Your commit 4bf7753b8ab7 ("ARM: at91: remove at91sam9g45/9m10 legacy
board support") landed in today's linux-next (ie, next-20141110). It
removed the Kconfig symbol ARCH_AT91SAM9G45.
There are still two checks for CONFIG_ARCH_AT91SAM9G45 in next-20141110
(one in arch/arm/mach-at91/Makefile.boot and one in
arch/arm/mach-at91/board.h). Are one or more patches to remove these
checks queued somewhere?
Paul Bolle
The CONFIG_ARCH_AT91SAM9G45 config option was removed by ("ARM: at91: remove
at91sam9g45/9m10 legacy board support") so cleanup the use of it.
Reported-by: Paul Bolle <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
---
arch/arm/mach-at91/Makefile.boot | 6 ------
arch/arm/mach-at91/board.h | 4 ----
2 files changed, 10 deletions(-)
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 5309f9b6aabc..29ed0fa374ca 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -3,12 +3,6 @@
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
-ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
- zreladdr-y += 0x70008000
-params_phys-y := 0x70000100
-initrd_phys-y := 0x70410000
-else
zreladdr-y += 0x20008000
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
-endif
diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h
index 836e9a537e0c..d268ec3781dd 100644
--- a/arch/arm/mach-at91/board.h
+++ b/arch/arm/mach-at91/board.h
@@ -56,11 +56,7 @@ extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
extern void __init at91_add_device_nand(struct atmel_nand_data *data);
/* I2C*/
-#if defined(CONFIG_ARCH_AT91SAM9G45)
-extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
-#else
extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
-#endif
/* SPI */
extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
--
1.8.2.2
On Thu, 13 Nov 2014 10:33:10 +0100
Nicolas Ferre <[email protected]> wrote:
> The CONFIG_ARCH_AT91SAM9G45 config option was removed by ("ARM: at91: remove
> at91sam9g45/9m10 legacy board support") so cleanup the use of it.
>
> Reported-by: Paul Bolle <[email protected]>
> Signed-off-by: Nicolas Ferre <[email protected]>
Acked-by: Boris Brezillon <[email protected]>
> ---
> arch/arm/mach-at91/Makefile.boot | 6 ------
> arch/arm/mach-at91/board.h | 4 ----
> 2 files changed, 10 deletions(-)
>
> diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
> index 5309f9b6aabc..29ed0fa374ca 100644
> --- a/arch/arm/mach-at91/Makefile.boot
> +++ b/arch/arm/mach-at91/Makefile.boot
> @@ -3,12 +3,6 @@
> # PARAMS_PHYS must be within 4MB of ZRELADDR
> # INITRD_PHYS must be in RAM
>
> -ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
> - zreladdr-y += 0x70008000
> -params_phys-y := 0x70000100
> -initrd_phys-y := 0x70410000
> -else
> zreladdr-y += 0x20008000
> params_phys-y := 0x20000100
> initrd_phys-y := 0x20410000
> -endif
> diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h
> index 836e9a537e0c..d268ec3781dd 100644
> --- a/arch/arm/mach-at91/board.h
> +++ b/arch/arm/mach-at91/board.h
> @@ -56,11 +56,7 @@ extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
> extern void __init at91_add_device_nand(struct atmel_nand_data *data);
>
> /* I2C*/
> -#if defined(CONFIG_ARCH_AT91SAM9G45)
> -extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
> -#else
> extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
> -#endif
>
> /* SPI */
> extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com