From: Igal Liberman <[email protected]>
The FMan MAC FLib provides basic API used by the drivers to
configure and control the FMan MAC hardware.
Signed-off-by: Igal Liberman <[email protected]>
---
drivers/net/ethernet/freescale/fman/Makefile | 1 +
.../net/ethernet/freescale/fman/flib/fsl_enet.h | 135 ++++
.../ethernet/freescale/fman/flib/fsl_fman_dtsec.h | 809 ++++++++++++++++++++
.../freescale/fman/flib/fsl_fman_dtsec_mii_acc.h | 89 +++
.../ethernet/freescale/fman/flib/fsl_fman_memac.h | 428 +++++++++++
.../freescale/fman/flib/fsl_fman_memac_mii_acc.h | 72 ++
.../ethernet/freescale/fman/flib/fsl_fman_tgec.h | 393 ++++++++++
drivers/net/ethernet/freescale/fman/mac/Makefile | 5 +
.../net/ethernet/freescale/fman/mac/fman_dtsec.c | 503 ++++++++++++
.../freescale/fman/mac/fman_dtsec_mii_acc.c | 153 ++++
.../net/ethernet/freescale/fman/mac/fman_memac.c | 374 +++++++++
.../freescale/fman/mac/fman_memac_mii_acc.c | 151 ++++
.../net/ethernet/freescale/fman/mac/fman_tgec.c | 207 +++++
13 files changed, 3320 insertions(+)
create mode 100644 drivers/net/ethernet/freescale/fman/flib/fsl_enet.h
create mode 100644 drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec.h
create mode 100644 drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec_mii_acc.h
create mode 100644 drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac.h
create mode 100644 drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac_mii_acc.h
create mode 100644 drivers/net/ethernet/freescale/fman/flib/fsl_fman_tgec.h
create mode 100644 drivers/net/ethernet/freescale/fman/mac/Makefile
create mode 100644 drivers/net/ethernet/freescale/fman/mac/fman_dtsec.c
create mode 100644 drivers/net/ethernet/freescale/fman/mac/fman_dtsec_mii_acc.c
create mode 100644 drivers/net/ethernet/freescale/fman/mac/fman_memac.c
create mode 100644 drivers/net/ethernet/freescale/fman/mac/fman_memac_mii_acc.c
create mode 100644 drivers/net/ethernet/freescale/fman/mac/fman_tgec.c
diff --git a/drivers/net/ethernet/freescale/fman/Makefile b/drivers/net/ethernet/freescale/fman/Makefile
index 50a4de2..1841b03 100644
--- a/drivers/net/ethernet/freescale/fman/Makefile
+++ b/drivers/net/ethernet/freescale/fman/Makefile
@@ -5,3 +5,4 @@ obj-y += fsl_fman.o
fsl_fman-objs := fman.o
obj-y += port/
+obj-y += mac/
diff --git a/drivers/net/ethernet/freescale/fman/flib/fsl_enet.h b/drivers/net/ethernet/freescale/fman/flib/fsl_enet.h
new file mode 100644
index 0000000..4b79e83
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/flib/fsl_enet.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_ENET_H
+#define __FSL_ENET_H
+
+/* Ethernet MAC-PHY Interface */
+enum enet_interface {
+ E_ENET_IF_MII = 0x00010000, /* MII interface */
+ E_ENET_IF_RMII = 0x00020000, /* RMII interface */
+ E_ENET_IF_SMII = 0x00030000, /* SMII interface */
+ E_ENET_IF_GMII = 0x00040000, /* GMII interface */
+ E_ENET_IF_RGMII = 0x00050000, /* RGMII interface */
+ E_ENET_IF_TBI = 0x00060000, /* TBI interface */
+ E_ENET_IF_RTBI = 0x00070000, /* RTBI interface */
+ E_ENET_IF_SGMII = 0x00080000, /* SGMII interface */
+ E_ENET_IF_XGMII = 0x00090000, /* XGMII interface */
+ E_ENET_IF_QSGMII = 0x000a0000, /* QSGMII interface */
+ E_ENET_IF_XFI = 0x000b0000 /* XFI interface */
+};
+
+/* Ethernet Speed (nominal data rate) */
+enum enet_speed {
+ E_ENET_SPEED_10 = 10, /* 10 Mbps */
+ E_ENET_SPEED_100 = 100, /* 100 Mbps */
+ E_ENET_SPEED_1000 = 1000, /* 1000 Mbps = 1 Gbps */
+ E_ENET_SPEED_10000 = 10000 /* 10000 Mbps = 10 Gbps */
+};
+
+/* SGMII/QSGII interface with 1000BaseX auto-negotiation between MAC
+ * and phy or backplane;
+ * Note: 1000BaseX auto-negotiation relates only to interface between MAC
+ * and phy/backplane, SGMII phy can still synchronize with far-end phy at
+ * 10Mbps, 100Mbps or 1000Mbps
+ */
+#define ENET_IF_SGMII_BASEX 0x80000000
+
+enum enet_mode {
+ E_ENET_MODE_INVALID = 0,
+ /* Invalid Ethernet mode */
+ E_ENET_MODE_MII_10 = (E_ENET_IF_MII | E_ENET_SPEED_10),
+ /* 10 Mbps MII */
+ E_ENET_MODE_MII_100 = (E_ENET_IF_MII | E_ENET_SPEED_100),
+ /* 100 Mbps MII */
+ E_ENET_MODE_RMII_10 = (E_ENET_IF_RMII | E_ENET_SPEED_10),
+ /* 10 Mbps RMII */
+ E_ENET_MODE_RMII_100 = (E_ENET_IF_RMII | E_ENET_SPEED_100),
+ /* 100 Mbps RMII */
+ E_ENET_MODE_SMII_10 = (E_ENET_IF_SMII | E_ENET_SPEED_10),
+ /* 10 Mbps SMII */
+ E_ENET_MODE_SMII_100 = (E_ENET_IF_SMII | E_ENET_SPEED_100),
+ /* 100 Mbps SMII */
+ E_ENET_MODE_GMII_1000 = (E_ENET_IF_GMII | E_ENET_SPEED_1000),
+ /* 1000 Mbps GMII */
+ E_ENET_MODE_RGMII_10 = (E_ENET_IF_RGMII | E_ENET_SPEED_10),
+ /* 10 Mbps RGMII */
+ E_ENET_MODE_RGMII_100 = (E_ENET_IF_RGMII | E_ENET_SPEED_100),
+ /* 100 Mbps RGMII */
+ E_ENET_MODE_RGMII_1000 = (E_ENET_IF_RGMII | E_ENET_SPEED_1000),
+ /* 1000 Mbps RGMII */
+ E_ENET_MODE_TBI_1000 = (E_ENET_IF_TBI | E_ENET_SPEED_1000),
+ /* 1000 Mbps TBI */
+ E_ENET_MODE_RTBI_1000 = (E_ENET_IF_RTBI | E_ENET_SPEED_1000),
+ /* 1000 Mbps RTBI */
+ E_ENET_MODE_SGMII_10 = (E_ENET_IF_SGMII | E_ENET_SPEED_10),
+ /* 10 Mbps SGMII with auto-negotiation between MAC and
+ * SGMII phy according to Cisco SGMII specification
+ */
+ E_ENET_MODE_SGMII_100 = (E_ENET_IF_SGMII | E_ENET_SPEED_100),
+ /* 100 Mbps SGMII with auto-negotiation between MAC and
+ * SGMII phy according to Cisco SGMII specification
+ */
+ E_ENET_MODE_SGMII_1000 = (E_ENET_IF_SGMII | E_ENET_SPEED_1000),
+ /* 1000 Mbps SGMII with auto-negotiation between MAC and
+ * SGMII phy according to Cisco SGMII specification
+ */
+ E_ENET_MODE_SGMII_BASEX_10 = (ENET_IF_SGMII_BASEX | E_ENET_IF_SGMII
+ | E_ENET_SPEED_10),
+ /* 10 Mbps SGMII with 1000BaseX auto-negotiation between
+ * MAC and SGMII phy or backplane
+ */
+ E_ENET_MODE_SGMII_BASEX_100 = (ENET_IF_SGMII_BASEX | E_ENET_IF_SGMII
+ | E_ENET_SPEED_100),
+ /* 100 Mbps SGMII with 1000BaseX auto-negotiation between
+ * MAC and SGMII phy or backplane
+ */
+ E_ENET_MODE_SGMII_BASEX_1000 = (ENET_IF_SGMII_BASEX | E_ENET_IF_SGMII
+ | E_ENET_SPEED_1000),
+ /* 1000 Mbps SGMII with 1000BaseX auto-negotiation between
+ * MAC and SGMII phy or backplane
+ */
+ E_ENET_MODE_QSGMII_1000 = (E_ENET_IF_QSGMII | E_ENET_SPEED_1000),
+ /* 1000 Mbps QSGMII with auto-negotiation between MAC and
+ * QSGMII phy according to Cisco QSGMII specification
+ */
+ E_ENET_MODE_QSGMII_BASEX_1000 = (ENET_IF_SGMII_BASEX | E_ENET_IF_QSGMII
+ | E_ENET_SPEED_1000),
+ /* 1000 Mbps QSGMII with 1000BaseX auto-negotiation between
+ * MAC and QSGMII phy or backplane
+ */
+ E_ENET_MODE_XGMII_10000 = (E_ENET_IF_XGMII | E_ENET_SPEED_10000),
+ /* 10000 Mbps XGMII */
+ E_ENET_MODE_XFI_10000 = (E_ENET_IF_XFI | E_ENET_SPEED_10000)
+ /* 10000 Mbps XFI */
+};
+
+#endif /* __FSL_ENET_H */
diff --git a/drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec.h b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec.h
new file mode 100644
index 0000000..2608a06
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec.h
@@ -0,0 +1,809 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_FMAN_DTSEC_H
+#define __FSL_FMAN_DTSEC_H
+
+#include <linux/io.h>
+
+#include "fsl_enet.h"
+
+/* dTSEC Init sequence
+ * To prepare dTSEC block for transfer use the following call sequence:
+ * - fman_dtsec_defconfig() - This step is optional and yet recommended. Its
+ * use is to obtain the default dTSEC configuration parameters.
+ * - Change dtsec configuration in &dtsec_cfg. This structure will be used
+ * to customize the dTSEC behavior.
+ * - fman_dtsec_init() - Applies the configuration on dTSEC hardware. Note that
+ * dTSEC is initialized while both Tx and Rx are disabled.
+ * - fman_dtsec_set_mac_address() - Set the station address (mac address).
+ * This is used by dTSEC to match against received packets.
+ *
+ * - fman_dtsec_adjust_link() - Set the link speed and duplex parameters
+ * after the PHY establishes the link.
+ * - dtsec_enable_tx() and dtsec_enable_rx() to enable transmission and
+ * reception.
+ */
+
+/* dTSEC Graceful stop
+ * Tx graceful stop is not supported due to the following errata:
+ * P4080 - DTSEC_A004
+ * All other devices - DTSEC_A0014
+ * To temporary stop dTSEC activity use fman_dtsec_stop_rx().
+ * Note that this function requests dTSEC graceful stop but return before
+ * this stop is complete. To query for graceful stop completion use
+ * fman_dtsec_get_event() and check DTSEC_IEVENT_GRSC bis.
+ * Alternatively the dTSEC interrupt mask can be set to enable graceful stop
+ * interrupts.
+ * To resume operation after graceful stop use fman_dtsec_start_tx() and
+ * fman_dtsec_start_rx().
+ */
+
+/* dTSEC interrupt handling
+ *
+ * This code does not provide an interrupt handler for dTSEC. Instead this
+ * handler should be implemented and registered to the operating system by the
+ * caller. Some primitives for accessing the event status and mask registers
+ * are provided.
+ * See "dTSEC Events" section for a list of events that dTSEC can generate.
+ */
+
+/* dTSEC Events
+ * Interrupt events cause dTSEC event bits to be set. Software may poll the
+ * event register at any time to check for pending interrupts. If an event
+ * occurs and its corresponding enable bit is set in the interrupt mask
+ * register, the event also causes a hardware interrupt at the PIC.
+ * To poll for event status use the fman_dtsec_get_event() function.
+ * To configure the interrupt mask use fman_dtsec_enable_interrupt() and
+ * fman_dtsec_disable_interrupt() functions.
+ * After servicing a dTSEC interrupt use fman_dtsec_ack_event to reset the
+ * serviced event bit.
+ * The following events may be signaled by dTSEC hardware:
+ * %DTSEC_IEVENT_BABR - Babbling receive error. This bit indicates that
+ * a frame was received with length in excess of the MAC's maximum frame length
+ * register.
+ * %DTSEC_IEVENT_RXC - Receive control (pause frame) interrupt. A pause
+ * control frame was received while Rx pause frame handling is enabled.
+ * Also see fman_dtsec_handle_rx_pause().
+ * %DTSEC_IEVENT_MSRO - MIB counter overflow. The count for one of the MIB
+ * counters has exceeded the size of its register.
+ * %DTSEC_IEVENT_GTSC - Graceful transmit stop complete. Graceful stop is now
+ * complete. The transmitter is in a stopped state, in which only pause frames
+ * can be transmitted.
+ * Also see fman_dtsec_stop_tx().
+ * %DTSEC_IEVENT_BABT - Babbling transmit error. The transmitted frame length
+ * has exceeded the value in the MAC's Maximum Frame Length register.
+ * %DTSEC_IEVENT_TXC - Transmit control (pause frame) interrupt. his bit
+ * indicates that a control frame was transmitted.
+ * %DTSEC_IEVENT_TXE - Transmit error. This bit indicates that an error
+ * occurred on the transmitted channel. This bit is set whenever any transmit
+ * error occurs which causes the dTSEC to discard all or part of a frame
+ * (LC, CRL, XFUN).
+ * %DTSEC_IEVENT_LC - Late collision. This bit indicates that a collision
+ * occurred beyond the collision window (slot time) in half-duplex mode.
+ * The frame is truncated with a bad CRC and the remainder of the frame
+ * is discarded.
+ * %DTSEC_IEVENT_CRL - Collision retry limit. is bit indicates that the number
+ * of successive transmission collisions has exceeded the MAC's half-duplex
+ * register's retransmission maximum count. The frame is discarded without
+ * being transmitted and transmission of the next frame commences. This only
+ * occurs while in half-duplex mode.
+ * The number of retransmit attempts can be set in
+ * &dtsec_halfdup_cfg.retransmit before calling fman_dtsec_init().
+ * %DTSEC_IEVENT_XFUN - Transmit FIFO underrun. This bit indicates that the
+ * transmit FIFO became empty before the complete frame was transmitted.
+ * The frame is truncated with a bad CRC and the remainder of the frame is
+ * discarded.
+ * %DTSEC_IEVENT_MAG - TBD
+ * %DTSEC_IEVENT_MMRD - MII management read completion.
+ * %DTSEC_IEVENT_MMWR - MII management write completion.
+ * %DTSEC_IEVENT_GRSC - Graceful receive stop complete. It allows the user to
+ * know if the system has completed the stop and it is safe to write to receive
+ * registers (status, control or configuration registers) that are used by the
+ * system during normal operation.
+ * %DTSEC_IEVENT_TDPE - Internal data error on transmit. This bit indicates
+ * that the dTSEC has detected a parity error on its stored transmit data, which
+ * is likely to compromise the validity of recently transferred frames.
+ * %DTSEC_IEVENT_RDPE - Internal data error on receive. This bit indicates that
+ * the dTSEC has detected a parity error on its stored receive data, which is
+ * likely to compromise the validity of recently transferred frames.
+ */
+/* Interrupt Mask Register (IMASK) */
+#define DTSEC_IMASK_BREN 0x80000000
+#define DTSEC_IMASK_RXCEN 0x40000000
+#define DTSEC_IMASK_MSROEN 0x04000000
+#define DTSEC_IMASK_GTSCEN 0x02000000
+#define DTSEC_IMASK_BTEN 0x01000000
+#define DTSEC_IMASK_TXCEN 0x00800000
+#define DTSEC_IMASK_TXEEN 0x00400000
+#define DTSEC_IMASK_LCEN 0x00040000
+#define DTSEC_IMASK_CRLEN 0x00020000
+#define DTSEC_IMASK_XFUNEN 0x00010000
+#define DTSEC_IMASK_ABRTEN 0x00008000
+#define DTSEC_IMASK_IFERREN 0x00004000
+#define DTSEC_IMASK_MAGEN 0x00000800
+#define DTSEC_IMASK_MMRDEN 0x00000400
+#define DTSEC_IMASK_MMWREN 0x00000200
+#define DTSEC_IMASK_GRSCEN 0x00000100
+#define DTSEC_IMASK_TDPEEN 0x00000002
+#define DTSEC_IMASK_RDPEEN 0x00000001
+
+#define DTSEC_EVENTS_MASK \
+ ((u32)(DTSEC_IMASK_BREN | \
+ DTSEC_IMASK_RXCEN | \
+ DTSEC_IMASK_BTEN | \
+ DTSEC_IMASK_TXCEN | \
+ DTSEC_IMASK_TXEEN | \
+ DTSEC_IMASK_ABRTEN | \
+ DTSEC_IMASK_LCEN | \
+ DTSEC_IMASK_CRLEN | \
+ DTSEC_IMASK_XFUNEN | \
+ DTSEC_IMASK_IFERREN | \
+ DTSEC_IMASK_MAGEN | \
+ DTSEC_IMASK_TDPEEN | \
+ DTSEC_IMASK_RDPEEN))
+
+/* dtsec timestamp event bits */
+#define TMR_PEMASK_TSREEN 0x00010000
+#define TMR_PEVENT_TSRE 0x00010000
+
+/* Group address bit indication */
+#define MAC_GROUP_ADDRESS 0x0000010000000000ULL
+/* size in bytes of L2 address */
+#define MAC_ADDRLEN 6
+
+#define DEFAULT_HALFDUP_ON false
+#define DEFAULT_HALFDUP_RETRANSMIT 0xf
+#define DEFAULT_HALFDUP_COLL_WINDOW 0x37
+#define DEFAULT_HALFDUP_EXCESS_DEFER true
+#define DEFAULT_HALFDUP_NO_BACKOFF false
+#define DEFAULT_HALFDUP_BP_NO_BACKOFF false
+#define DEFAULT_HALFDUP_ALT_BACKOFF_VAL 0x0A
+#define DEFAULT_HALFDUP_ALT_BACKOFF_EN false
+#define DEFAULT_RX_DROP_BCAST false
+#define DEFAULT_RX_SHORT_FRM true
+#define DEFAULT_RX_LEN_CHECK false
+#define DEFAULT_TX_PAD_CRC true
+#define DEFAULT_TX_CRC false
+#define DEFAULT_RX_CTRL_ACC false
+#define DEFAULT_TX_PAUSE_TIME 0xf000
+#define DEFAULT_TBIPA 5
+#define DEFAULT_RX_PREPEND 0
+#define DEFAULT_PTP_TSU_EN true
+#define DEFAULT_PTP_EXCEPTION_EN true
+#define DEFAULT_PREAMBLE_LEN 7
+#define DEFAULT_RX_PREAMBLE false
+#define DEFAULT_TX_PREAMBLE false
+#define DEFAULT_LOOPBACK false
+#define DEFAULT_RX_TIME_STAMP_EN false
+#define DEFAULT_TX_TIME_STAMP_EN false
+#define DEFAULT_RX_FLOW true
+#define DEFAULT_TX_FLOW true
+#define DEFAULT_RX_GROUP_HASH_EXD false
+#define DEFAULT_TX_PAUSE_TIME_EXTD 0
+#define DEFAULT_RX_PROMISC false
+#define DEFAULT_NON_BACK_TO_BACK_IPG1 0x40
+#define DEFAULT_NON_BACK_TO_BACK_IPG2 0x60
+#define DEFAULT_MIN_IFG_ENFORCEMENT 0x50
+#define DEFAULT_BACK_TO_BACK_IPG 0x60
+#define DEFAULT_MAXIMUM_FRAME 0x600
+#define DEFAULT_TBI_PHY_ADDR 5
+#define DEFAULT_WAKE_ON_LAN false
+
+/* register related defines (bits, field offsets..) */
+#define DTSEC_ID1_ID 0xffff0000
+#define DTSEC_ID1_REV_MJ 0x0000FF00
+#define DTSEC_ID1_REV_MN 0x000000ff
+
+#define DTSEC_ID2_INT_REDUCED_OFF 0x00010000
+#define DTSEC_ID2_INT_NORMAL_OFF 0x00020000
+
+#define DTSEC_ECNTRL_CLRCNT 0x00004000
+#define DTSEC_ECNTRL_AUTOZ 0x00002000
+#define DTSEC_ECNTRL_STEN 0x00001000
+#define DTSEC_ECNTRL_CFG_RO 0x80000000
+#define DTSEC_ECNTRL_GMIIM 0x00000040
+#define DTSEC_ECNTRL_TBIM 0x00000020
+#define DTSEC_ECNTRL_SGMIIM 0x00000002
+#define DTSEC_ECNTRL_RPM 0x00000010
+#define DTSEC_ECNTRL_R100M 0x00000008
+#define DTSEC_ECNTRL_RMM 0x00000004
+#define DTSEC_ECNTRL_QSGMIIM 0x00000001
+
+#define DTSEC_TCTRL_THDF 0x00000800
+#define DTSEC_TCTRL_TTSE 0x00000040
+#define DTSEC_TCTRL_GTS 0x00000020
+#define DTSEC_TCTRL_TFC_PAUSE 0x00000010
+
+#define RCTRL_PAL_MASK 0x001f0000
+#define RCTRL_PAL_SHIFT 16
+#define RCTRL_CFA 0x00008000
+#define RCTRL_GHTX 0x00000400
+#define RCTRL_RTSE 0x00000040
+#define RCTRL_GRS 0x00000020
+#define RCTRL_BC_REJ 0x00000010
+#define RCTRL_MPROM 0x00000008
+#define RCTRL_RSF 0x00000004
+#define RCTRL_UPROM 0x00000001
+#define RCTRL_PROM (RCTRL_UPROM | RCTRL_MPROM)
+
+#define TMR_CTL_ESFDP 0x00000800
+#define TMR_CTL_ESFDE 0x00000400
+
+#define MACCFG1_SOFT_RESET 0x80000000
+#define MACCFG1_LOOPBACK 0x00000100
+#define MACCFG1_RX_FLOW 0x00000020
+#define MACCFG1_TX_FLOW 0x00000010
+#define MACCFG1_TX_EN 0x00000001
+#define MACCFG1_RX_EN 0x00000004
+
+#define MACCFG2_NIBBLE_MODE 0x00000100
+#define MACCFG2_BYTE_MODE 0x00000200
+#define MACCFG2_PRE_AM_RX_EN 0x00000080
+#define MACCFG2_PRE_AM_TX_EN 0x00000040
+#define MACCFG2_LENGTH_CHECK 0x00000010
+#define MACCFG2_MAGIC_PACKET_EN 0x00000008
+#define MACCFG2_PAD_CRC_EN 0x00000004
+#define MACCFG2_CRC_EN 0x00000002
+#define MACCFG2_FULL_DUPLEX 0x00000001
+#define MACCFG2_PREAMBLE_LENGTH_MASK 0x0000f000
+#define MACCFG2_PREAMBLE_LENGTH_SHIFT 12
+
+#define IPGIFG_NON_BACK_TO_BACK_IPG_1_SHIFT 24
+#define IPGIFG_NON_BACK_TO_BACK_IPG_2_SHIFT 16
+#define IPGIFG_MIN_IFG_ENFORCEMENT_SHIFT 8
+
+#define IPGIFG_NON_BACK_TO_BACK_IPG_1 0x7F000000
+#define IPGIFG_NON_BACK_TO_BACK_IPG_2 0x007F0000
+#define IPGIFG_MIN_IFG_ENFORCEMENT 0x0000FF00
+#define IPGIFG_BACK_TO_BACK_IPG 0x0000007F
+
+#define HAFDUP_ALT_BEB 0x00080000
+#define HAFDUP_BP_NO_BACKOFF 0x00040000
+#define HAFDUP_NO_BACKOFF 0x00020000
+#define HAFDUP_EXCESS_DEFER 0x00010000
+#define HAFDUP_COLLISION_WINDOW 0x000003ff
+#define HAFDUP_ALTERNATE_BEB_TRUNCATION_MASK 0x00f00000
+#define HAFDUP_ALTERNATE_BEB_TRUNCATION_SHIFT 20
+#define HAFDUP_RETRANSMISSION_MAX_SHIFT 12
+#define HAFDUP_RETRANSMISSION_MAX 0x0000f000
+
+#define NUM_OF_HASH_REGS 8 /* Number of hash table registers */
+
+#define PTV_PTE_MASK 0xffff0000
+#define PTV_PT_MASK 0x0000ffff
+#define PTV_PTE_SHIFT 16
+
+/* CAR1/2 bits */
+#define DTSEC_CAR1_TR64 0x80000000
+#define DTSEC_CAR1_TR127 0x40000000
+#define DTSEC_CAR1_TR255 0x20000000
+#define DTSEC_CAR1_TR511 0x10000000
+#define DTSEC_CAR1_TRK1 0x08000000
+#define DTSEC_CAR1_TRMAX 0x04000000
+#define DTSEC_CAR1_TRMGV 0x02000000
+
+#define DTSEC_CAR1_RBYT 0x00010000
+#define DTSEC_CAR1_RPKT 0x00008000
+#define DTSEC_CAR1_RFCS 0x00004000
+#define DTSEC_CAR1_RMCA 0x00002000
+#define DTSEC_CAR1_RBCA 0x00001000
+#define DTSEC_CAR1_RXCF 0x00000800
+#define DTSEC_CAR1_RXPF 0x00000400
+#define DTSEC_CAR1_RXUO 0x00000200
+#define DTSEC_CAR1_RALN 0x00000100
+#define DTSEC_CAR1_RFLR 0x00000080
+#define DTSEC_CAR1_RCDE 0x00000040
+#define DTSEC_CAR1_RCSE 0x00000020
+#define DTSEC_CAR1_RUND 0x00000010
+#define DTSEC_CAR1_ROVR 0x00000008
+#define DTSEC_CAR1_RFRG 0x00000004
+#define DTSEC_CAR1_RJBR 0x00000002
+#define DTSEC_CAR1_RDRP 0x00000001
+
+#define DTSEC_CAR2_TJBR 0x00080000
+#define DTSEC_CAR2_TFCS 0x00040000
+#define DTSEC_CAR2_TXCF 0x00020000
+#define DTSEC_CAR2_TOVR 0x00010000
+#define DTSEC_CAR2_TUND 0x00008000
+#define DTSEC_CAR2_TFRG 0x00004000
+#define DTSEC_CAR2_TBYT 0x00002000
+#define DTSEC_CAR2_TPKT 0x00001000
+#define DTSEC_CAR2_TMCA 0x00000800
+#define DTSEC_CAR2_TBCA 0x00000400
+#define DTSEC_CAR2_TXPF 0x00000200
+#define DTSEC_CAR2_TDFR 0x00000100
+#define DTSEC_CAR2_TEDF 0x00000080
+#define DTSEC_CAR2_TSCL 0x00000040
+#define DTSEC_CAR2_TMCL 0x00000020
+#define DTSEC_CAR2_TLCL 0x00000010
+#define DTSEC_CAR2_TXCL 0x00000008
+#define DTSEC_CAR2_TNCL 0x00000004
+#define DTSEC_CAR2_TDRP 0x00000001
+
+/* memory map */
+struct dtsec_regs {
+ /* dTSEC General Control and Status Registers */
+ u32 tsec_id; /* 0x000 ETSEC_ID register */
+ u32 tsec_id2; /* 0x004 ETSEC_ID2 register */
+ u32 ievent; /* 0x008 Interrupt event register */
+ u32 imask; /* 0x00C Interrupt mask register */
+ u32 reserved0010[1];
+ u32 ecntrl; /* 0x014 E control register */
+ u32 ptv; /* 0x018 Pause time value register */
+ u32 tbipa; /* 0x01C TBI PHY address register */
+ u32 tmr_ctrl; /* 0x020 Time-stamp Control register */
+ u32 tmr_pevent; /* 0x024 Time-stamp event register */
+ u32 tmr_pemask; /* 0x028 Timer event mask register */
+ u32 reserved002c[5];
+ u32 tctrl; /* 0x040 Transmit control register */
+ u32 reserved0044[3];
+ u32 rctrl; /* 0x050 Receive control register */
+ u32 reserved0054[11];
+ u32 igaddr[8]; /* 0x080-0x09C Individual/group address */
+ u32 gaddr[8]; /* 0x0A0-0x0BC Group address registers 0-7 */
+ u32 reserved00c0[16];
+ u32 maccfg1; /* 0x100 MAC configuration #1 */
+ u32 maccfg2; /* 0x104 MAC configuration #2 */
+ u32 ipgifg; /* 0x108 IPG/IFG */
+ u32 hafdup; /* 0x10C Half-duplex */
+ u32 maxfrm; /* 0x110 Maximum frame */
+ u32 reserved0114[10];
+ u32 ifstat; /* 0x13C Interface status */
+ u32 macstnaddr1; /* 0x140 Station Address,part 1 */
+ u32 macstnaddr2; /* 0x144 Station Address,part 2 */
+ struct {
+ u32 exact_match1; /* octets 1-4 */
+ u32 exact_match2; /* octets 5-6 */
+ } macaddr[15]; /* 0x148-0x1BC mac exact match addresses 1-15 */
+ u32 reserved01c0[16];
+ u32 tr64; /* 0x200 Tx and Rx 64 byte frame counter */
+ u32 tr127; /* 0x204 Tx and Rx 65 to 127 byte frame counter */
+ u32 tr255; /* 0x208 Tx and Rx 128 to 255 byte frame counter */
+ u32 tr511; /* 0x20C Tx and Rx 256 to 511 byte frame counter */
+ u32 tr1k; /* 0x210 Tx and Rx 512 to 1023 byte frame counter */
+ u32 trmax; /* 0x214 Tx and Rx 1024 to 1518 byte frame counter */
+ u32 trmgv;
+ /* 0x218 Tx and Rx 1519 to 1522 byte good VLAN frame count */
+ u32 rbyt; /* 0x21C receive byte counter */
+ u32 rpkt; /* 0x220 receive packet counter */
+ u32 rfcs; /* 0x224 receive FCS error counter */
+ u32 rmca; /* 0x228 RMCA Rx multicast packet counter */
+ u32 rbca; /* 0x22C Rx broadcast packet counter */
+ u32 rxcf; /* 0x230 Rx control frame packet counter */
+ u32 rxpf; /* 0x234 Rx pause frame packet counter */
+ u32 rxuo; /* 0x238 Rx unknown OP code counter */
+ u32 raln; /* 0x23C Rx alignment error counter */
+ u32 rflr; /* 0x240 Rx frame length error counter */
+ u32 rcde; /* 0x244 Rx code error counter */
+ u32 rcse; /* 0x248 Rx carrier sense error counter */
+ u32 rund; /* 0x24C Rx undersize packet counter */
+ u32 rovr; /* 0x250 Rx oversize packet counter */
+ u32 rfrg; /* 0x254 Rx fragments counter */
+ u32 rjbr; /* 0x258 Rx jabber counter */
+ u32 rdrp; /* 0x25C Rx drop */
+ u32 tbyt; /* 0x260 Tx byte counter */
+ u32 tpkt; /* 0x264 Tx packet counter */
+ u32 tmca; /* 0x268 Tx multicast packet counter */
+ u32 tbca; /* 0x26C Tx broadcast packet counter */
+ u32 txpf; /* 0x270 Tx pause control frame counter */
+ u32 tdfr; /* 0x274 Tx deferral packet counter */
+ u32 tedf; /* 0x278 Tx excessive deferral packet counter */
+ u32 tscl; /* 0x27C Tx single collision packet counter */
+ u32 tmcl; /* 0x280 Tx multiple collision packet counter */
+ u32 tlcl; /* 0x284 Tx late collision packet counter */
+ u32 txcl; /* 0x288 Tx excessive collision packet counter */
+ u32 tncl; /* 0x28C Tx total collision counter */
+ u32 reserved0290[1];
+ u32 tdrp; /* 0x294 Tx drop frame counter */
+ u32 tjbr; /* 0x298 Tx jabber frame counter */
+ u32 tfcs; /* 0x29C Tx FCS error counter */
+ u32 txcf; /* 0x2A0 Tx control frame counter */
+ u32 tovr; /* 0x2A4 Tx oversize frame counter */
+ u32 tund; /* 0x2A8 Tx undersize frame counter */
+ u32 tfrg; /* 0x2AC Tx fragments frame counter */
+ u32 car1; /* 0x2B0 carry register one register* */
+ u32 car2; /* 0x2B4 carry register two register* */
+ u32 cam1; /* 0x2B8 carry register one mask register */
+ u32 cam2; /* 0x2BC carry register two mask register */
+ u32 reserved02c0[848];
+};
+
+/* struct dtsec_cfg - dTSEC configuration
+ * Transmit half-duplex flow control, under software
+ * control for 10/100-Mbps half-duplex media. If set,
+ * back pressure is applied to media by raising carrier.
+ * halfdup_retransmit:
+ * Number of retransmission attempts following a collision.
+ * If this is exceeded dTSEC aborts transmission due to
+ * excessive collisions. The standard specifies the
+ * attempt limit to be 15.
+ * halfdup_coll_window:
+ * The number of bytes of the frame during which
+ * collisions may occur. The default value of 55
+ * corresponds to the frame byte at the end of the
+ * standard 512-bit slot time window. If collisions are
+ * detected after this byte, the late collision event is
+ * asserted and transmission of current frame is aborted.
+ * rx_drop_bcast:
+ * Discard broadcast frames. If set, all broadcast frames
+ * will be discarded by dTSEC.
+ * rx_short_frm:
+ * Accept short frames. If set, dTSEC will accept frames
+ * of length 14..63 bytes.
+ * rx_len_check:
+ * Length check for received frames. If set, the MAC
+ * checks the frame's length field on receive to ensure it
+ * matches the actual data field length. This only works
+ * for received frames with length field less than 1500.
+ * No check is performed for larger frames.
+ * tx_pad_crc:
+ * Pad and append CRC. If set, the MAC pads all
+ * transmitted short frames and appends a CRC to every
+ * frame regardless of padding requirement.
+ * tx_crc:
+ * Transmission CRC enable. If set, the MAC appends a CRC
+ * to all frames. If frames presented to the MAC have a
+ * valid length and contain a valid CRC, tx_crc should be
+ * reset.
+ * This field is ignored if tx_pad_crc is set.
+ * rx_ctrl_acc:
+ * Control frame accept. If set, this overrides 802.3
+ * standard control frame behavior, and all Ethernet frames
+ * that have an ethertype of 0x8808 are treated as normal
+ * Ethernet frames and passed up to the packet interface on
+ * a DA match. Received pause control frames are passed to
+ * the packet interface only if Rx flow control is also
+ * disabled. See fman_dtsec_handle_rx_pause() function.
+ * tx_pause_time:
+ * Transmit pause time value. This pause value is used as
+ * part of the pause frame to be sent when a transmit pause
+ * frame is initiated. If set to 0 this disables
+ * transmission of pause frames.
+ * rx_preamble:
+ * Receive preamble enable. If set, the MAC recovers the
+ * received Ethernet 7-byte preamble and passes it to the
+ * packet interface at the start of each received frame.
+ * This field should be reset for internal MAC loop-back
+ * mode.
+ * tx_preamble: User defined preamble enable for transmitted frames.
+ * If set, a user-defined preamble must passed to the MAC
+ * and it is transmitted instead of the standard preamble.
+ * preamble_len:
+ * Length, in bytes, of the preamble field preceding each
+ * Ethernet start-of-frame delimiter byte. The default
+ * value of 0x7 should be used in order to guarantee
+ * reliable operation with IEEE 802.3 compliant hardware.
+ * rx_prepend:
+ * Packet alignment padding length. The specified number
+ * of bytes (1-31) of zero padding are inserted before the
+ * start of each received frame. For Ethernet, where
+ * optional preamble extraction is enabled, the padding
+ * appears before the preamble, otherwise the padding
+ * precedes the layer 2 header.
+ *
+ * This structure contains basic dTSEC configuration and must be passed to
+ * fman_dtsec_init() function. A default set of configuration values can be
+ * obtained by calling fman_dtsec_defconfig().
+ */
+struct dtsec_cfg {
+ bool halfdup_on;
+ bool halfdup_alt_backoff_en;
+ bool halfdup_excess_defer;
+ bool halfdup_no_backoff;
+ bool halfdup_bp_no_backoff;
+ u32 halfdup_alt_backoff_val;
+ u16 halfdup_retransmit;
+ u16 halfdup_coll_window;
+ bool rx_drop_bcast;
+ bool rx_short_frm;
+ bool rx_len_check;
+ bool tx_pad_crc;
+ bool tx_crc;
+ bool rx_ctrl_acc;
+ u16 tx_pause_time;
+ u16 tbipa;
+ bool ptp_tsu_en;
+ bool ptp_exception_en;
+ bool rx_preamble;
+ bool tx_preamble;
+ u32 preamble_len;
+ u32 rx_prepend;
+ bool loopback;
+ bool rx_time_stamp_en;
+ bool tx_time_stamp_en;
+ bool rx_flow;
+ bool tx_flow;
+ bool rx_group_hash_exd;
+ bool rx_promisc;
+ u8 tbi_phy_addr;
+ u16 tx_pause_time_extd;
+ u16 maximum_frame;
+ u32 non_back_to_back_ipg1;
+ u32 non_back_to_back_ipg2;
+ u32 min_ifg_enforcement;
+ u32 back_to_back_ipg;
+ bool wake_on_lan;
+};
+
+/**
+ * fman_dtsec_defconfig() - Get default dTSEC configuration
+ * @cfg: pointer to configuration structure.
+ *
+ * Call this function to obtain a default set of configuration values for
+ * initializing dTSEC. The user can overwrite any of the values before calling
+ * fman_dtsec_init(), if specific configuration needs to be applied.
+ */
+void fman_dtsec_defconfig(struct dtsec_cfg *cfg);
+
+/**
+ * fman_dtsec_init() - Init dTSEC hardware block
+ * @regs: Pointer to dTSEC register block
+ * @cfg: dTSEC configuration data
+ * @iface_mode: dTSEC interface mode, the type of MAC - PHY interface.
+ * @iface_speed: 1G or 10G
+ * @macaddr: MAC station address to be assigned to the device
+ * @fm_rev_maj: major rev number
+ * @fm_rev_min: minor rev number
+ * @exceptions_mask: initial exceptions mask
+ *
+ * This function initializes dTSEC and applies basic configuration.
+ *
+ * dTSEC initialization sequence:
+ * Before enabling Rx/Tx call dtsec_set_address() to set MAC address,
+ * fman_dtsec_adjust_link() to configure interface speed and duplex and finally
+ * dtsec_enable_tx()/dtsec_enable_rx() to start transmission and reception.
+ *
+ * Return: 0 if successful, an error code otherwise.
+ */
+int fman_dtsec_init(struct dtsec_regs __iomem *regs, struct dtsec_cfg *cfg,
+ enum enet_interface iface_mode,
+ enum enet_speed iface_speed,
+ u8 *macaddr, u8 fm_rev_maj,
+ u8 fm_rev_min, u32 exception_mask);
+
+/**
+ * fman_dtsec_enable() - Enable dTSEC Tx and Tx
+ * @regs: Pointer to dTSEC register block
+ * @apply_rx: enable rx side
+ * @apply_tx: enable tx side
+ *
+ * This function resets Tx and Rx graceful stop bit and enables dTSEC Tx and Rx.
+ */
+void fman_dtsec_enable(struct dtsec_regs __iomem *regs, bool apply_rx,
+ bool apply_tx);
+
+/**
+ * fman_dtsec_disable() - Disable dTSEC Tx and Rx
+ * @regs: Pointer to dTSEC register block
+ * @apply_rx: disable rx side
+ * @apply_tx: disable tx side
+ *
+ * This function disables Tx and Rx in dTSEC.
+ */
+void fman_dtsec_disable(struct dtsec_regs __iomem *regs, bool apply_rx,
+ bool apply_tx);
+
+/**
+ * fman_dtsec_get_revision() - Get dTSEC hardware revision
+ * @regs: Pointer to dTSEC register block
+ *
+ * Call this function to obtain the dTSEC hardware version.
+ * Return: dtsec_id content
+ */
+u32 fman_dtsec_get_revision(struct dtsec_regs __iomem *regs);
+
+/**
+ * fman_dtsec_set_mac_address() - Set MAC station address
+ * @regs: Pointer to dTSEC register block
+ * @macaddr: MAC address array
+ *
+ * This function sets MAC station address. To enable unicast reception call
+ * this after fman_dtsec_init(). While promiscuous mode is disabled dTSEC will
+ * match the destination address of received unicast frames against this
+ * address.
+ */
+void fman_dtsec_set_mac_address(struct dtsec_regs __iomem *regs, u8 *macaddr);
+
+/**
+ * fman_dtsec_set_uc_promisc() - Sets unicast promiscuous mode
+ * @regs: Pointer to dTSEC register block
+ * @enable: Enable unicast promiscuous mode
+ *
+ * Use this function to enable/disable dTSEC L2 address filtering. If the
+ * address filtering is disabled all unicast packets are accepted.
+ * To set dTSEC in promiscuous mode call both fman_dtsec_set_uc_promisc() and
+ * fman_dtsec_set_mc_promisc() to disable filtering for both unicast and
+ * multicast addresses.
+ */
+void fman_dtsec_set_uc_promisc(struct dtsec_regs __iomem *regs, bool enable);
+
+/**
+ * fman_dtsec_adjust_link() - Adjust dTSEC speed/duplex settings
+ * @regs: Pointer to dTSEC register block
+ * @iface_mode: dTSEC interface mode
+ * @speed: Link speed
+ * @full_dx: True for full-duplex, false for half-duplex.
+ *
+ * This function configures the MAC to function and the desired rates. Use it
+ * to configure dTSEC after fman_dtsec_init() and whenever the link speed
+ * changes (for instance following PHY auto-negociation).
+ * Returns: 0 if successful, an error code otherwise.
+ */
+int fman_dtsec_adjust_link(struct dtsec_regs __iomem *regs,
+ enum enet_interface iface_mode,
+ enum enet_speed speed, bool full_dx);
+
+/**
+ * fman_dtsec_set_max_frame_len() - Set max frame length
+ * @regs: Pointer to dTSEC register block
+ * @length: Max frame length.
+ *
+ * Sets maximum frame length for received and transmitted frames. Frames that
+ * exceeds this length are truncated.
+ */
+void fman_dtsec_set_max_frame_len(struct dtsec_regs __iomem *regs, u16 length);
+
+/**
+ * fman_dtsec_get_max_frame_len() - Query max frame length
+ * @regs: Pointer to dTSEC register block
+ *
+ * Return: the current value of the maximum frame length.
+ */
+u16 fman_dtsec_get_max_frame_len(struct dtsec_regs __iomem *regs);
+
+/**
+ * fman_dtsec_handle_rx_pause() - Configure pause frame handling
+ * @regs: Pointer to dTSEC register block
+ * @en: Enable pause frame handling in dTSEC
+ *
+ * If enabled, dTSEC will handle pause frames internally. This must be disabled
+ * if dTSEC is set in half-duplex mode.
+ * If pause frame handling is disabled and &dtsec_cfg.rx_ctrl_acc is set, pause
+ * frames will be transferred to the packet interface just like regular Ethernet
+ * frames.
+ */
+void fman_dtsec_handle_rx_pause(struct dtsec_regs __iomem *regs, bool en);
+
+/**
+ * fman_dtsec_set_tx_pause_frames() - Configure Tx pause time
+ * @regs: Pointer to dTSEC register block
+ * @time: Time value included in pause frames
+ *
+ * Call this function to set the time value used in transmitted pause frames.
+ * If time is 0, transmission of pause frames is disabled
+ */
+void fman_dtsec_set_tx_pause_frames(struct dtsec_regs __iomem *regs, u16 time);
+
+/**
+ * fman_dtsec_ack_event() - Acknowledge handled events
+ * @regs: Pointer to dTSEC register block
+ * @ev_mask: Events to acknowledge
+ *
+ * After handling events signaled by dTSEC in either polling or interrupt mode,
+ * call this function to reset the associated status bits in dTSEC event
+ * register.
+ */
+void fman_dtsec_ack_event(struct dtsec_regs __iomem *regs, u32 ev_mask);
+
+/**
+ * fman_dtsec_get_event() - Returns currently asserted events
+ * @regs: Pointer to dTSEC register block
+ * @ev_mask: Mask of relevant events
+ *
+ * Call this function to obtain a bit-mask of events that are currently asserted
+ * in dTSEC, taken from IEVENT register.
+ * Returns: a bit-mask of events asserted in dTSEC.
+ */
+u32 fman_dtsec_get_event(struct dtsec_regs __iomem *regs, u32 ev_mask);
+
+/**
+ * fman_dtsec_get_interrupt_mask() - Returns a bit-mask of enabled interrupts
+ * @regs: Pointer to dTSEC register block
+ *
+ * Call this function to obtain a bit-mask of enabled interrupts
+ * in dTSEC, taken from IMASK register.
+ * Returns: a bit-mask of enabled interrupts in dTSEC.
+ */
+u32 fman_dtsec_get_interrupt_mask(struct dtsec_regs __iomem *regs);
+
+void fman_dtsec_enable_tmr_interrupt(struct dtsec_regs __iomem *regs);
+
+void fman_dtsec_disable_tmr_interrupt(struct dtsec_regs __iomem *regs);
+
+/**
+ * fman_dtsec_disable_interrupt() - Disables interrupts for the specified events
+ * @regs: Pointer to dTSEC register block
+ * @ev_mask: Mask of relevant events
+ *
+ * Call this function to disable interrupts in dTSEC for the specified events.
+ * To enable interrupts use fman_dtsec_enable_interrupt().
+ */
+void fman_dtsec_disable_interrupt(struct dtsec_regs __iomem *regs, u32 ev_mask);
+
+/**
+ * fman_dtsec_enable_interrupt() - Enable interrupts for the specified events
+ * @regs: Pointer to dTSEC register block
+ * @ev_mask: Mask of relevant events
+ *
+ * Call this function to enable interrupts in dTSEC for the specified events.
+ * To disable interrupts use fman_dtsec_disable_interrupt().
+ */
+void fman_dtsec_enable_interrupt(struct dtsec_regs __iomem *regs, u32 ev_mask);
+
+/**
+ * fman_dtsec_set_bucket() - Enables/disables a filter bucket
+ * @regs: Pointer to dTSEC register block
+ * @bucket: Bucket index
+ * @enable: true/false to enable/disable this bucket
+ *
+ * This function enables or disables the specified bucket. Enabling a bucket
+ * associated with an address configures dTSEC to accept received packets
+ * with that destination address.
+ * Multiple addresses may be associated with the same bucket. Disabling a
+ * bucket will affect all addresses associated with that bucket. A bucket that
+ * is enabled requires further filtering and verification in the upper layers
+ */
+void fman_dtsec_set_bucket(struct dtsec_regs __iomem *regs, int bucket,
+ bool enable);
+
+/**
+ * fman_dtsec_set_mc_promisc() - Set multicast promiscuous mode
+ * @regs: Pointer to dTSEC register block
+ * @enable: Enable multicast promiscuous mode
+ *
+ * Call this to enable/disable L2 address filtering for multicast packets.
+ */
+void fman_dtsec_set_mc_promisc(struct dtsec_regs __iomem *regs, bool enable);
+
+/**
+ * fman_dtsec_get_clear_carry_regs() - Read and clear carry bits
+ * @regs: Pointer to dTSEC register block
+ * @car1: car1 register value
+ * @car2: car2 register value
+ *
+ * When set, the carry bits signal that an overflow occurred on the
+ * corresponding counters.
+ * Note that the carry bits (CAR1-2 registers) will assert the
+ * %DTSEC_IEVENT_MSRO interrupt if unmasked (via CAM1-2 regs).
+ * Return: true if overflow occurred, otherwise - false
+ */
+bool fman_dtsec_get_clear_carry_regs(struct dtsec_regs __iomem *regs,
+ u32 *car1, u32 *car2);
+
+u32 fman_dtsec_check_and_clear_tmr_event(struct dtsec_regs __iomem *regs);
+
+void fman_dtsec_start_tx(struct dtsec_regs __iomem *regs);
+void fman_dtsec_start_rx(struct dtsec_regs __iomem *regs);
+void fman_dtsec_stop_rx(struct dtsec_regs __iomem *regs);
+u32 fman_dtsec_get_rctrl(struct dtsec_regs __iomem *regs);
+
+#endif /* __FSL_FMAN_DTSEC_H */
diff --git a/drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec_mii_acc.h b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec_mii_acc.h
new file mode 100644
index 0000000..73e3c16
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_dtsec_mii_acc.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_FMAN_DTSEC_MII_ACC_H
+#define __FSL_FMAN_DTSEC_MII_ACC_H
+
+#include <linux/io.h>
+
+/* MII Management Configuration Register */
+#define MIIMCFG_RESET_MGMT 0x80000000
+#define MIIMCFG_MGNTCLK_MASK 0x00000007
+#define MIIMCFG_MGNTCLK_SHIFT 0
+
+/* MII Management Command Register */
+#define MIIMCOM_SCAN_CYCLE 0x00000002
+#define MIIMCOM_READ_CYCLE 0x00000001
+
+/* MII Management Address Register */
+#define MIIMADD_PHY_ADDR_SHIFT 8
+#define MIIMADD_PHY_ADDR_MASK 0x00001f00
+
+#define MIIMADD_REG_ADDR_SHIFT 0
+#define MIIMADD_REG_ADDR_MASK 0x0000001f
+
+/* MII Management Indicator Register */
+#define MIIMIND_BUSY 0x00000001
+
+/* PHY Control Register */
+#define PHY_CR_PHY_RESET 0x8000
+#define PHY_CR_LOOPBACK 0x4000
+#define PHY_CR_SPEED0 0x2000
+#define PHY_CR_ANE 0x1000
+#define PHY_CR_RESET_AN 0x0200
+#define PHY_CR_FULLDUPLEX 0x0100
+#define PHY_CR_SPEED1 0x0040
+
+#define PHY_TBICON_SRESET 0x8000
+#define PHY_TBICON_SPEED2 0x0020
+#define PHY_TBICON_CLK_SEL 0x0020
+#define PHY_TBIANA_SGMII 0x4001
+#define PHY_TBIANA_1000X 0x01a0
+/* register map */
+
+/* MII Configuration Control Memory Map Registers */
+struct dtsec_mii_reg {
+ u32 reserved1[72];
+ u32 miimcfg; /* MII Mgmt:configuration */
+ u32 miimcom; /* MII Mgmt:command */
+ u32 miimadd; /* MII Mgmt:address */
+ u32 miimcon; /* MII Mgmt:control 3 */
+ u32 miimstat; /* MII Mgmt:status */
+ u32 miimind; /* MII Mgmt:indicators */
+};
+
+void fman_dtsec_mii_init(struct dtsec_mii_reg __iomem *regs, u16 dtsec_freq);
+int fman_dtsec_mii_write_reg(struct dtsec_mii_reg __iomem *regs, u8 addr,
+ u8 reg, u16 data, u16 dtsec_freq);
+int fman_dtsec_mii_read_reg(struct dtsec_mii_reg __iomem *regs, u8 addr,
+ u8 reg, u16 *data, u16 dtsec_freq);
+
+#endif /* __FSL_FMAN_DTSEC_MII_ACC_H */
diff --git a/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac.h b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac.h
new file mode 100644
index 0000000..f8641d4
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac.h
@@ -0,0 +1,428 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_FMAN_MEMAC_H
+#define __FSL_FMAN_MEMAC_H
+
+#include <linux/io.h>
+
+#include "fsl_enet.h"
+/* Num of additional exact match MAC adr regs */
+#define MEMAC_NUM_OF_PADDRS 7
+
+/* Control and Configuration Register (COMMAND_CONFIG) */
+/* 00 Magic Packet detection */
+#define CMD_CFG_MG 0x80000000
+/* 07 Rx low power indication */
+#define CMD_CFG_REG_LOWP_RXETY 0x01000000
+/* 08 Tx Low Power Idle Enable */
+#define CMD_CFG_TX_LOWP_ENA 0x00800000
+/* 10 Disable SFD check */
+#define CMD_CFG_SFD_ANY 0x00200000
+/* 12 Enable PFC */
+#define CMD_CFG_PFC_MODE 0x00080000
+/* 14 Payload length check disable */
+#define CMD_CFG_NO_LEN_CHK 0x00020000
+/* 15 Force idle generation */
+#define CMD_CFG_SEND_IDLE 0x00010000
+/* 18 Control frame rx enable */
+#define CMD_CFG_CNT_FRM_EN 0x00002000
+/* 19 S/W Reset, self clearing bit */
+#define CMD_CFG_SW_RESET 0x00001000
+/* 20 Enable Tx padding of frames */
+#define CMD_CFG_TX_PAD_EN 0x00000800
+/* 21 XGMII/GMII loopback enable */
+#define CMD_CFG_LOOPBACK_EN 0x00000400
+/* 22 Tx source MAC addr insertion */
+#define CMD_CFG_TX_ADDR_INS 0x00000200
+/* 23 Ignore Pause frame quanta */
+#define CMD_CFG_PAUSE_IGNORE 0x00000100
+/* 24 Terminate/frwd Pause frames */
+#define CMD_CFG_PAUSE_FWD 0x00000080
+/* 25 Terminate/frwd CRC of frames */
+#define CMD_CFG_CRC_FWD 0x00000040
+/* 26 Frame padding removal */
+#define CMD_CFG_PAD_EN 0x00000020
+/* 27 Promiscuous operation enable */
+#define CMD_CFG_PROMIS_EN 0x00000010
+/* 28 WAN mode enable */
+#define CMD_CFG_WAN_MODE 0x00000008
+/* 30 MAC receive path enable */
+#define CMD_CFG_RX_EN 0x00000002
+/* 31 MAC transmit path enable */
+#define CMD_CFG_TX_EN 0x00000001
+
+/* Transmit FIFO Sections Register (TX_FIFO_SECTIONS) */
+#define TX_FIFO_SECTIONS_TX_EMPTY_MASK 0xFFFF0000
+#define TX_FIFO_SECTIONS_TX_AVAIL_MASK 0x0000FFFF
+#define TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_10G 0x00400000
+#define TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_1G 0x00100000
+#define TX_FIFO_SECTIONS_TX_EMPTY_PFC_10G 0x00360000
+#define TX_FIFO_SECTIONS_TX_EMPTY_PFC_1G 0x00040000
+#define TX_FIFO_SECTIONS_TX_AVAIL_10G 0x00000019
+#define TX_FIFO_SECTIONS_TX_AVAIL_1G 0x00000020
+#define TX_FIFO_SECTIONS_TX_AVAIL_SLOW_10G 0x00000060
+
+#define GET_TX_EMPTY_DEFAULT_VALUE(_val) \
+do { \
+ _val &= ~TX_FIFO_SECTIONS_TX_EMPTY_MASK; \
+ ((_val == TX_FIFO_SECTIONS_TX_AVAIL_10G) ? \
+ (_val |= TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_10G) :\
+ (_val |= TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_1G));\
+} while (0)
+
+#define GET_TX_EMPTY_PFC_VALUE(_val) \
+do { \
+ _val &= ~TX_FIFO_SECTIONS_TX_EMPTY_MASK; \
+ ((_val == TX_FIFO_SECTIONS_TX_AVAIL_10G) ? \
+ (_val |= TX_FIFO_SECTIONS_TX_EMPTY_PFC_10G) : \
+ (_val |= TX_FIFO_SECTIONS_TX_EMPTY_PFC_1G)); \
+} while (0)
+
+/* Interface Mode Register (IF_MODE) */
+/* 30-31 Mask on i/f mode bits */
+#define IF_MODE_MASK 0x00000003
+/* 30-31 XGMII (10G) interface */
+#define IF_MODE_XGMII 0x00000000
+/* 30-31 GMII (1G) interface */
+#define IF_MODE_GMII 0x00000002
+#define IF_MODE_RGMII 0x00000004
+#define IF_MODE_RGMII_AUTO 0x00008000
+#define IF_MODE_RGMII_1000 0x00004000 /* 10 - 1000Mbps RGMII */
+#define IF_MODE_RGMII_100 0x00000000 /* 00 - 100Mbps RGMII */
+#define IF_MODE_RGMII_10 0x00002000 /* 01 - 10Mbps RGMII */
+#define IF_MODE_RGMII_SP_MASK 0x00006000 /* Setsp mask bits */
+#define IF_MODE_RGMII_FD 0x00001000 /* Full duplex RGMII */
+#define IF_MODE_HD 0x00000040 /* Half duplex operation */
+
+/* Hash table Control Register (HASHTABLE_CTRL) */
+#define HASH_CTRL_MCAST_SHIFT 26
+/* 23 Mcast frame rx for hash */
+#define HASH_CTRL_MCAST_EN 0x00000100
+/* 26-31 Hash table address code */
+#define HASH_CTRL_ADDR_MASK 0x0000003F
+/* MAC mcast indication */
+#define GROUP_ADDRESS 0x0000010000000000LL
+#define HASH_TABLE_SIZE 64 /* Hash tbl size */
+
+/* Transmit Inter-Packet Gap Length Register (TX_IPG_LENGTH) */
+#define MEMAC_TX_IPG_LENGTH_MASK 0x0000003F
+
+/* Statistics Configuration Register (STATN_CONFIG) */
+#define STATS_CFG_CLR 0x00000004 /* 29 Reset all counters */
+#define STATS_CFG_CLR_ON_RD 0x00000002 /* 30 Clear on read */
+/* 31 Saturate at the maximum val */
+#define STATS_CFG_SATURATE 0x00000001
+
+/* Interrupt Mask Register (IMASK) */
+/* 1 Magic pkt detect indication */
+#define MEMAC_IMASK_MGI 0x40000000
+/* 2 Timestamp FIFO ECC error evnt */
+#define MEMAC_IMASK_TSECC_ER 0x20000000
+/* 6 Transmit frame ECC error evnt */
+#define MEMAC_IMASK_TECC_ER 0x02000000
+/* 7 Receive frame ECC error evnt */
+#define MEMAC_IMASK_RECC_ER 0x01000000
+
+#define MEMAC_ALL_ERRS_IMASK \
+ ((u32)(MEMAC_IMASK_TSECC_ER | \
+ MEMAC_IMASK_TECC_ER | \
+ MEMAC_IMASK_RECC_ER | \
+ MEMAC_IMASK_MGI))
+
+/* PCS (XG). Link sync (G) */
+#define MEMAC_IEVNT_PCS 0x80000000
+/* Auto-negotiation */
+#define MEMAC_IEVNT_AN 0x40000000
+/* Link Training/New page */
+#define MEMAC_IEVNT_LT 0x20000000
+/* Magic pkt detection */
+#define MEMAC_IEVNT_MGI 0x00004000
+/* Timestamp FIFO ECC error */
+#define MEMAC_IEVNT_TS_ECC_ER 0x00002000
+/* Rx FIFO overflow */
+#define MEMAC_IEVNT_RX_FIFO_OVFL 0x00001000
+/* Tx FIFO underflow */
+#define MEMAC_IEVNT_TX_FIFO_UNFL 0x00000800
+/* Tx FIFO overflow */
+#define MEMAC_IEVNT_TX_FIFO_OVFL 0x00000400
+/* Tx frame ECC error */
+#define MEMAC_IEVNT_TX_ECC_ER 0x00000200
+/* Rx frame ECC error */
+#define MEMAC_IEVNT_RX_ECC_ER 0x00000100
+/* Link Interruption flt */
+#define MEMAC_IEVNT_LI_FAULT 0x00000080
+/* Rx FIFO empty */
+#define MEMAC_IEVNT_RX_EMPTY 0x00000040
+/* Tx FIFO empty */
+#define MEMAC_IEVNT_TX_EMPTY 0x00000020
+/* Low Power Idle */
+#define MEMAC_IEVNT_RX_LOWP 0x00000010
+/* Phy loss of signal */
+#define MEMAC_IEVNT_PHY_LOS 0x00000004
+/* Remote fault (XGMII) */
+#define MEMAC_IEVNT_REM_FAULT 0x00000002
+/* Local fault (XGMII) */
+#define MEMAC_IEVNT_LOC_FAULT 0x00000001
+
+#define DEFAULT_PAUSE_QUANTA 0xf000
+#define DEFAULT_FRAME_LENGTH 0x600
+#define DEFAULT_TX_IPG_LENGTH 12
+
+#define CLXY_PAUSE_QUANTA_CLX_PQNT 0x0000FFFF
+#define CLXY_PAUSE_QUANTA_CLY_PQNT 0xFFFF0000
+#define CLXY_PAUSE_THRESH_CLX_QTH 0x0000FFFF
+#define CLXY_PAUSE_THRESH_CLY_QTH 0xFFFF0000
+
+struct mac_addr {
+ /* Lower 32 bits of 48-bit MAC address */
+ u32 mac_addr_l;
+ /* Upper 16 bits of 48-bit MAC address */
+ u32 mac_addr_u;
+};
+
+/* memory map */
+struct memac_regs {
+ u32 res0000[2]; /* General Control and Status */
+ u32 command_config; /* 0x008 Ctrl and cfg */
+ struct mac_addr mac_addr0; /* 0x00C-0x010 MAC_ADDR_0...1 */
+ u32 maxfrm; /* 0x014 Max frame length */
+ u32 res0018[1];
+ u32 rx_fifo_sections; /* Receive FIFO configuration reg */
+ u32 tx_fifo_sections; /* Transmit FIFO configuration reg */
+ u32 res0024[2];
+ u32 hashtable_ctrl; /* 0x02C Hash table control */
+ u32 res0030[4];
+ u32 ievent; /* 0x040 Interrupt event */
+ u32 tx_ipg_length; /* 0x044 Transmitter inter-packet-gap */
+ u32 res0048;
+ u32 imask; /* 0x04C Interrupt mask */
+ u32 res0050;
+ u32 pause_quanta[4]; /* 0x054 Pause quanta */
+ u32 pause_thresh[4]; /* 0x064 Pause quanta threshold */
+ u32 rx_pause_status; /* 0x074 Receive pause status */
+ u32 res0078[2];
+ struct mac_addr mac_addr[MEMAC_NUM_OF_PADDRS];/* 0x80-0x0B4 mac padr */
+ u32 lpwake_timer; /* 0x0B8 Low Power Wakeup Timer */
+ u32 sleep_timer; /* 0x0BC Transmit EEE Low Power Timer */
+ u32 res00c0[8];
+ u32 statn_config; /* 0x0E0 Statistics configuration */
+ u32 res00e4[7];
+ /* Rx Statistics Counter */
+ u32 reoct_l;
+ u32 reoct_u;
+ u32 roct_l;
+ u32 roct_u;
+ u32 raln_l;
+ u32 raln_u;
+ u32 rxpf_l;
+ u32 rxpf_u;
+ u32 rfrm_l;
+ u32 rfrm_u;
+ u32 rfcs_l;
+ u32 rfcs_u;
+ u32 rvlan_l;
+ u32 rvlan_u;
+ u32 rerr_l;
+ u32 rerr_u;
+ u32 ruca_l;
+ u32 ruca_u;
+ u32 rmca_l;
+ u32 rmca_u;
+ u32 rbca_l;
+ u32 rbca_u;
+ u32 rdrp_l;
+ u32 rdrp_u;
+ u32 rpkt_l;
+ u32 rpkt_u;
+ u32 rund_l;
+ u32 rund_u;
+ u32 r64_l;
+ u32 r64_u;
+ u32 r127_l;
+ u32 r127_u;
+ u32 r255_l;
+ u32 r255_u;
+ u32 r511_l;
+ u32 r511_u;
+ u32 r1023_l;
+ u32 r1023_u;
+ u32 r1518_l;
+ u32 r1518_u;
+ u32 r1519x_l;
+ u32 r1519x_u;
+ u32 rovr_l;
+ u32 rovr_u;
+ u32 rjbr_l;
+ u32 rjbr_u;
+ u32 rfrg_l;
+ u32 rfrg_u;
+ u32 rcnp_l;
+ u32 rcnp_u;
+ u32 rdrntp_l;
+ u32 rdrntp_u;
+ u32 res01d0[12];
+ /* Tx Statistics Counter */
+ u32 teoct_l;
+ u32 teoct_u;
+ u32 toct_l;
+ u32 toct_u;
+ u32 res0210[2];
+ u32 txpf_l;
+ u32 txpf_u;
+ u32 tfrm_l;
+ u32 tfrm_u;
+ u32 tfcs_l;
+ u32 tfcs_u;
+ u32 tvlan_l;
+ u32 tvlan_u;
+ u32 terr_l;
+ u32 terr_u;
+ u32 tuca_l;
+ u32 tuca_u;
+ u32 tmca_l;
+ u32 tmca_u;
+ u32 tbca_l;
+ u32 tbca_u;
+ u32 res0258[2];
+ u32 tpkt_l;
+ u32 tpkt_u;
+ u32 tund_l;
+ u32 tund_u;
+ u32 t64_l;
+ u32 t64_u;
+ u32 t127_l;
+ u32 t127_u;
+ u32 t255_l;
+ u32 t255_u;
+ u32 t511_l;
+ u32 t511_u;
+ u32 t1023_l;
+ u32 t1023_u;
+ u32 t1518_l;
+ u32 t1518_u;
+ u32 t1519x_l;
+ u32 t1519x_u;
+ u32 res02a8[6];
+ u32 tcnp_l;
+ u32 tcnp_u;
+ u32 res02c8[14];
+ /* Line Interface Control */
+ u32 if_mode; /* 0x300 Interface Mode Control */
+ u32 if_status; /* 0x304 Interface Status */
+ u32 res0308[14];
+ /* HiGig/2 */
+ u32 hg_config; /* 0x340 Control and cfg */
+ u32 res0344[3];
+ u32 hg_pause_quanta; /* 0x350 Pause quanta */
+ u32 res0354[3];
+ u32 hg_pause_thresh; /* 0x360 Pause quanta threshold */
+ u32 res0364[3];
+ u32 hgrx_pause_status; /* 0x370 Receive pause status */
+ u32 hg_fifos_status; /* 0x374 fifos status */
+ u32 rhm; /* 0x378 rx messages counter */
+ u32 thm; /* 0x37C tx messages counter */
+};
+
+struct memac_cfg {
+ bool reset_on_init;
+ bool rx_error_discard;
+ bool pause_ignore;
+ bool pause_forward_enable;
+ bool no_length_check_enable;
+ bool cmd_frame_enable;
+ bool send_idle_enable;
+ bool wan_mode_enable;
+ bool promiscuous_mode_enable;
+ bool tx_addr_ins_enable;
+ bool loopback_enable;
+ bool lgth_check_nostdr;
+ bool time_stamp_enable;
+ bool pad_enable;
+ bool phy_tx_ena_on;
+ bool rx_sfd_any;
+ bool rx_pbl_fwd;
+ bool tx_pbl_fwd;
+ bool debug_mode;
+ bool wake_on_lan;
+ u16 max_frame_length;
+ u16 pause_quanta;
+ u32 tx_ipg_length;
+};
+
+void fman_memac_defconfig(struct memac_cfg *cfg);
+
+int fman_memac_init(struct memac_regs __iomem *regs, struct memac_cfg *cfg,
+ enum enet_interface enet_interface,
+ enum enet_speed enet_speed, bool slow_10g_if,
+ u32 exceptions);
+
+void fman_memac_enable(struct memac_regs __iomem *regs, bool apply_rx,
+ bool apply_tx);
+
+void fman_memac_disable(struct memac_regs __iomem *regs, bool apply_rx,
+ bool apply_tx);
+
+void fman_memac_set_promiscuous(struct memac_regs __iomem *regs, bool val);
+
+void fman_memac_add_addr_in_paddr(struct memac_regs __iomem *regs,
+ u8 *adr, u8 paddr_num);
+
+void fman_memac_clear_addr_in_paddr(struct memac_regs __iomem *regs,
+ u8 paddr_num);
+
+void fman_memac_set_tx_pause_frames(struct memac_regs __iomem *regs,
+ u8 priority, u16 pause_time,
+ u16 thresh_time);
+
+u16 fman_memac_get_max_frame_len(struct memac_regs __iomem *regs);
+
+void fman_memac_set_exception(struct memac_regs __iomem *regs, u32 val,
+ bool enable);
+
+int fman_memac_reset(struct memac_regs __iomem *regs);
+
+void fman_memac_set_hash_table(struct memac_regs __iomem *regs, u32 val);
+
+void fman_memac_set_rx_ignore_pause_frames(struct memac_regs __iomem *regs,
+ bool enable);
+
+u32 fman_memac_get_event(struct memac_regs __iomem *regs, u32 ev_mask);
+
+void fman_memac_ack_event(struct memac_regs __iomem *regs, u32 ev_mask);
+
+u32 fman_memac_get_interrupt_mask(struct memac_regs __iomem *regs);
+
+void fman_memac_adjust_link(struct memac_regs __iomem *regs,
+ enum enet_interface iface_mode,
+ enum enet_speed speed, bool full_dx);
+
+#endif /* __FSL_FMAN_MEMAC_H */
diff --git a/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac_mii_acc.h b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac_mii_acc.h
new file mode 100644
index 0000000..66ecc1e
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_memac_mii_acc.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_FMAN_MEMAC_MII_ACC_H
+#define __FSL_FMAN_MEMAC_MII_ACC_H
+
+#include <linux/io.h>
+
+#include "fsl_enet.h"
+/* MII Management Registers */
+#define MDIO_CFG_CLK_DIV_MASK 0x0080ff80
+#define MDIO_CFG_HOLD_MASK 0x0000001c
+#define MDIO_CFG_ENC45 0x00000040
+#define MDIO_CFG_READ_ERR 0x00000002
+#define MDIO_CFG_BSY 0x00000001
+
+#define MDIO_CTL_PHY_ADDR_SHIFT 5
+#define MDIO_CTL_READ 0x00008000
+
+#define MDIO_DATA_BSY 0x80000000
+
+/* MEMAC Internal PHY Registers - SGMII */
+#define PHY_SGMII_CR_PHY_RESET 0x8000
+#define PHY_SGMII_CR_RESET_AN 0x0200
+#define PHY_SGMII_CR_DEF_VAL 0x1140
+#define PHY_SGMII_DEV_ABILITY_SGMII 0x4001
+#define PHY_SGMII_DEV_ABILITY_1000X 0x01A0
+#define PHY_SGMII_IF_MODE_AN 0x0002
+#define PHY_SGMII_IF_MODE_SGMII 0x0001
+#define PHY_SGMII_IF_MODE_1000X 0x0000
+
+/* MII Configuration Control Memory Map Registers */
+struct memac_mii_access_mem_map {
+ u32 mdio_cfg; /* 0x030 */
+ u32 mdio_ctrl; /* 0x034 */
+ u32 mdio_data; /* 0x038 */
+ u32 mdio_addr; /* 0x03c */
+};
+
+int fman_memac_mii_write_phy_reg(struct memac_mii_access_mem_map __iomem
+ *mii_regs, u8 phy_addr, u8 reg, u16 data,
+ enum enet_speed enet_speed);
+
+#endif /* __MAC_API_MEMAC_MII_ACC_H */
diff --git a/drivers/net/ethernet/freescale/fman/flib/fsl_fman_tgec.h b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_tgec.h
new file mode 100644
index 0000000..7b63ec0
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/flib/fsl_fman_tgec.h
@@ -0,0 +1,393 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_FMAN_TGEC_H
+#define __FSL_FMAN_TGEC_H
+
+#include <linux/io.h>
+
+#include "fsl_enet.h"
+
+/* Transmit Inter-Packet Gap Length Register (TX_IPG_LENGTH) */
+#define TGEC_TX_IPG_LENGTH_MASK 0x000003ff
+
+/* Command and Configuration Register (COMMAND_CONFIG) */
+#define CMD_CFG_EN_TIMESTAMP 0x00100000
+#define CMD_CFG_TX_ADDR_INS_SEL 0x00080000
+#define CMD_CFG_NO_LEN_CHK 0x00020000
+#define CMD_CFG_SEND_IDLE 0x00010000
+#define CMD_CFG_RX_ER_DISC 0x00004000
+#define CMD_CFG_CMD_FRM_EN 0x00002000
+#define CMD_CFG_STAT_CLR 0x00001000
+#define CMD_CFG_LOOPBACK_EN 0x00000400
+#define CMD_CFG_TX_ADDR_INS 0x00000200
+#define CMD_CFG_PAUSE_IGNORE 0x00000100
+#define CMD_CFG_PAUSE_FWD 0x00000080
+#define CMF_CFG_CRC_FWD 0x00000040
+#define CMD_CFG_PROMIS_EN 0x00000010
+#define CMD_CFG_WAN_MODE 0x00000008
+#define CMD_CFG_RX_EN 0x00000002
+#define CMD_CFG_TX_EN 0x00000001
+
+/* Interrupt Mask Register (IMASK) */
+#define TGEC_IMASK_MDIO_SCAN_EVENT 0x00010000
+#define TGEC_IMASK_MDIO_CMD_CMPL 0x00008000
+#define TGEC_IMASK_REM_FAULT 0x00004000
+#define TGEC_IMASK_LOC_FAULT 0x00002000
+#define TGEC_IMASK_TX_ECC_ER 0x00001000
+#define TGEC_IMASK_TX_FIFO_UNFL 0x00000800
+#define TGEC_IMASK_TX_FIFO_OVFL 0x00000400
+#define TGEC_IMASK_TX_ER 0x00000200
+#define TGEC_IMASK_RX_FIFO_OVFL 0x00000100
+#define TGEC_IMASK_RX_ECC_ER 0x00000080
+#define TGEC_IMASK_RX_JAB_FRM 0x00000040
+#define TGEC_IMASK_RX_OVRSZ_FRM 0x00000020
+#define TGEC_IMASK_RX_RUNT_FRM 0x00000010
+#define TGEC_IMASK_RX_FRAG_FRM 0x00000008
+#define TGEC_IMASK_RX_LEN_ER 0x00000004
+#define TGEC_IMASK_RX_CRC_ER 0x00000002
+#define TGEC_IMASK_RX_ALIGN_ER 0x00000001
+
+#define TGEC_EVENTS_MASK \
+ ((u32)(TGEC_IMASK_MDIO_SCAN_EVENT | \
+ TGEC_IMASK_MDIO_CMD_CMPL | \
+ TGEC_IMASK_REM_FAULT | \
+ TGEC_IMASK_LOC_FAULT | \
+ TGEC_IMASK_TX_ECC_ER | \
+ TGEC_IMASK_TX_FIFO_UNFL | \
+ TGEC_IMASK_TX_FIFO_OVFL | \
+ TGEC_IMASK_TX_ER | \
+ TGEC_IMASK_RX_FIFO_OVFL | \
+ TGEC_IMASK_RX_ECC_ER | \
+ TGEC_IMASK_RX_JAB_FRM | \
+ TGEC_IMASK_RX_OVRSZ_FRM | \
+ TGEC_IMASK_RX_RUNT_FRM | \
+ TGEC_IMASK_RX_FRAG_FRM | \
+ TGEC_IMASK_RX_LEN_ER | \
+ TGEC_IMASK_RX_CRC_ER | \
+ TGEC_IMASK_RX_ALIGN_ER))
+
+/* Hashtable Control Register (HASHTABLE_CTRL) */
+#define TGEC_HASH_MCAST_SHIFT 23
+#define TGEC_HASH_MCAST_EN 0x00000200
+#define TGEC_HASH_ADR_MSK 0x000001ff
+
+#define DEFAULT_WAN_MODE_ENABLE false
+#define DEFAULT_PROMISCUOUS_MODE_ENABLE false
+#define DEFAULT_PAUSE_FORWARD_ENABLE false
+#define DEFAULT_PAUSE_IGNORE false
+#define DEFAULT_TX_ADDR_INS_ENABLE false
+#define DEFAULT_LOOPBACK_ENABLE false
+#define DEFAULT_CMD_FRAME_ENABLE false
+#define DEFAULT_RX_ERROR_DISCARD false
+#define DEFAULT_SEND_IDLE_ENABLE false
+#define DEFAULT_NO_LENGTH_CHECK_ENABLE true
+#define DEFAULT_LGTH_CHECK_NOSTDR false
+#define DEFAULT_TIME_STAMP_ENABLE false
+#define DEFAULT_TX_IPG_LENGTH 12
+#define DEFAULT_MAX_FRAME_LENGTH 0x600
+#define DEFAULT_PAUSE_QUANT 0xf000
+
+/* 10G memory map */
+struct tgec_regs {
+ u32 tgec_id; /* 0x000 Controller ID */
+ u32 reserved001[1]; /* 0x004 */
+ u32 command_config; /* 0x008 Control and configuration */
+ u32 mac_addr_0; /* 0x00c Lower 32 bits of the MAC adr */
+ u32 mac_addr_1; /* 0x010 Upper 16 bits of the MAC adr */
+ u32 maxfrm; /* 0x014 Maximum frame length */
+ u32 pause_quant; /* 0x018 Pause quanta */
+ u32 rx_fifo_sections; /* 0x01c */
+ u32 tx_fifo_sections; /* 0x020 */
+ u32 rx_fifo_almost_f_e; /* 0x024 */
+ u32 tx_fifo_almost_f_e; /* 0x028 */
+ u32 hashtable_ctrl; /* 0x02c Hash table control */
+ u32 mdio_cfg_status; /* 0x030 */
+ u32 mdio_command; /* 0x034 */
+ u32 mdio_data; /* 0x038 */
+ u32 mdio_regaddr; /* 0x03c */
+ u32 status; /* 0x040 */
+ u32 tx_ipg_len; /* 0x044 Transmitter inter-packet-gap */
+ u32 mac_addr_2; /* 0x048 Lower 32 bits of 2nd MAC adr */
+ u32 mac_addr_3; /* 0x04c Upper 16 bits of 2nd MAC adr */
+ u32 rx_fifo_ptr_rd; /* 0x050 */
+ u32 rx_fifo_ptr_wr; /* 0x054 */
+ u32 tx_fifo_ptr_rd; /* 0x058 */
+ u32 tx_fifo_ptr_wr; /* 0x05c */
+ u32 imask; /* 0x060 Interrupt mask */
+ u32 ievent; /* 0x064 Interrupt event */
+ u32 udp_port; /* 0x068 Defines a UDP Port number */
+ u32 type_1588v2; /* 0x06c Type field for 1588v2 */
+ u32 reserved070[4]; /* 0x070 */
+ /* 10Ge Statistics Counter */
+ u32 tfrm_u; /* 80 aFramesTransmittedOK */
+ u32 tfrm_l; /* 84 aFramesTransmittedOK */
+ u32 rfrm_u; /* 88 aFramesReceivedOK */
+ u32 rfrm_l; /* 8c aFramesReceivedOK */
+ u32 rfcs_u; /* 90 aFrameCheckSequenceErrors */
+ u32 rfcs_l; /* 94 aFrameCheckSequenceErrors */
+ u32 raln_u; /* 98 aAlignmentErrors */
+ u32 raln_l; /* 9c aAlignmentErrors */
+ u32 txpf_u; /* A0 aPAUSEMACCtrlFramesTransmitted */
+ u32 txpf_l; /* A4 aPAUSEMACCtrlFramesTransmitted */
+ u32 rxpf_u; /* A8 aPAUSEMACCtrlFramesReceived */
+ u32 rxpf_l; /* Ac aPAUSEMACCtrlFramesReceived */
+ u32 rlong_u; /* B0 aFrameTooLongErrors */
+ u32 rlong_l; /* B4 aFrameTooLongErrors */
+ u32 rflr_u; /* B8 aInRangeLengthErrors */
+ u32 rflr_l; /* Bc aInRangeLengthErrors */
+ u32 tvlan_u; /* C0 VLANTransmittedOK */
+ u32 tvlan_l; /* C4 VLANTransmittedOK */
+ u32 rvlan_u; /* C8 VLANReceivedOK */
+ u32 rvlan_l; /* Cc VLANReceivedOK */
+ u32 toct_u; /* D0 if_out_octets */
+ u32 toct_l; /* D4 if_out_octets */
+ u32 roct_u; /* D8 if_in_octets */
+ u32 roct_l; /* Dc if_in_octets */
+ u32 ruca_u; /* E0 if_in_ucast_pkts */
+ u32 ruca_l; /* E4 if_in_ucast_pkts */
+ u32 rmca_u; /* E8 ifInMulticastPkts */
+ u32 rmca_l; /* Ec ifInMulticastPkts */
+ u32 rbca_u; /* F0 ifInBroadcastPkts */
+ u32 rbca_l; /* F4 ifInBroadcastPkts */
+ u32 terr_u; /* F8 if_out_errors */
+ u32 terr_l; /* Fc if_out_errors */
+ u32 reserved100[2]; /* 100-108 */
+ u32 tuca_u; /* 108 if_out_ucast_pkts */
+ u32 tuca_l; /* 10c if_out_ucast_pkts */
+ u32 tmca_u; /* 110 ifOutMulticastPkts */
+ u32 tmca_l; /* 114 ifOutMulticastPkts */
+ u32 tbca_u; /* 118 ifOutBroadcastPkts */
+ u32 tbca_l; /* 11c ifOutBroadcastPkts */
+ u32 rdrp_u; /* 120 etherStatsDropEvents */
+ u32 rdrp_l; /* 124 etherStatsDropEvents */
+ u32 reoct_u; /* 128 etherStatsOctets */
+ u32 reoct_l; /* 12c etherStatsOctets */
+ u32 rpkt_u; /* 130 etherStatsPkts */
+ u32 rpkt_l; /* 134 etherStatsPkts */
+ u32 trund_u; /* 138 etherStatsUndersizePkts */
+ u32 trund_l; /* 13c etherStatsUndersizePkts */
+ u32 r64_u; /* 140 etherStatsPkts64Octets */
+ u32 r64_l; /* 144 etherStatsPkts64Octets */
+ u32 r127_u; /* 148 etherStatsPkts65to127Octets */
+ u32 r127_l; /* 14c etherStatsPkts65to127Octets */
+ u32 r255_u; /* 150 etherStatsPkts128to255Octets */
+ u32 r255_l; /* 154 etherStatsPkts128to255Octets */
+ u32 r511_u; /* 158 etherStatsPkts256to511Octets */
+ u32 r511_l; /* 15c etherStatsPkts256to511Octets */
+ u32 r1023_u; /* 160 etherStatsPkts512to1023Octets */
+ u32 r1023_l; /* 164 etherStatsPkts512to1023Octets */
+ u32 r1518_u; /* 168 etherStatsPkts1024to1518Octets */
+ u32 r1518_l; /* 16c etherStatsPkts1024to1518Octets */
+ u32 r1519x_u; /* 170 etherStatsPkts1519toX */
+ u32 r1519x_l; /* 174 etherStatsPkts1519toX */
+ u32 trovr_u; /* 178 etherStatsOversizePkts */
+ u32 trovr_l; /* 17c etherStatsOversizePkts */
+ u32 trjbr_u; /* 180 etherStatsJabbers */
+ u32 trjbr_l; /* 184 etherStatsJabbers */
+ u32 trfrg_u; /* 188 etherStatsFragments */
+ u32 trfrg_l; /* 18C etherStatsFragments */
+ u32 rerr_u; /* 190 if_in_errors */
+ u32 rerr_l; /* 194 if_in_errors */
+};
+
+/**
+ * struct tgec_cfg - TGEC configuration
+ *
+ * @rx_error_discard: Receive Erroneous Frame Discard Enable. When set to 1
+ * any frame received with an error is discarded in the
+ * Core and not forwarded to the Client interface.
+ * When set to 0 (Reset value), erroneous Frames are
+ * forwarded to the Client interface with ff_rx_err
+ * asserted.
+ * @pause_ignore: Ignore Pause Frame Quanta. If set to 1 received pause
+ * frames are ignored by the MAC. When set to 0
+ * (Reset value) the transmit process is stopped for the
+ * amount of time specified in the pause quanta received
+ * within a pause frame.
+ * @pause_forward_enable:
+ * Terminate / Forward Pause Frames. If set to 1 pause
+ * frames are forwarded to the user application. When set
+ * to 0 (Reset value) pause frames are terminated and
+ * discarded within the MAC.
+ * @no_length_check_enable:
+ * Payload Length Check Disable. When set to 0
+ * (Reset value), the Core checks the frame's payload
+ * length with the Frame Length/Type field, when set to 1
+ * the payload length check is disabled.
+ * @cmd_frame_enable: Enables reception of all command frames. When set to 1
+ * all Command Frames are accepted, when set to 0
+ * (Reset Value) only Pause Frames are accepted and all
+ * other Command Frames are rejected.
+ * @send_idle_enable: Force Idle Generation. When set to 1, the MAC
+ * permanently sends XGMII Idle sequences even when faults
+ * are received.
+ * @wan_mode_enable: WAN Mode Enable. Sets WAN mode (1) or LAN mode
+ * (0, default) of operation.
+ * @promiscuous_mode_enable:
+ * Enables MAC promiscuous operation. When set to 1, all
+ * frames are received without any MAC address filtering,
+ * when set to 0 (Reset value) Unicast Frames with a
+ * destination address not matching the Core MAC Address
+ * (MAC Address programmed in Registers MAC_ADDR_0 and
+ * MAC_ADDR_1 or the MAC address programmed in Registers
+ * MAC_ADDR_2 and MAC_ADDR_3) are rejected.
+ * @tx_addr_ins_enable: Set Source MAC Address on Transmit. If set to 1 the
+ * MAC overwrites the source MAC address received from the
+ * Client Interface with one of the MAC addresses. If set
+ * to 0 (Reset value), the source MAC address from the
+ * Client Interface is transmitted unmodified to the line.
+ * @loopback_enable: PHY Interface Loopback. When set to 1, the signal
+ * loop_ena is set to '1', when set to 0 (Reset value)
+ * the signal loop_ena is set to 0.
+ * @lgth_check_nostdr: The Core interprets the Length/Type field differently
+ * depending on the value of this Bit
+ * @time_stamp_enable: This bit selects between enabling and disabling the
+ * IEEE 1588 functionality. 1: IEEE 1588 is enabled
+ * 0: IEEE 1588 is disabled
+ * @max_frame_length: Maximum supported received frame length.
+ * The 10GEC MAC supports reception of any frame size up
+ * to 16,352 bytes (0x3FE0). Typical settings are
+ * 0x05EE (1,518 bytes) for standard frames.
+ * Default setting is 0x0600 (1,536 bytes).
+ * Received frames that exceed this stated maximum
+ * are truncated.
+ * @pause_quant: Pause quanta value used with transmitted pause frames.
+ * Each quanta represents a 512 bit-times.
+ * @tx_ipg_length: Transmit Inter-Packet-Gap (IPG) value. A 6-bit value:
+ * Depending on LAN or WAN mode of operation the value has
+ * the following meaning: - LAN Mode: Number of octets in
+ * steps of 4. Valid values are 8, 12, 16, ... 100. DIC is
+ * fully supported (see 10.6.1 page 49) for any setting. A
+ * default of 12 (reset value) must be set to conform to
+ * IEEE802.3ae. Warning: When set to 8, PCS layers may not
+ * be able to perform clock rate compensation. - WAN Mode:
+ * Stretch factor. Valid values are 4..15. The stretch
+ * factor is calculated as (value+1)*8. A default of 12
+ * (reset value) must be set to conform to IEEE 802.3ae
+ * (i.e. 13*8=104). A larger value shrinks the IPG
+ * (increasing bandwidth).
+ *
+ * This structure contains basic TGEC configuration and must be passed to
+ * fman_tgec_init() function. A default set of configuration values can be
+ * obtained by calling fman_tgec_defconfig().
+ */
+struct tgec_cfg {
+ bool rx_error_discard;
+ bool pause_ignore;
+ bool pause_forward_enable;
+ bool no_length_check_enable;
+ bool cmd_frame_enable;
+ bool send_idle_enable;
+ bool wan_mode_enable;
+ bool promiscuous_mode_enable;
+ bool tx_addr_ins_enable;
+ bool loopback_enable;
+ bool lgth_check_nostdr;
+ bool time_stamp_enable;
+ u16 max_frame_length;
+ u16 pause_quant;
+ u32 tx_ipg_length;
+};
+
+void fman_tgec_defconfig(struct tgec_cfg *cfg);
+
+/**
+ * fman_tgec_init() - Init tgec hardware block
+ * @regs: Pointer to tgec register block
+ * @cfg: tgec configuration data
+ * @exceptions_mask: initial exceptions mask
+ *
+ * This function initializes the tgec controller and applies its
+ * basic configuration.
+ *
+ * Return: 0 if successful, an error code otherwise.
+ */
+int fman_tgec_init(struct tgec_regs __iomem *regs, struct tgec_cfg *cfg,
+ u32 exception_mask);
+
+void fman_tgec_enable(struct tgec_regs __iomem *regs, bool apply_rx,
+ bool apply_tx);
+
+void fman_tgec_disable(struct tgec_regs __iomem *regs, bool apply_rx,
+ bool apply_tx);
+
+u32 fman_tgec_get_revision(struct tgec_regs __iomem *regs);
+
+void fman_tgec_set_mac_address(struct tgec_regs __iomem *regs, u8 *macaddr);
+
+void fman_tgec_set_promiscuous(struct tgec_regs __iomem *regs, bool val);
+
+/**
+ * fman_tgec_set_hash_table() - Sets the Hashtable Control Register
+ * @regs: Pointer to TGEC register block
+ * @value: Value to be written in Hashtable Control Register
+ */
+void fman_tgec_set_hash_table(struct tgec_regs __iomem *regs, u32 value);
+
+/**
+ * fman_tgec_set_tx_pause_frames() - Sets the Pause Quanta Register
+ * @regs: Pointer to TGEC register block
+ * @pause_time: Pause quanta value used with transmitted pause frames.
+ *
+ * Each quanta represents a 512 bit-times
+ */
+void fman_tgec_set_tx_pause_frames(struct tgec_regs __iomem *regs,
+ u16 pause_time);
+
+/**
+ * fman_tgec_set_rx_ignore_pause_frames()
+ * @regs: Pointer to TGEC register block
+ * @en: Ignore/Respond to pause frame quanta
+ *
+ * Changes the policy WRT pause frames
+ * Sets the value of PAUSE_IGNORE field in the COMMAND_CONFIG Register
+ * 0 - MAC stops transmit process for the duration specified
+ * in the Pause frame quanta of a received Pause frame.
+ * 1 - MAC ignores received Pause frames.
+ */
+void fman_tgec_set_rx_ignore_pause_frames(struct tgec_regs __iomem *regs,
+ bool en);
+
+u32 fman_tgec_get_event(struct tgec_regs __iomem *regs, u32 ev_mask);
+
+void fman_tgec_ack_event(struct tgec_regs __iomem *regs, u32 ev_mask);
+
+u32 fman_tgec_get_interrupt_mask(struct tgec_regs __iomem *regs);
+
+void fman_tgec_enable_interrupt(struct tgec_regs __iomem *regs, u32 ev_mask);
+
+void fman_tgec_disable_interrupt(struct tgec_regs __iomem *regs, u32 ev_mask);
+
+void fman_tgec_set_erratum_tx_fifo_corruption_10gmac_a007(struct tgec_regs
+ __iomem *regs);
+
+#endif /* __FSL_FMAN_TGEC_H */
diff --git a/drivers/net/ethernet/freescale/fman/mac/Makefile b/drivers/net/ethernet/freescale/fman/mac/Makefile
new file mode 100644
index 0000000..ce03e25
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/mac/Makefile
@@ -0,0 +1,5 @@
+obj-y += fsl_fman_mac.o
+
+fsl_fman_mac-objs := fman_dtsec.o fman_dtsec_mii_acc.o \
+ fman_memac.o fman_memac_mii_acc.o \
+ fman_tgec.o
diff --git a/drivers/net/ethernet/freescale/fman/mac/fman_dtsec.c b/drivers/net/ethernet/freescale/fman/mac/fman_dtsec.c
new file mode 100644
index 0000000..610ca45
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/mac/fman_dtsec.c
@@ -0,0 +1,503 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "fsl_fman_dtsec.h"
+
+void fman_dtsec_stop_rx(struct dtsec_regs __iomem *regs)
+{
+ /* Assert the graceful stop bit */
+ iowrite32be(ioread32be(®s->rctrl) | RCTRL_GRS, ®s->rctrl);
+}
+
+void fman_dtsec_start_tx(struct dtsec_regs __iomem *regs)
+{
+ /* clear the graceful stop bit */
+ iowrite32be(ioread32be(®s->tctrl) & ~DTSEC_TCTRL_GTS, ®s->tctrl);
+}
+
+void fman_dtsec_start_rx(struct dtsec_regs __iomem *regs)
+{
+ /* clear the graceful stop bit */
+ iowrite32be(ioread32be(®s->rctrl) & ~RCTRL_GRS, ®s->rctrl);
+}
+
+void fman_dtsec_defconfig(struct dtsec_cfg *cfg)
+{
+ cfg->halfdup_on = DEFAULT_HALFDUP_ON;
+ cfg->halfdup_retransmit = DEFAULT_HALFDUP_RETRANSMIT;
+ cfg->halfdup_coll_window = DEFAULT_HALFDUP_COLL_WINDOW;
+ cfg->halfdup_excess_defer = DEFAULT_HALFDUP_EXCESS_DEFER;
+ cfg->halfdup_no_backoff = DEFAULT_HALFDUP_NO_BACKOFF;
+ cfg->halfdup_bp_no_backoff = DEFAULT_HALFDUP_BP_NO_BACKOFF;
+ cfg->halfdup_alt_backoff_val = DEFAULT_HALFDUP_ALT_BACKOFF_VAL;
+ cfg->halfdup_alt_backoff_en = DEFAULT_HALFDUP_ALT_BACKOFF_EN;
+ cfg->rx_drop_bcast = DEFAULT_RX_DROP_BCAST;
+ cfg->rx_short_frm = DEFAULT_RX_SHORT_FRM;
+ cfg->rx_len_check = DEFAULT_RX_LEN_CHECK;
+ cfg->tx_pad_crc = DEFAULT_TX_PAD_CRC;
+ cfg->tx_crc = DEFAULT_TX_CRC;
+ cfg->rx_ctrl_acc = DEFAULT_RX_CTRL_ACC;
+ cfg->tx_pause_time = DEFAULT_TX_PAUSE_TIME;
+ /* PHY address 0 is reserved (DPAA RM) */
+ cfg->tbipa = DEFAULT_TBIPA;
+ cfg->rx_prepend = DEFAULT_RX_PREPEND;
+ cfg->ptp_tsu_en = DEFAULT_PTP_TSU_EN;
+ cfg->ptp_exception_en = DEFAULT_PTP_EXCEPTION_EN;
+ cfg->preamble_len = DEFAULT_PREAMBLE_LEN;
+ cfg->rx_preamble = DEFAULT_RX_PREAMBLE;
+ cfg->tx_preamble = DEFAULT_TX_PREAMBLE;
+ cfg->loopback = DEFAULT_LOOPBACK;
+ cfg->rx_time_stamp_en = DEFAULT_RX_TIME_STAMP_EN;
+ cfg->tx_time_stamp_en = DEFAULT_TX_TIME_STAMP_EN;
+ cfg->rx_flow = DEFAULT_RX_FLOW;
+ cfg->tx_flow = DEFAULT_TX_FLOW;
+ cfg->rx_group_hash_exd = DEFAULT_RX_GROUP_HASH_EXD;
+ cfg->tx_pause_time_extd = DEFAULT_TX_PAUSE_TIME_EXTD;
+ cfg->rx_promisc = DEFAULT_RX_PROMISC;
+ cfg->non_back_to_back_ipg1 = DEFAULT_NON_BACK_TO_BACK_IPG1;
+ cfg->non_back_to_back_ipg2 = DEFAULT_NON_BACK_TO_BACK_IPG2;
+ cfg->min_ifg_enforcement = DEFAULT_MIN_IFG_ENFORCEMENT;
+ cfg->back_to_back_ipg = DEFAULT_BACK_TO_BACK_IPG;
+ cfg->maximum_frame = DEFAULT_MAXIMUM_FRAME;
+ cfg->tbi_phy_addr = DEFAULT_TBI_PHY_ADDR;
+ cfg->wake_on_lan = DEFAULT_WAKE_ON_LAN;
+}
+
+int fman_dtsec_init(struct dtsec_regs __iomem *regs, struct dtsec_cfg *cfg,
+ enum enet_interface iface_mode,
+ enum enet_speed iface_speed,
+ u8 *macaddr,
+ u8 __maybe_unused fm_rev_maj,
+ u8 __maybe_unused fm_rev_min, u32 exception_mask)
+{
+ bool is_rgmii, is_sgmii, is_qsgmii;
+ int i;
+ u32 tmp;
+
+ /* Soft reset */
+ iowrite32be(MACCFG1_SOFT_RESET, ®s->maccfg1);
+ iowrite32be(0, ®s->maccfg1);
+
+ /* dtsec_id2 */
+ tmp = ioread32be(®s->tsec_id2);
+
+ /* check RGMII support */
+ if (iface_mode == E_ENET_IF_RGMII || iface_mode == E_ENET_IF_RMII)
+ if (tmp & DTSEC_ID2_INT_REDUCED_OFF)
+ return -EINVAL;
+
+ if (iface_mode == E_ENET_IF_SGMII || iface_mode == E_ENET_IF_MII)
+ if (tmp & DTSEC_ID2_INT_REDUCED_OFF)
+ return -EINVAL;
+
+ is_rgmii = (bool)((iface_mode == E_ENET_IF_RGMII) ? true : false);
+ is_sgmii = (bool)((iface_mode == E_ENET_IF_SGMII) ? true : false);
+ is_qsgmii = (bool)((iface_mode == E_ENET_IF_QSGMII) ? true : false);
+
+ tmp = 0;
+ if (is_rgmii || iface_mode == E_ENET_IF_GMII)
+ tmp |= DTSEC_ECNTRL_GMIIM;
+ if (is_sgmii)
+ tmp |= (DTSEC_ECNTRL_SGMIIM | DTSEC_ECNTRL_TBIM);
+ if (is_qsgmii)
+ tmp |= (DTSEC_ECNTRL_SGMIIM | DTSEC_ECNTRL_TBIM |
+ DTSEC_ECNTRL_QSGMIIM);
+ if (is_rgmii)
+ tmp |= DTSEC_ECNTRL_RPM;
+ if (iface_speed == E_ENET_SPEED_100)
+ tmp |= DTSEC_ECNTRL_R100M;
+
+ iowrite32be(tmp, ®s->ecntrl);
+
+ tmp = 0;
+ if (cfg->halfdup_on)
+ tmp |= DTSEC_TCTRL_THDF;
+ if (cfg->tx_time_stamp_en)
+ tmp |= DTSEC_TCTRL_TTSE;
+
+ iowrite32be(tmp, ®s->tctrl);
+
+ tmp = 0;
+
+ if (cfg->tx_pause_time)
+ tmp |= cfg->tx_pause_time;
+ if (cfg->tx_pause_time_extd)
+ tmp |= cfg->tx_pause_time_extd << PTV_PTE_SHIFT;
+ iowrite32be(tmp, ®s->ptv);
+
+ tmp = 0;
+ tmp |= (cfg->rx_prepend << RCTRL_PAL_SHIFT) & RCTRL_PAL_MASK;
+ if (cfg->rx_ctrl_acc)
+ tmp |= RCTRL_CFA;
+ if (cfg->rx_group_hash_exd)
+ tmp |= RCTRL_GHTX;
+ if (cfg->rx_time_stamp_en)
+ tmp |= RCTRL_RTSE;
+ if (cfg->rx_drop_bcast)
+ tmp |= RCTRL_BC_REJ;
+ if (cfg->rx_short_frm)
+ tmp |= RCTRL_RSF;
+ if (cfg->rx_promisc)
+ tmp |= RCTRL_PROM;
+
+ iowrite32be(tmp, ®s->rctrl);
+
+ /* Assign a Phy Address to the TBI (TBIPA).
+ * Done also in cases where TBI is not selected to avoid conflict with
+ * the external PHY's Physical address
+ */
+ iowrite32be(cfg->tbipa, ®s->tbipa);
+
+ iowrite32be(0, ®s->tmr_ctrl);
+
+ if (cfg->ptp_tsu_en) {
+ tmp = 0;
+ tmp |= TMR_PEVENT_TSRE;
+ iowrite32be(tmp, ®s->tmr_pevent);
+
+ if (cfg->ptp_exception_en) {
+ tmp = 0;
+ tmp |= TMR_PEMASK_TSREEN;
+ iowrite32be(tmp, ®s->tmr_pemask);
+ }
+ }
+
+ tmp = 0;
+ if (cfg->loopback)
+ tmp |= MACCFG1_LOOPBACK;
+ if (cfg->rx_flow)
+ tmp |= MACCFG1_RX_FLOW;
+ if (cfg->tx_flow)
+ tmp |= MACCFG1_TX_FLOW;
+ iowrite32be(tmp, ®s->maccfg1);
+
+ tmp = 0;
+
+ if (iface_speed < E_ENET_SPEED_1000)
+ tmp |= MACCFG2_NIBBLE_MODE;
+ else if (iface_speed == E_ENET_SPEED_1000)
+ tmp |= MACCFG2_BYTE_MODE;
+
+ tmp |= (cfg->preamble_len << MACCFG2_PREAMBLE_LENGTH_SHIFT) &
+ MACCFG2_PREAMBLE_LENGTH_MASK;
+ if (cfg->rx_preamble)
+ tmp |= MACCFG2_PRE_AM_RX_EN;
+ if (cfg->tx_preamble)
+ tmp |= MACCFG2_PRE_AM_TX_EN;
+ if (cfg->rx_len_check)
+ tmp |= MACCFG2_LENGTH_CHECK;
+ if (cfg->tx_pad_crc)
+ tmp |= MACCFG2_PAD_CRC_EN;
+ if (cfg->tx_crc)
+ tmp |= MACCFG2_CRC_EN;
+ if (!cfg->halfdup_on)
+ tmp |= MACCFG2_FULL_DUPLEX;
+ iowrite32be(tmp, ®s->maccfg2);
+
+ tmp = (((cfg->non_back_to_back_ipg1 <<
+ IPGIFG_NON_BACK_TO_BACK_IPG_1_SHIFT)
+ & IPGIFG_NON_BACK_TO_BACK_IPG_1)
+ | ((cfg->non_back_to_back_ipg2 <<
+ IPGIFG_NON_BACK_TO_BACK_IPG_2_SHIFT)
+ & IPGIFG_NON_BACK_TO_BACK_IPG_2)
+ | ((cfg->min_ifg_enforcement << IPGIFG_MIN_IFG_ENFORCEMENT_SHIFT)
+ & IPGIFG_MIN_IFG_ENFORCEMENT)
+ | (cfg->back_to_back_ipg & IPGIFG_BACK_TO_BACK_IPG));
+ iowrite32be(tmp, ®s->ipgifg);
+
+ tmp = 0;
+
+ if (cfg->halfdup_alt_backoff_en)
+ tmp = HAFDUP_ALT_BEB;
+ tmp |= (cfg->halfdup_alt_backoff_val <<
+ HAFDUP_ALTERNATE_BEB_TRUNCATION_SHIFT) &
+ HAFDUP_ALTERNATE_BEB_TRUNCATION_MASK;
+ if (cfg->halfdup_bp_no_backoff)
+ tmp |= HAFDUP_BP_NO_BACKOFF;
+ if (cfg->halfdup_no_backoff)
+ tmp |= HAFDUP_NO_BACKOFF;
+ if (cfg->halfdup_excess_defer)
+ tmp |= HAFDUP_EXCESS_DEFER;
+ tmp |= ((cfg->halfdup_retransmit << HAFDUP_RETRANSMISSION_MAX_SHIFT)
+ & HAFDUP_RETRANSMISSION_MAX);
+ tmp |= (cfg->halfdup_coll_window & HAFDUP_COLLISION_WINDOW);
+
+ iowrite32be(tmp, ®s->hafdup);
+
+ /* Initialize Maximum frame length */
+ iowrite32be(cfg->maximum_frame, ®s->maxfrm);
+
+ iowrite32be(0xffffffff, ®s->cam1);
+ iowrite32be(0xffffffff, ®s->cam2);
+
+ iowrite32be(exception_mask, ®s->imask);
+
+ iowrite32be(0xffffffff, ®s->ievent);
+
+ tmp = (u32)((macaddr[5] << 24) |
+ (macaddr[4] << 16) | (macaddr[3] << 8) | macaddr[2]);
+ iowrite32be(tmp, ®s->macstnaddr1);
+
+ tmp = (u32)((macaddr[1] << 24) | (macaddr[0] << 16));
+ iowrite32be(tmp, ®s->macstnaddr2);
+
+ /* HASH */
+ for (i = 0; i < NUM_OF_HASH_REGS; i++) {
+ /* Initialize IADDRx */
+ iowrite32be(0, ®s->igaddr[i]);
+ /* Initialize GADDRx */
+ iowrite32be(0, ®s->gaddr[i]);
+ }
+
+ return 0;
+}
+
+u16 fman_dtsec_get_max_frame_len(struct dtsec_regs __iomem *regs)
+{
+ return (u16)ioread32be(®s->maxfrm);
+}
+
+void fman_dtsec_set_max_frame_len(struct dtsec_regs __iomem *regs, u16 length)
+{
+ iowrite32be(length, ®s->maxfrm);
+}
+
+void fman_dtsec_set_mac_address(struct dtsec_regs __iomem *regs, u8 *adr)
+{
+ u32 tmp;
+
+ tmp = (u32)((adr[5] << 24) |
+ (adr[4] << 16) | (adr[3] << 8) | adr[2]);
+ iowrite32be(tmp, ®s->macstnaddr1);
+
+ tmp = (u32)((adr[1] << 24) | (adr[0] << 16));
+ iowrite32be(tmp, ®s->macstnaddr2);
+}
+
+void fman_dtsec_set_bucket(struct dtsec_regs __iomem *regs, int bucket,
+ bool enable)
+{
+ int reg_idx = (bucket >> 5) & 0xf;
+ int bit_idx = bucket & 0x1f;
+ u32 bit_mask = 0x80000000 >> bit_idx;
+ u32 __iomem *reg;
+
+ if (reg_idx > 7)
+ reg = ®s->gaddr[reg_idx - 8];
+ else
+ reg = ®s->igaddr[reg_idx];
+
+ if (enable)
+ iowrite32be(ioread32be(reg) | bit_mask, reg);
+ else
+ iowrite32be(ioread32be(reg) & (~bit_mask), reg);
+}
+
+int fman_dtsec_adjust_link(struct dtsec_regs __iomem *regs,
+ enum enet_interface __maybe_unused iface_mode,
+ enum enet_speed speed, bool full_dx)
+{
+ u32 tmp;
+
+ if ((speed == E_ENET_SPEED_1000) && !full_dx)
+ return -EINVAL;
+
+ tmp = ioread32be(®s->maccfg2);
+ if (!full_dx)
+ tmp &= ~MACCFG2_FULL_DUPLEX;
+ else
+ tmp |= MACCFG2_FULL_DUPLEX;
+
+ tmp &= ~(MACCFG2_NIBBLE_MODE | MACCFG2_BYTE_MODE);
+ if (speed < E_ENET_SPEED_1000)
+ tmp |= MACCFG2_NIBBLE_MODE;
+ else if (speed == E_ENET_SPEED_1000)
+ tmp |= MACCFG2_BYTE_MODE;
+ iowrite32be(tmp, ®s->maccfg2);
+
+ tmp = ioread32be(®s->ecntrl);
+ if (speed == E_ENET_SPEED_100)
+ tmp |= DTSEC_ECNTRL_R100M;
+ else
+ tmp &= ~DTSEC_ECNTRL_R100M;
+ iowrite32be(tmp, ®s->ecntrl);
+
+ return 0;
+}
+
+void fman_dtsec_set_uc_promisc(struct dtsec_regs __iomem *regs, bool enable)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->rctrl);
+
+ if (enable)
+ tmp |= RCTRL_UPROM;
+ else
+ tmp &= ~RCTRL_UPROM;
+
+ iowrite32be(tmp, ®s->rctrl);
+}
+
+void fman_dtsec_set_mc_promisc(struct dtsec_regs __iomem *regs, bool enable)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->rctrl);
+
+ if (enable)
+ tmp |= RCTRL_MPROM;
+ else
+ tmp &= ~RCTRL_MPROM;
+
+ iowrite32be(tmp, ®s->rctrl);
+}
+
+void fman_dtsec_enable(struct dtsec_regs __iomem *regs, bool apply_rx,
+ bool apply_tx)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->maccfg1);
+
+ if (apply_rx)
+ tmp |= MACCFG1_RX_EN;
+
+ if (apply_tx)
+ tmp |= MACCFG1_TX_EN;
+
+ iowrite32be(tmp, ®s->maccfg1);
+}
+
+void fman_dtsec_disable(struct dtsec_regs __iomem *regs, bool apply_rx,
+ bool apply_tx)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->maccfg1);
+
+ if (apply_rx)
+ tmp &= ~MACCFG1_RX_EN;
+
+ if (apply_tx)
+ tmp &= ~MACCFG1_TX_EN;
+
+ iowrite32be(tmp, ®s->maccfg1);
+}
+
+void fman_dtsec_set_tx_pause_frames(struct dtsec_regs __iomem *regs, u16 time)
+{
+ u32 ptv = 0;
+
+ if (time) {
+ ptv = ioread32be(®s->ptv);
+ ptv &= PTV_PTE_MASK;
+ ptv |= time & PTV_PT_MASK;
+ iowrite32be(ptv, ®s->ptv);
+
+ /* trigger the transmission of a flow-control pause frame */
+ iowrite32be(ioread32be(®s->maccfg1) | MACCFG1_TX_FLOW,
+ ®s->maccfg1);
+ } else
+ iowrite32be(ioread32be(®s->maccfg1) & ~MACCFG1_TX_FLOW,
+ ®s->maccfg1);
+}
+
+void fman_dtsec_handle_rx_pause(struct dtsec_regs __iomem *regs, bool en)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->maccfg1);
+ if (en)
+ tmp |= MACCFG1_RX_FLOW;
+ else
+ tmp &= ~MACCFG1_RX_FLOW;
+ iowrite32be(tmp, ®s->maccfg1);
+}
+
+u32 fman_dtsec_get_rctrl(struct dtsec_regs __iomem *regs)
+{
+ return ioread32be(®s->rctrl);
+}
+
+u32 fman_dtsec_get_revision(struct dtsec_regs __iomem *regs)
+{
+ return ioread32be(®s->tsec_id);
+}
+
+u32 fman_dtsec_get_event(struct dtsec_regs __iomem *regs, u32 ev_mask)
+{
+ return ioread32be(®s->ievent) & ev_mask;
+}
+
+void fman_dtsec_ack_event(struct dtsec_regs __iomem *regs, u32 ev_mask)
+{
+ iowrite32be(ev_mask, ®s->ievent);
+}
+
+u32 fman_dtsec_get_interrupt_mask(struct dtsec_regs __iomem *regs)
+{
+ return ioread32be(®s->imask);
+}
+
+u32 fman_dtsec_check_and_clear_tmr_event(struct dtsec_regs __iomem *regs)
+{
+ u32 event;
+
+ event = ioread32be(®s->tmr_pevent);
+ event &= ioread32be(®s->tmr_pemask);
+
+ if (event)
+ iowrite32be(event, ®s->tmr_pevent);
+ return event;
+}
+
+void fman_dtsec_enable_tmr_interrupt(struct dtsec_regs __iomem *regs)
+{
+ iowrite32be(ioread32be(®s->tmr_pemask) | TMR_PEMASK_TSREEN,
+ ®s->tmr_pemask);
+}
+
+void fman_dtsec_disable_tmr_interrupt(struct dtsec_regs __iomem *regs)
+{
+ iowrite32be(ioread32be(®s->tmr_pemask) & ~TMR_PEMASK_TSREEN,
+ ®s->tmr_pemask);
+}
+
+void fman_dtsec_enable_interrupt(struct dtsec_regs __iomem *regs, u32 ev_mask)
+{
+ iowrite32be(ioread32be(®s->imask) | ev_mask, ®s->imask);
+}
+
+void fman_dtsec_disable_interrupt(struct dtsec_regs __iomem *regs, u32 ev_mask)
+{
+ iowrite32be(ioread32be(®s->imask) & ~ev_mask, ®s->imask);
+}
diff --git a/drivers/net/ethernet/freescale/fman/mac/fman_dtsec_mii_acc.c b/drivers/net/ethernet/freescale/fman/mac/fman_dtsec_mii_acc.c
new file mode 100644
index 0000000..3461adf
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/mac/fman_dtsec_mii_acc.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "fsl_fman_dtsec_mii_acc.h"
+
+/**
+ * dtsec_mii_get_div() - calculates the value of the dtsec mii divider
+ * @dtsec_freq: dtsec clock frequency (in Mhz)
+ *
+ * This function calculates the dtsec mii clock divider that determines
+ * the MII MDC clock. MII MDC clock will be set to work in the range
+ * of 1.5 to 2.5Mhz
+ * The output of this function is the value of MIIMCFG[MgmtClk] which
+ * implicitly determines the divider value.
+ * Note: the dTSEC system clock is equal to 1/2 of the FMan clock.
+ * The table below which reflects dtsec_mii_get_div() functionality
+ * shows the relations among dtsec_freq, MgmtClk, actual divider
+ * and the MII frequency:
+ * dtsec freq MgmtClk div MII freq Mhz
+ * [0.....80] 1 (1/4)(1/8) [0 to 2.5]
+ * [81...120] 2 (1/6)(1/8) [1.6 to 2.5]
+ * [121..160] 3 (1/8)(1/8) [1.8 to 2.5]
+ * [161..200] 4 (1/10)(1/8) [2.0 to 2.5]
+ * [201..280] 5 (1/14)(1/8) [1.8 to 2.5]
+ * [281..400] 6 (1/20)(1/8) [1.1 to 2.5]
+ * [401..560] 7 (1/28)(1/8) [1.8 to 2.5]
+ * [560..frq] 7 (1/28)(1/8) [frq/224]
+ * Returns: the MIIMCFG[MgmtClk] appropriate value
+ */
+static u8 dtsec_mii_get_div(u16 dtsec_freq)
+{
+ u16 mgmt_clk;
+
+ if (dtsec_freq < 80)
+ mgmt_clk = 1;
+ else if (dtsec_freq < 120)
+ mgmt_clk = 2;
+ else if (dtsec_freq < 160)
+ mgmt_clk = 3;
+ else if (dtsec_freq < 200)
+ mgmt_clk = 4;
+ else if (dtsec_freq < 280)
+ mgmt_clk = 5;
+ else if (dtsec_freq < 400)
+ mgmt_clk = 6;
+ else
+ mgmt_clk = 7;
+
+ return (u8)mgmt_clk;
+}
+
+int fman_dtsec_mii_write_reg(struct dtsec_mii_reg __iomem *regs, u8 addr,
+ u8 reg, u16 data, u16 dtsec_freq)
+{
+ u32 tmp;
+ int count;
+
+ /* Setup the MII Mgmt clock speed */
+ iowrite32be((u32)dtsec_mii_get_div(dtsec_freq), ®s->miimcfg);
+
+ /* Stop the MII management read cycle */
+ iowrite32be(0, ®s->miimcom);
+ /* Dummy read to make sure MIIMCOM is written */
+ tmp = ioread32be(®s->miimcom);
+
+ /* Setting up MII Management Address Register */
+ tmp = (u32)((addr << MIIMADD_PHY_ADDR_SHIFT) | reg);
+ iowrite32be(tmp, ®s->miimadd);
+
+ /* Setting up MII Management Control Register with data */
+ iowrite32be((u32)data, ®s->miimcon);
+ /* Dummy read to make sure MIIMCON is written */
+ tmp = ioread32be(®s->miimcon);
+
+ /* Wait until MII management write is complete */
+ count = 100;
+ do {
+ udelay(1);
+ } while (((ioread32be(®s->miimind)) & MIIMIND_BUSY) && count--);
+
+ if (count == 0)
+ return -EBUSY;
+
+ return 0;
+}
+
+int fman_dtsec_mii_read_reg(struct dtsec_mii_reg __iomem *regs, u8 addr,
+ u8 reg, u16 *data, u16 dtsec_freq)
+{
+ u32 tmp;
+ int count;
+
+ /* Setup the MII Mgmt clock speed */
+ iowrite32be((u32)dtsec_mii_get_div(dtsec_freq), ®s->miimcfg);
+
+ /* Setting up the MII Management Address Register */
+ tmp = (u32)((addr << MIIMADD_PHY_ADDR_SHIFT) | reg);
+ iowrite32be(tmp, ®s->miimadd);
+
+ /* Perform an MII management read cycle */
+ iowrite32be(MIIMCOM_READ_CYCLE, ®s->miimcom);
+ /* Dummy read to make sure MIIMCOM is written */
+ tmp = ioread32be(®s->miimcom);
+
+ /* Wait until MII management write is complete */
+ count = 100;
+ do {
+ udelay(1);
+ } while (((ioread32be(®s->miimind)) & MIIMIND_BUSY) && count--);
+
+ if (count == 0)
+ return -EBUSY;
+
+ /* Read MII management status */
+ *data = (u16)ioread32be(®s->miimstat);
+
+ iowrite32be(0, ®s->miimcom);
+ /* Dummy read to make sure MIIMCOM is written */
+ tmp = ioread32be(®s->miimcom);
+
+ if (*data == 0xffff)
+ return -ENXIO;
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/freescale/fman/mac/fman_memac.c b/drivers/net/ethernet/freescale/fman/mac/fman_memac.c
new file mode 100644
index 0000000..7ea219a
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/mac/fman_memac.c
@@ -0,0 +1,374 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "fsl_fman_memac.h"
+
+u32 fman_memac_get_event(struct memac_regs __iomem *regs, u32 ev_mask)
+{
+ return ioread32be(®s->ievent) & ev_mask;
+}
+
+u32 fman_memac_get_interrupt_mask(struct memac_regs __iomem *regs)
+{
+ return ioread32be(®s->imask);
+}
+
+void fman_memac_ack_event(struct memac_regs __iomem *regs, u32 ev_mask)
+{
+ iowrite32be(ev_mask, ®s->ievent);
+}
+
+void fman_memac_set_promiscuous(struct memac_regs __iomem *regs, bool val)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->command_config);
+
+ if (val)
+ tmp |= CMD_CFG_PROMIS_EN;
+ else
+ tmp &= ~CMD_CFG_PROMIS_EN;
+
+ iowrite32be(tmp, ®s->command_config);
+}
+
+void fman_memac_clear_addr_in_paddr(struct memac_regs __iomem *regs,
+ u8 paddr_num)
+{
+ if (paddr_num == 0) {
+ iowrite32be(0, ®s->mac_addr0.mac_addr_l);
+ iowrite32be(0, ®s->mac_addr0.mac_addr_u);
+ } else {
+ iowrite32be(0x0, ®s->mac_addr[paddr_num - 1].mac_addr_l);
+ iowrite32be(0x0, ®s->mac_addr[paddr_num - 1].mac_addr_u);
+ }
+}
+
+void fman_memac_add_addr_in_paddr(struct memac_regs __iomem *regs,
+ u8 *adr, u8 paddr_num)
+{
+ u32 tmp0, tmp1;
+
+ tmp0 = (u32)(adr[0] | adr[1] << 8 | adr[2] << 16 | adr[3] << 24);
+ tmp1 = (u32)(adr[4] | adr[5] << 8);
+
+ if (paddr_num == 0) {
+ iowrite32be(tmp0, ®s->mac_addr0.mac_addr_l);
+ iowrite32be(tmp1, ®s->mac_addr0.mac_addr_u);
+ } else {
+ iowrite32be(tmp0, ®s->mac_addr[paddr_num - 1].mac_addr_l);
+ iowrite32be(tmp1, ®s->mac_addr[paddr_num - 1].mac_addr_u);
+ }
+}
+
+void fman_memac_enable(struct memac_regs __iomem *regs, bool apply_rx,
+ bool apply_tx)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->command_config);
+
+ if (apply_rx)
+ tmp |= CMD_CFG_RX_EN;
+
+ if (apply_tx)
+ tmp |= CMD_CFG_TX_EN;
+
+ iowrite32be(tmp, ®s->command_config);
+}
+
+void fman_memac_disable(struct memac_regs __iomem *regs, bool apply_rx,
+ bool apply_tx)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->command_config);
+
+ if (apply_rx)
+ tmp &= ~CMD_CFG_RX_EN;
+
+ if (apply_tx)
+ tmp &= ~CMD_CFG_TX_EN;
+
+ iowrite32be(tmp, ®s->command_config);
+}
+
+int fman_memac_reset(struct memac_regs __iomem *regs)
+{
+ u32 tmp;
+ int count;
+
+ tmp = ioread32be(®s->command_config);
+
+ tmp |= CMD_CFG_SW_RESET;
+
+ iowrite32be(tmp, ®s->command_config);
+
+ count = 100;
+ do {
+ udelay(1);
+ } while ((ioread32be(®s->command_config) & CMD_CFG_SW_RESET) &&
+ --count);
+
+ if (count == 0)
+ return -EBUSY;
+
+ return 0;
+}
+
+int fman_memac_init(struct memac_regs __iomem *regs,
+ struct memac_cfg *cfg,
+ enum enet_interface enet_interface,
+ enum enet_speed enet_speed,
+ bool slow_10g_if,
+ u32 exceptions)
+{
+ u32 tmp;
+
+ /* Config */
+ tmp = 0;
+ if (cfg->wan_mode_enable)
+ tmp |= CMD_CFG_WAN_MODE;
+ if (cfg->promiscuous_mode_enable)
+ tmp |= CMD_CFG_PROMIS_EN;
+ if (cfg->pause_forward_enable)
+ tmp |= CMD_CFG_PAUSE_FWD;
+ if (cfg->pause_ignore)
+ tmp |= CMD_CFG_PAUSE_IGNORE;
+ if (cfg->tx_addr_ins_enable)
+ tmp |= CMD_CFG_TX_ADDR_INS;
+ if (cfg->loopback_enable)
+ tmp |= CMD_CFG_LOOPBACK_EN;
+ if (cfg->cmd_frame_enable)
+ tmp |= CMD_CFG_CNT_FRM_EN;
+ if (cfg->send_idle_enable)
+ tmp |= CMD_CFG_SEND_IDLE;
+ if (cfg->no_length_check_enable)
+ tmp |= CMD_CFG_NO_LEN_CHK;
+ if (cfg->rx_sfd_any)
+ tmp |= CMD_CFG_SFD_ANY;
+ if (cfg->pad_enable)
+ tmp |= CMD_CFG_TX_PAD_EN;
+ if (cfg->wake_on_lan)
+ tmp |= CMD_CFG_MG;
+
+ tmp |= CMD_CFG_CRC_FWD;
+
+ iowrite32be(tmp, ®s->command_config);
+
+ /* Max Frame Length */
+ iowrite32be((u32)cfg->max_frame_length, ®s->maxfrm);
+
+ /* Pause Time */
+ iowrite32be((u32)cfg->pause_quanta, ®s->pause_quanta[0]);
+ iowrite32be((u32)0, ®s->pause_thresh[0]);
+
+ /* IF_MODE */
+ tmp = 0;
+ switch (enet_interface) {
+ case E_ENET_IF_XGMII:
+ case E_ENET_IF_XFI:
+ tmp |= IF_MODE_XGMII;
+ break;
+ default:
+ tmp |= IF_MODE_GMII;
+ if (enet_interface == E_ENET_IF_RGMII && !cfg->loopback_enable)
+ tmp |= IF_MODE_RGMII | IF_MODE_RGMII_AUTO;
+ }
+ iowrite32be(tmp, ®s->if_mode);
+
+ /* TX_FIFO_SECTIONS */
+ tmp = 0;
+ if (enet_interface == E_ENET_IF_XGMII ||
+ enet_interface == E_ENET_IF_XFI) {
+ if (slow_10g_if) {
+ tmp |= (TX_FIFO_SECTIONS_TX_AVAIL_SLOW_10G |
+ TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_10G);
+ } else {
+ tmp |= (TX_FIFO_SECTIONS_TX_AVAIL_10G |
+ TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_10G);
+ }
+ } else {
+ tmp |= (TX_FIFO_SECTIONS_TX_AVAIL_1G |
+ TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_1G);
+ }
+ iowrite32be(tmp, ®s->tx_fifo_sections);
+
+ /* clear all pending events and set-up interrupts */
+ fman_memac_ack_event(regs, 0xffffffff);
+ fman_memac_set_exception(regs, exceptions, true);
+
+ return 0;
+}
+
+void fman_memac_set_exception(struct memac_regs __iomem *regs, u32 val,
+ bool enable)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->imask);
+ if (enable)
+ tmp |= val;
+ else
+ tmp &= ~val;
+
+ iowrite32be(tmp, ®s->imask);
+}
+
+void fman_memac_set_hash_table(struct memac_regs __iomem *regs, u32 val)
+{
+ iowrite32be(val, ®s->hashtable_ctrl);
+}
+
+u16 fman_memac_get_max_frame_len(struct memac_regs __iomem *regs)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->maxfrm);
+
+ return (u16)tmp;
+}
+
+void fman_memac_set_tx_pause_frames(struct memac_regs __iomem *regs,
+ u8 priority, u16 pause_time,
+ u16 thresh_time)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->tx_fifo_sections);
+
+ GET_TX_EMPTY_DEFAULT_VALUE(tmp);
+ iowrite32be(tmp, ®s->tx_fifo_sections);
+
+ tmp = ioread32be(®s->command_config);
+ tmp &= ~CMD_CFG_PFC_MODE;
+ priority = 0;
+
+ iowrite32be(tmp, ®s->command_config);
+
+ tmp = ioread32be(®s->pause_quanta[priority / 2]);
+ if (priority % 2)
+ tmp &= CLXY_PAUSE_QUANTA_CLX_PQNT;
+ else
+ tmp &= CLXY_PAUSE_QUANTA_CLY_PQNT;
+ tmp |= ((u32)pause_time << (16 * (priority % 2)));
+ iowrite32be(tmp, ®s->pause_quanta[priority / 2]);
+
+ tmp = ioread32be(®s->pause_thresh[priority / 2]);
+ if (priority % 2)
+ tmp &= CLXY_PAUSE_THRESH_CLX_QTH;
+ else
+ tmp &= CLXY_PAUSE_THRESH_CLY_QTH;
+ tmp |= ((u32)thresh_time << (16 * (priority % 2)));
+ iowrite32be(tmp, ®s->pause_thresh[priority / 2]);
+}
+
+void fman_memac_set_rx_ignore_pause_frames(struct memac_regs __iomem *regs,
+ bool enable)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->command_config);
+ if (enable)
+ tmp |= CMD_CFG_PAUSE_IGNORE;
+ else
+ tmp &= ~CMD_CFG_PAUSE_IGNORE;
+
+ iowrite32be(tmp, ®s->command_config);
+}
+
+void fman_memac_adjust_link(struct memac_regs __iomem *regs,
+ enum enet_interface iface_mode,
+ enum enet_speed speed, bool full_dx)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->if_mode);
+
+ if (full_dx)
+ tmp &= ~IF_MODE_HD;
+ else
+ tmp |= IF_MODE_HD;
+
+ if (iface_mode == E_ENET_IF_RGMII) {
+ /* Configure RGMII in manual mode */
+ tmp &= ~IF_MODE_RGMII_AUTO;
+ tmp &= ~IF_MODE_RGMII_SP_MASK;
+
+ if (full_dx)
+ tmp |= IF_MODE_RGMII_FD;
+ else
+ tmp &= ~IF_MODE_RGMII_FD;
+
+ switch (speed) {
+ case E_ENET_SPEED_1000:
+ tmp |= IF_MODE_RGMII_1000;
+ break;
+ case E_ENET_SPEED_100:
+ tmp |= IF_MODE_RGMII_100;
+ break;
+ case E_ENET_SPEED_10:
+ tmp |= IF_MODE_RGMII_10;
+ break;
+ default:
+ break;
+ }
+ }
+
+ iowrite32be(tmp, ®s->if_mode);
+}
+
+void fman_memac_defconfig(struct memac_cfg *cfg)
+{
+ cfg->reset_on_init = false;
+ cfg->wan_mode_enable = false;
+ cfg->promiscuous_mode_enable = false;
+ cfg->pause_forward_enable = false;
+ cfg->pause_ignore = false;
+ cfg->tx_addr_ins_enable = false;
+ cfg->loopback_enable = false;
+ cfg->cmd_frame_enable = false;
+ cfg->rx_error_discard = false;
+ cfg->send_idle_enable = false;
+ cfg->no_length_check_enable = true;
+ cfg->lgth_check_nostdr = false;
+ cfg->time_stamp_enable = false;
+ cfg->tx_ipg_length = DEFAULT_TX_IPG_LENGTH;
+ cfg->max_frame_length = DEFAULT_FRAME_LENGTH;
+ cfg->pause_quanta = DEFAULT_PAUSE_QUANTA;
+ cfg->pad_enable = true;
+ cfg->phy_tx_ena_on = false;
+ cfg->rx_sfd_any = false;
+ cfg->rx_pbl_fwd = false;
+ cfg->tx_pbl_fwd = false;
+ cfg->debug_mode = false;
+ cfg->wake_on_lan = false;
+}
diff --git a/drivers/net/ethernet/freescale/fman/mac/fman_memac_mii_acc.c b/drivers/net/ethernet/freescale/fman/mac/fman_memac_mii_acc.c
new file mode 100644
index 0000000..f59bc79
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/mac/fman_memac_mii_acc.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "fsl_fman_memac_mii_acc.h"
+
+static int write_phy_reg_10g(struct memac_mii_access_mem_map __iomem *mii_regs,
+ u8 phy_addr, u8 reg, u16 data)
+{
+ u32 tmp_reg;
+ int count;
+
+ tmp_reg = ioread32be(&mii_regs->mdio_cfg);
+ /* Leave only MDIO_CLK_DIV bits set on */
+ tmp_reg &= MDIO_CFG_CLK_DIV_MASK;
+ /* Set maximum MDIO_HOLD value to allow phy to see
+ * change of data signal
+ */
+ tmp_reg |= MDIO_CFG_HOLD_MASK;
+ /* Add 10G interface mode */
+ tmp_reg |= MDIO_CFG_ENC45;
+ iowrite32be(tmp_reg, &mii_regs->mdio_cfg);
+
+ /* Wait for command completion */
+ count = 100;
+ do {
+ udelay(1);
+ } while (((ioread32be(&mii_regs->mdio_cfg)) & MDIO_CFG_BSY) && --count);
+
+ if (count == 0)
+ return -EBUSY;
+
+ /* Specify phy and register to be accessed */
+ iowrite32be(phy_addr, &mii_regs->mdio_ctrl);
+ iowrite32be(reg, &mii_regs->mdio_addr);
+
+ count = 100;
+ do {
+ udelay(1);
+ } while (((ioread32be(&mii_regs->mdio_cfg)) & MDIO_CFG_BSY) && --count);
+
+ if (count == 0)
+ return -EBUSY;
+
+ /* Write data */
+ iowrite32be(data, &mii_regs->mdio_data);
+
+ /* Wait for write transaction end */
+ count = 100;
+ do {
+ udelay(1);
+ } while (((ioread32be(&mii_regs->mdio_data)) & MDIO_DATA_BSY) &&
+ --count);
+
+ if (count == 0)
+ return -EBUSY;
+
+ return 0;
+}
+
+static int write_phy_reg_1g(struct memac_mii_access_mem_map __iomem *mii_regs,
+ u8 phy_addr, u8 reg, u16 data)
+{
+ u32 tmp_reg;
+ int count;
+
+ /* Leave only MDIO_CLK_DIV and MDIO_HOLD bits set on */
+ tmp_reg = ioread32be(&mii_regs->mdio_cfg);
+ tmp_reg &= (MDIO_CFG_CLK_DIV_MASK | MDIO_CFG_HOLD_MASK);
+ iowrite32be(tmp_reg, &mii_regs->mdio_cfg);
+
+ /* Wait for command completion */
+ count = 100;
+ do {
+ udelay(1);
+ } while (((ioread32be(&mii_regs->mdio_cfg)) & MDIO_CFG_BSY) && --count);
+
+ if (count == 0)
+ return -EBUSY;
+
+ /* Write transaction */
+ tmp_reg = (phy_addr << MDIO_CTL_PHY_ADDR_SHIFT);
+ tmp_reg |= reg;
+ iowrite32be(tmp_reg, &mii_regs->mdio_ctrl);
+
+ /* Wait for command completion */
+ count = 100;
+ do {
+ udelay(1);
+ } while (((ioread32be(&mii_regs->mdio_cfg)) & MDIO_CFG_BSY) && --count);
+
+ if (count == 0)
+ return -EBUSY;
+
+ iowrite32be(data, &mii_regs->mdio_data);
+
+ /* Wait for write transaction to end */
+ count = 100;
+ do {
+ udelay(1);
+ } while (((ioread32be(&mii_regs->mdio_data)) & MDIO_DATA_BSY) &&
+ --count);
+
+ if (count == 0)
+ return -EBUSY;
+
+ return 0;
+}
+
+int fman_memac_mii_write_phy_reg(struct memac_mii_access_mem_map __iomem
+ *mii_regs, u8 phy_addr, u8 reg, u16 data,
+ enum enet_speed enet_speed)
+{
+ int err = 0;
+ /* Figure out interface type - 10G vs 1G.
+ * In 10G interface both phy_addr and devAddr present.
+ */
+ if (enet_speed == E_ENET_SPEED_10000)
+ err = write_phy_reg_10g(mii_regs, phy_addr, reg, data);
+ else
+ err = write_phy_reg_1g(mii_regs, phy_addr, reg, data);
+
+ return err;
+}
diff --git a/drivers/net/ethernet/freescale/fman/mac/fman_tgec.c b/drivers/net/ethernet/freescale/fman/mac/fman_tgec.c
new file mode 100644
index 0000000..92ac11a
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/mac/fman_tgec.c
@@ -0,0 +1,207 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "fsl_fman_tgec.h"
+
+void fman_tgec_set_mac_address(struct tgec_regs __iomem *regs, u8 *adr)
+{
+ u32 tmp0, tmp1;
+
+ tmp0 = (u32)(adr[0] | adr[1] << 8 | adr[2] << 16 | adr[3] << 24);
+ tmp1 = (u32)(adr[4] | adr[5] << 8);
+ iowrite32be(tmp0, ®s->mac_addr_0);
+ iowrite32be(tmp1, ®s->mac_addr_1);
+}
+
+void fman_tgec_enable(struct tgec_regs __iomem *regs, bool apply_rx,
+ bool apply_tx)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->command_config);
+ if (apply_rx)
+ tmp |= CMD_CFG_RX_EN;
+ if (apply_tx)
+ tmp |= CMD_CFG_TX_EN;
+ iowrite32be(tmp, ®s->command_config);
+}
+
+void fman_tgec_disable(struct tgec_regs __iomem *regs, bool apply_rx,
+ bool apply_tx)
+{
+ u32 tmp_reg_32;
+
+ tmp_reg_32 = ioread32be(®s->command_config);
+ if (apply_rx)
+ tmp_reg_32 &= ~CMD_CFG_RX_EN;
+ if (apply_tx)
+ tmp_reg_32 &= ~CMD_CFG_TX_EN;
+ iowrite32be(tmp_reg_32, ®s->command_config);
+}
+
+void fman_tgec_set_promiscuous(struct tgec_regs __iomem *regs, bool val)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->command_config);
+ if (val)
+ tmp |= CMD_CFG_PROMIS_EN;
+ else
+ tmp &= ~CMD_CFG_PROMIS_EN;
+ iowrite32be(tmp, ®s->command_config);
+}
+
+void fman_tgec_set_hash_table(struct tgec_regs __iomem *regs, u32 value)
+{
+ iowrite32be(value, ®s->hashtable_ctrl);
+}
+
+void fman_tgec_set_tx_pause_frames(struct tgec_regs __iomem *regs,
+ u16 pause_time)
+{
+ iowrite32be((u32)pause_time, ®s->pause_quant);
+}
+
+void fman_tgec_set_rx_ignore_pause_frames(struct tgec_regs __iomem *regs,
+ bool en)
+{
+ u32 tmp;
+
+ tmp = ioread32be(®s->command_config);
+ if (en)
+ tmp |= CMD_CFG_PAUSE_IGNORE;
+ else
+ tmp &= ~CMD_CFG_PAUSE_IGNORE;
+ iowrite32be(tmp, ®s->command_config);
+}
+
+u32 fman_tgec_get_event(struct tgec_regs __iomem *regs, u32 ev_mask)
+{
+ return ioread32be(®s->ievent) & ev_mask;
+}
+
+void fman_tgec_ack_event(struct tgec_regs __iomem *regs, u32 ev_mask)
+{
+ iowrite32be(ev_mask, ®s->ievent);
+}
+
+u32 fman_tgec_get_interrupt_mask(struct tgec_regs __iomem *regs)
+{
+ return ioread32be(®s->imask);
+}
+
+u32 fman_tgec_get_revision(struct tgec_regs __iomem *regs)
+{
+ return ioread32be(®s->tgec_id);
+}
+
+void fman_tgec_enable_interrupt(struct tgec_regs __iomem *regs, u32 ev_mask)
+{
+ iowrite32be(ioread32be(®s->imask) | ev_mask, ®s->imask);
+}
+
+void fman_tgec_disable_interrupt(struct tgec_regs __iomem *regs, u32 ev_mask)
+{
+ iowrite32be(ioread32be(®s->imask) & ~ev_mask, ®s->imask);
+}
+
+void fman_tgec_defconfig(struct tgec_cfg *cfg)
+{
+ cfg->wan_mode_enable = DEFAULT_WAN_MODE_ENABLE;
+ cfg->promiscuous_mode_enable = DEFAULT_PROMISCUOUS_MODE_ENABLE;
+ cfg->pause_forward_enable = DEFAULT_PAUSE_FORWARD_ENABLE;
+ cfg->pause_ignore = DEFAULT_PAUSE_IGNORE;
+ cfg->tx_addr_ins_enable = DEFAULT_TX_ADDR_INS_ENABLE;
+ cfg->loopback_enable = DEFAULT_LOOPBACK_ENABLE;
+ cfg->cmd_frame_enable = DEFAULT_CMD_FRAME_ENABLE;
+ cfg->rx_error_discard = DEFAULT_RX_ERROR_DISCARD;
+ cfg->send_idle_enable = DEFAULT_SEND_IDLE_ENABLE;
+ cfg->no_length_check_enable = DEFAULT_NO_LENGTH_CHECK_ENABLE;
+ cfg->lgth_check_nostdr = DEFAULT_LGTH_CHECK_NOSTDR;
+ cfg->time_stamp_enable = DEFAULT_TIME_STAMP_ENABLE;
+ cfg->tx_ipg_length = DEFAULT_TX_IPG_LENGTH;
+ cfg->max_frame_length = DEFAULT_MAX_FRAME_LENGTH;
+ cfg->pause_quant = DEFAULT_PAUSE_QUANT;
+}
+
+int fman_tgec_init(struct tgec_regs __iomem *regs, struct tgec_cfg *cfg,
+ u32 exception_mask)
+{
+ u32 tmp;
+
+ /* Config */
+ tmp = CMF_CFG_CRC_FWD;
+ if (cfg->wan_mode_enable)
+ tmp |= CMD_CFG_WAN_MODE;
+ if (cfg->promiscuous_mode_enable)
+ tmp |= CMD_CFG_PROMIS_EN;
+ if (cfg->pause_forward_enable)
+ tmp |= CMD_CFG_PAUSE_FWD;
+ if (cfg->pause_ignore)
+ tmp |= CMD_CFG_PAUSE_IGNORE;
+ if (cfg->tx_addr_ins_enable)
+ tmp |= CMD_CFG_TX_ADDR_INS;
+ if (cfg->loopback_enable)
+ tmp |= CMD_CFG_LOOPBACK_EN;
+ if (cfg->cmd_frame_enable)
+ tmp |= CMD_CFG_CMD_FRM_EN;
+ if (cfg->rx_error_discard)
+ tmp |= CMD_CFG_RX_ER_DISC;
+ if (cfg->send_idle_enable)
+ tmp |= CMD_CFG_SEND_IDLE;
+ if (cfg->no_length_check_enable)
+ tmp |= CMD_CFG_NO_LEN_CHK;
+ if (cfg->time_stamp_enable)
+ tmp |= CMD_CFG_EN_TIMESTAMP;
+ iowrite32be(tmp, ®s->command_config);
+
+ /* Max Frame Length */
+ iowrite32be((u32)cfg->max_frame_length, ®s->maxfrm);
+ /* Pause Time */
+ iowrite32be(cfg->pause_quant, ®s->pause_quant);
+
+ /* clear all pending events and set-up interrupts */
+ fman_tgec_ack_event(regs, 0xffffffff);
+ fman_tgec_enable_interrupt(regs, exception_mask);
+
+ return 0;
+}
+
+void fman_tgec_set_erratum_tx_fifo_corruption_10gmac_a007(struct tgec_regs
+ __iomem *regs)
+{
+ u32 tmp;
+
+ /* restore the default tx ipg Length */
+ tmp = (ioread32be(®s->tx_ipg_len) & ~TGEC_TX_IPG_LENGTH_MASK) | 12;
+
+ iowrite32be(tmp, ®s->tx_ipg_len);
+}
--
1.7.9.5