2015-08-18 06:29:30

by Pankaj Dubey

[permalink] [raw]
Subject: [PATCHi v2] ARM: dts: Fix bootup issue on smdk5250

From: Yadwinder Singh Brar <[email protected]>

With default config on smdk5250 latest tree throws below message :

[ 2.226049] thermal thermal_zone0: critical temperature reached(224 C),shutting down
[ 2.227840] reboot: Failed to start orderly shutdown: forcing the issue

and hangs randomly because it reads wrong temperature value.

I can't figure out any direct relation between LDO10 and TMU from board
schematics which I have. So making LDO10 always-on to fix issue for now.

Signed-off-by: Yadwinder Singh Brar <[email protected]>
[pankaj.dubey: resubmitted after rebasing to latest kgene tree]
Signed-off-by: Pankaj Dubey <[email protected]>
Tested-by: Pankaj Dubey <[email protected]>
---
Resending this patch after rebasing. Previous discussion can be found here [1]


[1]: http://www.spinics.net/lists/linux-samsung-soc/msg39100.html

Changes since v1:
- Rebased on latest kgene tree, test booting and s2r on SMDK5250 board.
- Removed Yadwinder Singh's Samsung's email id as it's no more valid.
- Added my Signed-off-by for touching this file and patch.

arch/arm/boot/dts/exynos5250-smdk5250.dts | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 15aea76..c625e71 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -197,6 +197,7 @@
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};

ldo11_reg: LDO11 {
--
2.4.5


2015-08-18 07:02:45

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCHi v2] ARM: dts: Fix bootup issue on smdk5250

On 18.08.2015 15:29, Pankaj Dubey wrote:
> From: Yadwinder Singh Brar <[email protected]>
>
> With default config on smdk5250 latest tree throws below message :
>
> [ 2.226049] thermal thermal_zone0: critical temperature reached(224 C),shutting down
> [ 2.227840] reboot: Failed to start orderly shutdown: forcing the issue
>
> and hangs randomly because it reads wrong temperature value.
>
> I can't figure out any direct relation between LDO10 and TMU from board
> schematics which I have. So making LDO10 always-on to fix issue for now.
>
> Signed-off-by: Yadwinder Singh Brar <[email protected]>
> [pankaj.dubey: resubmitted after rebasing to latest kgene tree]
> Signed-off-by: Pankaj Dubey <[email protected]>
> Tested-by: Pankaj Dubey <[email protected]>
> ---
> Resending this patch after rebasing. Previous discussion can be found here [1]
>
>
> [1]: http://www.spinics.net/lists/linux-samsung-soc/msg39100.html
>
> Changes since v1:
> - Rebased on latest kgene tree, test booting and s2r on SMDK5250 board.
> - Removed Yadwinder Singh's Samsung's email id as it's no more valid.
> - Added my Signed-off-by for touching this file and patch.
>
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 1 +
> 1 file changed, 1 insertion(+)

Since previous discussion ([1] above) there have not been any updates on
cause of this issue so I think this should go in:

Acked-by: Krzysztof Kozlowski <[email protected]>

Best regards,
Krzysztof