Add maudio power domain to Exynos 5420 DTSI file so its state could be
tracked. This actually won't power down this domain because the pl330
dmaengine driver (for adma channel) uses IRQ safe runtime PM. Thus the
patch should not introduce any functional change except of visibility of
this domain to the system.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5420.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 6d38f8bfd0e6..2e99a39f7250 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -270,6 +270,11 @@
reg = <0x10044120 0x20>;
};
+ mau_pd: power-domain@100440E0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x100440E0 0x20>;
+ };
+
pinctrl_0: pinctrl@13400000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x13400000 0x1000>;
@@ -328,6 +333,7 @@
#dma-cells = <1>;
#dma-channels = <6>;
#dma-requests = <16>;
+ samsung,power-domain = <&mau_pd>;
};
pdma0: pdma@121A0000 {
@@ -397,6 +403,7 @@
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
status = "disabled";
+ samsung,power-domain = <&mau_pd>;
};
i2s1: i2s@12D60000 {
--
1.9.1
Hello Krzysztof,
On 02/09/2015 01:41 PM, Krzysztof Kozlowski wrote:
> Add maudio power domain to Exynos 5420 DTSI file so its state could be
> tracked. This actually won't power down this domain because the pl330
> dmaengine driver (for adma channel) uses IRQ safe runtime PM. Thus the
> patch should not introduce any functional change except of visibility of
> this domain to the system.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
Your patch looks good to me, I just have two small comments below. With
those changes, feel free to add:
Reviewed-by: Javier Martinez Canillas <[email protected]>
> arch/arm/boot/dts/exynos5420.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index 6d38f8bfd0e6..2e99a39f7250 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -270,6 +270,11 @@
> reg = <0x10044120 0x20>;
> };
>
> + mau_pd: power-domain@100440E0 {
> + compatible = "samsung,exynos4210-pd";
> + reg = <0x100440E0 0x20>;
You also need to add #power-domain-cells = <0> here since "power-domain-cells"
is a required property now that the Exynos PD code has been converted to use
the generic power domains lookup.
> + };
> +
> pinctrl_0: pinctrl@13400000 {
> compatible = "samsung,exynos5420-pinctrl";
> reg = <0x13400000 0x1000>;
> @@ -328,6 +333,7 @@
> #dma-cells = <1>;
> #dma-channels = <6>;
> #dma-requests = <16>;
> + samsung,power-domain = <&mau_pd>;
Same here. Even though "samsung,power-domain" is kept as backward compatible,
"power-domains" should be used instead. In fact Marek sent a patch [0] to get
rid of all the current "samsung,power-domain" properties so it would be good
if you can base on top of that one.
Best regards,
Javier
[0]: http://www.spinics.net/lists/linux-samsung-soc/msg40584.html
On pon, 2015-02-09 at 13:58 +0100, Javier Martinez Canillas wrote:
> Hello Krzysztof,
>
> On 02/09/2015 01:41 PM, Krzysztof Kozlowski wrote:
> > Add maudio power domain to Exynos 5420 DTSI file so its state could be
> > tracked. This actually won't power down this domain because the pl330
> > dmaengine driver (for adma channel) uses IRQ safe runtime PM. Thus the
> > patch should not introduce any functional change except of visibility of
> > this domain to the system.
> >
> > Signed-off-by: Krzysztof Kozlowski <[email protected]>
> > ---
>
> Your patch looks good to me, I just have two small comments below. With
> those changes, feel free to add:
>
> Reviewed-by: Javier Martinez Canillas <[email protected]>
Thanks!
>
> > arch/arm/boot/dts/exynos5420.dtsi | 7 +++++++
> > 1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> > index 6d38f8bfd0e6..2e99a39f7250 100644
> > --- a/arch/arm/boot/dts/exynos5420.dtsi
> > +++ b/arch/arm/boot/dts/exynos5420.dtsi
> > @@ -270,6 +270,11 @@
> > reg = <0x10044120 0x20>;
> > };
> >
> > + mau_pd: power-domain@100440E0 {
> > + compatible = "samsung,exynos4210-pd";
> > + reg = <0x100440E0 0x20>;
>
> You also need to add #power-domain-cells = <0> here since "power-domain-cells"
> is a required property now that the Exynos PD code has been converted to use
> the generic power domains lookup.
Okay
>
> > + };
> > +
> > pinctrl_0: pinctrl@13400000 {
> > compatible = "samsung,exynos5420-pinctrl";
> > reg = <0x13400000 0x1000>;
> > @@ -328,6 +333,7 @@
> > #dma-cells = <1>;
> > #dma-channels = <6>;
> > #dma-requests = <16>;
> > + samsung,power-domain = <&mau_pd>;
>
> Same here. Even though "samsung,power-domain" is kept as backward compatible,
> "power-domains" should be used instead. In fact Marek sent a patch [0] to get
> rid of all the current "samsung,power-domain" properties so it would be good
> if you can base on top of that one.
Right, I rebased this on mid-January next which did not include Marek's
work yet.
Best regards,
Krzysztof
>
> Best regards,
> Javier
>
> [0]: http://www.spinics.net/lists/linux-samsung-soc/msg40584.html