From: Matteo Semenzato <[email protected]>
This patch fixes the following error:
Do not use C99 // comments
Signed-off-by: Matteo Semenzato <[email protected]>
---
drivers/staging/fbtft/fb_ssd1331.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/fbtft/fb_ssd1331.c b/drivers/staging/fbtft/fb_ssd1331.c
index da7464f..cdb18b3 100644
--- a/drivers/staging/fbtft/fb_ssd1331.c
+++ b/drivers/staging/fbtft/fb_ssd1331.c
@@ -29,24 +29,24 @@ static int init_display(struct fbtft_par *par)
write_reg(par, 0xae); /* Display Off */
write_reg(par, 0xa0, 0x70 | (par->bgr << 2)); /* Set Colour Depth */
- write_reg(par, 0x72); // RGB colour
+ write_reg(par, 0x72); /* RGB colour */
write_reg(par, 0xa1, 0x00); /* Set Display Start Line */
write_reg(par, 0xa2, 0x00); /* Set Display Offset */
write_reg(par, 0xa4); /* NORMALDISPLAY */
- write_reg(par, 0xa8, 0x3f); // Set multiplex
- write_reg(par, 0xad, 0x8e); // Set master
- // write_reg(par, 0xb0, 0x0b); // Set power mode
- write_reg(par, 0xb1, 0x31); // Precharge
- write_reg(par, 0xb3, 0xf0); // Clock div
- write_reg(par, 0x8a, 0x64); // Precharge A
- write_reg(par, 0x8b, 0x78); // Precharge B
- write_reg(par, 0x8c, 0x64); // Precharge C
- write_reg(par, 0xbb, 0x3a); // Precharge level
- write_reg(par, 0xbe, 0x3e); // vcomh
- write_reg(par, 0x87, 0x06); // Master current
- write_reg(par, 0x81, 0x91); // Contrast A
- write_reg(par, 0x82, 0x50); // Contrast B
- write_reg(par, 0x83, 0x7d); // Contrast C
+ write_reg(par, 0xa8, 0x3f); /* Set multiplex */
+ write_reg(par, 0xad, 0x8e); /* Set master */
+ /* write_reg(par, 0xb0, 0x0b); Set power mode */
+ write_reg(par, 0xb1, 0x31); /* Precharge */
+ write_reg(par, 0xb3, 0xf0); /* Clock div */
+ write_reg(par, 0x8a, 0x64); /* Precharge A */
+ write_reg(par, 0x8b, 0x78); /* Precharge B */
+ write_reg(par, 0x8c, 0x64); /* Precharge C */
+ write_reg(par, 0xbb, 0x3a); /* Precharge level */
+ write_reg(par, 0xbe, 0x3e); /* vcomh */
+ write_reg(par, 0x87, 0x06); /* Master current */
+ write_reg(par, 0x81, 0x91); /* Contrast A */
+ write_reg(par, 0x82, 0x50); /* Contrast B */
+ write_reg(par, 0x83, 0x7d); /* Contrast C */
write_reg(par, 0xaf); /* Set Sleep Mode Display On */
return 0;
--
2.3.0