Signed-off-by: Preston Fick <[email protected]>
---
drivers/usb/serial/cp210x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 6c4eb3c..fb8d3fa 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -120,7 +120,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
- { USB_DEVICE(0x10C4, 0x8875) }, /* CEL MeshConnect USB Stick */
+ { USB_DEVICE(0x10C4, 0x8857) }, /* CEL MeshConnect USB Stick */
{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
--
1.9.1
On Sun, Dec 21, 2014 at 11:33:39PM -0600, Preston Fick wrote:
Please add a proper commit message here describing why this is needed.
Are there any devices with the original PID or was that just a typo?
> Signed-off-by: Preston Fick <[email protected]>
> ---
> drivers/usb/serial/cp210x.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
> index 6c4eb3c..fb8d3fa 100644
> --- a/drivers/usb/serial/cp210x.c
> +++ b/drivers/usb/serial/cp210x.c
> @@ -120,7 +120,7 @@ static const struct usb_device_id id_table[] = {
> { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
> { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
> { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
> - { USB_DEVICE(0x10C4, 0x8875) }, /* CEL MeshConnect USB Stick */
> + { USB_DEVICE(0x10C4, 0x8857) }, /* CEL MeshConnect USB Stick */
> { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
> { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
> { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
Thanks,
Johan