Qualcomm Debug Subsystem clock is used by CoreSight components.
Add required definitions for it. qcom_rpm_resource::status_id is
not used by driver, so just mark it as ~0.
Signed-off-by: Ivan T. Ivanov <[email protected]>
---
Changes since first version:
* Use ~0 initializer for status_id, this field is not used by driver.
drivers/mfd/qcom_rpm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
index 12e3243..6afc9fa 100644
--- a/drivers/mfd/qcom_rpm.c
+++ b/drivers/mfd/qcom_rpm.c
@@ -149,6 +149,7 @@ static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
[QCOM_RPM_USB_OTG_SWITCH] = { 210, 125, 82, 1 },
[QCOM_RPM_HDMI_SWITCH] = { 211, 126, 83, 1 },
[QCOM_RPM_DDR_DMM] = { 212, 127, 84, 2 },
+ [QCOM_RPM_QDSS_CLK] = { 214, ~0, 7, 1 },
[QCOM_RPM_VDDMIN_GPIO] = { 215, 131, 89, 1 },
};
--
1.9.1
On Wed 08 Jul 02:40 PDT 2015, Ivan T. Ivanov wrote:
> Qualcomm Debug Subsystem clock is used by CoreSight components.
> Add required definitions for it. qcom_rpm_resource::status_id is
> not used by driver, so just mark it as ~0.
>
> Signed-off-by: Ivan T. Ivanov <[email protected]>
> ---
Acked-by: Bjorn Andersson <[email protected]>
Regards,
Bjorn
On Wed, 08 Jul 2015, Ivan T. Ivanov wrote:
> Qualcomm Debug Subsystem clock is used by CoreSight components.
> Add required definitions for it. qcom_rpm_resource::status_id is
> not used by driver, so just mark it as ~0.
>
> Signed-off-by: Ivan T. Ivanov <[email protected]>
> ---
>
> Changes since first version:
>
> * Use ~0 initializer for status_id, this field is not used by driver.
>
> drivers/mfd/qcom_rpm.c | 1 +
> 1 file changed, 1 insertion(+)
Applied, thanks.
> diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
> index 12e3243..6afc9fa 100644
> --- a/drivers/mfd/qcom_rpm.c
> +++ b/drivers/mfd/qcom_rpm.c
> @@ -149,6 +149,7 @@ static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
> [QCOM_RPM_USB_OTG_SWITCH] = { 210, 125, 82, 1 },
> [QCOM_RPM_HDMI_SWITCH] = { 211, 126, 83, 1 },
> [QCOM_RPM_DDR_DMM] = { 212, 127, 84, 2 },
> + [QCOM_RPM_QDSS_CLK] = { 214, ~0, 7, 1 },
> [QCOM_RPM_VDDMIN_GPIO] = { 215, 131, 89, 1 },
> };
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog