Hi,
Changes since v3
================
1. Rebased on current Kukjin's for-next branch:
v4.1-rc3-34-gfcfae6b049cf
Changes since v2
================
1. New patch 8/8: ARM: dts: Use labels for overriding nodes
in exynos5422-odroidxu3
2. To avoid conflicts rebased on my "for-next" branch of
https://github.com/krzk/linux
The branch above contains some patches for Exynos5 boards
applied from LKML.
Changes since v1
================
1. Re-phrased the description (phandle->label). Suggested by Arnd.
Description
===========
The label-based notation reduces possible mistakes when overriding
nodes by child DTSI and board files and reduces duplication
of addresses.
The patchset refactors Exynos5 boards to use labels for overriding nodes.
Tested by comparison of decompiled DTB for each commit.
Best regards,
Krzysztof
Krzysztof Kozlowski (8):
ARM: dts: Add labels to exynos5 nodes
ARM: dts: Use labels for overriding nodes in exynos5250
ARM: dts: Remove duplicated I2C7 nodes in exynos5250-snow
ARM: dts: Use labels for overriding nodes in exynos5420-arndale-octa
ARM: dts: Use labels for overriding nodes in exynos542x
ARM: dts: Use labels for overriding nodes in exynos5420-smdk5420
ARM: dts: Use labels for overriding nodes in exynos5440 boards
ARM: dts: Use labels for overriding nodes in exynos5422-odroidxu3
arch/arm/boot/dts/exynos5.dtsi | 6 +-
arch/arm/boot/dts/exynos5250-snow.dts | 46 +-
arch/arm/boot/dts/exynos5250.dtsi | 82 ++--
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 634 ++++++++++++-------------
arch/arm/boot/dts/exynos5420-peach-pit.dts | 2 +-
arch/arm/boot/dts/exynos5420-smdk5420.dts | 645 +++++++++++++-------------
arch/arm/boot/dts/exynos5420.dtsi | 82 ++--
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 568 +++++++++++------------
arch/arm/boot/dts/exynos5440-sd5v1.dts | 10 +-
arch/arm/boot/dts/exynos5440-ssdk5440.dts | 85 ++--
arch/arm/boot/dts/exynos5440.dtsi | 4 +-
arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 +-
12 files changed, 1082 insertions(+), 1084 deletions(-)
--
2.1.4
Add new labels to certain nodes so they could be easily referenced by
Exynos5 board DTS files.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5.dtsi | 6 +++---
arch/arm/boot/dts/exynos5440.dtsi | 4 ++--
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index a0cc0b6f8f96..110dbd4fb884 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -81,14 +81,14 @@
interrupts = <0 54 0>;
};
- rtc@101E0000 {
+ rtc: rtc@101E0000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x101E0000 0x100>;
interrupts = <0 43 0>, <0 44 0>;
status = "disabled";
};
- fimd@14400000 {
+ fimd: fimd@14400000 {
compatible = "samsung,exynos5250-fimd";
interrupt-parent = <&combiner>;
reg = <0x14400000 0x40000>;
@@ -98,7 +98,7 @@
status = "disabled";
};
- dp-controller@145B0000 {
+ dp: dp-controller@145B0000 {
compatible = "samsung,exynos5-dp";
reg = <0x145B0000 0x1000>;
interrupts = <10 3>;
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 59d9416b3b03..f18b51f2eeaa 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -279,7 +279,7 @@
clock-names = "usbhost";
};
- pcie@290000 {
+ pcie_0: pcie@290000 {
compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
reg = <0x290000 0x1000
0x270000 0x1000
@@ -300,7 +300,7 @@
status = "disabled";
};
- pcie@2a0000 {
+ pcie_1: pcie@2a0000 {
compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
reg = <0x2a0000 0x1000
0x272000 0x1000
--
2.1.4
Usage of labels instead of full paths reduces possible mistakes when
overriding nodes.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5250.dtsi | 82 +++++++++++++++++++--------------------
1 file changed, 41 insertions(+), 41 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 257e2f10525d..916871bb3f05 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -241,13 +241,6 @@
clock-names = "mfc";
};
- rtc: rtc@101E0000 {
- clocks = <&clock CLK_RTC>;
- clock-names = "rtc";
- interrupt-parent = <&pmu_system_controller>;
- status = "disabled";
- };
-
tmu: tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
@@ -276,26 +269,6 @@
};
};
- serial@12C00000 {
- clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- serial@12C10000 {
- clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- serial@12C20000 {
- clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- serial@12C30000 {
- clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
sata: sata@122F0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
@@ -778,20 +751,6 @@
#phy-cells = <0>;
};
- dp: dp-controller@145B0000 {
- power-domains = <&pd_disp1>;
- clocks = <&clock CLK_DP>;
- clock-names = "dp";
- phys = <&dp_phy>;
- phy-names = "dp";
- };
-
- fimd: fimd@14400000 {
- power-domains = <&pd_disp1>;
- clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
- clock-names = "sclk_fimd", "fimd";
- };
-
adc: adc@12D10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
@@ -812,3 +771,44 @@
clock-names = "secss";
};
};
+
+&dp {
+ power-domains = <&pd_disp1>;
+ clocks = <&clock CLK_DP>;
+ clock-names = "dp";
+ phys = <&dp_phy>;
+ phy-names = "dp";
+};
+
+&fimd {
+ power-domains = <&pd_disp1>;
+ clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
+ clock-names = "sclk_fimd", "fimd";
+};
+
+&rtc {
+ clocks = <&clock CLK_RTC>;
+ clock-names = "rtc";
+ interrupt-parent = <&pmu_system_controller>;
+ status = "disabled";
+};
+
+&serial_0 {
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_1 {
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+ clock-names = "uart", "clk_uart_baud0";
+};
--
2.1.4
The i2c_7 node (i2c@12CD0000) with LVDS bridge child node was put in
Exynos5250 Snow DTS file twice. Move the LVDS bridge to proper existing
i2c_7 node.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5250-snow.dts | 46 +++++++++++++++++------------------
1 file changed, 22 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 1eca97ee4bd6..b7f4122df456 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -177,30 +177,6 @@
};
};
- i2c@12CD0000 {
- ptn3460: lvds-bridge@20 {
- compatible = "nxp,ptn3460";
- reg = <0x20>;
- powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
- edid-emulation = <5>;
-
- ports {
- port@0 {
- bridge_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
-
- port@1 {
- bridge_in: endpoint {
- remote-endpoint = <&dp_out>;
- };
- };
- };
- };
- };
-
sound {
compatible = "google,snow-audio-max98095";
@@ -507,6 +483,28 @@
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+ ptn3460: lvds-bridge@20 {
+ compatible = "nxp,ptn3460";
+ reg = <0x20>;
+ powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+ edid-emulation = <5>;
+
+ ports {
+ port@0 {
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+
+ port@1 {
+ bridge_in: endpoint {
+ remote-endpoint = <&dp_out>;
+ };
+ };
+ };
+ };
+
max98095: codec@11 {
compatible = "maxim,max98095";
reg = <0x11>;
--
2.1.4
Usage of labels instead of full paths reduces possible mistakes when
overriding nodes.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 634 +++++++++++++-------------
1 file changed, 317 insertions(+), 317 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 9924b870423f..eeb4ac22cfce 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -39,323 +39,6 @@
};
};
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- };
-
- mmc@12200000 {
- status = "okay";
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
- vmmc-supply = <&ldo10_reg>;
- bus-width = <8>;
- cap-mmc-highspeed;
- };
-
- mmc@12220000 {
- status = "okay";
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
- vmmc-supply = <&ldo19_reg>;
- vqmmc-supply = <&ldo13_reg>;
- bus-width = <4>;
- cap-sd-highspeed;
- };
-
- hsi2c_4: i2c@12CA0000 {
- status = "okay";
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
- s2mps11,buck2-ramp-delay = <12>;
- s2mps11,buck34-ramp-delay = <12>;
- s2mps11,buck16-ramp-delay = <12>;
- s2mps11,buck6-ramp-enable = <1>;
- s2mps11,buck2-ramp-enable = <1>;
- s2mps11,buck3-ramp-enable = <1>;
- s2mps11,buck4-ramp-enable = <1>;
-
- interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&s2mps11_irq>;
-
- s2mps11_osc: clocks {
- #clock-cells = <1>;
- clock-output-names = "s2mps11_ap",
- "s2mps11_cp", "s2mps11_bt";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "PVDD_ALIVE_1V0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "PVDD_APIO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "PVDD_APIO_MMCON_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "PVDD_ADC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "PVDD_PLL_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "PVDD_ANAIP_1V0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "PVDD_ANAIP_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "PVDD_ABB_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "PVDD_USB_3V3";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "PVDD_PRE_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "PVDD_USB_1V0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "PVDD_HSIC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "PVDD_APIO_MMCOFF_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "PVDD_PERI_2V8";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "PVDD_PERI_3V3";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "PVDD_EMMC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "PVDD_TFLASH_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo20_reg: LDO20 {
- regulator-name = "PVDD_BTWIFI_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo21_reg: LDO21 {
- regulator-name = "PVDD_CAM1IO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "PVDD_MIFS_1V1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "PVDD_CAM1_AVDD_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "PVDD_CAM0_AF_2V8";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo27_reg: LDO27 {
- regulator-name = "PVDD_G3DS_1V0";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo28_reg: LDO28 {
- regulator-name = "PVDD_TSP_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo29_reg: LDO29 {
- regulator-name = "PVDD_AUDIO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo31_reg: LDO31 {
- regulator-name = "PVDD_PERI_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo32_reg: LDO32 {
- regulator-name = "PVDD_LCD_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo33_reg: LDO33 {
- regulator-name = "PVDD_CAM0IO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo35_reg: LDO35 {
- regulator-name = "PVDD_CAM0_DVDD_1V2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo38_reg: LDO38 {
- regulator-name = "PVDD_CAM0_AVDD_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "PVDD_MIF_1V1";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "PVDD_INT_1V0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "PVDD_G3D_1V0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "PVDD_LPDDR3_1V2";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "PVDD_KFC_1V0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "VIN_LLDO_1V4";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "VIN_MLDO_2V0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "VIN_HLDO_3V5";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3500000>;
- regulator-always-on;
- };
-
- buck10_reg: BUCK10 {
- regulator-name = "PVDD_EMMCF_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
- };
- };
- };
-
gpio_keys {
compatible = "gpio-keys";
@@ -376,6 +59,323 @@
status = "disabled";
};
+&hsi2c_4 {
+ status = "okay";
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ s2mps11,buck2-ramp-delay = <12>;
+ s2mps11,buck34-ramp-delay = <12>;
+ s2mps11,buck16-ramp-delay = <12>;
+ s2mps11,buck6-ramp-enable = <1>;
+ s2mps11,buck2-ramp-enable = <1>;
+ s2mps11,buck3-ramp-enable = <1>;
+ s2mps11,buck4-ramp-enable = <1>;
+
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps11_irq>;
+
+ s2mps11_osc: clocks {
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "PVDD_ALIVE_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "PVDD_APIO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "PVDD_APIO_MMCON_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "PVDD_ADC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "PVDD_PLL_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "PVDD_ANAIP_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "PVDD_ANAIP_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "PVDD_ABB_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "PVDD_USB_3V3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "PVDD_PRE_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "PVDD_USB_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "PVDD_HSIC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "PVDD_APIO_MMCOFF_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "PVDD_PERI_2V8";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "PVDD_PERI_3V3";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "PVDD_EMMC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "PVDD_TFLASH_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "PVDD_BTWIFI_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "PVDD_CAM1IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "PVDD_MIFS_1V1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "PVDD_CAM1_AVDD_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "PVDD_CAM0_AF_2V8";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "PVDD_G3DS_1V0";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "PVDD_TSP_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo29_reg: LDO29 {
+ regulator-name = "PVDD_AUDIO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "PVDD_PERI_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo32_reg: LDO32 {
+ regulator-name = "PVDD_LCD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "PVDD_CAM0IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "PVDD_CAM0_DVDD_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo38_reg: LDO38 {
+ regulator-name = "PVDD_CAM0_AVDD_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "PVDD_MIF_1V1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "PVDD_INT_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "PVDD_G3D_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "PVDD_LPDDR3_1V2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "PVDD_KFC_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VIN_LLDO_1V4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VIN_MLDO_2V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VIN_HLDO_3V5";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-always-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "PVDD_EMMCF_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+ };
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+ vmmc-supply = <&ldo10_reg>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ vmmc-supply = <&ldo19_reg>;
+ vqmmc-supply = <&ldo13_reg>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+};
+
&pinctrl_0 {
s2mps11_irq: s2mps11-irq {
samsung,pins = "gpx3-2";
--
2.1.4
Usage of labels instead of full paths reduces possible mistakes when
overriding nodes. Additionally remove duplicated serial and uart labels
for serial.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 2 +-
arch/arm/boot/dts/exynos5420.dtsi | 82 +++++++++++++++---------------
arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 +-
3 files changed, 43 insertions(+), 43 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 146e71118a72..8f4d76c5e11c 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -1027,7 +1027,7 @@
};
};
-&uart_3 {
+&serial_3 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index db6cd6302667..487d2176605f 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -328,13 +328,6 @@
interrupts = <0 47 0>;
};
- rtc: rtc@101E0000 {
- clocks = <&clock CLK_RTC>;
- clock-names = "rtc";
- interrupt-parent = <&pmu_system_controller>;
- status = "disabled";
- };
-
amba {
#address-cells = <1>;
#size-cells = <1>;
@@ -505,26 +498,6 @@
status = "disabled";
};
- uart_0: serial@12C00000 {
- clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- uart_1: serial@12C10000 {
- clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- uart_2: serial@12C20000 {
- clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- uart_3: serial@12C30000 {
- clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
pwm: pwm@12dd0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x12dd0000 0x100>;
@@ -540,14 +513,6 @@
#phy-cells = <0>;
};
- dp: dp-controller@145B0000 {
- clocks = <&clock CLK_DP1>;
- clock-names = "dp";
- phys = <&dp_phy>;
- phy-names = "dp";
- power-domains = <&disp_pd>;
- };
-
mipi_phy: video-phy@10040714 {
compatible = "samsung,s5pv210-mipi-video-phy";
syscon = <&pmu_system_controller>;
@@ -567,12 +532,6 @@
status = "disabled";
};
- fimd: fimd@14400000 {
- clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
- clock-names = "sclk_fimd", "fimd";
- power-domains = <&disp_pd>;
- };
-
adc: adc@12D10000 {
compatible = "samsung,exynos-adc-v2";
reg = <0x12D10000 0x100>;
@@ -972,3 +931,44 @@
samsung,pmureg-phandle = <&pmu_system_controller>;
};
};
+
+&dp {
+ clocks = <&clock CLK_DP1>;
+ clock-names = "dp";
+ phys = <&dp_phy>;
+ phy-names = "dp";
+ power-domains = <&disp_pd>;
+};
+
+&fimd {
+ clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
+ clock-names = "sclk_fimd", "fimd";
+ power-domains = <&disp_pd>;
+};
+
+&rtc {
+ clocks = <&clock CLK_RTC>;
+ clock-names = "rtc";
+ interrupt-parent = <&pmu_system_controller>;
+ status = "disabled";
+};
+
+&serial_0 {
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_1 {
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+ clock-names = "uart", "clk_uart_baud0";
+};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 02eb8b15374f..7d5b386b5ae6 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -990,7 +990,7 @@
};
};
-&uart_3 {
+&serial_3 {
status = "okay";
};
--
2.1.4
Usage of labels instead of full paths reduces possible mistakes when
overriding nodes.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5420-smdk5420.dts | 645 +++++++++++++++---------------
1 file changed, 323 insertions(+), 322 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 9103f2381a6d..98871f972c8a 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -64,105 +64,6 @@
};
};
- rtc@101E0000 {
- status = "okay";
- };
-
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- };
-
- mmc@12200000 {
- status = "okay";
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- samsung,dw-mshc-hs400-timing = <0 2>;
- samsung,read-strobe-delay = <90>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8
- &sd0_rclk>;
- bus-width = <8>;
- cap-mmc-highspeed;
- };
-
- mmc@12220000 {
- status = "okay";
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
- bus-width = <4>;
- cap-sd-highspeed;
- };
-
- dp-controller@145B0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
- status = "okay";
- };
-
- fimd@14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing@0 {
- clock-frequency = <50000>;
- hactive = <2560>;
- vactive = <1600>;
- hfront-porch = <48>;
- hback-porch = <80>;
- hsync-len = <32>;
- vback-porch = <16>;
- vfront-porch = <8>;
- vsync-len = <6>;
- };
- };
- };
-
- pinctrl@13400000 {
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl@14000000 {
- usb300_vbus_en: usb300-vbus-en {
- samsung,pins = "gpg0-5";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb301_vbus_en: usb301-vbus-en {
- samsung,pins = "gpg1-4";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
- };
-
- hdmi@14530000 {
- status = "okay";
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- };
-
usb300_vbus_reg: regulator-usb300 {
compatible = "regulator-fixed";
regulator-name = "VBUS0";
@@ -185,238 +86,338 @@
enable-active-high;
};
- phy@12100000 {
- vbus-supply = <&usb300_vbus_reg>;
- };
+};
- phy@12500000 {
- vbus-supply = <&usb301_vbus_reg>;
+&dp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+ status = "okay";
+};
+
+&fimd {
+ status = "okay";
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing@0 {
+ clock-frequency = <50000>;
+ hactive = <2560>;
+ vactive = <1600>;
+ hfront-porch = <48>;
+ hback-porch = <80>;
+ hsync-len = <32>;
+ vback-porch = <16>;
+ vfront-porch = <8>;
+ vsync-len = <6>;
+ };
};
+};
- i2c_2: i2c@12C80000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
+&hdmi {
+ status = "okay";
+ hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+};
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
+&hsi2c_4 {
+ status = "okay";
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ s2mps11,buck2-ramp-delay = <12>;
+ s2mps11,buck34-ramp-delay = <12>;
+ s2mps11,buck16-ramp-delay = <12>;
+ s2mps11,buck6-ramp-enable = <1>;
+ s2mps11,buck2-ramp-enable = <1>;
+ s2mps11,buck3-ramp-enable = <1>;
+ s2mps11,buck4-ramp-enable = <1>;
+
+ s2mps11_osc: clocks {
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
};
- };
- hsi2c_4: i2c@12CA0000 {
- status = "okay";
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
- s2mps11,buck2-ramp-delay = <12>;
- s2mps11,buck34-ramp-delay = <12>;
- s2mps11,buck16-ramp-delay = <12>;
- s2mps11,buck6-ramp-enable = <1>;
- s2mps11,buck2-ramp-enable = <1>;
- s2mps11,buck3-ramp-enable = <1>;
- s2mps11,buck4-ramp-enable = <1>;
-
- s2mps11_osc: clocks {
- #clock-cells = <1>;
- clock-output-names = "s2mps11_ap",
- "s2mps11_cp", "s2mps11_bt";
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "vdd_ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd_ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_ldo6";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "vdd_ldo7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd_ldo8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "vdd_ldo9";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd_ldo10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd_ldo12";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "vdd_ldo1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "vdd_ldo3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "vdd_ldo5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "vdd_ldo6";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "vdd_ldo7";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "vdd_ldo8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "vdd_ldo9";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "vdd_ldo10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "vdd_ldo11";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "vdd_ldo12";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "vdd_ldo13";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "vdd_ldo15";
- regulator-min-microvolt = <3100000>;
- regulator-max-microvolt = <3100000>;
- regulator-always-on;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "vdd_ldo16";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- regulator-always-on;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "tsp_avdd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "vdd_sd";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "tsp_io";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "vdd_mem";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "vdd_kfc";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "vdd_1.0v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "vdd_1.8v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "vdd_2.8v_ldo";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3750000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck10_reg: BUCK10 {
- regulator-name = "vdd_vmem";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ ldo13_reg: LDO13 {
+ regulator-name = "vdd_ldo13";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "vdd_ldo15";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "vdd_ldo16";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "tsp_avdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "tsp_io";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_mem";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_kfc";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "vdd_1.0v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "vdd_1.8v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_2.8v_ldo";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_vmem";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-boot-on;
};
};
};
};
+
+&i2c_2 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ status = "okay";
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ samsung,dw-mshc-hs400-timing = <0 2>;
+ samsung,read-strobe-delay = <90>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8
+ &sd0_rclk>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_2 {
+ usb300_vbus_en: usb300-vbus-en {
+ samsung,pins = "gpg0-5";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb301_vbus_en: usb301-vbus-en {
+ samsung,pins = "gpg1-4";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&usbdrd_phy0 {
+ vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd_phy1 {
+ vbus-supply = <&usb301_vbus_reg>;
+};
--
2.1.4
Usage of labels instead of full paths reduces possible mistakes when
overriding nodes.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5440-sd5v1.dts | 10 ++--
arch/arm/boot/dts/exynos5440-ssdk5440.dts | 85 +++++++++++++++----------------
2 files changed, 47 insertions(+), 48 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
index 268609a42b2c..a98501bab6fc 100644
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
@@ -27,13 +27,13 @@
};
};
- gmac: ethernet@00230000 {
- fixed_phy;
- phy_addr = <1>;
- };
-
spi {
status = "disabled";
};
};
+
+&gmac {
+ fixed_phy;
+ phy_addr = <1>;
+};
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index ff55dac6e219..e4443f4e6572 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -20,59 +20,58 @@
bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
};
- spi_0: spi@D0000 {
-
- flash: w25q128@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "winbond,w25q128";
- spi-max-frequency = <15625000>;
- reg = <0>;
- controller-data {
- samsung,spi-feedback-delay = <0>;
- };
+ fixed-rate-clocks {
+ xtal {
+ compatible = "samsung,clock-xtal";
+ clock-frequency = <50000000>;
+ };
+ };
+};
- partition@00000 {
- label = "BootLoader";
- reg = <0x60000 0x80000>;
- read-only;
- };
+&pcie_0 {
+ reset-gpio = <&pin_ctrl 5 0>;
+ status = "okay";
+};
- partition@e0000 {
- label = "Recovery-Kernel";
- reg = <0xe0000 0x300000>;
- read-only;
- };
+&pcie_1 {
+ reset-gpio = <&pin_ctrl 22 0>;
+ status = "okay";
+};
- partition@3e0000 {
- label = "CRAM-FS";
- reg = <0x3e0000 0x700000>;
- read-only;
- };
+&spi_0 {
+ flash: w25q128@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128";
+ spi-max-frequency = <15625000>;
+ reg = <0>;
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
+ };
- partition@ae0000 {
- label = "User-Data";
- reg = <0xae0000 0x520000>;
- };
+ partition@00000 {
+ label = "BootLoader";
+ reg = <0x60000 0x80000>;
+ read-only;
+ };
+ partition@e0000 {
+ label = "Recovery-Kernel";
+ reg = <0xe0000 0x300000>;
+ read-only;
};
- };
+ partition@3e0000 {
+ label = "CRAM-FS";
+ reg = <0x3e0000 0x700000>;
+ read-only;
+ };
- fixed-rate-clocks {
- xtal {
- compatible = "samsung,clock-xtal";
- clock-frequency = <50000000>;
+ partition@ae0000 {
+ label = "User-Data";
+ reg = <0xae0000 0x520000>;
};
- };
- pcie@290000 {
- reset-gpio = <&pin_ctrl 5 0>;
- status = "okay";
};
- pcie@2a0000 {
- reset-gpio = <&pin_ctrl 22 0>;
- status = "okay";
- };
};
--
2.1.4
Usage of labels instead of full paths reduces possible mistakes when
overriding nodes.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 568 ++++++++++++++---------------
1 file changed, 284 insertions(+), 284 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 6403757011ba..f3f753183f48 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -28,10 +28,6 @@
linux,stdout-path = &serial_2;
};
- fimd@14400000 {
- status = "okay";
- };
-
firmware@02073000 {
compatible = "samsung,secure-firmware";
reg = <0x02073000 0x1000>;
@@ -44,229 +40,6 @@
};
};
- hsi2c_4: i2c@12CA0000 {
- status = "okay";
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
- s2mps11,buck2-ramp-delay = <12>;
- s2mps11,buck34-ramp-delay = <12>;
- s2mps11,buck16-ramp-delay = <12>;
- s2mps11,buck6-ramp-enable = <1>;
- s2mps11,buck2-ramp-enable = <1>;
- s2mps11,buck3-ramp-enable = <1>;
- s2mps11,buck4-ramp-enable = <1>;
-
- s2mps11_osc: clocks {
- #clock-cells = <1>;
- clock-output-names = "s2mps11_ap",
- "s2mps11_cp", "s2mps11_bt";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "vdd_ldo1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "vdd_ldo3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "vdd_ldo5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "vdd_ldo6";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "vdd_ldo7";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "vdd_ldo8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "vdd_ldo9";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "vdd_ldo10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "vdd_ldo11";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "vdd_ldo12";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "vdd_ldo13";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "vdd_ldo15";
- regulator-min-microvolt = <3100000>;
- regulator-max-microvolt = <3100000>;
- regulator-always-on;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "vdd_ldo16";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- regulator-always-on;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "tsp_avdd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "vdd_sd";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "tsp_io";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "vdd_ldo26";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "vdd_mem";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "vdd_kfc";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "vdd_1.0v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "vdd_1.8v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "vdd_2.8v_ldo";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3750000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck10_reg: BUCK10 {
- regulator-name = "vdd_vmem";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
- };
-
emmc_pwrseq: pwrseq {
pinctrl-0 = <&emmc_nrst_pin>;
pinctrl-names = "default";
@@ -274,17 +47,6 @@
reset-gpios = <&gpd1 0 1>;
};
- i2c_2: i2c@12C80000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
-
leds {
compatible = "gpio-leds";
heartbeat {
@@ -351,6 +113,245 @@
<19200000>;
};
+&fimd {
+ status = "okay";
+};
+
+
+&hdmi {
+ status = "okay";
+ hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+
+ vdd_osc-supply = <&ldo7_reg>;
+ vdd_pll-supply = <&ldo6_reg>;
+ vdd-supply = <&ldo6_reg>;
+};
+
+&hsi2c_4 {
+ status = "okay";
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ s2mps11,buck2-ramp-delay = <12>;
+ s2mps11,buck34-ramp-delay = <12>;
+ s2mps11,buck16-ramp-delay = <12>;
+ s2mps11,buck6-ramp-enable = <1>;
+ s2mps11,buck2-ramp-enable = <1>;
+ s2mps11,buck3-ramp-enable = <1>;
+ s2mps11,buck4-ramp-enable = <1>;
+
+ s2mps11_osc: clocks {
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "vdd_ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd_ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_ldo6";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "vdd_ldo7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd_ldo8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "vdd_ldo9";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd_ldo10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd_ldo12";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "vdd_ldo13";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "vdd_ldo15";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "vdd_ldo16";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "tsp_avdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "tsp_io";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "vdd_ldo26";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_mem";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_kfc";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "vdd_1.0v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "vdd_1.8v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_2.8v_ldo";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_vmem";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
&hsi2c_5 {
status = "okay";
max98090: max98090@10 {
@@ -364,19 +365,50 @@
};
};
-&i2s0 {
+&i2c_0 {
status = "okay";
+ /* A15 cluster: VDD_ARM */
+ ina231@40 {
+ compatible = "ti,ina231";
+ reg = <0x40>;
+ shunt-resistor = <10000>;
+ };
+
+ /* memory: VDD_MEM */
+ ina231@41 {
+ compatible = "ti,ina231";
+ reg = <0x41>;
+ shunt-resistor = <10000>;
+ };
+
+ /* GPU: VDD_G3D */
+ ina231@44 {
+ compatible = "ti,ina231";
+ reg = <0x44>;
+ shunt-resistor = <10000>;
+ };
+
+ /* A7 cluster: VDD_KFC */
+ ina231@45 {
+ compatible = "ti,ina231";
+ reg = <0x45>;
+ shunt-resistor = <10000>;
+ };
};
-&hdmi {
+&i2c_2 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
status = "okay";
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- vdd_osc-supply = <&ldo7_reg>;
- vdd_pll-supply = <&ldo6_reg>;
- vdd-supply = <&ldo6_reg>;
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
};
&mfc {
@@ -432,6 +464,12 @@
};
};
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
&usbdrd_dwc3_0 {
dr_mode = "host";
};
@@ -439,41 +477,3 @@
&usbdrd_dwc3_1 {
dr_mode = "otg";
};
-
-&i2c_0 {
- status = "okay";
-
- /* A15 cluster: VDD_ARM */
- ina231@40 {
- compatible = "ti,ina231";
- reg = <0x40>;
- shunt-resistor = <10000>;
- };
-
- /* memory: VDD_MEM */
- ina231@41 {
- compatible = "ti,ina231";
- reg = <0x41>;
- shunt-resistor = <10000>;
- };
-
- /* GPU: VDD_G3D */
- ina231@44 {
- compatible = "ti,ina231";
- reg = <0x44>;
- shunt-resistor = <10000>;
- };
-
- /* A7 cluster: VDD_KFC */
- ina231@45 {
- compatible = "ti,ina231";
- reg = <0x45>;
- shunt-resistor = <10000>;
- };
-};
-
-&rtc {
- status = "okay";
- clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
- clock-names = "rtc", "rtc_src";
-};
--
2.1.4
On 05/17/15 17:26, Krzysztof Kozlowski wrote:
> Hi,
>
>
> Changes since v3
> ================
> 1. Rebased on current Kukjin's for-next branch:
> v4.1-rc3-34-gfcfae6b049cf
>
> Changes since v2
> ================
> 1. New patch 8/8: ARM: dts: Use labels for overriding nodes
> in exynos5422-odroidxu3
> 2. To avoid conflicts rebased on my "for-next" branch of
> https://github.com/krzk/linux
> The branch above contains some patches for Exynos5 boards
> applied from LKML.
>
> Changes since v1
> ================
> 1. Re-phrased the description (phandle->label). Suggested by Arnd.
>
>
> Description
> ===========
> The label-based notation reduces possible mistakes when overriding
> nodes by child DTSI and board files and reduces duplication
> of addresses.
>
> The patchset refactors Exynos5 boards to use labels for overriding nodes.
>
> Tested by comparison of decompiled DTB for each commit.
>
Same, will sort out.
Thanks,
Kukjin