return type of wait_for_completion_timeout is unsigned long not int. The
return variable is renamed to make the timeout condition clearly readable
and the type adjusted to unsigned long.
Signed-off-by: Nicholas Mc Guire <[email protected]>
---
v3: rename the variable to time_left as suggested by Sergei Shtylyov
<[email protected]> so that the timeout condition is
clearly readable.
v2: int ret is an idiom not only a declaration - thus rather than just
changing the type, rename the variable, as suggested by Wolfram Sang
<[email protected]>.
Patch was only compile tested with multi_v7_defconfig
(implies CONFIG_I2C_CADENCE=y)
Patch is against 3.19.0 (localversion-next is -next-20150210)
drivers/i2c/busses/i2c-cadence.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 7d7a14c..2ee78e0 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -475,7 +475,7 @@ static void cdns_i2c_master_reset(struct i2c_adapter *adap)
static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg,
struct i2c_adapter *adap)
{
- int ret;
+ unsigned long time_left;
u32 reg;
id->p_msg = msg;
@@ -501,8 +501,8 @@ static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg,
cdns_i2c_msend(id);
/* Wait for the signal of completion */
- ret = wait_for_completion_timeout(&id->xfer_done, adap->timeout);
- if (!ret) {
+ time_left = wait_for_completion_timeout(&id->xfer_done, adap->timeout);
+ if (time_left == 0) {
cdns_i2c_master_reset(adap);
dev_err(id->adap.dev.parent,
"timeout waiting on completion\n");
--
1.7.10.4