This is based on v4.1-rc1
------------8<-------------------------------------------
The instance address for uart nodes are incorrect. Correct them.
Signed-off-by: Yingjoe Chen <[email protected]>
---
arch/arm/boot/dts/mt8127.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
index aaa7862..ca3402e 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -107,7 +107,7 @@
<0 0x10216000 0 0x2000>;
};
- uart0: serial@11006000 {
+ uart0: serial@11002000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
@@ -115,7 +115,7 @@
status = "disabled";
};
- uart1: serial@11007000 {
+ uart1: serial@11003000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
@@ -123,7 +123,7 @@
status = "disabled";
};
- uart2: serial@11008000 {
+ uart2: serial@11004000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
@@ -131,7 +131,7 @@
status = "disabled";
};
- uart3: serial@11009000 {
+ uart3: serial@11005000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
--
1.8.1.1.dirty
2015-05-16 9:30 GMT+02:00 Yingjoe Chen <[email protected]>:
>
> This is based on v4.1-rc1
>
> ------------8<-------------------------------------------
> The instance address for uart nodes are incorrect. Correct them.
>
> Signed-off-by: Yingjoe Chen <[email protected]>
> ---
> arch/arm/boot/dts/mt8127.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
Applied, thanks.