From: Kan Liang <[email protected]>
This is the user space patch for Haswell LBR call stack support.
For many profiling tasks we need the callgraph. For example we often
need to see the caller of a lock or the caller of a memcpy or other
library function to actually tune the program. Frame pointer unwinding
is efficient and works well. But frame pointers are off by default on
64bit code (and on modern 32bit gccs), so there are many binaries around
that do not use frame pointers. Profiling unchanged production code is
very useful in practice. On some CPUs frame pointer also has a high
cost. Dwarf2 unwinding also does not always work and is extremely slow
(upto 20% overhead).
Haswell has a new feature that utilizes the existing Last Branch Record
facility to record call chains. When the feature is enabled, function
call will be collected as normal, but as return instructions are
executed the last captured branch record is popped from the on-chip LBR
registers. The LBR call stack facility provides an alternative to get
callgraph. It has some limitations too, but should work in most cases
and is significantly faster than dwarf. Frame pointer unwinding is still
the best default, but LBR call stack is a good alternative when nothing
else works.
Changes since v1
- Update help document
- Force exclude_user to 0 with warning in LBR call stack
- Dump both lbr and fp info when report -D
- Reconstruct thread__resolve_callchain_sample and split it into two patches
- Use has_branch_callstack function to check LBR call stack available
Changes since v2
- Rebase to 025ce5d33373
Changes since v3
- Rebase to cc502c23aadf
- Separated function for lbr call stack sample resolve and print
- Some minor changes according to comments
Kan Liang (3):
perf tools: enable LBR call stack support
perf tool: Move cpumode resolve code to add_callchain_ip
perf tools: Construct LBR call chain
tools/perf/Documentation/perf-record.txt | 8 +-
tools/perf/builtin-record.c | 6 +-
tools/perf/builtin-report.c | 2 +
tools/perf/util/callchain.c | 10 +-
tools/perf/util/callchain.h | 1 +
tools/perf/util/evsel.c | 21 +++-
tools/perf/util/evsel.h | 4 +
tools/perf/util/machine.c | 174 ++++++++++++++++++++++---------
tools/perf/util/session.c | 64 ++++++++++--
9 files changed, 229 insertions(+), 61 deletions(-)
--
1.8.3.2
From: Kan Liang <[email protected]>
Using flag to distinguish between branch_history and normal callchain.
Move the cpumode to add_callchain_ip function.
No change in behavior.
Signed-off-by: Kan Liang <[email protected]>
---
tools/perf/util/machine.c | 72 +++++++++++++++++++++++------------------------
1 file changed, 35 insertions(+), 37 deletions(-)
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index 5c4d7f8..7fd3cf2 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -1385,19 +1385,46 @@ struct mem_info *sample__resolve_mem(struct perf_sample *sample,
static int add_callchain_ip(struct thread *thread,
struct symbol **parent,
struct addr_location *root_al,
- int cpumode,
+ bool branch_history,
u64 ip)
{
struct addr_location al;
al.filtered = 0;
al.sym = NULL;
- if (cpumode == -1)
+ if (branch_history)
thread__find_cpumode_addr_location(thread, MAP__FUNCTION,
ip, &al);
- else
+ else {
+ u8 cpumode = PERF_RECORD_MISC_USER;
+
+ if (ip >= PERF_CONTEXT_MAX) {
+ switch (ip) {
+ case PERF_CONTEXT_HV:
+ cpumode = PERF_RECORD_MISC_HYPERVISOR;
+ break;
+ case PERF_CONTEXT_KERNEL:
+ cpumode = PERF_RECORD_MISC_KERNEL;
+ break;
+ case PERF_CONTEXT_USER:
+ cpumode = PERF_RECORD_MISC_USER;
+ break;
+ default:
+ pr_debug("invalid callchain context: "
+ "%"PRId64"\n", (s64) ip);
+ /*
+ * It seems the callchain is corrupted.
+ * Discard all.
+ */
+ callchain_cursor_reset(&callchain_cursor);
+ return 1;
+ }
+ return 0;
+ }
thread__find_addr_location(thread, cpumode, MAP__FUNCTION,
ip, &al);
+ }
+
if (al.sym != NULL) {
if (sort__has_parent && !*parent &&
symbol__match_regex(al.sym, &parent_regex))
@@ -1480,11 +1507,8 @@ static int thread__resolve_callchain_sample(struct thread *thread,
struct addr_location *root_al,
int max_stack)
{
- u8 cpumode = PERF_RECORD_MISC_USER;
int chain_nr = min(max_stack, (int)chain->nr);
- int i;
- int j;
- int err;
+ int i, j, err;
int skip_idx = -1;
int first_call = 0;
@@ -1542,10 +1566,10 @@ static int thread__resolve_callchain_sample(struct thread *thread,
for (i = 0; i < nr; i++) {
err = add_callchain_ip(thread, parent, root_al,
- -1, be[i].to);
+ true, be[i].to);
if (!err)
err = add_callchain_ip(thread, parent, root_al,
- -1, be[i].from);
+ true, be[i].from);
if (err == -EINVAL)
break;
if (err)
@@ -1574,36 +1598,10 @@ check_calls:
#endif
ip = chain->ips[j];
- if (ip >= PERF_CONTEXT_MAX) {
- switch (ip) {
- case PERF_CONTEXT_HV:
- cpumode = PERF_RECORD_MISC_HYPERVISOR;
- break;
- case PERF_CONTEXT_KERNEL:
- cpumode = PERF_RECORD_MISC_KERNEL;
- break;
- case PERF_CONTEXT_USER:
- cpumode = PERF_RECORD_MISC_USER;
- break;
- default:
- pr_debug("invalid callchain context: "
- "%"PRId64"\n", (s64) ip);
- /*
- * It seems the callchain is corrupted.
- * Discard all.
- */
- callchain_cursor_reset(&callchain_cursor);
- return 0;
- }
- continue;
- }
+ err = add_callchain_ip(thread, parent, root_al, false, ip);
- err = add_callchain_ip(thread, parent, root_al,
- cpumode, ip);
- if (err == -EINVAL)
- break;
if (err)
- return err;
+ return (err < 0) ? err : 0;
}
return 0;
--
1.8.3.2
From: Kan Liang <[email protected]>
Currently, there are two call chain recording options, fp and dwarf.
Haswell has a new feature that utilizes the existing LBR facility to
record call chains. So it provides the third options to record call
chain. This patch enables the lbr call stack support.
LBR call stack has some limitations. It reuses current LBR facility, so
LBR call stack and branch record can not be enabled at the same time. It
is only available for user callchain.
However, LBR call stack can work on the user app which doesn't have
frame-pointer or dwarf debug info compiled. It is a good alternative
when nothing else works.
Signed-off-by: Kan Liang <[email protected]>
---
tools/perf/Documentation/perf-record.txt | 8 +++++++-
tools/perf/builtin-record.c | 6 +++---
tools/perf/builtin-report.c | 2 ++
tools/perf/util/callchain.c | 10 +++++++++-
tools/perf/util/callchain.h | 1 +
tools/perf/util/evsel.c | 21 +++++++++++++++++++--
6 files changed, 41 insertions(+), 7 deletions(-)
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
index 398f8d5..03d9939 100644
--- a/tools/perf/Documentation/perf-record.txt
+++ b/tools/perf/Documentation/perf-record.txt
@@ -100,13 +100,19 @@ OPTIONS
implies -g.
Allows specifying "fp" (frame pointer) or "dwarf"
- (DWARF's CFI - Call Frame Information) as the method to collect
+ (DWARF's CFI - Call Frame Information) or "lbr"
+ (Hardware Last Branch Record facility) as the method to collect
the information used to show the call graphs.
In some systems, where binaries are build with gcc
--fomit-frame-pointer, using the "fp" method will produce bogus
call graphs, using "dwarf", if available (perf tools linked to
the libunwind library) should be used instead.
+ Using the "lbr" method doesn't require any compiler options. It
+ will produce call graphs from the hardware LBR registers. The
+ main limition is that it is only available on new Intel
+ platforms, such as Haswell. It can only get user call chain. It
+ doesn't work with branch stack sampling at the same time.
-q::
--quiet::
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 582c4da..e486627 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -639,7 +639,7 @@ error:
static void callchain_debug(void)
{
- static const char *str[CALLCHAIN_MAX] = { "NONE", "FP", "DWARF" };
+ static const char *str[CALLCHAIN_MAX] = { "NONE", "FP", "DWARF", "LBR" };
pr_debug("callchain: type %s\n", str[callchain_param.record_mode]);
@@ -725,9 +725,9 @@ static struct record record = {
#define CALLCHAIN_HELP "setup and enables call-graph (stack chain/backtrace) recording: "
#ifdef HAVE_DWARF_UNWIND_SUPPORT
-const char record_callchain_help[] = CALLCHAIN_HELP "fp dwarf";
+const char record_callchain_help[] = CALLCHAIN_HELP "fp dwarf lbr";
#else
-const char record_callchain_help[] = CALLCHAIN_HELP "fp";
+const char record_callchain_help[] = CALLCHAIN_HELP "fp lbr";
#endif
/*
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index fb272ff..ebbf3f7 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -262,6 +262,8 @@ static int report__setup_sample_type(struct report *rep)
if ((sample_type & PERF_SAMPLE_REGS_USER) &&
(sample_type & PERF_SAMPLE_STACK_USER))
callchain_param.record_mode = CALLCHAIN_DWARF;
+ else if (sample_type & PERF_SAMPLE_BRANCH_STACK)
+ callchain_param.record_mode = CALLCHAIN_LBR;
else
callchain_param.record_mode = CALLCHAIN_FP;
}
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index cf524a3..64c8913 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -77,7 +77,7 @@ int parse_callchain_record_opt(const char *arg)
ret = 0;
} else
pr_err("callchain: No more arguments "
- "needed for -g fp\n");
+ "needed for --call-graph fp\n");
break;
#ifdef HAVE_DWARF_UNWIND_SUPPORT
@@ -97,6 +97,14 @@ int parse_callchain_record_opt(const char *arg)
callchain_param.dump_size = size;
}
#endif /* HAVE_DWARF_UNWIND_SUPPORT */
+ } else if (!strncmp(name, "lbr", sizeof("lbr"))) {
+ if (!strtok_r(NULL, ",", &saveptr)) {
+ callchain_param.record_mode = CALLCHAIN_LBR;
+ ret = 0;
+ } else
+ pr_err("callchain: No more arguments "
+ "needed for --call-graph lbr\n");
+ break;
} else {
pr_err("callchain: Unknown --call-graph option "
"value: %s\n", arg);
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index dbc08cf..b4b61d1 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -11,6 +11,7 @@ enum perf_call_graph_mode {
CALLCHAIN_NONE,
CALLCHAIN_FP,
CALLCHAIN_DWARF,
+ CALLCHAIN_LBR,
CALLCHAIN_MAX
};
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 12b4396..7cbe2e9 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -537,13 +537,30 @@ int perf_evsel__group_desc(struct perf_evsel *evsel, char *buf, size_t size)
}
static void
-perf_evsel__config_callgraph(struct perf_evsel *evsel)
+perf_evsel__config_callgraph(struct perf_evsel *evsel,
+ struct record_opts *opts)
{
bool function = perf_evsel__is_function_event(evsel);
struct perf_event_attr *attr = &evsel->attr;
perf_evsel__set_sample_bit(evsel, CALLCHAIN);
+ if (callchain_param.record_mode == CALLCHAIN_LBR) {
+ if (!opts->branch_stack) {
+ perf_evsel__set_sample_bit(evsel, BRANCH_STACK);
+ attr->branch_sample_type = PERF_SAMPLE_BRANCH_USER |
+ PERF_SAMPLE_BRANCH_CALL_STACK;
+ if (attr->exclude_user) {
+ attr->exclude_user = 0;
+
+ pr_warning("LBR callstack option is only available"
+ " to get user callchain information."
+ " Force exclude_user to 0.\n");
+ }
+ } else
+ pr_info("Cannot use LBR callstack with branch stack\n");
+ }
+
if (callchain_param.record_mode == CALLCHAIN_DWARF) {
if (!function) {
perf_evsel__set_sample_bit(evsel, REGS_USER);
@@ -659,7 +676,7 @@ void perf_evsel__config(struct perf_evsel *evsel, struct record_opts *opts)
}
if (callchain_param.enabled && !evsel->no_aux_samples)
- perf_evsel__config_callgraph(evsel);
+ perf_evsel__config_callgraph(evsel, opts);
if (target__has_cpu(&opts->target))
perf_evsel__set_sample_bit(evsel, CPU);
--
1.8.3.2
From: Kan Liang <[email protected]>
LBR call stack only has user callchain. It is output as
PERF_SAMPLE_BRANCH_STACK data format. For the kernel callchain, it's
still from PERF_SAMPLE_CALLCHAIN.
The perf tool has to handle both data sources to construct a
complete callstack.
For perf report -D option, both lbr and fp information will be
displayed.
A new call chain recording option "lbr" is introduced into perf tool for
LBR call stack. The user can use --call-graph lbr to get the call stack
information from hardware.
Here are some examples.
When profiling bc(1) on Fedora 19:
echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l <
cmd
If enabling LBR, perf report output looks like:
50.36% bc bc [.] bc_divide
|
--- bc_divide
execute
run_code
yyparse
main
__libc_start_main
_start
33.66% bc bc [.] _one_mult
|
--- _one_mult
bc_divide
execute
run_code
yyparse
main
__libc_start_main
_start
7.62% bc bc [.] _bc_do_add
|
--- _bc_do_add
|
|--99.89%-- 0x2000186a8
--0.11%-- [...]
6.83% bc bc [.] _bc_do_sub
|
--- _bc_do_sub
|
|--99.94%-- bc_add
| execute
| run_code
| yyparse
| main
| __libc_start_main
| _start
--0.06%-- [...]
0.46% bc libc-2.17.so [.] __memset_sse2
|
--- __memset_sse2
|
|--54.13%-- bc_new_num
| |
| |--51.00%-- bc_divide
| | execute
| | run_code
| | yyparse
| | main
| | __libc_start_main
| | _start
| |
| |--30.46%-- _bc_do_sub
| | bc_add
| | execute
| | run_code
| | yyparse
| | main
| | __libc_start_main
| | _start
| |
| --18.55%-- _bc_do_add
| bc_add
| execute
| run_code
| yyparse
| main
| __libc_start_main
| _start
|
--45.87%-- bc_divide
execute
run_code
yyparse
main
__libc_start_main
_start
If using FP, perf report output looks like:
echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd
50.49% bc bc [.] bc_divide
|
--- bc_divide
33.57% bc bc [.] _one_mult
|
--- _one_mult
7.61% bc bc [.] _bc_do_add
|
--- _bc_do_add
0x2000186a8
6.88% bc bc [.] _bc_do_sub
|
--- _bc_do_sub
0.42% bc libc-2.17.so [.] __memcpy_ssse3_back
|
--- __memcpy_ssse3_back
If using LBR, perf report -D output looks like:
3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748:
0x408ea8 period: 609644 addr: 0
... LBR call chain: nr:8
..... 0: fffffffffffffe00
..... 1: 0000000000408e50
..... 2: 000000000040a458
..... 3: 000000000040562e
..... 4: 0000000000408590
..... 5: 00000000004022c0
..... 6: 00000000004015dd
..... 7: 0000003d1cc21b43
... FP chain: nr:2
..... 0: fffffffffffffe00
..... 1: 0000000000408ea8
... thread: bc:9748
...... dso: /usr/bin/bc
The LBR call stack has following known limitations
- Zero length calls are not filtered out by hardware
- Exception handing such as setjmp/longjmp will have calls/returns not
match
- Pushing different return address onto the stack will have
calls/returns
not match
- If callstack is deeper than the LBR, only the last entries are
captured
Signed-off-by: Kan Liang <[email protected]>
---
tools/perf/util/evsel.h | 4 ++
tools/perf/util/machine.c | 102 +++++++++++++++++++++++++++++++++++++++++-----
tools/perf/util/session.c | 64 ++++++++++++++++++++++++++---
3 files changed, 153 insertions(+), 17 deletions(-)
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index 9797909..1bbaa74 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -368,4 +368,8 @@ for ((_evsel) = list_entry((_leader)->node.next, struct perf_evsel, node); \
(_evsel) && (_evsel)->leader == (_leader); \
(_evsel) = list_entry((_evsel)->node.next, struct perf_evsel, node))
+static inline bool has_branch_callstack(struct perf_evsel *evsel)
+{
+ return evsel->attr.branch_sample_type & PERF_SAMPLE_BRANCH_CALL_STACK;
+}
#endif /* __PERF_EVSEL_H */
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index 7fd3cf2..41b7d09 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -1500,18 +1500,100 @@ static int remove_loops(struct branch_entry *l, int nr)
return nr;
}
-static int thread__resolve_callchain_sample(struct thread *thread,
- struct ip_callchain *chain,
- struct branch_stack *branch,
- struct symbol **parent,
- struct addr_location *root_al,
- int max_stack)
+/*
+ * Recolve LBR callstack chain sample
+ * Return:
+ * 1 on success get LBR callchain information
+ * 0 no available LBR callchain information, should try fp
+ * negative error code on other errors.
+ */
+static int resolve_lbr_callchain_sample(struct thread *thread,
+ struct perf_sample *sample,
+ struct symbol **parent,
+ struct addr_location *root_al,
+ int max_stack)
{
+ struct ip_callchain *chain = sample->callchain;
+ int chain_nr = min(max_stack, (int)chain->nr);
+ int i, j, err;
+ u64 ip;
+
+ for (i = 0; i < chain_nr; i++) {
+ if (chain->ips[i] == PERF_CONTEXT_USER)
+ break;
+ }
+
+ /* LBR only affects the user callchain */
+ if (i != chain_nr) {
+ struct branch_stack *lbr_stack = sample->branch_stack;
+ int lbr_nr = lbr_stack->nr;
+ /*
+ * LBR callstack can only get user call chain.
+ * The mix_chain_nr is kernel call chain
+ * number plus LBR user call chain number.
+ * i is kernel call chain number,
+ * 1 is PERF_CONTEXT_USER,
+ * lbr_nr + 1 is the user call chain number.
+ * For details, please refer to the comments
+ * in callchain__printf
+ */
+ int mix_chain_nr = i + 1 + lbr_nr + 1;
+
+ if (mix_chain_nr > PERF_MAX_STACK_DEPTH + PERF_MAX_BRANCH_DEPTH) {
+ pr_warning("corrupted callchain. skipping...\n");
+ return 0;
+ }
+
+ for (j = 0; j < mix_chain_nr; j++) {
+ if (callchain_param.order == ORDER_CALLEE) {
+ if (j < i + 1)
+ ip = chain->ips[j];
+ else if (j > i + 1)
+ ip = lbr_stack->entries[j - i - 2].from;
+ else
+ ip = lbr_stack->entries[0].to;
+ } else {
+ if (j < lbr_nr)
+ ip = lbr_stack->entries[lbr_nr - j - 1].from;
+ else if (j > lbr_nr)
+ ip = chain->ips[i + 1 - (j - lbr_nr)];
+ else
+ ip = lbr_stack->entries[0].to;
+ }
+
+ err = add_callchain_ip(thread, parent, root_al, false, ip);
+ if (err)
+ return (err < 0) ? err : 0;
+ }
+ return 1;
+ }
+
+ return 0;
+}
+
+static int thread__resolve_callchain_sample(struct thread *thread,
+ struct perf_evsel *evsel,
+ struct perf_sample *sample,
+ struct symbol **parent,
+ struct addr_location *root_al,
+ int max_stack)
+{
+ struct branch_stack *branch = sample->branch_stack;
+ struct ip_callchain *chain = sample->callchain;
int chain_nr = min(max_stack, (int)chain->nr);
int i, j, err;
int skip_idx = -1;
int first_call = 0;
+ callchain_cursor_reset(&callchain_cursor);
+
+ if (has_branch_callstack(evsel)) {
+ err = resolve_lbr_callchain_sample(thread, sample, parent,
+ root_al, max_stack);
+ if (err)
+ return (err < 0) ? err : 0;
+ }
+
/*
* Based on DWARF debug information, some architectures skip
* a callchain entry saved by the kernel.
@@ -1519,8 +1601,6 @@ static int thread__resolve_callchain_sample(struct thread *thread,
if (chain->nr < PERF_MAX_STACK_DEPTH)
skip_idx = arch_skip_callchain_idx(thread, chain);
- callchain_cursor_reset(&callchain_cursor);
-
/*
* Add branches to call stack for easier browsing. This gives
* more context for a sample than just the callers.
@@ -1621,9 +1701,9 @@ int thread__resolve_callchain(struct thread *thread,
struct addr_location *root_al,
int max_stack)
{
- int ret = thread__resolve_callchain_sample(thread, sample->callchain,
- sample->branch_stack,
- parent, root_al, max_stack);
+ int ret = thread__resolve_callchain_sample(thread, evsel,
+ sample, parent,
+ root_al, max_stack);
if (ret)
return ret;
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index f4478ce..ee18c0d 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -557,15 +557,67 @@ int perf_session_queue_event(struct perf_session *s, union perf_event *event,
return 0;
}
-static void callchain__printf(struct perf_sample *sample)
+static void callchain__lbr_callstack_printf(struct perf_sample *sample)
{
+ struct ip_callchain *callchain = sample->callchain;
+ struct branch_stack *lbr_stack = sample->branch_stack;
+ u64 kernel_callchain_nr = callchain->nr;
unsigned int i;
- printf("... chain: nr:%" PRIu64 "\n", sample->callchain->nr);
+ for (i = 0; i < kernel_callchain_nr; i++) {
+ if (callchain->ips[i] == PERF_CONTEXT_USER)
+ break;
+ }
+
+ if ((i != kernel_callchain_nr) && lbr_stack->nr) {
+ u64 total_nr;
+ /*
+ * LBR callstack can only get user call chain,
+ * i is kernel call chain number,
+ * 1 is PERF_CONTEXT_USER.
+ *
+ * The user call chain is stored in LBR registers.
+ * LBR are pair registers. The caller is stored
+ * in "from" register, while the callee is stored
+ * in "to" register.
+ * For example, there is a call stack
+ * "A"->"B"->"C"->"D".
+ * The LBR registers will recorde like
+ * "C"->"D", "B"->"C", "A"->"B".
+ * So only the first "to" register and all "from"
+ * registers are needed to construct the whole stack.
+ */
+ total_nr = i + 1 + lbr_stack->nr + 1;
+ kernel_callchain_nr = i + 1;
+
+ printf("... LBR call chain: nr:%" PRIu64 "\n", total_nr);
+
+ for (i = 0; i < kernel_callchain_nr; i++)
+ printf("..... %2d: %016" PRIx64 "\n",
+ i, callchain->ips[i]);
+
+ printf("..... %2d: %016" PRIx64 "\n",
+ (int)(kernel_callchain_nr), lbr_stack->entries[0].to);
+ for (i = 0; i < lbr_stack->nr; i++)
+ printf("..... %2d: %016" PRIx64 "\n",
+ (int)(i + kernel_callchain_nr + 1), lbr_stack->entries[i].from);
+ }
+}
+
+static void callchain__printf(struct perf_evsel *evsel,
+ struct perf_sample *sample)
+{
+ unsigned int i;
+ struct ip_callchain *callchain = sample->callchain;
+
+ if (has_branch_callstack(evsel))
+ callchain__lbr_callstack_printf(sample);
+
+ printf("... FP chain: nr:%" PRIu64 "\n", callchain->nr);
- for (i = 0; i < sample->callchain->nr; i++)
+ for (i = 0; i < callchain->nr; i++)
printf("..... %2d: %016" PRIx64 "\n",
- i, sample->callchain->ips[i]);
+ i, callchain->ips[i]);
}
static void branch_stack__printf(struct perf_sample *sample)
@@ -691,9 +743,9 @@ static void dump_sample(struct perf_evsel *evsel, union perf_event *event,
sample_type = evsel->attr.sample_type;
if (sample_type & PERF_SAMPLE_CALLCHAIN)
- callchain__printf(sample);
+ callchain__printf(evsel, sample);
- if (sample_type & PERF_SAMPLE_BRANCH_STACK)
+ if ((sample_type & PERF_SAMPLE_BRANCH_STACK) && !has_branch_callstack(evsel))
branch_stack__printf(sample);
if (sample_type & PERF_SAMPLE_REGS_USER)
--
1.8.3.2
On Tue, 18 Nov 2014 16:36:55 -0500, kan liang wrote:
> From: Kan Liang <[email protected]>
>
> Currently, there are two call chain recording options, fp and dwarf.
> Haswell has a new feature that utilizes the existing LBR facility to
> record call chains. So it provides the third options to record call
> chain. This patch enables the lbr call stack support.
>
> LBR call stack has some limitations. It reuses current LBR facility, so
> LBR call stack and branch record can not be enabled at the same time. It
> is only available for user callchain.
> However, LBR call stack can work on the user app which doesn't have
> frame-pointer or dwarf debug info compiled. It is a good alternative
> when nothing else works.
[SNIP]
> static void
> -perf_evsel__config_callgraph(struct perf_evsel *evsel)
> +perf_evsel__config_callgraph(struct perf_evsel *evsel,
> + struct record_opts *opts)
> {
> bool function = perf_evsel__is_function_event(evsel);
> struct perf_event_attr *attr = &evsel->attr;
>
> perf_evsel__set_sample_bit(evsel, CALLCHAIN);
>
> + if (callchain_param.record_mode == CALLCHAIN_LBR) {
> + if (!opts->branch_stack) {
> + perf_evsel__set_sample_bit(evsel, BRANCH_STACK);
> + attr->branch_sample_type = PERF_SAMPLE_BRANCH_USER |
> + PERF_SAMPLE_BRANCH_CALL_STACK;
> + if (attr->exclude_user) {
> + attr->exclude_user = 0;
> +
> + pr_warning("LBR callstack option is only available"
> + " to get user callchain information."
> + " Force exclude_user to 0.\n");
> + }
I'm not sure what's in a higher priority - maybe I missed earlier
discussion. IOW what about this?
if (attr->exclude_user) {
pr_warning("LBR callstack option is only available"
" to get user callchain information.\n");
} else {
perf_evsel__set_sample_bit(evsel, BRANCH_STACK);
attr->branch_sample_type = PERF_SAMPLE_BRANCH_USER |
PERF_SAMPLE_BRANCH_CALL_STACK;
}
> + } else
> + pr_info("Cannot use LBR callstack with branch stack\n");
It seems pr_warning is more appropriate here.
Thanks,
Namhyung
> + }
> +
> if (callchain_param.record_mode == CALLCHAIN_DWARF) {
> if (!function) {
> perf_evsel__set_sample_bit(evsel, REGS_USER);
> @@ -659,7 +676,7 @@ void perf_evsel__config(struct perf_evsel *evsel, struct record_opts *opts)
> }
>
> if (callchain_param.enabled && !evsel->no_aux_samples)
> - perf_evsel__config_callgraph(evsel);
> + perf_evsel__config_callgraph(evsel, opts);
>
> if (target__has_cpu(&opts->target))
> perf_evsel__set_sample_bit(evsel, CPU);
> On Tue, 18 Nov 2014 16:36:55 -0500, kan liang wrote:
> > From: Kan Liang <[email protected]>
> >
> > Currently, there are two call chain recording options, fp and dwarf.
> > Haswell has a new feature that utilizes the existing LBR facility to
> > record call chains. So it provides the third options to record call
> > chain. This patch enables the lbr call stack support.
> >
> > LBR call stack has some limitations. It reuses current LBR facility,
> > so LBR call stack and branch record can not be enabled at the same
> > time. It is only available for user callchain.
> > However, LBR call stack can work on the user app which doesn't have
> > frame-pointer or dwarf debug info compiled. It is a good alternative
> > when nothing else works.
>
>
> [SNIP]
> > static void
> > -perf_evsel__config_callgraph(struct perf_evsel *evsel)
> > +perf_evsel__config_callgraph(struct perf_evsel *evsel,
> > + struct record_opts *opts)
> > {
> > bool function = perf_evsel__is_function_event(evsel);
> > struct perf_event_attr *attr = &evsel->attr;
> >
> > perf_evsel__set_sample_bit(evsel, CALLCHAIN);
> >
> > + if (callchain_param.record_mode == CALLCHAIN_LBR) {
> > + if (!opts->branch_stack) {
> > + perf_evsel__set_sample_bit(evsel,
> BRANCH_STACK);
> > + attr->branch_sample_type =
> PERF_SAMPLE_BRANCH_USER |
> > +
> PERF_SAMPLE_BRANCH_CALL_STACK;
> > + if (attr->exclude_user) {
> > + attr->exclude_user = 0;
> > +
> > + pr_warning("LBR callstack option is only
> available"
> > + " to get user callchain
> information."
> > + " Force exclude_user to 0.\n");
> > + }
>
> I'm not sure what's in a higher priority - maybe I missed earlier discussion.
> IOW what about this?
>
> if (attr->exclude_user) {
> pr_warning("LBR callstack option is only
> available"
> " to get user callchain
> information.\n");
I think either is fine. I'd like to add more info "Falling back to framepointers."
based on your changes.
So the user know what they will get then.
What do you think?
pr_warning("LBR callstack option is only available"
" to get user callchain information."
" Falling back to framepointers.\n");
pr_ warning ("Cannot use LBR callstack with branch stack"
" Falling back to framepointers.\n");
Thanks,
Kan
> } else {
> perf_evsel__set_sample_bit(evsel,
> BRANCH_STACK);
> attr->branch_sample_type =
> PERF_SAMPLE_BRANCH_USER |
>
> PERF_SAMPLE_BRANCH_CALL_STACK;
> }
>
> > + } else
> > + pr_info("Cannot use LBR callstack with branch
> stack\n");
>
> It seems pr_warning is more appropriate here.
>
> Thanks,
> Namhyung
>
>
> > + }
> > +
> > if (callchain_param.record_mode == CALLCHAIN_DWARF) {
> > if (!function) {
> > perf_evsel__set_sample_bit(evsel, REGS_USER);
> @@ -659,7 +676,7 @@
> > void perf_evsel__config(struct perf_evsel *evsel, struct record_opts
> *opts)
> > }
> >
> > if (callchain_param.enabled && !evsel->no_aux_samples)
> > - perf_evsel__config_callgraph(evsel);
> > + perf_evsel__config_callgraph(evsel, opts);
> >
> > if (target__has_cpu(&opts->target))
> > perf_evsel__set_sample_bit(evsel, CPU);
On Wed, 19 Nov 2014 14:32:08 +0000, Kan Liang wrote:
>> On Tue, 18 Nov 2014 16:36:55 -0500, kan liang wrote:
>> > + if (attr->exclude_user) {
>> > + attr->exclude_user = 0;
>> > +
>> > + pr_warning("LBR callstack option is only available"
>> > + " to get user callchain information."
>> > + " Force exclude_user to 0.\n");
>> > + }
>>
>> I'm not sure what's in a higher priority - maybe I missed earlier discussion.
>> IOW what about this?
>>
>> if (attr->exclude_user) {
>> pr_warning("LBR callstack option is only available"
>> " to get user callchain information.\n");
>
> I think either is fine. I'd like to add more info "Falling back to framepointers."
> based on your changes.
> So the user know what they will get then.
>
> What do you think?
Looks good to me. But I still slightly prefer not to override user
settings. But it's not a strong opinion though - I'd like to here from
others.
Thanks,
Namhyung
>
> pr_warning("LBR callstack option is only available"
> " to get user callchain information."
> " Falling back to framepointers.\n");
>
> pr_ warning ("Cannot use LBR callstack with branch stack"
> " Falling back to framepointers.\n");
On Thu, Nov 20, 2014 at 7:32 AM, Namhyung Kim <[email protected]> wrote:
>
> On Wed, 19 Nov 2014 14:32:08 +0000, Kan Liang wrote:
> >> On Tue, 18 Nov 2014 16:36:55 -0500, kan liang wrote:
> >> > + if (attr->exclude_user) {
> >> > + attr->exclude_user = 0;
> >> > +
> >> > + pr_warning("LBR callstack option is only available"
> >> > + " to get user callchain information."
> >> > + " Force exclude_user to 0.\n");
> >> > + }
> >>
> >> I'm not sure what's in a higher priority - maybe I missed earlier discussion.
> >> IOW what about this?
> >>
> >> if (attr->exclude_user) {
> >> pr_warning("LBR callstack option is only available"
> >> " to get user callchain information.\n");
> >
> > I think either is fine. I'd like to add more info "Falling back to framepointers."
> > based on your changes.
> > So the user know what they will get then.
> >
> > What do you think?
>
> Looks good to me. But I still slightly prefer not to override user
> settings. But it's not a strong opinion though - I'd like to here from
> others.
>
I don't like when the tool changes the use settings under the hood.
I think perf did that with cycles -> TASK_CLOCK if PMU was not
supported and that was very confusing to me especially with no
warning.
So if LBR Call stack mode is not avail, then inform the user with a warning
or error, don't swap silently.
>
> On Thu, Nov 20, 2014 at 7:32 AM, Namhyung Kim <[email protected]>
> wrote:
> >
> > On Wed, 19 Nov 2014 14:32:08 +0000, Kan Liang wrote:
> > >> On Tue, 18 Nov 2014 16:36:55 -0500, kan liang wrote:
> > >> > + if (attr->exclude_user) {
> > >> > + attr->exclude_user = 0;
> > >> > +
> > >> > + pr_warning("LBR callstack option is only available"
> > >> > + " to get user callchain information."
> > >> > + " Force exclude_user to 0.\n");
> > >> > + }
> > >>
> > >> I'm not sure what's in a higher priority - maybe I missed earlier
> discussion.
> > >> IOW what about this?
> > >>
> > >> if (attr->exclude_user) {
> > >> pr_warning("LBR callstack option is only available"
> > >> " to get user callchain
> > >> information.\n");
> > >
> > > I think either is fine. I'd like to add more info "Falling back to
> framepointers."
> > > based on your changes.
> > > So the user know what they will get then.
> > >
> > > What do you think?
> >
> > Looks good to me. But I still slightly prefer not to override user
> > settings. But it's not a strong opinion though - I'd like to here
> > from others.
> >
> I don't like when the tool changes the use settings under the hood.
> I think perf did that with cycles -> TASK_CLOCK if PMU was not supported
> and that was very confusing to me especially with no warning.
> So if LBR Call stack mode is not avail, then inform the user with a warning or
> error, don't swap silently.
OK. So the new patch will warn the user if LBR call stack is no available.
It will also tell the user that the FP mode will replace the LBR mode.
Thanks,
Kan
????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay? ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?