The IEEE 802.11p amendment (already part of IEEE 802.11-2012)
specifies usage of 5 and 10 MHz wide channels in 5.9GHz band for
vehicular environment. All the 802.11p compliant devices should
be set to the newly added operation mode -- OCB (Outside the
Context of a BSS). No authentication/association is necessary to
communicate. The only parameter to be configured is the channel
(central frequency and bandwidth) to communicate on. The channel
has to be known a priori. It is set during the 'ocb join'
operation (sent via netlink message from user-space).
This patchset adds the OCB mode, OCB join and leave handling
(nl80211, cfg80211, mac80211), 802.11p EDCA parameters
modification, RX and TX path (for unicast/broadcast messages).
What aspects are ignored for now:
* Rate control -- We limit the supported datarates to the .11a
mandatory rates and use the Minstrel as usual
* Actually restricting the OCB mode to the 5.9GHz band
Tested with the ath9k card with slightly modified driver.
User-space configuration utilities are not part of this patch.
Changes since v2:
* Make each separate patch warning-free (define dummy "case
NL80211_IFTYPE_OCB" statements to mac80211 for the "cfg80211
patch") (JBerg)
* Remove unnecessary check in nl80211_join_ocb() (JBerg)
* Do not forget to call __cfg80211_leave_ocb() in __cfg80211_leave()
(JBerg)
Changes since v1:
* Do not define bssid_wildcard in a header file, define it as
'static const' in ieee80211_setup_sdata only (JBerg)
* Use GFP_ATOMIC memory allocation in ieee80211_ocb_rx_no_sta
so it can be called in the RX path (JBerg)
* IEEE80211_CHANCTX_EXCLUSIVE -> IEEE80211_CHANCTX_SHARED (JBerg)
* Fix the situation when the housekeeping timer might be called
during ocb_leave() (JBerg)
* Remove NL80211_CHAN_WIDTH_5/10 from 'old channels' handling
functions cfg80211_get_chandef_type() and nl80211_send_chandef()
(JBerg)
* Do not break ABI by adding new fields in the middle of the enum
nl80211_commands (JBerg)
* Add a flag denoting whether we are joined to the network or not
* Handle multiple consecutive calls to ocb_join
* Many minor fixes
Rostislav Lisovy (2):
cfg80211: mac80211: 802.11p OCB mode handling
mac80211: 802.11p OCB mode support
include/net/cfg80211.h | 14 +++
include/net/mac80211.h | 2 +
include/uapi/linux/nl80211.h | 11 ++
net/mac80211/Kconfig | 11 ++
net/mac80211/Makefile | 3 +-
net/mac80211/cfg.c | 14 +++
net/mac80211/chan.c | 3 +
net/mac80211/debug.h | 10 ++
net/mac80211/driver-ops.h | 3 +-
net/mac80211/ieee80211_i.h | 29 +++++
net/mac80211/iface.c | 23 ++++
net/mac80211/ocb.c | 250 +++++++++++++++++++++++++++++++++++++++++++
net/mac80211/rx.c | 35 ++++++
net/mac80211/tx.c | 15 +++
net/mac80211/util.c | 31 +++++-
net/mac80211/wme.c | 4 +
net/wireless/Makefile | 2 +-
net/wireless/chan.c | 8 ++
net/wireless/core.c | 3 +
net/wireless/core.h | 12 +++
net/wireless/nl80211.c | 39 +++++++
net/wireless/ocb.c | 88 +++++++++++++++
net/wireless/rdev-ops.h | 21 ++++
net/wireless/trace.h | 21 ++++
net/wireless/util.c | 5 +-
25 files changed, 648 insertions(+), 9 deletions(-)
create mode 100644 net/mac80211/ocb.c
create mode 100644 net/wireless/ocb.c
--
2.0.0.rc4
This patch adds 802.11p OCB (Outside the Context of a BSS) mode
support.
When communicating in OCB mode a mandatory wildcard BSSID
(48 '1' bits) is used.
The EDCA parameters handling function was changed to support
802.11p specific values.
The insertion of a newly discovered STAs is done in the similar way
as in the IBSS mode -- through the deferred insertion.
The OCB mode uses a periodic 'housekeeping task' for expiration of
disconnected STAs (in the similar manner as in the MESH mode).
New Kconfig option for verbose OCB debugging outputs is added.
Signed-off-by: Rostislav Lisovy <[email protected]>
---
include/net/mac80211.h | 2 +
net/mac80211/Kconfig | 11 ++
net/mac80211/Makefile | 3 +-
net/mac80211/cfg.c | 13 +++
net/mac80211/chan.c | 1 +
net/mac80211/debug.h | 10 ++
net/mac80211/driver-ops.h | 3 +-
net/mac80211/ieee80211_i.h | 29 ++++++
net/mac80211/iface.c | 20 +++-
net/mac80211/ocb.c | 250 +++++++++++++++++++++++++++++++++++++++++++++
net/mac80211/rx.c | 35 +++++++
net/mac80211/tx.c | 15 +++
net/mac80211/util.c | 30 ++++--
net/mac80211/wme.c | 4 +
14 files changed, 417 insertions(+), 9 deletions(-)
create mode 100644 net/mac80211/ocb.c
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 1614b2f..34ab261 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -263,6 +263,7 @@ struct ieee80211_vif_chanctx_switch {
* @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed,
* note that this is only called when it changes after the channel
* context had been assigned.
+ * @BSS_CHANGED_OCB: OCB join status changed
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -287,6 +288,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_P2P_PS = 1<<19,
BSS_CHANGED_BEACON_INFO = 1<<20,
BSS_CHANGED_BANDWIDTH = 1<<21,
+ BSS_CHANGED_OCB = 1<<22,
/* when adding here, make sure to change ieee80211_reconfig */
};
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 67cf812..75cc680 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -176,6 +176,17 @@ config MAC80211_HT_DEBUG
Do not select this option.
+config MAC80211_OCB_DEBUG
+ bool "Verbose OCB debugging"
+ depends on MAC80211_DEBUG_MENU
+ ---help---
+ Selecting this option causes mac80211 to print out
+ very verbose OCB debugging messages. It should not
+ be selected on production systems as those messages
+ are remotely triggerable.
+
+ Do not select this option.
+
config MAC80211_IBSS_DEBUG
bool "Verbose IBSS debugging"
depends on MAC80211_DEBUG_MENU
diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile
index 7273d27..e53671b 100644
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -27,7 +27,8 @@ mac80211-y := \
event.o \
chan.o \
trace.o mlme.o \
- tdls.o
+ tdls.o \
+ ocb.o
mac80211-$(CONFIG_MAC80211_LEDS) += led.o
mac80211-$(CONFIG_MAC80211_DEBUGFS) += \
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 643a10a..57a38fc 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2019,6 +2019,17 @@ static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
return ieee80211_ibss_leave(IEEE80211_DEV_TO_SUB_IF(dev));
}
+static int ieee80211_join_ocb(struct wiphy *wiphy, struct net_device *dev,
+ struct ocb_setup *setup)
+{
+ return ieee80211_ocb_join(IEEE80211_DEV_TO_SUB_IF(dev), setup);
+}
+
+static int ieee80211_leave_ocb(struct wiphy *wiphy, struct net_device *dev)
+{
+ return ieee80211_ocb_leave(IEEE80211_DEV_TO_SUB_IF(dev));
+}
+
static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev,
int rate[IEEE80211_NUM_BANDS])
{
@@ -3690,6 +3701,8 @@ const struct cfg80211_ops mac80211_config_ops = {
.join_mesh = ieee80211_join_mesh,
.leave_mesh = ieee80211_leave_mesh,
#endif
+ .join_ocb = ieee80211_join_ocb,
+ .leave_ocb = ieee80211_leave_ocb,
.change_bss = ieee80211_change_bss,
.set_txq_params = ieee80211_set_txq_params,
.set_monitor_channel = ieee80211_set_monitor_channel,
diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index ff1f877..c7c5142 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -675,6 +675,7 @@ void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local,
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_MESH_POINT:
+ case NL80211_IFTYPE_OCB:
break;
default:
WARN_ON_ONCE(1);
diff --git a/net/mac80211/debug.h b/net/mac80211/debug.h
index 493d680..1956b31 100644
--- a/net/mac80211/debug.h
+++ b/net/mac80211/debug.h
@@ -2,6 +2,12 @@
#define __MAC80211_DEBUG_H
#include <net/cfg80211.h>
+#ifdef CONFIG_MAC80211_OCB_DEBUG
+#define MAC80211_OCB_DEBUG 1
+#else
+#define MAC80211_OCB_DEBUG 0
+#endif
+
#ifdef CONFIG_MAC80211_IBSS_DEBUG
#define MAC80211_IBSS_DEBUG 1
#else
@@ -131,6 +137,10 @@ do { \
_sdata_dbg(MAC80211_HT_DEBUG && net_ratelimit(), \
sdata, fmt, ##__VA_ARGS__)
+#define ocb_dbg(sdata, fmt, ...) \
+ _sdata_dbg(MAC80211_OCB_DEBUG, \
+ sdata, fmt, ##__VA_ARGS__)
+
#define ibss_dbg(sdata, fmt, ...) \
_sdata_dbg(MAC80211_IBSS_DEBUG, \
sdata, fmt, ##__VA_ARGS__)
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 3df28e0..4bb96bb 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -214,7 +214,8 @@ static inline void drv_bss_info_changed(struct ieee80211_local *local,
BSS_CHANGED_BEACON_ENABLED) &&
sdata->vif.type != NL80211_IFTYPE_AP &&
sdata->vif.type != NL80211_IFTYPE_ADHOC &&
- sdata->vif.type != NL80211_IFTYPE_MESH_POINT))
+ sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
+ sdata->vif.type != NL80211_IFTYPE_OCB))
return;
if (WARN_ON_ONCE(sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE ||
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index eb42529..fbd6bee 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -577,6 +577,25 @@ struct ieee80211_if_ibss {
};
/**
+ * struct ieee80211_if_ocb - OCB mode state
+ *
+ * @housekeeping_timer: timer for periodic invocation of a housekeeping task
+ * @wrkq_flags: OCB deferred task action
+ * @incomplete_lock: delayed STA insertion lock
+ * @incomplete_stations: list of STAs waiting for delayed insertion
+ * @joined: indication if the interface is connected to an OCB network
+ */
+struct ieee80211_if_ocb {
+ struct timer_list housekeeping_timer;
+ unsigned long wrkq_flags;
+
+ spinlock_t incomplete_lock;
+ struct list_head incomplete_stations;
+
+ bool joined;
+};
+
+/**
* struct ieee80211_mesh_sync_ops - Extensible synchronization framework interface
*
* these declarations define the interface, which enables
@@ -869,6 +888,7 @@ struct ieee80211_sub_if_data {
struct ieee80211_if_managed mgd;
struct ieee80211_if_ibss ibss;
struct ieee80211_if_mesh mesh;
+ struct ieee80211_if_ocb ocb;
u32 mntr_flags;
} u;
@@ -1505,6 +1525,15 @@ int ieee80211_ibss_csa_beacon(struct ieee80211_sub_if_data *sdata,
int ieee80211_ibss_finish_csa(struct ieee80211_sub_if_data *sdata);
void ieee80211_ibss_stop(struct ieee80211_sub_if_data *sdata);
+/* OCB code */
+void ieee80211_ocb_work(struct ieee80211_sub_if_data *sdata);
+void ieee80211_ocb_rx_no_sta(struct ieee80211_sub_if_data *sdata,
+ const u8 *bssid, const u8 *addr, u32 supp_rates);
+void ieee80211_ocb_setup_sdata(struct ieee80211_sub_if_data *sdata);
+int ieee80211_ocb_join(struct ieee80211_sub_if_data *sdata,
+ struct ocb_setup *setup);
+int ieee80211_ocb_leave(struct ieee80211_sub_if_data *sdata);
+
/* mesh code */
void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata);
void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index d69e753..6b631c0 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -259,6 +259,15 @@ static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata,
list_for_each_entry(nsdata, &local->interfaces, list) {
if (nsdata != sdata && ieee80211_sdata_running(nsdata)) {
/*
+ * Only OCB and monitor mode may coexist
+ */
+ if ((sdata->vif.type == NL80211_IFTYPE_OCB &&
+ nsdata->vif.type != NL80211_IFTYPE_MONITOR) ||
+ (sdata->vif.type != NL80211_IFTYPE_MONITOR &&
+ nsdata->vif.type == NL80211_IFTYPE_OCB))
+ return -EBUSY;
+
+ /*
* Allow only a single IBSS interface to be up at any
* time. This is restricted because beacon distribution
* cannot work properly if both are in the same IBSS.
@@ -1283,6 +1292,9 @@ static void ieee80211_iface_work(struct work_struct *work)
break;
ieee80211_mesh_work(sdata);
break;
+ case NL80211_IFTYPE_OCB:
+ ieee80211_ocb_work(sdata);
+ break;
default:
break;
}
@@ -1302,6 +1314,9 @@ static void ieee80211_recalc_smps_work(struct work_struct *work)
static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype type)
{
+ static const u8 bssid_wildcard[ETH_ALEN] = {0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff};
+
/* clear type-dependent union */
memset(&sdata->u, 0, sizeof(sdata->u));
@@ -1354,7 +1369,8 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
ieee80211_sta_setup_sdata(sdata);
break;
case NL80211_IFTYPE_OCB:
- /* to be implemented in the future */
+ sdata->vif.bss_conf.bssid = bssid_wildcard;
+ ieee80211_ocb_setup_sdata(sdata);
break;
case NL80211_IFTYPE_ADHOC:
sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
@@ -1403,6 +1419,7 @@ static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_OCB:
/*
* Could maybe also all others here?
* Just not sure how that interacts
@@ -1418,6 +1435,7 @@ static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_OCB:
/*
* Could probably support everything
* but WDS here (WDS do_open can fail
diff --git a/net/mac80211/ocb.c b/net/mac80211/ocb.c
new file mode 100644
index 0000000..358d5f9
--- /dev/null
+++ b/net/mac80211/ocb.c
@@ -0,0 +1,250 @@
+/*
+ * OCB mode implementation
+ *
+ * Copyright: (c) 2014 Czech Technical University in Prague
+ * (c) 2014 Volkswagen Group Research
+ * Author: Rostislav Lisovy <[email protected]>
+ * Funded by: Volkswagen Group Research
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <net/mac80211.h>
+#include <asm/unaligned.h>
+
+#include "ieee80211_i.h"
+#include "driver-ops.h"
+#include "rate.h"
+
+#define IEEE80211_OCB_HOUSEKEEPING_INTERVAL (60 * HZ)
+#define IEEE80211_OCB_PEER_INACTIVITY_LIMIT (240 * HZ)
+#define IEEE80211_OCB_MAX_STA_ENTRIES 128
+
+/**
+ * enum ocb_deferred_task_flags - mac80211 OCB deferred tasks
+ * @OCB_WORK_HOUSEKEEPING: run the periodic OCB housekeeping tasks
+ *
+ * These flags are used in @wrkq_flags field of &struct ieee80211_if_ocb
+ */
+enum ocb_deferred_task_flags {
+ OCB_WORK_HOUSEKEEPING,
+};
+
+void ieee80211_ocb_rx_no_sta(struct ieee80211_sub_if_data *sdata,
+ const u8 *bssid, const u8 *addr,
+ u32 supp_rates)
+{
+ struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_chanctx_conf *chanctx_conf;
+ struct ieee80211_supported_band *sband;
+ enum nl80211_bss_scan_width scan_width;
+ struct sta_info *sta;
+ int band;
+
+ /* XXX: Consider removing the least recently used entry and
+ * allow new one to be added.
+ */
+ if (local->num_sta >= IEEE80211_OCB_MAX_STA_ENTRIES) {
+ net_info_ratelimited("%s: No room for a new OCB STA entry %pM\n",
+ sdata->name, addr);
+ return;
+ }
+
+ ocb_dbg(sdata, "Adding new OCB station %pM\n", addr);
+
+ rcu_read_lock();
+ chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+ if (WARN_ON_ONCE(!chanctx_conf)) {
+ rcu_read_unlock();
+ return;
+ }
+ band = chanctx_conf->def.chan->band;
+ scan_width = cfg80211_chandef_to_scan_width(&chanctx_conf->def);
+ rcu_read_unlock();
+
+ sta = sta_info_alloc(sdata, addr, GFP_ATOMIC);
+ if (!sta)
+ return;
+
+ sta->last_rx = jiffies;
+
+ /* Add only mandatory rates for now */
+ sband = local->hw.wiphy->bands[band];
+ sta->sta.supp_rates[band] =
+ ieee80211_mandatory_rates(sband, scan_width);
+
+ spin_lock(&ifocb->incomplete_lock);
+ list_add(&sta->list, &ifocb->incomplete_stations);
+ spin_unlock(&ifocb->incomplete_lock);
+ ieee80211_queue_work(&local->hw, &sdata->work);
+}
+
+static struct sta_info *ieee80211_ocb_finish_sta(struct sta_info *sta)
+ __acquires(RCU)
+{
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ u8 addr[ETH_ALEN];
+
+ memcpy(addr, sta->sta.addr, ETH_ALEN);
+
+ ocb_dbg(sdata, "Adding new IBSS station %pM (dev=%s)\n",
+ addr, sdata->name);
+
+ sta_info_move_state(sta, IEEE80211_STA_AUTH);
+ sta_info_move_state(sta, IEEE80211_STA_ASSOC);
+ sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
+
+ rate_control_rate_init(sta);
+
+ /* If it fails, maybe we raced another insertion? */
+ if (sta_info_insert_rcu(sta))
+ return sta_info_get(sdata, addr);
+ return sta;
+}
+
+static void ieee80211_ocb_housekeeping(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
+
+ ocb_dbg(sdata, "Running ocb housekeeping\n");
+
+ ieee80211_sta_expire(sdata, IEEE80211_OCB_PEER_INACTIVITY_LIMIT);
+
+ mod_timer(&ifocb->housekeeping_timer,
+ round_jiffies(jiffies + IEEE80211_OCB_HOUSEKEEPING_INTERVAL));
+}
+
+void ieee80211_ocb_work(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
+ struct sta_info *sta;
+
+ if (ifocb->joined != true)
+ return;
+
+ sdata_lock(sdata);
+
+ spin_lock_bh(&ifocb->incomplete_lock);
+ while (!list_empty(&ifocb->incomplete_stations)) {
+ sta = list_first_entry(&ifocb->incomplete_stations,
+ struct sta_info, list);
+ list_del(&sta->list);
+ spin_unlock_bh(&ifocb->incomplete_lock);
+
+ ieee80211_ocb_finish_sta(sta);
+ rcu_read_unlock();
+ spin_lock_bh(&ifocb->incomplete_lock);
+ }
+ spin_unlock_bh(&ifocb->incomplete_lock);
+
+ if (test_and_clear_bit(OCB_WORK_HOUSEKEEPING, &ifocb->wrkq_flags))
+ ieee80211_ocb_housekeeping(sdata);
+
+ sdata_unlock(sdata);
+}
+
+static void ieee80211_ocb_housekeeping_timer(unsigned long data)
+{
+ struct ieee80211_sub_if_data *sdata = (void *)data;
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
+
+ set_bit(OCB_WORK_HOUSEKEEPING, &ifocb->wrkq_flags);
+
+ ieee80211_queue_work(&local->hw, &sdata->work);
+}
+
+void ieee80211_ocb_setup_sdata(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
+
+ setup_timer(&ifocb->housekeeping_timer,
+ ieee80211_ocb_housekeeping_timer,
+ (unsigned long)sdata);
+ INIT_LIST_HEAD(&ifocb->incomplete_stations);
+ spin_lock_init(&ifocb->incomplete_lock);
+}
+
+int ieee80211_ocb_join(struct ieee80211_sub_if_data *sdata,
+ struct ocb_setup *setup)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
+ u32 changed = BSS_CHANGED_OCB;
+ int err;
+
+ if (ifocb->joined == true)
+ return -EINVAL;
+
+ sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
+ sdata->smps_mode = IEEE80211_SMPS_OFF;
+ sdata->needed_rx_chains = sdata->local->rx_chains;
+
+ mutex_lock(&sdata->local->mtx);
+ err = ieee80211_vif_use_channel(sdata, &setup->chandef,
+ IEEE80211_CHANCTX_SHARED);
+ mutex_unlock(&sdata->local->mtx);
+ if (err)
+ return err;
+
+ ieee80211_bss_info_change_notify(sdata, changed);
+
+ ifocb->joined = true;
+
+ set_bit(OCB_WORK_HOUSEKEEPING, &ifocb->wrkq_flags);
+ ieee80211_queue_work(&local->hw, &sdata->work);
+
+ netif_carrier_on(sdata->dev);
+ return 0;
+}
+
+int ieee80211_ocb_leave(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
+ struct ieee80211_local *local = sdata->local;
+ struct sta_info *sta;
+
+ ifocb->joined = false;
+ sta_info_flush(sdata);
+
+ spin_lock_bh(&ifocb->incomplete_lock);
+ while (!list_empty(&ifocb->incomplete_stations)) {
+ sta = list_first_entry(&ifocb->incomplete_stations,
+ struct sta_info, list);
+ list_del(&sta->list);
+ spin_unlock_bh(&ifocb->incomplete_lock);
+
+ sta_info_free(local, sta);
+ spin_lock_bh(&ifocb->incomplete_lock);
+ }
+ spin_unlock_bh(&ifocb->incomplete_lock);
+
+ netif_carrier_off(sdata->dev);
+ clear_bit(SDATA_STATE_OFFCHANNEL, &sdata->state);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_OCB);
+
+ mutex_lock(&sdata->local->mtx);
+ ieee80211_vif_release_channel(sdata);
+ mutex_unlock(&sdata->local->mtx);
+
+ skb_queue_purge(&sdata->skb_queue);
+
+ del_timer_sync(&sdata->u.ocb.housekeeping_timer);
+ /* If the timer fired while we waited for it, it will have
+ * requeued the work. Now the work will be running again
+ * but will not rearm the timer again because it checks
+ * whether we are connected to the network or not -- at this
+ * point we shouldn't be anymore.
+ */
+
+ return 0;
+}
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index b04ca40..bc63aa0 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1032,6 +1032,7 @@ ieee80211_rx_h_check(struct ieee80211_rx_data *rx)
ieee80211_is_pspoll(hdr->frame_control)) &&
rx->sdata->vif.type != NL80211_IFTYPE_ADHOC &&
rx->sdata->vif.type != NL80211_IFTYPE_WDS &&
+ rx->sdata->vif.type != NL80211_IFTYPE_OCB &&
(!rx->sta || !test_sta_flag(rx->sta, WLAN_STA_ASSOC)))) {
/*
* accept port control frames from the AP even when it's not
@@ -1272,6 +1273,12 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx)
sta->last_rx_rate_vht_nss = status->vht_nss;
}
}
+ } else if (rx->sdata->vif.type == NL80211_IFTYPE_OCB) {
+ u8 *bssid = ieee80211_get_bssid(hdr, rx->skb->len,
+ NL80211_IFTYPE_OCB);
+ /* OCB uses wild-card BSSID */
+ if (is_broadcast_ether_addr(bssid))
+ sta->last_rx = jiffies;
} else if (!is_multicast_ether_addr(hdr->addr1)) {
/*
* Mesh beacons will update last_rx when if they are found to
@@ -2820,6 +2827,7 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx)
if (!ieee80211_vif_is_mesh(&sdata->vif) &&
sdata->vif.type != NL80211_IFTYPE_ADHOC &&
+ sdata->vif.type != NL80211_IFTYPE_OCB &&
sdata->vif.type != NL80211_IFTYPE_STATION)
return RX_DROP_MONITOR;
@@ -3130,6 +3138,33 @@ static bool prepare_for_handlers(struct ieee80211_rx_data *rx,
BIT(rate_idx));
}
break;
+ case NL80211_IFTYPE_OCB:
+ if (!bssid)
+ return false;
+ if (ieee80211_is_beacon(hdr->frame_control)) {
+ return false;
+ } else if (!is_broadcast_ether_addr(bssid)) {
+ ocb_dbg(sdata, "BSSID mismatch in OCB mode!\n");
+ return false;
+ } else if (!multicast &&
+ !ether_addr_equal(sdata->dev->dev_addr,
+ hdr->addr1)) {
+ /* if we are in promisc mode we also accept
+ * packets not destined for us
+ */
+ if (!(sdata->dev->flags & IFF_PROMISC))
+ return false;
+ rx->flags &= ~IEEE80211_RX_RA_MATCH;
+ } else if (!rx->sta) {
+ int rate_idx;
+ if (status->flag & RX_FLAG_HT)
+ rate_idx = 0; /* TODO: HT rates */
+ else
+ rate_idx = status->rate_idx;
+ ieee80211_ocb_rx_no_sta(sdata, bssid, hdr->addr2,
+ BIT(rate_idx));
+ }
+ break;
case NL80211_IFTYPE_MESH_POINT:
if (!multicast &&
!ether_addr_equal(sdata->vif.addr, hdr->addr1)) {
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 900632a2..3ffd91f 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -296,6 +296,9 @@ ieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx)
*/
return TX_DROP;
+ if (tx->sdata->vif.type == NL80211_IFTYPE_OCB)
+ return TX_CONTINUE;
+
if (tx->sdata->vif.type == NL80211_IFTYPE_WDS)
return TX_CONTINUE;
@@ -2013,6 +2016,17 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
goto fail_rcu;
band = chanctx_conf->def.chan->band;
break;
+ case NL80211_IFTYPE_OCB:
+ /* DA SA BSSID */
+ memcpy(hdr.addr1, skb->data, ETH_ALEN);
+ memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
+ eth_broadcast_addr(hdr.addr3);
+ hdrlen = 24;
+ chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+ if (!chanctx_conf)
+ goto fail_rcu;
+ band = chanctx_conf->def.chan->band;
+ break;
case NL80211_IFTYPE_ADHOC:
/* DA SA BSSID */
memcpy(hdr.addr1, skb->data, ETH_ALEN);
@@ -2057,6 +2071,7 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
* EAPOL frames from the local station.
*/
if (unlikely(!ieee80211_vif_is_mesh(&sdata->vif) &&
+ (sdata->vif.type != NL80211_IFTYPE_OCB) &&
!multicast && !authorized &&
(cpu_to_be16(ethertype) != sdata->control_port_protocol ||
!ether_addr_equal(sdata->vif.addr, skb->data + ETH_ALEN)))) {
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index d7d69c8..91e16b4 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1101,6 +1101,7 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata,
struct ieee80211_chanctx_conf *chanctx_conf;
int ac;
bool use_11b, enable_qos;
+ bool is_ocb; /* Use another EDCA parameters if dot11OCBActivated=true */
int aCWmin, aCWmax;
if (!local->ops->conf_tx)
@@ -1125,6 +1126,8 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata,
*/
enable_qos = (sdata->vif.type != NL80211_IFTYPE_STATION);
+ is_ocb = (sdata->vif.type == NL80211_IFTYPE_OCB);
+
/* Set defaults according to 802.11-2007 Table 7-37 */
aCWmax = 1023;
if (use_11b)
@@ -1146,7 +1149,10 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata,
qparam.cw_max = aCWmax;
qparam.cw_min = aCWmin;
qparam.txop = 0;
- qparam.aifs = 7;
+ if (is_ocb)
+ qparam.aifs = 9;
+ else
+ qparam.aifs = 7;
break;
/* never happens but let's not leave undefined */
default:
@@ -1154,21 +1160,32 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata,
qparam.cw_max = aCWmax;
qparam.cw_min = aCWmin;
qparam.txop = 0;
- qparam.aifs = 3;
+ if (is_ocb)
+ qparam.aifs = 6;
+ else
+ qparam.aifs = 3;
break;
case IEEE80211_AC_VI:
qparam.cw_max = aCWmin;
qparam.cw_min = (aCWmin + 1) / 2 - 1;
- if (use_11b)
+ if (is_ocb)
+ qparam.txop = 0;
+ else if (use_11b)
qparam.txop = 6016/32;
else
qparam.txop = 3008/32;
- qparam.aifs = 2;
+
+ if (is_ocb)
+ qparam.aifs = 3;
+ else
+ qparam.aifs = 2;
break;
case IEEE80211_AC_VO:
qparam.cw_max = (aCWmin + 1) / 2 - 1;
qparam.cw_min = (aCWmin + 1) / 4 - 1;
- if (use_11b)
+ if (is_ocb)
+ qparam.txop = 0;
+ else if (use_11b)
qparam.txop = 3264/32;
else
qparam.txop = 1504/32;
@@ -1842,7 +1859,8 @@ int ieee80211_reconfig(struct ieee80211_local *local)
sdata_unlock(sdata);
break;
case NL80211_IFTYPE_OCB:
- /* to be implemented in the future */
+ changed |= BSS_CHANGED_OCB;
+ ieee80211_bss_info_change_notify(sdata, changed);
break;
case NL80211_IFTYPE_ADHOC:
changed |= BSS_CHANGED_IBSS;
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index d3c5672..fdf52db 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -148,6 +148,10 @@ u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
case NL80211_IFTYPE_ADHOC:
ra = skb->data;
break;
+ case NL80211_IFTYPE_OCB:
+ /* all stations are required to support WME */
+ qos = true;
+ break;
default:
break;
}
--
2.0.0.rc4
This patch adds new iface type (NL80211_IFTYPE_OCB) representing
the OCB (Outside the Context of a BSS) mode.
When establishing a connection to the network a cfg80211_join_ocb
function is called (particular nl80211_command is added as well).
A mandatory parameters during the ocb_join operation are 'center
frequency' and 'channel width (5/10 MHz)'.
Changes done in mac80211 are minimal possible required to avoid
many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB'
not handled in switch) during compilation. Full functionality
(where needed) is added in the following patch.
Signed-off-by: Rostislav Lisovy <[email protected]>
---
include/net/cfg80211.h | 14 +++++++
include/uapi/linux/nl80211.h | 11 ++++++
net/mac80211/cfg.c | 1 +
net/mac80211/chan.c | 2 +
net/mac80211/iface.c | 5 +++
net/mac80211/util.c | 3 ++
net/wireless/Makefile | 2 +-
net/wireless/chan.c | 8 ++++
net/wireless/core.c | 3 ++
net/wireless/core.h | 12 ++++++
net/wireless/nl80211.c | 39 ++++++++++++++++++++
net/wireless/ocb.c | 88 ++++++++++++++++++++++++++++++++++++++++++++
net/wireless/rdev-ops.h | 21 +++++++++++
net/wireless/trace.h | 21 +++++++++++
net/wireless/util.c | 5 ++-
15 files changed, 233 insertions(+), 2 deletions(-)
create mode 100644 net/wireless/ocb.c
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index f67948e..490b3d8 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1359,6 +1359,16 @@ struct mesh_setup {
};
/**
+ * struct ocb_setup - 802.11p OCB mode setup configuration
+ * @chandef: defines the channel to use
+ *
+ * These parameters are fixed when connecting to the network
+ */
+struct ocb_setup {
+ struct cfg80211_chan_def chandef;
+};
+
+/**
* struct ieee80211_txq_params - TX queue parameters
* @ac: AC identifier
* @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
@@ -2433,6 +2443,10 @@ struct cfg80211_ops {
const struct mesh_setup *setup);
int (*leave_mesh)(struct wiphy *wiphy, struct net_device *dev);
+ int (*join_ocb)(struct wiphy *wiphy, struct net_device *dev,
+ struct ocb_setup *setup);
+ int (*leave_ocb)(struct wiphy *wiphy, struct net_device *dev);
+
int (*change_bss)(struct wiphy *wiphy, struct net_device *dev,
struct bss_parameters *params);
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index f7daae5..9b3025e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -746,6 +746,11 @@
* destination %NL80211_ATTR_MAC on the interface identified by
* %NL80211_ATTR_IFINDEX.
*
+ * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and
+ * bandwidth of a channel must be given.
+ * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
+ * network is determined by the network interface.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -922,6 +927,9 @@ enum nl80211_commands {
NL80211_CMD_GET_MPP,
+ NL80211_CMD_JOIN_OCB,
+ NL80211_CMD_LEAVE_OCB,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -2074,6 +2082,8 @@ enum nl80211_attrs {
* and therefore can't be created in the normal ways, use the
* %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
* commands to create and destroy one
+ * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
+ * This mode corresponds to the MIB variable dot11OCBActivated=true
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
* @NUM_NL80211_IFTYPES: number of defined interface types
*
@@ -2093,6 +2103,7 @@ enum nl80211_iftype {
NL80211_IFTYPE_P2P_CLIENT,
NL80211_IFTYPE_P2P_GO,
NL80211_IFTYPE_P2P_DEVICE,
+ NL80211_IFTYPE_OCB,
/* keep last */
NUM_NL80211_IFTYPES,
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index fbcc209..643a10a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -230,6 +230,7 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
case NUM_NL80211_IFTYPES:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_P2P_GO:
+ case NL80211_IFTYPE_OCB:
/* shouldn't happen */
WARN_ON_ONCE(1);
break;
diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index ee71bb6..ff1f877 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -270,6 +270,7 @@ ieee80211_get_chanctx_max_required_bw(struct ieee80211_local *local,
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_MESH_POINT:
+ case NL80211_IFTYPE_OCB:
width = vif->bss_conf.chandef.width;
break;
case NL80211_IFTYPE_UNSPECIFIED:
@@ -909,6 +910,7 @@ ieee80211_vif_chanctx_reservation_complete(struct ieee80211_sub_if_data *sdata)
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
+ case NL80211_IFTYPE_OCB:
ieee80211_queue_work(&sdata->local->hw,
&sdata->csa_finalize_work);
break;
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 1ffcc07..d69e753 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -521,6 +521,7 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_P2P_DEVICE:
+ case NL80211_IFTYPE_OCB:
/* no special treatment */
break;
case NL80211_IFTYPE_UNSPECIFIED:
@@ -631,6 +632,7 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
+ case NL80211_IFTYPE_OCB:
netif_carrier_off(dev);
break;
case NL80211_IFTYPE_WDS:
@@ -1351,6 +1353,9 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid;
ieee80211_sta_setup_sdata(sdata);
break;
+ case NL80211_IFTYPE_OCB:
+ /* to be implemented in the future */
+ break;
case NL80211_IFTYPE_ADHOC:
sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
ieee80211_ibss_setup_sdata(sdata);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 666aa13..d7d69c8 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1841,6 +1841,9 @@ int ieee80211_reconfig(struct ieee80211_local *local)
ieee80211_bss_info_change_notify(sdata, changed);
sdata_unlock(sdata);
break;
+ case NL80211_IFTYPE_OCB:
+ /* to be implemented in the future */
+ break;
case NL80211_IFTYPE_ADHOC:
changed |= BSS_CHANGED_IBSS;
/* fall through */
diff --git a/net/wireless/Makefile b/net/wireless/Makefile
index a761670..4c9e39f 100644
--- a/net/wireless/Makefile
+++ b/net/wireless/Makefile
@@ -10,7 +10,7 @@ obj-$(CONFIG_WEXT_SPY) += wext-spy.o
obj-$(CONFIG_WEXT_PRIV) += wext-priv.o
cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o
-cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o ap.o trace.o
+cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o ap.o trace.o ocb.o
cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o
cfg80211-$(CONFIG_CFG80211_WEXT) += wext-compat.o wext-sme.o
cfg80211-$(CONFIG_CFG80211_INTERNAL_REGDB) += regdb.o
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index 8f39e33..85506f1d 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -366,6 +366,7 @@ int cfg80211_chandef_dfs_required(struct wiphy *wiphy,
break;
case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_OCB:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_AP_VLAN:
@@ -892,6 +893,13 @@ cfg80211_get_chan_state(struct wireless_dev *wdev,
*radar_detect |= BIT(wdev->chandef.width);
}
return;
+ case NL80211_IFTYPE_OCB:
+ if (wdev->chandef.chan) {
+ *chan = wdev->chandef.chan;
+ *chanmode = CHAN_MODE_SHARED;
+ return;
+ }
+ break;
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_WDS:
diff --git a/net/wireless/core.c b/net/wireless/core.c
index da4dcb6..a4d2792 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -869,6 +869,9 @@ void __cfg80211_leave(struct cfg80211_registered_device *rdev,
case NL80211_IFTYPE_P2P_GO:
__cfg80211_stop_ap(rdev, dev, true);
break;
+ case NL80211_IFTYPE_OCB:
+ __cfg80211_leave_ocb(rdev, dev);
+ break;
case NL80211_IFTYPE_WDS:
/* must be handled by mac80211/driver, has no APIs */
break;
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 7e3a3ce..61ee664 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -290,6 +290,18 @@ int cfg80211_set_mesh_channel(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev,
struct cfg80211_chan_def *chandef);
+/* OCB */
+int __cfg80211_join_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ocb_setup *setup);
+int cfg80211_join_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ocb_setup *setup);
+int __cfg80211_leave_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev);
+int cfg80211_leave_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev);
+
/* AP */
int __cfg80211_stop_ap(struct cfg80211_registered_device *rdev,
struct net_device *dev, bool notify);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index f7d9188..1a31736 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -885,6 +885,7 @@ static int nl80211_key_allowed(struct wireless_dev *wdev)
return -ENOLINK;
break;
case NL80211_IFTYPE_UNSPECIFIED:
+ case NL80211_IFTYPE_OCB:
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_P2P_DEVICE:
case NL80211_IFTYPE_WDS:
@@ -8275,6 +8276,28 @@ static int nl80211_set_cqm(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
}
+static int nl80211_join_ocb(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ struct ocb_setup setup = {};
+ int err;
+
+ err = nl80211_parse_chandef(rdev, info, &setup.chandef);
+ if (err)
+ return err;
+
+ return cfg80211_join_ocb(rdev, dev, &setup);
+}
+
+static int nl80211_leave_ocb(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+
+ return cfg80211_leave_ocb(rdev, dev);
+}
+
static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -10218,6 +10241,22 @@ static const struct genl_ops nl80211_ops[] = {
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_JOIN_OCB,
+ .doit = nl80211_join_ocb,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
+ {
+ .cmd = NL80211_CMD_LEAVE_OCB,
+ .doit = nl80211_leave_ocb,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
#ifdef CONFIG_PM
{
.cmd = NL80211_CMD_GET_WOWLAN,
diff --git a/net/wireless/ocb.c b/net/wireless/ocb.c
new file mode 100644
index 0000000..c00d4a7
--- /dev/null
+++ b/net/wireless/ocb.c
@@ -0,0 +1,88 @@
+/*
+ * OCB mode implementation
+ *
+ * Copyright: (c) 2014 Czech Technical University in Prague
+ * (c) 2014 Volkswagen Group Research
+ * Author: Rostislav Lisovy <[email protected]>
+ * Funded by: Volkswagen Group Research
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
+#include "nl80211.h"
+#include "core.h"
+#include "rdev-ops.h"
+
+int __cfg80211_join_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ocb_setup *setup)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_OCB)
+ return -EOPNOTSUPP;
+
+ if (WARN_ON(!setup->chandef.chan))
+ return -EINVAL;
+
+ err = rdev_join_ocb(rdev, dev, setup);
+ if (!err)
+ wdev->chandef = setup->chandef;
+
+ return err;
+}
+
+int cfg80211_join_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ocb_setup *setup)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ wdev_lock(wdev);
+ err = __cfg80211_join_ocb(rdev, dev, setup);
+ wdev_unlock(wdev);
+
+ return err;
+}
+
+int __cfg80211_leave_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_OCB)
+ return -EOPNOTSUPP;
+
+ if (!rdev->ops->leave_ocb)
+ return -EOPNOTSUPP;
+
+ err = rdev_leave_ocb(rdev, dev);
+ if (!err)
+ memset(&wdev->chandef, 0, sizeof(wdev->chandef));
+
+ return err;
+}
+
+int cfg80211_leave_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ wdev_lock(wdev);
+ err = __cfg80211_leave_ocb(rdev, dev);
+ wdev_unlock(wdev);
+
+ return err;
+}
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index 71b1db3..1b3864c 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -348,6 +348,27 @@ static inline int rdev_leave_mesh(struct cfg80211_registered_device *rdev,
return ret;
}
+static inline int rdev_join_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ocb_setup *setup)
+{
+ int ret;
+ trace_rdev_join_ocb(&rdev->wiphy, dev, setup);
+ ret = rdev->ops->join_ocb(&rdev->wiphy, dev, setup);
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
+
+static inline int rdev_leave_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev)
+{
+ int ret;
+ trace_rdev_leave_ocb(&rdev->wiphy, dev);
+ ret = rdev->ops->leave_ocb(&rdev->wiphy, dev);
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
+
static inline int rdev_change_bss(struct cfg80211_registered_device *rdev,
struct net_device *dev,
struct bss_parameters *params)
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index cdb2c2e..277a85d 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -600,6 +600,11 @@ DEFINE_EVENT(wiphy_netdev_evt, rdev_leave_ibss,
TP_ARGS(wiphy, netdev)
);
+DEFINE_EVENT(wiphy_netdev_evt, rdev_leave_ocb,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev),
+ TP_ARGS(wiphy, netdev)
+);
+
DEFINE_EVENT(wiphy_netdev_evt, rdev_flush_pmksa,
TP_PROTO(struct wiphy *wiphy, struct net_device *netdev),
TP_ARGS(wiphy, netdev)
@@ -1316,6 +1321,22 @@ TRACE_EVENT(rdev_join_ibss,
WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(bssid), __entry->ssid)
);
+TRACE_EVENT(rdev_join_ocb,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
+ const struct ocb_setup *setup),
+ TP_ARGS(wiphy, netdev, setup),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ NETDEV_ENTRY
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
+ ),
+ TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT,
+ WIPHY_PR_ARG, NETDEV_PR_ARG)
+);
+
TRACE_EVENT(rdev_set_wiphy_params,
TP_PROTO(struct wiphy *wiphy, u32 changed),
TP_ARGS(wiphy, changed),
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 5e233a5..d0ac795 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -442,7 +442,8 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
break;
case cpu_to_le16(0):
if (iftype != NL80211_IFTYPE_ADHOC &&
- iftype != NL80211_IFTYPE_STATION)
+ iftype != NL80211_IFTYPE_STATION &&
+ iftype != NL80211_IFTYPE_OCB)
return -1;
break;
}
@@ -519,6 +520,7 @@ int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
memcpy(hdr.addr3, skb->data, ETH_ALEN);
hdrlen = 24;
break;
+ case NL80211_IFTYPE_OCB:
case NL80211_IFTYPE_ADHOC:
/* DA SA BSSID */
memcpy(hdr.addr1, skb->data, ETH_ALEN);
@@ -937,6 +939,7 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
if (dev->ieee80211_ptr->use_4addr)
break;
/* fall through */
+ case NL80211_IFTYPE_OCB:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_ADHOC:
dev->priv_flags |= IFF_DONT_BRIDGE;
--
2.0.0.rc4
On Mon, 2014-11-03 at 10:33 +0100, Rostislav Lisovy wrote:
> The IEEE 802.11p amendment (already part of IEEE 802.11-2012)
> specifies usage of 5 and 10 MHz wide channels in 5.9GHz band for
> vehicular environment. All the 802.11p compliant devices should
> be set to the newly added operation mode -- OCB (Outside the
> Context of a BSS). No authentication/association is necessary to
> communicate. The only parameter to be configured is the channel
> (central frequency and bandwidth) to communicate on. The channel
> has to be known a priori. It is set during the 'ocb join'
> operation (sent via netlink message from user-space).
>
> This patchset adds the OCB mode, OCB join and leave handling
> (nl80211, cfg80211, mac80211), 802.11p EDCA parameters
> modification, RX and TX path (for unicast/broadcast messages).
Applied, thanks for all the changes.
johannes
On Tue, 2014-11-04 at 10:25 +0100, Johannes Berg wrote:
> On Mon, 2014-11-03 at 10:33 +0100, Rostislav Lisovy wrote:
> > The IEEE 802.11p amendment (already part of IEEE 802.11-2012)
> > specifies usage of 5 and 10 MHz wide channels in 5.9GHz band for
> > vehicular environment. All the 802.11p compliant devices should
> > be set to the newly added operation mode -- OCB (Outside the
> > Context of a BSS). No authentication/association is necessary to
> > communicate. The only parameter to be configured is the channel
> > (central frequency and bandwidth) to communicate on. The channel
> > has to be known a priori. It is set during the 'ocb join'
> > operation (sent via netlink message from user-space).
> >
> > This patchset adds the OCB mode, OCB join and leave handling
> > (nl80211, cfg80211, mac80211), 802.11p EDCA parameters
> > modification, RX and TX path (for unicast/broadcast messages).
>
> Applied, thanks for all the changes.
Johannes, thank you for your help.
What do you think should be the next step? Until the new nl80211.h is
not in the 'iw' I will send some patches to the Atheros mailinglist
(adding OCB mode handling). Thereafter I will send patches for the 'iw'?
Best regards;
Rostislav