk-of-pxa168.c
@@ -0,0 +1,279 @@
+/*
+ * pxa168 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/marvell,pxa168.h>
+
+#include "clk.h"
+#include "reset.h"
+
+#define APBC_RTC 0x28
+#define APBC_TWSI0 0x2c
+#define APBC_KPC 0x30
+#define APBC_UART0 0x0
+#define APBC_UART1 0x4
+#define APBC_GPIO 0x8
+#define APBC_PWM0 0xc
+#define APBC_PWM1 0x10
+#define APBC_PWM2 0x14
+#define APBC_PWM3 0x18
+#define APBC_SSP0 0x81c
+#define APBC_SSP1 0x820
+#define APBC_SSP2 0x84c
+#define APBC_SSP3 0x858
+#define APBC_SSP4 0x85c
+#define APBC_TWSI1 0x6c
+#define APBC_UART2 0x70
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_CCIC0 0x50
+#define APMU_DFC 0x60
+#define MPMU_UART_PLL 0x14
+
+struct pxa168_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+};
+
+static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
+ {PXA168_CLK_CLK32, "clk32", NULL, CLK_IS_ROOT, 32768},
+ {PXA168_CLK_VCTCXO, "vctcxo", NULL, CLK_IS_ROOT, 26000000},
+ {PXA168_CLK_PLL1, "pll1", NULL, CLK_IS_ROOT, 624000000},
+};
+
+static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
+ {PXA168_CLK_PLL1_2, "pll1_2", "pll1", 1, 2, 0},
+ {PXA168_CLK_PLL1_4, "pll1_4", "pll1_2", 1, 2, 0},
+ {PXA168_CLK_PLL1_8, "pll1_8", "pll1_4", 1, 2, 0},
+ {PXA168_CLK_PLL1_16, "pll1_16", "pll1_8", 1, 2, 0},
+ {PXA168_CLK_PLL1_6, "pll1_6", "pll1_2", 1, 3, 0},
+ {PXA168_CLK_PLL1_12, "pll1_12", "pll1_6", 1, 2, 0},
+ {PXA168_CLK_PLL1_24, "pll1_24", "pll1_12", 1, 2, 0},
+ {PXA168_CLK_PLL1_48, "pll1_48", "pll1_24", 1, 2, 0},
+ {PXA168_CLK_PLL1_96, "pll1_96", "pll1_48", 1, 2, 0},
+ {PXA168_CLK_PLL1_13, "pll1_13", "pll1", 1, 13, 0},
+ {PXA168_CLK_PLL1_13_1_5, "pll1_13_1_5", "pll1_13", 2, 3, 0},
+ {PXA168_CLK_PLL1_2_1_5, "pll1_2_1_5", "pll1_2", 2, 3, 0},
+ {PXA168_CLK_PLL1_3_16, "pll1_3_16", "pll1", 3, 16, 0},
+};
+
+static struct mmp_clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 8125, .den = 1536}, /*14.745MHZ */
+};
+
+static void pxa168_pll_init(struct pxa168_clk_unit *pxa_unit)
+{
+ struct clk *clk;
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
+ ARRAY_SIZE(fixed_rate_clks));
+
+ mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
+ ARRAY_SIZE(fixed_factor_clks));
+
+ clk = mmp_clk_register_factor("uart_pll", "pll1_4",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl), NULL);
+ mmp_clk_add(unit, PXA168_CLK_UART_PLL, clk);
+}
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+static DEFINE_SPINLOCK(uart2_lock);
+static const char *uart_parent_names[] = {"pll1_3_16", "uart_pll"};
+
+static DEFINE_SPINLOCK(ssp0_lock);
+static DEFINE_SPINLOCK(ssp1_lock);
+static DEFINE_SPINLOCK(ssp2_lock);
+static DEFINE_SPINLOCK(ssp3_lock);
+static DEFINE_SPINLOCK(ssp4_lock);
+static const char *ssp_parent_names[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"};
+
+static DEFINE_SPINLOCK(reset_lock);
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+ {0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
+ {0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
+ {0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART2, 4, 3, 0, &uart2_lock},
+ {0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP0, 4, 3, 0, &ssp0_lock},
+ {0, "ssp1_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP1, 4, 3, 0, &ssp1_lock},
+ {0, "ssp2_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP2, 4, 3, 0, &ssp2_lock},
+ {0, "ssp3_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP3, 4, 3, 0, &ssp3_lock},
+ {0, "ssp4_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP4, 4, 3, 0, &ssp4_lock},
+};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+ {PXA168_CLK_TWSI0, "twsi0_clk", "pll1_13_1_5", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA168_CLK_TWSI1, "twsi1_clk", "pll1_13_1_5", CLK_SET_RATE_PARENT, APBC_TWSI1, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA168_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA168_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x3, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {PXA168_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x83, 0x83, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {PXA168_CLK_PWM0, "pwm0_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM0, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA168_CLK_PWM1, "pwm1_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM1, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA168_CLK_PWM2, "pwm2_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM2, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA168_CLK_PWM3, "pwm3_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM3, 0x3, 0x3, 0x0, 0, &reset_lock},
+ /* The gate clocks has mux parent. */
+ {PXA168_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x3, 0x3, 0x0, 0, &uart0_lock},
+ {PXA168_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x3, 0x3, 0x0, 0, &uart1_lock},
+ {PXA168_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBC_UART2, 0x3, 0x3, 0x0, 0, &uart2_lock},
+ {PXA168_CLK_SSP0, "ssp0_clk", "ssp0_mux", CLK_SET_RATE_PARENT, APBC_SSP0, 0x3, 0x3, 0x0, 0, &ssp0_lock},
+ {PXA168_CLK_SSP1, "ssp1_clk", "ssp1_mux", CLK_SET_RATE_PARENT, APBC_SSP1, 0x3, 0x3, 0x0, 0, &ssp1_lock},
+ {PXA168_CLK_SSP2, "ssp2_clk", "ssp2_mux", CLK_SET_RATE_PARENT, APBC_SSP2, 0x3, 0x3, 0x0, 0, &ssp2_lock},
+ {PXA168_CLK_SSP3, "ssp3_clk", "ssp3_mux", CLK_SET_RATE_PARENT, APBC_SSP3, 0x3, 0x3, 0x0, 0, &ssp3_lock},
+ {PXA168_CLK_SSP4, "ssp4_clk", "ssp4_mux", CLK_SET_RATE_PARENT, APBC_SSP4, 0x3, 0x3, 0x0, 0, &ssp4_lock},
+};
+
+static void pxa168_apb_periph_clk_init(struct pxa168_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_mux_clks));
+
+ mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_gate_clks));
+
+}
+
+static DEFINE_SPINLOCK(sdh0_lock);
+static DEFINE_SPINLOCK(sdh1_lock);
+static const char *sdh_parent_names[] = {"pll1_12", "pll1_13"};
+
+static DEFINE_SPINLOCK(usb_lock);
+
+static DEFINE_SPINLOCK(disp0_lock);
+static const char *disp_parent_names[] = {"pll1_2", "pll1_12"};
+
+static DEFINE_SPINLOCK(ccic0_lock);
+static const char *ccic_parent_names[] = {"pll1_2", "pll1_12"};
+static const char *ccic_phy_parent_names[] = {"pll1_6", "pll1_12"};
+
+static struct mmp_param_mux_clk apmu_mux_clks[] = {
+ {0, "sdh0_mux", sdh_parent_names, ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT, APMU_SDH0, 6, 1, 0, &sdh0_lock},
+ {0, "sdh1_mux", sdh_parent_names, ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT, APMU_SDH1, 6, 1, 0, &sdh1_lock},
+ {0, "disp0_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP0, 6, 1, 0, &disp0_lock},
+ {0, "ccic0_mux", ccic_parent_names, ARRAY_SIZE(ccic_parent_names), CLK_SET_RATE_PARENT, APMU_CCIC0, 6, 1, 0, &ccic0_lock},
+ {0, "ccic0_phy_mux", ccic_phy_parent_names, ARRAY_SIZE(ccic_phy_parent_names), CLK_SET_RATE_PARENT, APMU_CCIC0, 7, 1, 0, &ccic0_lock},
+};
+
+static struct mmp_param_div_clk apmu_div_clks[] = {
+ {0, "ccic0_sphy_div", "ccic0_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 10, 5, 0, &ccic0_lock},
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+ {PXA168_CLK_DFC, "dfc_clk", "pll1_4", CLK_SET_RATE_PARENT, APMU_DFC, 0x19b, 0x19b, 0x0, 0, NULL},
+ {PXA168_CLK_USB, "usb_clk", "usb_pll", 0, APMU_USB, 0x9, 0x9, 0x0, 0, &usb_lock},
+ {PXA168_CLK_SPH, "sph_clk", "usb_pll", 0, APMU_USB, 0x12, 0x12, 0x0, 0, &usb_lock},
+ /* The gate clocks has mux parent. */
+ {PXA168_CLK_SDH0, "sdh0_clk", "sdh0_mux", CLK_SET_RATE_PARENT, APMU_SDH0, 0x1b, 0x1b, 0x0, 0, &sdh0_lock},
+ {PXA168_CLK_SDH1, "sdh1_clk", "sdh1_mux", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh1_lock},
+ {PXA168_CLK_DISP0, "disp0_clk", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1b, 0x1b, 0x0, 0, &disp0_lock},
+ {PXA168_CLK_CCIC0, "ccic0_clk", "ccic0_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1b, 0x1b, 0x0, 0, &ccic0_lock},
+ {PXA168_CLK_CCIC0_PHY, "ccic0_phy_clk", "ccic0_phy_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x24, 0x24, 0x0, 0, &ccic0_lock},
+ {PXA168_CLK_CCIC0_SPHY, "ccic0_sphy_clk", "ccic0_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x300, 0x300, 0x0, 0, &ccic0_lock},
+};
+
+static void pxa168_axi_periph_clk_init(struct pxa168_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apmu_mux_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_mux_clks));
+
+ mmp_register_div_clks(unit, apmu_div_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_div_clks));
+
+ mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_gate_clks));
+}
+
+static void pxa168_clk_reset_init(struct device_node *np,
+ struct pxa168_clk_unit *pxa_unit)
+{
+ struct mmp_clk_reset_cell *cells;
+ int i, nr_resets;
+
+ nr_resets = ARRAY_SIZE(apbc_gate_clks);
+ cells = kcalloc(nr_resets, sizeof(*cells), GFP_KERNEL);
+ if (!cells)
+ return;
+
+ for (i = 0; i < nr_resets; i++) {
+ cells[i].clk_id = apbc_gate_clks[i].id;
+ cells[i].reg = pxa_unit->apbc_base + apbc_gate_clks[i].offset;
+ cells[i].flags = 0;
+ cells[i].lock = apbc_gate_clks[i].lock;
+ cells[i].bits = 0x4;
+ }
+
+ mmp_clk_reset_register(np, cells, nr_resets);
+}
+
+static void __init pxa168_clk_init(struct device_node *np)
+{
+ struct pxa168_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->mpmu_base = of_iomap(np, 0);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map mpmu registers\n");
+ return;
+ }
+
+ pxa_unit->apmu_base = of_iomap(np, 1);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map apmu registers\n");
+ return;
+ }
+
+ pxa_unit->apbc_base = of_iomap(np, 2);
+ if (!pxa_unit->apbc_base) {
+ pr_err("failed to map apbc registers\n");
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, PXA168_NR_CLKS);
+
+ pxa168_pll_init(pxa_unit);
+
+ pxa168_apb_periph_clk_init(pxa_unit);
+
+ pxa168_axi_periph_clk_init(pxa_unit);
+
+ pxa168_clk_reset_init(np, pxa_unit);
+}
+
+CLK_OF_DECLARE(pxa168_clk, "marvell,pxa168-clock", pxa168_clk_init);
diff --git a/include/dt-bindings/clock/marvell,pxa168.h b/include/dt-bindings/clock/marvell,pxa168.h
new file mode 100644
index 0000000..79630b9
--- /dev/null
+++ b/include/dt-bindings/clock/marvell,pxa168.h
@@ -0,0 +1,57 @@
+#ifndef __DTS_MARVELL_PXA168_CLOCK_H
+#define __DTS_MARVELL_PXA168_CLOCK_H
+
+/* fixed clocks and plls */
+#define PXA168_CLK_CLK32 1
+#define PXA168_CLK_VCTCXO 2
+#define PXA168_CLK_PLL1 3
+#define PXA168_CLK_PLL1_2 8
+#define PXA168_CLK_PLL1_4 9
+#define PXA168_CLK_PLL1_8 10
+#define PXA168_CLK_PLL1_16 11
+#define PXA168_CLK_PLL1_6 12
+#define PXA168_CLK_PLL1_12 13
+#define PXA168_CLK_PLL1_24 14
+#define PXA168_CLK_PLL1_48 15
+#define PXA168_CLK_PLL1_96 16
+#define PXA168_CLK_PLL1_13 17
+#define PXA168_CLK_PLL1_13_1_5 18
+#define PXA168_CLK_PLL1_2_1_5 19
+#define PXA168_CLK_PLL1_3_16 20
+#define PXA168_CLK_UART_PLL 27
+
+/* apb periphrals */
+#define PXA168_CLK_TWSI0 60
+#define PXA168_CLK_TWSI1 61
+#define PXA168_CLK_TWSI2 62
+#define PXA168_CLK_TWSI3 63
+#define PXA168_CLK_GPIO 64
+#define PXA168_CLK_KPC 65
+#define PXA168_CLK_RTC 66
+#define PXA168_CLK_PWM0 67
+#define PXA168_CLK_PWM1 68
+#define PXA168_CLK_PWM2 69
+#define PXA168_CLK_PWM3 70
+#define PXA168_CLK_UART0 71
+#define PXA168_CLK_UART1 72
+#define PXA168_CLK_UART2 73
+#define PXA168_CLK_SSP0 74
+#define PXA168_CLK_SSP1 75
+#define PXA168_CLK_SSP2 76
+#define PXA168_CLK_SSP3 77
+#define PXA168_CLK_SSP4 78
+
+/* axi periphrals */
+#define PXA168_CLK_DFC 100
+#define PXA168_CLK_SDH0 101
+#define PXA168_CLK_SDH1 102
+#define PXA168_CLK_SDH2 103
+#define PXA168_CLK_USB 104
+#define PXA168_CLK_SPH 105
+#define PXA168_CLK_DISP0 106
+#define PXA168_CLK_CCIC0 107
+#define PXA168_CLK_CCIC0_PHY 108
+#define PXA168_CLK_CCIC0_SPHY 109
+
+#define PXA168_NR_CLKS 200
+#endif
--
1.8.3.2
From: Chao Xie <[email protected]>
It adds the DT support for pxa910 clock subsystem.
Signed-off-by: Chao Xie <[email protected]>
---
.../devicetree/bindings/clock/marvell,pxa910.txt | 21 ++
drivers/clk/mmp/Makefile | 2 +-
drivers/clk/mmp/clk-of-pxa910.c | 301 +++++++++++++++++++++
include/dt-bindings/clock/marvell,pxa910.h | 54 ++++
4 files changed, 377 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/clock/marvell,pxa910.txt
create mode 100644 drivers/clk/mmp/clk-of-pxa910.c
create mode 100644 include/dt-bindings/clock/marvell,pxa910.h
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa910.txt b/Documentation/devicetree/bindings/clock/marvell,pxa910.txt
new file mode 100644
index 0000000..d9f41f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa910.txt
@@ -0,0 +1,21 @@
+* Marvell PXA910 Clock Controller
+
+The PXA910 clock subsystem generates and supplies clock to various
+controllers within the PXA910 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "marvell,pxa910-clock" - controller compatible with PXA910 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+ region. There are 4 places in SOC has clock control logic:
+ "mpmu", "apmu", "apbc", "apbcp". So four reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell-pxa910.h>.
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 733acc7..947cd74 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -6,7 +6,7 @@ obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
obj-$(CONFIG_RESET_CONTROLLER) += reset.o
-obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o
+obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
diff --git a/drivers/clk/mmp/clk-of-pxa910.c b/drivers/clk/mmp/clk-of-pxa910.c
new file mode 100644
index 0000000..5e3c80d
--- /dev/null
+++ b/drivers/clk/mmp/clk-of-pxa910.c
@@ -0,0 +1,301 @@
+/*
+ * pxa910 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/marvell,pxa910.h>
+
+#include "clk.h"
+#include "reset.h"
+
+#define APBC_RTC 0x28
+#define APBC_TWSI0 0x2c
+#define APBC_KPC 0x18
+#define APBC_UART0 0x0
+#define APBC_UART1 0x4
+#define APBC_GPIO 0x8
+#define APBC_PWM0 0xc
+#define APBC_PWM1 0x10
+#define APBC_PWM2 0x14
+#define APBC_PWM3 0x18
+#define APBC_SSP0 0x1c
+#define APBC_SSP1 0x20
+#define APBC_SSP2 0x4c
+#define APBCP_TWSI1 0x28
+#define APBCP_UART2 0x1c
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_CCIC0 0x50
+#define APMU_DFC 0x60
+#define MPMU_UART_PLL 0x14
+
+struct pxa910_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+ void __iomem *apbcp_base;
+};
+
+static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
+ {PXA910_CLK_CLK32, "clk32", NULL, CLK_IS_ROOT, 32768},
+ {PXA910_CLK_VCTCXO, "vctcxo", NULL, CLK_IS_ROOT, 26000000},
+ {PXA910_CLK_PLL1, "pll1", NULL, CLK_IS_ROOT, 624000000},
+};
+
+static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
+ {PXA910_CLK_PLL1_2, "pll1_2", "pll1", 1, 2, 0},
+ {PXA910_CLK_PLL1_4, "pll1_4", "pll1_2", 1, 2, 0},
+ {PXA910_CLK_PLL1_8, "pll1_8", "pll1_4", 1, 2, 0},
+ {PXA910_CLK_PLL1_16, "pll1_16", "pll1_8", 1, 2, 0},
+ {PXA910_CLK_PLL1_6, "pll1_6", "pll1_2", 1, 3, 0},
+ {PXA910_CLK_PLL1_12, "pll1_12", "pll1_6", 1, 2, 0},
+ {PXA910_CLK_PLL1_24, "pll1_24", "pll1_12", 1, 2, 0},
+ {PXA910_CLK_PLL1_48, "pll1_48", "pll1_24", 1, 2, 0},
+ {PXA910_CLK_PLL1_96, "pll1_96", "pll1_48", 1, 2, 0},
+ {PXA910_CLK_PLL1_13, "pll1_13", "pll1", 1, 13, 0},
+ {PXA910_CLK_PLL1_13_1_5, "pll1_13_1_5", "pll1_13", 2, 3, 0},
+ {PXA910_CLK_PLL1_2_1_5, "pll1_2_1_5", "pll1_2", 2, 3, 0},
+ {PXA910_CLK_PLL1_3_16, "pll1_3_16", "pll1", 3, 16, 0},
+};
+
+static struct mmp_clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 8125, .den = 1536}, /*14.745MHZ */
+};
+
+static void pxa910_pll_init(struct pxa910_clk_unit *pxa_unit)
+{
+ struct clk *clk;
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
+ ARRAY_SIZE(fixed_rate_clks));
+
+ mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
+ ARRAY_SIZE(fixed_factor_clks));
+
+ clk = mmp_clk_register_factor("uart_pll", "pll1_4",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl), NULL);
+ mmp_clk_add(unit, PXA910_CLK_UART_PLL, clk);
+}
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+static DEFINE_SPINLOCK(uart2_lock);
+static const char *uart_parent_names[] = {"pll1_3_16", "uart_pll"};
+
+static DEFINE_SPINLOCK(ssp0_lock);
+static DEFINE_SPINLOCK(ssp1_lock);
+static const char *ssp_parent_names[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"};
+
+static DEFINE_SPINLOCK(reset_lock);
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+ {0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
+ {0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
+ {0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP0, 4, 3, 0, &ssp0_lock},
+ {0, "ssp1_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP1, 4, 3, 0, &ssp1_lock},
+};
+
+static struct mmp_param_mux_clk apbcp_mux_clks[] = {
+ {0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBCP_UART2, 4, 3, 0, &uart2_lock},
+};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+ {PXA910_CLK_TWSI0, "twsi0_clk", "pll1_13_1_5", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA910_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA910_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x3, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {PXA910_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x83, 0x83, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {PXA910_CLK_PWM0, "pwm0_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM0, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA910_CLK_PWM1, "pwm1_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM1, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA910_CLK_PWM2, "pwm2_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM2, 0x3, 0x3, 0x0, 0, &reset_lock},
+ {PXA910_CLK_PWM3, "pwm3_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM3, 0x3, 0x3, 0x0, 0, &reset_lock},
+ /* The gate clocks has mux parent. */
+ {PXA910_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x3, 0x3, 0x0, 0, &uart0_lock},
+ {PXA910_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x3, 0x3, 0x0, 0, &uart1_lock},
+ {PXA910_CLK_SSP0, "ssp0_clk", "ssp0_mux", CLK_SET_RATE_PARENT, APBC_SSP0, 0x3, 0x3, 0x0, 0, &ssp0_lock},
+ {PXA910_CLK_SSP1, "ssp1_clk", "ssp1_mux", CLK_SET_RATE_PARENT, APBC_SSP1, 0x3, 0x3, 0x0, 0, &ssp1_lock},
+};
+
+static struct mmp_param_gate_clk apbcp_gate_clks[] = {
+ {PXA910_CLK_TWSI1, "twsi1_clk", "pll1_13_1_5", CLK_SET_RATE_PARENT, APBCP_TWSI1, 0x3, 0x3, 0x0, 0, &reset_lock},
+ /* The gate clocks has mux parent. */
+ {PXA910_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBCP_UART2, 0x3, 0x3, 0x0, 0, &uart2_lock},
+};
+
+static void pxa910_apb_periph_clk_init(struct pxa910_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_mux_clks));
+
+ mmp_register_mux_clks(unit, apbcp_mux_clks, pxa_unit->apbcp_base,
+ ARRAY_SIZE(apbcp_mux_clks));
+
+ mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_gate_clks));
+
+ mmp_register_gate_clks(unit, apbcp_gate_clks, pxa_unit->apbcp_base,
+ ARRAY_SIZE(apbcp_gate_clks));
+}
+
+static DEFINE_SPINLOCK(sdh0_lock);
+static DEFINE_SPINLOCK(sdh1_lock);
+static const char *sdh_parent_names[] = {"pll1_12", "pll1_13"};
+
+static DEFINE_SPINLOCK(usb_lock);
+
+static DEFINE_SPINLOCK(disp0_lock);
+static const char *disp_parent_names[] = {"pll1_2", "pll1_12"};
+
+static DEFINE_SPINLOCK(ccic0_lock);
+static const char *ccic_parent_names[] = {"pll1_2", "pll1_12"};
+static const char *ccic_phy_parent_names[] = {"pll1_6", "pll1_12"};
+
+static struct mmp_param_mux_clk apmu_mux_clks[] = {
+ {0, "sdh0_mux", sdh_parent_names, ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT, APMU_SDH0, 6, 1, 0, &sdh0_lock},
+ {0, "sdh1_mux", sdh_parent_names, ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT, APMU_SDH1, 6, 1, 0, &sdh1_lock},
+ {0, "disp0_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP0, 6, 1, 0, &disp0_lock},
+ {0, "ccic0_mux", ccic_parent_names, ARRAY_SIZE(ccic_parent_names), CLK_SET_RATE_PARENT, APMU_CCIC0, 6, 1, 0, &ccic0_lock},
+ {0, "ccic0_phy_mux", ccic_phy_parent_names, ARRAY_SIZE(ccic_phy_parent_names), CLK_SET_RATE_PARENT, APMU_CCIC0, 7, 1, 0, &ccic0_lock},
+};
+
+static struct mmp_param_div_clk apmu_div_clks[] = {
+ {0, "ccic0_sphy_div", "ccic0_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 10, 5, 0, &ccic0_lock},
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+ {PXA910_CLK_DFC, "dfc_clk", "pll1_4", CLK_SET_RATE_PARENT, APMU_DFC, 0x19b, 0x19b, 0x0, 0, NULL},
+ {PXA910_CLK_USB, "usb_clk", "usb_pll", 0, APMU_USB, 0x9, 0x9, 0x0, 0, &usb_lock},
+ {PXA910_CLK_SPH, "sph_clk", "usb_pll", 0, APMU_USB, 0x12, 0x12, 0x0, 0, &usb_lock},
+ /* The gate clocks has mux parent. */
+ {PXA910_CLK_SDH0, "sdh0_clk", "sdh0_mux", CLK_SET_RATE_PARENT, APMU_SDH0, 0x1b, 0x1b, 0x0, 0, &sdh0_lock},
+ {PXA910_CLK_SDH1, "sdh1_clk", "sdh1_mux", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh1_lock},
+ {PXA910_CLK_DISP0, "disp0_clk", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1b, 0x1b, 0x0, 0, &disp0_lock},
+ {PXA910_CLK_CCIC0, "ccic0_clk", "ccic0_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1b, 0x1b, 0x0, 0, &ccic0_lock},
+ {PXA910_CLK_CCIC0_PHY, "ccic0_phy_clk", "ccic0_phy_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x24, 0x24, 0x0, 0, &ccic0_lock},
+ {PXA910_CLK_CCIC0_SPHY, "ccic0_sphy_clk", "ccic0_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x300, 0x300, 0x0, 0, &ccic0_lock},
+};
+
+static void pxa910_axi_periph_clk_init(struct pxa910_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apmu_mux_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_mux_clks));
+
+ mmp_register_div_clks(unit, apmu_div_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_div_clks));
+
+ mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_gate_clks));
+}
+
+static void pxa910_clk_reset_init(struct device_node *np,
+ struct pxa910_clk_unit *pxa_unit)
+{
+ struct mmp_clk_reset_cell *cells;
+ int i, base, nr_resets_apbc, nr_resets_apbcp, nr_resets;
+
+ nr_resets_apbc = ARRAY_SIZE(apbc_gate_clks);
+ nr_resets_apbcp = ARRAY_SIZE(apbcp_gate_clks);
+ nr_resets = nr_resets_apbc + nr_resets_apbcp;
+ cells = kcalloc(nr_resets, sizeof(*cells), GFP_KERNEL);
+ if (!cells)
+ return;
+
+ base = 0;
+ for (i = 0; i < nr_resets_apbc; i++) {
+ cells[base + i].clk_id = apbc_gate_clks[i].id;
+ cells[base + i].reg =
+ pxa_unit->apbc_base + apbc_gate_clks[i].offset;
+ cells[base + i].flags = 0;
+ cells[base + i].lock = apbc_gate_clks[i].lock;
+ cells[base + i].bits = 0x4;
+ }
+
+ base = nr_resets_apbc;
+ for (i = 0; i < nr_resets_apbcp; i++) {
+ cells[base + i].clk_id = apbcp_gate_clks[i].id;
+ cells[base + i].reg =
+ pxa_unit->apbc_base + apbc_gate_clks[i].offset;
+ cells[base + i].flags = 0;
+ cells[base + i].lock = apbc_gate_clks[i].lock;
+ cells[base + i].bits = 0x4;
+ }
+
+ mmp_clk_reset_register(np, cells, nr_resets);
+}
+
+static void __init pxa910_clk_init(struct device_node *np)
+{
+ struct pxa910_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->mpmu_base = of_iomap(np, 0);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map mpmu registers\n");
+ return;
+ }
+
+ pxa_unit->apmu_base = of_iomap(np, 1);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map apmu registers\n");
+ return;
+ }
+
+ pxa_unit->apbc_base = of_iomap(np, 2);
+ if (!pxa_unit->apbc_base) {
+ pr_err("failed to map apbc registers\n");
+ return;
+ }
+
+ pxa_unit->apbcp_base = of_iomap(np, 3);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map apbcp registers\n");
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, PXA910_NR_CLKS);
+
+ pxa910_pll_init(pxa_unit);
+
+ pxa910_apb_periph_clk_init(pxa_unit);
+
+ pxa910_axi_periph_clk_init(pxa_unit);
+
+ pxa910_clk_reset_init(np, pxa_unit);
+}
+
+CLK_OF_DECLARE(pxa910_clk, "marvell,pxa910-clock", pxa910_clk_init);
diff --git a/include/dt-bindings/clock/marvell,pxa910.h b/include/dt-bindings/clock/marvell,pxa910.h
new file mode 100644
index 0000000..719cffb
--- /dev/null
+++ b/include/dt-bindings/clock/marvell,pxa910.h
@@ -0,0 +1,54 @@
+#ifndef __DTS_MARVELL_PXA910_CLOCK_H
+#define __DTS_MARVELL_PXA910_CLOCK_H
+
+/* fixed clocks and plls */
+#define PXA910_CLK_CLK32 1
+#define PXA910_CLK_VCTCXO 2
+#define PXA910_CLK_PLL1 3
+#define PXA910_CLK_PLL1_2 8
+#define PXA910_CLK_PLL1_4 9
+#define PXA910_CLK_PLL1_8 10
+#define PXA910_CLK_PLL1_16 11
+#define PXA910_CLK_PLL1_6 12
+#define PXA910_CLK_PLL1_12 13
+#define PXA910_CLK_PLL1_24 14
+#define PXA910_CLK_PLL1_48 15
+#define PXA910_CLK_PLL1_96 16
+#define PXA910_CLK_PLL1_13 17
+#define PXA910_CLK_PLL1_13_1_5 18
+#define PXA910_CLK_PLL1_2_1_5 19
+#define PXA910_CLK_PLL1_3_16 20
+#define PXA910_CLK_UART_PLL 27
+
+/* apb periphrals */
+#define PXA910_CLK_TWSI0 60
+#define PXA910_CLK_TWSI1 61
+#define PXA910_CLK_TWSI2 62
+#define PXA910_CLK_TWSI3 63
+#define PXA910_CLK_GPIO 64
+#define PXA910_CLK_KPC 65
+#define PXA910_CLK_RTC 66
+#define PXA910_CLK_PWM0 67
+#define PXA910_CLK_PWM1 68
+#define PXA910_CLK_PWM2 69
+#define PXA910_CLK_PWM3 70
+#define PXA910_CLK_UART0 71
+#define PXA910_CLK_UART1 72
+#define PXA910_CLK_UART2 73
+#define PXA910_CLK_SSP0 74
+#define PXA910_CLK_SSP1 75
+
+/* axi periphrals */
+#define PXA910_CLK_DFC 100
+#define PXA910_CLK_SDH0 101
+#define PXA910_CLK_SDH1 102
+#define PXA910_CLK_SDH2 103
+#define PXA910_CLK_USB 104
+#define PXA910_CLK_SPH 105
+#define PXA910_CLK_DISP0 106
+#define PXA910_CLK_CCIC0 107
+#define PXA910_CLK_CCIC0_PHY 108
+#define PXA910_CLK_CCIC0_SPHY 109
+
+#define PXA910_NR_CLKS 200
+#endif
--
1.8.3.2
From: Chao Xie <[email protected]>
Add items in arch/arm/boot/dt/Makefile to compile the dtb
for mach-mmp.
Change the dts and dtsi file to use #include instead of \include\
Signed-off-by: Chao Xie <[email protected]>
---
arch/arm/boot/dts/Makefile | 3 +++
arch/arm/boot/dts/mmp2-brownstone.dts | 2 +-
arch/arm/boot/dts/mmp2.dtsi | 2 +-
arch/arm/boot/dts/pxa168-aspenite.dts | 2 +-
arch/arm/boot/dts/pxa168.dtsi | 2 +-
arch/arm/boot/dts/pxa910-dkb.dts | 2 +-
arch/arm/boot/dts/pxa910.dtsi | 2 +-
7 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b8c5cd3..f8f7613 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -159,6 +159,9 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
kirkwood-ts419-6282.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
+dtb-$(CONFIG_ARCH_MMP) += pxa168-aspenite.dtb \
+ pxa910-dkb.dtb \
+ mmp2-brownstone.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
dtb-$(CONFIG_ARCH_MXC) += \
imx25-eukrea-mbimxsd25-baseboard.dtb \
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts
index 7f70a39..350208c 100644
--- a/arch/arm/boot/dts/mmp2-brownstone.dts
+++ b/arch/arm/boot/dts/mmp2-brownstone.dts
@@ -8,7 +8,7 @@
*/
/dts-v1/;
-/include/ "mmp2.dtsi"
+#include "mmp2.dtsi"
/ {
model = "Marvell MMP2 Brownstone Development Board";
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 4e8b08c..e44f996 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -7,7 +7,7 @@
* publishhed by the Free Software Foundation.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
aliases {
diff --git a/arch/arm/boot/dts/pxa168-aspenite.dts b/arch/arm/boot/dts/pxa168-aspenite.dts
index e762fac..0a988b3 100644
--- a/arch/arm/boot/dts/pxa168-aspenite.dts
+++ b/arch/arm/boot/dts/pxa168-aspenite.dts
@@ -8,7 +8,7 @@
*/
/dts-v1/;
-/include/ "pxa168.dtsi"
+#include "pxa168.dtsi"
/ {
model = "Marvell PXA168 Aspenite Development Board";
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
index 975dad2..bfcbdef 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -7,7 +7,7 @@
* publishhed by the Free Software Foundation.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
aliases {
diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts
index 595492a..c82f281 100644
--- a/arch/arm/boot/dts/pxa910-dkb.dts
+++ b/arch/arm/boot/dts/pxa910-dkb.dts
@@ -8,7 +8,7 @@
*/
/dts-v1/;
-/include/ "pxa910.dtsi"
+#include "pxa910.dtsi"
/ {
model = "Marvell PXA910 DKB Development Board";
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
index 0247c62..884c6e8 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -7,7 +7,7 @@
* publishhed by the Free Software Foundation.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
aliases {
--
1.8.3.2
From: Chao Xie <[email protected]>
Some clock control regsiter has bit to reset the cotroller.
So before enable the clock, we need deassert the reset pin.
Make use of reset controller framework to export reset interface
for device drivers, then device driver can control the reset action.
Signed-off-by: Chao Xie <[email protected]>
---
drivers/clk/mmp/Makefile | 2 +
drivers/clk/mmp/reset.c | 99 ++++++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/mmp/reset.h | 31 +++++++++++++++
3 files changed, 132 insertions(+)
create mode 100644 drivers/clk/mmp/reset.c
create mode 100644 drivers/clk/mmp/reset.h
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 32b5b90..2573d7c 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -4,6 +4,8 @@
obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
+obj-$(CONFIG_RESET_CONTROLLER) += reset.o
+
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o
diff --git a/drivers/clk/mmp/reset.c b/drivers/clk/mmp/reset.c
new file mode 100644
index 0000000..b54da1f
--- /dev/null
+++ b/drivers/clk/mmp/reset.c
@@ -0,0 +1,99 @@
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/reset-controller.h>
+
+#include "reset.h"
+
+#define rcdev_to_unit(rcdev) container_of(rcdev, struct mmp_clk_reset_unit, rcdev)
+
+static int mmp_of_reset_xlate(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec)
+{
+ struct mmp_clk_reset_unit *unit = rcdev_to_unit(rcdev);
+ struct mmp_clk_reset_cell *cell;
+ int i;
+
+ if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
+ return -EINVAL;
+
+ for (i = 0; i < rcdev->nr_resets; i++) {
+ cell = &unit->cells[i];
+ if (cell->clk_id == reset_spec->args[0])
+ break;
+ }
+
+ if (i == rcdev->nr_resets)
+ return -EINVAL;
+
+ return i;
+}
+
+static int mmp_clk_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct mmp_clk_reset_unit *unit = rcdev_to_unit(rcdev);
+ struct mmp_clk_reset_cell *cell;
+ unsigned long flags = 0;
+ u32 val;
+
+ cell = &unit->cells[id];
+ if (cell->lock)
+ spin_lock_irqsave(cell->lock, flags);
+
+ val = readl(cell->reg);
+ val |= cell->bits;
+ writel(val, cell->reg);
+
+ if (cell->lock)
+ spin_unlock_irqrestore(cell->lock, flags);
+
+ return 0;
+}
+
+static int mmp_clk_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct mmp_clk_reset_unit *unit = rcdev_to_unit(rcdev);
+ struct mmp_clk_reset_cell *cell;
+ unsigned long flags = 0;
+ u32 val;
+
+ cell = &unit->cells[id];
+ if (cell->lock)
+ spin_lock_irqsave(cell->lock, flags);
+
+ val = readl(cell->reg);
+ val &= ~cell->bits;
+ writel(val, cell->reg);
+
+ if (cell->lock)
+ spin_unlock_irqrestore(cell->lock, flags);
+
+ return 0;
+}
+
+static struct reset_control_ops mmp_clk_reset_ops = {
+ .assert = mmp_clk_reset_assert,
+ .deassert = mmp_clk_reset_deassert,
+};
+
+void mmp_clk_reset_register(struct device_node *np,
+ struct mmp_clk_reset_cell *cells, int nr_resets)
+{
+ struct mmp_clk_reset_unit *unit;
+
+ unit = kzalloc(sizeof(*unit), GFP_KERNEL);
+ if (!unit)
+ return;
+
+ unit->cells = cells;
+ unit->rcdev.of_reset_n_cells = 1;
+ unit->rcdev.nr_resets = nr_resets;
+ unit->rcdev.ops = &mmp_clk_reset_ops;
+ unit->rcdev.of_node = np;
+ unit->rcdev.of_xlate = mmp_of_reset_xlate;
+
+ reset_controller_register(&unit->rcdev);
+}
diff --git a/drivers/clk/mmp/reset.h b/drivers/clk/mmp/reset.h
new file mode 100644
index 0000000..be8b1a7
--- /dev/null
+++ b/drivers/clk/mmp/reset.h
@@ -0,0 +1,31 @@
+#ifndef __MACH_MMP_CLK_RESET_H
+#define __MACH_MMP_CLK_RESET_H
+
+#include <linux/reset-controller.h>
+
+#define MMP_RESET_INVERT 1
+
+struct mmp_clk_reset_cell {
+ unsigned int clk_id;
+ void __iomem *reg;
+ u32 bits;
+ unsigned int flags;
+ spinlock_t *lock;
+};
+
+struct mmp_clk_reset_unit {
+ struct reset_controller_dev rcdev;
+ struct mmp_clk_reset_cell *cells;
+};
+
+#ifdef CONFIG_RESET_CONTROLLER
+void mmp_clk_reset_register(struct device_node *np,
+ struct mmp_clk_reset_cell *cells, int nr_resets);
+#else
+static inline void mmp_clk_reset_register(struct device_node *np,
+ struct mmp_clk_reset_cell *cells, int nr_resets)
+{
+}
+#endif
+
+#endif
--
1.8.3.2
From: Chao Xie <[email protected]>
Some SOCes have this kind of the gate clock
1. There are some bits to control the gate not only one bit.
2. It is not always that "1" is to enable while "0" is to disable
when write register.
So we have to define the "mask", "enable_val", "disable_val" for
this kind of gate clock.
Signed-off-by: Chao Xie <[email protected]>
---
drivers/clk/mmp/Makefile | 2 +-
drivers/clk/mmp/clk-gate.c | 133 +++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/mmp/clk.h | 21 +++++++
3 files changed, 155 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/mmp/clk-gate.c
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 8bfee860..2855f7b 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -2,7 +2,7 @@
# Makefile for mmp specific clk
#
-obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o
+obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
diff --git a/drivers/clk/mmp/clk-gate.c b/drivers/clk/mmp/clk-gate.c
new file mode 100644
index 0000000..adbd9d6
--- /dev/null
+++ b/drivers/clk/mmp/clk-gate.c
@@ -0,0 +1,133 @@
+/*
+ * mmp gate clock operation source file
+ *
+ * Copyright (C) 2014 Marvell
+ * Chao Xie <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+
+#include "clk.h"
+
+/*
+ * Some clocks will have mutiple bits to enable the clocks, and
+ * the bits to disable the clock is not same as enabling bits.
+ */
+
+#define to_clk_mmp_gate(hw) container_of(hw, struct mmp_clk_gate, hw)
+
+static int mmp_clk_gate_enable(struct clk_hw *hw)
+{
+ struct mmp_clk_gate *gate = to_clk_mmp_gate(hw);
+ struct clk *clk = hw->clk;
+ unsigned long flags = 0;
+ unsigned long rate;
+ u32 tmp;
+
+ if (gate->lock)
+ spin_lock_irqsave(gate->lock, flags);
+
+ tmp = readl(gate->reg);
+ tmp &= ~gate->mask;
+ tmp |= gate->val_enable;
+ writel(tmp, gate->reg);
+
+ if (gate->lock)
+ spin_unlock_irqrestore(gate->lock, flags);
+
+ if (gate->flags & MMP_CLK_GATE_NEED_DELAY) {
+ rate = __clk_get_rate(clk);
+ /* Need delay 2 cycles. */
+ udelay(2000000/rate);
+ }
+
+ return 0;
+}
+
+static void mmp_clk_gate_disable(struct clk_hw *hw)
+{
+ struct mmp_clk_gate *gate = to_clk_mmp_gate(hw);
+ unsigned long flags = 0;
+ u32 tmp;
+
+ if (gate->lock)
+ spin_lock_irqsave(gate->lock, flags);
+
+ tmp = readl(gate->reg);
+ tmp &= ~gate->mask;
+ tmp |= gate->val_disable;
+ writel(tmp, gate->reg);
+
+ if (gate->lock)
+ spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static int mmp_clk_gate_is_enabled(struct clk_hw *hw)
+{
+ struct mmp_clk_gate *gate = to_clk_mmp_gate(hw);
+ unsigned long flags = 0;
+ u32 tmp;
+
+ if (gate->lock)
+ spin_lock_irqsave(gate->lock, flags);
+
+ tmp = readl(gate->reg);
+
+ if (gate->lock)
+ spin_unlock_irqrestore(gate->lock, flags);
+
+ return (tmp & gate->mask) == gate->val_enable;
+}
+
+const struct clk_ops mmp_clk_gate_ops = {
+ .enable = mmp_clk_gate_enable,
+ .disable = mmp_clk_gate_disable,
+ .is_enabled = mmp_clk_gate_is_enabled,
+};
+
+struct clk *mmp_clk_register_gate(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u32 mask, u32 val_enable, u32 val_disable,
+ unsigned int gate_flags, spinlock_t *lock)
+{
+ struct mmp_clk_gate *gate;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ /* allocate the gate */
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate) {
+ pr_err("%s:%s could not allocate gate clk\n", __func__, name);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &mmp_clk_gate_ops;
+ init.flags = flags | CLK_IS_BASIC;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ /* struct clk_gate assignments */
+ gate->reg = reg;
+ gate->mask = mask;
+ gate->val_enable = val_enable;
+ gate->val_disable = val_disable;
+ gate->flags = gate_flags;
+ gate->lock = lock;
+ gate->hw.init = &init;
+
+ clk = clk_register(dev, &gate->hw);
+
+ if (IS_ERR(clk))
+ kfree(gate);
+
+ return clk;
+}
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index 26b2469..2337106 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -103,6 +103,27 @@ extern struct clk *mmp_clk_register_mix(struct device *dev,
spinlock_t *lock);
+/* Clock type "gate". MMP private gate */
+#define MMP_CLK_GATE_NEED_DELAY BIT(0)
+
+struct mmp_clk_gate {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u32 mask;
+ u32 val_enable;
+ u32 val_disable;
+ unsigned int flags;
+ spinlock_t *lock;
+};
+
+extern const struct clk_ops mmp_clk_gate_ops;
+extern struct clk *mmp_clk_register_gate(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u32 mask, u32 val_enable,
+ u32 val_disable, unsigned int gate_flags,
+ spinlock_t *lock);
+
+
extern struct clk *mmp_clk_register_pll2(const char *name,
const char *parent_name, unsigned long flags);
extern struct clk *mmp_clk_register_apbc(const char *name,
--
1.8.3.2
From: Chao Xie <[email protected]>
Move the definition of structure of mmp_clk_frac to
clk.h.
So device tree support can use this structure.
Signed-off-by: Chao Xie <[email protected]>
---
drivers/clk/mmp/clk-frac.c | 8 --------
drivers/clk/mmp/clk.h | 32 ++++++++++++++++++++++----------
2 files changed, 22 insertions(+), 18 deletions(-)
diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c
index 1876d2c..eeba52c 100644
--- a/drivers/clk/mmp/clk-frac.c
+++ b/drivers/clk/mmp/clk-frac.c
@@ -23,14 +23,6 @@
*/
#define to_clk_factor(hw) container_of(hw, struct mmp_clk_factor, hw)
-struct mmp_clk_factor {
- struct clk_hw hw;
- void __iomem *base;
- struct mmp_clk_factor_masks *masks;
- struct mmp_clk_factor_tbl *ftbl;
- unsigned int ftbl_cnt;
- spinlock_t *lock;
-};
static long clk_factor_round_rate(struct clk_hw *hw, unsigned long drate,
unsigned long *prate)
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index b71b717..d267639 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -7,12 +7,14 @@
#define APBC_NO_BUS_CTRL BIT(0)
#define APBC_POWER_CTRL BIT(1)
+
+/* Clock type "factor" */
struct mmp_clk_factor_masks {
- unsigned int factor;
- unsigned int num_mask;
- unsigned int den_mask;
- unsigned int num_shift;
- unsigned int den_shift;
+ unsigned int factor;
+ unsigned int num_mask;
+ unsigned int den_mask;
+ unsigned int num_shift;
+ unsigned int den_shift;
};
struct mmp_clk_factor_tbl {
@@ -20,6 +22,21 @@ struct mmp_clk_factor_tbl {
unsigned int den;
};
+struct mmp_clk_factor {
+ struct clk_hw hw;
+ void __iomem *base;
+ struct mmp_clk_factor_masks *masks;
+ struct mmp_clk_factor_tbl *ftbl;
+ unsigned int ftbl_cnt;
+ spinlock_t *lock;
+};
+
+extern struct clk *mmp_clk_register_factor(const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *base, struct mmp_clk_factor_masks *masks,
+ struct mmp_clk_factor_tbl *ftbl, unsigned int ftbl_cnt,
+ spinlock_t *lock);
+
extern struct clk *mmp_clk_register_pll2(const char *name,
const char *parent_name, unsigned long flags);
extern struct clk *mmp_clk_register_apbc(const char *name,
@@ -28,9 +45,4 @@ extern struct clk *mmp_clk_register_apbc(const char *name,
extern struct clk *mmp_clk_register_apmu(const char *name,
const char *parent_name, void __iomem *base, u32 enable_mask,
spinlock_t *lock);
-extern struct clk *mmp_clk_register_factor(const char *name,
- const char *parent_name, unsigned long flags,
- void __iomem *base, struct mmp_clk_factor_masks *masks,
- struct mmp_clk_factor_tbl *ftbl, unsigned int ftbl_cnt,
- spinlock_t *lock);
#endif
--
1.8.3.2
From: Chao Xie <[email protected]>
For the clk-frac, we need to make sure that the initial
clock rate is one item of the table.
If it is not, we use the first item in the table by default.
Signed-off-by: Chao Xie <[email protected]>
---
drivers/clk/mmp/clk-frac.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c
index e29d006..1876d2c 100644
--- a/drivers/clk/mmp/clk-frac.c
+++ b/drivers/clk/mmp/clk-frac.c
@@ -118,10 +118,50 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
return 0;
}
+void clk_factor_init(struct clk_hw *hw)
+{
+ struct mmp_clk_factor *factor = to_clk_factor(hw);
+ struct mmp_clk_factor_masks *masks = factor->masks;
+ u32 val, num, den;
+ int i;
+ unsigned long flags = 0;
+
+ if (factor->lock)
+ spin_lock_irqsave(factor->lock, flags);
+
+ val = readl(factor->base);
+
+ /* calculate numerator */
+ num = (val >> masks->num_shift) & masks->num_mask;
+
+ /* calculate denominator */
+ den = (val >> masks->den_shift) & masks->den_mask;
+
+ for (i = 0; i < factor->ftbl_cnt; i++)
+ if (den == factor->ftbl[i].den && num == factor->ftbl[i].num)
+ break;
+
+ if (i >= factor->ftbl_cnt) {
+ val &= ~(masks->num_mask << masks->num_shift);
+ val |= (factor->ftbl[0].num & masks->num_mask) <<
+ masks->num_shift;
+
+ val &= ~(masks->den_mask << masks->den_shift);
+ val |= (factor->ftbl[0].den & masks->den_mask) <<
+ masks->den_shift;
+
+ writel(val, factor->base);
+ }
+
+ if (factor->lock)
+ spin_unlock_irqrestore(factor->lock, flags);
+}
+
static struct clk_ops clk_factor_ops = {
.recalc_rate = clk_factor_recalc_rate,
.round_rate = clk_factor_round_rate,
.set_rate = clk_factor_set_rate,
+ .init = clk_factor_init,
};
struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
--
1.8.3.2
From: Chao Xie <[email protected]>
The structures defined for clk-frac will be used out side
of clk-frac.c.
To avoid conflicts, add prefix "mmp" for these structures'
name.
Signed-off-by: Chao Xie <[email protected]>
---
drivers/clk/mmp/clk-frac.c | 23 ++++++++++++-----------
drivers/clk/mmp/clk-mmp2.c | 4 ++--
drivers/clk/mmp/clk-pxa168.c | 4 ++--
drivers/clk/mmp/clk-pxa910.c | 4 ++--
drivers/clk/mmp/clk.h | 8 ++++----
5 files changed, 22 insertions(+), 21 deletions(-)
diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c
index 23a56f5..3fbc9ca 100644
--- a/drivers/clk/mmp/clk-frac.c
+++ b/drivers/clk/mmp/clk-frac.c
@@ -22,19 +22,19 @@
* numerator/denominator = Fin / (Fout * factor)
*/
-#define to_clk_factor(hw) container_of(hw, struct clk_factor, hw)
-struct clk_factor {
+#define to_clk_factor(hw) container_of(hw, struct mmp_clk_factor, hw)
+struct mmp_clk_factor {
struct clk_hw hw;
void __iomem *base;
- struct clk_factor_masks *masks;
- struct clk_factor_tbl *ftbl;
+ struct mmp_clk_factor_masks *masks;
+ struct mmp_clk_factor_tbl *ftbl;
unsigned int ftbl_cnt;
};
static long clk_factor_round_rate(struct clk_hw *hw, unsigned long drate,
unsigned long *prate)
{
- struct clk_factor *factor = to_clk_factor(hw);
+ struct mmp_clk_factor *factor = to_clk_factor(hw);
unsigned long rate = 0, prev_rate;
int i;
@@ -58,8 +58,8 @@ static long clk_factor_round_rate(struct clk_hw *hw, unsigned long drate,
static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
- struct clk_factor *factor = to_clk_factor(hw);
- struct clk_factor_masks *masks = factor->masks;
+ struct mmp_clk_factor *factor = to_clk_factor(hw);
+ struct mmp_clk_factor_masks *masks = factor->masks;
unsigned int val, num, den;
val = readl_relaxed(factor->base);
@@ -81,8 +81,8 @@ static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
unsigned long prate)
{
- struct clk_factor *factor = to_clk_factor(hw);
- struct clk_factor_masks *masks = factor->masks;
+ struct mmp_clk_factor *factor = to_clk_factor(hw);
+ struct mmp_clk_factor_masks *masks = factor->masks;
int i;
unsigned long val;
unsigned long prev_rate, rate = 0;
@@ -118,10 +118,11 @@ static struct clk_ops clk_factor_ops = {
struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
unsigned long flags, void __iomem *base,
- struct clk_factor_masks *masks, struct clk_factor_tbl *ftbl,
+ struct mmp_clk_factor_masks *masks,
+ struct mmp_clk_factor_tbl *ftbl,
unsigned int ftbl_cnt)
{
- struct clk_factor *factor;
+ struct mmp_clk_factor *factor;
struct clk_init_data init;
struct clk *clk;
diff --git a/drivers/clk/mmp/clk-mmp2.c b/drivers/clk/mmp/clk-mmp2.c
index b2721ca..7083f12 100644
--- a/drivers/clk/mmp/clk-mmp2.c
+++ b/drivers/clk/mmp/clk-mmp2.c
@@ -54,7 +54,7 @@
static DEFINE_SPINLOCK(clk_lock);
-static struct clk_factor_masks uart_factor_masks = {
+static struct mmp_clk_factor_masks uart_factor_masks = {
.factor = 2,
.num_mask = 0x1fff,
.den_mask = 0x1fff,
@@ -62,7 +62,7 @@ static struct clk_factor_masks uart_factor_masks = {
.den_shift = 0,
};
-static struct clk_factor_tbl uart_factor_tbl[] = {
+static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
{.num = 14634, .den = 2165}, /*14.745MHZ */
{.num = 3521, .den = 689}, /*19.23MHZ */
{.num = 9679, .den = 5728}, /*58.9824MHZ */
diff --git a/drivers/clk/mmp/clk-pxa168.c b/drivers/clk/mmp/clk-pxa168.c
index 014396b..75266ac 100644
--- a/drivers/clk/mmp/clk-pxa168.c
+++ b/drivers/clk/mmp/clk-pxa168.c
@@ -47,7 +47,7 @@
static DEFINE_SPINLOCK(clk_lock);
-static struct clk_factor_masks uart_factor_masks = {
+static struct mmp_clk_factor_masks uart_factor_masks = {
.factor = 2,
.num_mask = 0x1fff,
.den_mask = 0x1fff,
@@ -55,7 +55,7 @@ static struct clk_factor_masks uart_factor_masks = {
.den_shift = 0,
};
-static struct clk_factor_tbl uart_factor_tbl[] = {
+static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
{.num = 8125, .den = 1536}, /*14.745MHZ */
};
diff --git a/drivers/clk/mmp/clk-pxa910.c b/drivers/clk/mmp/clk-pxa910.c
index 9efc6a4..f817999 100644
--- a/drivers/clk/mmp/clk-pxa910.c
+++ b/drivers/clk/mmp/clk-pxa910.c
@@ -45,7 +45,7 @@
static DEFINE_SPINLOCK(clk_lock);
-static struct clk_factor_masks uart_factor_masks = {
+static struct mmp_clk_factor_masks uart_factor_masks = {
.factor = 2,
.num_mask = 0x1fff,
.den_mask = 0x1fff,
@@ -53,7 +53,7 @@ static struct clk_factor_masks uart_factor_masks = {
.den_shift = 0,
};
-static struct clk_factor_tbl uart_factor_tbl[] = {
+static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
{.num = 8125, .den = 1536}, /*14.745MHZ */
};
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index ab86dd4..3fe92be 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -7,7 +7,7 @@
#define APBC_NO_BUS_CTRL BIT(0)
#define APBC_POWER_CTRL BIT(1)
-struct clk_factor_masks {
+struct mmp_clk_factor_masks {
unsigned int factor;
unsigned int num_mask;
unsigned int den_mask;
@@ -15,7 +15,7 @@ struct clk_factor_masks {
unsigned int den_shift;
};
-struct clk_factor_tbl {
+struct mmp_clk_factor_tbl {
unsigned int num;
unsigned int den;
};
@@ -30,6 +30,6 @@ extern struct clk *mmp_clk_register_apmu(const char *name,
spinlock_t *lock);
extern struct clk *mmp_clk_register_factor(const char *name,
const char *parent_name, unsigned long flags,
- void __iomem *base, struct clk_factor_masks *masks,
- struct clk_factor_tbl *ftbl, unsigned int ftbl_cnt);
+ void __iomem *base, struct mmp_clk_factor_masks *masks,
+ struct mmp_clk_factor_tbl *ftbl, unsigned int ftbl_cnt);
#endif
--
1.8.3.2
From: Chao Xie <[email protected]>
In order to support DT for mmp SOC clocks, it defines
some basic APIs which are shared by all mmp SOC clock
units.
Signed-off-by: Chao Xie <[email protected]>
---
drivers/clk/mmp/Makefile | 2 +-
drivers/clk/mmp/clk.c | 192 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/mmp/clk.h | 106 +++++++++++++++++++++++++-
3 files changed, 298 insertions(+), 2 deletions(-)
create mode 100644 drivers/clk/mmp/clk.c
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 2855f7b..32b5b90 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -2,7 +2,7 @@
# Makefile for mmp specific clk
#
-obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o
+obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
diff --git a/drivers/clk/mmp/clk.c b/drivers/clk/mmp/clk.c
new file mode 100644
index 0000000..cf038ef
--- /dev/null
+++ b/drivers/clk/mmp/clk.c
@@ -0,0 +1,192 @@
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk.h"
+
+void mmp_clk_init(struct device_node *np, struct mmp_clk_unit *unit,
+ int nr_clks)
+{
+ static struct clk **clk_table;
+
+ clk_table = kcalloc(nr_clks, sizeof(struct clk *), GFP_KERNEL);
+ if (!clk_table)
+ return;
+
+ unit->clk_table = clk_table;
+ unit->nr_clks = nr_clks;
+ unit->clk_data.clks = clk_table;
+ unit->clk_data.clk_num = nr_clks;
+ of_clk_add_provider(np, of_clk_src_onecell_get, &unit->clk_data);
+}
+
+void mmp_register_fixed_rate_clks(struct mmp_clk_unit *unit,
+ struct mmp_param_fixed_rate_clk *clks,
+ int size)
+{
+ int i;
+ struct clk *clk;
+
+ for (i = 0; i < size; i++) {
+ clk = clk_register_fixed_rate(NULL, clks[i].name,
+ clks[i].parent_name,
+ clks[i].flags,
+ clks[i].fixed_rate);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, clks[i].name);
+ continue;
+ }
+ if (clks[i].id)
+ unit->clk_table[clks[i].id] = clk;
+ }
+}
+
+void mmp_register_fixed_factor_clks(struct mmp_clk_unit *unit,
+ struct mmp_param_fixed_factor_clk *clks,
+ int size)
+{
+ struct clk *clk;
+ int i;
+
+ for (i = 0; i < size; i++) {
+ clk = clk_register_fixed_factor(NULL, clks[i].name,
+ clks[i].parent_name,
+ clks[i].flags, clks[i].mult,
+ clks[i].div);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, clks[i].name);
+ continue;
+ }
+ if (clks[i].id)
+ unit->clk_table[clks[i].id] = clk;
+ }
+}
+
+void mmp_register_general_gate_clks(struct mmp_clk_unit *unit,
+ struct mmp_param_general_gate_clk *clks,
+ void __iomem *base, int size)
+{
+ struct clk *clk;
+ int i;
+
+ for (i = 0; i < size; i++) {
+ clk = clk_register_gate(NULL, clks[i].name,
+ clks[i].parent_name,
+ clks[i].flags,
+ base + clks[i].offset,
+ clks[i].bit_idx,
+ clks[i].gate_flags,
+ clks[i].lock);
+
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, clks[i].name);
+ continue;
+ }
+ if (clks[i].id)
+ unit->clk_table[clks[i].id] = clk;
+ }
+}
+
+void mmp_register_gate_clks(struct mmp_clk_unit *unit,
+ struct mmp_param_gate_clk *clks,
+ void __iomem *base, int size)
+{
+ struct clk *clk;
+ int i;
+
+ for (i = 0; i < size; i++) {
+ clk = mmp_clk_register_gate(NULL, clks[i].name,
+ clks[i].parent_name,
+ clks[i].flags,
+ base + clks[i].offset,
+ clks[i].mask,
+ clks[i].val_enable,
+ clks[i].val_disable,
+ clks[i].gate_flags,
+ clks[i].lock);
+
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, clks[i].name);
+ continue;
+ }
+ if (clks[i].id)
+ unit->clk_table[clks[i].id] = clk;
+ }
+}
+
+void mmp_register_mux_clks(struct mmp_clk_unit *unit,
+ struct mmp_param_mux_clk *clks,
+ void __iomem *base, int size)
+{
+ struct clk *clk;
+ int i;
+
+ for (i = 0; i < size; i++) {
+ clk = clk_register_mux(NULL, clks[i].name,
+ clks[i].parent_name,
+ clks[i].num_parents,
+ clks[i].flags,
+ base + clks[i].offset,
+ clks[i].shift,
+ clks[i].width,
+ clks[i].mux_flags,
+ clks[i].lock);
+
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, clks[i].name);
+ continue;
+ }
+ if (clks[i].id)
+ unit->clk_table[clks[i].id] = clk;
+ }
+}
+
+void mmp_register_div_clks(struct mmp_clk_unit *unit,
+ struct mmp_param_div_clk *clks,
+ void __iomem *base, int size)
+{
+ struct clk *clk;
+ int i;
+
+ for (i = 0; i < size; i++) {
+ clk = clk_register_divider(NULL, clks[i].name,
+ clks[i].parent_name,
+ clks[i].flags,
+ base + clks[i].offset,
+ clks[i].shift,
+ clks[i].width,
+ clks[i].div_flags,
+ clks[i].lock);
+
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, clks[i].name);
+ continue;
+ }
+ if (clks[i].id)
+ unit->clk_table[clks[i].id] = clk;
+ }
+}
+
+void mmp_clk_add(struct mmp_clk_unit *unit, unsigned int id,
+ struct clk *clk)
+{
+ if (IS_ERR_OR_NULL(clk)) {
+ pr_err("CLK %d has invalid pointer %p\n", id, clk);
+ return;
+ }
+ if (id > unit->nr_clks) {
+ pr_err("CLK %d is invalid\n", id);
+ return;
+ }
+
+ unit->clk_table[id] = clk;
+}
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index 2337106..adf9b71 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -96,8 +96,8 @@ struct mmp_clk_mix {
extern const struct clk_ops mmp_clk_mix_ops;
extern struct clk *mmp_clk_register_mix(struct device *dev,
const char *name,
- u8 num_parents,
const char **parent_names,
+ u8 num_parents,
unsigned long flags,
struct mmp_clk_mix_config *config,
spinlock_t *lock);
@@ -132,4 +132,108 @@ extern struct clk *mmp_clk_register_apbc(const char *name,
extern struct clk *mmp_clk_register_apmu(const char *name,
const char *parent_name, void __iomem *base, u32 enable_mask,
spinlock_t *lock);
+
+struct mmp_clk_unit {
+ unsigned int nr_clks;
+ struct clk **clk_table;
+ struct clk_onecell_data clk_data;
+};
+
+struct mmp_param_fixed_rate_clk {
+ unsigned int id;
+ char *name;
+ const char *parent_name;
+ unsigned long flags;
+ unsigned long fixed_rate;
+};
+void mmp_register_fixed_rate_clks(struct mmp_clk_unit *unit,
+ struct mmp_param_fixed_rate_clk *clks,
+ int size);
+
+struct mmp_param_fixed_factor_clk {
+ unsigned int id;
+ char *name;
+ const char *parent_name;
+ unsigned long mult;
+ unsigned long div;
+ unsigned long flags;
+};
+void mmp_register_fixed_factor_clks(struct mmp_clk_unit *unit,
+ struct mmp_param_fixed_factor_clk *clks,
+ int size);
+
+struct mmp_param_general_gate_clk {
+ unsigned int id;
+ const char *name;
+ const char *parent_name;
+ unsigned long flags;
+ unsigned long offset;
+ u8 bit_idx;
+ u8 gate_flags;
+ spinlock_t *lock;
+};
+void mmp_register_general_gate_clks(struct mmp_clk_unit *unit,
+ struct mmp_param_general_gate_clk *clks,
+ void __iomem *base, int size);
+
+struct mmp_param_gate_clk {
+ unsigned int id;
+ char *name;
+ const char *parent_name;
+ unsigned long flags;
+ unsigned long offset;
+ u32 mask;
+ u32 val_enable;
+ u32 val_disable;
+ unsigned int gate_flags;
+ spinlock_t *lock;
+};
+void mmp_register_gate_clks(struct mmp_clk_unit *unit,
+ struct mmp_param_gate_clk *clks,
+ void __iomem *base, int size);
+
+struct mmp_param_mux_clk {
+ unsigned int id;
+ char *name;
+ const char **parent_name;
+ u8 num_parents;
+ unsigned long flags;
+ unsigned long offset;
+ u8 shift;
+ u8 width;
+ u8 mux_flags;
+ spinlock_t *lock;
+};
+void mmp_register_mux_clks(struct mmp_clk_unit *unit,
+ struct mmp_param_mux_clk *clks,
+ void __iomem *base, int size);
+
+struct mmp_param_div_clk {
+ unsigned int id;
+ char *name;
+ const char *parent_name;
+ unsigned long flags;
+ unsigned long offset;
+ u8 shift;
+ u8 width;
+ u8 div_flags;
+ spinlock_t *lock;
+};
+void mmp_register_div_clks(struct mmp_clk_unit *unit,
+ struct mmp_param_div_clk *clks,
+ void __iomem *base, int size);
+
+#define DEFINE_MIX_REG_INFO(w_d, s_d, w_m, s_m, fc) \
+{ \
+ .width_div = (w_d), \
+ .shift_div = (s_d), \
+ .width_mux = (w_m), \
+ .shift_mux = (s_m), \
+ .bit_fc = (fc), \
+}
+
+void mmp_clk_init(struct device_node *np, struct mmp_clk_unit *unit,
+ int nr_clks);
+void mmp_clk_add(struct mmp_clk_unit *unit, unsigned int id,
+ struct clk *clk);
#endif
--
1.8.3.2
From: Chao Xie <[email protected]>
The register used by clk-frac may be shared with
other clocks.
So it needs to use spin lock to protect the register
access.
Signed-off-by: Chao Xie <[email protected]>
---
drivers/clk/mmp/clk-frac.c | 11 ++++++++++-
drivers/clk/mmp/clk-mmp2.c | 2 +-
drivers/clk/mmp/clk-pxa168.c | 2 +-
drivers/clk/mmp/clk-pxa910.c | 2 +-
drivers/clk/mmp/clk.h | 3 ++-
5 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c
index 3fbc9ca..e29d006 100644
--- a/drivers/clk/mmp/clk-frac.c
+++ b/drivers/clk/mmp/clk-frac.c
@@ -29,6 +29,7 @@ struct mmp_clk_factor {
struct mmp_clk_factor_masks *masks;
struct mmp_clk_factor_tbl *ftbl;
unsigned int ftbl_cnt;
+ spinlock_t *lock;
};
static long clk_factor_round_rate(struct clk_hw *hw, unsigned long drate,
@@ -86,6 +87,7 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
int i;
unsigned long val;
unsigned long prev_rate, rate = 0;
+ unsigned long flags = 0;
for (i = 0; i < factor->ftbl_cnt; i++) {
prev_rate = rate;
@@ -97,6 +99,9 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
if (i > 0)
i--;
+ if (factor->lock)
+ spin_lock_irqsave(factor->lock, flags);
+
val = readl_relaxed(factor->base);
val &= ~(masks->num_mask << masks->num_shift);
@@ -107,6 +112,9 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
writel_relaxed(val, factor->base);
+ if (factor->lock)
+ spin_unlock_irqrestore(factor->lock, flags);
+
return 0;
}
@@ -120,7 +128,7 @@ struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
unsigned long flags, void __iomem *base,
struct mmp_clk_factor_masks *masks,
struct mmp_clk_factor_tbl *ftbl,
- unsigned int ftbl_cnt)
+ unsigned int ftbl_cnt, spinlock_t *lock)
{
struct mmp_clk_factor *factor;
struct clk_init_data init;
@@ -143,6 +151,7 @@ struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
factor->ftbl = ftbl;
factor->ftbl_cnt = ftbl_cnt;
factor->hw.init = &init;
+ factor->lock = lock;
init.name = name;
init.ops = &clk_factor_ops;
diff --git a/drivers/clk/mmp/clk-mmp2.c b/drivers/clk/mmp/clk-mmp2.c
index 7083f12..5c90a42 100644
--- a/drivers/clk/mmp/clk-mmp2.c
+++ b/drivers/clk/mmp/clk-mmp2.c
@@ -191,7 +191,7 @@ void __init mmp2_clk_init(void)
clk = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
mpmu_base + MPMU_UART_PLL,
&uart_factor_masks, uart_factor_tbl,
- ARRAY_SIZE(uart_factor_tbl));
+ ARRAY_SIZE(uart_factor_tbl), &clk_lock);
clk_set_rate(clk, 14745600);
clk_register_clkdev(clk, "uart_pll", NULL);
diff --git a/drivers/clk/mmp/clk-pxa168.c b/drivers/clk/mmp/clk-pxa168.c
index 75266ac..93e967c 100644
--- a/drivers/clk/mmp/clk-pxa168.c
+++ b/drivers/clk/mmp/clk-pxa168.c
@@ -158,7 +158,7 @@ void __init pxa168_clk_init(void)
uart_pll = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
mpmu_base + MPMU_UART_PLL,
&uart_factor_masks, uart_factor_tbl,
- ARRAY_SIZE(uart_factor_tbl));
+ ARRAY_SIZE(uart_factor_tbl), &clk_lock);
clk_set_rate(uart_pll, 14745600);
clk_register_clkdev(uart_pll, "uart_pll", NULL);
diff --git a/drivers/clk/mmp/clk-pxa910.c b/drivers/clk/mmp/clk-pxa910.c
index f817999..993abcd 100644
--- a/drivers/clk/mmp/clk-pxa910.c
+++ b/drivers/clk/mmp/clk-pxa910.c
@@ -163,7 +163,7 @@ void __init pxa910_clk_init(void)
uart_pll = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
mpmu_base + MPMU_UART_PLL,
&uart_factor_masks, uart_factor_tbl,
- ARRAY_SIZE(uart_factor_tbl));
+ ARRAY_SIZE(uart_factor_tbl), &clk_lock);
clk_set_rate(uart_pll, 14745600);
clk_register_clkdev(uart_pll, "uart_pll", NULL);
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index 3fe92be..b71b717 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -31,5 +31,6 @@ extern struct clk *mmp_clk_register_apmu(const char *name,
extern struct clk *mmp_clk_register_factor(const char *name,
const char *parent_name, unsigned long flags,
void __iomem *base, struct mmp_clk_factor_masks *masks,
- struct mmp_clk_factor_tbl *ftbl, unsigned int ftbl_cnt);
+ struct mmp_clk_factor_tbl *ftbl, unsigned int ftbl_cnt,
+ spinlock_t *lock);
#endif
--
1.8.3.2
On Fri, Oct 31, 2014 at 10:13 AM, Chao Xie <[email protected]> wrote:
> From: Chao Xie <[email protected]>
>
> The patch set focuses at support device tree for clock.
>
> The first part of the patches
> clk: mmp: add prefix "mmp" for structures defined for clk-frac
> clk: mmp: add spin lock for clk-frac
> clk: mmp: add init callback for clk-frac
> clk: mmp: move definiton of mmp_clk_frac to clk.h It enhances the clk-frac.
>
> The second part of the patches
> clk: mmp: add clock type mix
> clk: mmp: add mmp private gate clock
>
> The third part of the patches
> clk: mmp: add basic support functions for DT support
> clk: mmp: add reset support
> clk: mmp: add pxa168 DT support for clock driver
> clk: mmp: add pxa910 DT support for clock driver
> clk: mmp: add mmp2 DT support for clock driver
> It add the device tree support for pxa168, pxa910 and mmp2.
>
> V1 -> V2:
> Add reset support for the clocks that have reset bit.
>
> Chao Xie (13):
> clk: mmp: add prefix "mmp" for structures defined for clk-frac
> clk: mmp: add spin lock for clk-frac
> clk: mmp: add init callback for clk-frac
> clk: mmp: move definiton of mmp_clk_frac to clk.h
> clk: mmp: add clock type mix
> clk: mmp: add mmp private gate clock
> clk: mmp: add basic support functions for DT support
> clk: mmp: add reset support
> clk: mmp: add pxa168 DT support for clock driver
> clk: mmp: add pxa910 DT support for clock driver
> clk: mmp: add mmp2 DT support for clock driver
> arm: mmp: Make all the dts file to be compiled by Makefile
> arm: mmp: Make use of the DT supported clock
>
> .../devicetree/bindings/clock/marvell,mmp2.txt | 21 +
> .../devicetree/bindings/clock/marvell,pxa168.txt | 21 +
> .../devicetree/bindings/clock/marvell,pxa910.txt | 21 +
> arch/arm/boot/dts/Makefile | 3 +
> arch/arm/boot/dts/mmp2-brownstone.dts | 2 +-
> arch/arm/boot/dts/mmp2.dtsi | 29 +-
> arch/arm/boot/dts/pxa168-aspenite.dts | 2 +-
> arch/arm/boot/dts/pxa168.dtsi | 27 +-
> arch/arm/boot/dts/pxa910-dkb.dts | 2 +-
> arch/arm/boot/dts/pxa910.dtsi | 28 +-
> arch/arm/mach-mmp/Kconfig | 12 +-
> arch/arm/mach-mmp/mmp-dt.c | 57 +--
> arch/arm/mach-mmp/mmp2-dt.c | 26 +-
> drivers/clk/mmp/Makefile | 7 +-
> drivers/clk/mmp/clk-frac.c | 74 ++-
> drivers/clk/mmp/clk-gate.c | 133 ++++++
> drivers/clk/mmp/clk-mix.c | 513 +++++++++++++++++++++
> drivers/clk/mmp/clk-mmp2.c | 6 +-
> drivers/clk/mmp/clk-of-mmp2.c | 334 ++++++++++++++
> drivers/clk/mmp/clk-of-pxa168.c | 279 +++++++++++
> drivers/clk/mmp/clk-of-pxa910.c | 301 ++++++++++++
> drivers/clk/mmp/clk-pxa168.c | 6 +-
> drivers/clk/mmp/clk-pxa910.c | 6 +-
> drivers/clk/mmp/clk.c | 192 ++++++++
> drivers/clk/mmp/clk.h | 226 ++++++++-
> drivers/clk/mmp/reset.c | 99 ++++
> drivers/clk/mmp/reset.h | 31 ++
> include/dt-bindings/clock/marvell,mmp2.h | 74 +++
> include/dt-bindings/clock/marvell,pxa168.h | 57 +++
> include/dt-bindings/clock/marvell,pxa910.h | 54 +++
> 30 files changed, 2538 insertions(+), 105 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/marvell,mmp2.txt
> create mode 100644 Documentation/devicetree/bindings/clock/marvell,pxa168.txt
> create mode 100644 Documentation/devicetree/bindings/clock/marvell,pxa910.txt
> create mode 100644 drivers/clk/mmp/clk-gate.c
> create mode 100644 drivers/clk/mmp/clk-mix.c
> create mode 100644 drivers/clk/mmp/clk-of-mmp2.c
> create mode 100644 drivers/clk/mmp/clk-of-pxa168.c
> create mode 100644 drivers/clk/mmp/clk-of-pxa910.c
> create mode 100644 drivers/clk/mmp/clk.c
> create mode 100644 drivers/clk/mmp/reset.c
> create mode 100644 drivers/clk/mmp/reset.h
> create mode 100644 include/dt-bindings/clock/marvell,mmp2.h
> create mode 100644 include/dt-bindings/clock/marvell,pxa168.h
> create mode 100644 include/dt-bindings/clock/marvell,pxa910.h
>
> --
> 1.8.3.2
>
Acked-by: Haojian Zhuang <[email protected]>
Mike,
Please merge all mach-mmp patches with clock together. Otherwise, it
may result in build issue.
Best Regards
Haojian
Quoting Haojian Zhuang (2014-11-04 00:15:55)
> On Fri, Oct 31, 2014 at 10:13 AM, Chao Xie <[email protected]> wrote:
> > From: Chao Xie <[email protected]>
> >
> > The patch set focuses at support device tree for clock.
> >
> > The first part of the patches
> > clk: mmp: add prefix "mmp" for structures defined for clk-frac
> > clk: mmp: add spin lock for clk-frac
> > clk: mmp: add init callback for clk-frac
> > clk: mmp: move definiton of mmp_clk_frac to clk.h It enhances the clk-frac.
> >
> > The second part of the patches
> > clk: mmp: add clock type mix
> > clk: mmp: add mmp private gate clock
> >
> > The third part of the patches
> > clk: mmp: add basic support functions for DT support
> > clk: mmp: add reset support
> > clk: mmp: add pxa168 DT support for clock driver
> > clk: mmp: add pxa910 DT support for clock driver
> > clk: mmp: add mmp2 DT support for clock driver
> > It add the device tree support for pxa168, pxa910 and mmp2.
> >
> > V1 -> V2:
> > Add reset support for the clocks that have reset bit.
> >
> > Chao Xie (13):
> > clk: mmp: add prefix "mmp" for structures defined for clk-frac
> > clk: mmp: add spin lock for clk-frac
> > clk: mmp: add init callback for clk-frac
> > clk: mmp: move definiton of mmp_clk_frac to clk.h
> > clk: mmp: add clock type mix
> > clk: mmp: add mmp private gate clock
> > clk: mmp: add basic support functions for DT support
> > clk: mmp: add reset support
> > clk: mmp: add pxa168 DT support for clock driver
> > clk: mmp: add pxa910 DT support for clock driver
> > clk: mmp: add mmp2 DT support for clock driver
> > arm: mmp: Make all the dts file to be compiled by Makefile
> > arm: mmp: Make use of the DT supported clock
> >
> > .../devicetree/bindings/clock/marvell,mmp2.txt | 21 +
> > .../devicetree/bindings/clock/marvell,pxa168.txt | 21 +
> > .../devicetree/bindings/clock/marvell,pxa910.txt | 21 +
> > arch/arm/boot/dts/Makefile | 3 +
> > arch/arm/boot/dts/mmp2-brownstone.dts | 2 +-
> > arch/arm/boot/dts/mmp2.dtsi | 29 +-
> > arch/arm/boot/dts/pxa168-aspenite.dts | 2 +-
> > arch/arm/boot/dts/pxa168.dtsi | 27 +-
> > arch/arm/boot/dts/pxa910-dkb.dts | 2 +-
> > arch/arm/boot/dts/pxa910.dtsi | 28 +-
> > arch/arm/mach-mmp/Kconfig | 12 +-
> > arch/arm/mach-mmp/mmp-dt.c | 57 +--
> > arch/arm/mach-mmp/mmp2-dt.c | 26 +-
> > drivers/clk/mmp/Makefile | 7 +-
> > drivers/clk/mmp/clk-frac.c | 74 ++-
> > drivers/clk/mmp/clk-gate.c | 133 ++++++
> > drivers/clk/mmp/clk-mix.c | 513 +++++++++++++++++++++
> > drivers/clk/mmp/clk-mmp2.c | 6 +-
> > drivers/clk/mmp/clk-of-mmp2.c | 334 ++++++++++++++
> > drivers/clk/mmp/clk-of-pxa168.c | 279 +++++++++++
> > drivers/clk/mmp/clk-of-pxa910.c | 301 ++++++++++++
> > drivers/clk/mmp/clk-pxa168.c | 6 +-
> > drivers/clk/mmp/clk-pxa910.c | 6 +-
> > drivers/clk/mmp/clk.c | 192 ++++++++
> > drivers/clk/mmp/clk.h | 226 ++++++++-
> > drivers/clk/mmp/reset.c | 99 ++++
> > drivers/clk/mmp/reset.h | 31 ++
> > include/dt-bindings/clock/marvell,mmp2.h | 74 +++
> > include/dt-bindings/clock/marvell,pxa168.h | 57 +++
> > include/dt-bindings/clock/marvell,pxa910.h | 54 +++
> > 30 files changed, 2538 insertions(+), 105 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/clock/marvell,mmp2.txt
> > create mode 100644 Documentation/devicetree/bindings/clock/marvell,pxa168.txt
> > create mode 100644 Documentation/devicetree/bindings/clock/marvell,pxa910.txt
> > create mode 100644 drivers/clk/mmp/clk-gate.c
> > create mode 100644 drivers/clk/mmp/clk-mix.c
> > create mode 100644 drivers/clk/mmp/clk-of-mmp2.c
> > create mode 100644 drivers/clk/mmp/clk-of-pxa168.c
> > create mode 100644 drivers/clk/mmp/clk-of-pxa910.c
> > create mode 100644 drivers/clk/mmp/clk.c
> > create mode 100644 drivers/clk/mmp/reset.c
> > create mode 100644 drivers/clk/mmp/reset.h
> > create mode 100644 include/dt-bindings/clock/marvell,mmp2.h
> > create mode 100644 include/dt-bindings/clock/marvell,pxa168.h
> > create mode 100644 include/dt-bindings/clock/marvell,pxa910.h
> >
> > --
> > 1.8.3.2
> >
>
> Acked-by: Haojian Zhuang <[email protected]>
>
> Mike,
> Please merge all mach-mmp patches with clock together. Otherwise, it
> may result in build issue.
Can patches #12 & #13 go through arm-soc?
Regards,
Mike
>
> Best Regards
> Haojian
On 13 November 2014 08:35, Mike Turquette <[email protected]> wrote:
> Quoting Haojian Zhuang (2014-11-04 00:15:55)
>> On Fri, Oct 31, 2014 at 10:13 AM, Chao Xie <[email protected]> wrote:
>> > From: Chao Xie <[email protected]>
>> >
>> > The patch set focuses at support device tree for clock.
>> >
>> > The first part of the patches
>> > clk: mmp: add prefix "mmp" for structures defined for clk-frac
>> > clk: mmp: add spin lock for clk-frac
>> > clk: mmp: add init callback for clk-frac
>> > clk: mmp: move definiton of mmp_clk_frac to clk.h It enhances the clk-frac.
>> >
>> > The second part of the patches
>> > clk: mmp: add clock type mix
>> > clk: mmp: add mmp private gate clock
>> >
>> > The third part of the patches
>> > clk: mmp: add basic support functions for DT support
>> > clk: mmp: add reset support
>> > clk: mmp: add pxa168 DT support for clock driver
>> > clk: mmp: add pxa910 DT support for clock driver
>> > clk: mmp: add mmp2 DT support for clock driver
>> > It add the device tree support for pxa168, pxa910 and mmp2.
>> >
>> > V1 -> V2:
>> > Add reset support for the clocks that have reset bit.
>> >
>> > Chao Xie (13):
>> > clk: mmp: add prefix "mmp" for structures defined for clk-frac
>> > clk: mmp: add spin lock for clk-frac
>> > clk: mmp: add init callback for clk-frac
>> > clk: mmp: move definiton of mmp_clk_frac to clk.h
>> > clk: mmp: add clock type mix
>> > clk: mmp: add mmp private gate clock
>> > clk: mmp: add basic support functions for DT support
>> > clk: mmp: add reset support
>> > clk: mmp: add pxa168 DT support for clock driver
>> > clk: mmp: add pxa910 DT support for clock driver
>> > clk: mmp: add mmp2 DT support for clock driver
>> > arm: mmp: Make all the dts file to be compiled by Makefile
>> > arm: mmp: Make use of the DT supported clock
>> >
>> > .../devicetree/bindings/clock/marvell,mmp2.txt | 21 +
>> > .../devicetree/bindings/clock/marvell,pxa168.txt | 21 +
>> > .../devicetree/bindings/clock/marvell,pxa910.txt | 21 +
>> > arch/arm/boot/dts/Makefile | 3 +
>> > arch/arm/boot/dts/mmp2-brownstone.dts | 2 +-
>> > arch/arm/boot/dts/mmp2.dtsi | 29 +-
>> > arch/arm/boot/dts/pxa168-aspenite.dts | 2 +-
>> > arch/arm/boot/dts/pxa168.dtsi | 27 +-
>> > arch/arm/boot/dts/pxa910-dkb.dts | 2 +-
>> > arch/arm/boot/dts/pxa910.dtsi | 28 +-
>> > arch/arm/mach-mmp/Kconfig | 12 +-
>> > arch/arm/mach-mmp/mmp-dt.c | 57 +--
>> > arch/arm/mach-mmp/mmp2-dt.c | 26 +-
>> > drivers/clk/mmp/Makefile | 7 +-
>> > drivers/clk/mmp/clk-frac.c | 74 ++-
>> > drivers/clk/mmp/clk-gate.c | 133 ++++++
>> > drivers/clk/mmp/clk-mix.c | 513 +++++++++++++++++++++
>> > drivers/clk/mmp/clk-mmp2.c | 6 +-
>> > drivers/clk/mmp/clk-of-mmp2.c | 334 ++++++++++++++
>> > drivers/clk/mmp/clk-of-pxa168.c | 279 +++++++++++
>> > drivers/clk/mmp/clk-of-pxa910.c | 301 ++++++++++++
>> > drivers/clk/mmp/clk-pxa168.c | 6 +-
>> > drivers/clk/mmp/clk-pxa910.c | 6 +-
>> > drivers/clk/mmp/clk.c | 192 ++++++++
>> > drivers/clk/mmp/clk.h | 226 ++++++++-
>> > drivers/clk/mmp/reset.c | 99 ++++
>> > drivers/clk/mmp/reset.h | 31 ++
>> > include/dt-bindings/clock/marvell,mmp2.h | 74 +++
>> > include/dt-bindings/clock/marvell,pxa168.h | 57 +++
>> > include/dt-bindings/clock/marvell,pxa910.h | 54 +++
>> > 30 files changed, 2538 insertions(+), 105 deletions(-)
>> > create mode 100644 Documentation/devicetree/bindings/clock/marvell,mmp2.txt
>> > create mode 100644 Documentation/devicetree/bindings/clock/marvell,pxa168.txt
>> > create mode 100644 Documentation/devicetree/bindings/clock/marvell,pxa910.txt
>> > create mode 100644 drivers/clk/mmp/clk-gate.c
>> > create mode 100644 drivers/clk/mmp/clk-mix.c
>> > create mode 100644 drivers/clk/mmp/clk-of-mmp2.c
>> > create mode 100644 drivers/clk/mmp/clk-of-pxa168.c
>> > create mode 100644 drivers/clk/mmp/clk-of-pxa910.c
>> > create mode 100644 drivers/clk/mmp/clk.c
>> > create mode 100644 drivers/clk/mmp/reset.c
>> > create mode 100644 drivers/clk/mmp/reset.h
>> > create mode 100644 include/dt-bindings/clock/marvell,mmp2.h
>> > create mode 100644 include/dt-bindings/clock/marvell,pxa168.h
>> > create mode 100644 include/dt-bindings/clock/marvell,pxa910.h
>> >
>> > --
>> > 1.8.3.2
>> >
>>
>> Acked-by: Haojian Zhuang <[email protected]>
>>
>> Mike,
>> Please merge all mach-mmp patches with clock together. Otherwise, it
>> may result in build issue.
>
> Can patches #12 & #13 go through arm-soc?
>
Hi Mike,
I also hope so. But patch #12 makes those dtb files built
automatically. And patch #13
references clocks that are defined in dt-binding files. If I merge
patch #12 & #13, I'll meet
build issue since I'm lack of those new dt-binding files. So it's
better to go through your
clock tree.
Best Regards
Haojian