2015-02-04 02:08:45

by Ray Jui

[permalink] [raw]
Subject: [PATCH v4 0/4] Add pinctrl support to Broadcom Cygnus SoC

This patchset contains the initial pinctrl (IOMUX) support for the Broadcom
Cygnus SoC. The Cygnus IOMUX controller supports group based mux configuration
and allows certain pins to be muxed to GPIO function individually

Changes from v3:
- Fix the driver to have more proper use of "const" in various places
- Other minor improvements

Changes from v2:
- Consolidate all Broadcom pinctrl drivers into drivers/pinctrl/bcm/*
- Change the Cygnus IOMUX driver to use standard Linux pinctrl subnode
properties such as "function" and "groups" for pinmux configuration, instead
of non-standard properties such as "brcm,function" and "brcm,group"
- Use real function names like "spi0", "lcd", "key", and etc. instead of HW
specific mux names like "alt1", "alt2", "alt3", and etc.
- Add suffix "grp" to all group names
- Add support to allow individual pins to be muxed to GPIO function through
subsystem callbacks "gpio_request_enable" and "gpio_disable_free", and get rid
of all GPIO groups
- Other minor improvements in the driver

Changes from v1:
- Fix a typo in device tree binding document

Ray Jui (4):
pinctrl: bcm: consolidate Broadcom pinctrl drivers
pinctrl: Broadcom Cygnus pinctrl device tree binding
pinctrl: cygnus: add initial IOMUX driver support
ARM: dts: enable IOMUX for Broadcom Cygnus

.../bindings/pinctrl/brcm,cygnus-pinmux.txt | 157 +++
arch/arm/boot/dts/bcm-cygnus.dtsi | 6 +
drivers/pinctrl/Kconfig | 19 +-
drivers/pinctrl/Makefile | 4 +-
drivers/pinctrl/bcm/Kconfig | 34 +
drivers/pinctrl/bcm/Makefile | 5 +
drivers/pinctrl/bcm/pinctrl-bcm281xx.c | 1455 ++++++++++++++++++++
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 1072 ++++++++++++++
drivers/pinctrl/bcm/pinctrl-cygnus-mux.c | 1088 +++++++++++++++
drivers/pinctrl/pinctrl-bcm281xx.c | 1455 --------------------
drivers/pinctrl/pinctrl-bcm2835.c | 1072 --------------
11 files changed, 3820 insertions(+), 2547 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt
create mode 100644 drivers/pinctrl/bcm/Kconfig
create mode 100644 drivers/pinctrl/bcm/Makefile
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm281xx.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm2835.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
delete mode 100644 drivers/pinctrl/pinctrl-bcm281xx.c
delete mode 100644 drivers/pinctrl/pinctrl-bcm2835.c

--
1.7.9.5


2015-02-04 02:08:55

by Ray Jui

[permalink] [raw]
Subject: [PATCH v4 1/4] pinctrl: bcm: consolidate Broadcom pinctrl drivers

Consolidate Broadcom pinctrl drivers into drivers/pinctrl/bcm/*

Signed-off-by: Ray Jui <[email protected]>
---
drivers/pinctrl/Kconfig | 19 +-
drivers/pinctrl/Makefile | 4 +-
drivers/pinctrl/bcm/Kconfig | 21 +
drivers/pinctrl/bcm/Makefile | 4 +
drivers/pinctrl/bcm/pinctrl-bcm281xx.c | 1455 ++++++++++++++++++++++++++++++++
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 1072 +++++++++++++++++++++++
drivers/pinctrl/pinctrl-bcm281xx.c | 1455 --------------------------------
drivers/pinctrl/pinctrl-bcm2835.c | 1072 -----------------------
8 files changed, 2555 insertions(+), 2547 deletions(-)
create mode 100644 drivers/pinctrl/bcm/Kconfig
create mode 100644 drivers/pinctrl/bcm/Makefile
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm281xx.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm2835.c
delete mode 100644 drivers/pinctrl/pinctrl-bcm281xx.c
delete mode 100644 drivers/pinctrl/pinctrl-bcm2835.c

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index d014f22..6cfdad7 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -67,24 +67,6 @@ config PINCTRL_AT91
help
Say Y here to enable the at91 pinctrl driver

-config PINCTRL_BCM2835
- bool
- select PINMUX
- select PINCONF
-
-config PINCTRL_BCM281XX
- bool "Broadcom BCM281xx pinctrl driver"
- depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST)
- select PINMUX
- select PINCONF
- select GENERIC_PINCONF
- select REGMAP_MMIO
- help
- Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
- for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
- BCM28145, and BCM28155 SoCs. This driver requires the pinctrl
- framework. GPIO is provided by a separate GPIO driver.
-
config PINCTRL_LANTIQ
bool
depends on LANTIQ
@@ -191,6 +173,7 @@ config PINCTRL_PALMAS
open drain configuration for the Palmas series devices like
TPS65913, TPS80036 etc.

+source "drivers/pinctrl/bcm/Kconfig"
source "drivers/pinctrl/berlin/Kconfig"
source "drivers/pinctrl/freescale/Kconfig"
source "drivers/pinctrl/intel/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index c030b3d..c018bbf 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -14,8 +14,6 @@ obj-$(CONFIG_PINCTRL_AS3722) += pinctrl-as3722.o
obj-$(CONFIG_PINCTRL_BF54x) += pinctrl-adi2-bf54x.o
obj-$(CONFIG_PINCTRL_BF60x) += pinctrl-adi2-bf60x.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
-obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
-obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
@@ -36,6 +34,8 @@ obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o
obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o
obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o

+obj-$(CONFIG_ARCH_BCM) += bcm/
+obj-$(CONFIG_ARCH_BCM2835) += bcm/
obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-y += freescale/
obj-$(CONFIG_X86) += intel/
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
new file mode 100644
index 0000000..bc6d048
--- /dev/null
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -0,0 +1,21 @@
+#
+# Broadcom pinctrl drivers
+#
+
+config PINCTRL_BCM281XX
+ bool "Broadcom BCM281xx pinctrl driver"
+ depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST)
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ select REGMAP_MMIO
+ help
+ Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
+ for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
+ BCM28145, and BCM28155 SoCs. This driver requires the pinctrl
+ framework. GPIO is provided by a separate GPIO driver.
+
+config PINCTRL_BCM2835
+ bool
+ select PINMUX
+ select PINCONF
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
new file mode 100644
index 0000000..7ba80a3
--- /dev/null
+++ b/drivers/pinctrl/bcm/Makefile
@@ -0,0 +1,4 @@
+# Broadcom pinctrl support
+
+obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
+obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
new file mode 100644
index 0000000..73d99076
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
@@ -0,0 +1,1455 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include "../core.h"
+#include "../pinctrl-utils.h"
+
+/* BCM281XX Pin Control Registers Definitions */
+
+/* Function Select bits are the same for all pin control registers */
+#define BCM281XX_PIN_REG_F_SEL_MASK 0x0700
+#define BCM281XX_PIN_REG_F_SEL_SHIFT 8
+
+/* Standard pin register */
+#define BCM281XX_STD_PIN_REG_DRV_STR_MASK 0x0007
+#define BCM281XX_STD_PIN_REG_DRV_STR_SHIFT 0
+#define BCM281XX_STD_PIN_REG_INPUT_DIS_MASK 0x0008
+#define BCM281XX_STD_PIN_REG_INPUT_DIS_SHIFT 3
+#define BCM281XX_STD_PIN_REG_SLEW_MASK 0x0010
+#define BCM281XX_STD_PIN_REG_SLEW_SHIFT 4
+#define BCM281XX_STD_PIN_REG_PULL_UP_MASK 0x0020
+#define BCM281XX_STD_PIN_REG_PULL_UP_SHIFT 5
+#define BCM281XX_STD_PIN_REG_PULL_DN_MASK 0x0040
+#define BCM281XX_STD_PIN_REG_PULL_DN_SHIFT 6
+#define BCM281XX_STD_PIN_REG_HYST_MASK 0x0080
+#define BCM281XX_STD_PIN_REG_HYST_SHIFT 7
+
+/* I2C pin register */
+#define BCM281XX_I2C_PIN_REG_INPUT_DIS_MASK 0x0004
+#define BCM281XX_I2C_PIN_REG_INPUT_DIS_SHIFT 2
+#define BCM281XX_I2C_PIN_REG_SLEW_MASK 0x0008
+#define BCM281XX_I2C_PIN_REG_SLEW_SHIFT 3
+#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_MASK 0x0070
+#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_SHIFT 4
+
+/* HDMI pin register */
+#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_MASK 0x0008
+#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_SHIFT 3
+#define BCM281XX_HDMI_PIN_REG_MODE_MASK 0x0010
+#define BCM281XX_HDMI_PIN_REG_MODE_SHIFT 4
+
+/**
+ * bcm281xx_pin_type - types of pin register
+ */
+enum bcm281xx_pin_type {
+ BCM281XX_PIN_TYPE_UNKNOWN = 0,
+ BCM281XX_PIN_TYPE_STD,
+ BCM281XX_PIN_TYPE_I2C,
+ BCM281XX_PIN_TYPE_HDMI,
+};
+
+static enum bcm281xx_pin_type std_pin = BCM281XX_PIN_TYPE_STD;
+static enum bcm281xx_pin_type i2c_pin = BCM281XX_PIN_TYPE_I2C;
+static enum bcm281xx_pin_type hdmi_pin = BCM281XX_PIN_TYPE_HDMI;
+
+/**
+ * bcm281xx_pin_function- define pin function
+ */
+struct bcm281xx_pin_function {
+ const char *name;
+ const char * const *groups;
+ const unsigned ngroups;
+};
+
+/**
+ * bcm281xx_pinctrl_data - Broadcom-specific pinctrl data
+ * @reg_base - base of pinctrl registers
+ */
+struct bcm281xx_pinctrl_data {
+ void __iomem *reg_base;
+
+ /* List of all pins */
+ const struct pinctrl_pin_desc *pins;
+ const unsigned npins;
+
+ const struct bcm281xx_pin_function *functions;
+ const unsigned nfunctions;
+
+ struct regmap *regmap;
+};
+
+/*
+ * Pin number definition. The order here must be the same as defined in the
+ * PADCTRLREG block in the RDB.
+ */
+#define BCM281XX_PIN_ADCSYNC 0
+#define BCM281XX_PIN_BAT_RM 1
+#define BCM281XX_PIN_BSC1_SCL 2
+#define BCM281XX_PIN_BSC1_SDA 3
+#define BCM281XX_PIN_BSC2_SCL 4
+#define BCM281XX_PIN_BSC2_SDA 5
+#define BCM281XX_PIN_CLASSGPWR 6
+#define BCM281XX_PIN_CLK_CX8 7
+#define BCM281XX_PIN_CLKOUT_0 8
+#define BCM281XX_PIN_CLKOUT_1 9
+#define BCM281XX_PIN_CLKOUT_2 10
+#define BCM281XX_PIN_CLKOUT_3 11
+#define BCM281XX_PIN_CLKREQ_IN_0 12
+#define BCM281XX_PIN_CLKREQ_IN_1 13
+#define BCM281XX_PIN_CWS_SYS_REQ1 14
+#define BCM281XX_PIN_CWS_SYS_REQ2 15
+#define BCM281XX_PIN_CWS_SYS_REQ3 16
+#define BCM281XX_PIN_DIGMIC1_CLK 17
+#define BCM281XX_PIN_DIGMIC1_DQ 18
+#define BCM281XX_PIN_DIGMIC2_CLK 19
+#define BCM281XX_PIN_DIGMIC2_DQ 20
+#define BCM281XX_PIN_GPEN13 21
+#define BCM281XX_PIN_GPEN14 22
+#define BCM281XX_PIN_GPEN15 23
+#define BCM281XX_PIN_GPIO00 24
+#define BCM281XX_PIN_GPIO01 25
+#define BCM281XX_PIN_GPIO02 26
+#define BCM281XX_PIN_GPIO03 27
+#define BCM281XX_PIN_GPIO04 28
+#define BCM281XX_PIN_GPIO05 29
+#define BCM281XX_PIN_GPIO06 30
+#define BCM281XX_PIN_GPIO07 31
+#define BCM281XX_PIN_GPIO08 32
+#define BCM281XX_PIN_GPIO09 33
+#define BCM281XX_PIN_GPIO10 34
+#define BCM281XX_PIN_GPIO11 35
+#define BCM281XX_PIN_GPIO12 36
+#define BCM281XX_PIN_GPIO13 37
+#define BCM281XX_PIN_GPIO14 38
+#define BCM281XX_PIN_GPS_PABLANK 39
+#define BCM281XX_PIN_GPS_TMARK 40
+#define BCM281XX_PIN_HDMI_SCL 41
+#define BCM281XX_PIN_HDMI_SDA 42
+#define BCM281XX_PIN_IC_DM 43
+#define BCM281XX_PIN_IC_DP 44
+#define BCM281XX_PIN_KP_COL_IP_0 45
+#define BCM281XX_PIN_KP_COL_IP_1 46
+#define BCM281XX_PIN_KP_COL_IP_2 47
+#define BCM281XX_PIN_KP_COL_IP_3 48
+#define BCM281XX_PIN_KP_ROW_OP_0 49
+#define BCM281XX_PIN_KP_ROW_OP_1 50
+#define BCM281XX_PIN_KP_ROW_OP_2 51
+#define BCM281XX_PIN_KP_ROW_OP_3 52
+#define BCM281XX_PIN_LCD_B_0 53
+#define BCM281XX_PIN_LCD_B_1 54
+#define BCM281XX_PIN_LCD_B_2 55
+#define BCM281XX_PIN_LCD_B_3 56
+#define BCM281XX_PIN_LCD_B_4 57
+#define BCM281XX_PIN_LCD_B_5 58
+#define BCM281XX_PIN_LCD_B_6 59
+#define BCM281XX_PIN_LCD_B_7 60
+#define BCM281XX_PIN_LCD_G_0 61
+#define BCM281XX_PIN_LCD_G_1 62
+#define BCM281XX_PIN_LCD_G_2 63
+#define BCM281XX_PIN_LCD_G_3 64
+#define BCM281XX_PIN_LCD_G_4 65
+#define BCM281XX_PIN_LCD_G_5 66
+#define BCM281XX_PIN_LCD_G_6 67
+#define BCM281XX_PIN_LCD_G_7 68
+#define BCM281XX_PIN_LCD_HSYNC 69
+#define BCM281XX_PIN_LCD_OE 70
+#define BCM281XX_PIN_LCD_PCLK 71
+#define BCM281XX_PIN_LCD_R_0 72
+#define BCM281XX_PIN_LCD_R_1 73
+#define BCM281XX_PIN_LCD_R_2 74
+#define BCM281XX_PIN_LCD_R_3 75
+#define BCM281XX_PIN_LCD_R_4 76
+#define BCM281XX_PIN_LCD_R_5 77
+#define BCM281XX_PIN_LCD_R_6 78
+#define BCM281XX_PIN_LCD_R_7 79
+#define BCM281XX_PIN_LCD_VSYNC 80
+#define BCM281XX_PIN_MDMGPIO0 81
+#define BCM281XX_PIN_MDMGPIO1 82
+#define BCM281XX_PIN_MDMGPIO2 83
+#define BCM281XX_PIN_MDMGPIO3 84
+#define BCM281XX_PIN_MDMGPIO4 85
+#define BCM281XX_PIN_MDMGPIO5 86
+#define BCM281XX_PIN_MDMGPIO6 87
+#define BCM281XX_PIN_MDMGPIO7 88
+#define BCM281XX_PIN_MDMGPIO8 89
+#define BCM281XX_PIN_MPHI_DATA_0 90
+#define BCM281XX_PIN_MPHI_DATA_1 91
+#define BCM281XX_PIN_MPHI_DATA_2 92
+#define BCM281XX_PIN_MPHI_DATA_3 93
+#define BCM281XX_PIN_MPHI_DATA_4 94
+#define BCM281XX_PIN_MPHI_DATA_5 95
+#define BCM281XX_PIN_MPHI_DATA_6 96
+#define BCM281XX_PIN_MPHI_DATA_7 97
+#define BCM281XX_PIN_MPHI_DATA_8 98
+#define BCM281XX_PIN_MPHI_DATA_9 99
+#define BCM281XX_PIN_MPHI_DATA_10 100
+#define BCM281XX_PIN_MPHI_DATA_11 101
+#define BCM281XX_PIN_MPHI_DATA_12 102
+#define BCM281XX_PIN_MPHI_DATA_13 103
+#define BCM281XX_PIN_MPHI_DATA_14 104
+#define BCM281XX_PIN_MPHI_DATA_15 105
+#define BCM281XX_PIN_MPHI_HA0 106
+#define BCM281XX_PIN_MPHI_HAT0 107
+#define BCM281XX_PIN_MPHI_HAT1 108
+#define BCM281XX_PIN_MPHI_HCE0_N 109
+#define BCM281XX_PIN_MPHI_HCE1_N 110
+#define BCM281XX_PIN_MPHI_HRD_N 111
+#define BCM281XX_PIN_MPHI_HWR_N 112
+#define BCM281XX_PIN_MPHI_RUN0 113
+#define BCM281XX_PIN_MPHI_RUN1 114
+#define BCM281XX_PIN_MTX_SCAN_CLK 115
+#define BCM281XX_PIN_MTX_SCAN_DATA 116
+#define BCM281XX_PIN_NAND_AD_0 117
+#define BCM281XX_PIN_NAND_AD_1 118
+#define BCM281XX_PIN_NAND_AD_2 119
+#define BCM281XX_PIN_NAND_AD_3 120
+#define BCM281XX_PIN_NAND_AD_4 121
+#define BCM281XX_PIN_NAND_AD_5 122
+#define BCM281XX_PIN_NAND_AD_6 123
+#define BCM281XX_PIN_NAND_AD_7 124
+#define BCM281XX_PIN_NAND_ALE 125
+#define BCM281XX_PIN_NAND_CEN_0 126
+#define BCM281XX_PIN_NAND_CEN_1 127
+#define BCM281XX_PIN_NAND_CLE 128
+#define BCM281XX_PIN_NAND_OEN 129
+#define BCM281XX_PIN_NAND_RDY_0 130
+#define BCM281XX_PIN_NAND_RDY_1 131
+#define BCM281XX_PIN_NAND_WEN 132
+#define BCM281XX_PIN_NAND_WP 133
+#define BCM281XX_PIN_PC1 134
+#define BCM281XX_PIN_PC2 135
+#define BCM281XX_PIN_PMU_INT 136
+#define BCM281XX_PIN_PMU_SCL 137
+#define BCM281XX_PIN_PMU_SDA 138
+#define BCM281XX_PIN_RFST2G_MTSLOTEN3G 139
+#define BCM281XX_PIN_RGMII_0_RX_CTL 140
+#define BCM281XX_PIN_RGMII_0_RXC 141
+#define BCM281XX_PIN_RGMII_0_RXD_0 142
+#define BCM281XX_PIN_RGMII_0_RXD_1 143
+#define BCM281XX_PIN_RGMII_0_RXD_2 144
+#define BCM281XX_PIN_RGMII_0_RXD_3 145
+#define BCM281XX_PIN_RGMII_0_TX_CTL 146
+#define BCM281XX_PIN_RGMII_0_TXC 147
+#define BCM281XX_PIN_RGMII_0_TXD_0 148
+#define BCM281XX_PIN_RGMII_0_TXD_1 149
+#define BCM281XX_PIN_RGMII_0_TXD_2 150
+#define BCM281XX_PIN_RGMII_0_TXD_3 151
+#define BCM281XX_PIN_RGMII_1_RX_CTL 152
+#define BCM281XX_PIN_RGMII_1_RXC 153
+#define BCM281XX_PIN_RGMII_1_RXD_0 154
+#define BCM281XX_PIN_RGMII_1_RXD_1 155
+#define BCM281XX_PIN_RGMII_1_RXD_2 156
+#define BCM281XX_PIN_RGMII_1_RXD_3 157
+#define BCM281XX_PIN_RGMII_1_TX_CTL 158
+#define BCM281XX_PIN_RGMII_1_TXC 159
+#define BCM281XX_PIN_RGMII_1_TXD_0 160
+#define BCM281XX_PIN_RGMII_1_TXD_1 161
+#define BCM281XX_PIN_RGMII_1_TXD_2 162
+#define BCM281XX_PIN_RGMII_1_TXD_3 163
+#define BCM281XX_PIN_RGMII_GPIO_0 164
+#define BCM281XX_PIN_RGMII_GPIO_1 165
+#define BCM281XX_PIN_RGMII_GPIO_2 166
+#define BCM281XX_PIN_RGMII_GPIO_3 167
+#define BCM281XX_PIN_RTXDATA2G_TXDATA3G1 168
+#define BCM281XX_PIN_RTXEN2G_TXDATA3G2 169
+#define BCM281XX_PIN_RXDATA3G0 170
+#define BCM281XX_PIN_RXDATA3G1 171
+#define BCM281XX_PIN_RXDATA3G2 172
+#define BCM281XX_PIN_SDIO1_CLK 173
+#define BCM281XX_PIN_SDIO1_CMD 174
+#define BCM281XX_PIN_SDIO1_DATA_0 175
+#define BCM281XX_PIN_SDIO1_DATA_1 176
+#define BCM281XX_PIN_SDIO1_DATA_2 177
+#define BCM281XX_PIN_SDIO1_DATA_3 178
+#define BCM281XX_PIN_SDIO4_CLK 179
+#define BCM281XX_PIN_SDIO4_CMD 180
+#define BCM281XX_PIN_SDIO4_DATA_0 181
+#define BCM281XX_PIN_SDIO4_DATA_1 182
+#define BCM281XX_PIN_SDIO4_DATA_2 183
+#define BCM281XX_PIN_SDIO4_DATA_3 184
+#define BCM281XX_PIN_SIM_CLK 185
+#define BCM281XX_PIN_SIM_DATA 186
+#define BCM281XX_PIN_SIM_DET 187
+#define BCM281XX_PIN_SIM_RESETN 188
+#define BCM281XX_PIN_SIM2_CLK 189
+#define BCM281XX_PIN_SIM2_DATA 190
+#define BCM281XX_PIN_SIM2_DET 191
+#define BCM281XX_PIN_SIM2_RESETN 192
+#define BCM281XX_PIN_SRI_C 193
+#define BCM281XX_PIN_SRI_D 194
+#define BCM281XX_PIN_SRI_E 195
+#define BCM281XX_PIN_SSP_EXTCLK 196
+#define BCM281XX_PIN_SSP0_CLK 197
+#define BCM281XX_PIN_SSP0_FS 198
+#define BCM281XX_PIN_SSP0_RXD 199
+#define BCM281XX_PIN_SSP0_TXD 200
+#define BCM281XX_PIN_SSP2_CLK 201
+#define BCM281XX_PIN_SSP2_FS_0 202
+#define BCM281XX_PIN_SSP2_FS_1 203
+#define BCM281XX_PIN_SSP2_FS_2 204
+#define BCM281XX_PIN_SSP2_FS_3 205
+#define BCM281XX_PIN_SSP2_RXD_0 206
+#define BCM281XX_PIN_SSP2_RXD_1 207
+#define BCM281XX_PIN_SSP2_TXD_0 208
+#define BCM281XX_PIN_SSP2_TXD_1 209
+#define BCM281XX_PIN_SSP3_CLK 210
+#define BCM281XX_PIN_SSP3_FS 211
+#define BCM281XX_PIN_SSP3_RXD 212
+#define BCM281XX_PIN_SSP3_TXD 213
+#define BCM281XX_PIN_SSP4_CLK 214
+#define BCM281XX_PIN_SSP4_FS 215
+#define BCM281XX_PIN_SSP4_RXD 216
+#define BCM281XX_PIN_SSP4_TXD 217
+#define BCM281XX_PIN_SSP5_CLK 218
+#define BCM281XX_PIN_SSP5_FS 219
+#define BCM281XX_PIN_SSP5_RXD 220
+#define BCM281XX_PIN_SSP5_TXD 221
+#define BCM281XX_PIN_SSP6_CLK 222
+#define BCM281XX_PIN_SSP6_FS 223
+#define BCM281XX_PIN_SSP6_RXD 224
+#define BCM281XX_PIN_SSP6_TXD 225
+#define BCM281XX_PIN_STAT_1 226
+#define BCM281XX_PIN_STAT_2 227
+#define BCM281XX_PIN_SYSCLKEN 228
+#define BCM281XX_PIN_TRACECLK 229
+#define BCM281XX_PIN_TRACEDT00 230
+#define BCM281XX_PIN_TRACEDT01 231
+#define BCM281XX_PIN_TRACEDT02 232
+#define BCM281XX_PIN_TRACEDT03 233
+#define BCM281XX_PIN_TRACEDT04 234
+#define BCM281XX_PIN_TRACEDT05 235
+#define BCM281XX_PIN_TRACEDT06 236
+#define BCM281XX_PIN_TRACEDT07 237
+#define BCM281XX_PIN_TRACEDT08 238
+#define BCM281XX_PIN_TRACEDT09 239
+#define BCM281XX_PIN_TRACEDT10 240
+#define BCM281XX_PIN_TRACEDT11 241
+#define BCM281XX_PIN_TRACEDT12 242
+#define BCM281XX_PIN_TRACEDT13 243
+#define BCM281XX_PIN_TRACEDT14 244
+#define BCM281XX_PIN_TRACEDT15 245
+#define BCM281XX_PIN_TXDATA3G0 246
+#define BCM281XX_PIN_TXPWRIND 247
+#define BCM281XX_PIN_UARTB1_UCTS 248
+#define BCM281XX_PIN_UARTB1_URTS 249
+#define BCM281XX_PIN_UARTB1_URXD 250
+#define BCM281XX_PIN_UARTB1_UTXD 251
+#define BCM281XX_PIN_UARTB2_URXD 252
+#define BCM281XX_PIN_UARTB2_UTXD 253
+#define BCM281XX_PIN_UARTB3_UCTS 254
+#define BCM281XX_PIN_UARTB3_URTS 255
+#define BCM281XX_PIN_UARTB3_URXD 256
+#define BCM281XX_PIN_UARTB3_UTXD 257
+#define BCM281XX_PIN_UARTB4_UCTS 258
+#define BCM281XX_PIN_UARTB4_URTS 259
+#define BCM281XX_PIN_UARTB4_URXD 260
+#define BCM281XX_PIN_UARTB4_UTXD 261
+#define BCM281XX_PIN_VC_CAM1_SCL 262
+#define BCM281XX_PIN_VC_CAM1_SDA 263
+#define BCM281XX_PIN_VC_CAM2_SCL 264
+#define BCM281XX_PIN_VC_CAM2_SDA 265
+#define BCM281XX_PIN_VC_CAM3_SCL 266
+#define BCM281XX_PIN_VC_CAM3_SDA 267
+
+#define BCM281XX_PIN_DESC(a, b, c) \
+ { .number = a, .name = b, .drv_data = &c##_pin }
+
+/*
+ * Pin description definition. The order here must be the same as defined in
+ * the PADCTRLREG block in the RDB, since the pin number is used as an index
+ * into this array.
+ */
+static const struct pinctrl_pin_desc bcm281xx_pinctrl_pins[] = {
+ BCM281XX_PIN_DESC(BCM281XX_PIN_ADCSYNC, "adcsync", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_BAT_RM, "bat_rm", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SCL, "bsc1_scl", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SDA, "bsc1_sda", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SCL, "bsc2_scl", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SDA, "bsc2_sda", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLASSGPWR, "classgpwr", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLK_CX8, "clk_cx8", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_0, "clkout_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_1, "clkout_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_2, "clkout_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_3, "clkout_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_0, "clkreq_in_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_1, "clkreq_in_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ1, "cws_sys_req1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ2, "cws_sys_req2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ3, "cws_sys_req3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_CLK, "digmic1_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_DQ, "digmic1_dq", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_CLK, "digmic2_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_DQ, "digmic2_dq", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN13, "gpen13", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN14, "gpen14", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN15, "gpen15", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO00, "gpio00", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO01, "gpio01", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO02, "gpio02", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO03, "gpio03", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO04, "gpio04", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO05, "gpio05", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO06, "gpio06", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO07, "gpio07", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO08, "gpio08", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO09, "gpio09", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO10, "gpio10", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO11, "gpio11", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO12, "gpio12", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO13, "gpio13", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO14, "gpio14", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_PABLANK, "gps_pablank", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_TMARK, "gps_tmark", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SCL, "hdmi_scl", hdmi),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SDA, "hdmi_sda", hdmi),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DM, "ic_dm", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DP, "ic_dp", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_0, "kp_col_ip_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_1, "kp_col_ip_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_2, "kp_col_ip_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_3, "kp_col_ip_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_0, "kp_row_op_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_1, "kp_row_op_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_2, "kp_row_op_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_3, "kp_row_op_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_0, "lcd_b_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_1, "lcd_b_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_2, "lcd_b_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_3, "lcd_b_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_4, "lcd_b_4", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_5, "lcd_b_5", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_6, "lcd_b_6", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_7, "lcd_b_7", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_0, "lcd_g_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_1, "lcd_g_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_2, "lcd_g_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_3, "lcd_g_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_4, "lcd_g_4", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_5, "lcd_g_5", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_6, "lcd_g_6", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_7, "lcd_g_7", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_HSYNC, "lcd_hsync", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_OE, "lcd_oe", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_PCLK, "lcd_pclk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_0, "lcd_r_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_1, "lcd_r_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_2, "lcd_r_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_3, "lcd_r_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_4, "lcd_r_4", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_5, "lcd_r_5", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_6, "lcd_r_6", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_7, "lcd_r_7", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_VSYNC, "lcd_vsync", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO0, "mdmgpio0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO1, "mdmgpio1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO2, "mdmgpio2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO3, "mdmgpio3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO4, "mdmgpio4", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO5, "mdmgpio5", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO6, "mdmgpio6", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO7, "mdmgpio7", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO8, "mdmgpio8", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_0, "mphi_data_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_1, "mphi_data_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_2, "mphi_data_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_3, "mphi_data_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_4, "mphi_data_4", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_5, "mphi_data_5", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_6, "mphi_data_6", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_7, "mphi_data_7", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_8, "mphi_data_8", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_9, "mphi_data_9", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_10, "mphi_data_10", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_11, "mphi_data_11", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_12, "mphi_data_12", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_13, "mphi_data_13", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_14, "mphi_data_14", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_15, "mphi_data_15", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HA0, "mphi_ha0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT0, "mphi_hat0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT1, "mphi_hat1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE0_N, "mphi_hce0_n", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE1_N, "mphi_hce1_n", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HRD_N, "mphi_hrd_n", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HWR_N, "mphi_hwr_n", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN0, "mphi_run0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN1, "mphi_run1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_CLK, "mtx_scan_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_DATA, "mtx_scan_data", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_0, "nand_ad_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_1, "nand_ad_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_2, "nand_ad_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_3, "nand_ad_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_4, "nand_ad_4", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_5, "nand_ad_5", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_6, "nand_ad_6", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_7, "nand_ad_7", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_ALE, "nand_ale", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_0, "nand_cen_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_1, "nand_cen_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CLE, "nand_cle", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_OEN, "nand_oen", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_0, "nand_rdy_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_1, "nand_rdy_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WEN, "nand_wen", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WP, "nand_wp", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_PC1, "pc1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_PC2, "pc2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_INT, "pmu_int", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SCL, "pmu_scl", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SDA, "pmu_sda", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RFST2G_MTSLOTEN3G, "rfst2g_mtsloten3g",
+ std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RX_CTL, "rgmii_0_rx_ctl", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXC, "rgmii_0_rxc", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_0, "rgmii_0_rxd_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_1, "rgmii_0_rxd_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_2, "rgmii_0_rxd_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_3, "rgmii_0_rxd_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TX_CTL, "rgmii_0_tx_ctl", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXC, "rgmii_0_txc", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_0, "rgmii_0_txd_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_1, "rgmii_0_txd_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_2, "rgmii_0_txd_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_3, "rgmii_0_txd_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RX_CTL, "rgmii_1_rx_ctl", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXC, "rgmii_1_rxc", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_0, "rgmii_1_rxd_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_1, "rgmii_1_rxd_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_2, "rgmii_1_rxd_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_3, "rgmii_1_rxd_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TX_CTL, "rgmii_1_tx_ctl", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXC, "rgmii_1_txc", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_0, "rgmii_1_txd_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_1, "rgmii_1_txd_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_2, "rgmii_1_txd_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_3, "rgmii_1_txd_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_0, "rgmii_gpio_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_1, "rgmii_gpio_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_2, "rgmii_gpio_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_3, "rgmii_gpio_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RTXDATA2G_TXDATA3G1,
+ "rtxdata2g_txdata3g1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RTXEN2G_TXDATA3G2, "rtxen2g_txdata3g2",
+ std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G0, "rxdata3g0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G1, "rxdata3g1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G2, "rxdata3g2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CLK, "sdio1_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CMD, "sdio1_cmd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_0, "sdio1_data_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_1, "sdio1_data_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_2, "sdio1_data_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_3, "sdio1_data_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CLK, "sdio4_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CMD, "sdio4_cmd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_0, "sdio4_data_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_1, "sdio4_data_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_2, "sdio4_data_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_3, "sdio4_data_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_CLK, "sim_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DATA, "sim_data", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DET, "sim_det", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_RESETN, "sim_resetn", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_CLK, "sim2_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DATA, "sim2_data", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DET, "sim2_det", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_RESETN, "sim2_resetn", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_C, "sri_c", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_D, "sri_d", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_E, "sri_e", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP_EXTCLK, "ssp_extclk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_CLK, "ssp0_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_FS, "ssp0_fs", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_RXD, "ssp0_rxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_TXD, "ssp0_txd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_CLK, "ssp2_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_0, "ssp2_fs_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_1, "ssp2_fs_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_2, "ssp2_fs_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_3, "ssp2_fs_3", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_0, "ssp2_rxd_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_1, "ssp2_rxd_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_0, "ssp2_txd_0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_1, "ssp2_txd_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_CLK, "ssp3_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_FS, "ssp3_fs", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_RXD, "ssp3_rxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_TXD, "ssp3_txd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_CLK, "ssp4_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_FS, "ssp4_fs", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_RXD, "ssp4_rxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_TXD, "ssp4_txd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_CLK, "ssp5_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_FS, "ssp5_fs", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_RXD, "ssp5_rxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_TXD, "ssp5_txd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_CLK, "ssp6_clk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_FS, "ssp6_fs", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_RXD, "ssp6_rxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_TXD, "ssp6_txd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_1, "stat_1", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_2, "stat_2", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_SYSCLKEN, "sysclken", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACECLK, "traceclk", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT00, "tracedt00", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT01, "tracedt01", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT02, "tracedt02", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT03, "tracedt03", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT04, "tracedt04", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT05, "tracedt05", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT06, "tracedt06", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT07, "tracedt07", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT08, "tracedt08", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT09, "tracedt09", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT10, "tracedt10", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT11, "tracedt11", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT12, "tracedt12", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT13, "tracedt13", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT14, "tracedt14", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT15, "tracedt15", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TXDATA3G0, "txdata3g0", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_TXPWRIND, "txpwrind", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UCTS, "uartb1_ucts", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URTS, "uartb1_urts", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URXD, "uartb1_urxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UTXD, "uartb1_utxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_URXD, "uartb2_urxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_UTXD, "uartb2_utxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UCTS, "uartb3_ucts", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URTS, "uartb3_urts", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URXD, "uartb3_urxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UTXD, "uartb3_utxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UCTS, "uartb4_ucts", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URTS, "uartb4_urts", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URXD, "uartb4_urxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UTXD, "uartb4_utxd", std),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SCL, "vc_cam1_scl", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SDA, "vc_cam1_sda", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SCL, "vc_cam2_scl", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SDA, "vc_cam2_sda", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SCL, "vc_cam3_scl", i2c),
+ BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SDA, "vc_cam3_sda", i2c),
+};
+
+static const char * const bcm281xx_alt_groups[] = {
+ "adcsync",
+ "bat_rm",
+ "bsc1_scl",
+ "bsc1_sda",
+ "bsc2_scl",
+ "bsc2_sda",
+ "classgpwr",
+ "clk_cx8",
+ "clkout_0",
+ "clkout_1",
+ "clkout_2",
+ "clkout_3",
+ "clkreq_in_0",
+ "clkreq_in_1",
+ "cws_sys_req1",
+ "cws_sys_req2",
+ "cws_sys_req3",
+ "digmic1_clk",
+ "digmic1_dq",
+ "digmic2_clk",
+ "digmic2_dq",
+ "gpen13",
+ "gpen14",
+ "gpen15",
+ "gpio00",
+ "gpio01",
+ "gpio02",
+ "gpio03",
+ "gpio04",
+ "gpio05",
+ "gpio06",
+ "gpio07",
+ "gpio08",
+ "gpio09",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gps_pablank",
+ "gps_tmark",
+ "hdmi_scl",
+ "hdmi_sda",
+ "ic_dm",
+ "ic_dp",
+ "kp_col_ip_0",
+ "kp_col_ip_1",
+ "kp_col_ip_2",
+ "kp_col_ip_3",
+ "kp_row_op_0",
+ "kp_row_op_1",
+ "kp_row_op_2",
+ "kp_row_op_3",
+ "lcd_b_0",
+ "lcd_b_1",
+ "lcd_b_2",
+ "lcd_b_3",
+ "lcd_b_4",
+ "lcd_b_5",
+ "lcd_b_6",
+ "lcd_b_7",
+ "lcd_g_0",
+ "lcd_g_1",
+ "lcd_g_2",
+ "lcd_g_3",
+ "lcd_g_4",
+ "lcd_g_5",
+ "lcd_g_6",
+ "lcd_g_7",
+ "lcd_hsync",
+ "lcd_oe",
+ "lcd_pclk",
+ "lcd_r_0",
+ "lcd_r_1",
+ "lcd_r_2",
+ "lcd_r_3",
+ "lcd_r_4",
+ "lcd_r_5",
+ "lcd_r_6",
+ "lcd_r_7",
+ "lcd_vsync",
+ "mdmgpio0",
+ "mdmgpio1",
+ "mdmgpio2",
+ "mdmgpio3",
+ "mdmgpio4",
+ "mdmgpio5",
+ "mdmgpio6",
+ "mdmgpio7",
+ "mdmgpio8",
+ "mphi_data_0",
+ "mphi_data_1",
+ "mphi_data_2",
+ "mphi_data_3",
+ "mphi_data_4",
+ "mphi_data_5",
+ "mphi_data_6",
+ "mphi_data_7",
+ "mphi_data_8",
+ "mphi_data_9",
+ "mphi_data_10",
+ "mphi_data_11",
+ "mphi_data_12",
+ "mphi_data_13",
+ "mphi_data_14",
+ "mphi_data_15",
+ "mphi_ha0",
+ "mphi_hat0",
+ "mphi_hat1",
+ "mphi_hce0_n",
+ "mphi_hce1_n",
+ "mphi_hrd_n",
+ "mphi_hwr_n",
+ "mphi_run0",
+ "mphi_run1",
+ "mtx_scan_clk",
+ "mtx_scan_data",
+ "nand_ad_0",
+ "nand_ad_1",
+ "nand_ad_2",
+ "nand_ad_3",
+ "nand_ad_4",
+ "nand_ad_5",
+ "nand_ad_6",
+ "nand_ad_7",
+ "nand_ale",
+ "nand_cen_0",
+ "nand_cen_1",
+ "nand_cle",
+ "nand_oen",
+ "nand_rdy_0",
+ "nand_rdy_1",
+ "nand_wen",
+ "nand_wp",
+ "pc1",
+ "pc2",
+ "pmu_int",
+ "pmu_scl",
+ "pmu_sda",
+ "rfst2g_mtsloten3g",
+ "rgmii_0_rx_ctl",
+ "rgmii_0_rxc",
+ "rgmii_0_rxd_0",
+ "rgmii_0_rxd_1",
+ "rgmii_0_rxd_2",
+ "rgmii_0_rxd_3",
+ "rgmii_0_tx_ctl",
+ "rgmii_0_txc",
+ "rgmii_0_txd_0",
+ "rgmii_0_txd_1",
+ "rgmii_0_txd_2",
+ "rgmii_0_txd_3",
+ "rgmii_1_rx_ctl",
+ "rgmii_1_rxc",
+ "rgmii_1_rxd_0",
+ "rgmii_1_rxd_1",
+ "rgmii_1_rxd_2",
+ "rgmii_1_rxd_3",
+ "rgmii_1_tx_ctl",
+ "rgmii_1_txc",
+ "rgmii_1_txd_0",
+ "rgmii_1_txd_1",
+ "rgmii_1_txd_2",
+ "rgmii_1_txd_3",
+ "rgmii_gpio_0",
+ "rgmii_gpio_1",
+ "rgmii_gpio_2",
+ "rgmii_gpio_3",
+ "rtxdata2g_txdata3g1",
+ "rtxen2g_txdata3g2",
+ "rxdata3g0",
+ "rxdata3g1",
+ "rxdata3g2",
+ "sdio1_clk",
+ "sdio1_cmd",
+ "sdio1_data_0",
+ "sdio1_data_1",
+ "sdio1_data_2",
+ "sdio1_data_3",
+ "sdio4_clk",
+ "sdio4_cmd",
+ "sdio4_data_0",
+ "sdio4_data_1",
+ "sdio4_data_2",
+ "sdio4_data_3",
+ "sim_clk",
+ "sim_data",
+ "sim_det",
+ "sim_resetn",
+ "sim2_clk",
+ "sim2_data",
+ "sim2_det",
+ "sim2_resetn",
+ "sri_c",
+ "sri_d",
+ "sri_e",
+ "ssp_extclk",
+ "ssp0_clk",
+ "ssp0_fs",
+ "ssp0_rxd",
+ "ssp0_txd",
+ "ssp2_clk",
+ "ssp2_fs_0",
+ "ssp2_fs_1",
+ "ssp2_fs_2",
+ "ssp2_fs_3",
+ "ssp2_rxd_0",
+ "ssp2_rxd_1",
+ "ssp2_txd_0",
+ "ssp2_txd_1",
+ "ssp3_clk",
+ "ssp3_fs",
+ "ssp3_rxd",
+ "ssp3_txd",
+ "ssp4_clk",
+ "ssp4_fs",
+ "ssp4_rxd",
+ "ssp4_txd",
+ "ssp5_clk",
+ "ssp5_fs",
+ "ssp5_rxd",
+ "ssp5_txd",
+ "ssp6_clk",
+ "ssp6_fs",
+ "ssp6_rxd",
+ "ssp6_txd",
+ "stat_1",
+ "stat_2",
+ "sysclken",
+ "traceclk",
+ "tracedt00",
+ "tracedt01",
+ "tracedt02",
+ "tracedt03",
+ "tracedt04",
+ "tracedt05",
+ "tracedt06",
+ "tracedt07",
+ "tracedt08",
+ "tracedt09",
+ "tracedt10",
+ "tracedt11",
+ "tracedt12",
+ "tracedt13",
+ "tracedt14",
+ "tracedt15",
+ "txdata3g0",
+ "txpwrind",
+ "uartb1_ucts",
+ "uartb1_urts",
+ "uartb1_urxd",
+ "uartb1_utxd",
+ "uartb2_urxd",
+ "uartb2_utxd",
+ "uartb3_ucts",
+ "uartb3_urts",
+ "uartb3_urxd",
+ "uartb3_utxd",
+ "uartb4_ucts",
+ "uartb4_urts",
+ "uartb4_urxd",
+ "uartb4_utxd",
+ "vc_cam1_scl",
+ "vc_cam1_sda",
+ "vc_cam2_scl",
+ "vc_cam2_sda",
+ "vc_cam3_scl",
+ "vc_cam3_sda",
+};
+
+/* Every pin can implement all ALT1-ALT4 functions */
+#define BCM281XX_PIN_FUNCTION(fcn_name) \
+{ \
+ .name = #fcn_name, \
+ .groups = bcm281xx_alt_groups, \
+ .ngroups = ARRAY_SIZE(bcm281xx_alt_groups), \
+}
+
+static const struct bcm281xx_pin_function bcm281xx_functions[] = {
+ BCM281XX_PIN_FUNCTION(alt1),
+ BCM281XX_PIN_FUNCTION(alt2),
+ BCM281XX_PIN_FUNCTION(alt3),
+ BCM281XX_PIN_FUNCTION(alt4),
+};
+
+static struct bcm281xx_pinctrl_data bcm281xx_pinctrl = {
+ .pins = bcm281xx_pinctrl_pins,
+ .npins = ARRAY_SIZE(bcm281xx_pinctrl_pins),
+ .functions = bcm281xx_functions,
+ .nfunctions = ARRAY_SIZE(bcm281xx_functions),
+};
+
+static inline enum bcm281xx_pin_type pin_type_get(struct pinctrl_dev *pctldev,
+ unsigned pin)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+ if (pin >= pdata->npins)
+ return BCM281XX_PIN_TYPE_UNKNOWN;
+
+ return *(enum bcm281xx_pin_type *)(pdata->pins[pin].drv_data);
+}
+
+#define BCM281XX_PIN_SHIFT(type, param) \
+ (BCM281XX_ ## type ## _PIN_REG_ ## param ## _SHIFT)
+
+#define BCM281XX_PIN_MASK(type, param) \
+ (BCM281XX_ ## type ## _PIN_REG_ ## param ## _MASK)
+
+/*
+ * This helper function is used to build up the value and mask used to write to
+ * a pin register, but does not actually write to the register.
+ */
+static inline void bcm281xx_pin_update(u32 *reg_val, u32 *reg_mask,
+ u32 param_val, u32 param_shift,
+ u32 param_mask)
+{
+ *reg_val &= ~param_mask;
+ *reg_val |= (param_val << param_shift) & param_mask;
+ *reg_mask |= param_mask;
+}
+
+static struct regmap_config bcm281xx_pinctrl_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = BCM281XX_PIN_VC_CAM3_SDA,
+};
+
+static int bcm281xx_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+ return pdata->npins;
+}
+
+static const char *bcm281xx_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+ return pdata->pins[group].name;
+}
+
+static int bcm281xx_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+ *pins = &pdata->pins[group].number;
+ *num_pins = 1;
+
+ return 0;
+}
+
+static void bcm281xx_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
+ struct seq_file *s,
+ unsigned offset)
+{
+ seq_printf(s, " %s", dev_name(pctldev->dev));
+}
+
+static struct pinctrl_ops bcm281xx_pinctrl_ops = {
+ .get_groups_count = bcm281xx_pinctrl_get_groups_count,
+ .get_group_name = bcm281xx_pinctrl_get_group_name,
+ .get_group_pins = bcm281xx_pinctrl_get_group_pins,
+ .pin_dbg_show = bcm281xx_pinctrl_pin_dbg_show,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+static int bcm281xx_pinctrl_get_fcns_count(struct pinctrl_dev *pctldev)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+ return pdata->nfunctions;
+}
+
+static const char *bcm281xx_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev,
+ unsigned function)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+ return pdata->functions[function].name;
+}
+
+static int bcm281xx_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev,
+ unsigned function,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = pdata->functions[function].groups;
+ *num_groups = pdata->functions[function].ngroups;
+
+ return 0;
+}
+
+static int bcm281xx_pinmux_set(struct pinctrl_dev *pctldev,
+ unsigned function,
+ unsigned group)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+ const struct bcm281xx_pin_function *f = &pdata->functions[function];
+ u32 offset = 4 * pdata->pins[group].number;
+ int rc = 0;
+
+ dev_dbg(pctldev->dev,
+ "%s(): Enable function %s (%d) of pin %s (%d) @offset 0x%x.\n",
+ __func__, f->name, function, pdata->pins[group].name,
+ pdata->pins[group].number, offset);
+
+ rc = regmap_update_bits(pdata->regmap, offset,
+ BCM281XX_PIN_REG_F_SEL_MASK,
+ function << BCM281XX_PIN_REG_F_SEL_SHIFT);
+ if (rc)
+ dev_err(pctldev->dev,
+ "Error updating register for pin %s (%d).\n",
+ pdata->pins[group].name, pdata->pins[group].number);
+
+ return rc;
+}
+
+static struct pinmux_ops bcm281xx_pinctrl_pinmux_ops = {
+ .get_functions_count = bcm281xx_pinctrl_get_fcns_count,
+ .get_function_name = bcm281xx_pinctrl_get_fcn_name,
+ .get_function_groups = bcm281xx_pinctrl_get_fcn_groups,
+ .set_mux = bcm281xx_pinmux_set,
+};
+
+static int bcm281xx_pinctrl_pin_config_get(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long *config)
+{
+ return -ENOTSUPP;
+}
+
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_std_pin_update(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long *configs,
+ unsigned num_configs,
+ u32 *val,
+ u32 *mask)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+ int i;
+ enum pin_config_param param;
+ u16 arg;
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+ arg = (arg >= 1 ? 1 : 0);
+ bcm281xx_pin_update(val, mask, arg,
+ BCM281XX_PIN_SHIFT(STD, HYST),
+ BCM281XX_PIN_MASK(STD, HYST));
+ break;
+ /*
+ * The pin bias can only be one of pull-up, pull-down, or
+ * disable. The user does not need to specify a value for the
+ * property, and the default value from pinconf-generic is
+ * ignored.
+ */
+ case PIN_CONFIG_BIAS_DISABLE:
+ bcm281xx_pin_update(val, mask, 0,
+ BCM281XX_PIN_SHIFT(STD, PULL_UP),
+ BCM281XX_PIN_MASK(STD, PULL_UP));
+ bcm281xx_pin_update(val, mask, 0,
+ BCM281XX_PIN_SHIFT(STD, PULL_DN),
+ BCM281XX_PIN_MASK(STD, PULL_DN));
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_UP:
+ bcm281xx_pin_update(val, mask, 1,
+ BCM281XX_PIN_SHIFT(STD, PULL_UP),
+ BCM281XX_PIN_MASK(STD, PULL_UP));
+ bcm281xx_pin_update(val, mask, 0,
+ BCM281XX_PIN_SHIFT(STD, PULL_DN),
+ BCM281XX_PIN_MASK(STD, PULL_DN));
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ bcm281xx_pin_update(val, mask, 0,
+ BCM281XX_PIN_SHIFT(STD, PULL_UP),
+ BCM281XX_PIN_MASK(STD, PULL_UP));
+ bcm281xx_pin_update(val, mask, 1,
+ BCM281XX_PIN_SHIFT(STD, PULL_DN),
+ BCM281XX_PIN_MASK(STD, PULL_DN));
+ break;
+
+ case PIN_CONFIG_SLEW_RATE:
+ arg = (arg >= 1 ? 1 : 0);
+ bcm281xx_pin_update(val, mask, arg,
+ BCM281XX_PIN_SHIFT(STD, SLEW),
+ BCM281XX_PIN_MASK(STD, SLEW));
+ break;
+
+ case PIN_CONFIG_INPUT_ENABLE:
+ /* inversed since register is for input _disable_ */
+ arg = (arg >= 1 ? 0 : 1);
+ bcm281xx_pin_update(val, mask, arg,
+ BCM281XX_PIN_SHIFT(STD, INPUT_DIS),
+ BCM281XX_PIN_MASK(STD, INPUT_DIS));
+ break;
+
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ /* Valid range is 2-16 mA, even numbers only */
+ if ((arg < 2) || (arg > 16) || (arg % 2)) {
+ dev_err(pctldev->dev,
+ "Invalid Drive Strength value (%d) for "
+ "pin %s (%d). Valid values are "
+ "(2..16) mA, even numbers only.\n",
+ arg, pdata->pins[pin].name, pin);
+ return -EINVAL;
+ }
+ bcm281xx_pin_update(val, mask, (arg/2)-1,
+ BCM281XX_PIN_SHIFT(STD, DRV_STR),
+ BCM281XX_PIN_MASK(STD, DRV_STR));
+ break;
+
+ default:
+ dev_err(pctldev->dev,
+ "Unrecognized pin config %d for pin %s (%d).\n",
+ param, pdata->pins[pin].name, pin);
+ return -EINVAL;
+
+ } /* switch config */
+ } /* for each config */
+
+ return 0;
+}
+
+/*
+ * The pull-up strength for an I2C pin is represented by bits 4-6 in the
+ * register with the following mapping:
+ * 0b000: No pull-up
+ * 0b001: 1200 Ohm
+ * 0b010: 1800 Ohm
+ * 0b011: 720 Ohm
+ * 0b100: 2700 Ohm
+ * 0b101: 831 Ohm
+ * 0b110: 1080 Ohm
+ * 0b111: 568 Ohm
+ * This array maps pull-up strength in Ohms to register values (1+index).
+ */
+static const u16 bcm281xx_pullup_map[] = {
+ 1200, 1800, 720, 2700, 831, 1080, 568
+};
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_i2c_pin_update(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long *configs,
+ unsigned num_configs,
+ u32 *val,
+ u32 *mask)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+ int i, j;
+ enum pin_config_param param;
+ u16 arg;
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_PULL_UP:
+ for (j = 0; j < ARRAY_SIZE(bcm281xx_pullup_map); j++)
+ if (bcm281xx_pullup_map[j] == arg)
+ break;
+
+ if (j == ARRAY_SIZE(bcm281xx_pullup_map)) {
+ dev_err(pctldev->dev,
+ "Invalid pull-up value (%d) for pin %s "
+ "(%d). Valid values are 568, 720, 831, "
+ "1080, 1200, 1800, 2700 Ohms.\n",
+ arg, pdata->pins[pin].name, pin);
+ return -EINVAL;
+ }
+
+ bcm281xx_pin_update(val, mask, j+1,
+ BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR),
+ BCM281XX_PIN_MASK(I2C, PULL_UP_STR));
+ break;
+
+ case PIN_CONFIG_BIAS_DISABLE:
+ bcm281xx_pin_update(val, mask, 0,
+ BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR),
+ BCM281XX_PIN_MASK(I2C, PULL_UP_STR));
+ break;
+
+ case PIN_CONFIG_SLEW_RATE:
+ arg = (arg >= 1 ? 1 : 0);
+ bcm281xx_pin_update(val, mask, arg,
+ BCM281XX_PIN_SHIFT(I2C, SLEW),
+ BCM281XX_PIN_MASK(I2C, SLEW));
+ break;
+
+ case PIN_CONFIG_INPUT_ENABLE:
+ /* inversed since register is for input _disable_ */
+ arg = (arg >= 1 ? 0 : 1);
+ bcm281xx_pin_update(val, mask, arg,
+ BCM281XX_PIN_SHIFT(I2C, INPUT_DIS),
+ BCM281XX_PIN_MASK(I2C, INPUT_DIS));
+ break;
+
+ default:
+ dev_err(pctldev->dev,
+ "Unrecognized pin config %d for pin %s (%d).\n",
+ param, pdata->pins[pin].name, pin);
+ return -EINVAL;
+
+ } /* switch config */
+ } /* for each config */
+
+ return 0;
+}
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_hdmi_pin_update(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long *configs,
+ unsigned num_configs,
+ u32 *val,
+ u32 *mask)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+ int i;
+ enum pin_config_param param;
+ u16 arg;
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ case PIN_CONFIG_SLEW_RATE:
+ arg = (arg >= 1 ? 1 : 0);
+ bcm281xx_pin_update(val, mask, arg,
+ BCM281XX_PIN_SHIFT(HDMI, MODE),
+ BCM281XX_PIN_MASK(HDMI, MODE));
+ break;
+
+ case PIN_CONFIG_INPUT_ENABLE:
+ /* inversed since register is for input _disable_ */
+ arg = (arg >= 1 ? 0 : 1);
+ bcm281xx_pin_update(val, mask, arg,
+ BCM281XX_PIN_SHIFT(HDMI, INPUT_DIS),
+ BCM281XX_PIN_MASK(HDMI, INPUT_DIS));
+ break;
+
+ default:
+ dev_err(pctldev->dev,
+ "Unrecognized pin config %d for pin %s (%d).\n",
+ param, pdata->pins[pin].name, pin);
+ return -EINVAL;
+
+ } /* switch config */
+ } /* for each config */
+
+ return 0;
+}
+
+static int bcm281xx_pinctrl_pin_config_set(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long *configs,
+ unsigned num_configs)
+{
+ struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+ enum bcm281xx_pin_type pin_type;
+ u32 offset = 4 * pin;
+ u32 cfg_val, cfg_mask;
+ int rc;
+
+ cfg_val = 0;
+ cfg_mask = 0;
+ pin_type = pin_type_get(pctldev, pin);
+
+ /* Different pins have different configuration options */
+ switch (pin_type) {
+ case BCM281XX_PIN_TYPE_STD:
+ rc = bcm281xx_std_pin_update(pctldev, pin, configs,
+ num_configs, &cfg_val, &cfg_mask);
+ break;
+
+ case BCM281XX_PIN_TYPE_I2C:
+ rc = bcm281xx_i2c_pin_update(pctldev, pin, configs,
+ num_configs, &cfg_val, &cfg_mask);
+ break;
+
+ case BCM281XX_PIN_TYPE_HDMI:
+ rc = bcm281xx_hdmi_pin_update(pctldev, pin, configs,
+ num_configs, &cfg_val, &cfg_mask);
+ break;
+
+ default:
+ dev_err(pctldev->dev, "Unknown pin type for pin %s (%d).\n",
+ pdata->pins[pin].name, pin);
+ return -EINVAL;
+
+ } /* switch pin type */
+
+ if (rc)
+ return rc;
+
+ dev_dbg(pctldev->dev,
+ "%s(): Set pin %s (%d) with config 0x%x, mask 0x%x\n",
+ __func__, pdata->pins[pin].name, pin, cfg_val, cfg_mask);
+
+ rc = regmap_update_bits(pdata->regmap, offset, cfg_mask, cfg_val);
+ if (rc) {
+ dev_err(pctldev->dev,
+ "Error updating register for pin %s (%d).\n",
+ pdata->pins[pin].name, pin);
+ return rc;
+ }
+
+ return 0;
+}
+
+static struct pinconf_ops bcm281xx_pinctrl_pinconf_ops = {
+ .pin_config_get = bcm281xx_pinctrl_pin_config_get,
+ .pin_config_set = bcm281xx_pinctrl_pin_config_set,
+};
+
+static struct pinctrl_desc bcm281xx_pinctrl_desc = {
+ /* name, pins, npins members initialized in probe function */
+ .pctlops = &bcm281xx_pinctrl_ops,
+ .pmxops = &bcm281xx_pinctrl_pinmux_ops,
+ .confops = &bcm281xx_pinctrl_pinconf_ops,
+ .owner = THIS_MODULE,
+};
+
+static int __init bcm281xx_pinctrl_probe(struct platform_device *pdev)
+{
+ struct bcm281xx_pinctrl_data *pdata = &bcm281xx_pinctrl;
+ struct resource *res;
+ struct pinctrl_dev *pctl;
+
+ /* So far We can assume there is only 1 bank of registers */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pdata->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pdata->reg_base)) {
+ dev_err(&pdev->dev, "Failed to ioremap MEM resource\n");
+ return -ENODEV;
+ }
+
+ /* Initialize the dynamic part of pinctrl_desc */
+ pdata->regmap = devm_regmap_init_mmio(&pdev->dev, pdata->reg_base,
+ &bcm281xx_pinctrl_regmap_config);
+ if (IS_ERR(pdata->regmap)) {
+ dev_err(&pdev->dev, "Regmap MMIO init failed.\n");
+ return -ENODEV;
+ }
+
+ bcm281xx_pinctrl_desc.name = dev_name(&pdev->dev);
+ bcm281xx_pinctrl_desc.pins = bcm281xx_pinctrl.pins;
+ bcm281xx_pinctrl_desc.npins = bcm281xx_pinctrl.npins;
+
+ pctl = pinctrl_register(&bcm281xx_pinctrl_desc,
+ &pdev->dev,
+ pdata);
+ if (!pctl) {
+ dev_err(&pdev->dev, "Failed to register pinctrl\n");
+ return -ENODEV;
+ }
+
+ platform_set_drvdata(pdev, pdata);
+
+ return 0;
+}
+
+static struct of_device_id bcm281xx_pinctrl_of_match[] = {
+ { .compatible = "brcm,bcm11351-pinctrl", },
+ { },
+};
+
+static struct platform_driver bcm281xx_pinctrl_driver = {
+ .driver = {
+ .name = "bcm281xx-pinctrl",
+ .of_match_table = bcm281xx_pinctrl_of_match,
+ },
+};
+
+module_platform_driver_probe(bcm281xx_pinctrl_driver, bcm281xx_pinctrl_probe);
+
+MODULE_AUTHOR("Broadcom Corporation <[email protected]>");
+MODULE_AUTHOR("Sherman Yin <[email protected]>");
+MODULE_DESCRIPTION("Broadcom BCM281xx pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
new file mode 100644
index 0000000..9aa8a3f
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -0,0 +1,1072 @@
+/*
+ * Driver for Broadcom BCM2835 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren
+ *
+ * This driver is inspired by:
+ * pinctrl-nomadik.c, please see original file for copyright information
+ * pinctrl-tegra.c, please see original file for copyright information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#define MODULE_NAME "pinctrl-bcm2835"
+#define BCM2835_NUM_GPIOS 54
+#define BCM2835_NUM_BANKS 2
+
+#define BCM2835_PIN_BITMAP_SZ \
+ DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8)
+
+/* GPIO register offsets */
+#define GPFSEL0 0x0 /* Function Select */
+#define GPSET0 0x1c /* Pin Output Set */
+#define GPCLR0 0x28 /* Pin Output Clear */
+#define GPLEV0 0x34 /* Pin Level */
+#define GPEDS0 0x40 /* Pin Event Detect Status */
+#define GPREN0 0x4c /* Pin Rising Edge Detect Enable */
+#define GPFEN0 0x58 /* Pin Falling Edge Detect Enable */
+#define GPHEN0 0x64 /* Pin High Detect Enable */
+#define GPLEN0 0x70 /* Pin Low Detect Enable */
+#define GPAREN0 0x7c /* Pin Async Rising Edge Detect */
+#define GPAFEN0 0x88 /* Pin Async Falling Edge Detect */
+#define GPPUD 0x94 /* Pin Pull-up/down Enable */
+#define GPPUDCLK0 0x98 /* Pin Pull-up/down Enable Clock */
+
+#define FSEL_REG(p) (GPFSEL0 + (((p) / 10) * 4))
+#define FSEL_SHIFT(p) (((p) % 10) * 3)
+#define GPIO_REG_OFFSET(p) ((p) / 32)
+#define GPIO_REG_SHIFT(p) ((p) % 32)
+
+enum bcm2835_pinconf_param {
+ /* argument: bcm2835_pinconf_pull */
+ BCM2835_PINCONF_PARAM_PULL,
+};
+
+enum bcm2835_pinconf_pull {
+ BCM2835_PINCONFIG_PULL_NONE,
+ BCM2835_PINCONFIG_PULL_DOWN,
+ BCM2835_PINCONFIG_PULL_UP,
+};
+
+#define BCM2835_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
+#define BCM2835_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
+#define BCM2835_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
+
+struct bcm2835_gpio_irqdata {
+ struct bcm2835_pinctrl *pc;
+ int bank;
+};
+
+struct bcm2835_pinctrl {
+ struct device *dev;
+ void __iomem *base;
+ int irq[BCM2835_NUM_BANKS];
+
+ /* note: locking assumes each bank will have its own unsigned long */
+ unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
+ unsigned int irq_type[BCM2835_NUM_GPIOS];
+
+ struct pinctrl_dev *pctl_dev;
+ struct irq_domain *irq_domain;
+ struct gpio_chip gpio_chip;
+ struct pinctrl_gpio_range gpio_range;
+
+ struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS];
+ spinlock_t irq_lock[BCM2835_NUM_BANKS];
+};
+
+static struct lock_class_key gpio_lock_class;
+
+/* pins are just named GPIO0..GPIO53 */
+#define BCM2835_GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a)
+static struct pinctrl_pin_desc bcm2835_gpio_pins[] = {
+ BCM2835_GPIO_PIN(0),
+ BCM2835_GPIO_PIN(1),
+ BCM2835_GPIO_PIN(2),
+ BCM2835_GPIO_PIN(3),
+ BCM2835_GPIO_PIN(4),
+ BCM2835_GPIO_PIN(5),
+ BCM2835_GPIO_PIN(6),
+ BCM2835_GPIO_PIN(7),
+ BCM2835_GPIO_PIN(8),
+ BCM2835_GPIO_PIN(9),
+ BCM2835_GPIO_PIN(10),
+ BCM2835_GPIO_PIN(11),
+ BCM2835_GPIO_PIN(12),
+ BCM2835_GPIO_PIN(13),
+ BCM2835_GPIO_PIN(14),
+ BCM2835_GPIO_PIN(15),
+ BCM2835_GPIO_PIN(16),
+ BCM2835_GPIO_PIN(17),
+ BCM2835_GPIO_PIN(18),
+ BCM2835_GPIO_PIN(19),
+ BCM2835_GPIO_PIN(20),
+ BCM2835_GPIO_PIN(21),
+ BCM2835_GPIO_PIN(22),
+ BCM2835_GPIO_PIN(23),
+ BCM2835_GPIO_PIN(24),
+ BCM2835_GPIO_PIN(25),
+ BCM2835_GPIO_PIN(26),
+ BCM2835_GPIO_PIN(27),
+ BCM2835_GPIO_PIN(28),
+ BCM2835_GPIO_PIN(29),
+ BCM2835_GPIO_PIN(30),
+ BCM2835_GPIO_PIN(31),
+ BCM2835_GPIO_PIN(32),
+ BCM2835_GPIO_PIN(33),
+ BCM2835_GPIO_PIN(34),
+ BCM2835_GPIO_PIN(35),
+ BCM2835_GPIO_PIN(36),
+ BCM2835_GPIO_PIN(37),
+ BCM2835_GPIO_PIN(38),
+ BCM2835_GPIO_PIN(39),
+ BCM2835_GPIO_PIN(40),
+ BCM2835_GPIO_PIN(41),
+ BCM2835_GPIO_PIN(42),
+ BCM2835_GPIO_PIN(43),
+ BCM2835_GPIO_PIN(44),
+ BCM2835_GPIO_PIN(45),
+ BCM2835_GPIO_PIN(46),
+ BCM2835_GPIO_PIN(47),
+ BCM2835_GPIO_PIN(48),
+ BCM2835_GPIO_PIN(49),
+ BCM2835_GPIO_PIN(50),
+ BCM2835_GPIO_PIN(51),
+ BCM2835_GPIO_PIN(52),
+ BCM2835_GPIO_PIN(53),
+};
+
+/* one pin per group */
+static const char * const bcm2835_gpio_groups[] = {
+ "gpio0",
+ "gpio1",
+ "gpio2",
+ "gpio3",
+ "gpio4",
+ "gpio5",
+ "gpio6",
+ "gpio7",
+ "gpio8",
+ "gpio9",
+ "gpio10",
+ "gpio11",
+ "gpio12",
+ "gpio13",
+ "gpio14",
+ "gpio15",
+ "gpio16",
+ "gpio17",
+ "gpio18",
+ "gpio19",
+ "gpio20",
+ "gpio21",
+ "gpio22",
+ "gpio23",
+ "gpio24",
+ "gpio25",
+ "gpio26",
+ "gpio27",
+ "gpio28",
+ "gpio29",
+ "gpio30",
+ "gpio31",
+ "gpio32",
+ "gpio33",
+ "gpio34",
+ "gpio35",
+ "gpio36",
+ "gpio37",
+ "gpio38",
+ "gpio39",
+ "gpio40",
+ "gpio41",
+ "gpio42",
+ "gpio43",
+ "gpio44",
+ "gpio45",
+ "gpio46",
+ "gpio47",
+ "gpio48",
+ "gpio49",
+ "gpio50",
+ "gpio51",
+ "gpio52",
+ "gpio53",
+};
+
+enum bcm2835_fsel {
+ BCM2835_FSEL_GPIO_IN = 0,
+ BCM2835_FSEL_GPIO_OUT = 1,
+ BCM2835_FSEL_ALT0 = 4,
+ BCM2835_FSEL_ALT1 = 5,
+ BCM2835_FSEL_ALT2 = 6,
+ BCM2835_FSEL_ALT3 = 7,
+ BCM2835_FSEL_ALT4 = 3,
+ BCM2835_FSEL_ALT5 = 2,
+ BCM2835_FSEL_COUNT = 8,
+ BCM2835_FSEL_MASK = 0x7,
+};
+
+static const char * const bcm2835_functions[BCM2835_FSEL_COUNT] = {
+ [BCM2835_FSEL_GPIO_IN] = "gpio_in",
+ [BCM2835_FSEL_GPIO_OUT] = "gpio_out",
+ [BCM2835_FSEL_ALT0] = "alt0",
+ [BCM2835_FSEL_ALT1] = "alt1",
+ [BCM2835_FSEL_ALT2] = "alt2",
+ [BCM2835_FSEL_ALT3] = "alt3",
+ [BCM2835_FSEL_ALT4] = "alt4",
+ [BCM2835_FSEL_ALT5] = "alt5",
+};
+
+static const char * const irq_type_names[] = {
+ [IRQ_TYPE_NONE] = "none",
+ [IRQ_TYPE_EDGE_RISING] = "edge-rising",
+ [IRQ_TYPE_EDGE_FALLING] = "edge-falling",
+ [IRQ_TYPE_EDGE_BOTH] = "edge-both",
+ [IRQ_TYPE_LEVEL_HIGH] = "level-high",
+ [IRQ_TYPE_LEVEL_LOW] = "level-low",
+};
+
+static inline u32 bcm2835_gpio_rd(struct bcm2835_pinctrl *pc, unsigned reg)
+{
+ return readl(pc->base + reg);
+}
+
+static inline void bcm2835_gpio_wr(struct bcm2835_pinctrl *pc, unsigned reg,
+ u32 val)
+{
+ writel(val, pc->base + reg);
+}
+
+static inline int bcm2835_gpio_get_bit(struct bcm2835_pinctrl *pc, unsigned reg,
+ unsigned bit)
+{
+ reg += GPIO_REG_OFFSET(bit) * 4;
+ return (bcm2835_gpio_rd(pc, reg) >> GPIO_REG_SHIFT(bit)) & 1;
+}
+
+/* note NOT a read/modify/write cycle */
+static inline void bcm2835_gpio_set_bit(struct bcm2835_pinctrl *pc,
+ unsigned reg, unsigned bit)
+{
+ reg += GPIO_REG_OFFSET(bit) * 4;
+ bcm2835_gpio_wr(pc, reg, BIT(GPIO_REG_SHIFT(bit)));
+}
+
+static inline enum bcm2835_fsel bcm2835_pinctrl_fsel_get(
+ struct bcm2835_pinctrl *pc, unsigned pin)
+{
+ u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
+ enum bcm2835_fsel status = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
+
+ dev_dbg(pc->dev, "get %08x (%u => %s)\n", val, pin,
+ bcm2835_functions[status]);
+
+ return status;
+}
+
+static inline void bcm2835_pinctrl_fsel_set(
+ struct bcm2835_pinctrl *pc, unsigned pin,
+ enum bcm2835_fsel fsel)
+{
+ u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
+ enum bcm2835_fsel cur = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
+
+ dev_dbg(pc->dev, "read %08x (%u => %s)\n", val, pin,
+ bcm2835_functions[cur]);
+
+ if (cur == fsel)
+ return;
+
+ if (cur != BCM2835_FSEL_GPIO_IN && fsel != BCM2835_FSEL_GPIO_IN) {
+ /* always transition through GPIO_IN */
+ val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
+ val |= BCM2835_FSEL_GPIO_IN << FSEL_SHIFT(pin);
+
+ dev_dbg(pc->dev, "trans %08x (%u <= %s)\n", val, pin,
+ bcm2835_functions[BCM2835_FSEL_GPIO_IN]);
+ bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
+ }
+
+ val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
+ val |= fsel << FSEL_SHIFT(pin);
+
+ dev_dbg(pc->dev, "write %08x (%u <= %s)\n", val, pin,
+ bcm2835_functions[fsel]);
+ bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
+}
+
+static int bcm2835_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_request_gpio(chip->base + offset);
+}
+
+static void bcm2835_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ pinctrl_free_gpio(chip->base + offset);
+}
+
+static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_gpio_direction_input(chip->base + offset);
+}
+
+static int bcm2835_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
+
+ return bcm2835_gpio_get_bit(pc, GPLEV0, offset);
+}
+
+static int bcm2835_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ return pinctrl_gpio_direction_output(chip->base + offset);
+}
+
+static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
+
+ bcm2835_gpio_set_bit(pc, value ? GPSET0 : GPCLR0, offset);
+}
+
+static int bcm2835_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
+
+ return irq_linear_revmap(pc->irq_domain, offset);
+}
+
+static struct gpio_chip bcm2835_gpio_chip = {
+ .label = MODULE_NAME,
+ .owner = THIS_MODULE,
+ .request = bcm2835_gpio_request,
+ .free = bcm2835_gpio_free,
+ .direction_input = bcm2835_gpio_direction_input,
+ .direction_output = bcm2835_gpio_direction_output,
+ .get = bcm2835_gpio_get,
+ .set = bcm2835_gpio_set,
+ .to_irq = bcm2835_gpio_to_irq,
+ .base = -1,
+ .ngpio = BCM2835_NUM_GPIOS,
+ .can_sleep = false,
+};
+
+static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id)
+{
+ struct bcm2835_gpio_irqdata *irqdata = dev_id;
+ struct bcm2835_pinctrl *pc = irqdata->pc;
+ int bank = irqdata->bank;
+ unsigned long events;
+ unsigned offset;
+ unsigned gpio;
+ unsigned int type;
+
+ events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4);
+ events &= pc->enabled_irq_map[bank];
+ for_each_set_bit(offset, &events, 32) {
+ gpio = (32 * bank) + offset;
+ type = pc->irq_type[gpio];
+
+ /* ack edge triggered IRQs immediately */
+ if (!(type & IRQ_TYPE_LEVEL_MASK))
+ bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
+
+ generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio));
+
+ /* ack level triggered IRQ after handling them */
+ if (type & IRQ_TYPE_LEVEL_MASK)
+ bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
+ }
+ return events ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
+ unsigned reg, unsigned offset, bool enable)
+{
+ u32 value;
+ reg += GPIO_REG_OFFSET(offset) * 4;
+ value = bcm2835_gpio_rd(pc, reg);
+ if (enable)
+ value |= BIT(GPIO_REG_SHIFT(offset));
+ else
+ value &= ~(BIT(GPIO_REG_SHIFT(offset)));
+ bcm2835_gpio_wr(pc, reg, value);
+}
+
+/* fast path for IRQ handler */
+static void bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
+ unsigned offset, bool enable)
+{
+ switch (pc->irq_type[offset]) {
+ case IRQ_TYPE_EDGE_RISING:
+ __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
+ __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ __bcm2835_gpio_irq_config(pc, GPHEN0, offset, enable);
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ __bcm2835_gpio_irq_config(pc, GPLEN0, offset, enable);
+ break;
+ }
+}
+
+static void bcm2835_gpio_irq_enable(struct irq_data *data)
+{
+ struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
+ unsigned gpio = irqd_to_hwirq(data);
+ unsigned offset = GPIO_REG_SHIFT(gpio);
+ unsigned bank = GPIO_REG_OFFSET(gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&pc->irq_lock[bank], flags);
+ set_bit(offset, &pc->enabled_irq_map[bank]);
+ bcm2835_gpio_irq_config(pc, gpio, true);
+ spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+}
+
+static void bcm2835_gpio_irq_disable(struct irq_data *data)
+{
+ struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
+ unsigned gpio = irqd_to_hwirq(data);
+ unsigned offset = GPIO_REG_SHIFT(gpio);
+ unsigned bank = GPIO_REG_OFFSET(gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&pc->irq_lock[bank], flags);
+ bcm2835_gpio_irq_config(pc, gpio, false);
+ clear_bit(offset, &pc->enabled_irq_map[bank]);
+ spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+}
+
+static int __bcm2835_gpio_irq_set_type_disabled(struct bcm2835_pinctrl *pc,
+ unsigned offset, unsigned int type)
+{
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_EDGE_FALLING:
+ case IRQ_TYPE_EDGE_BOTH:
+ case IRQ_TYPE_LEVEL_HIGH:
+ case IRQ_TYPE_LEVEL_LOW:
+ pc->irq_type[offset] = type;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* slower path for reconfiguring IRQ type */
+static int __bcm2835_gpio_irq_set_type_enabled(struct bcm2835_pinctrl *pc,
+ unsigned offset, unsigned int type)
+{
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ if (pc->irq_type[offset] != type) {
+ bcm2835_gpio_irq_config(pc, offset, false);
+ pc->irq_type[offset] = type;
+ }
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
+ /* RISING already enabled, disable FALLING */
+ pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
+ bcm2835_gpio_irq_config(pc, offset, false);
+ pc->irq_type[offset] = type;
+ } else if (pc->irq_type[offset] != type) {
+ bcm2835_gpio_irq_config(pc, offset, false);
+ pc->irq_type[offset] = type;
+ bcm2835_gpio_irq_config(pc, offset, true);
+ }
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
+ /* FALLING already enabled, disable RISING */
+ pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
+ bcm2835_gpio_irq_config(pc, offset, false);
+ pc->irq_type[offset] = type;
+ } else if (pc->irq_type[offset] != type) {
+ bcm2835_gpio_irq_config(pc, offset, false);
+ pc->irq_type[offset] = type;
+ bcm2835_gpio_irq_config(pc, offset, true);
+ }
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ if (pc->irq_type[offset] == IRQ_TYPE_EDGE_RISING) {
+ /* RISING already enabled, enable FALLING too */
+ pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
+ bcm2835_gpio_irq_config(pc, offset, true);
+ pc->irq_type[offset] = type;
+ } else if (pc->irq_type[offset] == IRQ_TYPE_EDGE_FALLING) {
+ /* FALLING already enabled, enable RISING too */
+ pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
+ bcm2835_gpio_irq_config(pc, offset, true);
+ pc->irq_type[offset] = type;
+ } else if (pc->irq_type[offset] != type) {
+ bcm2835_gpio_irq_config(pc, offset, false);
+ pc->irq_type[offset] = type;
+ bcm2835_gpio_irq_config(pc, offset, true);
+ }
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ case IRQ_TYPE_LEVEL_LOW:
+ if (pc->irq_type[offset] != type) {
+ bcm2835_gpio_irq_config(pc, offset, false);
+ pc->irq_type[offset] = type;
+ bcm2835_gpio_irq_config(pc, offset, true);
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
+{
+ struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
+ unsigned gpio = irqd_to_hwirq(data);
+ unsigned offset = GPIO_REG_SHIFT(gpio);
+ unsigned bank = GPIO_REG_OFFSET(gpio);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&pc->irq_lock[bank], flags);
+
+ if (test_bit(offset, &pc->enabled_irq_map[bank]))
+ ret = __bcm2835_gpio_irq_set_type_enabled(pc, gpio, type);
+ else
+ ret = __bcm2835_gpio_irq_set_type_disabled(pc, gpio, type);
+
+ spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+
+ return ret;
+}
+
+static struct irq_chip bcm2835_gpio_irq_chip = {
+ .name = MODULE_NAME,
+ .irq_enable = bcm2835_gpio_irq_enable,
+ .irq_disable = bcm2835_gpio_irq_disable,
+ .irq_set_type = bcm2835_gpio_irq_set_type,
+};
+
+static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(bcm2835_gpio_groups);
+}
+
+static const char *bcm2835_pctl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm2835_gpio_groups[selector];
+}
+
+static int bcm2835_pctl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ *pins = &bcm2835_gpio_pins[selector].number;
+ *num_pins = 1;
+
+ return 0;
+}
+
+static void bcm2835_pctl_pin_dbg_show(struct pinctrl_dev *pctldev,
+ struct seq_file *s,
+ unsigned offset)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset);
+ const char *fname = bcm2835_functions[fsel];
+ int value = bcm2835_gpio_get_bit(pc, GPLEV0, offset);
+ int irq = irq_find_mapping(pc->irq_domain, offset);
+
+ seq_printf(s, "function %s in %s; irq %d (%s)",
+ fname, value ? "hi" : "lo",
+ irq, irq_type_names[pc->irq_type[offset]]);
+}
+
+static void bcm2835_pctl_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *maps, unsigned num_maps)
+{
+ int i;
+
+ for (i = 0; i < num_maps; i++)
+ if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
+ kfree(maps[i].data.configs.configs);
+
+ kfree(maps);
+}
+
+static int bcm2835_pctl_dt_node_to_map_func(struct bcm2835_pinctrl *pc,
+ struct device_node *np, u32 pin, u32 fnum,
+ struct pinctrl_map **maps)
+{
+ struct pinctrl_map *map = *maps;
+
+ if (fnum >= ARRAY_SIZE(bcm2835_functions)) {
+ dev_err(pc->dev, "%s: invalid brcm,function %d\n",
+ of_node_full_name(np), fnum);
+ return -EINVAL;
+ }
+
+ map->type = PIN_MAP_TYPE_MUX_GROUP;
+ map->data.mux.group = bcm2835_gpio_groups[pin];
+ map->data.mux.function = bcm2835_functions[fnum];
+ (*maps)++;
+
+ return 0;
+}
+
+static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc,
+ struct device_node *np, u32 pin, u32 pull,
+ struct pinctrl_map **maps)
+{
+ struct pinctrl_map *map = *maps;
+ unsigned long *configs;
+
+ if (pull > 2) {
+ dev_err(pc->dev, "%s: invalid brcm,pull %d\n",
+ of_node_full_name(np), pull);
+ return -EINVAL;
+ }
+
+ configs = kzalloc(sizeof(*configs), GFP_KERNEL);
+ if (!configs)
+ return -ENOMEM;
+ configs[0] = BCM2835_PINCONF_PACK(BCM2835_PINCONF_PARAM_PULL, pull);
+
+ map->type = PIN_MAP_TYPE_CONFIGS_PIN;
+ map->data.configs.group_or_pin = bcm2835_gpio_pins[pin].name;
+ map->data.configs.configs = configs;
+ map->data.configs.num_configs = 1;
+ (*maps)++;
+
+ return 0;
+}
+
+static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np,
+ struct pinctrl_map **map, unsigned *num_maps)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ struct property *pins, *funcs, *pulls;
+ int num_pins, num_funcs, num_pulls, maps_per_pin;
+ struct pinctrl_map *maps, *cur_map;
+ int i, err;
+ u32 pin, func, pull;
+
+ pins = of_find_property(np, "brcm,pins", NULL);
+ if (!pins) {
+ dev_err(pc->dev, "%s: missing brcm,pins property\n",
+ of_node_full_name(np));
+ return -EINVAL;
+ }
+
+ funcs = of_find_property(np, "brcm,function", NULL);
+ pulls = of_find_property(np, "brcm,pull", NULL);
+
+ if (!funcs && !pulls) {
+ dev_err(pc->dev,
+ "%s: neither brcm,function nor brcm,pull specified\n",
+ of_node_full_name(np));
+ return -EINVAL;
+ }
+
+ num_pins = pins->length / 4;
+ num_funcs = funcs ? (funcs->length / 4) : 0;
+ num_pulls = pulls ? (pulls->length / 4) : 0;
+
+ if (num_funcs > 1 && num_funcs != num_pins) {
+ dev_err(pc->dev,
+ "%s: brcm,function must have 1 or %d entries\n",
+ of_node_full_name(np), num_pins);
+ return -EINVAL;
+ }
+
+ if (num_pulls > 1 && num_pulls != num_pins) {
+ dev_err(pc->dev,
+ "%s: brcm,pull must have 1 or %d entries\n",
+ of_node_full_name(np), num_pins);
+ return -EINVAL;
+ }
+
+ maps_per_pin = 0;
+ if (num_funcs)
+ maps_per_pin++;
+ if (num_pulls)
+ maps_per_pin++;
+ cur_map = maps = kzalloc(num_pins * maps_per_pin * sizeof(*maps),
+ GFP_KERNEL);
+ if (!maps)
+ return -ENOMEM;
+
+ for (i = 0; i < num_pins; i++) {
+ err = of_property_read_u32_index(np, "brcm,pins", i, &pin);
+ if (err)
+ goto out;
+ if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) {
+ dev_err(pc->dev, "%s: invalid brcm,pins value %d\n",
+ of_node_full_name(np), pin);
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (num_funcs) {
+ err = of_property_read_u32_index(np, "brcm,function",
+ (num_funcs > 1) ? i : 0, &func);
+ if (err)
+ goto out;
+ err = bcm2835_pctl_dt_node_to_map_func(pc, np, pin,
+ func, &cur_map);
+ if (err)
+ goto out;
+ }
+ if (num_pulls) {
+ err = of_property_read_u32_index(np, "brcm,pull",
+ (num_funcs > 1) ? i : 0, &pull);
+ if (err)
+ goto out;
+ err = bcm2835_pctl_dt_node_to_map_pull(pc, np, pin,
+ pull, &cur_map);
+ if (err)
+ goto out;
+ }
+ }
+
+ *map = maps;
+ *num_maps = num_pins * maps_per_pin;
+
+ return 0;
+
+out:
+ kfree(maps);
+ return err;
+}
+
+static const struct pinctrl_ops bcm2835_pctl_ops = {
+ .get_groups_count = bcm2835_pctl_get_groups_count,
+ .get_group_name = bcm2835_pctl_get_group_name,
+ .get_group_pins = bcm2835_pctl_get_group_pins,
+ .pin_dbg_show = bcm2835_pctl_pin_dbg_show,
+ .dt_node_to_map = bcm2835_pctl_dt_node_to_map,
+ .dt_free_map = bcm2835_pctl_dt_free_map,
+};
+
+static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev)
+{
+ return BCM2835_FSEL_COUNT;
+}
+
+static const char *bcm2835_pmx_get_function_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return bcm2835_functions[selector];
+}
+
+static int bcm2835_pmx_get_function_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ /* every pin can do every function */
+ *groups = bcm2835_gpio_groups;
+ *num_groups = ARRAY_SIZE(bcm2835_gpio_groups);
+
+ return 0;
+}
+
+static int bcm2835_pmx_set(struct pinctrl_dev *pctldev,
+ unsigned func_selector,
+ unsigned group_selector)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+ bcm2835_pinctrl_fsel_set(pc, group_selector, func_selector);
+
+ return 0;
+}
+
+static void bcm2835_pmx_gpio_disable_free(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable by setting to GPIO_IN */
+ bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN);
+}
+
+static int bcm2835_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset,
+ bool input)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ enum bcm2835_fsel fsel = input ?
+ BCM2835_FSEL_GPIO_IN : BCM2835_FSEL_GPIO_OUT;
+
+ bcm2835_pinctrl_fsel_set(pc, offset, fsel);
+
+ return 0;
+}
+
+static const struct pinmux_ops bcm2835_pmx_ops = {
+ .get_functions_count = bcm2835_pmx_get_functions_count,
+ .get_function_name = bcm2835_pmx_get_function_name,
+ .get_function_groups = bcm2835_pmx_get_function_groups,
+ .set_mux = bcm2835_pmx_set,
+ .gpio_disable_free = bcm2835_pmx_gpio_disable_free,
+ .gpio_set_direction = bcm2835_pmx_gpio_set_direction,
+};
+
+static int bcm2835_pinconf_get(struct pinctrl_dev *pctldev,
+ unsigned pin, unsigned long *config)
+{
+ /* No way to read back config in HW */
+ return -ENOTSUPP;
+}
+
+static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
+ unsigned pin, unsigned long *configs,
+ unsigned num_configs)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ enum bcm2835_pinconf_param param;
+ u16 arg;
+ u32 off, bit;
+ int i;
+
+ for (i = 0; i < num_configs; i++) {
+ param = BCM2835_PINCONF_UNPACK_PARAM(configs[i]);
+ arg = BCM2835_PINCONF_UNPACK_ARG(configs[i]);
+
+ if (param != BCM2835_PINCONF_PARAM_PULL)
+ return -EINVAL;
+
+ off = GPIO_REG_OFFSET(pin);
+ bit = GPIO_REG_SHIFT(pin);
+
+ bcm2835_gpio_wr(pc, GPPUD, arg & 3);
+ /*
+ * Docs say to wait 150 cycles, but not of what. We assume a
+ * 1 MHz clock here, which is pretty slow...
+ */
+ udelay(150);
+ bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit));
+ udelay(150);
+ bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0);
+ } /* for each config */
+
+ return 0;
+}
+
+static const struct pinconf_ops bcm2835_pinconf_ops = {
+ .pin_config_get = bcm2835_pinconf_get,
+ .pin_config_set = bcm2835_pinconf_set,
+};
+
+static struct pinctrl_desc bcm2835_pinctrl_desc = {
+ .name = MODULE_NAME,
+ .pins = bcm2835_gpio_pins,
+ .npins = ARRAY_SIZE(bcm2835_gpio_pins),
+ .pctlops = &bcm2835_pctl_ops,
+ .pmxops = &bcm2835_pmx_ops,
+ .confops = &bcm2835_pinconf_ops,
+ .owner = THIS_MODULE,
+};
+
+static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
+ .name = MODULE_NAME,
+ .npins = BCM2835_NUM_GPIOS,
+};
+
+static int bcm2835_pinctrl_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct bcm2835_pinctrl *pc;
+ struct resource iomem;
+ int err, i;
+ BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS);
+ BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS);
+
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, pc);
+ pc->dev = dev;
+
+ err = of_address_to_resource(np, 0, &iomem);
+ if (err) {
+ dev_err(dev, "could not get IO memory\n");
+ return err;
+ }
+
+ pc->base = devm_ioremap_resource(dev, &iomem);
+ if (IS_ERR(pc->base))
+ return PTR_ERR(pc->base);
+
+ pc->gpio_chip = bcm2835_gpio_chip;
+ pc->gpio_chip.dev = dev;
+ pc->gpio_chip.of_node = np;
+
+ pc->irq_domain = irq_domain_add_linear(np, BCM2835_NUM_GPIOS,
+ &irq_domain_simple_ops, NULL);
+ if (!pc->irq_domain) {
+ dev_err(dev, "could not create IRQ domain\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < BCM2835_NUM_GPIOS; i++) {
+ int irq = irq_create_mapping(pc->irq_domain, i);
+ irq_set_lockdep_class(irq, &gpio_lock_class);
+ irq_set_chip_and_handler(irq, &bcm2835_gpio_irq_chip,
+ handle_simple_irq);
+ irq_set_chip_data(irq, pc);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ for (i = 0; i < BCM2835_NUM_BANKS; i++) {
+ unsigned long events;
+ unsigned offset;
+ int len;
+ char *name;
+
+ /* clear event detection flags */
+ bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0);
+ bcm2835_gpio_wr(pc, GPFEN0 + i * 4, 0);
+ bcm2835_gpio_wr(pc, GPHEN0 + i * 4, 0);
+ bcm2835_gpio_wr(pc, GPLEN0 + i * 4, 0);
+ bcm2835_gpio_wr(pc, GPAREN0 + i * 4, 0);
+ bcm2835_gpio_wr(pc, GPAFEN0 + i * 4, 0);
+
+ /* clear all the events */
+ events = bcm2835_gpio_rd(pc, GPEDS0 + i * 4);
+ for_each_set_bit(offset, &events, 32)
+ bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset));
+
+ pc->irq[i] = irq_of_parse_and_map(np, i);
+ pc->irq_data[i].pc = pc;
+ pc->irq_data[i].bank = i;
+ spin_lock_init(&pc->irq_lock[i]);
+
+ len = strlen(dev_name(pc->dev)) + 16;
+ name = devm_kzalloc(pc->dev, len, GFP_KERNEL);
+ if (!name)
+ return -ENOMEM;
+ snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i);
+
+ err = devm_request_irq(dev, pc->irq[i],
+ bcm2835_gpio_irq_handler, IRQF_SHARED,
+ name, &pc->irq_data[i]);
+ if (err) {
+ dev_err(dev, "unable to request IRQ %d\n", pc->irq[i]);
+ return err;
+ }
+ }
+
+ err = gpiochip_add(&pc->gpio_chip);
+ if (err) {
+ dev_err(dev, "could not add GPIO chip\n");
+ return err;
+ }
+
+ pc->pctl_dev = pinctrl_register(&bcm2835_pinctrl_desc, dev, pc);
+ if (!pc->pctl_dev) {
+ gpiochip_remove(&pc->gpio_chip);
+ return -EINVAL;
+ }
+
+ pc->gpio_range = bcm2835_pinctrl_gpio_range;
+ pc->gpio_range.base = pc->gpio_chip.base;
+ pc->gpio_range.gc = &pc->gpio_chip;
+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
+
+ return 0;
+}
+
+static int bcm2835_pinctrl_remove(struct platform_device *pdev)
+{
+ struct bcm2835_pinctrl *pc = platform_get_drvdata(pdev);
+
+ pinctrl_unregister(pc->pctl_dev);
+ gpiochip_remove(&pc->gpio_chip);
+
+ return 0;
+}
+
+static struct of_device_id bcm2835_pinctrl_match[] = {
+ { .compatible = "brcm,bcm2835-gpio" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, bcm2835_pinctrl_match);
+
+static struct platform_driver bcm2835_pinctrl_driver = {
+ .probe = bcm2835_pinctrl_probe,
+ .remove = bcm2835_pinctrl_remove,
+ .driver = {
+ .name = MODULE_NAME,
+ .of_match_table = bcm2835_pinctrl_match,
+ },
+};
+module_platform_driver(bcm2835_pinctrl_driver);
+
+MODULE_AUTHOR("Chris Boot, Simon Arlott, Stephen Warren");
+MODULE_DESCRIPTION("BCM2835 Pin control driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pinctrl/pinctrl-bcm281xx.c b/drivers/pinctrl/pinctrl-bcm281xx.c
deleted file mode 100644
index fa2a00f..0000000
--- a/drivers/pinctrl/pinctrl-bcm281xx.c
+++ /dev/null
@@ -1,1455 +0,0 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-#include "core.h"
-#include "pinctrl-utils.h"
-
-/* BCM281XX Pin Control Registers Definitions */
-
-/* Function Select bits are the same for all pin control registers */
-#define BCM281XX_PIN_REG_F_SEL_MASK 0x0700
-#define BCM281XX_PIN_REG_F_SEL_SHIFT 8
-
-/* Standard pin register */
-#define BCM281XX_STD_PIN_REG_DRV_STR_MASK 0x0007
-#define BCM281XX_STD_PIN_REG_DRV_STR_SHIFT 0
-#define BCM281XX_STD_PIN_REG_INPUT_DIS_MASK 0x0008
-#define BCM281XX_STD_PIN_REG_INPUT_DIS_SHIFT 3
-#define BCM281XX_STD_PIN_REG_SLEW_MASK 0x0010
-#define BCM281XX_STD_PIN_REG_SLEW_SHIFT 4
-#define BCM281XX_STD_PIN_REG_PULL_UP_MASK 0x0020
-#define BCM281XX_STD_PIN_REG_PULL_UP_SHIFT 5
-#define BCM281XX_STD_PIN_REG_PULL_DN_MASK 0x0040
-#define BCM281XX_STD_PIN_REG_PULL_DN_SHIFT 6
-#define BCM281XX_STD_PIN_REG_HYST_MASK 0x0080
-#define BCM281XX_STD_PIN_REG_HYST_SHIFT 7
-
-/* I2C pin register */
-#define BCM281XX_I2C_PIN_REG_INPUT_DIS_MASK 0x0004
-#define BCM281XX_I2C_PIN_REG_INPUT_DIS_SHIFT 2
-#define BCM281XX_I2C_PIN_REG_SLEW_MASK 0x0008
-#define BCM281XX_I2C_PIN_REG_SLEW_SHIFT 3
-#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_MASK 0x0070
-#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_SHIFT 4
-
-/* HDMI pin register */
-#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_MASK 0x0008
-#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_SHIFT 3
-#define BCM281XX_HDMI_PIN_REG_MODE_MASK 0x0010
-#define BCM281XX_HDMI_PIN_REG_MODE_SHIFT 4
-
-/**
- * bcm281xx_pin_type - types of pin register
- */
-enum bcm281xx_pin_type {
- BCM281XX_PIN_TYPE_UNKNOWN = 0,
- BCM281XX_PIN_TYPE_STD,
- BCM281XX_PIN_TYPE_I2C,
- BCM281XX_PIN_TYPE_HDMI,
-};
-
-static enum bcm281xx_pin_type std_pin = BCM281XX_PIN_TYPE_STD;
-static enum bcm281xx_pin_type i2c_pin = BCM281XX_PIN_TYPE_I2C;
-static enum bcm281xx_pin_type hdmi_pin = BCM281XX_PIN_TYPE_HDMI;
-
-/**
- * bcm281xx_pin_function- define pin function
- */
-struct bcm281xx_pin_function {
- const char *name;
- const char * const *groups;
- const unsigned ngroups;
-};
-
-/**
- * bcm281xx_pinctrl_data - Broadcom-specific pinctrl data
- * @reg_base - base of pinctrl registers
- */
-struct bcm281xx_pinctrl_data {
- void __iomem *reg_base;
-
- /* List of all pins */
- const struct pinctrl_pin_desc *pins;
- const unsigned npins;
-
- const struct bcm281xx_pin_function *functions;
- const unsigned nfunctions;
-
- struct regmap *regmap;
-};
-
-/*
- * Pin number definition. The order here must be the same as defined in the
- * PADCTRLREG block in the RDB.
- */
-#define BCM281XX_PIN_ADCSYNC 0
-#define BCM281XX_PIN_BAT_RM 1
-#define BCM281XX_PIN_BSC1_SCL 2
-#define BCM281XX_PIN_BSC1_SDA 3
-#define BCM281XX_PIN_BSC2_SCL 4
-#define BCM281XX_PIN_BSC2_SDA 5
-#define BCM281XX_PIN_CLASSGPWR 6
-#define BCM281XX_PIN_CLK_CX8 7
-#define BCM281XX_PIN_CLKOUT_0 8
-#define BCM281XX_PIN_CLKOUT_1 9
-#define BCM281XX_PIN_CLKOUT_2 10
-#define BCM281XX_PIN_CLKOUT_3 11
-#define BCM281XX_PIN_CLKREQ_IN_0 12
-#define BCM281XX_PIN_CLKREQ_IN_1 13
-#define BCM281XX_PIN_CWS_SYS_REQ1 14
-#define BCM281XX_PIN_CWS_SYS_REQ2 15
-#define BCM281XX_PIN_CWS_SYS_REQ3 16
-#define BCM281XX_PIN_DIGMIC1_CLK 17
-#define BCM281XX_PIN_DIGMIC1_DQ 18
-#define BCM281XX_PIN_DIGMIC2_CLK 19
-#define BCM281XX_PIN_DIGMIC2_DQ 20
-#define BCM281XX_PIN_GPEN13 21
-#define BCM281XX_PIN_GPEN14 22
-#define BCM281XX_PIN_GPEN15 23
-#define BCM281XX_PIN_GPIO00 24
-#define BCM281XX_PIN_GPIO01 25
-#define BCM281XX_PIN_GPIO02 26
-#define BCM281XX_PIN_GPIO03 27
-#define BCM281XX_PIN_GPIO04 28
-#define BCM281XX_PIN_GPIO05 29
-#define BCM281XX_PIN_GPIO06 30
-#define BCM281XX_PIN_GPIO07 31
-#define BCM281XX_PIN_GPIO08 32
-#define BCM281XX_PIN_GPIO09 33
-#define BCM281XX_PIN_GPIO10 34
-#define BCM281XX_PIN_GPIO11 35
-#define BCM281XX_PIN_GPIO12 36
-#define BCM281XX_PIN_GPIO13 37
-#define BCM281XX_PIN_GPIO14 38
-#define BCM281XX_PIN_GPS_PABLANK 39
-#define BCM281XX_PIN_GPS_TMARK 40
-#define BCM281XX_PIN_HDMI_SCL 41
-#define BCM281XX_PIN_HDMI_SDA 42
-#define BCM281XX_PIN_IC_DM 43
-#define BCM281XX_PIN_IC_DP 44
-#define BCM281XX_PIN_KP_COL_IP_0 45
-#define BCM281XX_PIN_KP_COL_IP_1 46
-#define BCM281XX_PIN_KP_COL_IP_2 47
-#define BCM281XX_PIN_KP_COL_IP_3 48
-#define BCM281XX_PIN_KP_ROW_OP_0 49
-#define BCM281XX_PIN_KP_ROW_OP_1 50
-#define BCM281XX_PIN_KP_ROW_OP_2 51
-#define BCM281XX_PIN_KP_ROW_OP_3 52
-#define BCM281XX_PIN_LCD_B_0 53
-#define BCM281XX_PIN_LCD_B_1 54
-#define BCM281XX_PIN_LCD_B_2 55
-#define BCM281XX_PIN_LCD_B_3 56
-#define BCM281XX_PIN_LCD_B_4 57
-#define BCM281XX_PIN_LCD_B_5 58
-#define BCM281XX_PIN_LCD_B_6 59
-#define BCM281XX_PIN_LCD_B_7 60
-#define BCM281XX_PIN_LCD_G_0 61
-#define BCM281XX_PIN_LCD_G_1 62
-#define BCM281XX_PIN_LCD_G_2 63
-#define BCM281XX_PIN_LCD_G_3 64
-#define BCM281XX_PIN_LCD_G_4 65
-#define BCM281XX_PIN_LCD_G_5 66
-#define BCM281XX_PIN_LCD_G_6 67
-#define BCM281XX_PIN_LCD_G_7 68
-#define BCM281XX_PIN_LCD_HSYNC 69
-#define BCM281XX_PIN_LCD_OE 70
-#define BCM281XX_PIN_LCD_PCLK 71
-#define BCM281XX_PIN_LCD_R_0 72
-#define BCM281XX_PIN_LCD_R_1 73
-#define BCM281XX_PIN_LCD_R_2 74
-#define BCM281XX_PIN_LCD_R_3 75
-#define BCM281XX_PIN_LCD_R_4 76
-#define BCM281XX_PIN_LCD_R_5 77
-#define BCM281XX_PIN_LCD_R_6 78
-#define BCM281XX_PIN_LCD_R_7 79
-#define BCM281XX_PIN_LCD_VSYNC 80
-#define BCM281XX_PIN_MDMGPIO0 81
-#define BCM281XX_PIN_MDMGPIO1 82
-#define BCM281XX_PIN_MDMGPIO2 83
-#define BCM281XX_PIN_MDMGPIO3 84
-#define BCM281XX_PIN_MDMGPIO4 85
-#define BCM281XX_PIN_MDMGPIO5 86
-#define BCM281XX_PIN_MDMGPIO6 87
-#define BCM281XX_PIN_MDMGPIO7 88
-#define BCM281XX_PIN_MDMGPIO8 89
-#define BCM281XX_PIN_MPHI_DATA_0 90
-#define BCM281XX_PIN_MPHI_DATA_1 91
-#define BCM281XX_PIN_MPHI_DATA_2 92
-#define BCM281XX_PIN_MPHI_DATA_3 93
-#define BCM281XX_PIN_MPHI_DATA_4 94
-#define BCM281XX_PIN_MPHI_DATA_5 95
-#define BCM281XX_PIN_MPHI_DATA_6 96
-#define BCM281XX_PIN_MPHI_DATA_7 97
-#define BCM281XX_PIN_MPHI_DATA_8 98
-#define BCM281XX_PIN_MPHI_DATA_9 99
-#define BCM281XX_PIN_MPHI_DATA_10 100
-#define BCM281XX_PIN_MPHI_DATA_11 101
-#define BCM281XX_PIN_MPHI_DATA_12 102
-#define BCM281XX_PIN_MPHI_DATA_13 103
-#define BCM281XX_PIN_MPHI_DATA_14 104
-#define BCM281XX_PIN_MPHI_DATA_15 105
-#define BCM281XX_PIN_MPHI_HA0 106
-#define BCM281XX_PIN_MPHI_HAT0 107
-#define BCM281XX_PIN_MPHI_HAT1 108
-#define BCM281XX_PIN_MPHI_HCE0_N 109
-#define BCM281XX_PIN_MPHI_HCE1_N 110
-#define BCM281XX_PIN_MPHI_HRD_N 111
-#define BCM281XX_PIN_MPHI_HWR_N 112
-#define BCM281XX_PIN_MPHI_RUN0 113
-#define BCM281XX_PIN_MPHI_RUN1 114
-#define BCM281XX_PIN_MTX_SCAN_CLK 115
-#define BCM281XX_PIN_MTX_SCAN_DATA 116
-#define BCM281XX_PIN_NAND_AD_0 117
-#define BCM281XX_PIN_NAND_AD_1 118
-#define BCM281XX_PIN_NAND_AD_2 119
-#define BCM281XX_PIN_NAND_AD_3 120
-#define BCM281XX_PIN_NAND_AD_4 121
-#define BCM281XX_PIN_NAND_AD_5 122
-#define BCM281XX_PIN_NAND_AD_6 123
-#define BCM281XX_PIN_NAND_AD_7 124
-#define BCM281XX_PIN_NAND_ALE 125
-#define BCM281XX_PIN_NAND_CEN_0 126
-#define BCM281XX_PIN_NAND_CEN_1 127
-#define BCM281XX_PIN_NAND_CLE 128
-#define BCM281XX_PIN_NAND_OEN 129
-#define BCM281XX_PIN_NAND_RDY_0 130
-#define BCM281XX_PIN_NAND_RDY_1 131
-#define BCM281XX_PIN_NAND_WEN 132
-#define BCM281XX_PIN_NAND_WP 133
-#define BCM281XX_PIN_PC1 134
-#define BCM281XX_PIN_PC2 135
-#define BCM281XX_PIN_PMU_INT 136
-#define BCM281XX_PIN_PMU_SCL 137
-#define BCM281XX_PIN_PMU_SDA 138
-#define BCM281XX_PIN_RFST2G_MTSLOTEN3G 139
-#define BCM281XX_PIN_RGMII_0_RX_CTL 140
-#define BCM281XX_PIN_RGMII_0_RXC 141
-#define BCM281XX_PIN_RGMII_0_RXD_0 142
-#define BCM281XX_PIN_RGMII_0_RXD_1 143
-#define BCM281XX_PIN_RGMII_0_RXD_2 144
-#define BCM281XX_PIN_RGMII_0_RXD_3 145
-#define BCM281XX_PIN_RGMII_0_TX_CTL 146
-#define BCM281XX_PIN_RGMII_0_TXC 147
-#define BCM281XX_PIN_RGMII_0_TXD_0 148
-#define BCM281XX_PIN_RGMII_0_TXD_1 149
-#define BCM281XX_PIN_RGMII_0_TXD_2 150
-#define BCM281XX_PIN_RGMII_0_TXD_3 151
-#define BCM281XX_PIN_RGMII_1_RX_CTL 152
-#define BCM281XX_PIN_RGMII_1_RXC 153
-#define BCM281XX_PIN_RGMII_1_RXD_0 154
-#define BCM281XX_PIN_RGMII_1_RXD_1 155
-#define BCM281XX_PIN_RGMII_1_RXD_2 156
-#define BCM281XX_PIN_RGMII_1_RXD_3 157
-#define BCM281XX_PIN_RGMII_1_TX_CTL 158
-#define BCM281XX_PIN_RGMII_1_TXC 159
-#define BCM281XX_PIN_RGMII_1_TXD_0 160
-#define BCM281XX_PIN_RGMII_1_TXD_1 161
-#define BCM281XX_PIN_RGMII_1_TXD_2 162
-#define BCM281XX_PIN_RGMII_1_TXD_3 163
-#define BCM281XX_PIN_RGMII_GPIO_0 164
-#define BCM281XX_PIN_RGMII_GPIO_1 165
-#define BCM281XX_PIN_RGMII_GPIO_2 166
-#define BCM281XX_PIN_RGMII_GPIO_3 167
-#define BCM281XX_PIN_RTXDATA2G_TXDATA3G1 168
-#define BCM281XX_PIN_RTXEN2G_TXDATA3G2 169
-#define BCM281XX_PIN_RXDATA3G0 170
-#define BCM281XX_PIN_RXDATA3G1 171
-#define BCM281XX_PIN_RXDATA3G2 172
-#define BCM281XX_PIN_SDIO1_CLK 173
-#define BCM281XX_PIN_SDIO1_CMD 174
-#define BCM281XX_PIN_SDIO1_DATA_0 175
-#define BCM281XX_PIN_SDIO1_DATA_1 176
-#define BCM281XX_PIN_SDIO1_DATA_2 177
-#define BCM281XX_PIN_SDIO1_DATA_3 178
-#define BCM281XX_PIN_SDIO4_CLK 179
-#define BCM281XX_PIN_SDIO4_CMD 180
-#define BCM281XX_PIN_SDIO4_DATA_0 181
-#define BCM281XX_PIN_SDIO4_DATA_1 182
-#define BCM281XX_PIN_SDIO4_DATA_2 183
-#define BCM281XX_PIN_SDIO4_DATA_3 184
-#define BCM281XX_PIN_SIM_CLK 185
-#define BCM281XX_PIN_SIM_DATA 186
-#define BCM281XX_PIN_SIM_DET 187
-#define BCM281XX_PIN_SIM_RESETN 188
-#define BCM281XX_PIN_SIM2_CLK 189
-#define BCM281XX_PIN_SIM2_DATA 190
-#define BCM281XX_PIN_SIM2_DET 191
-#define BCM281XX_PIN_SIM2_RESETN 192
-#define BCM281XX_PIN_SRI_C 193
-#define BCM281XX_PIN_SRI_D 194
-#define BCM281XX_PIN_SRI_E 195
-#define BCM281XX_PIN_SSP_EXTCLK 196
-#define BCM281XX_PIN_SSP0_CLK 197
-#define BCM281XX_PIN_SSP0_FS 198
-#define BCM281XX_PIN_SSP0_RXD 199
-#define BCM281XX_PIN_SSP0_TXD 200
-#define BCM281XX_PIN_SSP2_CLK 201
-#define BCM281XX_PIN_SSP2_FS_0 202
-#define BCM281XX_PIN_SSP2_FS_1 203
-#define BCM281XX_PIN_SSP2_FS_2 204
-#define BCM281XX_PIN_SSP2_FS_3 205
-#define BCM281XX_PIN_SSP2_RXD_0 206
-#define BCM281XX_PIN_SSP2_RXD_1 207
-#define BCM281XX_PIN_SSP2_TXD_0 208
-#define BCM281XX_PIN_SSP2_TXD_1 209
-#define BCM281XX_PIN_SSP3_CLK 210
-#define BCM281XX_PIN_SSP3_FS 211
-#define BCM281XX_PIN_SSP3_RXD 212
-#define BCM281XX_PIN_SSP3_TXD 213
-#define BCM281XX_PIN_SSP4_CLK 214
-#define BCM281XX_PIN_SSP4_FS 215
-#define BCM281XX_PIN_SSP4_RXD 216
-#define BCM281XX_PIN_SSP4_TXD 217
-#define BCM281XX_PIN_SSP5_CLK 218
-#define BCM281XX_PIN_SSP5_FS 219
-#define BCM281XX_PIN_SSP5_RXD 220
-#define BCM281XX_PIN_SSP5_TXD 221
-#define BCM281XX_PIN_SSP6_CLK 222
-#define BCM281XX_PIN_SSP6_FS 223
-#define BCM281XX_PIN_SSP6_RXD 224
-#define BCM281XX_PIN_SSP6_TXD 225
-#define BCM281XX_PIN_STAT_1 226
-#define BCM281XX_PIN_STAT_2 227
-#define BCM281XX_PIN_SYSCLKEN 228
-#define BCM281XX_PIN_TRACECLK 229
-#define BCM281XX_PIN_TRACEDT00 230
-#define BCM281XX_PIN_TRACEDT01 231
-#define BCM281XX_PIN_TRACEDT02 232
-#define BCM281XX_PIN_TRACEDT03 233
-#define BCM281XX_PIN_TRACEDT04 234
-#define BCM281XX_PIN_TRACEDT05 235
-#define BCM281XX_PIN_TRACEDT06 236
-#define BCM281XX_PIN_TRACEDT07 237
-#define BCM281XX_PIN_TRACEDT08 238
-#define BCM281XX_PIN_TRACEDT09 239
-#define BCM281XX_PIN_TRACEDT10 240
-#define BCM281XX_PIN_TRACEDT11 241
-#define BCM281XX_PIN_TRACEDT12 242
-#define BCM281XX_PIN_TRACEDT13 243
-#define BCM281XX_PIN_TRACEDT14 244
-#define BCM281XX_PIN_TRACEDT15 245
-#define BCM281XX_PIN_TXDATA3G0 246
-#define BCM281XX_PIN_TXPWRIND 247
-#define BCM281XX_PIN_UARTB1_UCTS 248
-#define BCM281XX_PIN_UARTB1_URTS 249
-#define BCM281XX_PIN_UARTB1_URXD 250
-#define BCM281XX_PIN_UARTB1_UTXD 251
-#define BCM281XX_PIN_UARTB2_URXD 252
-#define BCM281XX_PIN_UARTB2_UTXD 253
-#define BCM281XX_PIN_UARTB3_UCTS 254
-#define BCM281XX_PIN_UARTB3_URTS 255
-#define BCM281XX_PIN_UARTB3_URXD 256
-#define BCM281XX_PIN_UARTB3_UTXD 257
-#define BCM281XX_PIN_UARTB4_UCTS 258
-#define BCM281XX_PIN_UARTB4_URTS 259
-#define BCM281XX_PIN_UARTB4_URXD 260
-#define BCM281XX_PIN_UARTB4_UTXD 261
-#define BCM281XX_PIN_VC_CAM1_SCL 262
-#define BCM281XX_PIN_VC_CAM1_SDA 263
-#define BCM281XX_PIN_VC_CAM2_SCL 264
-#define BCM281XX_PIN_VC_CAM2_SDA 265
-#define BCM281XX_PIN_VC_CAM3_SCL 266
-#define BCM281XX_PIN_VC_CAM3_SDA 267
-
-#define BCM281XX_PIN_DESC(a, b, c) \
- { .number = a, .name = b, .drv_data = &c##_pin }
-
-/*
- * Pin description definition. The order here must be the same as defined in
- * the PADCTRLREG block in the RDB, since the pin number is used as an index
- * into this array.
- */
-static const struct pinctrl_pin_desc bcm281xx_pinctrl_pins[] = {
- BCM281XX_PIN_DESC(BCM281XX_PIN_ADCSYNC, "adcsync", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_BAT_RM, "bat_rm", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SCL, "bsc1_scl", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SDA, "bsc1_sda", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SCL, "bsc2_scl", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SDA, "bsc2_sda", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLASSGPWR, "classgpwr", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLK_CX8, "clk_cx8", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_0, "clkout_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_1, "clkout_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_2, "clkout_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_3, "clkout_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_0, "clkreq_in_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_1, "clkreq_in_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ1, "cws_sys_req1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ2, "cws_sys_req2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ3, "cws_sys_req3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_CLK, "digmic1_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_DQ, "digmic1_dq", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_CLK, "digmic2_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_DQ, "digmic2_dq", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN13, "gpen13", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN14, "gpen14", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN15, "gpen15", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO00, "gpio00", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO01, "gpio01", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO02, "gpio02", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO03, "gpio03", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO04, "gpio04", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO05, "gpio05", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO06, "gpio06", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO07, "gpio07", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO08, "gpio08", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO09, "gpio09", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO10, "gpio10", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO11, "gpio11", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO12, "gpio12", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO13, "gpio13", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO14, "gpio14", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_PABLANK, "gps_pablank", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_TMARK, "gps_tmark", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SCL, "hdmi_scl", hdmi),
- BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SDA, "hdmi_sda", hdmi),
- BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DM, "ic_dm", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DP, "ic_dp", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_0, "kp_col_ip_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_1, "kp_col_ip_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_2, "kp_col_ip_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_3, "kp_col_ip_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_0, "kp_row_op_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_1, "kp_row_op_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_2, "kp_row_op_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_3, "kp_row_op_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_0, "lcd_b_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_1, "lcd_b_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_2, "lcd_b_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_3, "lcd_b_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_4, "lcd_b_4", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_5, "lcd_b_5", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_6, "lcd_b_6", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_7, "lcd_b_7", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_0, "lcd_g_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_1, "lcd_g_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_2, "lcd_g_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_3, "lcd_g_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_4, "lcd_g_4", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_5, "lcd_g_5", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_6, "lcd_g_6", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_7, "lcd_g_7", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_HSYNC, "lcd_hsync", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_OE, "lcd_oe", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_PCLK, "lcd_pclk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_0, "lcd_r_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_1, "lcd_r_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_2, "lcd_r_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_3, "lcd_r_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_4, "lcd_r_4", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_5, "lcd_r_5", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_6, "lcd_r_6", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_7, "lcd_r_7", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_VSYNC, "lcd_vsync", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO0, "mdmgpio0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO1, "mdmgpio1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO2, "mdmgpio2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO3, "mdmgpio3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO4, "mdmgpio4", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO5, "mdmgpio5", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO6, "mdmgpio6", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO7, "mdmgpio7", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO8, "mdmgpio8", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_0, "mphi_data_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_1, "mphi_data_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_2, "mphi_data_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_3, "mphi_data_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_4, "mphi_data_4", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_5, "mphi_data_5", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_6, "mphi_data_6", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_7, "mphi_data_7", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_8, "mphi_data_8", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_9, "mphi_data_9", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_10, "mphi_data_10", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_11, "mphi_data_11", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_12, "mphi_data_12", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_13, "mphi_data_13", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_14, "mphi_data_14", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_15, "mphi_data_15", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HA0, "mphi_ha0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT0, "mphi_hat0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT1, "mphi_hat1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE0_N, "mphi_hce0_n", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE1_N, "mphi_hce1_n", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HRD_N, "mphi_hrd_n", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HWR_N, "mphi_hwr_n", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN0, "mphi_run0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN1, "mphi_run1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_CLK, "mtx_scan_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_DATA, "mtx_scan_data", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_0, "nand_ad_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_1, "nand_ad_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_2, "nand_ad_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_3, "nand_ad_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_4, "nand_ad_4", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_5, "nand_ad_5", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_6, "nand_ad_6", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_7, "nand_ad_7", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_ALE, "nand_ale", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_0, "nand_cen_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_1, "nand_cen_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CLE, "nand_cle", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_OEN, "nand_oen", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_0, "nand_rdy_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_1, "nand_rdy_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WEN, "nand_wen", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WP, "nand_wp", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_PC1, "pc1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_PC2, "pc2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_INT, "pmu_int", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SCL, "pmu_scl", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SDA, "pmu_sda", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RFST2G_MTSLOTEN3G, "rfst2g_mtsloten3g",
- std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RX_CTL, "rgmii_0_rx_ctl", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXC, "rgmii_0_rxc", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_0, "rgmii_0_rxd_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_1, "rgmii_0_rxd_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_2, "rgmii_0_rxd_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_3, "rgmii_0_rxd_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TX_CTL, "rgmii_0_tx_ctl", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXC, "rgmii_0_txc", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_0, "rgmii_0_txd_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_1, "rgmii_0_txd_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_2, "rgmii_0_txd_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_3, "rgmii_0_txd_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RX_CTL, "rgmii_1_rx_ctl", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXC, "rgmii_1_rxc", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_0, "rgmii_1_rxd_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_1, "rgmii_1_rxd_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_2, "rgmii_1_rxd_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_3, "rgmii_1_rxd_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TX_CTL, "rgmii_1_tx_ctl", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXC, "rgmii_1_txc", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_0, "rgmii_1_txd_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_1, "rgmii_1_txd_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_2, "rgmii_1_txd_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_3, "rgmii_1_txd_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_0, "rgmii_gpio_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_1, "rgmii_gpio_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_2, "rgmii_gpio_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_3, "rgmii_gpio_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RTXDATA2G_TXDATA3G1,
- "rtxdata2g_txdata3g1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RTXEN2G_TXDATA3G2, "rtxen2g_txdata3g2",
- std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G0, "rxdata3g0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G1, "rxdata3g1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G2, "rxdata3g2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CLK, "sdio1_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CMD, "sdio1_cmd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_0, "sdio1_data_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_1, "sdio1_data_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_2, "sdio1_data_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_3, "sdio1_data_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CLK, "sdio4_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CMD, "sdio4_cmd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_0, "sdio4_data_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_1, "sdio4_data_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_2, "sdio4_data_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_3, "sdio4_data_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_CLK, "sim_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DATA, "sim_data", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DET, "sim_det", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_RESETN, "sim_resetn", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_CLK, "sim2_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DATA, "sim2_data", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DET, "sim2_det", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_RESETN, "sim2_resetn", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_C, "sri_c", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_D, "sri_d", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_E, "sri_e", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP_EXTCLK, "ssp_extclk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_CLK, "ssp0_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_FS, "ssp0_fs", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_RXD, "ssp0_rxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_TXD, "ssp0_txd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_CLK, "ssp2_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_0, "ssp2_fs_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_1, "ssp2_fs_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_2, "ssp2_fs_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_3, "ssp2_fs_3", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_0, "ssp2_rxd_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_1, "ssp2_rxd_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_0, "ssp2_txd_0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_1, "ssp2_txd_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_CLK, "ssp3_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_FS, "ssp3_fs", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_RXD, "ssp3_rxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_TXD, "ssp3_txd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_CLK, "ssp4_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_FS, "ssp4_fs", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_RXD, "ssp4_rxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_TXD, "ssp4_txd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_CLK, "ssp5_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_FS, "ssp5_fs", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_RXD, "ssp5_rxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_TXD, "ssp5_txd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_CLK, "ssp6_clk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_FS, "ssp6_fs", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_RXD, "ssp6_rxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_TXD, "ssp6_txd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_1, "stat_1", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_2, "stat_2", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_SYSCLKEN, "sysclken", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACECLK, "traceclk", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT00, "tracedt00", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT01, "tracedt01", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT02, "tracedt02", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT03, "tracedt03", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT04, "tracedt04", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT05, "tracedt05", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT06, "tracedt06", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT07, "tracedt07", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT08, "tracedt08", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT09, "tracedt09", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT10, "tracedt10", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT11, "tracedt11", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT12, "tracedt12", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT13, "tracedt13", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT14, "tracedt14", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT15, "tracedt15", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TXDATA3G0, "txdata3g0", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_TXPWRIND, "txpwrind", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UCTS, "uartb1_ucts", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URTS, "uartb1_urts", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URXD, "uartb1_urxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UTXD, "uartb1_utxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_URXD, "uartb2_urxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_UTXD, "uartb2_utxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UCTS, "uartb3_ucts", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URTS, "uartb3_urts", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URXD, "uartb3_urxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UTXD, "uartb3_utxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UCTS, "uartb4_ucts", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URTS, "uartb4_urts", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URXD, "uartb4_urxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UTXD, "uartb4_utxd", std),
- BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SCL, "vc_cam1_scl", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SDA, "vc_cam1_sda", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SCL, "vc_cam2_scl", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SDA, "vc_cam2_sda", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SCL, "vc_cam3_scl", i2c),
- BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SDA, "vc_cam3_sda", i2c),
-};
-
-static const char * const bcm281xx_alt_groups[] = {
- "adcsync",
- "bat_rm",
- "bsc1_scl",
- "bsc1_sda",
- "bsc2_scl",
- "bsc2_sda",
- "classgpwr",
- "clk_cx8",
- "clkout_0",
- "clkout_1",
- "clkout_2",
- "clkout_3",
- "clkreq_in_0",
- "clkreq_in_1",
- "cws_sys_req1",
- "cws_sys_req2",
- "cws_sys_req3",
- "digmic1_clk",
- "digmic1_dq",
- "digmic2_clk",
- "digmic2_dq",
- "gpen13",
- "gpen14",
- "gpen15",
- "gpio00",
- "gpio01",
- "gpio02",
- "gpio03",
- "gpio04",
- "gpio05",
- "gpio06",
- "gpio07",
- "gpio08",
- "gpio09",
- "gpio10",
- "gpio11",
- "gpio12",
- "gpio13",
- "gpio14",
- "gps_pablank",
- "gps_tmark",
- "hdmi_scl",
- "hdmi_sda",
- "ic_dm",
- "ic_dp",
- "kp_col_ip_0",
- "kp_col_ip_1",
- "kp_col_ip_2",
- "kp_col_ip_3",
- "kp_row_op_0",
- "kp_row_op_1",
- "kp_row_op_2",
- "kp_row_op_3",
- "lcd_b_0",
- "lcd_b_1",
- "lcd_b_2",
- "lcd_b_3",
- "lcd_b_4",
- "lcd_b_5",
- "lcd_b_6",
- "lcd_b_7",
- "lcd_g_0",
- "lcd_g_1",
- "lcd_g_2",
- "lcd_g_3",
- "lcd_g_4",
- "lcd_g_5",
- "lcd_g_6",
- "lcd_g_7",
- "lcd_hsync",
- "lcd_oe",
- "lcd_pclk",
- "lcd_r_0",
- "lcd_r_1",
- "lcd_r_2",
- "lcd_r_3",
- "lcd_r_4",
- "lcd_r_5",
- "lcd_r_6",
- "lcd_r_7",
- "lcd_vsync",
- "mdmgpio0",
- "mdmgpio1",
- "mdmgpio2",
- "mdmgpio3",
- "mdmgpio4",
- "mdmgpio5",
- "mdmgpio6",
- "mdmgpio7",
- "mdmgpio8",
- "mphi_data_0",
- "mphi_data_1",
- "mphi_data_2",
- "mphi_data_3",
- "mphi_data_4",
- "mphi_data_5",
- "mphi_data_6",
- "mphi_data_7",
- "mphi_data_8",
- "mphi_data_9",
- "mphi_data_10",
- "mphi_data_11",
- "mphi_data_12",
- "mphi_data_13",
- "mphi_data_14",
- "mphi_data_15",
- "mphi_ha0",
- "mphi_hat0",
- "mphi_hat1",
- "mphi_hce0_n",
- "mphi_hce1_n",
- "mphi_hrd_n",
- "mphi_hwr_n",
- "mphi_run0",
- "mphi_run1",
- "mtx_scan_clk",
- "mtx_scan_data",
- "nand_ad_0",
- "nand_ad_1",
- "nand_ad_2",
- "nand_ad_3",
- "nand_ad_4",
- "nand_ad_5",
- "nand_ad_6",
- "nand_ad_7",
- "nand_ale",
- "nand_cen_0",
- "nand_cen_1",
- "nand_cle",
- "nand_oen",
- "nand_rdy_0",
- "nand_rdy_1",
- "nand_wen",
- "nand_wp",
- "pc1",
- "pc2",
- "pmu_int",
- "pmu_scl",
- "pmu_sda",
- "rfst2g_mtsloten3g",
- "rgmii_0_rx_ctl",
- "rgmii_0_rxc",
- "rgmii_0_rxd_0",
- "rgmii_0_rxd_1",
- "rgmii_0_rxd_2",
- "rgmii_0_rxd_3",
- "rgmii_0_tx_ctl",
- "rgmii_0_txc",
- "rgmii_0_txd_0",
- "rgmii_0_txd_1",
- "rgmii_0_txd_2",
- "rgmii_0_txd_3",
- "rgmii_1_rx_ctl",
- "rgmii_1_rxc",
- "rgmii_1_rxd_0",
- "rgmii_1_rxd_1",
- "rgmii_1_rxd_2",
- "rgmii_1_rxd_3",
- "rgmii_1_tx_ctl",
- "rgmii_1_txc",
- "rgmii_1_txd_0",
- "rgmii_1_txd_1",
- "rgmii_1_txd_2",
- "rgmii_1_txd_3",
- "rgmii_gpio_0",
- "rgmii_gpio_1",
- "rgmii_gpio_2",
- "rgmii_gpio_3",
- "rtxdata2g_txdata3g1",
- "rtxen2g_txdata3g2",
- "rxdata3g0",
- "rxdata3g1",
- "rxdata3g2",
- "sdio1_clk",
- "sdio1_cmd",
- "sdio1_data_0",
- "sdio1_data_1",
- "sdio1_data_2",
- "sdio1_data_3",
- "sdio4_clk",
- "sdio4_cmd",
- "sdio4_data_0",
- "sdio4_data_1",
- "sdio4_data_2",
- "sdio4_data_3",
- "sim_clk",
- "sim_data",
- "sim_det",
- "sim_resetn",
- "sim2_clk",
- "sim2_data",
- "sim2_det",
- "sim2_resetn",
- "sri_c",
- "sri_d",
- "sri_e",
- "ssp_extclk",
- "ssp0_clk",
- "ssp0_fs",
- "ssp0_rxd",
- "ssp0_txd",
- "ssp2_clk",
- "ssp2_fs_0",
- "ssp2_fs_1",
- "ssp2_fs_2",
- "ssp2_fs_3",
- "ssp2_rxd_0",
- "ssp2_rxd_1",
- "ssp2_txd_0",
- "ssp2_txd_1",
- "ssp3_clk",
- "ssp3_fs",
- "ssp3_rxd",
- "ssp3_txd",
- "ssp4_clk",
- "ssp4_fs",
- "ssp4_rxd",
- "ssp4_txd",
- "ssp5_clk",
- "ssp5_fs",
- "ssp5_rxd",
- "ssp5_txd",
- "ssp6_clk",
- "ssp6_fs",
- "ssp6_rxd",
- "ssp6_txd",
- "stat_1",
- "stat_2",
- "sysclken",
- "traceclk",
- "tracedt00",
- "tracedt01",
- "tracedt02",
- "tracedt03",
- "tracedt04",
- "tracedt05",
- "tracedt06",
- "tracedt07",
- "tracedt08",
- "tracedt09",
- "tracedt10",
- "tracedt11",
- "tracedt12",
- "tracedt13",
- "tracedt14",
- "tracedt15",
- "txdata3g0",
- "txpwrind",
- "uartb1_ucts",
- "uartb1_urts",
- "uartb1_urxd",
- "uartb1_utxd",
- "uartb2_urxd",
- "uartb2_utxd",
- "uartb3_ucts",
- "uartb3_urts",
- "uartb3_urxd",
- "uartb3_utxd",
- "uartb4_ucts",
- "uartb4_urts",
- "uartb4_urxd",
- "uartb4_utxd",
- "vc_cam1_scl",
- "vc_cam1_sda",
- "vc_cam2_scl",
- "vc_cam2_sda",
- "vc_cam3_scl",
- "vc_cam3_sda",
-};
-
-/* Every pin can implement all ALT1-ALT4 functions */
-#define BCM281XX_PIN_FUNCTION(fcn_name) \
-{ \
- .name = #fcn_name, \
- .groups = bcm281xx_alt_groups, \
- .ngroups = ARRAY_SIZE(bcm281xx_alt_groups), \
-}
-
-static const struct bcm281xx_pin_function bcm281xx_functions[] = {
- BCM281XX_PIN_FUNCTION(alt1),
- BCM281XX_PIN_FUNCTION(alt2),
- BCM281XX_PIN_FUNCTION(alt3),
- BCM281XX_PIN_FUNCTION(alt4),
-};
-
-static struct bcm281xx_pinctrl_data bcm281xx_pinctrl = {
- .pins = bcm281xx_pinctrl_pins,
- .npins = ARRAY_SIZE(bcm281xx_pinctrl_pins),
- .functions = bcm281xx_functions,
- .nfunctions = ARRAY_SIZE(bcm281xx_functions),
-};
-
-static inline enum bcm281xx_pin_type pin_type_get(struct pinctrl_dev *pctldev,
- unsigned pin)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
- if (pin >= pdata->npins)
- return BCM281XX_PIN_TYPE_UNKNOWN;
-
- return *(enum bcm281xx_pin_type *)(pdata->pins[pin].drv_data);
-}
-
-#define BCM281XX_PIN_SHIFT(type, param) \
- (BCM281XX_ ## type ## _PIN_REG_ ## param ## _SHIFT)
-
-#define BCM281XX_PIN_MASK(type, param) \
- (BCM281XX_ ## type ## _PIN_REG_ ## param ## _MASK)
-
-/*
- * This helper function is used to build up the value and mask used to write to
- * a pin register, but does not actually write to the register.
- */
-static inline void bcm281xx_pin_update(u32 *reg_val, u32 *reg_mask,
- u32 param_val, u32 param_shift,
- u32 param_mask)
-{
- *reg_val &= ~param_mask;
- *reg_val |= (param_val << param_shift) & param_mask;
- *reg_mask |= param_mask;
-}
-
-static struct regmap_config bcm281xx_pinctrl_regmap_config = {
- .reg_bits = 32,
- .reg_stride = 4,
- .val_bits = 32,
- .max_register = BCM281XX_PIN_VC_CAM3_SDA,
-};
-
-static int bcm281xx_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
- return pdata->npins;
-}
-
-static const char *bcm281xx_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
- unsigned group)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
- return pdata->pins[group].name;
-}
-
-static int bcm281xx_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
- unsigned group,
- const unsigned **pins,
- unsigned *num_pins)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
- *pins = &pdata->pins[group].number;
- *num_pins = 1;
-
- return 0;
-}
-
-static void bcm281xx_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
- struct seq_file *s,
- unsigned offset)
-{
- seq_printf(s, " %s", dev_name(pctldev->dev));
-}
-
-static struct pinctrl_ops bcm281xx_pinctrl_ops = {
- .get_groups_count = bcm281xx_pinctrl_get_groups_count,
- .get_group_name = bcm281xx_pinctrl_get_group_name,
- .get_group_pins = bcm281xx_pinctrl_get_group_pins,
- .pin_dbg_show = bcm281xx_pinctrl_pin_dbg_show,
- .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
- .dt_free_map = pinctrl_utils_dt_free_map,
-};
-
-static int bcm281xx_pinctrl_get_fcns_count(struct pinctrl_dev *pctldev)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
- return pdata->nfunctions;
-}
-
-static const char *bcm281xx_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev,
- unsigned function)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
- return pdata->functions[function].name;
-}
-
-static int bcm281xx_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev,
- unsigned function,
- const char * const **groups,
- unsigned * const num_groups)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
- *groups = pdata->functions[function].groups;
- *num_groups = pdata->functions[function].ngroups;
-
- return 0;
-}
-
-static int bcm281xx_pinmux_set(struct pinctrl_dev *pctldev,
- unsigned function,
- unsigned group)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
- const struct bcm281xx_pin_function *f = &pdata->functions[function];
- u32 offset = 4 * pdata->pins[group].number;
- int rc = 0;
-
- dev_dbg(pctldev->dev,
- "%s(): Enable function %s (%d) of pin %s (%d) @offset 0x%x.\n",
- __func__, f->name, function, pdata->pins[group].name,
- pdata->pins[group].number, offset);
-
- rc = regmap_update_bits(pdata->regmap, offset,
- BCM281XX_PIN_REG_F_SEL_MASK,
- function << BCM281XX_PIN_REG_F_SEL_SHIFT);
- if (rc)
- dev_err(pctldev->dev,
- "Error updating register for pin %s (%d).\n",
- pdata->pins[group].name, pdata->pins[group].number);
-
- return rc;
-}
-
-static struct pinmux_ops bcm281xx_pinctrl_pinmux_ops = {
- .get_functions_count = bcm281xx_pinctrl_get_fcns_count,
- .get_function_name = bcm281xx_pinctrl_get_fcn_name,
- .get_function_groups = bcm281xx_pinctrl_get_fcn_groups,
- .set_mux = bcm281xx_pinmux_set,
-};
-
-static int bcm281xx_pinctrl_pin_config_get(struct pinctrl_dev *pctldev,
- unsigned pin,
- unsigned long *config)
-{
- return -ENOTSUPP;
-}
-
-
-/* Goes through the configs and update register val/mask */
-static int bcm281xx_std_pin_update(struct pinctrl_dev *pctldev,
- unsigned pin,
- unsigned long *configs,
- unsigned num_configs,
- u32 *val,
- u32 *mask)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
- int i;
- enum pin_config_param param;
- u16 arg;
-
- for (i = 0; i < num_configs; i++) {
- param = pinconf_to_config_param(configs[i]);
- arg = pinconf_to_config_argument(configs[i]);
-
- switch (param) {
- case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
- arg = (arg >= 1 ? 1 : 0);
- bcm281xx_pin_update(val, mask, arg,
- BCM281XX_PIN_SHIFT(STD, HYST),
- BCM281XX_PIN_MASK(STD, HYST));
- break;
- /*
- * The pin bias can only be one of pull-up, pull-down, or
- * disable. The user does not need to specify a value for the
- * property, and the default value from pinconf-generic is
- * ignored.
- */
- case PIN_CONFIG_BIAS_DISABLE:
- bcm281xx_pin_update(val, mask, 0,
- BCM281XX_PIN_SHIFT(STD, PULL_UP),
- BCM281XX_PIN_MASK(STD, PULL_UP));
- bcm281xx_pin_update(val, mask, 0,
- BCM281XX_PIN_SHIFT(STD, PULL_DN),
- BCM281XX_PIN_MASK(STD, PULL_DN));
- break;
-
- case PIN_CONFIG_BIAS_PULL_UP:
- bcm281xx_pin_update(val, mask, 1,
- BCM281XX_PIN_SHIFT(STD, PULL_UP),
- BCM281XX_PIN_MASK(STD, PULL_UP));
- bcm281xx_pin_update(val, mask, 0,
- BCM281XX_PIN_SHIFT(STD, PULL_DN),
- BCM281XX_PIN_MASK(STD, PULL_DN));
- break;
-
- case PIN_CONFIG_BIAS_PULL_DOWN:
- bcm281xx_pin_update(val, mask, 0,
- BCM281XX_PIN_SHIFT(STD, PULL_UP),
- BCM281XX_PIN_MASK(STD, PULL_UP));
- bcm281xx_pin_update(val, mask, 1,
- BCM281XX_PIN_SHIFT(STD, PULL_DN),
- BCM281XX_PIN_MASK(STD, PULL_DN));
- break;
-
- case PIN_CONFIG_SLEW_RATE:
- arg = (arg >= 1 ? 1 : 0);
- bcm281xx_pin_update(val, mask, arg,
- BCM281XX_PIN_SHIFT(STD, SLEW),
- BCM281XX_PIN_MASK(STD, SLEW));
- break;
-
- case PIN_CONFIG_INPUT_ENABLE:
- /* inversed since register is for input _disable_ */
- arg = (arg >= 1 ? 0 : 1);
- bcm281xx_pin_update(val, mask, arg,
- BCM281XX_PIN_SHIFT(STD, INPUT_DIS),
- BCM281XX_PIN_MASK(STD, INPUT_DIS));
- break;
-
- case PIN_CONFIG_DRIVE_STRENGTH:
- /* Valid range is 2-16 mA, even numbers only */
- if ((arg < 2) || (arg > 16) || (arg % 2)) {
- dev_err(pctldev->dev,
- "Invalid Drive Strength value (%d) for "
- "pin %s (%d). Valid values are "
- "(2..16) mA, even numbers only.\n",
- arg, pdata->pins[pin].name, pin);
- return -EINVAL;
- }
- bcm281xx_pin_update(val, mask, (arg/2)-1,
- BCM281XX_PIN_SHIFT(STD, DRV_STR),
- BCM281XX_PIN_MASK(STD, DRV_STR));
- break;
-
- default:
- dev_err(pctldev->dev,
- "Unrecognized pin config %d for pin %s (%d).\n",
- param, pdata->pins[pin].name, pin);
- return -EINVAL;
-
- } /* switch config */
- } /* for each config */
-
- return 0;
-}
-
-/*
- * The pull-up strength for an I2C pin is represented by bits 4-6 in the
- * register with the following mapping:
- * 0b000: No pull-up
- * 0b001: 1200 Ohm
- * 0b010: 1800 Ohm
- * 0b011: 720 Ohm
- * 0b100: 2700 Ohm
- * 0b101: 831 Ohm
- * 0b110: 1080 Ohm
- * 0b111: 568 Ohm
- * This array maps pull-up strength in Ohms to register values (1+index).
- */
-static const u16 bcm281xx_pullup_map[] = {
- 1200, 1800, 720, 2700, 831, 1080, 568
-};
-
-/* Goes through the configs and update register val/mask */
-static int bcm281xx_i2c_pin_update(struct pinctrl_dev *pctldev,
- unsigned pin,
- unsigned long *configs,
- unsigned num_configs,
- u32 *val,
- u32 *mask)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
- int i, j;
- enum pin_config_param param;
- u16 arg;
-
- for (i = 0; i < num_configs; i++) {
- param = pinconf_to_config_param(configs[i]);
- arg = pinconf_to_config_argument(configs[i]);
-
- switch (param) {
- case PIN_CONFIG_BIAS_PULL_UP:
- for (j = 0; j < ARRAY_SIZE(bcm281xx_pullup_map); j++)
- if (bcm281xx_pullup_map[j] == arg)
- break;
-
- if (j == ARRAY_SIZE(bcm281xx_pullup_map)) {
- dev_err(pctldev->dev,
- "Invalid pull-up value (%d) for pin %s "
- "(%d). Valid values are 568, 720, 831, "
- "1080, 1200, 1800, 2700 Ohms.\n",
- arg, pdata->pins[pin].name, pin);
- return -EINVAL;
- }
-
- bcm281xx_pin_update(val, mask, j+1,
- BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR),
- BCM281XX_PIN_MASK(I2C, PULL_UP_STR));
- break;
-
- case PIN_CONFIG_BIAS_DISABLE:
- bcm281xx_pin_update(val, mask, 0,
- BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR),
- BCM281XX_PIN_MASK(I2C, PULL_UP_STR));
- break;
-
- case PIN_CONFIG_SLEW_RATE:
- arg = (arg >= 1 ? 1 : 0);
- bcm281xx_pin_update(val, mask, arg,
- BCM281XX_PIN_SHIFT(I2C, SLEW),
- BCM281XX_PIN_MASK(I2C, SLEW));
- break;
-
- case PIN_CONFIG_INPUT_ENABLE:
- /* inversed since register is for input _disable_ */
- arg = (arg >= 1 ? 0 : 1);
- bcm281xx_pin_update(val, mask, arg,
- BCM281XX_PIN_SHIFT(I2C, INPUT_DIS),
- BCM281XX_PIN_MASK(I2C, INPUT_DIS));
- break;
-
- default:
- dev_err(pctldev->dev,
- "Unrecognized pin config %d for pin %s (%d).\n",
- param, pdata->pins[pin].name, pin);
- return -EINVAL;
-
- } /* switch config */
- } /* for each config */
-
- return 0;
-}
-
-/* Goes through the configs and update register val/mask */
-static int bcm281xx_hdmi_pin_update(struct pinctrl_dev *pctldev,
- unsigned pin,
- unsigned long *configs,
- unsigned num_configs,
- u32 *val,
- u32 *mask)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
- int i;
- enum pin_config_param param;
- u16 arg;
-
- for (i = 0; i < num_configs; i++) {
- param = pinconf_to_config_param(configs[i]);
- arg = pinconf_to_config_argument(configs[i]);
-
- switch (param) {
- case PIN_CONFIG_SLEW_RATE:
- arg = (arg >= 1 ? 1 : 0);
- bcm281xx_pin_update(val, mask, arg,
- BCM281XX_PIN_SHIFT(HDMI, MODE),
- BCM281XX_PIN_MASK(HDMI, MODE));
- break;
-
- case PIN_CONFIG_INPUT_ENABLE:
- /* inversed since register is for input _disable_ */
- arg = (arg >= 1 ? 0 : 1);
- bcm281xx_pin_update(val, mask, arg,
- BCM281XX_PIN_SHIFT(HDMI, INPUT_DIS),
- BCM281XX_PIN_MASK(HDMI, INPUT_DIS));
- break;
-
- default:
- dev_err(pctldev->dev,
- "Unrecognized pin config %d for pin %s (%d).\n",
- param, pdata->pins[pin].name, pin);
- return -EINVAL;
-
- } /* switch config */
- } /* for each config */
-
- return 0;
-}
-
-static int bcm281xx_pinctrl_pin_config_set(struct pinctrl_dev *pctldev,
- unsigned pin,
- unsigned long *configs,
- unsigned num_configs)
-{
- struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
- enum bcm281xx_pin_type pin_type;
- u32 offset = 4 * pin;
- u32 cfg_val, cfg_mask;
- int rc;
-
- cfg_val = 0;
- cfg_mask = 0;
- pin_type = pin_type_get(pctldev, pin);
-
- /* Different pins have different configuration options */
- switch (pin_type) {
- case BCM281XX_PIN_TYPE_STD:
- rc = bcm281xx_std_pin_update(pctldev, pin, configs,
- num_configs, &cfg_val, &cfg_mask);
- break;
-
- case BCM281XX_PIN_TYPE_I2C:
- rc = bcm281xx_i2c_pin_update(pctldev, pin, configs,
- num_configs, &cfg_val, &cfg_mask);
- break;
-
- case BCM281XX_PIN_TYPE_HDMI:
- rc = bcm281xx_hdmi_pin_update(pctldev, pin, configs,
- num_configs, &cfg_val, &cfg_mask);
- break;
-
- default:
- dev_err(pctldev->dev, "Unknown pin type for pin %s (%d).\n",
- pdata->pins[pin].name, pin);
- return -EINVAL;
-
- } /* switch pin type */
-
- if (rc)
- return rc;
-
- dev_dbg(pctldev->dev,
- "%s(): Set pin %s (%d) with config 0x%x, mask 0x%x\n",
- __func__, pdata->pins[pin].name, pin, cfg_val, cfg_mask);
-
- rc = regmap_update_bits(pdata->regmap, offset, cfg_mask, cfg_val);
- if (rc) {
- dev_err(pctldev->dev,
- "Error updating register for pin %s (%d).\n",
- pdata->pins[pin].name, pin);
- return rc;
- }
-
- return 0;
-}
-
-static struct pinconf_ops bcm281xx_pinctrl_pinconf_ops = {
- .pin_config_get = bcm281xx_pinctrl_pin_config_get,
- .pin_config_set = bcm281xx_pinctrl_pin_config_set,
-};
-
-static struct pinctrl_desc bcm281xx_pinctrl_desc = {
- /* name, pins, npins members initialized in probe function */
- .pctlops = &bcm281xx_pinctrl_ops,
- .pmxops = &bcm281xx_pinctrl_pinmux_ops,
- .confops = &bcm281xx_pinctrl_pinconf_ops,
- .owner = THIS_MODULE,
-};
-
-static int __init bcm281xx_pinctrl_probe(struct platform_device *pdev)
-{
- struct bcm281xx_pinctrl_data *pdata = &bcm281xx_pinctrl;
- struct resource *res;
- struct pinctrl_dev *pctl;
-
- /* So far We can assume there is only 1 bank of registers */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pdata->reg_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(pdata->reg_base)) {
- dev_err(&pdev->dev, "Failed to ioremap MEM resource\n");
- return -ENODEV;
- }
-
- /* Initialize the dynamic part of pinctrl_desc */
- pdata->regmap = devm_regmap_init_mmio(&pdev->dev, pdata->reg_base,
- &bcm281xx_pinctrl_regmap_config);
- if (IS_ERR(pdata->regmap)) {
- dev_err(&pdev->dev, "Regmap MMIO init failed.\n");
- return -ENODEV;
- }
-
- bcm281xx_pinctrl_desc.name = dev_name(&pdev->dev);
- bcm281xx_pinctrl_desc.pins = bcm281xx_pinctrl.pins;
- bcm281xx_pinctrl_desc.npins = bcm281xx_pinctrl.npins;
-
- pctl = pinctrl_register(&bcm281xx_pinctrl_desc,
- &pdev->dev,
- pdata);
- if (!pctl) {
- dev_err(&pdev->dev, "Failed to register pinctrl\n");
- return -ENODEV;
- }
-
- platform_set_drvdata(pdev, pdata);
-
- return 0;
-}
-
-static struct of_device_id bcm281xx_pinctrl_of_match[] = {
- { .compatible = "brcm,bcm11351-pinctrl", },
- { },
-};
-
-static struct platform_driver bcm281xx_pinctrl_driver = {
- .driver = {
- .name = "bcm281xx-pinctrl",
- .of_match_table = bcm281xx_pinctrl_of_match,
- },
-};
-
-module_platform_driver_probe(bcm281xx_pinctrl_driver, bcm281xx_pinctrl_probe);
-
-MODULE_AUTHOR("Broadcom Corporation <[email protected]>");
-MODULE_AUTHOR("Sherman Yin <[email protected]>");
-MODULE_DESCRIPTION("Broadcom BCM281xx pinctrl driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c
deleted file mode 100644
index 9aa8a3f..0000000
--- a/drivers/pinctrl/pinctrl-bcm2835.c
+++ /dev/null
@@ -1,1072 +0,0 @@
-/*
- * Driver for Broadcom BCM2835 GPIO unit (pinctrl + GPIO)
- *
- * Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren
- *
- * This driver is inspired by:
- * pinctrl-nomadik.c, please see original file for copyright information
- * pinctrl-tegra.c, please see original file for copyright information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/bitmap.h>
-#include <linux/bug.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdesc.h>
-#include <linux/irqdomain.h>
-#include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/pinctrl/consumer.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/platform_device.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-#define MODULE_NAME "pinctrl-bcm2835"
-#define BCM2835_NUM_GPIOS 54
-#define BCM2835_NUM_BANKS 2
-
-#define BCM2835_PIN_BITMAP_SZ \
- DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8)
-
-/* GPIO register offsets */
-#define GPFSEL0 0x0 /* Function Select */
-#define GPSET0 0x1c /* Pin Output Set */
-#define GPCLR0 0x28 /* Pin Output Clear */
-#define GPLEV0 0x34 /* Pin Level */
-#define GPEDS0 0x40 /* Pin Event Detect Status */
-#define GPREN0 0x4c /* Pin Rising Edge Detect Enable */
-#define GPFEN0 0x58 /* Pin Falling Edge Detect Enable */
-#define GPHEN0 0x64 /* Pin High Detect Enable */
-#define GPLEN0 0x70 /* Pin Low Detect Enable */
-#define GPAREN0 0x7c /* Pin Async Rising Edge Detect */
-#define GPAFEN0 0x88 /* Pin Async Falling Edge Detect */
-#define GPPUD 0x94 /* Pin Pull-up/down Enable */
-#define GPPUDCLK0 0x98 /* Pin Pull-up/down Enable Clock */
-
-#define FSEL_REG(p) (GPFSEL0 + (((p) / 10) * 4))
-#define FSEL_SHIFT(p) (((p) % 10) * 3)
-#define GPIO_REG_OFFSET(p) ((p) / 32)
-#define GPIO_REG_SHIFT(p) ((p) % 32)
-
-enum bcm2835_pinconf_param {
- /* argument: bcm2835_pinconf_pull */
- BCM2835_PINCONF_PARAM_PULL,
-};
-
-enum bcm2835_pinconf_pull {
- BCM2835_PINCONFIG_PULL_NONE,
- BCM2835_PINCONFIG_PULL_DOWN,
- BCM2835_PINCONFIG_PULL_UP,
-};
-
-#define BCM2835_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
-#define BCM2835_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
-#define BCM2835_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
-
-struct bcm2835_gpio_irqdata {
- struct bcm2835_pinctrl *pc;
- int bank;
-};
-
-struct bcm2835_pinctrl {
- struct device *dev;
- void __iomem *base;
- int irq[BCM2835_NUM_BANKS];
-
- /* note: locking assumes each bank will have its own unsigned long */
- unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
- unsigned int irq_type[BCM2835_NUM_GPIOS];
-
- struct pinctrl_dev *pctl_dev;
- struct irq_domain *irq_domain;
- struct gpio_chip gpio_chip;
- struct pinctrl_gpio_range gpio_range;
-
- struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS];
- spinlock_t irq_lock[BCM2835_NUM_BANKS];
-};
-
-static struct lock_class_key gpio_lock_class;
-
-/* pins are just named GPIO0..GPIO53 */
-#define BCM2835_GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a)
-static struct pinctrl_pin_desc bcm2835_gpio_pins[] = {
- BCM2835_GPIO_PIN(0),
- BCM2835_GPIO_PIN(1),
- BCM2835_GPIO_PIN(2),
- BCM2835_GPIO_PIN(3),
- BCM2835_GPIO_PIN(4),
- BCM2835_GPIO_PIN(5),
- BCM2835_GPIO_PIN(6),
- BCM2835_GPIO_PIN(7),
- BCM2835_GPIO_PIN(8),
- BCM2835_GPIO_PIN(9),
- BCM2835_GPIO_PIN(10),
- BCM2835_GPIO_PIN(11),
- BCM2835_GPIO_PIN(12),
- BCM2835_GPIO_PIN(13),
- BCM2835_GPIO_PIN(14),
- BCM2835_GPIO_PIN(15),
- BCM2835_GPIO_PIN(16),
- BCM2835_GPIO_PIN(17),
- BCM2835_GPIO_PIN(18),
- BCM2835_GPIO_PIN(19),
- BCM2835_GPIO_PIN(20),
- BCM2835_GPIO_PIN(21),
- BCM2835_GPIO_PIN(22),
- BCM2835_GPIO_PIN(23),
- BCM2835_GPIO_PIN(24),
- BCM2835_GPIO_PIN(25),
- BCM2835_GPIO_PIN(26),
- BCM2835_GPIO_PIN(27),
- BCM2835_GPIO_PIN(28),
- BCM2835_GPIO_PIN(29),
- BCM2835_GPIO_PIN(30),
- BCM2835_GPIO_PIN(31),
- BCM2835_GPIO_PIN(32),
- BCM2835_GPIO_PIN(33),
- BCM2835_GPIO_PIN(34),
- BCM2835_GPIO_PIN(35),
- BCM2835_GPIO_PIN(36),
- BCM2835_GPIO_PIN(37),
- BCM2835_GPIO_PIN(38),
- BCM2835_GPIO_PIN(39),
- BCM2835_GPIO_PIN(40),
- BCM2835_GPIO_PIN(41),
- BCM2835_GPIO_PIN(42),
- BCM2835_GPIO_PIN(43),
- BCM2835_GPIO_PIN(44),
- BCM2835_GPIO_PIN(45),
- BCM2835_GPIO_PIN(46),
- BCM2835_GPIO_PIN(47),
- BCM2835_GPIO_PIN(48),
- BCM2835_GPIO_PIN(49),
- BCM2835_GPIO_PIN(50),
- BCM2835_GPIO_PIN(51),
- BCM2835_GPIO_PIN(52),
- BCM2835_GPIO_PIN(53),
-};
-
-/* one pin per group */
-static const char * const bcm2835_gpio_groups[] = {
- "gpio0",
- "gpio1",
- "gpio2",
- "gpio3",
- "gpio4",
- "gpio5",
- "gpio6",
- "gpio7",
- "gpio8",
- "gpio9",
- "gpio10",
- "gpio11",
- "gpio12",
- "gpio13",
- "gpio14",
- "gpio15",
- "gpio16",
- "gpio17",
- "gpio18",
- "gpio19",
- "gpio20",
- "gpio21",
- "gpio22",
- "gpio23",
- "gpio24",
- "gpio25",
- "gpio26",
- "gpio27",
- "gpio28",
- "gpio29",
- "gpio30",
- "gpio31",
- "gpio32",
- "gpio33",
- "gpio34",
- "gpio35",
- "gpio36",
- "gpio37",
- "gpio38",
- "gpio39",
- "gpio40",
- "gpio41",
- "gpio42",
- "gpio43",
- "gpio44",
- "gpio45",
- "gpio46",
- "gpio47",
- "gpio48",
- "gpio49",
- "gpio50",
- "gpio51",
- "gpio52",
- "gpio53",
-};
-
-enum bcm2835_fsel {
- BCM2835_FSEL_GPIO_IN = 0,
- BCM2835_FSEL_GPIO_OUT = 1,
- BCM2835_FSEL_ALT0 = 4,
- BCM2835_FSEL_ALT1 = 5,
- BCM2835_FSEL_ALT2 = 6,
- BCM2835_FSEL_ALT3 = 7,
- BCM2835_FSEL_ALT4 = 3,
- BCM2835_FSEL_ALT5 = 2,
- BCM2835_FSEL_COUNT = 8,
- BCM2835_FSEL_MASK = 0x7,
-};
-
-static const char * const bcm2835_functions[BCM2835_FSEL_COUNT] = {
- [BCM2835_FSEL_GPIO_IN] = "gpio_in",
- [BCM2835_FSEL_GPIO_OUT] = "gpio_out",
- [BCM2835_FSEL_ALT0] = "alt0",
- [BCM2835_FSEL_ALT1] = "alt1",
- [BCM2835_FSEL_ALT2] = "alt2",
- [BCM2835_FSEL_ALT3] = "alt3",
- [BCM2835_FSEL_ALT4] = "alt4",
- [BCM2835_FSEL_ALT5] = "alt5",
-};
-
-static const char * const irq_type_names[] = {
- [IRQ_TYPE_NONE] = "none",
- [IRQ_TYPE_EDGE_RISING] = "edge-rising",
- [IRQ_TYPE_EDGE_FALLING] = "edge-falling",
- [IRQ_TYPE_EDGE_BOTH] = "edge-both",
- [IRQ_TYPE_LEVEL_HIGH] = "level-high",
- [IRQ_TYPE_LEVEL_LOW] = "level-low",
-};
-
-static inline u32 bcm2835_gpio_rd(struct bcm2835_pinctrl *pc, unsigned reg)
-{
- return readl(pc->base + reg);
-}
-
-static inline void bcm2835_gpio_wr(struct bcm2835_pinctrl *pc, unsigned reg,
- u32 val)
-{
- writel(val, pc->base + reg);
-}
-
-static inline int bcm2835_gpio_get_bit(struct bcm2835_pinctrl *pc, unsigned reg,
- unsigned bit)
-{
- reg += GPIO_REG_OFFSET(bit) * 4;
- return (bcm2835_gpio_rd(pc, reg) >> GPIO_REG_SHIFT(bit)) & 1;
-}
-
-/* note NOT a read/modify/write cycle */
-static inline void bcm2835_gpio_set_bit(struct bcm2835_pinctrl *pc,
- unsigned reg, unsigned bit)
-{
- reg += GPIO_REG_OFFSET(bit) * 4;
- bcm2835_gpio_wr(pc, reg, BIT(GPIO_REG_SHIFT(bit)));
-}
-
-static inline enum bcm2835_fsel bcm2835_pinctrl_fsel_get(
- struct bcm2835_pinctrl *pc, unsigned pin)
-{
- u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
- enum bcm2835_fsel status = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
-
- dev_dbg(pc->dev, "get %08x (%u => %s)\n", val, pin,
- bcm2835_functions[status]);
-
- return status;
-}
-
-static inline void bcm2835_pinctrl_fsel_set(
- struct bcm2835_pinctrl *pc, unsigned pin,
- enum bcm2835_fsel fsel)
-{
- u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
- enum bcm2835_fsel cur = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
-
- dev_dbg(pc->dev, "read %08x (%u => %s)\n", val, pin,
- bcm2835_functions[cur]);
-
- if (cur == fsel)
- return;
-
- if (cur != BCM2835_FSEL_GPIO_IN && fsel != BCM2835_FSEL_GPIO_IN) {
- /* always transition through GPIO_IN */
- val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
- val |= BCM2835_FSEL_GPIO_IN << FSEL_SHIFT(pin);
-
- dev_dbg(pc->dev, "trans %08x (%u <= %s)\n", val, pin,
- bcm2835_functions[BCM2835_FSEL_GPIO_IN]);
- bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
- }
-
- val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
- val |= fsel << FSEL_SHIFT(pin);
-
- dev_dbg(pc->dev, "write %08x (%u <= %s)\n", val, pin,
- bcm2835_functions[fsel]);
- bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
-}
-
-static int bcm2835_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
- return pinctrl_request_gpio(chip->base + offset);
-}
-
-static void bcm2835_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
- pinctrl_free_gpio(chip->base + offset);
-}
-
-static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- return pinctrl_gpio_direction_input(chip->base + offset);
-}
-
-static int bcm2835_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
-
- return bcm2835_gpio_get_bit(pc, GPLEV0, offset);
-}
-
-static int bcm2835_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- return pinctrl_gpio_direction_output(chip->base + offset);
-}
-
-static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
-
- bcm2835_gpio_set_bit(pc, value ? GPSET0 : GPCLR0, offset);
-}
-
-static int bcm2835_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
-
- return irq_linear_revmap(pc->irq_domain, offset);
-}
-
-static struct gpio_chip bcm2835_gpio_chip = {
- .label = MODULE_NAME,
- .owner = THIS_MODULE,
- .request = bcm2835_gpio_request,
- .free = bcm2835_gpio_free,
- .direction_input = bcm2835_gpio_direction_input,
- .direction_output = bcm2835_gpio_direction_output,
- .get = bcm2835_gpio_get,
- .set = bcm2835_gpio_set,
- .to_irq = bcm2835_gpio_to_irq,
- .base = -1,
- .ngpio = BCM2835_NUM_GPIOS,
- .can_sleep = false,
-};
-
-static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id)
-{
- struct bcm2835_gpio_irqdata *irqdata = dev_id;
- struct bcm2835_pinctrl *pc = irqdata->pc;
- int bank = irqdata->bank;
- unsigned long events;
- unsigned offset;
- unsigned gpio;
- unsigned int type;
-
- events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4);
- events &= pc->enabled_irq_map[bank];
- for_each_set_bit(offset, &events, 32) {
- gpio = (32 * bank) + offset;
- type = pc->irq_type[gpio];
-
- /* ack edge triggered IRQs immediately */
- if (!(type & IRQ_TYPE_LEVEL_MASK))
- bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
-
- generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio));
-
- /* ack level triggered IRQ after handling them */
- if (type & IRQ_TYPE_LEVEL_MASK)
- bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
- }
- return events ? IRQ_HANDLED : IRQ_NONE;
-}
-
-static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
- unsigned reg, unsigned offset, bool enable)
-{
- u32 value;
- reg += GPIO_REG_OFFSET(offset) * 4;
- value = bcm2835_gpio_rd(pc, reg);
- if (enable)
- value |= BIT(GPIO_REG_SHIFT(offset));
- else
- value &= ~(BIT(GPIO_REG_SHIFT(offset)));
- bcm2835_gpio_wr(pc, reg, value);
-}
-
-/* fast path for IRQ handler */
-static void bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
- unsigned offset, bool enable)
-{
- switch (pc->irq_type[offset]) {
- case IRQ_TYPE_EDGE_RISING:
- __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
- __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- __bcm2835_gpio_irq_config(pc, GPHEN0, offset, enable);
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- __bcm2835_gpio_irq_config(pc, GPLEN0, offset, enable);
- break;
- }
-}
-
-static void bcm2835_gpio_irq_enable(struct irq_data *data)
-{
- struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
- unsigned gpio = irqd_to_hwirq(data);
- unsigned offset = GPIO_REG_SHIFT(gpio);
- unsigned bank = GPIO_REG_OFFSET(gpio);
- unsigned long flags;
-
- spin_lock_irqsave(&pc->irq_lock[bank], flags);
- set_bit(offset, &pc->enabled_irq_map[bank]);
- bcm2835_gpio_irq_config(pc, gpio, true);
- spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
-}
-
-static void bcm2835_gpio_irq_disable(struct irq_data *data)
-{
- struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
- unsigned gpio = irqd_to_hwirq(data);
- unsigned offset = GPIO_REG_SHIFT(gpio);
- unsigned bank = GPIO_REG_OFFSET(gpio);
- unsigned long flags;
-
- spin_lock_irqsave(&pc->irq_lock[bank], flags);
- bcm2835_gpio_irq_config(pc, gpio, false);
- clear_bit(offset, &pc->enabled_irq_map[bank]);
- spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
-}
-
-static int __bcm2835_gpio_irq_set_type_disabled(struct bcm2835_pinctrl *pc,
- unsigned offset, unsigned int type)
-{
- switch (type) {
- case IRQ_TYPE_NONE:
- case IRQ_TYPE_EDGE_RISING:
- case IRQ_TYPE_EDGE_FALLING:
- case IRQ_TYPE_EDGE_BOTH:
- case IRQ_TYPE_LEVEL_HIGH:
- case IRQ_TYPE_LEVEL_LOW:
- pc->irq_type[offset] = type;
- break;
-
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-/* slower path for reconfiguring IRQ type */
-static int __bcm2835_gpio_irq_set_type_enabled(struct bcm2835_pinctrl *pc,
- unsigned offset, unsigned int type)
-{
- switch (type) {
- case IRQ_TYPE_NONE:
- if (pc->irq_type[offset] != type) {
- bcm2835_gpio_irq_config(pc, offset, false);
- pc->irq_type[offset] = type;
- }
- break;
-
- case IRQ_TYPE_EDGE_RISING:
- if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
- /* RISING already enabled, disable FALLING */
- pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
- bcm2835_gpio_irq_config(pc, offset, false);
- pc->irq_type[offset] = type;
- } else if (pc->irq_type[offset] != type) {
- bcm2835_gpio_irq_config(pc, offset, false);
- pc->irq_type[offset] = type;
- bcm2835_gpio_irq_config(pc, offset, true);
- }
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
- /* FALLING already enabled, disable RISING */
- pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
- bcm2835_gpio_irq_config(pc, offset, false);
- pc->irq_type[offset] = type;
- } else if (pc->irq_type[offset] != type) {
- bcm2835_gpio_irq_config(pc, offset, false);
- pc->irq_type[offset] = type;
- bcm2835_gpio_irq_config(pc, offset, true);
- }
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- if (pc->irq_type[offset] == IRQ_TYPE_EDGE_RISING) {
- /* RISING already enabled, enable FALLING too */
- pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
- bcm2835_gpio_irq_config(pc, offset, true);
- pc->irq_type[offset] = type;
- } else if (pc->irq_type[offset] == IRQ_TYPE_EDGE_FALLING) {
- /* FALLING already enabled, enable RISING too */
- pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
- bcm2835_gpio_irq_config(pc, offset, true);
- pc->irq_type[offset] = type;
- } else if (pc->irq_type[offset] != type) {
- bcm2835_gpio_irq_config(pc, offset, false);
- pc->irq_type[offset] = type;
- bcm2835_gpio_irq_config(pc, offset, true);
- }
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- case IRQ_TYPE_LEVEL_LOW:
- if (pc->irq_type[offset] != type) {
- bcm2835_gpio_irq_config(pc, offset, false);
- pc->irq_type[offset] = type;
- bcm2835_gpio_irq_config(pc, offset, true);
- }
- break;
-
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
-{
- struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
- unsigned gpio = irqd_to_hwirq(data);
- unsigned offset = GPIO_REG_SHIFT(gpio);
- unsigned bank = GPIO_REG_OFFSET(gpio);
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&pc->irq_lock[bank], flags);
-
- if (test_bit(offset, &pc->enabled_irq_map[bank]))
- ret = __bcm2835_gpio_irq_set_type_enabled(pc, gpio, type);
- else
- ret = __bcm2835_gpio_irq_set_type_disabled(pc, gpio, type);
-
- spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
-
- return ret;
-}
-
-static struct irq_chip bcm2835_gpio_irq_chip = {
- .name = MODULE_NAME,
- .irq_enable = bcm2835_gpio_irq_enable,
- .irq_disable = bcm2835_gpio_irq_disable,
- .irq_set_type = bcm2835_gpio_irq_set_type,
-};
-
-static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev)
-{
- return ARRAY_SIZE(bcm2835_gpio_groups);
-}
-
-static const char *bcm2835_pctl_get_group_name(struct pinctrl_dev *pctldev,
- unsigned selector)
-{
- return bcm2835_gpio_groups[selector];
-}
-
-static int bcm2835_pctl_get_group_pins(struct pinctrl_dev *pctldev,
- unsigned selector,
- const unsigned **pins,
- unsigned *num_pins)
-{
- *pins = &bcm2835_gpio_pins[selector].number;
- *num_pins = 1;
-
- return 0;
-}
-
-static void bcm2835_pctl_pin_dbg_show(struct pinctrl_dev *pctldev,
- struct seq_file *s,
- unsigned offset)
-{
- struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
- enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset);
- const char *fname = bcm2835_functions[fsel];
- int value = bcm2835_gpio_get_bit(pc, GPLEV0, offset);
- int irq = irq_find_mapping(pc->irq_domain, offset);
-
- seq_printf(s, "function %s in %s; irq %d (%s)",
- fname, value ? "hi" : "lo",
- irq, irq_type_names[pc->irq_type[offset]]);
-}
-
-static void bcm2835_pctl_dt_free_map(struct pinctrl_dev *pctldev,
- struct pinctrl_map *maps, unsigned num_maps)
-{
- int i;
-
- for (i = 0; i < num_maps; i++)
- if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
- kfree(maps[i].data.configs.configs);
-
- kfree(maps);
-}
-
-static int bcm2835_pctl_dt_node_to_map_func(struct bcm2835_pinctrl *pc,
- struct device_node *np, u32 pin, u32 fnum,
- struct pinctrl_map **maps)
-{
- struct pinctrl_map *map = *maps;
-
- if (fnum >= ARRAY_SIZE(bcm2835_functions)) {
- dev_err(pc->dev, "%s: invalid brcm,function %d\n",
- of_node_full_name(np), fnum);
- return -EINVAL;
- }
-
- map->type = PIN_MAP_TYPE_MUX_GROUP;
- map->data.mux.group = bcm2835_gpio_groups[pin];
- map->data.mux.function = bcm2835_functions[fnum];
- (*maps)++;
-
- return 0;
-}
-
-static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc,
- struct device_node *np, u32 pin, u32 pull,
- struct pinctrl_map **maps)
-{
- struct pinctrl_map *map = *maps;
- unsigned long *configs;
-
- if (pull > 2) {
- dev_err(pc->dev, "%s: invalid brcm,pull %d\n",
- of_node_full_name(np), pull);
- return -EINVAL;
- }
-
- configs = kzalloc(sizeof(*configs), GFP_KERNEL);
- if (!configs)
- return -ENOMEM;
- configs[0] = BCM2835_PINCONF_PACK(BCM2835_PINCONF_PARAM_PULL, pull);
-
- map->type = PIN_MAP_TYPE_CONFIGS_PIN;
- map->data.configs.group_or_pin = bcm2835_gpio_pins[pin].name;
- map->data.configs.configs = configs;
- map->data.configs.num_configs = 1;
- (*maps)++;
-
- return 0;
-}
-
-static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
- struct device_node *np,
- struct pinctrl_map **map, unsigned *num_maps)
-{
- struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
- struct property *pins, *funcs, *pulls;
- int num_pins, num_funcs, num_pulls, maps_per_pin;
- struct pinctrl_map *maps, *cur_map;
- int i, err;
- u32 pin, func, pull;
-
- pins = of_find_property(np, "brcm,pins", NULL);
- if (!pins) {
- dev_err(pc->dev, "%s: missing brcm,pins property\n",
- of_node_full_name(np));
- return -EINVAL;
- }
-
- funcs = of_find_property(np, "brcm,function", NULL);
- pulls = of_find_property(np, "brcm,pull", NULL);
-
- if (!funcs && !pulls) {
- dev_err(pc->dev,
- "%s: neither brcm,function nor brcm,pull specified\n",
- of_node_full_name(np));
- return -EINVAL;
- }
-
- num_pins = pins->length / 4;
- num_funcs = funcs ? (funcs->length / 4) : 0;
- num_pulls = pulls ? (pulls->length / 4) : 0;
-
- if (num_funcs > 1 && num_funcs != num_pins) {
- dev_err(pc->dev,
- "%s: brcm,function must have 1 or %d entries\n",
- of_node_full_name(np), num_pins);
- return -EINVAL;
- }
-
- if (num_pulls > 1 && num_pulls != num_pins) {
- dev_err(pc->dev,
- "%s: brcm,pull must have 1 or %d entries\n",
- of_node_full_name(np), num_pins);
- return -EINVAL;
- }
-
- maps_per_pin = 0;
- if (num_funcs)
- maps_per_pin++;
- if (num_pulls)
- maps_per_pin++;
- cur_map = maps = kzalloc(num_pins * maps_per_pin * sizeof(*maps),
- GFP_KERNEL);
- if (!maps)
- return -ENOMEM;
-
- for (i = 0; i < num_pins; i++) {
- err = of_property_read_u32_index(np, "brcm,pins", i, &pin);
- if (err)
- goto out;
- if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) {
- dev_err(pc->dev, "%s: invalid brcm,pins value %d\n",
- of_node_full_name(np), pin);
- err = -EINVAL;
- goto out;
- }
-
- if (num_funcs) {
- err = of_property_read_u32_index(np, "brcm,function",
- (num_funcs > 1) ? i : 0, &func);
- if (err)
- goto out;
- err = bcm2835_pctl_dt_node_to_map_func(pc, np, pin,
- func, &cur_map);
- if (err)
- goto out;
- }
- if (num_pulls) {
- err = of_property_read_u32_index(np, "brcm,pull",
- (num_funcs > 1) ? i : 0, &pull);
- if (err)
- goto out;
- err = bcm2835_pctl_dt_node_to_map_pull(pc, np, pin,
- pull, &cur_map);
- if (err)
- goto out;
- }
- }
-
- *map = maps;
- *num_maps = num_pins * maps_per_pin;
-
- return 0;
-
-out:
- kfree(maps);
- return err;
-}
-
-static const struct pinctrl_ops bcm2835_pctl_ops = {
- .get_groups_count = bcm2835_pctl_get_groups_count,
- .get_group_name = bcm2835_pctl_get_group_name,
- .get_group_pins = bcm2835_pctl_get_group_pins,
- .pin_dbg_show = bcm2835_pctl_pin_dbg_show,
- .dt_node_to_map = bcm2835_pctl_dt_node_to_map,
- .dt_free_map = bcm2835_pctl_dt_free_map,
-};
-
-static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev)
-{
- return BCM2835_FSEL_COUNT;
-}
-
-static const char *bcm2835_pmx_get_function_name(struct pinctrl_dev *pctldev,
- unsigned selector)
-{
- return bcm2835_functions[selector];
-}
-
-static int bcm2835_pmx_get_function_groups(struct pinctrl_dev *pctldev,
- unsigned selector,
- const char * const **groups,
- unsigned * const num_groups)
-{
- /* every pin can do every function */
- *groups = bcm2835_gpio_groups;
- *num_groups = ARRAY_SIZE(bcm2835_gpio_groups);
-
- return 0;
-}
-
-static int bcm2835_pmx_set(struct pinctrl_dev *pctldev,
- unsigned func_selector,
- unsigned group_selector)
-{
- struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
-
- bcm2835_pinctrl_fsel_set(pc, group_selector, func_selector);
-
- return 0;
-}
-
-static void bcm2835_pmx_gpio_disable_free(struct pinctrl_dev *pctldev,
- struct pinctrl_gpio_range *range,
- unsigned offset)
-{
- struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
-
- /* disable by setting to GPIO_IN */
- bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN);
-}
-
-static int bcm2835_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
- struct pinctrl_gpio_range *range,
- unsigned offset,
- bool input)
-{
- struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
- enum bcm2835_fsel fsel = input ?
- BCM2835_FSEL_GPIO_IN : BCM2835_FSEL_GPIO_OUT;
-
- bcm2835_pinctrl_fsel_set(pc, offset, fsel);
-
- return 0;
-}
-
-static const struct pinmux_ops bcm2835_pmx_ops = {
- .get_functions_count = bcm2835_pmx_get_functions_count,
- .get_function_name = bcm2835_pmx_get_function_name,
- .get_function_groups = bcm2835_pmx_get_function_groups,
- .set_mux = bcm2835_pmx_set,
- .gpio_disable_free = bcm2835_pmx_gpio_disable_free,
- .gpio_set_direction = bcm2835_pmx_gpio_set_direction,
-};
-
-static int bcm2835_pinconf_get(struct pinctrl_dev *pctldev,
- unsigned pin, unsigned long *config)
-{
- /* No way to read back config in HW */
- return -ENOTSUPP;
-}
-
-static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
- unsigned pin, unsigned long *configs,
- unsigned num_configs)
-{
- struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
- enum bcm2835_pinconf_param param;
- u16 arg;
- u32 off, bit;
- int i;
-
- for (i = 0; i < num_configs; i++) {
- param = BCM2835_PINCONF_UNPACK_PARAM(configs[i]);
- arg = BCM2835_PINCONF_UNPACK_ARG(configs[i]);
-
- if (param != BCM2835_PINCONF_PARAM_PULL)
- return -EINVAL;
-
- off = GPIO_REG_OFFSET(pin);
- bit = GPIO_REG_SHIFT(pin);
-
- bcm2835_gpio_wr(pc, GPPUD, arg & 3);
- /*
- * Docs say to wait 150 cycles, but not of what. We assume a
- * 1 MHz clock here, which is pretty slow...
- */
- udelay(150);
- bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit));
- udelay(150);
- bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0);
- } /* for each config */
-
- return 0;
-}
-
-static const struct pinconf_ops bcm2835_pinconf_ops = {
- .pin_config_get = bcm2835_pinconf_get,
- .pin_config_set = bcm2835_pinconf_set,
-};
-
-static struct pinctrl_desc bcm2835_pinctrl_desc = {
- .name = MODULE_NAME,
- .pins = bcm2835_gpio_pins,
- .npins = ARRAY_SIZE(bcm2835_gpio_pins),
- .pctlops = &bcm2835_pctl_ops,
- .pmxops = &bcm2835_pmx_ops,
- .confops = &bcm2835_pinconf_ops,
- .owner = THIS_MODULE,
-};
-
-static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
- .name = MODULE_NAME,
- .npins = BCM2835_NUM_GPIOS,
-};
-
-static int bcm2835_pinctrl_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
- struct bcm2835_pinctrl *pc;
- struct resource iomem;
- int err, i;
- BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS);
- BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS);
-
- pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
- if (!pc)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, pc);
- pc->dev = dev;
-
- err = of_address_to_resource(np, 0, &iomem);
- if (err) {
- dev_err(dev, "could not get IO memory\n");
- return err;
- }
-
- pc->base = devm_ioremap_resource(dev, &iomem);
- if (IS_ERR(pc->base))
- return PTR_ERR(pc->base);
-
- pc->gpio_chip = bcm2835_gpio_chip;
- pc->gpio_chip.dev = dev;
- pc->gpio_chip.of_node = np;
-
- pc->irq_domain = irq_domain_add_linear(np, BCM2835_NUM_GPIOS,
- &irq_domain_simple_ops, NULL);
- if (!pc->irq_domain) {
- dev_err(dev, "could not create IRQ domain\n");
- return -ENOMEM;
- }
-
- for (i = 0; i < BCM2835_NUM_GPIOS; i++) {
- int irq = irq_create_mapping(pc->irq_domain, i);
- irq_set_lockdep_class(irq, &gpio_lock_class);
- irq_set_chip_and_handler(irq, &bcm2835_gpio_irq_chip,
- handle_simple_irq);
- irq_set_chip_data(irq, pc);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- for (i = 0; i < BCM2835_NUM_BANKS; i++) {
- unsigned long events;
- unsigned offset;
- int len;
- char *name;
-
- /* clear event detection flags */
- bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0);
- bcm2835_gpio_wr(pc, GPFEN0 + i * 4, 0);
- bcm2835_gpio_wr(pc, GPHEN0 + i * 4, 0);
- bcm2835_gpio_wr(pc, GPLEN0 + i * 4, 0);
- bcm2835_gpio_wr(pc, GPAREN0 + i * 4, 0);
- bcm2835_gpio_wr(pc, GPAFEN0 + i * 4, 0);
-
- /* clear all the events */
- events = bcm2835_gpio_rd(pc, GPEDS0 + i * 4);
- for_each_set_bit(offset, &events, 32)
- bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset));
-
- pc->irq[i] = irq_of_parse_and_map(np, i);
- pc->irq_data[i].pc = pc;
- pc->irq_data[i].bank = i;
- spin_lock_init(&pc->irq_lock[i]);
-
- len = strlen(dev_name(pc->dev)) + 16;
- name = devm_kzalloc(pc->dev, len, GFP_KERNEL);
- if (!name)
- return -ENOMEM;
- snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i);
-
- err = devm_request_irq(dev, pc->irq[i],
- bcm2835_gpio_irq_handler, IRQF_SHARED,
- name, &pc->irq_data[i]);
- if (err) {
- dev_err(dev, "unable to request IRQ %d\n", pc->irq[i]);
- return err;
- }
- }
-
- err = gpiochip_add(&pc->gpio_chip);
- if (err) {
- dev_err(dev, "could not add GPIO chip\n");
- return err;
- }
-
- pc->pctl_dev = pinctrl_register(&bcm2835_pinctrl_desc, dev, pc);
- if (!pc->pctl_dev) {
- gpiochip_remove(&pc->gpio_chip);
- return -EINVAL;
- }
-
- pc->gpio_range = bcm2835_pinctrl_gpio_range;
- pc->gpio_range.base = pc->gpio_chip.base;
- pc->gpio_range.gc = &pc->gpio_chip;
- pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
-
- return 0;
-}
-
-static int bcm2835_pinctrl_remove(struct platform_device *pdev)
-{
- struct bcm2835_pinctrl *pc = platform_get_drvdata(pdev);
-
- pinctrl_unregister(pc->pctl_dev);
- gpiochip_remove(&pc->gpio_chip);
-
- return 0;
-}
-
-static struct of_device_id bcm2835_pinctrl_match[] = {
- { .compatible = "brcm,bcm2835-gpio" },
- {}
-};
-MODULE_DEVICE_TABLE(of, bcm2835_pinctrl_match);
-
-static struct platform_driver bcm2835_pinctrl_driver = {
- .probe = bcm2835_pinctrl_probe,
- .remove = bcm2835_pinctrl_remove,
- .driver = {
- .name = MODULE_NAME,
- .of_match_table = bcm2835_pinctrl_match,
- },
-};
-module_platform_driver(bcm2835_pinctrl_driver);
-
-MODULE_AUTHOR("Chris Boot, Simon Arlott, Stephen Warren");
-MODULE_DESCRIPTION("BCM2835 Pin control driver");
-MODULE_LICENSE("GPL");
--
1.7.9.5

2015-02-04 02:09:14

by Ray Jui

[permalink] [raw]
Subject: [PATCH v4 2/4] pinctrl: Broadcom Cygnus pinctrl device tree binding

Device tree binding documentation for Broadcom Cygnus IOMUX driver

Signed-off-by: Ray Jui <[email protected]>
Reviewed-by: Scott Branden <[email protected]>
---
.../bindings/pinctrl/brcm,cygnus-pinmux.txt | 157 ++++++++++++++++++++
1 file changed, 157 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt
new file mode 100644
index 0000000..985ad90
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt
@@ -0,0 +1,157 @@
+Broadcom Cygnus IOMUX Controller
+
+The Cygnus IOMUX controller supports group based mux configuration. In
+addition, certain pins can be muxed to GPIO function individually.
+
+Required properties:
+
+- compatible:
+ Must be "brcm,cygnus-pinmux"
+
+- reg:
+ Define the base and range of the I/O address space that contains the Cygnus
+IOMUX registers
+
+Required properties in child nodes:
+
+- function:
+ The mux function to select
+
+- groups:
+ The list of groups to select with a given function
+
+Each child node represents a configuration. Client devices reference the child
+node to enable a mux configuration
+
+For more details, refer to
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+For example:
+
+ pinmux: pinmux@0x0301d0c8 {
+ compatible = "brcm,cygnus-pinmux";
+ reg = <0x0301d0c8 0x1b0>;
+
+ i2s_0: i2s_0 {
+ function = "i2s0";
+ groups = "i2s0_0_grp", "i2s0_1_grp";
+ };
+
+ i2s_1: i2s_1 {
+ function = "i2s1";
+ groups = "i2s1_0_grp", "i2s1_1_grp";
+ };
+
+ i2s_2: i2s_2 {
+ function = "i2s2";
+ groups = "i2s2_0_grp", "i2s2_1_grp", "i2s2_2_grp",
+ "i2s2_3_grp", "i2s2_4_grp";
+ };
+
+ spi_0: spi_0 {
+ function = "spi0";
+ groups = "spi0_grp";
+ };
+ }
+
+ spi0@18028000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x18028000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&spi_0>;
+ clocks = <&axi81_clk>;
+ clock-names = "apb_pclk";
+ };
+
+List of supported functions and groups in Cygnus:
+
+"i2s0": "i2s0_0_grp", "i2s0_1_grp"
+
+"i2s1": "i2s1_0_grp", "i2s1_1_grp"
+
+"i2s2": "i2s2_0_grp", "i2s2_1_grp", "i2s2_2_grp", "i2s2_3_grp", "i2s2_4_grp"
+
+"spdif": "spdif_grp"
+
+"pwm0": "pwm0_grp"
+
+"pwm1": "pwm1_grp"
+
+"pwm2": "pwm2_grp"
+
+"pwm3": "pwm3_grp"
+
+"pwm4": "pwm4_grp"
+
+"pwm5": "pwm5_grp"
+
+"key": "key0_grp", "key1_grp", "key2_grp", "key3_grp", "key4_grp", "key5_grp",
+"key6_grp", "key7_grp", "key8_grp", "key9_grp", "key10_grp", "key11_grp",
+"key12_grp", "key13_grp", "key14_grp", "key15_grp"
+
+"audio_dte": "audio_dte0_grp", "audio_dte1_grp", "audio_dte2_grp", "audio_dte3_grp"
+
+"smart_card0": "smart_card0_grp", "smart_card0_fcb_grp"
+
+"smart_card1": "smart_card1_grp", "smart_card1_fcb_grp"
+
+"spi0": "spi0_grp"
+
+"spi1": "spi1_grp"
+
+"spi2": "spi2_grp"
+
+"spi3": "spi3_grp"
+
+"spi4": "spi4_0_grp", "spi4_1_grp"
+
+"spi5": "spi5_grp"
+
+"sw_led0": "sw_led0_0_grp", "sw_led0_1_grp"
+
+"sw_led1": "sw_led1_grp"
+
+"sw_led2": "sw_led2_0_grp", "sw_led2_1_grp"
+
+"d1w": "d1w_grp"
+
+"lcd": "lcd_grp"
+
+"sram": "sram_0_grp", "sram_1_grp"
+
+"uart0": "uart0_grp"
+
+"uart1": "uart1_grp", "uart1_dte_grp"
+
+"uart2": "uart2_grp"
+
+"uart3": "uart3_grp"
+
+"uart4": "uart4_grp"
+
+"qspi": "qspi_0_grp", "qspi_1_grp"
+
+"nand": "nand_grp"
+
+"sdio0": "sdio0_grp", "sdio0_cd_grp", "sdio0_mmc_grp"
+
+"sdio1": "sdio1_data_0_grp", "sdio1_data_1_grp", "sdio1_cd_grp",
+"sdio1_led_grp", "sdio1_mmc_grp"
+
+"can0": "can0_grp"
+
+"can1": "can1_grp"
+
+"cam": "cam_led_grp", "cam_0_grp", "cam_1_grp"
+
+"bsc1": "bsc1_grp"
+
+"pcie_clkreq": "pcie_clkreq_grp"
+
+"usb0_oc": "usb0_oc_grp"
+
+"usb1_oc": "usb1_oc_grp"
+
+"usb2_oc": "usb2_oc_grp"
--
1.7.9.5

2015-02-04 02:09:08

by Ray Jui

[permalink] [raw]
Subject: [PATCH v4 3/4] pinctrl: cygnus: add initial IOMUX driver support

This adds the initial driver support for the Broadcom Cygnus IOMUX
controller. The Cygnus IOMUX controller supports group based mux
configuration but allows certain pins to be muxed to GPIO individually

Signed-off-by: Ray Jui <[email protected]>
Reviewed-by: Scott Branden <[email protected]>
---
drivers/pinctrl/bcm/Kconfig | 13 +
drivers/pinctrl/bcm/Makefile | 5 +-
drivers/pinctrl/bcm/pinctrl-cygnus-mux.c | 1088 ++++++++++++++++++++++++++++++
3 files changed, 1104 insertions(+), 2 deletions(-)
create mode 100644 drivers/pinctrl/bcm/pinctrl-cygnus-mux.c

diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index bc6d048..eb13201 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -19,3 +19,16 @@ config PINCTRL_BCM2835
bool
select PINMUX
select PINCONF
+
+config PINCTRL_CYGNUS_MUX
+ bool "Broadcom Cygnus IOMUX driver"
+ depends on (ARCH_BCM_CYGNUS || COMPILE_TEST)
+ select PINMUX
+ select GENERIC_PINCONF
+ default ARCH_BCM_CYGNUS
+ help
+ Say yes here to enable the Broadcom Cygnus IOMUX driver.
+
+ The Broadcom Cygnus IOMUX driver supports group based IOMUX
+ configuration, with the exception that certain individual pins
+ can be overrided to GPIO function
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 7ba80a3..bb6beb6 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -1,4 +1,5 @@
# Broadcom pinctrl support

-obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
-obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
+obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
+obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
+obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
diff --git a/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c b/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
new file mode 100644
index 0000000..c4c4ed2
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
@@ -0,0 +1,1088 @@
+/* Copyright (C) 2014-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This file contains the Cygnus IOMUX driver that supports group based PINMUX
+ * configuration. Although PINMUX configuration is mainly group based, the
+ * Cygnus IOMUX controller allows certain pins to be individually muxed to GPIO
+ * function, and therefore be controlled by the Cygnus ASIU GPIO controller
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include "../core.h"
+#include "../pinctrl-utils.h"
+
+#define CYGNUS_NUM_IOMUX_REGS 8
+#define CYGNUS_NUM_MUX_PER_REG 8
+#define CYGNUS_NUM_IOMUX (CYGNUS_NUM_IOMUX_REGS * \
+ CYGNUS_NUM_MUX_PER_REG)
+
+/*
+ * Cygnus IOMUX register description
+ *
+ * @offset: register offset for mux configuration of a group
+ * @shift: bit shift for mux configuration of a group
+ * @alt: alternate function to set to
+ */
+struct cygnus_mux {
+ unsigned int offset;
+ unsigned int shift;
+ unsigned int alt;
+};
+
+/*
+ * Keep track of Cygnus IOMUX configuration and prevent double configuration
+ *
+ * @cygnus_mux: Cygnus IOMUX register description
+ * @is_configured: flag to indicate whether a mux setting has already been
+ * configured
+ */
+struct cygnus_mux_log {
+ struct cygnus_mux mux;
+ bool is_configured;
+};
+
+/*
+ * Group based IOMUX configuration
+ *
+ * @name: name of the group
+ * @pins: array of pins used by this group
+ * @num_pins: total number of pins used by this group
+ * @mux: Cygnus group based IOMUX configuration
+ */
+struct cygnus_pin_group {
+ const char *name;
+ const unsigned *pins;
+ unsigned num_pins;
+ struct cygnus_mux mux;
+};
+
+/*
+ * Cygnus mux function and supported pin groups
+ *
+ * @name: name of the function
+ * @groups: array of groups that can be supported by this function
+ * @num_groups: total number of groups that can be supported by this function
+ */
+struct cygnus_pin_function {
+ const char *name;
+ const char * const *groups;
+ unsigned num_groups;
+};
+
+/*
+ * Cygnus IOMUX pinctrl core
+ *
+ * @pctl: pointer to pinctrl_dev
+ * @dev: pointer to device
+ * @base0: first I/O register base of the Cygnus IOMUX controller
+ * @base1: second I/O register base
+ * @groups: pointer to array of groups
+ * @num_groups: total number of groups
+ * @functions: pointer to array of functions
+ * @num_functions: total number of functions
+ * @mux_log: pointer to the array of mux logs
+ * @lock: lock to protect register access
+ */
+struct cygnus_pinctrl {
+ struct pinctrl_dev *pctl;
+ struct device *dev;
+ void __iomem *base0;
+ void __iomem *base1;
+
+ const struct cygnus_pin_group *groups;
+ unsigned num_groups;
+
+ const struct cygnus_pin_function *functions;
+ unsigned num_functions;
+
+ struct cygnus_mux_log *mux_log;
+
+ spinlock_t lock;
+};
+
+/*
+ * Certain pins can be individually muxed to GPIO function
+ *
+ * @is_supported: flag to indicate GPIO mux is supported for this pin
+ * @offset: register offset for GPIO mux override of a pin
+ * @shift: bit shift for GPIO mux override of a pin
+ */
+struct cygnus_gpio_mux {
+ int is_supported;
+ unsigned int offset;
+ unsigned int shift;
+};
+
+/*
+ * Description of a pin in Cygnus
+ *
+ * @pin: pin number
+ * @name: pin name
+ * @gpio_mux: GPIO override related information
+ */
+struct cygnus_pin {
+ unsigned pin;
+ char *name;
+ struct cygnus_gpio_mux gpio_mux;
+};
+
+#define CYGNUS_PIN_DESC(p, n, i, o, s) \
+{ \
+ .pin = p, \
+ .name = n, \
+ .gpio_mux = { \
+ .is_supported = i, \
+ .offset = o, \
+ .shift = s, \
+ }, \
+}
+
+/*
+ * List of pins in Cygnus
+ */
+static struct cygnus_pin cygnus_pins[] = {
+ CYGNUS_PIN_DESC(0, "ext_device_reset_n", 0, 0, 0),
+ CYGNUS_PIN_DESC(1, "chip_mode0", 0, 0, 0),
+ CYGNUS_PIN_DESC(2, "chip_mode1", 0, 0, 0),
+ CYGNUS_PIN_DESC(3, "chip_mode2", 0, 0, 0),
+ CYGNUS_PIN_DESC(4, "chip_mode3", 0, 0, 0),
+ CYGNUS_PIN_DESC(5, "chip_mode4", 0, 0, 0),
+ CYGNUS_PIN_DESC(6, "bsc0_scl", 0, 0, 0),
+ CYGNUS_PIN_DESC(7, "bsc0_sda", 0, 0, 0),
+ CYGNUS_PIN_DESC(8, "bsc1_scl", 0, 0, 0),
+ CYGNUS_PIN_DESC(9, "bsc1_sda", 0, 0, 0),
+ CYGNUS_PIN_DESC(10, "d1w_dq", 1, 0x28, 0),
+ CYGNUS_PIN_DESC(11, "d1wowstz_l", 1, 0x4, 28),
+ CYGNUS_PIN_DESC(12, "gpio0", 0, 0, 0),
+ CYGNUS_PIN_DESC(13, "gpio1", 0, 0, 0),
+ CYGNUS_PIN_DESC(14, "gpio2", 0, 0, 0),
+ CYGNUS_PIN_DESC(15, "gpio3", 0, 0, 0),
+ CYGNUS_PIN_DESC(16, "gpio4", 0, 0, 0),
+ CYGNUS_PIN_DESC(17, "gpio5", 0, 0, 0),
+ CYGNUS_PIN_DESC(18, "gpio6", 0, 0, 0),
+ CYGNUS_PIN_DESC(19, "gpio7", 0, 0, 0),
+ CYGNUS_PIN_DESC(20, "gpio8", 0, 0, 0),
+ CYGNUS_PIN_DESC(21, "gpio9", 0, 0, 0),
+ CYGNUS_PIN_DESC(22, "gpio10", 0, 0, 0),
+ CYGNUS_PIN_DESC(23, "gpio11", 0, 0, 0),
+ CYGNUS_PIN_DESC(24, "gpio12", 0, 0, 0),
+ CYGNUS_PIN_DESC(25, "gpio13", 0, 0, 0),
+ CYGNUS_PIN_DESC(26, "gpio14", 0, 0, 0),
+ CYGNUS_PIN_DESC(27, "gpio15", 0, 0, 0),
+ CYGNUS_PIN_DESC(28, "gpio16", 0, 0, 0),
+ CYGNUS_PIN_DESC(29, "gpio17", 0, 0, 0),
+ CYGNUS_PIN_DESC(30, "gpio18", 0, 0, 0),
+ CYGNUS_PIN_DESC(31, "gpio19", 0, 0, 0),
+ CYGNUS_PIN_DESC(32, "gpio20", 0, 0, 0),
+ CYGNUS_PIN_DESC(33, "gpio21", 0, 0, 0),
+ CYGNUS_PIN_DESC(34, "gpio22", 0, 0, 0),
+ CYGNUS_PIN_DESC(35, "gpio23", 0, 0, 0),
+ CYGNUS_PIN_DESC(36, "mdc", 0, 0, 0),
+ CYGNUS_PIN_DESC(37, "mdio", 0, 0, 0),
+ CYGNUS_PIN_DESC(38, "pwm0", 1, 0x10, 30),
+ CYGNUS_PIN_DESC(39, "pwm1", 1, 0x10, 28),
+ CYGNUS_PIN_DESC(40, "pwm2", 1, 0x10, 26),
+ CYGNUS_PIN_DESC(41, "pwm3", 1, 0x10, 24),
+ CYGNUS_PIN_DESC(42, "sc0_clk", 1, 0x10, 22),
+ CYGNUS_PIN_DESC(43, "sc0_cmdvcc_l", 1, 0x10, 20),
+ CYGNUS_PIN_DESC(44, "sc0_detect", 1, 0x10, 18),
+ CYGNUS_PIN_DESC(45, "sc0_fcb", 1, 0x10, 16),
+ CYGNUS_PIN_DESC(46, "sc0_io", 1, 0x10, 14),
+ CYGNUS_PIN_DESC(47, "sc0_rst_l", 1, 0x10, 12),
+ CYGNUS_PIN_DESC(48, "sc1_clk", 1, 0x10, 10),
+ CYGNUS_PIN_DESC(49, "sc1_cmdvcc_l", 1, 0x10, 8),
+ CYGNUS_PIN_DESC(50, "sc1_detect", 1, 0x10, 6),
+ CYGNUS_PIN_DESC(51, "sc1_fcb", 1, 0x10, 4),
+ CYGNUS_PIN_DESC(52, "sc1_io", 1, 0x10, 2),
+ CYGNUS_PIN_DESC(53, "sc1_rst_l", 1, 0x10, 0),
+ CYGNUS_PIN_DESC(54, "spi0_clk", 1, 0x18, 10),
+ CYGNUS_PIN_DESC(55, "spi0_mosi", 1, 0x18, 6),
+ CYGNUS_PIN_DESC(56, "spi0_miso", 1, 0x18, 8),
+ CYGNUS_PIN_DESC(57, "spi0_ss", 1, 0x18, 4),
+ CYGNUS_PIN_DESC(58, "spi1_clk", 1, 0x18, 2),
+ CYGNUS_PIN_DESC(59, "spi1_mosi", 1, 0x1c, 30),
+ CYGNUS_PIN_DESC(60, "spi1_miso", 1, 0x18, 0),
+ CYGNUS_PIN_DESC(61, "spi1_ss", 1, 0x1c, 28),
+ CYGNUS_PIN_DESC(62, "spi2_clk", 1, 0x1c, 26),
+ CYGNUS_PIN_DESC(63, "spi2_mosi", 1, 0x1c, 22),
+ CYGNUS_PIN_DESC(64, "spi2_miso", 1, 0x1c, 24),
+ CYGNUS_PIN_DESC(65, "spi2_ss", 1, 0x1c, 20),
+ CYGNUS_PIN_DESC(66, "spi3_clk", 1, 0x1c, 18),
+ CYGNUS_PIN_DESC(67, "spi3_mosi", 1, 0x1c, 14),
+ CYGNUS_PIN_DESC(68, "spi3_miso", 1, 0x1c, 16),
+ CYGNUS_PIN_DESC(69, "spi3_ss", 1, 0x1c, 12),
+ CYGNUS_PIN_DESC(70, "uart0_cts", 1, 0x1c, 10),
+ CYGNUS_PIN_DESC(71, "uart0_rts", 1, 0x1c, 8),
+ CYGNUS_PIN_DESC(72, "uart0_rx", 1, 0x1c, 6),
+ CYGNUS_PIN_DESC(73, "uart0_tx", 1, 0x1c, 4),
+ CYGNUS_PIN_DESC(74, "uart1_cts", 1, 0x1c, 2),
+ CYGNUS_PIN_DESC(75, "uart1_dcd", 1, 0x1c, 0),
+ CYGNUS_PIN_DESC(76, "uart1_dsr", 1, 0x20, 14),
+ CYGNUS_PIN_DESC(77, "uart1_dtr", 1, 0x20, 12),
+ CYGNUS_PIN_DESC(78, "uart1_ri", 1, 0x20, 10),
+ CYGNUS_PIN_DESC(79, "uart1_rts", 1, 0x20, 8),
+ CYGNUS_PIN_DESC(80, "uart1_rx", 1, 0x20, 6),
+ CYGNUS_PIN_DESC(81, "uart1_tx", 1, 0x20, 4),
+ CYGNUS_PIN_DESC(82, "uart3_rx", 1, 0x20, 2),
+ CYGNUS_PIN_DESC(83, "uart3_tx", 1, 0x20, 0),
+ CYGNUS_PIN_DESC(84, "sdio1_clk_sdcard", 1, 0x14, 6),
+ CYGNUS_PIN_DESC(85, "sdio1_cmd", 1, 0x14, 4),
+ CYGNUS_PIN_DESC(86, "sdio1_data0", 1, 0x14, 2),
+ CYGNUS_PIN_DESC(87, "sdio1_data1", 1, 0x14, 0),
+ CYGNUS_PIN_DESC(88, "sdio1_data2", 1, 0x18, 30),
+ CYGNUS_PIN_DESC(89, "sdio1_data3", 1, 0x18, 28),
+ CYGNUS_PIN_DESC(90, "sdio1_wp_n", 1, 0x18, 24),
+ CYGNUS_PIN_DESC(91, "sdio1_card_rst", 1, 0x14, 10),
+ CYGNUS_PIN_DESC(92, "sdio1_led_on", 1, 0x18, 26),
+ CYGNUS_PIN_DESC(93, "sdio1_cd", 1, 0x14, 8),
+ CYGNUS_PIN_DESC(94, "sdio0_clk_sdcard", 1, 0x14, 26),
+ CYGNUS_PIN_DESC(95, "sdio0_cmd", 1, 0x14, 24),
+ CYGNUS_PIN_DESC(96, "sdio0_data0", 1, 0x14, 22),
+ CYGNUS_PIN_DESC(97, "sdio0_data1", 1, 0x14, 20),
+ CYGNUS_PIN_DESC(98, "sdio0_data2", 1, 0x14, 18),
+ CYGNUS_PIN_DESC(99, "sdio0_data3", 1, 0x14, 16),
+ CYGNUS_PIN_DESC(100, "sdio0_wp_n", 1, 0x14, 12),
+ CYGNUS_PIN_DESC(101, "sdio0_card_rst", 1, 0x14, 30),
+ CYGNUS_PIN_DESC(102, "sdio0_led_on", 1, 0x14, 14),
+ CYGNUS_PIN_DESC(103, "sdio0_cd", 1, 0x14, 28),
+ CYGNUS_PIN_DESC(104, "sflash_clk", 1, 0x18, 22),
+ CYGNUS_PIN_DESC(105, "sflash_cs_l", 1, 0x18, 20),
+ CYGNUS_PIN_DESC(106, "sflash_mosi", 1, 0x18, 14),
+ CYGNUS_PIN_DESC(107, "sflash_miso", 1, 0x18, 16),
+ CYGNUS_PIN_DESC(108, "sflash_wp_n", 1, 0x18, 12),
+ CYGNUS_PIN_DESC(109, "sflash_hold_n", 1, 0x18, 18),
+ CYGNUS_PIN_DESC(110, "nand_ale", 1, 0xc, 30),
+ CYGNUS_PIN_DESC(111, "nand_ce0_l", 1, 0xc, 28),
+ CYGNUS_PIN_DESC(112, "nand_ce1_l", 1, 0xc, 26),
+ CYGNUS_PIN_DESC(113, "nand_cle", 1, 0xc, 24),
+ CYGNUS_PIN_DESC(114, "nand_dq0", 1, 0xc, 22),
+ CYGNUS_PIN_DESC(115, "nand_dq1", 1, 0xc, 20),
+ CYGNUS_PIN_DESC(116, "nand_dq2", 1, 0xc, 18),
+ CYGNUS_PIN_DESC(117, "nand_dq3", 1, 0xc, 16),
+ CYGNUS_PIN_DESC(118, "nand_dq4", 1, 0xc, 14),
+ CYGNUS_PIN_DESC(119, "nand_dq5", 1, 0xc, 12),
+ CYGNUS_PIN_DESC(120, "nand_dq6", 1, 0xc, 10),
+ CYGNUS_PIN_DESC(121, "nand_dq7", 1, 0xc, 8),
+ CYGNUS_PIN_DESC(122, "nand_rb_l", 1, 0xc, 6),
+ CYGNUS_PIN_DESC(123, "nand_re_l", 1, 0xc, 4),
+ CYGNUS_PIN_DESC(124, "nand_we_l", 1, 0xc, 2),
+ CYGNUS_PIN_DESC(125, "nand_wp_l", 1, 0xc, 0),
+ CYGNUS_PIN_DESC(126, "lcd_clac", 1, 0x4, 26),
+ CYGNUS_PIN_DESC(127, "lcd_clcp", 1, 0x4, 24),
+ CYGNUS_PIN_DESC(128, "lcd_cld0", 1, 0x4, 22),
+ CYGNUS_PIN_DESC(129, "lcd_cld1", 1, 0x4, 0),
+ CYGNUS_PIN_DESC(130, "lcd_cld10", 1, 0x4, 20),
+ CYGNUS_PIN_DESC(131, "lcd_cld11", 1, 0x4, 18),
+ CYGNUS_PIN_DESC(132, "lcd_cld12", 1, 0x4, 16),
+ CYGNUS_PIN_DESC(133, "lcd_cld13", 1, 0x4, 14),
+ CYGNUS_PIN_DESC(134, "lcd_cld14", 1, 0x4, 12),
+ CYGNUS_PIN_DESC(135, "lcd_cld15", 1, 0x4, 10),
+ CYGNUS_PIN_DESC(136, "lcd_cld16", 1, 0x4, 8),
+ CYGNUS_PIN_DESC(137, "lcd_cld17", 1, 0x4, 6),
+ CYGNUS_PIN_DESC(138, "lcd_cld18", 1, 0x4, 4),
+ CYGNUS_PIN_DESC(139, "lcd_cld19", 1, 0x4, 2),
+ CYGNUS_PIN_DESC(140, "lcd_cld2", 1, 0x8, 22),
+ CYGNUS_PIN_DESC(141, "lcd_cld20", 1, 0x8, 30),
+ CYGNUS_PIN_DESC(142, "lcd_cld21", 1, 0x8, 28),
+ CYGNUS_PIN_DESC(143, "lcd_cld22", 1, 0x8, 26),
+ CYGNUS_PIN_DESC(144, "lcd_cld23", 1, 0x8, 24),
+ CYGNUS_PIN_DESC(145, "lcd_cld3", 1, 0x8, 20),
+ CYGNUS_PIN_DESC(146, "lcd_cld4", 1, 0x8, 18),
+ CYGNUS_PIN_DESC(147, "lcd_cld5", 1, 0x8, 16),
+ CYGNUS_PIN_DESC(148, "lcd_cld6", 1, 0x8, 14),
+ CYGNUS_PIN_DESC(149, "lcd_cld7", 1, 0x8, 12),
+ CYGNUS_PIN_DESC(150, "lcd_cld8", 1, 0x8, 10),
+ CYGNUS_PIN_DESC(151, "lcd_cld9", 1, 0x8, 8),
+ CYGNUS_PIN_DESC(152, "lcd_clfp", 1, 0x8, 6),
+ CYGNUS_PIN_DESC(153, "lcd_clle", 1, 0x8, 4),
+ CYGNUS_PIN_DESC(154, "lcd_cllp", 1, 0x8, 2),
+ CYGNUS_PIN_DESC(155, "lcd_clpower", 1, 0x8, 0),
+ CYGNUS_PIN_DESC(156, "camera_vsync", 1, 0x4, 30),
+ CYGNUS_PIN_DESC(157, "camera_trigger", 1, 0x0, 0),
+ CYGNUS_PIN_DESC(158, "camera_strobe", 1, 0x0, 2),
+ CYGNUS_PIN_DESC(159, "camera_standby", 1, 0x0, 4),
+ CYGNUS_PIN_DESC(160, "camera_reset_n", 1, 0x0, 6),
+ CYGNUS_PIN_DESC(161, "camera_pixdata9", 1, 0x0, 8),
+ CYGNUS_PIN_DESC(162, "camera_pixdata8", 1, 0x0, 10),
+ CYGNUS_PIN_DESC(163, "camera_pixdata7", 1, 0x0, 12),
+ CYGNUS_PIN_DESC(164, "camera_pixdata6", 1, 0x0, 14),
+ CYGNUS_PIN_DESC(165, "camera_pixdata5", 1, 0x0, 16),
+ CYGNUS_PIN_DESC(166, "camera_pixdata4", 1, 0x0, 18),
+ CYGNUS_PIN_DESC(167, "camera_pixdata3", 1, 0x0, 20),
+ CYGNUS_PIN_DESC(168, "camera_pixdata2", 1, 0x0, 22),
+ CYGNUS_PIN_DESC(169, "camera_pixdata1", 1, 0x0, 24),
+ CYGNUS_PIN_DESC(170, "camera_pixdata0", 1, 0x0, 26),
+ CYGNUS_PIN_DESC(171, "camera_pixclk", 1, 0x0, 28),
+ CYGNUS_PIN_DESC(172, "camera_hsync", 1, 0x0, 30),
+ CYGNUS_PIN_DESC(173, "camera_pll_ref_clk", 0, 0, 0),
+ CYGNUS_PIN_DESC(174, "usb_id_indication", 0, 0, 0),
+ CYGNUS_PIN_DESC(175, "usb_vbus_indication", 0, 0, 0),
+ CYGNUS_PIN_DESC(176, "gpio0_3p3", 0, 0, 0),
+ CYGNUS_PIN_DESC(177, "gpio1_3p3", 0, 0, 0),
+ CYGNUS_PIN_DESC(178, "gpio2_3p3", 0, 0, 0),
+ CYGNUS_PIN_DESC(179, "gpio3_3p3", 0, 0, 0),
+};
+
+/*
+ * List of groups of pins
+ */
+static const unsigned bsc1_pins[] = { 8, 9 };
+static const unsigned pcie_clkreq_pins[] = { 8, 9 };
+
+static const unsigned i2s2_0_pins[] = { 12 };
+static const unsigned i2s2_1_pins[] = { 13 };
+static const unsigned i2s2_2_pins[] = { 14 };
+static const unsigned i2s2_3_pins[] = { 15 };
+static const unsigned i2s2_4_pins[] = { 16 };
+
+static const unsigned pwm4_pins[] = { 17 };
+static const unsigned pwm5_pins[] = { 18 };
+
+static const unsigned key0_pins[] = { 20 };
+static const unsigned key1_pins[] = { 21 };
+static const unsigned key2_pins[] = { 22 };
+static const unsigned key3_pins[] = { 23 };
+static const unsigned key4_pins[] = { 24 };
+static const unsigned key5_pins[] = { 25 };
+
+static const unsigned key6_pins[] = { 26 };
+static const unsigned audio_dte0_pins[] = { 26 };
+
+static const unsigned key7_pins[] = { 27 };
+static const unsigned audio_dte1_pins[] = { 27 };
+
+static const unsigned key8_pins[] = { 28 };
+static const unsigned key9_pins[] = { 29 };
+static const unsigned key10_pins[] = { 30 };
+static const unsigned key11_pins[] = { 31 };
+static const unsigned key12_pins[] = { 32 };
+static const unsigned key13_pins[] = { 33 };
+
+static const unsigned key14_pins[] = { 34 };
+static const unsigned audio_dte2_pins[] = { 34 };
+
+static const unsigned key15_pins[] = { 35 };
+static const unsigned audio_dte3_pins[] = { 35 };
+
+static const unsigned pwm0_pins[] = { 38 };
+static const unsigned pwm1_pins[] = { 39 };
+static const unsigned pwm2_pins[] = { 40 };
+static const unsigned pwm3_pins[] = { 41 };
+
+static const unsigned sdio0_pins[] = { 94, 95, 96, 97, 98, 99 };
+
+static const unsigned smart_card0_pins[] = { 42, 43, 44, 46, 47 };
+static const unsigned i2s0_0_pins[] = { 42, 43, 44, 46 };
+static const unsigned spdif_pins[] = { 47 };
+
+static const unsigned smart_card1_pins[] = { 48, 49, 50, 52, 53 };
+static const unsigned i2s1_0_pins[] = { 48, 49, 50, 52 };
+
+static const unsigned spi0_pins[] = { 54, 55, 56, 57 };
+
+static const unsigned spi1_pins[] = { 58, 59, 60, 61 };
+
+static const unsigned spi2_pins[] = { 62, 63, 64, 65 };
+
+static const unsigned spi3_pins[] = { 66, 67, 68, 69 };
+static const unsigned sw_led0_0_pins[] = { 66, 67, 68, 69 };
+
+static const unsigned d1w_pins[] = { 10, 11 };
+static const unsigned uart4_pins[] = { 10, 11 };
+static const unsigned sw_led2_0_pins[] = { 10, 11 };
+
+static const unsigned lcd_pins[] = { 126, 127, 128, 129, 130, 131, 132, 133,
+ 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147,
+ 148, 149, 150, 151, 152, 153, 154, 155 };
+static const unsigned sram_0_pins[] = { 126, 127, 128, 129, 130, 131, 132, 133,
+ 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147,
+ 148, 149, 150, 151, 152, 153, 154, 155 };
+static const unsigned spi5_pins[] = { 141, 142, 143, 144 };
+
+static const unsigned uart0_pins[] = { 70, 71, 72, 73 };
+static const unsigned sw_led0_1_pins[] = { 70, 71, 72, 73 };
+
+static const unsigned uart1_dte_pins[] = { 75, 76, 77, 78 };
+static const unsigned uart2_pins[] = { 75, 76, 77, 78 };
+
+static const unsigned uart1_pins[] = { 74, 79, 80, 81 };
+
+static const unsigned uart3_pins[] = { 82, 83 };
+
+static const unsigned qspi_0_pins[] = { 104, 105, 106, 107 };
+
+static const unsigned nand_pins[] = { 110, 111, 112, 113, 114, 115, 116, 117,
+ 118, 119, 120, 121, 122, 123, 124, 125 };
+
+static const unsigned sdio0_cd_pins[] = { 103 };
+
+static const unsigned sdio0_mmc_pins[] = { 100, 101, 102 };
+
+static const unsigned sdio1_data_0_pins[] = { 86, 87 };
+static const unsigned can0_pins[] = { 86, 87 };
+static const unsigned spi4_0_pins[] = { 86, 87 };
+
+static const unsigned sdio1_data_1_pins[] = { 88, 89 };
+static const unsigned can1_pins[] = { 88, 89 };
+static const unsigned spi4_1_pins[] = { 88, 89 };
+
+static const unsigned sdio1_cd_pins[] = { 93 };
+
+static const unsigned sdio1_led_pins[] = { 84, 85 };
+static const unsigned sw_led2_1_pins[] = { 84, 85 };
+
+static const unsigned sdio1_mmc_pins[] = { 90, 91, 92 };
+
+static const unsigned cam_led_pins[] = { 156, 157, 158, 159, 160 };
+static const unsigned sw_led1_pins[] = { 156, 157, 158, 159 };
+
+static const unsigned cam_0_pins[] = { 169, 170, 171, 169, 170 };
+
+static const unsigned cam_1_pins[] = { 161, 162, 163, 164, 165, 166, 167,
+ 168 };
+static const unsigned sram_1_pins[] = { 161, 162, 163, 164, 165, 166, 167,
+ 168 };
+
+static const unsigned qspi_1_pins[] = { 108, 109 };
+
+static const unsigned smart_card0_fcb_pins[] = { 45 };
+static const unsigned i2s0_1_pins[] = { 45 };
+
+static const unsigned smart_card1_fcb_pins[] = { 51 };
+static const unsigned i2s1_1_pins[] = { 51 };
+
+static const unsigned gpio0_3p3_pins[] = { 176 };
+static const unsigned usb0_oc_pins[] = { 176 };
+
+static const unsigned gpio1_3p3_pins[] = { 177 };
+static const unsigned usb1_oc_pins[] = { 177 };
+
+static const unsigned gpio2_3p3_pins[] = { 178 };
+static const unsigned usb2_oc_pins[] = { 178 };
+
+#define CYGNUS_PIN_GROUP(group_name, off, sh, al) \
+{ \
+ .name = __stringify(group_name) "_grp", \
+ .pins = group_name ## _pins, \
+ .num_pins = ARRAY_SIZE(group_name ## _pins), \
+ .mux = { \
+ .offset = off, \
+ .shift = sh, \
+ .alt = al, \
+ } \
+}
+
+/*
+ * List of Cygnus pin groups
+ */
+static const struct cygnus_pin_group cygnus_pin_groups[] = {
+ CYGNUS_PIN_GROUP(i2s2_0, 0x0, 0, 2),
+ CYGNUS_PIN_GROUP(i2s2_1, 0x0, 4, 2),
+ CYGNUS_PIN_GROUP(i2s2_2, 0x0, 8, 2),
+ CYGNUS_PIN_GROUP(i2s2_3, 0x0, 12, 2),
+ CYGNUS_PIN_GROUP(i2s2_4, 0x0, 16, 2),
+ CYGNUS_PIN_GROUP(pwm4, 0x0, 20, 0),
+ CYGNUS_PIN_GROUP(pwm5, 0x0, 24, 2),
+ CYGNUS_PIN_GROUP(key0, 0x4, 0, 1),
+ CYGNUS_PIN_GROUP(key1, 0x4, 4, 1),
+ CYGNUS_PIN_GROUP(key2, 0x4, 8, 1),
+ CYGNUS_PIN_GROUP(key3, 0x4, 12, 1),
+ CYGNUS_PIN_GROUP(key4, 0x4, 16, 1),
+ CYGNUS_PIN_GROUP(key5, 0x4, 20, 1),
+ CYGNUS_PIN_GROUP(key6, 0x4, 24, 1),
+ CYGNUS_PIN_GROUP(audio_dte0, 0x4, 24, 2),
+ CYGNUS_PIN_GROUP(key7, 0x4, 28, 1),
+ CYGNUS_PIN_GROUP(audio_dte1, 0x4, 28, 2),
+ CYGNUS_PIN_GROUP(key8, 0x8, 0, 1),
+ CYGNUS_PIN_GROUP(key9, 0x8, 4, 1),
+ CYGNUS_PIN_GROUP(key10, 0x8, 8, 1),
+ CYGNUS_PIN_GROUP(key11, 0x8, 12, 1),
+ CYGNUS_PIN_GROUP(key12, 0x8, 16, 1),
+ CYGNUS_PIN_GROUP(key13, 0x8, 20, 1),
+ CYGNUS_PIN_GROUP(key14, 0x8, 24, 1),
+ CYGNUS_PIN_GROUP(audio_dte2, 0x8, 24, 2),
+ CYGNUS_PIN_GROUP(key15, 0x8, 28, 1),
+ CYGNUS_PIN_GROUP(audio_dte3, 0x8, 28, 2),
+ CYGNUS_PIN_GROUP(pwm0, 0xc, 0, 0),
+ CYGNUS_PIN_GROUP(pwm1, 0xc, 4, 0),
+ CYGNUS_PIN_GROUP(pwm2, 0xc, 8, 0),
+ CYGNUS_PIN_GROUP(pwm3, 0xc, 12, 0),
+ CYGNUS_PIN_GROUP(sdio0, 0xc, 16, 0),
+ CYGNUS_PIN_GROUP(smart_card0, 0xc, 20, 0),
+ CYGNUS_PIN_GROUP(i2s0_0, 0xc, 20, 1),
+ CYGNUS_PIN_GROUP(spdif, 0xc, 20, 1),
+ CYGNUS_PIN_GROUP(smart_card1, 0xc, 24, 0),
+ CYGNUS_PIN_GROUP(i2s1_0, 0xc, 24, 1),
+ CYGNUS_PIN_GROUP(spi0, 0x10, 0, 0),
+ CYGNUS_PIN_GROUP(spi1, 0x10, 4, 0),
+ CYGNUS_PIN_GROUP(spi2, 0x10, 8, 0),
+ CYGNUS_PIN_GROUP(spi3, 0x10, 12, 0),
+ CYGNUS_PIN_GROUP(sw_led0_0, 0x10, 12, 2),
+ CYGNUS_PIN_GROUP(d1w, 0x10, 16, 0),
+ CYGNUS_PIN_GROUP(uart4, 0x10, 16, 1),
+ CYGNUS_PIN_GROUP(sw_led2_0, 0x10, 16, 2),
+ CYGNUS_PIN_GROUP(lcd, 0x10, 20, 0),
+ CYGNUS_PIN_GROUP(sram_0, 0x10, 20, 1),
+ CYGNUS_PIN_GROUP(spi5, 0x10, 20, 2),
+ CYGNUS_PIN_GROUP(uart0, 0x14, 0, 0),
+ CYGNUS_PIN_GROUP(sw_led0_1, 0x14, 0, 2),
+ CYGNUS_PIN_GROUP(uart1_dte, 0x14, 4, 0),
+ CYGNUS_PIN_GROUP(uart2, 0x14, 4, 1),
+ CYGNUS_PIN_GROUP(uart1, 0x14, 8, 0),
+ CYGNUS_PIN_GROUP(uart3, 0x14, 12, 0),
+ CYGNUS_PIN_GROUP(qspi_0, 0x14, 16, 0),
+ CYGNUS_PIN_GROUP(nand, 0x14, 20, 0),
+ CYGNUS_PIN_GROUP(sdio0_cd, 0x18, 0, 0),
+ CYGNUS_PIN_GROUP(sdio0_mmc, 0x18, 4, 0),
+ CYGNUS_PIN_GROUP(sdio1_data_0, 0x18, 8, 0),
+ CYGNUS_PIN_GROUP(can0, 0x18, 8, 1),
+ CYGNUS_PIN_GROUP(spi4_0, 0x18, 8, 2),
+ CYGNUS_PIN_GROUP(sdio1_data_1, 0x18, 12, 0),
+ CYGNUS_PIN_GROUP(can1, 0x18, 12, 1),
+ CYGNUS_PIN_GROUP(spi4_1, 0x18, 12, 2),
+ CYGNUS_PIN_GROUP(sdio1_cd, 0x18, 16, 0),
+ CYGNUS_PIN_GROUP(sdio1_led, 0x18, 20, 0),
+ CYGNUS_PIN_GROUP(sw_led2_1, 0x18, 20, 2),
+ CYGNUS_PIN_GROUP(sdio1_mmc, 0x18, 24, 0),
+ CYGNUS_PIN_GROUP(cam_led, 0x1c, 0, 0),
+ CYGNUS_PIN_GROUP(sw_led1, 0x1c, 0, 1),
+ CYGNUS_PIN_GROUP(cam_0, 0x1c, 4, 0),
+ CYGNUS_PIN_GROUP(cam_1, 0x1c, 8, 0),
+ CYGNUS_PIN_GROUP(sram_1, 0x1c, 8, 1),
+ CYGNUS_PIN_GROUP(qspi_1, 0x1c, 12, 0),
+ CYGNUS_PIN_GROUP(bsc1, 0x1c, 16, 0),
+ CYGNUS_PIN_GROUP(pcie_clkreq, 0x1c, 16, 1),
+ CYGNUS_PIN_GROUP(smart_card0_fcb, 0x20, 0, 0),
+ CYGNUS_PIN_GROUP(i2s0_1, 0x20, 0, 1),
+ CYGNUS_PIN_GROUP(smart_card1_fcb, 0x20, 4, 0),
+ CYGNUS_PIN_GROUP(i2s1_1, 0x20, 4, 1),
+ CYGNUS_PIN_GROUP(gpio0_3p3, 0x28, 0, 0),
+ CYGNUS_PIN_GROUP(usb0_oc, 0x28, 0, 1),
+ CYGNUS_PIN_GROUP(gpio1_3p3, 0x28, 4, 0),
+ CYGNUS_PIN_GROUP(usb1_oc, 0x28, 4, 1),
+ CYGNUS_PIN_GROUP(gpio2_3p3, 0x28, 8, 0),
+ CYGNUS_PIN_GROUP(usb2_oc, 0x28, 8, 1),
+};
+
+/*
+ * List of groups supported by functions
+ */
+static const char * const i2s0_grps[] = { "i2s0_0_grp", "i2s0_1_grp" };
+static const char * const i2s1_grps[] = { "i2s1_0_grp", "i2s1_1_grp" };
+static const char * const i2s2_grps[] = { "i2s2_0_grp", "i2s2_1_grp",
+ "i2s2_2_grp", "i2s2_3_grp", "i2s2_4_grp" };
+static const char * const spdif_grps[] = { "spdif_grp" };
+static const char * const pwm0_grps[] = { "pwm0_grp" };
+static const char * const pwm1_grps[] = { "pwm1_grp" };
+static const char * const pwm2_grps[] = { "pwm2_grp" };
+static const char * const pwm3_grps[] = { "pwm3_grp" };
+static const char * const pwm4_grps[] = { "pwm4_grp" };
+static const char * const pwm5_grps[] = { "pwm5_grp" };
+static const char * const key_grps[] = { "key0_grp", "key1_grp", "key2_grp",
+ "key3_grp", "key4_grp", "key5_grp", "key6_grp", "key7_grp", "key8_grp",
+ "key9_grp", "key10_grp", "key11_grp", "key12_grp", "key13_grp",
+ "key14_grp", "key15_grp" };
+static const char * const audio_dte_grps[] = { "audio_dte0_grp",
+ "audio_dte1_grp", "audio_dte2_grp", "audio_dte3_grp" };
+static const char * const smart_card0_grps[] = { "smart_card0_grp",
+ "smart_card0_fcb_grp" };
+static const char * const smart_card1_grps[] = { "smart_card1_grp",
+ "smart_card1_fcb_grp" };
+static const char * const spi0_grps[] = { "spi0_grp" };
+static const char * const spi1_grps[] = { "spi1_grp" };
+static const char * const spi2_grps[] = { "spi2_grp" };
+static const char * const spi3_grps[] = { "spi3_grp" };
+static const char * const spi4_grps[] = { "spi4_0_grp", "spi4_1_grp" };
+static const char * const spi5_grps[] = { "spi5_grp" };
+
+static const char * const sw_led0_grps[] = { "sw_led0_0_grp",
+ "sw_led0_1_grp" };
+static const char * const sw_led1_grps[] = { "sw_led1_grp" };
+static const char * const sw_led2_grps[] = { "sw_led2_0_grp",
+ "sw_led2_1_grp" };
+static const char * const d1w_grps[] = { "d1w_grp" };
+static const char * const lcd_grps[] = { "lcd_grp" };
+static const char * const sram_grps[] = { "sram_0_grp", "sram_1_grp" };
+
+static const char * const uart0_grps[] = { "uart0_grp" };
+static const char * const uart1_grps[] = { "uart1_grp", "uart1_dte_grp" };
+static const char * const uart2_grps[] = { "uart2_grp" };
+static const char * const uart3_grps[] = { "uart3_grp" };
+static const char * const uart4_grps[] = { "uart4_grp" };
+static const char * const qspi_grps[] = { "qspi_0_grp", "qspi_1_grp" };
+static const char * const nand_grps[] = { "nand_grp" };
+static const char * const sdio0_grps[] = { "sdio0_grp", "sdio0_cd_grp",
+ "sdio0_mmc_grp" };
+static const char * const sdio1_grps[] = { "sdio1_data_0_grp",
+ "sdio1_data_1_grp", "sdio1_cd_grp", "sdio1_led_grp", "sdio1_mmc_grp" };
+static const char * const can0_grps[] = { "can0_grp" };
+static const char * const can1_grps[] = { "can1_grp" };
+static const char * const cam_grps[] = { "cam_led_grp", "cam_0_grp",
+ "cam_1_grp" };
+static const char * const bsc1_grps[] = { "bsc1_grp" };
+static const char * const pcie_clkreq_grps[] = { "pcie_clkreq_grp" };
+static const char * const usb0_oc_grps[] = { "usb0_oc_grp" };
+static const char * const usb1_oc_grps[] = { "usb1_oc_grp" };
+static const char * const usb2_oc_grps[] = { "usb2_oc_grp" };
+
+#define CYGNUS_PIN_FUNCTION(func) \
+{ \
+ .name = #func, \
+ .groups = func ## _grps, \
+ .num_groups = ARRAY_SIZE(func ## _grps), \
+}
+
+/*
+ * List of supported functions in Cygnus
+ */
+static const struct cygnus_pin_function cygnus_pin_functions[] = {
+ CYGNUS_PIN_FUNCTION(i2s0),
+ CYGNUS_PIN_FUNCTION(i2s1),
+ CYGNUS_PIN_FUNCTION(i2s2),
+ CYGNUS_PIN_FUNCTION(spdif),
+ CYGNUS_PIN_FUNCTION(pwm0),
+ CYGNUS_PIN_FUNCTION(pwm1),
+ CYGNUS_PIN_FUNCTION(pwm2),
+ CYGNUS_PIN_FUNCTION(pwm3),
+ CYGNUS_PIN_FUNCTION(pwm4),
+ CYGNUS_PIN_FUNCTION(pwm5),
+ CYGNUS_PIN_FUNCTION(key),
+ CYGNUS_PIN_FUNCTION(audio_dte),
+ CYGNUS_PIN_FUNCTION(smart_card0),
+ CYGNUS_PIN_FUNCTION(smart_card1),
+ CYGNUS_PIN_FUNCTION(spi0),
+ CYGNUS_PIN_FUNCTION(spi1),
+ CYGNUS_PIN_FUNCTION(spi2),
+ CYGNUS_PIN_FUNCTION(spi3),
+ CYGNUS_PIN_FUNCTION(spi4),
+ CYGNUS_PIN_FUNCTION(spi5),
+ CYGNUS_PIN_FUNCTION(sw_led0),
+ CYGNUS_PIN_FUNCTION(sw_led1),
+ CYGNUS_PIN_FUNCTION(sw_led2),
+ CYGNUS_PIN_FUNCTION(d1w),
+ CYGNUS_PIN_FUNCTION(lcd),
+ CYGNUS_PIN_FUNCTION(sram),
+ CYGNUS_PIN_FUNCTION(uart0),
+ CYGNUS_PIN_FUNCTION(uart1),
+ CYGNUS_PIN_FUNCTION(uart2),
+ CYGNUS_PIN_FUNCTION(uart3),
+ CYGNUS_PIN_FUNCTION(uart4),
+ CYGNUS_PIN_FUNCTION(qspi),
+ CYGNUS_PIN_FUNCTION(nand),
+ CYGNUS_PIN_FUNCTION(sdio0),
+ CYGNUS_PIN_FUNCTION(sdio1),
+ CYGNUS_PIN_FUNCTION(can0),
+ CYGNUS_PIN_FUNCTION(can1),
+ CYGNUS_PIN_FUNCTION(cam),
+ CYGNUS_PIN_FUNCTION(bsc1),
+ CYGNUS_PIN_FUNCTION(pcie_clkreq),
+ CYGNUS_PIN_FUNCTION(usb0_oc),
+ CYGNUS_PIN_FUNCTION(usb1_oc),
+ CYGNUS_PIN_FUNCTION(usb2_oc),
+};
+
+static int cygnus_get_groups_count(struct pinctrl_dev *pctrl_dev)
+{
+ struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+ return pinctrl->num_groups;
+}
+
+static const char *cygnus_get_group_name(struct pinctrl_dev *pctrl_dev,
+ unsigned selector)
+{
+ struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+ return pinctrl->groups[selector].name;
+}
+
+static int cygnus_get_group_pins(struct pinctrl_dev *pctrl_dev,
+ unsigned selector, const unsigned **pins,
+ unsigned *num_pins)
+{
+ struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+ *pins = pinctrl->groups[selector].pins;
+ *num_pins = pinctrl->groups[selector].num_pins;
+
+ return 0;
+}
+
+static void cygnus_pin_dbg_show(struct pinctrl_dev *pctrl_dev,
+ struct seq_file *s, unsigned offset)
+{
+ seq_printf(s, " %s", dev_name(pctrl_dev->dev));
+}
+
+static bool cygnus_function_is_valid(const char *function_name)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cygnus_pin_functions); i++) {
+ if (!strcmp(cygnus_pin_functions[i].name, function_name))
+ return true;
+ }
+
+ return false;
+}
+
+/*
+ * TODO: Use API from pinctrl framework once "groups" parsing is supported
+ */
+static int cygnus_dt_node_to_map(struct pinctrl_dev *pctrl_dev,
+ struct device_node *np,
+ struct pinctrl_map **map,
+ unsigned *num_maps)
+{
+ int ret, num_groups;
+ unsigned reserved_maps = 0;
+ struct property *prop;
+ const char *group_name, *function_name;
+
+ *map = NULL;
+ *num_maps = 0;
+
+ num_groups = of_property_count_strings(np, "groups");
+ if (num_groups < 0) {
+ dev_err(pctrl_dev->dev, "could not parse property groups\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_string(np, "function", &function_name);
+ if (ret < 0) {
+ dev_err(pctrl_dev->dev, "could not parse property function\n");
+ return -EINVAL;
+ }
+
+ /* check if it's a valid function */
+ if (!cygnus_function_is_valid(function_name)) {
+ dev_warn(pctrl_dev->dev, "invalid function name: %s\n",
+ function_name);
+ }
+
+ ret = pinctrl_utils_reserve_map(pctrl_dev, map, &reserved_maps,
+ num_maps, num_groups);
+ if (ret) {
+ dev_err(pctrl_dev->dev, "unable to reserve map\n");
+ return ret;
+ }
+
+ of_property_for_each_string(np, "groups", prop, group_name) {
+ ret = pinctrl_utils_add_map_mux(pctrl_dev, map,
+ &reserved_maps, num_maps, group_name,
+ function_name);
+ if (ret) {
+ dev_err(pctrl_dev->dev, "can't add map: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct pinctrl_ops cygnus_pinctrl_ops = {
+ .get_groups_count = cygnus_get_groups_count,
+ .get_group_name = cygnus_get_group_name,
+ .get_group_pins = cygnus_get_group_pins,
+ .pin_dbg_show = cygnus_pin_dbg_show,
+ .dt_node_to_map = cygnus_dt_node_to_map,
+ .dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+static int cygnus_get_functions_count(struct pinctrl_dev *pctrl_dev)
+{
+ struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+ return pinctrl->num_functions;
+}
+
+static const char *cygnus_get_function_name(struct pinctrl_dev *pctrl_dev,
+ unsigned selector)
+{
+ struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+ return pinctrl->functions[selector].name;
+}
+
+static int cygnus_get_function_groups(struct pinctrl_dev *pctrl_dev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+ *groups = pinctrl->functions[selector].groups;
+ *num_groups = pinctrl->functions[selector].num_groups;
+
+ return 0;
+}
+
+static int cygnus_pinmux_set(struct cygnus_pinctrl *pinctrl,
+ const struct cygnus_pin_function *func,
+ const struct cygnus_pin_group *grp,
+ struct cygnus_mux_log *mux_log)
+{
+ const struct cygnus_mux *mux = &grp->mux;
+ int i;
+ u32 val, mask = 0x7;
+ unsigned long flags;
+
+ for (i = 0; i < CYGNUS_NUM_IOMUX; i++) {
+ if (mux->offset != mux_log[i].mux.offset ||
+ mux->shift != mux_log[i].mux.shift)
+ continue;
+
+ /* match found if we reach here */
+
+ /* if this is a new configuration, just do it! */
+ if (!mux_log[i].is_configured)
+ break;
+
+ /*
+ * IOMUX has been configured previously and one is trying to
+ * configure it to a different function
+ */
+ if (mux_log[i].mux.alt != mux->alt) {
+ dev_err(pinctrl->dev,
+ "double configuration error detected!\n");
+ dev_err(pinctrl->dev, "func:%s grp:%s\n",
+ func->name, grp->name);
+ return -EINVAL;
+ } else {
+ /*
+ * One tries to configure it to the same function.
+ * Just quit and don't bother
+ */
+ return 0;
+ }
+ }
+
+ mux_log[i].mux.alt = mux->alt;
+ mux_log[i].is_configured = true;
+
+ spin_lock_irqsave(&pinctrl->lock, flags);
+
+ val = readl(pinctrl->base0 + grp->mux.offset);
+ val &= ~(mask << grp->mux.shift);
+ val |= grp->mux.alt << grp->mux.shift;
+ writel(val, pinctrl->base0 + grp->mux.offset);
+
+ spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+ return 0;
+}
+
+static int cygnus_pinmux_set_mux(struct pinctrl_dev *pctrl_dev,
+ unsigned func_select, unsigned grp_select)
+{
+ struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+ const struct cygnus_pin_function *func =
+ &pinctrl->functions[func_select];
+ const struct cygnus_pin_group *grp = &pinctrl->groups[grp_select];
+
+ dev_dbg(pctrl_dev->dev, "func:%u name:%s grp:%u name:%s\n",
+ func_select, func->name, grp_select, grp->name);
+
+ dev_dbg(pctrl_dev->dev, "offset:0x%08x shift:%u alt:%u\n",
+ grp->mux.offset, grp->mux.shift, grp->mux.alt);
+
+ return cygnus_pinmux_set(pinctrl, func, grp, pinctrl->mux_log);
+}
+
+static int cygnus_gpio_request_enable(struct pinctrl_dev *pctrl_dev,
+ struct pinctrl_gpio_range *range,
+ unsigned pin)
+{
+ struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+ const struct cygnus_gpio_mux *mux = pctrl_dev->desc->pins[pin].drv_data;
+ u32 val;
+ unsigned long flags;
+
+ /* not all pins support GPIO pinmux override */
+ if (!mux->is_supported)
+ return -ENOTSUPP;
+
+ spin_lock_irqsave(&pinctrl->lock, flags);
+
+ val = readl(pinctrl->base1 + mux->offset);
+ val |= 0x3 << mux->shift;
+ writel(val, pinctrl->base1 + mux->offset);
+
+ spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+ dev_dbg(pctrl_dev->dev,
+ "gpio request enable pin=%u offset=0x%x shift=%u\n",
+ pin, mux->offset, mux->shift);
+
+ return 0;
+}
+
+static void cygnus_gpio_disable_free(struct pinctrl_dev *pctrl_dev,
+ struct pinctrl_gpio_range *range,
+ unsigned pin)
+{
+ struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+ struct cygnus_gpio_mux *mux = pctrl_dev->desc->pins[pin].drv_data;
+ u32 val;
+ unsigned long flags;
+
+ if (!mux->is_supported)
+ return;
+
+ spin_lock_irqsave(&pinctrl->lock, flags);
+
+ val = readl(pinctrl->base1 + mux->offset);
+ val &= ~(0x3 << mux->shift);
+ writel(val, pinctrl->base1 + mux->offset);
+
+ spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+ dev_err(pctrl_dev->dev,
+ "gpio disable free pin=%u offset=0x%x shift=%u\n",
+ pin, mux->offset, mux->shift);
+}
+
+static const struct pinmux_ops cygnus_pinmux_ops = {
+ .get_functions_count = cygnus_get_functions_count,
+ .get_function_name = cygnus_get_function_name,
+ .get_function_groups = cygnus_get_function_groups,
+ .set_mux = cygnus_pinmux_set_mux,
+ .gpio_request_enable = cygnus_gpio_request_enable,
+ .gpio_disable_free = cygnus_gpio_disable_free,
+};
+
+static struct pinctrl_desc cygnus_pinctrl_desc = {
+ .name = "cygnus-pinmux",
+ .pctlops = &cygnus_pinctrl_ops,
+ .pmxops = &cygnus_pinmux_ops,
+};
+
+static int cygnus_mux_log_init(struct cygnus_pinctrl *pinctrl)
+{
+ struct cygnus_mux_log *log;
+ unsigned int i, j;
+
+ pinctrl->mux_log = devm_kcalloc(pinctrl->dev, CYGNUS_NUM_IOMUX,
+ sizeof(struct cygnus_mux_log),
+ GFP_KERNEL);
+ if (!pinctrl->mux_log)
+ return -ENOMEM;
+
+ log = pinctrl->mux_log;
+ for (i = 0; i < CYGNUS_NUM_IOMUX_REGS; i++) {
+ for (j = 0; j < CYGNUS_NUM_MUX_PER_REG; j++) {
+ log = &pinctrl->mux_log[i * CYGNUS_NUM_MUX_PER_REG
+ + j];
+ log->mux.offset = i * 4;
+ log->mux.shift = j * 4;
+ log->mux.alt = 0;
+ log->is_configured = false;
+ }
+ }
+
+ return 0;
+}
+
+static int cygnus_pinmux_probe(struct platform_device *pdev)
+{
+ struct cygnus_pinctrl *pinctrl;
+ struct resource *res;
+ int i, ret;
+ struct pinctrl_pin_desc *pins;
+ unsigned num_pins = ARRAY_SIZE(cygnus_pins);
+
+ pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL);
+ if (!pinctrl)
+ return -ENOMEM;
+
+ pinctrl->dev = &pdev->dev;
+ platform_set_drvdata(pdev, pinctrl);
+ spin_lock_init(&pinctrl->lock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pinctrl->base0 = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pinctrl->base0)) {
+ dev_err(&pdev->dev, "unable to map I/O space\n");
+ return PTR_ERR(pinctrl->base0);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ pinctrl->base1 = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pinctrl->base1)) {
+ dev_err(&pdev->dev, "unable to map I/O space\n");
+ return PTR_ERR(pinctrl->base1);
+ }
+
+ ret = cygnus_mux_log_init(pinctrl);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to initialize IOMUX log\n");
+ return ret;
+ }
+
+ pins = devm_kcalloc(&pdev->dev, num_pins, sizeof(*pins), GFP_KERNEL);
+ if (!pins)
+ return -ENOMEM;
+
+ for (i = 0; i < num_pins; i++) {
+ pins[i].number = cygnus_pins[i].pin;
+ pins[i].name = cygnus_pins[i].name;
+ pins[i].drv_data = &cygnus_pins[i].gpio_mux;
+ }
+
+ pinctrl->groups = cygnus_pin_groups;
+ pinctrl->num_groups = ARRAY_SIZE(cygnus_pin_groups);
+ pinctrl->functions = cygnus_pin_functions;
+ pinctrl->num_functions = ARRAY_SIZE(cygnus_pin_functions);
+ cygnus_pinctrl_desc.pins = pins;
+ cygnus_pinctrl_desc.npins = num_pins;
+
+ pinctrl->pctl = pinctrl_register(&cygnus_pinctrl_desc, &pdev->dev,
+ pinctrl);
+ if (!pinctrl->pctl) {
+ dev_err(&pdev->dev, "unable to register Cygnus IOMUX pinctrl\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct of_device_id cygnus_pinmux_of_match[] = {
+ { .compatible = "brcm,cygnus-pinmux" },
+ { }
+};
+
+static struct platform_driver cygnus_pinmux_driver = {
+ .driver = {
+ .name = "cygnus-pinmux",
+ .of_match_table = cygnus_pinmux_of_match,
+ .suppress_bind_attrs = true,
+ },
+ .probe = cygnus_pinmux_probe,
+};
+
+static int __init cygnus_pinmux_init(void)
+{
+ return platform_driver_register(&cygnus_pinmux_driver);
+}
+arch_initcall(cygnus_pinmux_init);
+
+MODULE_AUTHOR("Ray Jui <[email protected]>");
+MODULE_DESCRIPTION("Broadcom Cygnus IOMUX driver");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5

2015-02-04 02:09:02

by Ray Jui

[permalink] [raw]
Subject: [PATCH v4 4/4] ARM: dts: enable IOMUX for Broadcom Cygnus

This enables the IOMUX support for Broadcom Cygnus SoC

Signed-off-by: Ray Jui <[email protected]>
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 5126f9e..b014ce5 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -54,6 +54,12 @@

/include/ "bcm-cygnus-clock.dtsi"

+ pinctrl: pinctrl@0x0301d0c8 {
+ compatible = "brcm,cygnus-pinmux";
+ reg = <0x0301d0c8 0x30>,
+ <0x0301d24c 0x2c>;
+ };
+
amba {
#address-cells = <1>;
#size-cells = <1>;
--
1.7.9.5

2015-02-25 19:30:04

by Dmitry Torokhov

[permalink] [raw]
Subject: Re: [PATCH v4 0/4] Add pinctrl support to Broadcom Cygnus SoC

On Tue, Feb 03, 2015 at 06:09:57PM -0800, Ray Jui wrote:
> This patchset contains the initial pinctrl (IOMUX) support for the Broadcom
> Cygnus SoC. The Cygnus IOMUX controller supports group based mux configuration
> and allows certain pins to be muxed to GPIO function individually
>
> Changes from v3:
> - Fix the driver to have more proper use of "const" in various places
> - Other minor improvements
>
> Changes from v2:
> - Consolidate all Broadcom pinctrl drivers into drivers/pinctrl/bcm/*
> - Change the Cygnus IOMUX driver to use standard Linux pinctrl subnode
> properties such as "function" and "groups" for pinmux configuration, instead
> of non-standard properties such as "brcm,function" and "brcm,group"
> - Use real function names like "spi0", "lcd", "key", and etc. instead of HW
> specific mux names like "alt1", "alt2", "alt3", and etc.
> - Add suffix "grp" to all group names
> - Add support to allow individual pins to be muxed to GPIO function through
> subsystem callbacks "gpio_request_enable" and "gpio_disable_free", and get rid
> of all GPIO groups
> - Other minor improvements in the driver
>
> Changes from v1:
> - Fix a typo in device tree binding document

FWIW I tested this series on BCM958305K SVK.

Tested-by: Dmitry Torokhov <[email protected]>

Thanks.

--
Dmitry