2015-06-30 06:17:22

by Kim, Milo

[permalink] [raw]
Subject: [PATCH] backlight: lp855x: use private data for regulator control

LP855x backlight device can be enabled by external VDD input.
The 'supply' data is used for this purpose.
It's kind of private data which runs internally, so there is no reason to
expose to the platform data.

And LP855x DT property, 'power-supply' is unnecessary.
If a regulator is registered correctly, then lp855x driver can get
regulator resource by using devm_regulator_get().
So devm_regulator_get() is moved from _parse_dt() to _probe().
Ex) The following device tree works without 'power-supply' property.

i2c0: i2c@10002000 {
(snip)

backlight@2c {
compatible = "ti,lp8556";
reg = <0x2c>;

bl-name = "lcd-bl";
dev-ctrl = /bits/ 8 <0x85>;
init-brt = /bits/ 8 <0x10>;
};
};

/* 'power' regulator for LP8556 VDD */
bl_vdd: fixed-regulator@1 {
compatible = "regulator-fixed";
regulator-name = "power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;

(snip)
};

Cc: Sean Paul <[email protected]>
Cc: Jingoo Han <[email protected]>
Cc: Lee Jones <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Milo Kim <[email protected]>
---
.../devicetree/bindings/video/backlight/lp855x.txt | 2 --
drivers/video/backlight/lp855x_bl.c | 20 +++++++++-----------
include/linux/platform_data/lp855x.h | 2 --
3 files changed, 9 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
index 0a3ecbc..96e83a5 100644
--- a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
+++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
@@ -12,7 +12,6 @@ Optional properties:
- pwm-period: PWM period value. Set only PWM input mode used (u32)
- rom-addr: Register address of ROM area to be updated (u8)
- rom-val: Register value to be updated (u8)
- - power-supply: Regulator which controls the 3V rail

Example:

@@ -57,7 +56,6 @@ Example:
backlight@2c {
compatible = "ti,lp8557";
reg = <0x2c>;
- power-supply = <&backlight_vdd>;

dev-ctrl = /bits/ 8 <0x41>;
init-brt = /bits/ 8 <0x0a>;
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index a26d3bb..277d5ca 100644
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -73,6 +73,7 @@ struct lp855x {
struct device *dev;
struct lp855x_platform_data *pdata;
struct pwm_device *pwm;
+ struct regulator *supply; /* regulator for VDD input */
};

static int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data)
@@ -384,13 +385,6 @@ static int lp855x_parse_dt(struct lp855x *lp)
pdata->rom_data = &rom[0];
}

- pdata->supply = devm_regulator_get(dev, "power");
- if (IS_ERR(pdata->supply)) {
- if (PTR_ERR(pdata->supply) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- pdata->supply = NULL;
- }
-
lp->pdata = pdata;

return 0;
@@ -431,8 +425,12 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
else
lp->mode = REGISTER_BASED;

- if (lp->pdata->supply) {
- ret = regulator_enable(lp->pdata->supply);
+ lp->supply = devm_regulator_get(lp->dev, "power");
+ if (IS_ERR(lp->supply))
+ lp->supply = NULL;
+
+ if (lp->supply) {
+ ret = regulator_enable(lp->supply);
if (ret < 0) {
dev_err(&cl->dev, "failed to enable supply: %d\n", ret);
return ret;
@@ -470,8 +468,8 @@ static int lp855x_remove(struct i2c_client *cl)

lp->bl->props.brightness = 0;
backlight_update_status(lp->bl);
- if (lp->pdata->supply)
- regulator_disable(lp->pdata->supply);
+ if (lp->supply)
+ regulator_disable(lp->supply);
sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);

return 0;
diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
index 9c7fd1e..1b2ba24 100644
--- a/include/linux/platform_data/lp855x.h
+++ b/include/linux/platform_data/lp855x.h
@@ -136,7 +136,6 @@ struct lp855x_rom_data {
Only valid when mode is PWM_BASED.
* @size_program : total size of lp855x_rom_data
* @rom_data : list of new eeprom/eprom registers
- * @supply : regulator that supplies 3V input
*/
struct lp855x_platform_data {
const char *name;
@@ -145,7 +144,6 @@ struct lp855x_platform_data {
unsigned int period_ns;
int size_program;
struct lp855x_rom_data *rom_data;
- struct regulator *supply;
};

#endif
--
1.9.1


2015-07-05 12:49:19

by Jingoo Han

[permalink] [raw]
Subject: Re: [PATCH] backlight: lp855x: use private data for regulator control

On Tuesday, June 30, 2015 3:16 PM, Milo Kim wrote:
>
> LP855x backlight device can be enabled by external VDD input.
> The 'supply' data is used for this purpose.
> It's kind of private data which runs internally, so there is no reason to
> expose to the platform data.
>
> And LP855x DT property, 'power-supply' is unnecessary.
> If a regulator is registered correctly, then lp855x driver can get
> regulator resource by using devm_regulator_get().
> So devm_regulator_get() is moved from _parse_dt() to _probe().
> Ex) The following device tree works without 'power-supply' property.
>
> i2c0: i2c@10002000 {
> (snip)
>
> backlight@2c {
> compatible = "ti,lp8556";
> reg = <0x2c>;
>
> bl-name = "lcd-bl";
> dev-ctrl = /bits/ 8 <0x85>;
> init-brt = /bits/ 8 <0x10>;
> };
> };
>
> /* 'power' regulator for LP8556 VDD */
> bl_vdd: fixed-regulator@1 {
> compatible = "regulator-fixed";
> regulator-name = "power";
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
>
> (snip)
> };
>
> Cc: Sean Paul <[email protected]>
> Cc: Jingoo Han <[email protected]>
> Cc: Lee Jones <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Milo Kim <[email protected]>

Acked-by: Jingoo Han <[email protected]>

Best regards,
Jingoo Han

> ---
> .../devicetree/bindings/video/backlight/lp855x.txt | 2 --
> drivers/video/backlight/lp855x_bl.c | 20 +++++++++-----------
> include/linux/platform_data/lp855x.h | 2 --
> 3 files changed, 9 insertions(+), 15 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> index 0a3ecbc..96e83a5 100644
> --- a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> +++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> @@ -12,7 +12,6 @@ Optional properties:
> - pwm-period: PWM period value. Set only PWM input mode used (u32)
> - rom-addr: Register address of ROM area to be updated (u8)
> - rom-val: Register value to be updated (u8)
> - - power-supply: Regulator which controls the 3V rail
>
> Example:
>
> @@ -57,7 +56,6 @@ Example:
> backlight@2c {
> compatible = "ti,lp8557";
> reg = <0x2c>;
> - power-supply = <&backlight_vdd>;
>
> dev-ctrl = /bits/ 8 <0x41>;
> init-brt = /bits/ 8 <0x0a>;
> diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
> index a26d3bb..277d5ca 100644
> --- a/drivers/video/backlight/lp855x_bl.c
> +++ b/drivers/video/backlight/lp855x_bl.c
> @@ -73,6 +73,7 @@ struct lp855x {
> struct device *dev;
> struct lp855x_platform_data *pdata;
> struct pwm_device *pwm;
> + struct regulator *supply; /* regulator for VDD input */
> };
>
> static int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data)
> @@ -384,13 +385,6 @@ static int lp855x_parse_dt(struct lp855x *lp)
> pdata->rom_data = &rom[0];
> }
>
> - pdata->supply = devm_regulator_get(dev, "power");
> - if (IS_ERR(pdata->supply)) {
> - if (PTR_ERR(pdata->supply) == -EPROBE_DEFER)
> - return -EPROBE_DEFER;
> - pdata->supply = NULL;
> - }
> -
> lp->pdata = pdata;
>
> return 0;
> @@ -431,8 +425,12 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> else
> lp->mode = REGISTER_BASED;
>
> - if (lp->pdata->supply) {
> - ret = regulator_enable(lp->pdata->supply);
> + lp->supply = devm_regulator_get(lp->dev, "power");
> + if (IS_ERR(lp->supply))
> + lp->supply = NULL;
> +
> + if (lp->supply) {
> + ret = regulator_enable(lp->supply);
> if (ret < 0) {
> dev_err(&cl->dev, "failed to enable supply: %d\n", ret);
> return ret;
> @@ -470,8 +468,8 @@ static int lp855x_remove(struct i2c_client *cl)
>
> lp->bl->props.brightness = 0;
> backlight_update_status(lp->bl);
> - if (lp->pdata->supply)
> - regulator_disable(lp->pdata->supply);
> + if (lp->supply)
> + regulator_disable(lp->supply);
> sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
>
> return 0;
> diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
> index 9c7fd1e..1b2ba24 100644
> --- a/include/linux/platform_data/lp855x.h
> +++ b/include/linux/platform_data/lp855x.h
> @@ -136,7 +136,6 @@ struct lp855x_rom_data {
> Only valid when mode is PWM_BASED.
> * @size_program : total size of lp855x_rom_data
> * @rom_data : list of new eeprom/eprom registers
> - * @supply : regulator that supplies 3V input
> */
> struct lp855x_platform_data {
> const char *name;
> @@ -145,7 +144,6 @@ struct lp855x_platform_data {
> unsigned int period_ns;
> int size_program;
> struct lp855x_rom_data *rom_data;
> - struct regulator *supply;
> };
>
> #endif
> --
> 1.9.1

2015-07-06 06:54:48

by Lee Jones

[permalink] [raw]
Subject: Re: [PATCH] backlight: lp855x: use private data for regulator control

On Sun, 05 Jul 2015, Jingoo Han wrote:

> On Tuesday, June 30, 2015 3:16 PM, Milo Kim wrote:
> >
> > LP855x backlight device can be enabled by external VDD input.
> > The 'supply' data is used for this purpose.
> > It's kind of private data which runs internally, so there is no reason to
> > expose to the platform data.
> >
> > And LP855x DT property, 'power-supply' is unnecessary.
> > If a regulator is registered correctly, then lp855x driver can get
> > regulator resource by using devm_regulator_get().
> > So devm_regulator_get() is moved from _parse_dt() to _probe().
> > Ex) The following device tree works without 'power-supply' property.

Even if it's not 'required', I think it would be good to have it in
DT, as it describes the hardware, right?

> > i2c0: i2c@10002000 {
> > (snip)
> >
> > backlight@2c {
> > compatible = "ti,lp8556";
> > reg = <0x2c>;
> >
> > bl-name = "lcd-bl";
> > dev-ctrl = /bits/ 8 <0x85>;
> > init-brt = /bits/ 8 <0x10>;
> > };
> > };
> >
> > /* 'power' regulator for LP8556 VDD */
> > bl_vdd: fixed-regulator@1 {
> > compatible = "regulator-fixed";
> > regulator-name = "power";
> > regulator-min-microvolt = <3300000>;
> > regulator-max-microvolt = <3300000>;
> >
> > (snip)
> > };
> >
> > Cc: Sean Paul <[email protected]>
> > Cc: Jingoo Han <[email protected]>
> > Cc: Lee Jones <[email protected]>
> > Cc: [email protected]
> > Cc: [email protected]
> > Signed-off-by: Milo Kim <[email protected]>
>
> Acked-by: Jingoo Han <[email protected]>
>
> Best regards,
> Jingoo Han
>
> > ---
> > .../devicetree/bindings/video/backlight/lp855x.txt | 2 --
> > drivers/video/backlight/lp855x_bl.c | 20 +++++++++-----------
> > include/linux/platform_data/lp855x.h | 2 --
> > 3 files changed, 9 insertions(+), 15 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> > b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> > index 0a3ecbc..96e83a5 100644
> > --- a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> > +++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> > @@ -12,7 +12,6 @@ Optional properties:
> > - pwm-period: PWM period value. Set only PWM input mode used (u32)
> > - rom-addr: Register address of ROM area to be updated (u8)
> > - rom-val: Register value to be updated (u8)
> > - - power-supply: Regulator which controls the 3V rail
> >
> > Example:
> >
> > @@ -57,7 +56,6 @@ Example:
> > backlight@2c {
> > compatible = "ti,lp8557";
> > reg = <0x2c>;
> > - power-supply = <&backlight_vdd>;
> >
> > dev-ctrl = /bits/ 8 <0x41>;
> > init-brt = /bits/ 8 <0x0a>;
> > diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
> > index a26d3bb..277d5ca 100644
> > --- a/drivers/video/backlight/lp855x_bl.c
> > +++ b/drivers/video/backlight/lp855x_bl.c
> > @@ -73,6 +73,7 @@ struct lp855x {
> > struct device *dev;
> > struct lp855x_platform_data *pdata;
> > struct pwm_device *pwm;
> > + struct regulator *supply; /* regulator for VDD input */
> > };
> >
> > static int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data)
> > @@ -384,13 +385,6 @@ static int lp855x_parse_dt(struct lp855x *lp)
> > pdata->rom_data = &rom[0];
> > }
> >
> > - pdata->supply = devm_regulator_get(dev, "power");
> > - if (IS_ERR(pdata->supply)) {
> > - if (PTR_ERR(pdata->supply) == -EPROBE_DEFER)
> > - return -EPROBE_DEFER;
> > - pdata->supply = NULL;
> > - }
> > -
> > lp->pdata = pdata;
> >
> > return 0;
> > @@ -431,8 +425,12 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> > else
> > lp->mode = REGISTER_BASED;
> >
> > - if (lp->pdata->supply) {
> > - ret = regulator_enable(lp->pdata->supply);
> > + lp->supply = devm_regulator_get(lp->dev, "power");
> > + if (IS_ERR(lp->supply))
> > + lp->supply = NULL;
> > +
> > + if (lp->supply) {
> > + ret = regulator_enable(lp->supply);
> > if (ret < 0) {
> > dev_err(&cl->dev, "failed to enable supply: %d\n", ret);
> > return ret;
> > @@ -470,8 +468,8 @@ static int lp855x_remove(struct i2c_client *cl)
> >
> > lp->bl->props.brightness = 0;
> > backlight_update_status(lp->bl);
> > - if (lp->pdata->supply)
> > - regulator_disable(lp->pdata->supply);
> > + if (lp->supply)
> > + regulator_disable(lp->supply);
> > sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
> >
> > return 0;
> > diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
> > index 9c7fd1e..1b2ba24 100644
> > --- a/include/linux/platform_data/lp855x.h
> > +++ b/include/linux/platform_data/lp855x.h
> > @@ -136,7 +136,6 @@ struct lp855x_rom_data {
> > Only valid when mode is PWM_BASED.
> > * @size_program : total size of lp855x_rom_data
> > * @rom_data : list of new eeprom/eprom registers
> > - * @supply : regulator that supplies 3V input
> > */
> > struct lp855x_platform_data {
> > const char *name;
> > @@ -145,7 +144,6 @@ struct lp855x_platform_data {
> > unsigned int period_ns;
> > int size_program;
> > struct lp855x_rom_data *rom_data;
> > - struct regulator *supply;
> > };
> >
> > #endif
>

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

2015-07-06 07:33:22

by Jingoo Han

[permalink] [raw]
Subject: Re: [PATCH] backlight: lp855x: use private data for regulator control

On 2015. 7. 6., at PM 3:54, Lee Jones <[email protected]> wrote:
>
>> On Sun, 05 Jul 2015, Jingoo Han wrote:
>>
>>> On Tuesday, June 30, 2015 3:16 PM, Milo Kim wrote:
>>>
>>> LP855x backlight device can be enabled by external VDD input.
>>> The 'supply' data is used for this purpose.
>>> It's kind of private data which runs internally, so there is no reason to
>>> expose to the platform data.
>>>
>>> And LP855x DT property, 'power-supply' is unnecessary.
>>> If a regulator is registered correctly, then lp855x driver can get
>>> regulator resource by using devm_regulator_get().
>>> So devm_regulator_get() is moved from _parse_dt() to _probe().
>>> Ex) The following device tree works without 'power-supply' property.
>
> Even if it's not 'required', I think it would be good to have it in
> DT, as it describes the hardware, right?

OK, I see.
If the 'regulator-name' is changed from 'power' to other names,
lp855x driver will not find the regulator. However, when 'power-supply' is added, it is more noticeable.

To Milo,

Would you send the patch v2 that
does not remove dt property from lp855x.txt?

Best regards,
Jingoo Han

>>> i2c0: i2c@10002000 {
>>> (snip)
>>>
>>> backlight@2c {
>>> compatible = "ti,lp8556";
>>> reg = <0x2c>;
>>>
>>> bl-name = "lcd-bl";
>>> dev-ctrl = /bits/ 8 <0x85>;
>>> init-brt = /bits/ 8 <0x10>;
>>> };
>>> };
>>>
>>> /* 'power' regulator for LP8556 VDD */
>>> bl_vdd: fixed-regulator@1 {
>>> compatible = "regulator-fixed";
>>> regulator-name = "power";
>>> regulator-min-microvolt = <3300000>;
>>> regulator-max-microvolt = <3300000>;
>>>
>>> (snip)
>>> };
>>>
>>> Cc: Sean Paul <[email protected]>
>>> Cc: Jingoo Han <[email protected]>
>>> Cc: Lee Jones <[email protected]>
>>> Cc: [email protected]
>>> Cc: [email protected]
>>> Signed-off-by: Milo Kim <[email protected]>
>>
>> Acked-by: Jingoo Han <[email protected]>
>>
>> Best regards,
>> Jingoo Han
>>
>>> ---
>>> .../devicetree/bindings/video/backlight/lp855x.txt | 2 --
>>> drivers/video/backlight/lp855x_bl.c | 20 +++++++++-----------
>>> include/linux/platform_data/lp855x.h | 2 --
>>> 3 files changed, 9 insertions(+), 15 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
>>> b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
>>> index 0a3ecbc..96e83a5 100644
>>> --- a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
>>> +++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
>>> @@ -12,7 +12,6 @@ Optional properties:
>>> - pwm-period: PWM period value. Set only PWM input mode used (u32)
>>> - rom-addr: Register address of ROM area to be updated (u8)
>>> - rom-val: Register value to be updated (u8)
>>> - - power-supply: Regulator which controls the 3V rail
>>>
>>> Example:
>>>
>>> @@ -57,7 +56,6 @@ Example:
>>> backlight@2c {
>>> compatible = "ti,lp8557";
>>> reg = <0x2c>;
>>> - power-supply = <&backlight_vdd>;
>>>
>>> dev-ctrl = /bits/ 8 <0x41>;
>>> init-brt = /bits/ 8 <0x0a>;
>>> diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
>>> index a26d3bb..277d5ca 100644
>>> --- a/drivers/video/backlight/lp855x_bl.c
>>> +++ b/drivers/video/backlight/lp855x_bl.c
>>> @@ -73,6 +73,7 @@ struct lp855x {
>>> struct device *dev;
>>> struct lp855x_platform_data *pdata;
>>> struct pwm_device *pwm;
>>> + struct regulator *supply; /* regulator for VDD input */
>>> };
>>>
>>> static int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data)
>>> @@ -384,13 +385,6 @@ static int lp855x_parse_dt(struct lp855x *lp)
>>> pdata->rom_data = &rom[0];
>>> }
>>>
>>> - pdata->supply = devm_regulator_get(dev, "power");
>>> - if (IS_ERR(pdata->supply)) {
>>> - if (PTR_ERR(pdata->supply) == -EPROBE_DEFER)
>>> - return -EPROBE_DEFER;
>>> - pdata->supply = NULL;
>>> - }
>>> -
>>> lp->pdata = pdata;
>>>
>>> return 0;
>>> @@ -431,8 +425,12 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
>>> else
>>> lp->mode = REGISTER_BASED;
>>>
>>> - if (lp->pdata->supply) {
>>> - ret = regulator_enable(lp->pdata->supply);
>>> + lp->supply = devm_regulator_get(lp->dev, "power");
>>> + if (IS_ERR(lp->supply))
>>> + lp->supply = NULL;
>>> +
>>> + if (lp->supply) {
>>> + ret = regulator_enable(lp->supply);
>>> if (ret < 0) {
>>> dev_err(&cl->dev, "failed to enable supply: %d\n", ret);
>>> return ret;
>>> @@ -470,8 +468,8 @@ static int lp855x_remove(struct i2c_client *cl)
>>>
>>> lp->bl->props.brightness = 0;
>>> backlight_update_status(lp->bl);
>>> - if (lp->pdata->supply)
>>> - regulator_disable(lp->pdata->supply);
>>> + if (lp->supply)
>>> + regulator_disable(lp->supply);
>>> sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
>>>
>>> return 0;
>>> diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
>>> index 9c7fd1e..1b2ba24 100644
>>> --- a/include/linux/platform_data/lp855x.h
>>> +++ b/include/linux/platform_data/lp855x.h
>>> @@ -136,7 +136,6 @@ struct lp855x_rom_data {
>>> Only valid when mode is PWM_BASED.
>>> * @size_program : total size of lp855x_rom_data
>>> * @rom_data : list of new eeprom/eprom registers
>>> - * @supply : regulator that supplies 3V input
>>> */
>>> struct lp855x_platform_data {
>>> const char *name;
>>> @@ -145,7 +144,6 @@ struct lp855x_platform_data {
>>> unsigned int period_ns;
>>> int size_program;
>>> struct lp855x_rom_data *rom_data;
>>> - struct regulator *supply;
>>> };
>>>
>>> #endif
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org ?? Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog

2015-07-09 13:54:01

by Sean Paul

[permalink] [raw]
Subject: Re: [PATCH] backlight: lp855x: use private data for regulator control

On Mon, Jul 6, 2015 at 2:54 AM, Lee Jones <[email protected]> wrote:
> On Sun, 05 Jul 2015, Jingoo Han wrote:
>
>> On Tuesday, June 30, 2015 3:16 PM, Milo Kim wrote:
>> >
>> > LP855x backlight device can be enabled by external VDD input.
>> > The 'supply' data is used for this purpose.
>> > It's kind of private data which runs internally, so there is no reason to
>> > expose to the platform data.
>> >
>> > And LP855x DT property, 'power-supply' is unnecessary.
>> > If a regulator is registered correctly, then lp855x driver can get
>> > regulator resource by using devm_regulator_get().
>> > So devm_regulator_get() is moved from _parse_dt() to _probe().
>> > Ex) The following device tree works without 'power-supply' property.
>
> Even if it's not 'required', I think it would be good to have it in
> DT, as it describes the hardware, right?
>

Yeah. I think it's common practice to specify regulator input in DT.

I'd rather this patch was not merged.

Sean


>> > i2c0: i2c@10002000 {
>> > (snip)
>> >
>> > backlight@2c {
>> > compatible = "ti,lp8556";
>> > reg = <0x2c>;
>> >
>> > bl-name = "lcd-bl";
>> > dev-ctrl = /bits/ 8 <0x85>;
>> > init-brt = /bits/ 8 <0x10>;
>> > };
>> > };
>> >
>> > /* 'power' regulator for LP8556 VDD */
>> > bl_vdd: fixed-regulator@1 {
>> > compatible = "regulator-fixed";
>> > regulator-name = "power";
>> > regulator-min-microvolt = <3300000>;
>> > regulator-max-microvolt = <3300000>;
>> >
>> > (snip)
>> > };
>> >
>> > Cc: Sean Paul <[email protected]>
>> > Cc: Jingoo Han <[email protected]>
>> > Cc: Lee Jones <[email protected]>
>> > Cc: [email protected]
>> > Cc: [email protected]
>> > Signed-off-by: Milo Kim <[email protected]>
>>
>> Acked-by: Jingoo Han <[email protected]>
>>
>> Best regards,
>> Jingoo Han
>>
>> > ---
>> > .../devicetree/bindings/video/backlight/lp855x.txt | 2 --
>> > drivers/video/backlight/lp855x_bl.c | 20 +++++++++-----------
>> > include/linux/platform_data/lp855x.h | 2 --
>> > 3 files changed, 9 insertions(+), 15 deletions(-)
>> >
>> > diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
>> > b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
>> > index 0a3ecbc..96e83a5 100644
>> > --- a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
>> > +++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
>> > @@ -12,7 +12,6 @@ Optional properties:
>> > - pwm-period: PWM period value. Set only PWM input mode used (u32)
>> > - rom-addr: Register address of ROM area to be updated (u8)
>> > - rom-val: Register value to be updated (u8)
>> > - - power-supply: Regulator which controls the 3V rail
>> >
>> > Example:
>> >
>> > @@ -57,7 +56,6 @@ Example:
>> > backlight@2c {
>> > compatible = "ti,lp8557";
>> > reg = <0x2c>;
>> > - power-supply = <&backlight_vdd>;
>> >
>> > dev-ctrl = /bits/ 8 <0x41>;
>> > init-brt = /bits/ 8 <0x0a>;
>> > diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
>> > index a26d3bb..277d5ca 100644
>> > --- a/drivers/video/backlight/lp855x_bl.c
>> > +++ b/drivers/video/backlight/lp855x_bl.c
>> > @@ -73,6 +73,7 @@ struct lp855x {
>> > struct device *dev;
>> > struct lp855x_platform_data *pdata;
>> > struct pwm_device *pwm;
>> > + struct regulator *supply; /* regulator for VDD input */
>> > };
>> >
>> > static int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data)
>> > @@ -384,13 +385,6 @@ static int lp855x_parse_dt(struct lp855x *lp)
>> > pdata->rom_data = &rom[0];
>> > }
>> >
>> > - pdata->supply = devm_regulator_get(dev, "power");
>> > - if (IS_ERR(pdata->supply)) {
>> > - if (PTR_ERR(pdata->supply) == -EPROBE_DEFER)
>> > - return -EPROBE_DEFER;
>> > - pdata->supply = NULL;
>> > - }
>> > -
>> > lp->pdata = pdata;
>> >
>> > return 0;
>> > @@ -431,8 +425,12 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
>> > else
>> > lp->mode = REGISTER_BASED;
>> >
>> > - if (lp->pdata->supply) {
>> > - ret = regulator_enable(lp->pdata->supply);
>> > + lp->supply = devm_regulator_get(lp->dev, "power");
>> > + if (IS_ERR(lp->supply))
>> > + lp->supply = NULL;
>> > +
>> > + if (lp->supply) {
>> > + ret = regulator_enable(lp->supply);
>> > if (ret < 0) {
>> > dev_err(&cl->dev, "failed to enable supply: %d\n", ret);
>> > return ret;
>> > @@ -470,8 +468,8 @@ static int lp855x_remove(struct i2c_client *cl)
>> >
>> > lp->bl->props.brightness = 0;
>> > backlight_update_status(lp->bl);
>> > - if (lp->pdata->supply)
>> > - regulator_disable(lp->pdata->supply);
>> > + if (lp->supply)
>> > + regulator_disable(lp->supply);
>> > sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
>> >
>> > return 0;
>> > diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
>> > index 9c7fd1e..1b2ba24 100644
>> > --- a/include/linux/platform_data/lp855x.h
>> > +++ b/include/linux/platform_data/lp855x.h
>> > @@ -136,7 +136,6 @@ struct lp855x_rom_data {
>> > Only valid when mode is PWM_BASED.
>> > * @size_program : total size of lp855x_rom_data
>> > * @rom_data : list of new eeprom/eprom registers
>> > - * @supply : regulator that supplies 3V input
>> > */
>> > struct lp855x_platform_data {
>> > const char *name;
>> > @@ -145,7 +144,6 @@ struct lp855x_platform_data {
>> > unsigned int period_ns;
>> > int size_program;
>> > struct lp855x_rom_data *rom_data;
>> > - struct regulator *supply;
>> > };
>> >
>> > #endif
>>
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog