Following patches add configuration nodes for SPI, I2C, USB and SDHC devices
found in msm8916 and related pinctrl definitions. Also several GPIO have been
incorrectly assigned and are fixed now. LED control devices for apq 8016-sbc
board are added.
Regards,
Ivan
Ivan T. Ivanov (6):
arm64: dts: qcom: Extend msm8916 pinctrl device coverage
arm64: dts: qcom: Add msm8916 BLSP device nodes
arm64: dts: qcom: Add msm8916 USB configuration nodes
arm64: dts: qcom: apq8016-sbc: Don't hog client driver pins
arm64: dts: qcom: Fix apq8016-sbc board USB related pin definitions
arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes
Srinivas Kandagatla (1):
arm64: dts: qcom: Add msm8916 sdhci configuration nodes
.../arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi | 34 +-
arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi | 14 +-
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 51 +++
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 430 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 227 +++++++++--
5 files changed, 708 insertions(+), 48 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
--
1.9.1
Create separate file for MSM8916 pinctrl default/sleep pins state
definitions. Move in UART2 states and add SPI, I2C and SDC configurations.
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Signed-off-by: Ivan T. Ivanov <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 430 +++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 26 +-
2 files changed, 432 insertions(+), 24 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
new file mode 100644
index 0000000..5689568
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -0,0 +1,430 @@
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&msmgpio {
+
+ blsp1_uart2_default: blsp1_uart2_default {
+ pinmux {
+ function = "blsp_uart2";
+ pins = "gpio4", "gpio5";
+ };
+ pinconf {
+ pins = "gpio4", "gpio5";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ blsp1_uart2_sleep: blsp1_uart2_sleep {
+ pinmux {
+ function = "blsp_uart2";
+ pins = "gpio4", "gpio5";
+ };
+ pinconf {
+ pins = "gpio4", "gpio5";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi1_default: spi1_default {
+ pinmux {
+ function = "blsp_spi1";
+ pins = "gpio0", "gpio1", "gpio3";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio2";
+ };
+ pinconf {
+ pins = "gpio0", "gpio1", "gpio3";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio2";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi1_sleep: spi1_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ };
+ pinconf {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi2_default: spi2_default {
+ pinmux {
+ function = "blsp_spi2";
+ pins = "gpio4", "gpio5", "gpio7";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio6";
+ };
+ pinconf {
+ pins = "gpio4", "gpio5", "gpio6", "gpio7";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio6";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi2_sleep: spi2_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio4", "gpio5", "gpio6", "gpio7";
+ };
+ pinconf {
+ pins = "gpio4", "gpio5", "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi3_default: spi3_default {
+ pinmux {
+ function = "blsp_spi3";
+ pins = "gpio8", "gpio9", "gpio11";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio10";
+ };
+ pinconf {
+ pins = "gpio8", "gpio9", "gpio10", "gpio11";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio10";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi3_sleep: spi3_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio8", "gpio9", "gpio10", "gpio11";
+ };
+ pinconf {
+ pins = "gpio8", "gpio9", "gpio10", "gpio11";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi4_default: spi4_default {
+ pinmux {
+ function = "blsp_spi4";
+ pins = "gpio12", "gpio13", "gpio15";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio14";
+ };
+ pinconf {
+ pins = "gpio12", "gpio13", "gpio14", "gpio15";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio14";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi4_sleep: spi4_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio12", "gpio13", "gpio14", "gpio15";
+ };
+ pinconf {
+ pins = "gpio12", "gpio13", "gpio14", "gpio15";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi5_default: spi5_default {
+ pinmux {
+ function = "blsp_spi5";
+ pins = "gpio16", "gpio17", "gpio19";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio18";
+ };
+ pinconf {
+ pins = "gpio16", "gpio17", "gpio18", "gpio19";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio18";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi5_sleep: spi5_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio16", "gpio17", "gpio18", "gpio19";
+ };
+ pinconf {
+ pins = "gpio16", "gpio17", "gpio18", "gpio19";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi6_default: spi6_default {
+ pinmux {
+ function = "blsp_spi6";
+ pins = "gpio20", "gpio21", "gpio23";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio22";
+ };
+ pinconf {
+ pins = "gpio20", "gpio21", "gpio22", "gpio23";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio22";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spi6_sleep: spi6_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio20", "gpio21", "gpio22", "gpio23";
+ };
+ pinconf {
+ pins = "gpio20", "gpio21", "gpio22", "gpio23";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ i2c4_default: i2c4_default {
+ pinmux {
+ function = "blsp_i2c4";
+ pins = "gpio14", "gpio15";
+ };
+ pinconf {
+ pins = "gpio14", "gpio15";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ i2c4_sleep: i2c4_sleep {
+ pinmux {
+ function = "blsp_i2c4";
+ pins = "gpio14", "gpio15";
+ };
+ pinconf {
+ pins = "gpio14", "gpio15";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ sdhc2_cd_pin {
+ sdc2_cd_on: cd_on {
+ pinmux {
+ function = "gpio";
+ pins = "gpio38";
+ };
+ pinconf {
+ pins = "gpio38";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ sdc2_cd_off: cd_off {
+ pinmux {
+ function = "gpio";
+ pins = "gpio38";
+ };
+ pinconf {
+ pins = "gpio38";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+ };
+
+ pmx_sdc1_clk {
+ sdc1_clk_on: clk_on {
+ pinmux {
+ pins = "sdc1_clk";
+ };
+ pinconf {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+ sdc1_clk_off: clk_off {
+ pinmux {
+ pins = "sdc1_clk";
+ };
+ pinconf {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ pmx_sdc1_cmd {
+ sdc1_cmd_on: cmd_on {
+ pinmux {
+ pins = "sdc1_cmd";
+ };
+ pinconf {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+ sdc1_cmd_off: cmd_off {
+ pinmux {
+ pins = "sdc1_cmd";
+ };
+ pinconf {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ pmx_sdc1_data {
+ sdc1_data_on: data_on {
+ pinmux {
+ pins = "sdc1_data";
+ };
+ pinconf {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+ sdc1_data_off: data_off {
+ pinmux {
+ pins = "sdc1_data";
+ };
+ pinconf {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ pmx_sdc2_clk {
+ sdc2_clk_on: clk_on {
+ pinmux {
+ pins = "sdc2_clk";
+ };
+ pinconf {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+ sdc2_clk_off: clk_off {
+ pinmux {
+ pins = "sdc2_clk";
+ };
+ pinconf {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ pmx_sdc2_cmd {
+ sdc2_cmd_on: cmd_on {
+ pinmux {
+ pins = "sdc2_cmd";
+ };
+ pinconf {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+ sdc2_cmd_off: cmd_off {
+ pinmux {
+ pins = "sdc2_cmd";
+ };
+ pinconf {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ pmx_sdc2_data {
+ sdc2_data_on: data_on {
+ pinmux {
+ pins = "sdc2_data";
+ };
+ pinconf {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+ sdc2_data_off: data_off {
+ pinmux {
+ pins = "sdc2_data";
+ };
+ pinconf {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 0f49ebd..9ab9a92 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -90,30 +90,6 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
-
- blsp1_uart2_default: blsp1_uart2_default {
- pinmux {
- function = "blsp_uart2";
- pins = "gpio4", "gpio5";
- };
- pinconf {
- pins = "gpio4", "gpio5";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp1_uart2_sleep: blsp1_uart2_sleep {
- pinmux {
- function = "blsp_uart2";
- pins = "gpio4", "gpio5";
- };
- pinconf {
- pins = "gpio4", "gpio5";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
};
gcc: qcom,gcc@1800000 {
@@ -217,3 +193,5 @@
};
};
};
+
+#include "msm8916-pins.dtsi"
--
1.9.1
Add device nodes for SPI1, SPI2, SPI3, I2C4, SPI5, SPI6 and
BAM(DMA) engine connected to them.
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Ivan T. Ivanov <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 128 ++++++++++++++++++++++++++++++++++
1 file changed, 128 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9ab9a92..6681c65 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -108,6 +108,134 @@
status = "disabled";
};
+ blsp_dma: dma@7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07884000 0x23000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi1: spi@78b5000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b5000 0x600>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 5>, <&blsp_dma 4>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi1_default>;
+ pinctrl-1 = <&spi1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi2: spi@78b6000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b6000 0x600>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 7>, <&blsp_dma 6>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi2_default>;
+ pinctrl-1 = <&spi2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi3: spi@78b7000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b7000 0x600>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 9>, <&blsp_dma 8>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi3_default>;
+ pinctrl-1 = <&spi3_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi4: spi@78b8000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b8000 0x600>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 11>, <&blsp_dma 10>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi4_default>;
+ pinctrl-1 = <&spi4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi5: spi@78b9000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b9000 0x600>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 13>, <&blsp_dma 12>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi5_default>;
+ pinctrl-1 = <&spi5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi6: spi@78ba000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078ba000 0x600>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 15>, <&blsp_dma 14>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi6_default>;
+ pinctrl-1 = <&spi6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c4: i2c@78b8000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78b8000 0x1000>;
+ interrupts = <GIC_SPI 98 0>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c4_default>;
+ pinctrl-1 = <&i2c4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
--
1.9.1
From: Srinivas Kandagatla <[email protected]>
Add sdhci1 and sdhci2 device configuration nodes.
Signed-off-by: Srinivas Kandagatla <[email protected]>
Signed-off-by: Ivan T. Ivanov <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 34 +++++++++++++++++++++++++++++++++-
1 file changed, 33 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 6681c65..9ff0eb4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -24,7 +24,10 @@
#address-cells = <2>;
#size-cells = <2>;
- aliases { };
+ aliases {
+ sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+ sdhc2 = &sdhc_2; /* SDC2 SD card slot */
+ };
chosen { };
@@ -236,6 +239,35 @@
status = "disabled";
};
+ sdhc_1: sdhci@07824000 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x07824900 0x11c>, <0x07824000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <0 123 0>, <0 138 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>;
+ clock-names = "core", "iface";
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+ };
+
+ sdhc_2: sdhci@07864000 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <0 125 0>, <0 221 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+ <&gcc GCC_SDCC2_AHB_CLK>;
+ clock-names = "core", "iface";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
--
1.9.1
Add Host, Device and OTG configuration nodes.
Signed-off-by: Ivan T. Ivanov <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 39 +++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9ff0eb4..5911de0 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -268,6 +268,45 @@
status = "disabled";
};
+ usb_dev: usb@78d9000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x78d9000 0x400>;
+ dr_mode = "peripheral";
+ interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+ usb-phy = <&usb_otg>;
+ status = "disabled";
+ };
+
+ usb_host: ehci@78d9000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x78d9000 0x400>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+ usb-phy = <&usb_otg>;
+ status = "disabled";
+ };
+
+ usb_otg: phy@78d9000 {
+ compatible = "qcom,usb-otg-snps";
+ reg = <0x78d9000 0x400>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,
+ <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,vdd-levels = <1 5 7>;
+ qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
+ dr_mode = "peripheral";
+ qcom,otg-control = <2>; // PMIC
+
+ clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+ <&gcc GCC_USB_HS_SYSTEM_CLK>,
+ <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "iface", "core", "sleep";
+
+ resets = <&gcc GCC_USB2A_PHY_BCR>,
+ <&gcc GCC_USB_HS_BCR>;
+ reset-names = "phy", "link";
+ status = "disabled";
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
--
1.9.1
Hogging pins from pinctrl driver prevents client drivers
to probe.
Signed-off-by: Ivan T. Ivanov <[email protected]>
---
arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi | 3 ---
arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi | 3 ---
2 files changed, 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
index 535532b..37ca2ed 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -2,9 +2,6 @@
&pm8916_gpios {
- pinctrl-names = "default";
- pinctrl-0 = <&pm8916_gpios_default>;
-
pm8916_gpios_default: default {
usb_hub_reset_pm {
pins = "gpio1";
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
index 5f7023f..27087cf 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
@@ -3,9 +3,6 @@
&msmgpio {
- pinctrl-names = "default";
- pinctrl-0 = <&soc_gpios_default>;
-
soc_gpios_default: default {
usr_led_1_ctrl_default: usr_led_1_ctrl_default {
pins = "gpio21";
--
1.9.1
USB2513B HUB reset line is connected to PMIC GPIO3 not GPIO1.
Fix TC7USB40MU Dual SPDT Switch select input line control, which is
connected to PMIC GPIO4 not GPIO2 and disable the pin. It is not used
for now.
Remove user LEDs definitions, because they clash with above numbers.
Signed-off-by: Ivan T. Ivanov <[email protected]>
---
.../arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi | 22 ++++++++--------------
1 file changed, 8 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
index 37ca2ed..b568c49 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -2,26 +2,20 @@
&pm8916_gpios {
- pm8916_gpios_default: default {
- usb_hub_reset_pm {
- pins = "gpio1";
- function = PMIC_GPIO_FUNC_NORMAL;
- output-low;
- };
- usb_sw_sel_pm {
- pins = "gpio2";
- function = PMIC_GPIO_FUNC_NORMAL;
- input-disable;
- };
- usr_led_3_ctrl {
+ usb_hub_reset_pm: usb_hub_reset_pm {
+ pinconf {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
- usr_led_4_ctrl {
+ };
+
+ usb_sw_sel_pm: usb_sw_sel_pm {
+ pinconf {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
- output-low;
+ power-source = <PM8916_GPIO_VPH>;
+ input-disable;
};
};
};
--
1.9.1
APQ8016 SBC board have 6 user controllable LED's.
Add following devices:
LED1 green LED triggered by system heartbeat.
LED2 green LED triggered by access to eMMC device.
LED3 green LED triggered by access to SD card.
LED4 green LED no trigger assigned.
LED5 yellow LED triggered by access to WLAN.
LED6 blue LED triggered by access to Bluetooth.
Signed-off-by: Ivan T. Ivanov <[email protected]>
---
.../arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi | 19 ++++++++
arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi | 11 ++---
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 51 ++++++++++++++++++++++
3 files changed, 73 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
index b568c49..e03c11d 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -18,4 +18,23 @@
input-disable;
};
};
+
+ pm8916_gpios_leds: pm8916_gpios_leds {
+ pinconf {
+ pins = "gpio1", "gpio2";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ };
+};
+
+&pm8916_mpps {
+
+ pm8916_mpps_leds: pm8916_mpps_leds {
+ pinconf {
+ pins = "mpp2", "mpp3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
index 27087cf..cbeee0b 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
@@ -3,14 +3,9 @@
&msmgpio {
- soc_gpios_default: default {
- usr_led_1_ctrl_default: usr_led_1_ctrl_default {
- pins = "gpio21";
- function = "gpio";
- output-low;
- };
- usr_led_2_ctrl_default: usr_led_2_ctrl_default {
- pins = "gpio120";
+ msmgpio_leds: msmgpio_leds {
+ pinconf {
+ pins = "gpio21", "gpio120";
function = "gpio";
output-low;
};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 98abece..66804ff 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -32,5 +32,56 @@
pinctrl-0 = <&blsp1_uart2_default>;
pinctrl-1 = <&blsp1_uart2_sleep>;
};
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&msmgpio_leds>,
+ <&pm8916_gpios_leds>,
+ <&pm8916_mpps_leds>;
+
+ compatible = "gpio-leds";
+
+ led@1 {
+ label = "apq8016-sbc:green:user1";
+ gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "apq8016-sbc:green:user2";
+ gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "apq8016-sbc:green:user3";
+ gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ led@4 {
+ label = "apq8016-sbc:green:user4";
+ gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ };
+
+ led@5 {
+ label = "apq8016-sbc:yellow:wlan";
+ gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "wlan";
+ default-state = "off";
+ };
+
+ led@6 {
+ label = "apq8016-sbc:blue:bt";
+ gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "bt";
+ default-state = "off";
+ };
+ };
};
};
--
1.9.1