Add snps,quirk-frame-length-adjustment property which provides value
for post silicon frame length adjustment
Signed-off-by: Nikhil Badola <[email protected]>
---
Changes for v2
- changed quirk name as well description
Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 0815eac..8c7d585 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -40,6 +40,9 @@ Optional properties:
- snps,hird-threshold: HIRD threshold
- snps,hsphy_interface: High-Speed PHY interface selection between "utmi" for
UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3.
+ - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ
+ register for post-silicon frame length adjustment when the
+ fladj_30mhz_sdbnd signal is invalid or incorrect.
This is usually a subnode to DWC3 glue to which it is connected.
--
2.1.0
> -----Original Message-----
> From: Nikhil Badola [mailto:[email protected]]
> Sent: Monday, August 17, 2015 9:54 AM
> To: [email protected]; [email protected]; linux-
> [email protected]
> Cc: [email protected]; Badola Nikhil-B46172 <[email protected]>
> Subject: [PATCH 1/3][v2] Documentation: dt: dwc3: Add snps,quirk-frame-
> length-adjustment property
>
> Add snps,quirk-frame-length-adjustment property which provides value for
> post silicon frame length adjustment
>
> Signed-off-by: Nikhil Badola <[email protected]>
> ---
> Changes for v2
> - changed quirk name as well description
>
> Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt
> b/Documentation/devicetree/bindings/usb/dwc3.txt
> index 0815eac..8c7d585 100644
> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
> @@ -40,6 +40,9 @@ Optional properties:
> - snps,hird-threshold: HIRD threshold
> - snps,hsphy_interface: High-Speed PHY interface selection between "utmi"
> for
> UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has
> value 3.
> + - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of
> GFLADJ
> + register for post-silicon frame length adjustment when the
> + fladj_30mhz_sdbnd signal is invalid or incorrect.
>
> This is usually a subnode to DWC3 glue to which it is connected.
>
> --
> 2.1.0
Hi Felipe,
I have incorporated the review comments provided by you.
Could you please provide me review comments, if any, on this 2nd version of patch set.
Thanks,
Nikhil