To support all kinds of frequency requirement for HDMI on rk3288,
we need a PLL that can change rate at run time.
There are some discussion before at [0], I think we can just leave
the npll for HDMI(DCLK_VOP0) used to make it simple.
Comments are welcome.
[0] https://lkml.org/lkml/2014/11/4/58
Kever Yang (2):
clk: rockchip: leave npll for VOP0 only
arm: dts: rockchip: select npll as parent of DCLK_VOP0
arch/arm/boot/dts/rk3288.dtsi | 2 ++
drivers/clk/rockchip/clk-rk3288.c | 24 ++++++++++++------------
2 files changed, 14 insertions(+), 12 deletions(-)
--
1.9.1
We will need a pll to support all kinds of clock rate requirement
for HDMI(from DCLK_VOP0) which may change the rate at run time.
In order not to affect other clocks, remove the npll from the
parent list of other clocks and only DCLK_VOP0 can select npll
as parent.
Signed-off-by: Kever Yang <[email protected]>
---
drivers/clk/rockchip/clk-rk3288.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index b4a74c2..6eb1407 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -174,7 +174,7 @@ PNAME(mux_ddrphy_p) = { "dpll_ddr", "gpll_ddr" };
PNAME(mux_aclk_cpu_src_p) = { "cpll_aclk_cpu", "gpll_aclk_cpu" };
PNAME(mux_pll_src_cpll_gpll_p) = { "cpll", "gpll" };
-PNAME(mux_pll_src_npll_cpll_gpll_p) = { "npll", "cpll", "gpll" };
+PNAME(mux_pll_src_npll_cpll_gpll_p) = { "dummy", "cpll", "gpll" };
PNAME(mux_pll_src_cpll_gpll_npll_p) = { "cpll", "gpll", "npll" };
PNAME(mux_pll_src_cpll_gpll_usb480m_p) = { "cpll", "gpll", "usbphy480m_src" };
PNAME(mux_pll_src_cpll_gll_usb_npll_p) = { "cpll", "gpll", "usbphy480m_src", "npll" };
@@ -392,24 +392,24 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
RK3288_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(3), 4, GFLAGS),
- COMPOSITE(DCLK_VOP0, "dclk_vop0", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(DCLK_VOP0, "dclk_vop0", mux_pll_src_cpll_gpll_npll_p, CLK_SET_RATE_PARENT,
RK3288_CLKSEL_CON(27), 0, 2, MFLAGS, 8, 8, DFLAGS,
RK3288_CLKGATE_CON(3), 1, GFLAGS),
- COMPOSITE(DCLK_VOP1, "dclk_vop1", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(DCLK_VOP1, "dclk_vop1", mux_pll_src_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(29), 6, 2, MFLAGS, 8, 8, DFLAGS,
RK3288_CLKGATE_CON(3), 3, GFLAGS),
COMPOSITE_NODIV(SCLK_EDP_24M, "sclk_edp_24m", mux_edp_24m_p, 0,
RK3288_CLKSEL_CON(28), 15, 1, MFLAGS,
RK3288_CLKGATE_CON(3), 12, GFLAGS),
- COMPOSITE(SCLK_EDP, "sclk_edp", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_EDP, "sclk_edp", mux_pll_src_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(28), 6, 2, MFLAGS, 0, 6, DFLAGS,
RK3288_CLKGATE_CON(3), 13, GFLAGS),
- COMPOSITE(SCLK_ISP, "sclk_isp", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_ISP, "sclk_isp", mux_pll_src_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(6), 6, 2, MFLAGS, 0, 6, DFLAGS,
RK3288_CLKGATE_CON(3), 14, GFLAGS),
- COMPOSITE(SCLK_ISP_JPE, "sclk_isp_jpe", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_ISP_JPE, "sclk_isp_jpe", mux_pll_src_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(6), 14, 2, MFLAGS, 8, 6, DFLAGS,
RK3288_CLKGATE_CON(3), 15, GFLAGS),
@@ -418,16 +418,16 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
GATE(SCLK_HDMI_CEC, "sclk_hdmi_cec", "xin32k", 0,
RK3288_CLKGATE_CON(5), 11, GFLAGS),
- COMPOSITE(ACLK_HEVC, "aclk_hevc", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(ACLK_HEVC, "aclk_hevc", mux_pll_src_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(39), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(13), 13, GFLAGS),
DIV(HCLK_HEVC, "hclk_hevc", "aclk_hevc", 0,
RK3288_CLKSEL_CON(40), 12, 2, DFLAGS),
- COMPOSITE(SCLK_HEVC_CABAC, "sclk_hevc_cabac", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_HEVC_CABAC, "sclk_hevc_cabac", mux_pll_src_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(42), 6, 2, MFLAGS, 0, 5, DFLAGS,
RK3288_CLKGATE_CON(13), 14, GFLAGS),
- COMPOSITE(SCLK_HEVC_CORE, "sclk_hevc_core", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_HEVC_CORE, "sclk_hevc_core", mux_pll_src_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(42), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(13), 15, GFLAGS),
@@ -443,7 +443,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
RK3288_CLKSEL_CON(33), 0, 5, DFLAGS,
RK3288_CLKGATE_CON(5), 8, GFLAGS),
- COMPOSITE(SCLK_GPU, "sclk_gpu", mux_pll_src_cpll_gll_usb_npll_p, 0,
+ COMPOSITE(SCLK_GPU, "sclk_gpu", mux_pll_src_cpll_gpll_usb480m_p, 0,
RK3288_CLKSEL_CON(34), 6, 2, MFLAGS, 0, 5, DFLAGS,
RK3288_CLKGATE_CON(5), 7, GFLAGS),
@@ -489,7 +489,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
COMPOSITE(0, "sclk_tspout", mux_tspout_p, 0,
RK3288_CLKSEL_CON(35), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(4), 11, GFLAGS),
- COMPOSITE(0, "sclk_tsp", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(0, "sclk_tsp", mux_pll_src_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(35), 6, 2, MFLAGS, 0, 5, DFLAGS,
RK3288_CLKGATE_CON(4), 10, GFLAGS),
@@ -520,7 +520,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
RK3288_CLKSEL_CON(38), 15, 1, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(5), 6, GFLAGS),
- COMPOSITE(0, "uart0_src", mux_pll_src_cpll_gll_usb_npll_p, 0,
+ COMPOSITE(0, "uart0_src", mux_pll_src_cpll_gpll_usb480m_p, 0,
RK3288_CLKSEL_CON(13), 13, 2, MFLAGS, 0, 7, DFLAGS,
RK3288_CLKGATE_CON(1), 8, GFLAGS),
COMPOSITE_FRAC(0, "uart0_frac", "uart0_src", 0,
--
1.9.1
The DCLK_VOP0 will change the parent clock's rate, we don't want
to change the PLLs rate other than npll. So we select the npll
as parent directly.
Signed-off-by: Kever Yang <[email protected]>
---
arch/arm/boot/dts/rk3288.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index c3190f7..6ea6125 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -573,6 +573,8 @@
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ assigned-clocks = <&cru DCLK_VOP0>;
+ assigned-clock-parents = <3>;
resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopb_mmu>;
--
1.9.1