Add new labels to certain nodes on S3C2416 so they could be easily
referenced by board DTS files.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/s3c2416.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index 30b8f7e47454..a5184ff56933 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -17,7 +17,7 @@
compatible = "samsung,s3c2416";
aliases {
- serial3 = &uart3;
+ serial3 = &uart_3;
};
cpus {
@@ -48,7 +48,7 @@
clock-names = "timers";
};
- serial@50000000 {
+ uart_0: serial@50000000 {
compatible = "samsung,s3c2440-uart";
clock-names = "uart", "clk_uart_baud2",
"clk_uart_baud3";
@@ -56,7 +56,7 @@
<&clocks SCLK_UART>;
};
- serial@50004000 {
+ uart_1: serial@50004000 {
compatible = "samsung,s3c2440-uart";
clock-names = "uart", "clk_uart_baud2",
"clk_uart_baud3";
@@ -64,7 +64,7 @@
<&clocks SCLK_UART>;
};
- serial@50008000 {
+ uart_2: serial@50008000 {
compatible = "samsung,s3c2440-uart";
clock-names = "uart", "clk_uart_baud2",
"clk_uart_baud3";
@@ -72,7 +72,7 @@
<&clocks SCLK_UART>;
};
- uart3: serial@5000C000 {
+ uart_3: serial@5000C000 {
compatible = "samsung,s3c2440-uart";
reg = <0x5000C000 0x4000>;
interrupts = <1 18 24 4>, <1 18 25 4>;
@@ -83,7 +83,7 @@
status = "disabled";
};
- sdhci@4AC00000 {
+ sdhci_1: sdhci@4AC00000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x4AC00000 0x100>;
interrupts = <0 0 21 3>;
@@ -94,7 +94,7 @@
status = "disabled";
};
- sdhci@4A800000 {
+ sdhci_0: sdhci@4A800000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x4A800000 0x100>;
interrupts = <0 0 20 3>;
@@ -105,13 +105,13 @@
status = "disabled";
};
- watchdog@53000000 {
+ watchdog: watchdog@53000000 {
interrupts = <1 9 27 3>;
clocks = <&clocks PCLK_WDT>;
clock-names = "watchdog";
};
- rtc@57000000 {
+ rtc: rtc@57000000 {
compatible = "samsung,s3c2416-rtc";
clocks = <&clocks PCLK_RTC>;
clock-names = "rtc";
--
2.1.4
Usage of labels instead of full paths reduces possible mistakes when
overriding nodes.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/s3c2416-smdk2416.dts | 86 +++++++++++++++++-----------------
1 file changed, 43 insertions(+), 43 deletions(-)
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index ea92fd69529a..f257926c13b7 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -31,55 +31,55 @@
#clock-cells = <0>;
};
};
+};
- serial@50000000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
- };
+&rtc {
+ status = "okay";
+};
- serial@50004000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
- };
+&sdhci_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
+ <&sd1_bus1>, <&sd1_bus4>;
+ bus-width = <4>;
+ broken-cd;
+ status = "okay";
+};
- serial@50008000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_data>;
- };
+&sdhci_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
+ <&sd0_bus1>, <&sd0_bus4>;
+ bus-width = <4>;
+ cd-gpios = <&gpf 1 0>;
+ cd-inverted;
+ status = "okay";
+};
- serial@5000C000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_data>;
- };
+&uart_0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+};
- watchdog@53000000 {
- status = "okay";
- };
+&uart_1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
+};
- rtc@57000000 {
- status = "okay";
- };
+&uart_2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_data>;
+};
- sdhci@4AC00000 {
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
- <&sd0_bus1>, <&sd0_bus4>;
- bus-width = <4>;
- cd-gpios = <&gpf 1 0>;
- cd-inverted;
- status = "okay";
- };
+&uart_3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_data>;
+};
- sdhci@4A800000 {
- pinctrl-names = "default";
- pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
- <&sd1_bus1>, <&sd1_bus4>;
- bus-width = <4>;
- broken-cd;
- status = "okay";
- };
+&watchdog {
+ status = "okay";
};
--
2.1.4