Hi,
this is the third version of the pinctrl driver for Amlogic Meson. It
provides a common infrastructure than can be used by all the SoCs of
the family and configuration data specific for Meson8. Adding support
for other SoCs should be only matter of defining new pins and banks.
The driver uses generic DT properties for the definition of mux and
configuration nodes; since there is an ongoing effort to centralize
the parsing to generic code, I've reused the patch "pinctrl:
pinconf-generic: Infer map type from DT property" [1] posted a few
days ago by Soren Brinkmann. I will update the series if that patch is
going to change after the mailing list discussion.
[1] https://lkml.org/lkml/2014/11/3/704
Changes since v2 [ https://lkml.org/lkml/2014/10/14/423 ]
- move modifications to mach-meson Kconfig to a separate patch
- use regmap_mmio
- use generic gpio xlate function
- don't hardcode gpio base number
- use gpiochip_add_pin_range()
- add kerneldoc documentation
- use plain module_platform_driver() instead of postcore_initcall
- avoid unneeded copies of platform data
Changes since v1 [ https://lkml.org/lkml/2014/10/7/712 ]
- added missing checks of return values
- indentation fixes
- added missing definitions of groups and functions for Meson8
Beniamino Galvani (3):
pinctrl: meson: add device tree bindings documentation
pinctrl: add driver for Amlogic Meson SoCs
ARM: meson: select PINCTRL_MESON and ARCH_REQUIRE_GPIOLIB
.../devicetree/bindings/pinctrl/meson,pinctrl.txt | 97 ++
arch/arm/mach-meson/Kconfig | 3 +
drivers/pinctrl/Kconfig | 8 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/meson/Makefile | 2 +
drivers/pinctrl/meson/pinctrl-meson.c | 761 ++++++++++++++
drivers/pinctrl/meson/pinctrl-meson.h | 209 ++++
drivers/pinctrl/meson/pinctrl-meson8.c | 1087 ++++++++++++++++++++
include/dt-bindings/gpio/meson8-gpio.h | 157 +++
9 files changed, 2325 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
create mode 100644 drivers/pinctrl/meson/Makefile
create mode 100644 drivers/pinctrl/meson/pinctrl-meson.c
create mode 100644 drivers/pinctrl/meson/pinctrl-meson.h
create mode 100644 drivers/pinctrl/meson/pinctrl-meson8.c
create mode 100644 include/dt-bindings/gpio/meson8-gpio.h
--
1.9.1
Add device tree bindings documentation for Amlogic Meson pin and GPIO
controller.
Signed-off-by: Beniamino Galvani <[email protected]>
---
.../devicetree/bindings/pinctrl/meson,pinctrl.txt | 97 ++++++++++++++++++++++
1 file changed, 97 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
new file mode 100644
index 0000000..9edd1ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -0,0 +1,97 @@
+== Amlogic Meson pinmux controller ==
+
+Required properties for the root node:
+ - compatible: "amlogic,meson8-pinctrl"
+ - reg: address and size of registers controlling irq functionality
+
+=== GPIO sub-nodes ===
+
+The 2 power domains of the controller (regular and always-on) are
+represented as sub-nodes and each of them acts as a GPIO controller.
+
+Required properties for sub-nodes are:
+ - reg: should contain address and size for mux, pull-enable, pull and
+ gpio register sets
+ - reg-names: an array of strings describing the "reg" entries. Must
+ contain "mux", "pull" and "gpio". "pull-enable" is optional and
+ when it is missing the "pull" registers are used instead
+ - gpio-controller: identifies the node as a gpio controller
+ - #gpio-cells: must be 2
+
+Valid sub-node names are:
+ - "banks" for the regular domain
+ - "ao-bank" for the always-on domain
+
+=== Other sub-nodes ===
+
+Child nodes without the "gpio-controller" represent some desired
+configuration for a pin or a group. Those nodes can be pinmux nodes or
+configuration nodes.
+
+Required properties for pinmux nodes are:
+ - groups: a list of pinmux groups. The list of all available groups
+ depends on the SoC and can be found in driver sources.
+ - function: the name of a function to activate for the specified set
+ of groups. The list of all available functions depends on the SoC
+ and can be found in driver sources.
+
+Required properties for configuration nodes:
+ - pins: a list of pin names
+
+Configuration nodes support the generic properties "bias-disable",
+"bias-pull-up" and "bias-pull-down", described in file
+pinctrl-bindings.txt
+
+=== Example ===
+
+ pinctrl: pinctrl@c1109880 {
+ compatible = "amlogic,meson8-pinctrl";
+ reg = <0xc1109880 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio: banks@c11080b0 {
+ reg = <0xc11080b0 0x28>,
+ <0xc11080e8 0x18>,
+ <0xc1108120 0x18>,
+ <0xc1108030 0x30>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_ao: ao-bank@c1108030 {
+ reg = <0xc8100014 0x4>,
+ <0xc810002c 0x4>,
+ <0xc8100024 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ nand {
+ mux {
+ groups = "nand_io", "nand_io_ce0", "nand_io_ce1",
+ "nand_io_rb0", "nand_ale", "nand_cle",
+ "nand_wen_clk", "nand_ren_clk", "nand_dqs",
+ "nand_ce2", "nand_ce3";
+ function = "nand";
+ };
+ };
+
+ uart_ao_a {
+ mux {
+ groups = "uart_tx_ao_a", "uart_rx_ao_a",
+ "uart_cts_ao_a", "uart_rts_ao_a";
+ function = "uart_ao";
+ };
+
+ conf {
+ pins = "GPIOAO_0", "GPIOAO_1",
+ "GPIOAO_2", "GPIOAO_3";
+ bias-disable;
+ };
+ };
+ };
+
--
1.9.1
This is a driver for the pinmux and GPIO controller available in
Amlogic Meson SoCs. At the moment it only supports Meson8 devices,
however other SoC families like Meson6 and Meson8b (the Cortex-A5
variant) appear to be similar, with just different sets of banks and
registers.
GPIO interrupts are not supported at the moment due to lack of
documentation.
Signed-off-by: Beniamino Galvani <[email protected]>
---
drivers/pinctrl/Kconfig | 8 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/meson/Makefile | 2 +
drivers/pinctrl/meson/pinctrl-meson.c | 761 ++++++++++++++++++++++
drivers/pinctrl/meson/pinctrl-meson.h | 209 ++++++
drivers/pinctrl/meson/pinctrl-meson8.c | 1087 ++++++++++++++++++++++++++++++++
include/dt-bindings/gpio/meson8-gpio.h | 157 +++++
7 files changed, 2225 insertions(+)
create mode 100644 drivers/pinctrl/meson/Makefile
create mode 100644 drivers/pinctrl/meson/pinctrl-meson.c
create mode 100644 drivers/pinctrl/meson/pinctrl-meson.h
create mode 100644 drivers/pinctrl/meson/pinctrl-meson8.c
create mode 100644 include/dt-bindings/gpio/meson8-gpio.h
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index d014f22..586227f 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -96,6 +96,14 @@ config PINCTRL_FALCON
depends on SOC_FALCON
depends on PINCTRL_LANTIQ
+config PINCTRL_MESON
+ bool
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ select OF_GPIO
+ select REGMAP_MMIO
+
config PINCTRL_ROCKCHIP
bool
select PINMUX
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index c030b3d..61486b2 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
+obj-$(CONFIG_PINCTRL_MESON) += meson/
obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile
new file mode 100644
index 0000000..eafc216
--- /dev/null
+++ b/drivers/pinctrl/meson/Makefile
@@ -0,0 +1,2 @@
+obj-y += pinctrl-meson8.o
+obj-y += pinctrl-meson.o
diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
new file mode 100644
index 0000000..81f643e
--- /dev/null
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -0,0 +1,761 @@
+/*
+ * Pin controller and GPIO driver for Amlogic Meson SoCs
+ *
+ * Copyright (C) 2014 Beniamino Galvani <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * The available pins are organized in banks (A,B,C,D,E,X,Y,Z,AO,
+ * BOOT,CARD for meson6 and X,Y,DV,H,Z,AO,BOOT,CARD for meson8) and
+ * each bank has a variable number of pins.
+ *
+ * The AO bank is special because it belongs to the Always-On power
+ * domain which can't be powered off; the bank also uses a set of
+ * registers different from the other banks.
+ *
+ * For each of the two power domains (regular and always-on) there are
+ * 4 different register ranges that control the following properties
+ * of the pins:
+ * 1) pin muxing
+ * 2) pull enable/disable
+ * 3) pull up/down
+ * 4) GPIO direction, output value, input value
+ *
+ * In some cases the register ranges for pull enable and pull
+ * direction are the same and thus there are only 3 register ranges.
+ *
+ * Every pinmux group can be enabled by a specific bit in the first
+ * register range of the domain; when all groups for a given pin are
+ * disabled the pin acts as a GPIO.
+ *
+ * For the pull and GPIO configuration every bank uses a contiguous
+ * set of bits in the register sets described above; the same register
+ * can be shared by more banks with different offsets.
+ *
+ * In addition to this there are some registers shared between all
+ * banks that control the IRQ functionality. This feature is not
+ * supported at the moment by the driver.
+ */
+
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/seq_file.h>
+
+#include "../core.h"
+#include "../pinctrl-utils.h"
+#include "pinctrl-meson.h"
+
+/**
+ * meson_get_bank() - find the bank containing a given pin
+ *
+ * @domain: the domain containing the pin
+ * @pin: the pin number
+ * @bank: the found bank
+ *
+ * Return: 0 on success, a negative value on error
+ */
+static int meson_get_bank(struct meson_domain *domain, unsigned int pin,
+ struct meson_bank **bank)
+{
+ int i;
+
+ for (i = 0; i < domain->data->num_banks; i++) {
+ if (pin >= domain->data->banks[i].first &&
+ pin <= domain->data->banks[i].last) {
+ *bank = &domain->data->banks[i];
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * meson_get_domain_and_bank() - find domain and bank containing a given pin
+ *
+ * @pc: Meson pin controller device
+ * @pin: the pin number
+ * @domain: the found domain
+ * @bank: the found bank
+ *
+ * Return: 0 on success, a negative value on error
+ */
+static int meson_get_domain_and_bank(struct meson_pinctrl *pc, unsigned int pin,
+ struct meson_domain **domain,
+ struct meson_bank **bank)
+{
+ struct meson_domain *d;
+ int i;
+
+ for (i = 0; i < pc->data->num_domains; i++) {
+ d = &pc->domains[i];
+ if (pin >= d->data->pin_base &&
+ pin < d->data->pin_base + d->data->num_pins) {
+ *domain = d;
+ return meson_get_bank(d, pin, bank);
+ }
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * meson_calc_reg_and_bit() - calculate register and bit for a pin
+ *
+ * @bank: the bank containing the pin
+ * @pin: the pin number
+ * @reg_type: the type of register needed (pull-enable, pull, etc...)
+ * @reg: the computed register offset
+ * @bit: the computed bit
+ */
+static void meson_calc_reg_and_bit(struct meson_bank *bank, unsigned int pin,
+ enum meson_reg_type reg_type,
+ unsigned int *reg, unsigned int *bit)
+{
+ struct meson_reg_desc *desc = &bank->regs[reg_type];
+
+ *reg = desc->reg * 4;
+ *bit = desc->bit + pin - bank->first;
+}
+
+static int meson_get_groups_count(struct pinctrl_dev *pcdev)
+{
+ struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
+
+ return pc->data->num_groups;
+}
+
+static const char *meson_get_group_name(struct pinctrl_dev *pcdev,
+ unsigned selector)
+{
+ struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
+
+ return pc->data->groups[selector].name;
+}
+
+static int meson_get_group_pins(struct pinctrl_dev *pcdev, unsigned selector,
+ const unsigned **pins, unsigned *num_pins)
+{
+ struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
+
+ *pins = pc->data->groups[selector].pins;
+ *num_pins = pc->data->groups[selector].num_pins;
+
+ return 0;
+}
+
+static void meson_pin_dbg_show(struct pinctrl_dev *pcdev, struct seq_file *s,
+ unsigned offset)
+{
+ seq_printf(s, " %s", dev_name(pcdev->dev));
+}
+
+static const struct pinctrl_ops meson_pctrl_ops = {
+ .get_groups_count = meson_get_groups_count,
+ .get_group_name = meson_get_group_name,
+ .get_group_pins = meson_get_group_pins,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_all,
+ .dt_free_map = pinctrl_utils_dt_free_map,
+ .pin_dbg_show = meson_pin_dbg_show,
+};
+
+/**
+ * meson_pmx_disable_other_groups() - disable other groups using a given pin
+ *
+ * @pc: meson pin controller device
+ * @pin: number of the pin
+ * @sel_group: index of the selected group, or -1 if none
+ *
+ * The function disables all pinmux groups using a pin except the
+ * selected one. If @sel_group is -1 all groups are disabled, leaving
+ * the pin in GPIO mode.
+ */
+static void meson_pmx_disable_other_groups(struct meson_pinctrl *pc,
+ unsigned int pin, int sel_group)
+{
+ struct meson_pmx_group *group;
+ struct meson_domain *domain;
+ int i, j;
+
+ for (i = 0; i < pc->data->num_groups; i++) {
+ group = &pc->data->groups[i];
+ if (group->is_gpio || i == sel_group)
+ continue;
+
+ for (j = 0; j < group->num_pins; j++) {
+ if (group->pins[j] == pin) {
+ /* We have found a group using the pin */
+ domain = &pc->domains[group->domain];
+ regmap_update_bits(domain->reg_mux,
+ group->reg * 4,
+ BIT(group->bit), 0);
+ }
+ }
+ }
+}
+
+static int meson_pmx_set_mux(struct pinctrl_dev *pcdev, unsigned func_num,
+ unsigned group_num)
+{
+ struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
+ struct meson_pmx_func *func = &pc->data->funcs[func_num];
+ struct meson_pmx_group *group = &pc->data->groups[group_num];
+ struct meson_domain *domain = &pc->domains[group->domain];
+ int i, ret = 0;
+
+ dev_dbg(pc->dev, "enable function %s, group %s\n", func->name,
+ group->name);
+
+ /*
+ * Disable groups using the same pin.
+ * The selected group is not disabled to avoid glitches.
+ */
+ for (i = 0; i < group->num_pins; i++)
+ meson_pmx_disable_other_groups(pc, group->pins[i], group_num);
+
+ /* Function 0 (GPIO) doesn't need any additional setting */
+ if (func_num)
+ ret = regmap_update_bits(domain->reg_mux, group->reg * 4,
+ BIT(group->bit), BIT(group->bit));
+
+ return ret;
+}
+
+static int meson_pmx_request_gpio(struct pinctrl_dev *pcdev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
+
+ meson_pmx_disable_other_groups(pc, range->pin_base + offset, -1);
+
+ return 0;
+}
+
+static int meson_pmx_get_funcs_count(struct pinctrl_dev *pcdev)
+{
+ struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
+
+ return pc->data->num_funcs;
+}
+
+static const char *meson_pmx_get_func_name(struct pinctrl_dev *pcdev,
+ unsigned selector)
+{
+ struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
+
+ return pc->data->funcs[selector].name;
+}
+
+static int meson_pmx_get_groups(struct pinctrl_dev *pcdev, unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
+
+ *groups = pc->data->funcs[selector].groups;
+ *num_groups = pc->data->funcs[selector].num_groups;
+
+ return 0;
+}
+
+static const struct pinmux_ops meson_pmx_ops = {
+ .set_mux = meson_pmx_set_mux,
+ .get_functions_count = meson_pmx_get_funcs_count,
+ .get_function_name = meson_pmx_get_func_name,
+ .get_function_groups = meson_pmx_get_groups,
+ .gpio_request_enable = meson_pmx_request_gpio,
+};
+
+static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
+ unsigned long *configs, unsigned num_configs)
+{
+ struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
+ struct meson_domain *domain;
+ struct meson_bank *bank;
+ enum pin_config_param param;
+ unsigned int reg, bit;
+ int i, ret;
+ u16 arg;
+
+ ret = meson_get_domain_and_bank(pc, pin, &domain, &bank);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ dev_dbg(pc->dev, "pin %u: disable bias\n", pin);
+
+ meson_calc_reg_and_bit(bank, pin, REG_PULL, ®, &bit);
+ ret = regmap_update_bits(domain->reg_pull, reg,
+ BIT(bit), 0);
+ if (ret)
+ return ret;
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ dev_dbg(pc->dev, "pin %u: enable pull-up\n", pin);
+
+ meson_calc_reg_and_bit(bank, pin, REG_PULLEN,
+ ®, &bit);
+ ret = regmap_update_bits(domain->reg_pullen, reg,
+ BIT(bit), BIT(bit));
+ if (ret)
+ return ret;
+
+ meson_calc_reg_and_bit(bank, pin, REG_PULL, ®, &bit);
+ ret = regmap_update_bits(domain->reg_pull, reg,
+ BIT(bit), BIT(bit));
+ if (ret)
+ return ret;
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ dev_dbg(pc->dev, "pin %u: enable pull-down\n", pin);
+
+ meson_calc_reg_and_bit(bank, pin, REG_PULLEN,
+ ®, &bit);
+ ret = regmap_update_bits(domain->reg_pullen, reg,
+ BIT(bit), BIT(bit));
+ if (ret)
+ return ret;
+
+ meson_calc_reg_and_bit(bank, pin, REG_PULL, ®, &bit);
+ ret = regmap_update_bits(domain->reg_pull, reg,
+ BIT(bit), 0);
+ if (ret)
+ return ret;
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+ }
+
+ return 0;
+}
+
+static int meson_pinconf_get_pull(struct meson_pinctrl *pc, unsigned int pin)
+{
+ struct meson_domain *domain;
+ struct meson_bank *bank;
+ unsigned int reg, bit, val;
+ int ret, conf;
+
+ ret = meson_get_domain_and_bank(pc, pin, &domain, &bank);
+ if (ret)
+ return ret;
+
+ meson_calc_reg_and_bit(bank, pin, REG_PULLEN, ®, &bit);
+
+ ret = regmap_read(domain->reg_pullen, reg, &val);
+ if (ret)
+ return ret;
+
+ if (!(val & BIT(bit))) {
+ conf = PIN_CONFIG_BIAS_DISABLE;
+ } else {
+ meson_calc_reg_and_bit(bank, pin, REG_PULL, ®, &bit);
+
+ ret = regmap_read(domain->reg_pull, reg, &val);
+ if (ret)
+ return ret;
+
+ if (val & BIT(bit))
+ conf = PIN_CONFIG_BIAS_PULL_UP;
+ else
+ conf = PIN_CONFIG_BIAS_PULL_DOWN;
+ }
+
+ return conf;
+}
+
+static int meson_pinconf_get(struct pinctrl_dev *pcdev, unsigned int pin,
+ unsigned long *config)
+{
+ struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
+ enum pin_config_param param = pinconf_to_config_param(*config);
+ u16 arg;
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ case PIN_CONFIG_BIAS_PULL_UP:
+ if (meson_pinconf_get_pull(pc, pin) == param)
+ arg = 1;
+ else
+ return -EINVAL;
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+
+ *config = pinconf_to_config_packed(param, arg);
+ dev_dbg(pc->dev, "pinconf for pin %u is %lu\n", pin, *config);
+
+ return 0;
+}
+
+static int meson_pinconf_group_set(struct pinctrl_dev *pcdev,
+ unsigned int num_group,
+ unsigned long *configs, unsigned num_configs)
+{
+ struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
+ struct meson_pmx_group *group = &pc->data->groups[num_group];
+ int i;
+
+ dev_dbg(pc->dev, "set pinconf for group %s\n", group->name);
+
+ for (i = 0; i < group->num_pins; i++) {
+ meson_pinconf_set(pcdev, group->pins[i], configs,
+ num_configs);
+ }
+
+ return 0;
+}
+
+static int meson_pinconf_group_get(struct pinctrl_dev *pcdev,
+ unsigned int group, unsigned long *config)
+{
+ return -ENOSYS;
+}
+
+static const struct pinconf_ops meson_pinconf_ops = {
+ .pin_config_get = meson_pinconf_get,
+ .pin_config_set = meson_pinconf_set,
+ .pin_config_group_get = meson_pinconf_group_get,
+ .pin_config_group_set = meson_pinconf_group_set,
+ .is_generic = true,
+};
+
+static inline struct meson_domain *to_meson_domain(struct gpio_chip *chip)
+{
+ return container_of(chip, struct meson_domain, chip);
+}
+
+static int meson_gpio_request(struct gpio_chip *chip, unsigned gpio)
+{
+ return pinctrl_request_gpio(chip->base + gpio);
+}
+
+static void meson_gpio_free(struct gpio_chip *chip, unsigned gpio)
+{
+ struct meson_domain *domain = to_meson_domain(chip);
+
+ pinctrl_free_gpio(domain->data->pin_base + gpio);
+}
+
+static int meson_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ struct meson_domain *domain = to_meson_domain(chip);
+ unsigned int reg, bit, pin;
+ struct meson_bank *bank;
+ int ret;
+
+ pin = domain->data->pin_base + gpio;
+ ret = meson_get_bank(domain, pin, &bank);
+ if (ret)
+ return ret;
+
+ meson_calc_reg_and_bit(bank, pin, REG_DIR, ®, &bit);
+
+ return regmap_update_bits(domain->reg_gpio, reg, BIT(bit), BIT(bit));
+}
+
+static int meson_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
+ int value)
+{
+ struct meson_domain *domain = to_meson_domain(chip);
+ unsigned int reg, bit, pin;
+ struct meson_bank *bank;
+ int ret;
+
+ pin = domain->data->pin_base + gpio;
+ ret = meson_get_bank(domain, pin, &bank);
+ if (ret)
+ return ret;
+
+ meson_calc_reg_and_bit(bank, pin, REG_DIR, ®, &bit);
+ ret = regmap_update_bits(domain->reg_gpio, reg, BIT(bit), 0);
+ if (ret)
+ return ret;
+
+ meson_calc_reg_and_bit(bank, pin, REG_OUT, ®, &bit);
+ return regmap_update_bits(domain->reg_gpio, reg, BIT(bit),
+ value ? BIT(bit) : 0);
+}
+
+static void meson_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ struct meson_domain *domain = to_meson_domain(chip);
+ unsigned int reg, bit, pin;
+ struct meson_bank *bank;
+ int ret;
+
+ pin = domain->data->pin_base + gpio;
+ ret = meson_get_bank(domain, pin, &bank);
+ if (ret)
+ return;
+
+ meson_calc_reg_and_bit(bank, pin, REG_OUT, ®, &bit);
+ regmap_update_bits(domain->reg_gpio, reg, BIT(bit),
+ value ? BIT(bit) : 0);
+}
+
+static int meson_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+ struct meson_domain *domain = to_meson_domain(chip);
+ unsigned int reg, bit, val, pin;
+ struct meson_bank *bank;
+ int ret;
+
+ pin = domain->data->pin_base + gpio;
+ ret = meson_get_bank(domain, pin, &bank);
+ if (ret)
+ return ret;
+
+ meson_calc_reg_and_bit(bank, pin, REG_IN, ®, &bit);
+ regmap_read(domain->reg_gpio, reg, &val);
+
+ return !!(val & BIT(bit));
+}
+
+static const struct of_device_id meson_pinctrl_dt_match[] = {
+ {
+ .compatible = "amlogic,meson8-pinctrl",
+ .data = &meson8_pinctrl_data,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, meson_pinctrl_dt_match);
+
+static int meson_gpiolib_register(struct meson_pinctrl *pc)
+{
+ struct meson_domain *domain;
+ int i, ret;
+
+ for (i = 0; i < pc->data->num_domains; i++) {
+ domain = &pc->domains[i];
+
+ domain->chip.label = domain->data->name;
+ domain->chip.dev = pc->dev;
+ domain->chip.request = meson_gpio_request;
+ domain->chip.free = meson_gpio_free;
+ domain->chip.direction_input = meson_gpio_direction_input;
+ domain->chip.direction_output = meson_gpio_direction_output;
+ domain->chip.get = meson_gpio_get;
+ domain->chip.set = meson_gpio_set;
+ domain->chip.base = -1;
+ domain->chip.ngpio = domain->data->num_pins;
+ domain->chip.can_sleep = false;
+ domain->chip.of_node = domain->of_node;
+ domain->chip.of_gpio_n_cells = 2;
+
+ ret = gpiochip_add(&domain->chip);
+ if (ret) {
+ dev_err(pc->dev, "can't add gpio chip %s\n",
+ domain->data->name);
+ goto fail;
+ }
+
+ ret = gpiochip_add_pin_range(&domain->chip, dev_name(pc->dev),
+ 0, domain->data->pin_base,
+ domain->chip.ngpio);
+ if (ret) {
+ dev_err(pc->dev, "can't add pin range\n");
+ goto fail;
+ }
+ }
+
+ return 0;
+fail:
+ for (i--; i >= 0; i--)
+ gpiochip_remove(&pc->domains[i].chip);
+
+ return ret;
+}
+
+static struct meson_domain_data *meson_get_domain_data(struct meson_pinctrl *pc,
+ struct device_node *np)
+{
+ int i;
+
+ for (i = 0; i < pc->data->num_domains; i++) {
+ if (!strcmp(np->name, pc->data->domain_data[i].name))
+ return &pc->data->domain_data[i];
+ }
+
+ return NULL;
+}
+
+static struct regmap_config meson_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static struct regmap *meson_map_resource(struct meson_pinctrl *pc,
+ struct device_node *node, char *name)
+{
+ struct resource res;
+ void __iomem *base;
+ int i;
+
+ i = of_property_match_string(node, "reg-names", name);
+ if (of_address_to_resource(node, i, &res))
+ return ERR_PTR(-ENOENT);
+
+ base = devm_ioremap_resource(pc->dev, &res);
+ if (IS_ERR(base))
+ return base;
+
+ meson_regmap_config.max_register = resource_size(&res) - 4;
+ meson_regmap_config.name = devm_kasprintf(pc->dev, GFP_KERNEL,
+ "%s-%s", node->name,
+ name);
+ if (!meson_regmap_config.name)
+ return ERR_PTR(-ENOMEM);
+
+ return devm_regmap_init_mmio(pc->dev, base, &meson_regmap_config);
+}
+
+static int meson_pinctrl_parse_dt(struct meson_pinctrl *pc,
+ struct device_node *node)
+{
+ struct device_node *np;
+ struct meson_domain *domain;
+ int i = 0, num_domains = 0;
+
+ for_each_child_of_node(node, np) {
+ if (!of_find_property(np, "gpio-controller", NULL))
+ continue;
+ num_domains++;
+ }
+
+ if (num_domains != pc->data->num_domains) {
+ dev_err(pc->dev, "wrong number of subnodes\n");
+ return -EINVAL;
+ }
+
+ pc->domains = devm_kzalloc(pc->dev, num_domains *
+ sizeof(struct meson_domain), GFP_KERNEL);
+ if (!pc->domains)
+ return -ENOMEM;
+
+ for_each_child_of_node(node, np) {
+ if (!of_find_property(np, "gpio-controller", NULL))
+ continue;
+
+ domain = &pc->domains[i];
+
+ domain->data = meson_get_domain_data(pc, np);
+ if (!domain->data) {
+ dev_err(pc->dev, "domain data not found for node %s\n",
+ np->name);
+ return -ENODEV;
+ }
+
+ domain->of_node = np;
+
+ domain->reg_mux = meson_map_resource(pc, np, "mux");
+ if (IS_ERR(domain->reg_mux)) {
+ dev_err(pc->dev, "mux registers not found\n");
+ return PTR_ERR(domain->reg_mux);
+ }
+
+ domain->reg_pull = meson_map_resource(pc, np, "pull");
+ if (IS_ERR(domain->reg_pull)) {
+ dev_err(pc->dev, "pull registers not found\n");
+ return PTR_ERR(domain->reg_pull);
+ }
+
+ domain->reg_pullen = meson_map_resource(pc, np, "pull-enable");
+ /* Use pull region if pull-enable one is not present */
+ if (IS_ERR(domain->reg_pullen))
+ domain->reg_pullen = domain->reg_pull;
+
+ domain->reg_gpio = meson_map_resource(pc, np, "gpio");
+ if (IS_ERR(domain->reg_gpio)) {
+ dev_err(pc->dev, "gpio registers not found\n");
+ return PTR_ERR(domain->reg_gpio);
+ }
+
+ i++;
+ }
+
+ return 0;
+}
+
+static int meson_pinctrl_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device *dev = &pdev->dev;
+ struct meson_pinctrl *pc;
+ int ret;
+
+ pc = devm_kzalloc(dev, sizeof(struct meson_pinctrl), GFP_KERNEL);
+ if (!pc)
+ return -ENOMEM;
+
+ pc->dev = dev;
+ match = of_match_node(meson_pinctrl_dt_match, pdev->dev.of_node);
+ pc->data = (struct meson_pinctrl_data *)match->data;
+
+ ret = meson_pinctrl_parse_dt(pc, pdev->dev.of_node);
+ if (ret)
+ return ret;
+
+ pc->desc.name = "pinctrl-meson";
+ pc->desc.owner = THIS_MODULE;
+ pc->desc.pctlops = &meson_pctrl_ops;
+ pc->desc.pmxops = &meson_pmx_ops;
+ pc->desc.confops = &meson_pinconf_ops;
+ pc->desc.pins = pc->data->pins;
+ pc->desc.npins = pc->data->num_pins;
+
+ pc->pcdev = pinctrl_register(&pc->desc, pc->dev, pc);
+ if (!pc->pcdev) {
+ dev_err(pc->dev, "can't register pinctrl device");
+ return -EINVAL;
+ }
+
+ ret = meson_gpiolib_register(pc);
+ if (ret) {
+ pinctrl_unregister(pc->pcdev);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct platform_driver meson_pinctrl_driver = {
+ .probe = meson_pinctrl_probe,
+ .driver = {
+ .name = "meson-pinctrl",
+ .of_match_table = meson_pinctrl_dt_match,
+ },
+};
+module_platform_driver(meson_pinctrl_driver);
+
+MODULE_AUTHOR("Beniamino Galvani <[email protected]>");
+MODULE_DESCRIPTION("Amlogic Meson pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h
new file mode 100644
index 0000000..105bfa6
--- /dev/null
+++ b/drivers/pinctrl/meson/pinctrl-meson.h
@@ -0,0 +1,209 @@
+/*
+ * Pin controller and GPIO driver for Amlogic Meson SoCs
+ *
+ * Copyright (C) 2014 Beniamino Galvani <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+/**
+ * struct meson_pmx_group - a pinmux group
+ *
+ * @name: group name
+ * @pins: pins in the group
+ * @num_pins: number of pins in the group
+ * @is_gpio: whether the group is a single GPIO group
+ * @reg: register offset for the group in the domain mux registers
+ * @bit bit index enabling the group
+ * @domain: index of the domain this group belongs to
+ */
+struct meson_pmx_group {
+ const char *name;
+ const unsigned int *pins;
+ unsigned int num_pins;
+ bool is_gpio;
+ unsigned int reg;
+ unsigned int bit;
+ unsigned int domain;
+};
+
+/**
+ * struct meson_pmx_func - a pinmux function
+ *
+ * @name: function name
+ * @groups: groups in the function
+ * @num_groups: number of groups in the function
+ */
+struct meson_pmx_func {
+ const char *name;
+ const char **groups;
+ unsigned int num_groups;
+};
+
+/**
+ * struct meson_reg_desc - a register descriptor
+ *
+ * @reg: register offset in the regmap
+ * @bit: bit index in register
+ *
+ * The structure describes the information needed to control pull,
+ * pull-enable, direction, etc. for a single pin
+ */
+struct meson_reg_desc {
+ unsigned int reg;
+ unsigned int bit;
+};
+
+/**
+ * enum meson_reg_type - type of registers encoded in @meson_reg_desc
+ */
+enum meson_reg_type {
+ REG_PULLEN,
+ REG_PULL,
+ REG_DIR,
+ REG_OUT,
+ REG_IN,
+ NUM_REG,
+};
+
+/**
+ * struct meson bank
+ *
+ * @name: bank name
+ * @first: first pin of the bank
+ * @last: last pin of the bank
+ * @regs: array of register descriptors
+ *
+ * A bank represents a set of pins controlled by a contiguous set of
+ * bits in the domain registers. The structure specifies which bits in
+ * the regmap control the different functionalities. Each member of
+ * the @regs array refers to the first pin of the bank.
+ */
+struct meson_bank {
+ const char *name;
+ unsigned int first;
+ unsigned int last;
+ struct meson_reg_desc regs[NUM_REG];
+};
+
+/**
+ * struct meson_domain_data - domain platform data
+ *
+ * @name: name of the domain
+ * @banks: set of banks belonging to the domain
+ * @num_banks: number of banks in the domain
+ */
+struct meson_domain_data {
+ const char *name;
+ struct meson_bank *banks;
+ unsigned int num_banks;
+ unsigned int pin_base;
+ unsigned int num_pins;
+};
+
+/**
+ * struct meson_domain
+ *
+ * @reg_mux: registers for mux settings
+ * @reg_pullen: registers for pull-enable settings
+ * @reg_pull: registers for pull settings
+ * @reg_gpio: registers for gpio settings
+ * @chip: gpio chip associated with the domain
+ * @data; platform data for the domain
+ * @node: device tree node for the domain
+ *
+ * A domain represents a set of banks controlled by the same set of
+ * registers.
+ */
+struct meson_domain {
+ struct regmap *reg_mux;
+ struct regmap *reg_pullen;
+ struct regmap *reg_pull;
+ struct regmap *reg_gpio;
+
+ struct gpio_chip chip;
+ struct meson_domain_data *data;
+ struct device_node *of_node;
+};
+
+struct meson_pinctrl_data {
+ const struct pinctrl_pin_desc *pins;
+ struct meson_pmx_group *groups;
+ struct meson_pmx_func *funcs;
+ struct meson_domain_data *domain_data;
+ unsigned int num_pins;
+ unsigned int num_groups;
+ unsigned int num_funcs;
+ unsigned int num_domains;
+};
+
+struct meson_pinctrl {
+ struct device *dev;
+ struct pinctrl_dev *pcdev;
+ struct pinctrl_desc desc;
+ struct meson_pinctrl_data *data;
+ struct meson_domain *domains;
+};
+
+#define GROUP(grp, r, b) \
+ { \
+ .name = #grp, \
+ .pins = grp ## _pins, \
+ .num_pins = ARRAY_SIZE(grp ## _pins), \
+ .reg = r, \
+ .bit = b, \
+ .domain = 0, \
+ }
+
+#define GPIO_GROUP(gpio) \
+ { \
+ .name = #gpio, \
+ .pins = (const unsigned int[]){ PIN_ ## gpio}, \
+ .num_pins = 1, \
+ .is_gpio = true, \
+ }
+
+#define GROUP_AO(grp, r, b) \
+ { \
+ .name = #grp, \
+ .pins = grp ## _pins, \
+ .num_pins = ARRAY_SIZE(grp ## _pins), \
+ .reg = r, \
+ .bit = b, \
+ .domain = 1, \
+ }
+
+#define FUNCTION(fn) \
+ { \
+ .name = #fn, \
+ .groups = fn ## _groups, \
+ .num_groups = ARRAY_SIZE(fn ## _groups), \
+ }
+
+#define BANK(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib) \
+ { \
+ .name = n, \
+ .first = f, \
+ .last = l, \
+ .regs = { \
+ [REG_PULLEN] = { per, peb }, \
+ [REG_PULL] = { pr, pb }, \
+ [REG_DIR] = { dr, db }, \
+ [REG_OUT] = { or, ob }, \
+ [REG_IN] = { ir, ib }, \
+ }, \
+ }
+
+#define MESON_PIN(x) PINCTRL_PIN(PIN_ ## x, #x)
+
+extern struct meson_pinctrl_data meson8_pinctrl_data;
diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c b/drivers/pinctrl/meson/pinctrl-meson8.c
new file mode 100644
index 0000000..ce724bb
--- /dev/null
+++ b/drivers/pinctrl/meson/pinctrl-meson8.c
@@ -0,0 +1,1087 @@
+/*
+ * Pin controller and GPIO driver for Amlogic Meson8.
+ *
+ * Copyright (C) 2014 Beniamino Galvani <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <dt-bindings/gpio/meson8-gpio.h>
+#include "pinctrl-meson.h"
+
+#define AO_OFFSET 120
+
+#define PIN_GPIOX_0 GPIOX_0
+#define PIN_GPIOX_1 GPIOX_1
+#define PIN_GPIOX_2 GPIOX_2
+#define PIN_GPIOX_3 GPIOX_3
+#define PIN_GPIOX_4 GPIOX_4
+#define PIN_GPIOX_5 GPIOX_5
+#define PIN_GPIOX_6 GPIOX_6
+#define PIN_GPIOX_7 GPIOX_7
+#define PIN_GPIOX_8 GPIOX_8
+#define PIN_GPIOX_9 GPIOX_9
+#define PIN_GPIOX_10 GPIOX_10
+#define PIN_GPIOX_11 GPIOX_11
+#define PIN_GPIOX_12 GPIOX_12
+#define PIN_GPIOX_13 GPIOX_13
+#define PIN_GPIOX_14 GPIOX_14
+#define PIN_GPIOX_15 GPIOX_15
+#define PIN_GPIOX_16 GPIOX_16
+#define PIN_GPIOX_17 GPIOX_17
+#define PIN_GPIOX_18 GPIOX_18
+#define PIN_GPIOX_19 GPIOX_19
+#define PIN_GPIOX_20 GPIOX_20
+#define PIN_GPIOX_21 GPIOX_21
+#define PIN_GPIOY_0 GPIOY_0
+#define PIN_GPIOY_1 GPIOY_1
+#define PIN_GPIOY_2 GPIOY_2
+#define PIN_GPIOY_3 GPIOY_3
+#define PIN_GPIOY_4 GPIOY_4
+#define PIN_GPIOY_5 GPIOY_5
+#define PIN_GPIOY_6 GPIOY_6
+#define PIN_GPIOY_7 GPIOY_7
+#define PIN_GPIOY_8 GPIOY_8
+#define PIN_GPIOY_9 GPIOY_9
+#define PIN_GPIOY_10 GPIOY_10
+#define PIN_GPIOY_11 GPIOY_11
+#define PIN_GPIOY_12 GPIOY_12
+#define PIN_GPIOY_13 GPIOY_13
+#define PIN_GPIOY_14 GPIOY_14
+#define PIN_GPIOY_15 GPIOY_15
+#define PIN_GPIOY_16 GPIOY_16
+#define PIN_GPIODV_0 GPIODV_0
+#define PIN_GPIODV_1 GPIODV_1
+#define PIN_GPIODV_2 GPIODV_2
+#define PIN_GPIODV_3 GPIODV_3
+#define PIN_GPIODV_4 GPIODV_4
+#define PIN_GPIODV_5 GPIODV_5
+#define PIN_GPIODV_6 GPIODV_6
+#define PIN_GPIODV_7 GPIODV_7
+#define PIN_GPIODV_8 GPIODV_8
+#define PIN_GPIODV_9 GPIODV_9
+#define PIN_GPIODV_10 GPIODV_10
+#define PIN_GPIODV_11 GPIODV_11
+#define PIN_GPIODV_12 GPIODV_12
+#define PIN_GPIODV_13 GPIODV_13
+#define PIN_GPIODV_14 GPIODV_14
+#define PIN_GPIODV_15 GPIODV_15
+#define PIN_GPIODV_16 GPIODV_16
+#define PIN_GPIODV_17 GPIODV_17
+#define PIN_GPIODV_18 GPIODV_18
+#define PIN_GPIODV_19 GPIODV_19
+#define PIN_GPIODV_20 GPIODV_20
+#define PIN_GPIODV_21 GPIODV_21
+#define PIN_GPIODV_22 GPIODV_22
+#define PIN_GPIODV_23 GPIODV_23
+#define PIN_GPIODV_24 GPIODV_24
+#define PIN_GPIODV_25 GPIODV_25
+#define PIN_GPIODV_26 GPIODV_26
+#define PIN_GPIODV_27 GPIODV_27
+#define PIN_GPIODV_28 GPIODV_28
+#define PIN_GPIODV_29 GPIODV_29
+#define PIN_GPIOH_0 GPIOH_0
+#define PIN_GPIOH_1 GPIOH_1
+#define PIN_GPIOH_2 GPIOH_2
+#define PIN_GPIOH_3 GPIOH_3
+#define PIN_GPIOH_4 GPIOH_4
+#define PIN_GPIOH_5 GPIOH_5
+#define PIN_GPIOH_6 GPIOH_6
+#define PIN_GPIOH_7 GPIOH_7
+#define PIN_GPIOH_8 GPIOH_8
+#define PIN_GPIOH_9 GPIOH_9
+#define PIN_GPIOZ_0 GPIOZ_0
+#define PIN_GPIOZ_1 GPIOZ_1
+#define PIN_GPIOZ_2 GPIOZ_2
+#define PIN_GPIOZ_3 GPIOZ_3
+#define PIN_GPIOZ_4 GPIOZ_4
+#define PIN_GPIOZ_5 GPIOZ_5
+#define PIN_GPIOZ_6 GPIOZ_6
+#define PIN_GPIOZ_7 GPIOZ_7
+#define PIN_GPIOZ_8 GPIOZ_8
+#define PIN_GPIOZ_9 GPIOZ_9
+#define PIN_GPIOZ_10 GPIOZ_10
+#define PIN_GPIOZ_11 GPIOZ_11
+#define PIN_GPIOZ_12 GPIOZ_12
+#define PIN_GPIOZ_13 GPIOZ_13
+#define PIN_GPIOZ_14 GPIOZ_14
+#define PIN_CARD_0 CARD_0
+#define PIN_CARD_1 CARD_1
+#define PIN_CARD_2 CARD_2
+#define PIN_CARD_3 CARD_3
+#define PIN_CARD_4 CARD_4
+#define PIN_CARD_5 CARD_5
+#define PIN_CARD_6 CARD_6
+#define PIN_BOOT_0 BOOT_0
+#define PIN_BOOT_1 BOOT_1
+#define PIN_BOOT_2 BOOT_2
+#define PIN_BOOT_3 BOOT_3
+#define PIN_BOOT_4 BOOT_4
+#define PIN_BOOT_5 BOOT_5
+#define PIN_BOOT_6 BOOT_6
+#define PIN_BOOT_7 BOOT_7
+#define PIN_BOOT_8 BOOT_8
+#define PIN_BOOT_9 BOOT_9
+#define PIN_BOOT_10 BOOT_10
+#define PIN_BOOT_11 BOOT_11
+#define PIN_BOOT_12 BOOT_12
+#define PIN_BOOT_13 BOOT_13
+#define PIN_BOOT_14 BOOT_14
+#define PIN_BOOT_15 BOOT_15
+#define PIN_BOOT_16 BOOT_16
+#define PIN_BOOT_17 BOOT_17
+#define PIN_BOOT_18 BOOT_18
+
+#define PIN_GPIOAO_0 (AO_OFFSET + GPIOAO_0)
+#define PIN_GPIOAO_1 (AO_OFFSET + GPIOAO_1)
+#define PIN_GPIOAO_2 (AO_OFFSET + GPIOAO_2)
+#define PIN_GPIOAO_3 (AO_OFFSET + GPIOAO_3)
+#define PIN_GPIOAO_4 (AO_OFFSET + GPIOAO_4)
+#define PIN_GPIOAO_5 (AO_OFFSET + GPIOAO_5)
+#define PIN_GPIOAO_6 (AO_OFFSET + GPIOAO_6)
+#define PIN_GPIOAO_7 (AO_OFFSET + GPIOAO_7)
+#define PIN_GPIOAO_8 (AO_OFFSET + GPIOAO_8)
+#define PIN_GPIOAO_9 (AO_OFFSET + GPIOAO_9)
+#define PIN_GPIOAO_10 (AO_OFFSET + GPIOAO_10)
+#define PIN_GPIOAO_11 (AO_OFFSET + GPIOAO_11)
+#define PIN_GPIOAO_12 (AO_OFFSET + GPIOAO_12)
+#define PIN_GPIOAO_13 (AO_OFFSET + GPIOAO_13)
+#define PIN_GPIO_BSD_EN (AO_OFFSET + GPIO_BSD_EN)
+#define PIN_GPIO_TEST_N (AO_OFFSET + GPIO_TEST_N)
+
+static const struct pinctrl_pin_desc meson8_pins[] = {
+ MESON_PIN(GPIOX_0),
+ MESON_PIN(GPIOX_1),
+ MESON_PIN(GPIOX_2),
+ MESON_PIN(GPIOX_3),
+ MESON_PIN(GPIOX_4),
+ MESON_PIN(GPIOX_5),
+ MESON_PIN(GPIOX_6),
+ MESON_PIN(GPIOX_7),
+ MESON_PIN(GPIOX_8),
+ MESON_PIN(GPIOX_9),
+ MESON_PIN(GPIOX_10),
+ MESON_PIN(GPIOX_11),
+ MESON_PIN(GPIOX_12),
+ MESON_PIN(GPIOX_13),
+ MESON_PIN(GPIOX_14),
+ MESON_PIN(GPIOX_15),
+ MESON_PIN(GPIOX_16),
+ MESON_PIN(GPIOX_17),
+ MESON_PIN(GPIOX_18),
+ MESON_PIN(GPIOX_19),
+ MESON_PIN(GPIOX_20),
+ MESON_PIN(GPIOX_21),
+ MESON_PIN(GPIOY_0),
+ MESON_PIN(GPIOY_1),
+ MESON_PIN(GPIOY_2),
+ MESON_PIN(GPIOY_3),
+ MESON_PIN(GPIOY_4),
+ MESON_PIN(GPIOY_5),
+ MESON_PIN(GPIOY_6),
+ MESON_PIN(GPIOY_7),
+ MESON_PIN(GPIOY_8),
+ MESON_PIN(GPIOY_9),
+ MESON_PIN(GPIOY_10),
+ MESON_PIN(GPIOY_11),
+ MESON_PIN(GPIOY_12),
+ MESON_PIN(GPIOY_13),
+ MESON_PIN(GPIOY_14),
+ MESON_PIN(GPIOY_15),
+ MESON_PIN(GPIOY_16),
+ MESON_PIN(GPIODV_0),
+ MESON_PIN(GPIODV_1),
+ MESON_PIN(GPIODV_2),
+ MESON_PIN(GPIODV_3),
+ MESON_PIN(GPIODV_4),
+ MESON_PIN(GPIODV_5),
+ MESON_PIN(GPIODV_6),
+ MESON_PIN(GPIODV_7),
+ MESON_PIN(GPIODV_8),
+ MESON_PIN(GPIODV_9),
+ MESON_PIN(GPIODV_10),
+ MESON_PIN(GPIODV_11),
+ MESON_PIN(GPIODV_12),
+ MESON_PIN(GPIODV_13),
+ MESON_PIN(GPIODV_14),
+ MESON_PIN(GPIODV_15),
+ MESON_PIN(GPIODV_16),
+ MESON_PIN(GPIODV_17),
+ MESON_PIN(GPIODV_18),
+ MESON_PIN(GPIODV_19),
+ MESON_PIN(GPIODV_20),
+ MESON_PIN(GPIODV_21),
+ MESON_PIN(GPIODV_22),
+ MESON_PIN(GPIODV_23),
+ MESON_PIN(GPIODV_24),
+ MESON_PIN(GPIODV_25),
+ MESON_PIN(GPIODV_26),
+ MESON_PIN(GPIODV_27),
+ MESON_PIN(GPIODV_28),
+ MESON_PIN(GPIODV_29),
+ MESON_PIN(GPIOH_0),
+ MESON_PIN(GPIOH_1),
+ MESON_PIN(GPIOH_2),
+ MESON_PIN(GPIOH_3),
+ MESON_PIN(GPIOH_4),
+ MESON_PIN(GPIOH_5),
+ MESON_PIN(GPIOH_6),
+ MESON_PIN(GPIOH_7),
+ MESON_PIN(GPIOH_8),
+ MESON_PIN(GPIOH_9),
+ MESON_PIN(GPIOZ_0),
+ MESON_PIN(GPIOZ_1),
+ MESON_PIN(GPIOZ_2),
+ MESON_PIN(GPIOZ_3),
+ MESON_PIN(GPIOZ_4),
+ MESON_PIN(GPIOZ_5),
+ MESON_PIN(GPIOZ_6),
+ MESON_PIN(GPIOZ_7),
+ MESON_PIN(GPIOZ_8),
+ MESON_PIN(GPIOZ_9),
+ MESON_PIN(GPIOZ_10),
+ MESON_PIN(GPIOZ_11),
+ MESON_PIN(GPIOZ_12),
+ MESON_PIN(GPIOZ_13),
+ MESON_PIN(GPIOZ_14),
+ MESON_PIN(CARD_0),
+ MESON_PIN(CARD_1),
+ MESON_PIN(CARD_2),
+ MESON_PIN(CARD_3),
+ MESON_PIN(CARD_4),
+ MESON_PIN(CARD_5),
+ MESON_PIN(CARD_6),
+ MESON_PIN(BOOT_0),
+ MESON_PIN(BOOT_1),
+ MESON_PIN(BOOT_2),
+ MESON_PIN(BOOT_3),
+ MESON_PIN(BOOT_4),
+ MESON_PIN(BOOT_5),
+ MESON_PIN(BOOT_6),
+ MESON_PIN(BOOT_7),
+ MESON_PIN(BOOT_8),
+ MESON_PIN(BOOT_9),
+ MESON_PIN(BOOT_10),
+ MESON_PIN(BOOT_11),
+ MESON_PIN(BOOT_12),
+ MESON_PIN(BOOT_13),
+ MESON_PIN(BOOT_14),
+ MESON_PIN(BOOT_15),
+ MESON_PIN(BOOT_16),
+ MESON_PIN(BOOT_17),
+ MESON_PIN(BOOT_18),
+ MESON_PIN(GPIOAO_0),
+ MESON_PIN(GPIOAO_1),
+ MESON_PIN(GPIOAO_2),
+ MESON_PIN(GPIOAO_3),
+ MESON_PIN(GPIOAO_4),
+ MESON_PIN(GPIOAO_5),
+ MESON_PIN(GPIOAO_6),
+ MESON_PIN(GPIOAO_7),
+ MESON_PIN(GPIOAO_8),
+ MESON_PIN(GPIOAO_9),
+ MESON_PIN(GPIOAO_10),
+ MESON_PIN(GPIOAO_11),
+ MESON_PIN(GPIOAO_12),
+ MESON_PIN(GPIOAO_13),
+ MESON_PIN(GPIO_BSD_EN),
+ MESON_PIN(GPIO_TEST_N),
+};
+
+/* bank X */
+const unsigned int sd_d0_a_pins[] = { PIN_GPIOX_0 };
+const unsigned int sd_d1_a_pins[] = { PIN_GPIOX_1 };
+const unsigned int sd_d2_a_pins[] = { PIN_GPIOX_2 };
+const unsigned int sd_d3_a_pins[] = { PIN_GPIOX_3 };
+const unsigned int sd_clk_a_pins[] = { PIN_GPIOX_8 };
+const unsigned int sd_cmd_a_pins[] = { PIN_GPIOX_9 };
+
+const unsigned int sdxc_d0_a_pins[] = { PIN_GPIOX_0 };
+const unsigned int sdxc_d13_a_pins[] = { PIN_GPIOX_1, PIN_GPIOX_2,
+ PIN_GPIOX_3 };
+const unsigned int sdxc_d47_a_pins[] = { PIN_GPIOX_4, PIN_GPIOX_5,
+ PIN_GPIOX_6, PIN_GPIOX_7 };
+const unsigned int sdxc_clk_a_pins[] = { PIN_GPIOX_8 };
+const unsigned int sdxc_cmd_a_pins[] = { PIN_GPIOX_9 };
+
+const unsigned int pcm_out_a_pins[] = { PIN_GPIOX_4 };
+const unsigned int pcm_in_a_pins[] = { PIN_GPIOX_5 };
+const unsigned int pcm_fs_a_pins[] = { PIN_GPIOX_6 };
+const unsigned int pcm_clk_a_pins[] = { PIN_GPIOX_7 };
+
+const unsigned int uart_tx_a0_pins[] = { PIN_GPIOX_4 };
+const unsigned int uart_rx_a0_pins[] = { PIN_GPIOX_5 };
+const unsigned int uart_cts_a0_pins[] = { PIN_GPIOX_6 };
+const unsigned int uart_rts_a0_pins[] = { PIN_GPIOX_7 };
+
+const unsigned int uart_tx_a1_pins[] = { PIN_GPIOX_12 };
+const unsigned int uart_rx_a1_pins[] = { PIN_GPIOX_13 };
+const unsigned int uart_cts_a1_pins[] = { PIN_GPIOX_14 };
+const unsigned int uart_rts_a1_pins[] = { PIN_GPIOX_15 };
+
+const unsigned int uart_tx_b0_pins[] = { PIN_GPIOX_16 };
+const unsigned int uart_rx_b0_pins[] = { PIN_GPIOX_17 };
+const unsigned int uart_cts_b0_pins[] = { PIN_GPIOX_18 };
+const unsigned int uart_rts_b0_pins[] = { PIN_GPIOX_19 };
+
+const unsigned int iso7816_det_pins[] = { PIN_GPIOX_16 };
+const unsigned int iso7816_reset_pins[] = { PIN_GPIOX_17 };
+const unsigned int iso7816_clk_pins[] = { PIN_GPIOX_18 };
+const unsigned int iso7816_data_pins[] = { PIN_GPIOX_19 };
+
+const unsigned int i2c_sda_d0_pins[] = { PIN_GPIOX_16 };
+const unsigned int i2c_sck_d0_pins[] = { PIN_GPIOX_17 };
+
+const unsigned int xtal_32k_out_pins[] = { PIN_GPIOX_10 };
+const unsigned int xtal_24m_out_pins[] = { PIN_GPIOX_11 };
+
+/* bank Y */
+const unsigned int uart_tx_c_pins[] = { PIN_GPIOY_0 };
+const unsigned int uart_rx_c_pins[] = { PIN_GPIOY_1 };
+const unsigned int uart_cts_c_pins[] = { PIN_GPIOY_2 };
+const unsigned int uart_rts_c_pins[] = { PIN_GPIOY_3 };
+
+const unsigned int pcm_out_b_pins[] = { PIN_GPIOY_4 };
+const unsigned int pcm_in_b_pins[] = { PIN_GPIOY_5 };
+const unsigned int pcm_fs_b_pins[] = { PIN_GPIOY_6 };
+const unsigned int pcm_clk_b_pins[] = { PIN_GPIOY_7 };
+
+const unsigned int i2c_sda_c0_pins[] = { PIN_GPIOY_0 };
+const unsigned int i2c_sck_c0_pins[] = { PIN_GPIOY_1 };
+
+/* bank DV */
+const unsigned int dvin_rgb_pins[] = { PIN_GPIODV_0, PIN_GPIODV_1,
+ PIN_GPIODV_2, PIN_GPIODV_3,
+ PIN_GPIODV_4, PIN_GPIODV_5,
+ PIN_GPIODV_6, PIN_GPIODV_7,
+ PIN_GPIODV_8, PIN_GPIODV_9,
+ PIN_GPIODV_10, PIN_GPIODV_11,
+ PIN_GPIODV_12, PIN_GPIODV_13,
+ PIN_GPIODV_14, PIN_GPIODV_15,
+ PIN_GPIODV_16, PIN_GPIODV_17,
+ PIN_GPIODV_18, PIN_GPIODV_19,
+ PIN_GPIODV_20, PIN_GPIODV_21,
+ PIN_GPIODV_22, PIN_GPIODV_23 };
+const unsigned int dvin_vs_pins[] = { PIN_GPIODV_24 };
+const unsigned int dvin_hs_pins[] = { PIN_GPIODV_25 };
+const unsigned int dvin_clk_pins[] = { PIN_GPIODV_26 };
+const unsigned int dvin_de_pins[] = { PIN_GPIODV_27 };
+
+const unsigned int enc_0_pins[] = { PIN_GPIODV_0 };
+const unsigned int enc_1_pins[] = { PIN_GPIODV_1 };
+const unsigned int enc_2_pins[] = { PIN_GPIODV_2 };
+const unsigned int enc_3_pins[] = { PIN_GPIODV_3 };
+const unsigned int enc_4_pins[] = { PIN_GPIODV_4 };
+const unsigned int enc_5_pins[] = { PIN_GPIODV_5 };
+const unsigned int enc_6_pins[] = { PIN_GPIODV_6 };
+const unsigned int enc_7_pins[] = { PIN_GPIODV_7 };
+const unsigned int enc_8_pins[] = { PIN_GPIODV_8 };
+const unsigned int enc_9_pins[] = { PIN_GPIODV_9 };
+const unsigned int enc_10_pins[] = { PIN_GPIODV_10 };
+const unsigned int enc_11_pins[] = { PIN_GPIODV_11 };
+const unsigned int enc_12_pins[] = { PIN_GPIODV_12 };
+const unsigned int enc_13_pins[] = { PIN_GPIODV_13 };
+const unsigned int enc_14_pins[] = { PIN_GPIODV_14 };
+const unsigned int enc_15_pins[] = { PIN_GPIODV_15 };
+const unsigned int enc_16_pins[] = { PIN_GPIODV_16 };
+const unsigned int enc_17_pins[] = { PIN_GPIODV_17 };
+
+const unsigned int uart_tx_b1_pins[] = { PIN_GPIODV_24 };
+const unsigned int uart_rx_b1_pins[] = { PIN_GPIODV_25 };
+const unsigned int uart_cts_b1_pins[] = { PIN_GPIODV_26 };
+const unsigned int uart_rts_b1_pins[] = { PIN_GPIODV_27 };
+
+const unsigned int vga_vs_pins[] = { PIN_GPIODV_24 };
+const unsigned int vga_hs_pins[] = { PIN_GPIODV_25 };
+
+/* bank H */
+const unsigned int hdmi_hpd_pins[] = { PIN_GPIOH_0 };
+const unsigned int hdmi_sda_pins[] = { PIN_GPIOH_1 };
+const unsigned int hdmi_scl_pins[] = { PIN_GPIOH_2 };
+const unsigned int hdmi_cec_pins[] = { PIN_GPIOH_3 };
+
+const unsigned int spi_ss0_0_pins[] = { PIN_GPIOH_3 };
+const unsigned int spi_miso_0_pins[] = { PIN_GPIOH_4 };
+const unsigned int spi_mosi_0_pins[] = { PIN_GPIOH_5 };
+const unsigned int spi_sclk_0_pins[] = { PIN_GPIOH_6 };
+
+const unsigned int i2c_sda_d1_pins[] = { PIN_GPIOH_7 };
+const unsigned int i2c_sck_d1_pins[] = { PIN_GPIOH_8 };
+
+/* bank Z */
+const unsigned int spi_ss0_1_pins[] = { PIN_GPIOZ_9 };
+const unsigned int spi_ss1_1_pins[] = { PIN_GPIOZ_10 };
+const unsigned int spi_sclk_1_pins[] = { PIN_GPIOZ_11 };
+const unsigned int spi_mosi_1_pins[] = { PIN_GPIOZ_12 };
+const unsigned int spi_miso_1_pins[] = { PIN_GPIOZ_13 };
+const unsigned int spi_ss2_1_pins[] = { PIN_GPIOZ_14 };
+
+const unsigned int eth_tx_clk_50m_pins[] = { PIN_GPIOZ_4 };
+const unsigned int eth_tx_en_pins[] = { PIN_GPIOZ_5 };
+const unsigned int eth_txd1_pins[] = { PIN_GPIOZ_6 };
+const unsigned int eth_txd0_pins[] = { PIN_GPIOZ_7 };
+const unsigned int eth_rx_clk_in_pins[] = { PIN_GPIOZ_8 };
+const unsigned int eth_rx_dv_pins[] = { PIN_GPIOZ_9 };
+const unsigned int eth_rxd1_pins[] = { PIN_GPIOZ_10 };
+const unsigned int eth_rxd0_pins[] = { PIN_GPIOZ_11 };
+const unsigned int eth_mdio_pins[] = { PIN_GPIOZ_12 };
+const unsigned int eth_mdc_pins[] = { PIN_GPIOZ_13 };
+
+const unsigned int i2c_sda_a0_pins[] = { PIN_GPIOZ_0 };
+const unsigned int i2c_sck_a0_pins[] = { PIN_GPIOZ_1 };
+
+const unsigned int i2c_sda_b_pins[] = { PIN_GPIOZ_2 };
+const unsigned int i2c_sck_b_pins[] = { PIN_GPIOZ_3 };
+
+const unsigned int i2c_sda_c1_pins[] = { PIN_GPIOZ_4 };
+const unsigned int i2c_sck_c1_pins[] = { PIN_GPIOZ_5 };
+
+const unsigned int i2c_sda_a1_pins[] = { PIN_GPIOZ_0 };
+const unsigned int i2c_sck_a1_pins[] = { PIN_GPIOZ_1 };
+
+const unsigned int i2c_sda_a2_pins[] = { PIN_GPIOZ_0 };
+const unsigned int i2c_sck_a2_pins[] = { PIN_GPIOZ_1 };
+
+/* bank BOOT */
+const unsigned int sd_d0_c_pins[] = { PIN_BOOT_0 };
+const unsigned int sd_d1_c_pins[] = { PIN_BOOT_1 };
+const unsigned int sd_d2_c_pins[] = { PIN_BOOT_2 };
+const unsigned int sd_d3_c_pins[] = { PIN_BOOT_3 };
+const unsigned int sd_cmd_c_pins[] = { PIN_BOOT_16 };
+const unsigned int sd_clk_c_pins[] = { PIN_BOOT_17 };
+
+const unsigned int sdxc_d0_c_pins[] = { PIN_BOOT_0};
+const unsigned int sdxc_d13_c_pins[] = { PIN_BOOT_1, PIN_BOOT_2, PIN_BOOT_3 };
+const unsigned int sdxc_d47_c_pins[] = { PIN_BOOT_4, PIN_BOOT_5,
+ PIN_BOOT_6, PIN_BOOT_7 };
+const unsigned int sdxc_cmd_c_pins[] = { PIN_BOOT_16 };
+const unsigned int sdxc_clk_c_pins[] = { PIN_BOOT_17 };
+
+const unsigned int nand_io_pins[] = { PIN_BOOT_0, PIN_BOOT_1,
+ PIN_BOOT_2, PIN_BOOT_3,
+ PIN_BOOT_4, PIN_BOOT_5,
+ PIN_BOOT_6, PIN_BOOT_7 };
+const unsigned int nand_io_ce0_pins[] = { PIN_BOOT_8 };
+const unsigned int nand_io_ce1_pins[] = { PIN_BOOT_9 };
+const unsigned int nand_io_rb0_pins[] = { PIN_BOOT_10 };
+const unsigned int nand_ale_pins[] = { PIN_BOOT_11 };
+const unsigned int nand_cle_pins[] = { PIN_BOOT_12 };
+const unsigned int nand_wen_clk_pins[] = { PIN_BOOT_13 };
+const unsigned int nand_ren_clk_pins[] = { PIN_BOOT_14 };
+const unsigned int nand_dqs_pins[] = { PIN_BOOT_15 };
+const unsigned int nand_ce2_pins[] = { PIN_BOOT_16 };
+const unsigned int nand_ce3_pins[] = { PIN_BOOT_17 };
+
+const unsigned int nor_d_pins[] = { PIN_BOOT_11 };
+const unsigned int nor_q_pins[] = { PIN_BOOT_12 };
+const unsigned int nor_c_pins[] = { PIN_BOOT_13 };
+const unsigned int nor_cs_pins[] = { PIN_BOOT_18 };
+
+/* bank CARD */
+const unsigned int sd_d1_b_pins[] = { PIN_CARD_0 };
+const unsigned int sd_d0_b_pins[] = { PIN_CARD_1 };
+const unsigned int sd_clk_b_pins[] = { PIN_CARD_2 };
+const unsigned int sd_cmd_b_pins[] = { PIN_CARD_3 };
+const unsigned int sd_d3_b_pins[] = { PIN_CARD_4 };
+const unsigned int sd_d2_b_pins[] = { PIN_CARD_5 };
+
+const unsigned int sdxc_d13_b_pins[] = { PIN_CARD_0, PIN_CARD_4, PIN_CARD_5 };
+const unsigned int sdxc_d0_b_pins[] = { PIN_CARD_1 };
+const unsigned int sdxc_clk_b_pins[] = { PIN_CARD_2 };
+const unsigned int sdxc_cmd_b_pins[] = { PIN_CARD_3 };
+
+/* bank AO */
+const unsigned int uart_tx_ao_a_pins[] = { PIN_GPIOAO_0 };
+const unsigned int uart_rx_ao_a_pins[] = { PIN_GPIOAO_1 };
+const unsigned int uart_cts_ao_a_pins[] = { PIN_GPIOAO_2 };
+const unsigned int uart_rts_ao_a_pins[] = { PIN_GPIOAO_3 };
+
+const unsigned int remote_input_pins[] = { PIN_GPIOAO_7 };
+
+const unsigned int i2c_slave_sck_ao_pins[] = { PIN_GPIOAO_4 };
+const unsigned int i2c_slave_sda_ao_pins[] = { PIN_GPIOAO_5 };
+
+const unsigned int uart_tx_ao_b0_pins[] = { PIN_GPIOAO_0 };
+const unsigned int uart_rx_ao_b0_pins[] = { PIN_GPIOAO_1 };
+
+const unsigned int uart_tx_ao_b1_pins[] = { PIN_GPIOAO_4 };
+const unsigned int uart_rx_ao_b1_pins[] = { PIN_GPIOAO_5 };
+
+const unsigned int i2c_mst_sck_ao_pins[] = { PIN_GPIOAO_4 };
+const unsigned int i2c_mst_sda_ao_pins[] = { PIN_GPIOAO_5 };
+
+struct meson_pmx_group meson8_groups[] = {
+ GPIO_GROUP(GPIOX_0),
+ GPIO_GROUP(GPIOX_1),
+ GPIO_GROUP(GPIOX_2),
+ GPIO_GROUP(GPIOX_3),
+ GPIO_GROUP(GPIOX_4),
+ GPIO_GROUP(GPIOX_5),
+ GPIO_GROUP(GPIOX_6),
+ GPIO_GROUP(GPIOX_7),
+ GPIO_GROUP(GPIOX_8),
+ GPIO_GROUP(GPIOX_9),
+ GPIO_GROUP(GPIOX_10),
+ GPIO_GROUP(GPIOX_11),
+ GPIO_GROUP(GPIOX_12),
+ GPIO_GROUP(GPIOX_13),
+ GPIO_GROUP(GPIOX_14),
+ GPIO_GROUP(GPIOX_15),
+ GPIO_GROUP(GPIOX_16),
+ GPIO_GROUP(GPIOX_17),
+ GPIO_GROUP(GPIOX_18),
+ GPIO_GROUP(GPIOX_19),
+ GPIO_GROUP(GPIOX_20),
+ GPIO_GROUP(GPIOX_21),
+ GPIO_GROUP(GPIOY_0),
+ GPIO_GROUP(GPIOY_1),
+ GPIO_GROUP(GPIOY_2),
+ GPIO_GROUP(GPIOY_3),
+ GPIO_GROUP(GPIOY_4),
+ GPIO_GROUP(GPIOY_5),
+ GPIO_GROUP(GPIOY_6),
+ GPIO_GROUP(GPIOY_7),
+ GPIO_GROUP(GPIOY_8),
+ GPIO_GROUP(GPIOY_9),
+ GPIO_GROUP(GPIOY_10),
+ GPIO_GROUP(GPIOY_11),
+ GPIO_GROUP(GPIOY_12),
+ GPIO_GROUP(GPIOY_13),
+ GPIO_GROUP(GPIOY_14),
+ GPIO_GROUP(GPIOY_15),
+ GPIO_GROUP(GPIOY_16),
+ GPIO_GROUP(GPIODV_0),
+ GPIO_GROUP(GPIODV_1),
+ GPIO_GROUP(GPIODV_2),
+ GPIO_GROUP(GPIODV_3),
+ GPIO_GROUP(GPIODV_4),
+ GPIO_GROUP(GPIODV_5),
+ GPIO_GROUP(GPIODV_6),
+ GPIO_GROUP(GPIODV_7),
+ GPIO_GROUP(GPIODV_8),
+ GPIO_GROUP(GPIODV_9),
+ GPIO_GROUP(GPIODV_10),
+ GPIO_GROUP(GPIODV_11),
+ GPIO_GROUP(GPIODV_12),
+ GPIO_GROUP(GPIODV_13),
+ GPIO_GROUP(GPIODV_14),
+ GPIO_GROUP(GPIODV_15),
+ GPIO_GROUP(GPIODV_16),
+ GPIO_GROUP(GPIODV_17),
+ GPIO_GROUP(GPIODV_18),
+ GPIO_GROUP(GPIODV_19),
+ GPIO_GROUP(GPIODV_20),
+ GPIO_GROUP(GPIODV_21),
+ GPIO_GROUP(GPIODV_22),
+ GPIO_GROUP(GPIODV_23),
+ GPIO_GROUP(GPIODV_24),
+ GPIO_GROUP(GPIODV_25),
+ GPIO_GROUP(GPIODV_26),
+ GPIO_GROUP(GPIODV_27),
+ GPIO_GROUP(GPIODV_28),
+ GPIO_GROUP(GPIODV_29),
+ GPIO_GROUP(GPIOH_0),
+ GPIO_GROUP(GPIOH_1),
+ GPIO_GROUP(GPIOH_2),
+ GPIO_GROUP(GPIOH_3),
+ GPIO_GROUP(GPIOH_4),
+ GPIO_GROUP(GPIOH_5),
+ GPIO_GROUP(GPIOH_6),
+ GPIO_GROUP(GPIOH_7),
+ GPIO_GROUP(GPIOH_8),
+ GPIO_GROUP(GPIOH_9),
+ GPIO_GROUP(GPIOZ_0),
+ GPIO_GROUP(GPIOZ_1),
+ GPIO_GROUP(GPIOZ_2),
+ GPIO_GROUP(GPIOZ_3),
+ GPIO_GROUP(GPIOZ_4),
+ GPIO_GROUP(GPIOZ_5),
+ GPIO_GROUP(GPIOZ_6),
+ GPIO_GROUP(GPIOZ_7),
+ GPIO_GROUP(GPIOZ_8),
+ GPIO_GROUP(GPIOZ_9),
+ GPIO_GROUP(GPIOZ_10),
+ GPIO_GROUP(GPIOZ_11),
+ GPIO_GROUP(GPIOZ_12),
+ GPIO_GROUP(GPIOZ_13),
+ GPIO_GROUP(GPIOZ_14),
+ GPIO_GROUP(GPIOAO_0),
+ GPIO_GROUP(GPIOAO_1),
+ GPIO_GROUP(GPIOAO_2),
+ GPIO_GROUP(GPIOAO_3),
+ GPIO_GROUP(GPIOAO_4),
+ GPIO_GROUP(GPIOAO_5),
+ GPIO_GROUP(GPIOAO_6),
+ GPIO_GROUP(GPIOAO_7),
+ GPIO_GROUP(GPIOAO_8),
+ GPIO_GROUP(GPIOAO_9),
+ GPIO_GROUP(GPIOAO_10),
+ GPIO_GROUP(GPIOAO_11),
+ GPIO_GROUP(GPIOAO_12),
+ GPIO_GROUP(GPIOAO_13),
+ GPIO_GROUP(GPIO_BSD_EN),
+ GPIO_GROUP(GPIO_TEST_N),
+
+ /* bank X */
+ GROUP(sd_d0_a, 8, 5),
+ GROUP(sd_d1_a, 8, 4),
+ GROUP(sd_d2_a, 8, 3),
+ GROUP(sd_d3_a, 8, 2),
+ GROUP(sd_clk_a, 8, 1),
+ GROUP(sd_cmd_a, 8, 0),
+
+ GROUP(sdxc_d0_a, 5, 14),
+ GROUP(sdxc_d13_a, 5, 13),
+ GROUP(sdxc_d47_a, 5, 12),
+ GROUP(sdxc_clk_a, 5, 11),
+ GROUP(sdxc_cmd_a, 5, 10),
+
+ GROUP(pcm_out_a, 3, 30),
+ GROUP(pcm_in_a, 3, 29),
+ GROUP(pcm_fs_a, 3, 28),
+ GROUP(pcm_clk_a, 3, 27),
+
+ GROUP(uart_tx_a0, 4, 17),
+ GROUP(uart_rx_a0, 4, 16),
+ GROUP(uart_cts_a0, 4, 15),
+ GROUP(uart_rts_a0, 4, 14),
+
+ GROUP(uart_tx_a1, 4, 13),
+ GROUP(uart_rx_a1, 4, 12),
+ GROUP(uart_cts_a1, 4, 11),
+ GROUP(uart_rts_a1, 4, 10),
+
+ GROUP(uart_tx_b0, 4, 9),
+ GROUP(uart_rx_b0, 4, 8),
+ GROUP(uart_cts_b0, 4, 7),
+ GROUP(uart_rts_b0, 4, 6),
+
+ GROUP(iso7816_det, 4, 21),
+ GROUP(iso7816_reset, 4, 20),
+ GROUP(iso7816_clk, 4, 19),
+ GROUP(iso7816_data, 4, 18),
+
+ GROUP(i2c_sda_d0, 4, 5),
+ GROUP(i2c_sck_d0, 4, 4),
+
+ GROUP(xtal_32k_out, 3, 22),
+ GROUP(xtal_24m_out, 3, 23),
+
+ /* bank Y */
+ GROUP(uart_tx_c, 1, 19),
+ GROUP(uart_rx_c, 1, 18),
+ GROUP(uart_cts_c, 1, 17),
+ GROUP(uart_rts_c, 1, 16),
+
+ GROUP(pcm_out_b, 4, 25),
+ GROUP(pcm_in_b, 4, 24),
+ GROUP(pcm_fs_b, 4, 23),
+ GROUP(pcm_clk_b, 4, 22),
+
+ GROUP(i2c_sda_c0, 1, 15),
+ GROUP(i2c_sck_c0, 1, 14),
+
+ /* bank DV */
+ GROUP(dvin_rgb, 0, 6),
+ GROUP(dvin_vs, 0, 9),
+ GROUP(dvin_hs, 0, 8),
+ GROUP(dvin_clk, 0, 7),
+ GROUP(dvin_de, 0, 10),
+
+ GROUP(enc_0, 7, 0),
+ GROUP(enc_1, 7, 1),
+ GROUP(enc_2, 7, 2),
+ GROUP(enc_3, 7, 3),
+ GROUP(enc_4, 7, 4),
+ GROUP(enc_5, 7, 5),
+ GROUP(enc_6, 7, 6),
+ GROUP(enc_7, 7, 7),
+ GROUP(enc_8, 7, 8),
+ GROUP(enc_9, 7, 9),
+ GROUP(enc_10, 7, 10),
+ GROUP(enc_11, 7, 11),
+ GROUP(enc_12, 7, 12),
+ GROUP(enc_13, 7, 13),
+ GROUP(enc_14, 7, 14),
+ GROUP(enc_15, 7, 15),
+ GROUP(enc_16, 7, 16),
+ GROUP(enc_17, 7, 17),
+
+ GROUP(uart_tx_b1, 6, 23),
+ GROUP(uart_rx_b1, 6, 22),
+ GROUP(uart_cts_b1, 6, 21),
+ GROUP(uart_rts_b1, 6, 20),
+
+ GROUP(vga_vs, 0, 21),
+ GROUP(vga_hs, 0, 20),
+
+ /* bank H */
+ GROUP(hdmi_hpd, 1, 26),
+ GROUP(hdmi_sda, 1, 25),
+ GROUP(hdmi_scl, 1, 24),
+ GROUP(hdmi_cec, 1, 23),
+
+ GROUP(spi_ss0_0, 9, 13),
+ GROUP(spi_miso_0, 9, 12),
+ GROUP(spi_mosi_0, 9, 11),
+ GROUP(spi_sclk_0, 9, 10),
+
+ GROUP(i2c_sda_d1, 4, 3),
+ GROUP(i2c_sck_d1, 4, 2),
+
+ /* bank Z */
+ GROUP(spi_ss0_1, 8, 16),
+ GROUP(spi_ss1_1, 8, 12),
+ GROUP(spi_sclk_1, 8, 15),
+ GROUP(spi_mosi_1, 8, 14),
+ GROUP(spi_miso_1, 8, 13),
+ GROUP(spi_ss2_1, 8, 17),
+
+ GROUP(eth_tx_clk_50m, 6, 15),
+ GROUP(eth_tx_en, 6, 14),
+ GROUP(eth_txd1, 6, 13),
+ GROUP(eth_txd0, 6, 12),
+ GROUP(eth_rx_clk_in, 6, 10),
+ GROUP(eth_rx_dv, 6, 11),
+ GROUP(eth_rxd1, 6, 8),
+ GROUP(eth_rxd0, 6, 7),
+ GROUP(eth_mdio, 6, 6),
+ GROUP(eth_mdc, 6, 5),
+
+ GROUP(i2c_sda_a0, 5, 31),
+ GROUP(i2c_sck_a0, 5, 30),
+
+ GROUP(i2c_sda_b, 5, 27),
+ GROUP(i2c_sck_b, 5, 26),
+
+ GROUP(i2c_sda_c1, 5, 25),
+ GROUP(i2c_sck_c1, 5, 24),
+
+ GROUP(i2c_sda_a1, 5, 9),
+ GROUP(i2c_sck_a1, 5, 8),
+
+ GROUP(i2c_sda_a2, 5, 7),
+ GROUP(i2c_sck_a2, 5, 6),
+
+ /* bank BOOT */
+ GROUP(sd_d0_c, 6, 29),
+ GROUP(sd_d1_c, 6, 28),
+ GROUP(sd_d2_c, 6, 27),
+ GROUP(sd_d3_c, 6, 26),
+ GROUP(sd_cmd_c, 6, 25),
+ GROUP(sd_clk_c, 6, 24),
+
+ GROUP(sdxc_d0_c, 4, 30),
+ GROUP(sdxc_d13_c, 4, 29),
+ GROUP(sdxc_d47_c, 4, 28),
+ GROUP(sdxc_cmd_c, 4, 27),
+ GROUP(sdxc_clk_c, 4, 26),
+
+ GROUP(nand_io, 2, 26),
+ GROUP(nand_io_ce0, 2, 25),
+ GROUP(nand_io_ce1, 2, 24),
+ GROUP(nand_io_rb0, 2, 17),
+ GROUP(nand_ale, 2, 21),
+ GROUP(nand_cle, 2, 20),
+ GROUP(nand_wen_clk, 2, 19),
+ GROUP(nand_ren_clk, 2, 18),
+ GROUP(nand_dqs, 2, 27),
+ GROUP(nand_ce2, 2, 23),
+ GROUP(nand_ce3, 2, 22),
+
+ GROUP(nor_d, 5, 1),
+ GROUP(nor_q, 5, 3),
+ GROUP(nor_c, 5, 2),
+ GROUP(nor_cs, 5, 0),
+
+ /* bank CARD */
+ GROUP(sd_d1_b, 2, 14),
+ GROUP(sd_d0_b, 2, 15),
+ GROUP(sd_clk_b, 2, 11),
+ GROUP(sd_cmd_b, 2, 10),
+ GROUP(sd_d3_b, 2, 12),
+ GROUP(sd_d2_b, 2, 13),
+
+ GROUP(sdxc_d13_b, 2, 6),
+ GROUP(sdxc_d0_b, 2, 7),
+ GROUP(sdxc_clk_b, 2, 5),
+ GROUP(sdxc_cmd_b, 2, 4),
+
+ /* bank AO */
+ GROUP_AO(uart_tx_ao_a, 0, 12),
+ GROUP_AO(uart_rx_ao_a, 0, 11),
+ GROUP_AO(uart_cts_ao_a, 0, 10),
+ GROUP_AO(uart_rts_ao_a, 0, 9),
+
+ GROUP_AO(remote_input, 0, 0),
+
+ GROUP_AO(i2c_slave_sck_ao, 0, 2),
+ GROUP_AO(i2c_slave_sda_ao, 0, 1),
+
+ GROUP_AO(uart_tx_ao_b0, 0, 26),
+ GROUP_AO(uart_rx_ao_b0, 0, 25),
+
+ GROUP_AO(uart_tx_ao_b1, 0, 24),
+ GROUP_AO(uart_rx_ao_b1, 0, 23),
+
+ GROUP_AO(i2c_mst_sck_ao, 0, 6),
+ GROUP_AO(i2c_mst_sda_ao, 0, 5),
+};
+
+const char *gpio_groups[] = {
+ "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3", "GPIOX_4",
+ "GPIOX_5", "GPIOX_6", "GPIOX_7", "GPIOX_8", "GPIOX_9",
+ "GPIOX_10", "GPIOX_11", "GPIOX_12", "GPIOX_13", "GPIOX_14",
+ "GPIOX_15", "GPIOX_16", "GPIOX_17", "GPIOX_18", "GPIOX_19",
+ "GPIOX_20", "GPIOX_21",
+
+ "GPIOY_0", "GPIOY_1", "GPIOY_2", "GPIOY_3", "GPIOY_4",
+ "GPIOY_5", "GPIOY_6", "GPIOY_7", "GPIOY_8", "GPIOY_9",
+ "GPIOY_10", "GPIOY_11", "GPIOY_12", "GPIOY_13", "GPIOY_14",
+ "GPIOY_15", "GPIOY_16",
+
+ "GPIODV_0", "GPIODV_1", "GPIODV_2", "GPIODV_3", "GPIODV_4",
+ "GPIODV_5", "GPIODV_6", "GPIODV_7", "GPIODV_8", "GPIODV_9",
+ "GPIODV_10", "GPIODV_11", "GPIODV_12", "GPIODV_13", "GPIODV_14",
+ "GPIODV_15", "GPIODV_16", "GPIODV_17", "GPIODV_18", "GPIODV_19",
+ "GPIODV_20", "GPIODV_21", "GPIODV_22", "GPIODV_23", "GPIODV_24",
+ "GPIODV_25", "GPIODV_26", "GPIODV_27", "GPIODV_28", "GPIODV_29",
+
+ "GPIOH_0", "GPIOH_1", "GPIOH_2", "GPIOH_3", "GPIOH_4",
+ "GPIOH_5", "GPIOH_6", "GPIOH_7", "GPIOH_8", "GPIOH_9",
+
+ "GPIOZ_0", "GPIOZ_1", "GPIOZ_2", "GPIOZ_3", "GPIOZ_4",
+ "GPIOZ_5", "GPIOZ_6", "GPIOZ_7", "GPIOZ_8", "GPIOZ_9",
+ "GPIOZ_10", "GPIOZ_11", "GPIOZ_12", "GPIOZ_13", "GPIOZ_14",
+
+ "CARD_0", "CARD_1", "CARD_2", "CARD_3", "CARD_4",
+ "CARD_5", "CARD_6",
+
+ "BOOT_0", "BOOT_1", "BOOT_2", "BOOT_3", "BOOT_4",
+ "BOOT_5", "BOOT_6", "BOOT_7", "BOOT_8", "BOOT_9",
+ "BOOT_10", "BOOT_11", "BOOT_12", "BOOT_13", "BOOT_14",
+ "BOOT_15", "BOOT_16", "BOOT_17", "BOOT_18",
+
+ "GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3",
+ "GPIOAO_4", "GPIOAO_5", "GPIOAO_6", "GPIOAO_7",
+ "GPIOAO_8", "GPIOAO_9", "GPIOAO_10", "GPIOAO_11",
+ "GPIOAO_12", "GPIOAO_13", "GPIO_BSD_EN", "GPIO_TEST_N"
+};
+
+const char *sd_a_groups[] = {
+ "sd_d0_a", "sd_d1_a", "sd_d2_a", "sd_d3_a", "sd_clk_a", "sd_cmd_a"
+};
+
+const char *sdxc_a_groups[] = {
+ "sdxc_d0_a", "sdxc_d13_a", "sdxc_d47_a", "sdxc_clk_a", "sdxc_cmd_a"
+};
+
+const char *pcm_a_groups[] = {
+ "pcm_out_a", "pcm_in_a", "pcm_fs_a", "pcm_clk_a"
+};
+
+const char *uart_a_groups[] = {
+ "uart_tx_a0", "uart_rx_a0", "uart_cts_a0", "uart_rts_a0",
+ "uart_tx_a1", "uart_rx_a1", "uart_cts_a1", "uart_rts_a1"
+};
+
+const char *uart_b_groups[] = {
+ "uart_tx_b0", "uart_rx_b0", "uart_cts_b0", "uart_rts_b0",
+ "uart_tx_b1", "uart_rx_b1", "uart_cts_b1", "uart_rts_b1"
+};
+
+const char *iso7816_groups[] = {
+ "iso7816_det", "iso7816_reset", "iso7816_clk", "iso7816_data"
+};
+
+const char *i2c_d_groups[] = {
+ "i2c_sda_d0", "i2c_sck_d0", "i2c_sda_d1", "i2c_sck_d1"
+};
+
+const char *xtal_groups[] = {
+ "xtal_32k_out", "xtal_24m_out"
+};
+
+const char *uart_c_groups[] = {
+ "uart_tx_c", "uart_rx_c", "uart_cts_c", "uart_rts_c"
+};
+
+const char *pcm_b_groups[] = {
+ "pcm_out_b", "pcm_in_b", "pcm_fs_b", "pcm_clk_b"
+};
+
+const char *i2c_c_groups[] = {
+ "i2c_sda_c0", "i2c_sck_c0", "i2c_sda_c1", "i2c_sck_c1"
+};
+
+const char *dvin_groups[] = {
+ "dvin_rgb", "dvin_vs", "dvin_hs", "dvin_clk", "dvin_de"
+};
+
+const char *enc_groups[] = {
+ "enc_0", "enc_1", "enc_2", "enc_3", "enc_4", "enc_5",
+ "enc_6", "enc_7", "enc_8", "enc_9", "enc_10", "enc_11",
+ "enc_12", "enc_13", "enc_14", "enc_15", "enc_16", "enc_17"
+};
+
+const char *vga_groups[] = {
+ "vga_vs", "vga_hs"
+};
+
+const char *hdmi_groups[] = {
+ "hdmi_hpd", "hdmi_sda", "hdmi_scl", "hdmi_cec"
+};
+
+const char *spi_groups[] = {
+ "spi_ss0_0", "spi_miso_0", "spi_mosi_0", "spi_sclk_0",
+ "spi_ss0_1", "spi_ss1_1", "spi_sclk_1", "spi_mosi_1",
+ "spi_miso_1", "spi_ss2_1"
+};
+
+const char *ethernet_groups[] = {
+ "eth_tx_clk_50m", "eth_tx_en", "eth_txd1",
+ "eth_txd0", "eth_rx_clk_in", "eth_rx_dv",
+ "eth_rxd1", "eth_rxd0", "eth_mdio", "eth_mdc"
+};
+
+const char *i2c_a_groups[] = {
+ "i2c_sda_a0", "i2c_sck_a0", "i2c_sda_a1", "i2c_sck_a1",
+ "i2c_sda_a2", "i2c_sck_a2"
+};
+
+const char *i2c_b_groups[] = {
+ "i2c_sda_b", "i2c_sck_b"
+};
+
+const char *sd_c_groups[] = {
+ "sd_d0_c", "sd_d1_c" "sd_d2_c", "sd_d3_c",
+ "sd_cmd_c", "sd_clk_c"
+};
+
+const char *sdxc_c_groups[] = {
+ "sdxc_d0_c", "sdxc_d13_c", "sdxc_d47_c", "sdxc_cmd_c",
+ "sdxc_clk_c"
+};
+
+const char *nand_groups[] = {
+ "nand_io", "nand_io_ce0", "nand_io_ce1",
+ "nand_io_rb0", "nand_ale", "nand_cle",
+ "nand_wen_clk", "nand_ren_clk", "nand_dqs",
+ "nand_ce2", "nand_ce3"
+};
+
+const char *nor_groups[] = {
+ "nor_d", "nor_q", "nor_c", "nor_cs"
+};
+
+const char *sd_b_groups[] = {
+ "sd_d1_b", "sd_d0_b", "sd_clk_b", "sd_cmd_b",
+ "sd_d3_b", "sd_d2_b"
+};
+
+const char *sdxc_b_groups[] = {
+ "sdxc_d13_b", "sdxc_d0_b", "sdxc_clk_b", "sdxc_cmd_b"
+};
+
+const char *uart_ao_groups[] = {
+ "uart_tx_ao_a", "uart_rx_ao_a", "uart_cts_ao_a", "uart_rts_ao_a"
+};
+
+const char *remote_groups[] = {
+ "remote_input"
+};
+
+const char *i2c_slave_ao_groups[] = {
+ "i2c_slave_sck_ao", "i2c_slave_sda_ao"
+};
+
+const char *uart_ao_b_groups[] = {
+ "uart_tx_ao_b0", "uart_rx_ao_b0", "uart_tx_ao_b1", "uart_rx_ao_b1"
+};
+
+const char *i2c_mst_ao_groups[] = {
+ "i2c_mst_sck_ao", "i2c_mst_sda_ao"
+};
+
+struct meson_pmx_func meson8_functions[] = {
+ FUNCTION(gpio),
+ FUNCTION(sd_a),
+ FUNCTION(sdxc_a),
+ FUNCTION(pcm_a),
+ FUNCTION(uart_a),
+ FUNCTION(uart_b),
+ FUNCTION(iso7816),
+ FUNCTION(i2c_d),
+ FUNCTION(xtal),
+ FUNCTION(uart_c),
+ FUNCTION(pcm_b),
+ FUNCTION(i2c_c),
+ FUNCTION(dvin),
+ FUNCTION(enc),
+ FUNCTION(vga),
+ FUNCTION(hdmi),
+ FUNCTION(spi),
+ FUNCTION(ethernet),
+ FUNCTION(i2c_a),
+ FUNCTION(i2c_b),
+ FUNCTION(sd_c),
+ FUNCTION(sdxc_c),
+ FUNCTION(nand),
+ FUNCTION(nor),
+ FUNCTION(sd_b),
+ FUNCTION(sdxc_b),
+ FUNCTION(uart_ao),
+ FUNCTION(remote),
+ FUNCTION(i2c_slave_ao),
+ FUNCTION(uart_ao_b),
+ FUNCTION(i2c_mst_ao),
+};
+
+struct meson_bank meson8_banks[] = {
+ /* name first last pullen pull dir out in */
+ BANK("X", PIN_GPIOX_0, PIN_GPIOX_21, 4, 0, 4, 0, 0, 0, 1, 0, 2, 0),
+ BANK("Y", PIN_GPIOY_0, PIN_GPIOY_16, 3, 0, 3, 0, 3, 0, 4, 0, 5, 0),
+ BANK("DV", PIN_GPIODV_0, PIN_GPIODV_29, 0, 0, 0, 0, 7, 0, 8, 0, 9, 0),
+ BANK("H", PIN_GPIOH_0, PIN_GPIOH_9, 1, 16, 1, 16, 9, 19, 10, 19, 11, 19),
+ BANK("Z", PIN_GPIOZ_0, PIN_GPIOZ_14, 1, 0, 1, 0, 3, 17, 4, 17, 5, 17),
+ BANK("CARD", PIN_CARD_0, PIN_CARD_6, 2, 20, 2, 20, 0, 22, 1, 22, 2, 22),
+ BANK("BOOT", PIN_BOOT_0, PIN_BOOT_18, 2, 0, 2, 0, 9, 0, 10, 0, 11, 0),
+};
+
+struct meson_bank meson8_ao_banks[] = {
+ /* name first last pullen pull dir out in */
+ BANK("AO", PIN_GPIOAO_0, PIN_GPIO_TEST_N, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
+};
+
+struct meson_domain_data meson8_domain_data[] = {
+ {
+ .name = "banks",
+ .banks = meson8_banks,
+ .num_banks = ARRAY_SIZE(meson8_banks),
+ .pin_base = 0,
+ .num_pins = 120,
+ },
+ {
+ .name = "ao-bank",
+ .banks = meson8_ao_banks,
+ .num_banks = ARRAY_SIZE(meson8_ao_banks),
+ .pin_base = 120,
+ .num_pins = 16,
+ },
+};
+
+struct meson_pinctrl_data meson8_pinctrl_data = {
+ .pins = meson8_pins,
+ .groups = meson8_groups,
+ .funcs = meson8_functions,
+ .domain_data = meson8_domain_data,
+ .num_pins = ARRAY_SIZE(meson8_pins),
+ .num_groups = ARRAY_SIZE(meson8_groups),
+ .num_funcs = ARRAY_SIZE(meson8_functions),
+ .num_domains = ARRAY_SIZE(meson8_domain_data),
+};
diff --git a/include/dt-bindings/gpio/meson8-gpio.h b/include/dt-bindings/gpio/meson8-gpio.h
new file mode 100644
index 0000000..fdaeb5c
--- /dev/null
+++ b/include/dt-bindings/gpio/meson8-gpio.h
@@ -0,0 +1,157 @@
+/*
+ * GPIO definitions for Amlogic Meson8 SoCs
+ *
+ * Copyright (C) 2014 Beniamino Galvani <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _DT_BINDINGS_MESON8_GPIO_H
+#define _DT_BINDINGS_MESON8_GPIO_H
+
+/* First GPIO chip */
+#define GPIOX_0 0
+#define GPIOX_1 1
+#define GPIOX_2 2
+#define GPIOX_3 3
+#define GPIOX_4 4
+#define GPIOX_5 5
+#define GPIOX_6 6
+#define GPIOX_7 7
+#define GPIOX_8 8
+#define GPIOX_9 9
+#define GPIOX_10 10
+#define GPIOX_11 11
+#define GPIOX_12 12
+#define GPIOX_13 13
+#define GPIOX_14 14
+#define GPIOX_15 15
+#define GPIOX_16 16
+#define GPIOX_17 17
+#define GPIOX_18 18
+#define GPIOX_19 19
+#define GPIOX_20 20
+#define GPIOX_21 21
+#define GPIOY_0 22
+#define GPIOY_1 23
+#define GPIOY_2 24
+#define GPIOY_3 25
+#define GPIOY_4 26
+#define GPIOY_5 27
+#define GPIOY_6 28
+#define GPIOY_7 29
+#define GPIOY_8 30
+#define GPIOY_9 31
+#define GPIOY_10 32
+#define GPIOY_11 33
+#define GPIOY_12 34
+#define GPIOY_13 35
+#define GPIOY_14 36
+#define GPIOY_15 37
+#define GPIOY_16 38
+#define GPIODV_0 39
+#define GPIODV_1 40
+#define GPIODV_2 41
+#define GPIODV_3 42
+#define GPIODV_4 43
+#define GPIODV_5 44
+#define GPIODV_6 45
+#define GPIODV_7 46
+#define GPIODV_8 47
+#define GPIODV_9 48
+#define GPIODV_10 49
+#define GPIODV_11 50
+#define GPIODV_12 51
+#define GPIODV_13 52
+#define GPIODV_14 53
+#define GPIODV_15 54
+#define GPIODV_16 55
+#define GPIODV_17 56
+#define GPIODV_18 57
+#define GPIODV_19 58
+#define GPIODV_20 59
+#define GPIODV_21 60
+#define GPIODV_22 61
+#define GPIODV_23 62
+#define GPIODV_24 63
+#define GPIODV_25 64
+#define GPIODV_26 65
+#define GPIODV_27 66
+#define GPIODV_28 67
+#define GPIODV_29 68
+#define GPIOH_0 69
+#define GPIOH_1 70
+#define GPIOH_2 71
+#define GPIOH_3 72
+#define GPIOH_4 73
+#define GPIOH_5 74
+#define GPIOH_6 75
+#define GPIOH_7 76
+#define GPIOH_8 77
+#define GPIOH_9 78
+#define GPIOZ_0 79
+#define GPIOZ_1 80
+#define GPIOZ_2 81
+#define GPIOZ_3 82
+#define GPIOZ_4 83
+#define GPIOZ_5 84
+#define GPIOZ_6 85
+#define GPIOZ_7 86
+#define GPIOZ_8 87
+#define GPIOZ_9 88
+#define GPIOZ_10 89
+#define GPIOZ_11 90
+#define GPIOZ_12 91
+#define GPIOZ_13 92
+#define GPIOZ_14 93
+#define CARD_0 94
+#define CARD_1 95
+#define CARD_2 96
+#define CARD_3 97
+#define CARD_4 98
+#define CARD_5 99
+#define CARD_6 100
+#define BOOT_0 101
+#define BOOT_1 102
+#define BOOT_2 103
+#define BOOT_3 104
+#define BOOT_4 105
+#define BOOT_5 106
+#define BOOT_6 107
+#define BOOT_7 108
+#define BOOT_8 109
+#define BOOT_9 110
+#define BOOT_10 111
+#define BOOT_11 112
+#define BOOT_12 113
+#define BOOT_13 114
+#define BOOT_14 115
+#define BOOT_15 116
+#define BOOT_16 117
+#define BOOT_17 118
+#define BOOT_18 119
+
+/* Second GPIO chip */
+#define GPIOAO_0 0
+#define GPIOAO_1 1
+#define GPIOAO_2 2
+#define GPIOAO_3 3
+#define GPIOAO_4 4
+#define GPIOAO_5 5
+#define GPIOAO_6 6
+#define GPIOAO_7 7
+#define GPIOAO_8 8
+#define GPIOAO_9 9
+#define GPIOAO_10 10
+#define GPIOAO_11 11
+#define GPIOAO_12 12
+#define GPIOAO_13 13
+#define GPIO_BSD_EN 14
+#define GPIO_TEST_N 15
+
+#endif /* _DT_BINDINGS_MESON8_GPIO_H */
--
1.9.1
Make sure that the Meson pinctrl driver is built whenever Meson
support is enabled.
Signed-off-by: Beniamino Galvani <[email protected]>
---
arch/arm/mach-meson/Kconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index 2c1154e..1828711 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -1,7 +1,10 @@
menuconfig ARCH_MESON
bool "Amlogic Meson SoCs" if ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_IRQ_CHIP
select ARM_GIC
+ select PINCTRL
+ select PINCTRL_MESON
if ARCH_MESON
--
1.9.1
Hi Beniamino,
On Sun, 2014-11-16 at 09:14PM +0100, Beniamino Galvani wrote:
> Hi,
>
> this is the third version of the pinctrl driver for Amlogic Meson. It
> provides a common infrastructure than can be used by all the SoCs of
> the family and configuration data specific for Meson8. Adding support
> for other SoCs should be only matter of defining new pins and banks.
>
> The driver uses generic DT properties for the definition of mux and
> configuration nodes; since there is an ongoing effort to centralize
> the parsing to generic code, I've reused the patch "pinctrl:
> pinconf-generic: Infer map type from DT property" [1] posted a few
> days ago by Soren Brinkmann. I will update the series if that patch is
> going to change after the mailing list discussion.
Looks really nice to me and it's great that you use my patch as basis.
Looks like it works for more people than just me :)
I hope we can convince Linus to take that patch more or less as is. Even
though "kludgy" I don't see an easy way for addressing Linus' comments
without breaking current users of the interface. It may be easier/better
to gradually migrate to the newly defined bindings and remove the
kludgyness as user that rely on the current behavior disappear.
Thanks,
Sören
On Sun, Nov 16, 2014 at 9:14 PM, Beniamino Galvani <[email protected]> wrote:
> Add device tree bindings documentation for Amlogic Meson pin and GPIO
> controller.
>
> Signed-off-by: Beniamino Galvani <[email protected]>
This is exactly how I want modern pin controller bindings to look
when combining groups and functions, so patch applied.
Now let me look at the driver!
Yours,
Linus Walleij
On Sun, Nov 16, 2014 at 9:14 PM, Beniamino Galvani <[email protected]> wrote:
> This is a driver for the pinmux and GPIO controller available in
> Amlogic Meson SoCs. At the moment it only supports Meson8 devices,
> however other SoC families like Meson6 and Meson8b (the Cortex-A5
> variant) appear to be similar, with just different sets of banks and
> registers.
>
> GPIO interrupts are not supported at the moment due to lack of
> documentation.
>
> Signed-off-by: Beniamino Galvani <[email protected]>
This is dependent on Sören's patches I guess?
OK I'll merge this once we have that other code sorted out.
Yours,
Linus Walleij
On Sun, Nov 16, 2014 at 9:14 PM, Beniamino Galvani <[email protected]> wrote:
> Make sure that the Meson pinctrl driver is built whenever Meson
> support is enabled.
>
> Signed-off-by: Beniamino Galvani <[email protected]>
Acked-by: Linus Walleij <[email protected]>
(Given we can merge the pinctrl driver)
Please merge this through the ARM SoC tree.
Yours,
Linus Walleij
On Thu, Nov 27, 2014 at 02:48:31PM +0100, Linus Walleij wrote:
> On Sun, Nov 16, 2014 at 9:14 PM, Beniamino Galvani <[email protected]> wrote:
>
> > This is a driver for the pinmux and GPIO controller available in
> > Amlogic Meson SoCs. At the moment it only supports Meson8 devices,
> > however other SoC families like Meson6 and Meson8b (the Cortex-A5
> > variant) appear to be similar, with just different sets of banks and
> > registers.
> >
> > GPIO interrupts are not supported at the moment due to lack of
> > documentation.
> >
> > Signed-off-by: Beniamino Galvani <[email protected]>
>
> This is dependent on S?ren's patches I guess?
>
> OK I'll merge this once we have that other code sorted out.
Yes, this depends on Soren's patches.
Thanks,
Beniamino