2015-02-23 07:56:00

by Srinivas Kandagatla

Subject: [PATCH 08/12] ARM: DT: apq8064: Add USB OTG support for CM QS-600

From: Nicolas Dechesne <[email protected]>

This patch adds USB OTG support on USB1 for Compulab QS-600 Board.

Signed-off-by: Nicolas Dechesne <[email protected]>
---
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index af2e075..6349f24 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -41,6 +41,11 @@
};
};

+ /* OTG */
+ usb1_phy:phy@12500000 {
+ status = "ok";
+ };
+
usb3_phy:phy@12520000 {
status = "ok";
};
@@ -48,7 +53,16 @@
usb4_phy:phy@12530000 {
status = "ok";
};
-
+
+ gadget1:gadget@12500000 {
+ status = "ok";
+ };
+
+ /* OTG */
+ usb1: usb@12500000 {
+ status = "ok";
+ };
+
usb3: usb@12520000 {
status = "ok";
};
--
1.9.1

2015-02-23 12:02:10

by Igor Grinberg

Subject: Re: [PATCH 08/12] ARM: DT: apq8064: Add USB OTG support for CM QS-600

On 02/23/15 09:55, Srinivas Kandagatla wrote:
> From: Nicolas Dechesne <[email protected]>
>
> This patch adds USB OTG support on USB1 for Compulab QS-600 Board.
>
> Signed-off-by: Nicolas Dechesne <[email protected]>

Acked-by: Igor Grinberg <[email protected]>

> ---
> arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 +++++++++++++++-
> 1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> index af2e075..6349f24 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> @@ -41,6 +41,11 @@
> };
> };
>
> + /* OTG */
> + usb1_phy:phy@12500000 {
> + status = "ok";
> + };
> +
> usb3_phy:phy@12520000 {
> status = "ok";
> };
> @@ -48,7 +53,16 @@
> usb4_phy:phy@12530000 {
> status = "ok";
> };
> -
> +
> + gadget1:gadget@12500000 {
> + status = "ok";
> + };
> +
> + /* OTG */
> + usb1: usb@12500000 {
> + status = "ok";
> + };
> +
> usb3: usb@12520000 {
> status = "ok";
> };
>

--
Regards,
Igor.