The current code attempts to prepare clk_per and clk_ipg
before using the device. However, the result is an extra
prepare call on each clock. Here is the output of uart
clocks (only uart enabled and used as console):
$ grep uart /sys/kernel/debug/clk/clk_summary
uart_serial 1 2 80000000 0 0
uart 1 2 66000000 0 0
This patch balances the calls of prepares. The result is:
$ grep uart /sys/kernel/debug/clk/clk_summary
uart_serial 1 1 80000000 0 0
uart 1 1 66000000 0 0
Cc: Fabio Stevam <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Eduardo Valentin <[email protected]>
---
drivers/tty/serial/imx.c | 20 ++++++--------------
1 file changed, 6 insertions(+), 14 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 54fdc78..b53455d 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1624,12 +1624,12 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
int locked = 1;
int retval;
- retval = clk_enable(sport->clk_per);
+ retval = clk_prepare_enable(sport->clk_per);
if (retval)
return;
- retval = clk_enable(sport->clk_ipg);
+ retval = clk_prepare_enable(sport->clk_ipg);
if (retval) {
- clk_disable(sport->clk_per);
+ clk_disable_unprepare(sport->clk_per);
return;
}
@@ -1668,8 +1668,8 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
if (locked)
spin_unlock_irqrestore(&sport->port.lock, flags);
- clk_disable(sport->clk_ipg);
- clk_disable(sport->clk_per);
+ clk_disable_unprepare(sport->clk_ipg);
+ clk_disable_unprepare(sport->clk_per);
}
/*
@@ -1770,15 +1770,7 @@ imx_console_setup(struct console *co, char *options)
retval = uart_set_options(&sport->port, co, baud, parity, bits, flow);
- clk_disable(sport->clk_ipg);
- if (retval) {
- clk_unprepare(sport->clk_ipg);
- goto error_console;
- }
-
- retval = clk_prepare(sport->clk_per);
- if (retval)
- clk_disable_unprepare(sport->clk_ipg);
+ clk_disable_unprepare(sport->clk_ipg);
error_console:
return retval;
--
2.5.0