2015-02-04 08:12:31

by Nicholas Mc Guire

[permalink] [raw]
Subject: [PATCH 1/3] wireless: orinoco: orinoco_plx use msecs_to_jiffies for conversion

This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).

Signed-off-by: Nicholas Mc Guire <[email protected]>
---

Converting milliseconds to jiffies by "val * HZ / 1000" is technically
ok but msecs_to_jiffies(val) is the cleaner solution and handles all
corner cases correctly. This is a minor API cleanup only.

Patch was compile-tested only for x86_64_defconfig + CONFIG_HERMES=m
CONFIG_PLX_HERMES=m

Patch is against 3.19.0-rc7 (localversion-next is -next-20150203)

drivers/net/wireless/orinoco/orinoco_plx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/orinoco/orinoco_plx.c b/drivers/net/wireless/orinoco/orinoco_plx.c
index b8f6e5c..8b04523 100644
--- a/drivers/net/wireless/orinoco/orinoco_plx.c
+++ b/drivers/net/wireless/orinoco/orinoco_plx.c
@@ -121,7 +121,7 @@ static int orinoco_plx_cor_reset(struct orinoco_private *priv)
mdelay(1);

/* Just in case, wait more until the card is no longer busy */
- timeout = jiffies + (PLX_RESET_TIME * HZ / 1000);
+ timeout = jiffies + msecs_to_jiffies(PLX_RESET_TIME);
reg = hermes_read_regn(hw, CMD);
while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
mdelay(1);
--
1.7.10.4


2015-02-04 08:12:41

by Nicholas Mc Guire

[permalink] [raw]
Subject: [PATCH 2/3] wireless: orinoco: orinoco_pci use msecs_to_jiffies for conversion

This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).

Signed-off-by: Nicholas Mc Guire <[email protected]>
---

Converting milliseconds to jiffies by "val * HZ / 1000" is technically
ok but msecs_to_jiffies(val) is the cleaner solution and handles all
corner cases correctly. This is a minor API cleanup only.

Patch was compile-tested only for x86_64_defconfig + CONFIG_HERMES=m
CONFIG_HERMES_PRISM=y, CONFIG_PCI_HERMES=m

Patch is against 3.19.0-rc7 (localversion-next is -next-20150203)

drivers/net/wireless/orinoco/orinoco_pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/orinoco/orinoco_pci.c b/drivers/net/wireless/orinoco/orinoco_pci.c
index b6bdad6..74219d5 100644
--- a/drivers/net/wireless/orinoco/orinoco_pci.c
+++ b/drivers/net/wireless/orinoco/orinoco_pci.c
@@ -94,7 +94,7 @@ static int orinoco_pci_cor_reset(struct orinoco_private *priv)
mdelay(HERMES_PCI_COR_OFFT);

/* The card is ready when it's no longer busy */
- timeout = jiffies + (HERMES_PCI_COR_BUSYT * HZ / 1000);
+ timeout = jiffies + msecs_to_jiffies(HERMES_PCI_COR_BUSYT);
reg = hermes_read_regn(hw, CMD);
while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
mdelay(1);
--
1.7.10.4

2015-02-04 08:12:46

by Nicholas Mc Guire

[permalink] [raw]
Subject: [PATCH 3/3] wireless: orinoco: orinoco_tmd use msecs_to_jiffies for conversion

This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).

Signed-off-by: Nicholas Mc Guire <[email protected]>
---

Converting milliseconds to jiffies by "val * HZ / 1000" is technically
ok but msecs_to_jiffies(val) is the cleaner solution and handles all
corner cases correctly. This is a minor API cleanup only.

Patch was compile-tested only for x86_64_defconfig + CONFIG_HERMES=m
CONFIG_TMD_HERMES=m

Patch is against 3.19.0-rc7 (localversion-next is -next-20150203)

drivers/net/wireless/orinoco/orinoco_tmd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/orinoco/orinoco_tmd.c b/drivers/net/wireless/orinoco/orinoco_tmd.c
index 79d0e33..20ce569 100644
--- a/drivers/net/wireless/orinoco/orinoco_tmd.c
+++ b/drivers/net/wireless/orinoco/orinoco_tmd.c
@@ -71,7 +71,7 @@ static int orinoco_tmd_cor_reset(struct orinoco_private *priv)
mdelay(1);

/* Just in case, wait more until the card is no longer busy */
- timeout = jiffies + (TMD_RESET_TIME * HZ / 1000);
+ timeout = jiffies + msecs_to_jiffies(TMD_RESET_TIME);
reg = hermes_read_regn(hw, CMD);
while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
mdelay(1);
--
1.7.10.4

2015-02-06 06:46:52

by Kalle Valo

[permalink] [raw]
Subject: Re: [1/3] orinoco: orinoco_plx use msecs_to_jiffies for conversion


> This is only an API consolidation and should make things more readable
> it replaces var * HZ / 1000 by msecs_to_jiffies(var).
>
> Signed-off-by: Nicholas Mc Guire <[email protected]>

Thanks, 3 patches applied to wireless-drivers-next.git:

ab458cc85fa2 orinoco: orinoco_plx use msecs_to_jiffies for conversion
3427da4597ae orinoco: orinoco_pci use msecs_to_jiffies for conversion
c1f1f6663b3c orinoco: orinoco_tmd use msecs_to_jiffies for conversion

Kalle Valo