2015-11-04 07:36:40

by Yoshinori Sato

[permalink] [raw]
Subject: [PATCH] h8300: Initialize cleanup and remove module code

h8300's clocksource driver cleanup.
- Use CLOCKSOURCE_OF_DECLARE
- Remove module exit

Signed-off-by: Yoshinori Sato <[email protected]>
---
drivers/clocksource/h8300_timer16.c | 133 ++++++++++++-----------------
drivers/clocksource/h8300_timer8.c | 164 ++++++++++++++----------------------
drivers/clocksource/h8300_tpu.c | 105 ++++++++---------------
3 files changed, 151 insertions(+), 251 deletions(-)

diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
index 82941c1..e2e10cf 100644
--- a/drivers/clocksource/h8300_timer16.c
+++ b/drivers/clocksource/h8300_timer16.c
@@ -17,6 +17,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>

#include <asm/segment.h>
#include <asm/irq.h>
@@ -47,7 +49,6 @@
#define ABSOLUTE 1

struct timer16_priv {
- struct platform_device *pdev;
struct clocksource cs;
struct irqaction irqaction;
unsigned long total_cycles;
@@ -147,43 +148,58 @@ static void timer16_disable(struct clocksource *cs)
#define REG_CH 0
#define REG_COMM 1

-static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
+static void __init h8300_16timer_init(struct device_node *node)
{
- struct resource *res[2];
+ void __iomem *base[2];
int ret, irq;
unsigned int ch;
+ struct timer16_priv *p;
+ struct clk *clk;
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clocksource\n");
+ return;
+ }

- memset(p, 0, sizeof(*p));
- p->pdev = pdev;
+ base[REG_CH] = of_iomap(node, 0);
+ if (!base[0]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto free_clk;
+ }

- res[REG_CH] = platform_get_resource(p->pdev,
- IORESOURCE_MEM, REG_CH);
- res[REG_COMM] = platform_get_resource(p->pdev,
- IORESOURCE_MEM, REG_COMM);
- if (!res[REG_CH] || !res[REG_COMM]) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
+ base[REG_COMM] = of_iomap(node, 1);
+ if (!base[1]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto unmap_ch;
}
- irq = platform_get_irq(p->pdev, 0);
+
+ irq = irq_of_parse_and_map(node, 0);
if (irq < 0) {
- dev_err(&p->pdev->dev, "failed to get irq\n");
- return irq;
+ pr_err("failed to get irq for clockevent\n");
+ goto unmap_comm;
}

- p->clk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->clk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->clk);
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (!p) {
+ pr_err("failed to allocate memory for clocksource\n");
+ goto unmap_comm;
}
- of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);

- p->pdev = pdev;
- p->mapbase = res[REG_CH]->start;
- p->mapcommon = res[REG_COMM]->start;
+ of_property_read_u32(node, "renesas,channel", &ch);
+
+ p->mapbase = (unsigned long)base[REG_CH];
+ p->mapcommon = (unsigned long)base[REG_COMM];
p->enb = 1 << ch;
p->imfa = 1 << ch;
p->imiea = 1 << (4 + ch);
- p->cs.name = pdev->name;
+
+ p->irqaction.name = node->name;
+ p->irqaction.handler = timer16_interrupt;
+ p->irqaction.dev_id = p;
+ p->irqaction.flags = IRQF_TIMER;
+
+ p->cs.name = node->name;
p->cs.rating = 200;
p->cs.read = timer16_clocksource_read;
p->cs.enable = timer16_enable;
@@ -191,64 +207,23 @@ static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;

- ret = request_irq(irq, timer16_interrupt,
- IRQF_TIMER, pdev->name, p);
+ ret = setup_irq(irq, &p->irqaction);
if (ret < 0) {
- dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
- return ret;
+ pr_err("failed to request irq %d of clocksource\n", irq);
+ goto free_priv;
}

clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
-
- return 0;
-}
-
-static int timer16_probe(struct platform_device *pdev)
-{
- struct timer16_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
- }
-
- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
-
- return timer16_setup(p, pdev);
-}
-
-static int timer16_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
-
-static const struct of_device_id timer16_of_table[] = {
- { .compatible = "renesas,16bit-timer" },
- { }
-};
-static struct platform_driver timer16_driver = {
- .probe = timer16_probe,
- .remove = timer16_remove,
- .driver = {
- .name = "h8300h-16timer",
- .of_match_table = of_match_ptr(timer16_of_table),
- }
-};
-
-static int __init timer16_init(void)
-{
- return platform_driver_register(&timer16_driver);
-}
-
-static void __exit timer16_exit(void)
-{
- platform_driver_unregister(&timer16_driver);
+ return;
+
+free_priv:
+ kfree(p);
+unmap_comm:
+ iounmap(base[REG_COMM]);
+unmap_ch:
+ iounmap(base[REG_CH]);
+free_clk:
+ clk_put(clk);
}

-subsys_initcall(timer16_init);
-module_exit(timer16_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300H 16bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer", h8300_16timer_init);
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index e83db7b..0a2333b 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -12,13 +12,14 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/clockchips.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>

#include <asm/irq.h>

@@ -39,8 +40,9 @@
#define RELATIVE 0
#define ABSOLUTE 1

+#define SCALE 64
+
struct timer8_priv {
- struct platform_device *pdev;
struct clock_event_device ced;
struct irqaction irqaction;
unsigned long mapbase;
@@ -76,8 +78,6 @@ static irqreturn_t timer8_interrupt(int irq, void *dev_id)
{
struct timer8_priv *p = dev_id;

- ctrl_outb(ctrl_inb(p->mapbase + _8TCSR) & ~0x40,
- p->mapbase + _8TCSR);
p->flags |= FLAG_IRQCONTEXT;
ctrl_outw(p->tcora, p->mapbase + TCORA);
if (!(p->flags & FLAG_SKIPEVENT)) {
@@ -85,6 +85,8 @@ static irqreturn_t timer8_interrupt(int irq, void *dev_id)
ctrl_outw(0x0000, p->mapbase + _8TCR);
p->ced.event_handler(&p->ced);
}
+ ctrl_outb(ctrl_inb(p->mapbase + _8TCSR) & ~0x40,
+ p->mapbase + _8TCSR);
p->flags &= ~(FLAG_SKIPEVENT | FLAG_IRQCONTEXT);

return IRQ_HANDLED;
@@ -96,23 +98,25 @@ static void timer8_set_next(struct timer8_priv *p, unsigned long delta)
unsigned long now;

raw_spin_lock_irqsave(&p->lock, flags);
- if (delta >= 0x10000)
- dev_warn(&p->pdev->dev, "delta out of range\n");
now = timer8_get_counter(p);
p->tcora = delta;
- ctrl_outb(ctrl_inb(p->mapbase + _8TCR) & ~0x40, p->mapbase + _8TCR);
- if (delta > now)
- ctrl_outw(delta, p->mapbase + TCORA);
- else
- ctrl_outw(now + 1, p->mapbase + TCORA);
- ctrl_outb(ctrl_inb(p->mapbase + _8TCR) | 0x40, p->mapbase + _8TCR);
+ if (unlikely(p->flags & FLAG_IRQCONTEXT)) {
+ ctrl_outb(ctrl_inb(p->mapbase + _8TCR) & ~0x40,
+ p->mapbase + _8TCR);
+ if (delta > now)
+ ctrl_outw(delta, p->mapbase + TCORA);
+ else
+ ctrl_outw(now + 1, p->mapbase + TCORA);
+ ctrl_outb(ctrl_inb(p->mapbase + _8TCR) | 0x40,
+ p->mapbase + _8TCR);
+ }

raw_spin_unlock_irqrestore(&p->lock, flags);
}

static int timer8_enable(struct timer8_priv *p)
{
- p->rate = clk_get_rate(p->pclk) / 64;
+ p->rate = clk_get_rate(p->pclk) / SCALE;
ctrl_outw(0xffff, p->mapbase + TCORA);
ctrl_outw(0x0000, p->mapbase + _8TCNT);
ctrl_outw(0x0c02, p->mapbase + _8TCR);
@@ -159,14 +163,7 @@ static inline struct timer8_priv *ced_to_priv(struct clock_event_device *ced)

static void timer8_clock_event_start(struct timer8_priv *p, int periodic)
{
- struct clock_event_device *ced = &p->ced;
-
timer8_start(p);
-
- ced->shift = 32;
- ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift);
- ced->max_delta_ns = clockevent_delta2ns(0xffff, ced);
- ced->min_delta_ns = clockevent_delta2ns(0x0001, ced);
timer8_set_next(p, periodic?(p->rate + HZ/2) / HZ:0x10000);
}

@@ -180,7 +177,7 @@ static int timer8_clock_event_periodic(struct clock_event_device *ced)
{
struct timer8_priv *p = ced_to_priv(ced);

- dev_info(&p->pdev->dev, "used for periodic clock events\n");
+ pr_info("%s: used for periodic clock events\n", ced->name);
timer8_stop(p);
timer8_clock_event_start(p, PERIODIC);

@@ -191,7 +188,7 @@ static int timer8_clock_event_oneshot(struct clock_event_device *ced)
{
struct timer8_priv *p = ced_to_priv(ced);

- dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+ pr_info("%s: used for oneshot clock events\n", ced->name);
timer8_stop(p);
timer8_clock_event_start(p, ONESHOT);

@@ -209,42 +206,48 @@ static int timer8_clock_event_next(unsigned long delta,
return 0;
}

-static int timer8_setup(struct timer8_priv *p,
- struct platform_device *pdev)
+static void __init h8300_8timer_init(struct device_node *node)
{
- struct resource *res;
+ void __iomem *base;
int irq;
- int ret;
-
- memset(p, 0, sizeof(*p));
- p->pdev = pdev;
+ int ret = 0;
+ int rate;
+ struct timer8_priv *p;
+ struct clk *clk;
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clockevent\n");
+ return;
+ }

- res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("failed to map registers for clockevent\n");
+ goto free_clk;
}

- irq = platform_get_irq(p->pdev, 0);
+ irq = irq_of_parse_and_map(node, 0);
if (irq < 0) {
- dev_err(&p->pdev->dev, "failed to get irq\n");
- return -ENXIO;
+ pr_err("failed to get irq for clockevent\n");
+ goto unmap_reg;
+ }
+
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (!p) {
+ pr_err("failed to allocate memory for clockevent\n");
+ goto unmap_reg;
}

- p->mapbase = res->start;
+ p->mapbase = (unsigned long)base;
+ p->pclk = clk;

- p->irqaction.name = dev_name(&p->pdev->dev);
+ p->irqaction.name = node->name;
p->irqaction.handler = timer8_interrupt;
p->irqaction.dev_id = p;
p->irqaction.flags = IRQF_TIMER;

- p->pclk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->pclk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->pclk);
- }
-
- p->ced.name = pdev->name;
+ p->ced.name = node->name;
p->ced.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT;
p->ced.rating = 200;
@@ -256,64 +259,19 @@ static int timer8_setup(struct timer8_priv *p,

ret = setup_irq(irq, &p->irqaction);
if (ret < 0) {
- dev_err(&p->pdev->dev,
- "failed to request irq %d\n", irq);
- return ret;
- }
- clockevents_register_device(&p->ced);
- platform_set_drvdata(pdev, p);
-
- return 0;
-}
-
-static int timer8_probe(struct platform_device *pdev)
-{
- struct timer8_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
+ pr_err("failed to request irq %d for clockevent\n", irq);
+ goto free_priv;
}
-
- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
-
- return timer8_setup(p, pdev);
-}
-
-static int timer8_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
-
-static const struct of_device_id timer8_of_table[] __maybe_unused = {
- { .compatible = "renesas,8bit-timer" },
- { }
-};
-
-MODULE_DEVICE_TABLE(of, timer8_of_table);
-static struct platform_driver timer8_driver = {
- .probe = timer8_probe,
- .remove = timer8_remove,
- .driver = {
- .name = "h8300-8timer",
- .of_match_table = of_match_ptr(timer8_of_table),
- }
-};
-
-static int __init timer8_init(void)
-{
- return platform_driver_register(&timer8_driver);
-}
-
-static void __exit timer8_exit(void)
-{
- platform_driver_unregister(&timer8_driver);
+ rate = clk_get_rate(clk) / SCALE;
+ clockevents_config_and_register(&p->ced, rate, 1, 0x0000ffff);
+ return;
+
+free_priv:
+ kfree(p);
+unmap_reg:
+ iounmap(base);
+free_clk:
+ clk_put(clk);
}

-subsys_initcall(timer8_init);
-module_exit(timer8_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300 8bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
index 64195fd..2dd4daf 100644
--- a/drivers/clocksource/h8300_tpu.c
+++ b/drivers/clocksource/h8300_tpu.c
@@ -1,5 +1,5 @@
/*
- * H8/300 TPU Driver
+ * H8S TPU Driver
*
* Copyright 2015 Yoshinori Sato <[email protected]>
*
@@ -17,6 +17,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>

#include <asm/irq.h>

@@ -32,7 +34,6 @@
#define TGRD 14

struct tpu_priv {
- struct platform_device *pdev;
struct clocksource cs;
struct clk *clk;
unsigned long mapbase1;
@@ -119,30 +120,39 @@ static void tpu_clocksource_disable(struct clocksource *cs)
#define CH_L 0
#define CH_H 1

-static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
+static void __init h8300_tpu_init(struct device_node *node)
{
- struct resource *res[2];
+ void __iomem *base[2];
+ struct tpu_priv *p;
+ struct clk *clk;

- memset(p, 0, sizeof(*p));
- p->pdev = pdev;
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clocksource\n");
+ return;
+ }

- res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
- res[CH_H] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_H);
- if (!res[CH_L] || !res[CH_H]) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
+ base[CH_L] = of_iomap(node, CH_L);
+ if (!base[CH_L]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto free_clk;
+ }
+ base[CH_H] = of_iomap(node, CH_H);
+ if (!base[CH_H]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto unmap_L;
}

- p->clk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->clk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->clk);
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (!p) {
+ pr_err("failed to allocate memory for clocksource\n");
+ goto unmap_H;
}

- p->mapbase1 = res[CH_L]->start;
- p->mapbase2 = res[CH_H]->start;
+ p->mapbase1 = (unsigned long)base[CH_L];
+ p->mapbase2 = (unsigned long)base[CH_H];

- p->cs.name = pdev->name;
+ p->cs.name = node->name;
p->cs.rating = 200;
p->cs.read = tpu_clocksource_read;
p->cs.enable = tpu_clocksource_enable;
@@ -150,58 +160,15 @@ static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 64);
- platform_set_drvdata(pdev, p);
-
- return 0;
-}
-
-static int tpu_probe(struct platform_device *pdev)
-{
- struct tpu_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
- }
-
- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
-
- return tpu_setup(p, pdev);
-}
-
-static int tpu_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
-
-static const struct of_device_id tpu_of_table[] = {
- { .compatible = "renesas,tpu" },
- { }
-};

-static struct platform_driver tpu_driver = {
- .probe = tpu_probe,
- .remove = tpu_remove,
- .driver = {
- .name = "h8s-tpu",
- .of_match_table = of_match_ptr(tpu_of_table),
- }
-};
-
-static int __init tpu_init(void)
-{
- return platform_driver_register(&tpu_driver);
-}
+ return;

-static void __exit tpu_exit(void)
-{
- platform_driver_unregister(&tpu_driver);
+unmap_H:
+ iounmap(base[CH_H]);
+unmap_L:
+ iounmap(base[CH_H]);
+free_clk:
+ clk_put(clk);
}

-subsys_initcall(tpu_init);
-module_exit(tpu_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8S Timer Pulse Unit Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);
--
2.6.1


2015-11-04 13:49:58

by Daniel Lezcano

[permalink] [raw]
Subject: Re: [PATCH] h8300: Initialize cleanup and remove module code

On 11/04/2015 08:35 AM, Yoshinori Sato wrote:
> h8300's clocksource driver cleanup.
> - Use CLOCKSOURCE_OF_DECLARE
> - Remove module exit

Hi Yoshinori,

the patches does not apply on tip/timers/core.

Also it seems to contain changes not related to initialization cleanups
and module code.

I have a few comment above regarding the initialization.

If you can separate the patches, it will be easier to review.

Thanks.

-- Daniel

> Signed-off-by: Yoshinori Sato <[email protected]>
> ---
> drivers/clocksource/h8300_timer16.c | 133 ++++++++++++-----------------
> drivers/clocksource/h8300_timer8.c | 164 ++++++++++++++----------------------
> drivers/clocksource/h8300_tpu.c | 105 ++++++++---------------
> 3 files changed, 151 insertions(+), 251 deletions(-)
>
> diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
> index 82941c1..e2e10cf 100644
> --- a/drivers/clocksource/h8300_timer16.c
> +++ b/drivers/clocksource/h8300_timer16.c
> @@ -17,6 +17,8 @@
> #include <linux/clk.h>
> #include <linux/io.h>
> #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
>
> #include <asm/segment.h>
> #include <asm/irq.h>
> @@ -47,7 +49,6 @@
> #define ABSOLUTE 1
>
> struct timer16_priv {
> - struct platform_device *pdev;
> struct clocksource cs;
> struct irqaction irqaction;
> unsigned long total_cycles;
> @@ -147,43 +148,58 @@ static void timer16_disable(struct clocksource *cs)
> #define REG_CH 0
> #define REG_COMM 1
>
> -static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
> +static void __init h8300_16timer_init(struct device_node *node)
> {
> - struct resource *res[2];
> + void __iomem *base[2];
> int ret, irq;
> unsigned int ch;
> + struct timer16_priv *p;
> + struct clk *clk;
> +
> + clk = of_clk_get(node, 0);
> + if (IS_ERR(clk)) {
> + pr_err("failed to get clock for clocksource\n");
> + return;
> + }
>
> - memset(p, 0, sizeof(*p));
> - p->pdev = pdev;
> + base[REG_CH] = of_iomap(node, 0);
> + if (!base[0]) {

if (!base[REG_CH]) {

> + pr_err("failed to map registers for clocksource\n");
> + goto free_clk;
> + }
>
> - res[REG_CH] = platform_get_resource(p->pdev,
> - IORESOURCE_MEM, REG_CH);
> - res[REG_COMM] = platform_get_resource(p->pdev,
> - IORESOURCE_MEM, REG_COMM);
> - if (!res[REG_CH] || !res[REG_COMM]) {
> - dev_err(&p->pdev->dev, "failed to get I/O memory\n");
> - return -ENXIO;
> + base[REG_COMM] = of_iomap(node, 1);
> + if (!base[1]) {

if (!base[REG_COMM]) {

> + pr_err("failed to map registers for clocksource\n");
> + goto unmap_ch;
> }
> - irq = platform_get_irq(p->pdev, 0);
> +
> + irq = irq_of_parse_and_map(node, 0);
> if (irq < 0) {
> - dev_err(&p->pdev->dev, "failed to get irq\n");
> - return irq;
> + pr_err("failed to get irq for clockevent\n");
> + goto unmap_comm;
> }
>
> - p->clk = clk_get(&p->pdev->dev, "fck");
> - if (IS_ERR(p->clk)) {
> - dev_err(&p->pdev->dev, "can't get clk\n");
> - return PTR_ERR(p->clk);
> + p = kzalloc(sizeof(*p), GFP_KERNEL);
> + if (!p) {
> + pr_err("failed to allocate memory for clocksource\n");

No need to add an error for an allocation error and as the module
static, this variable could be static also and initialized directly when
declared.

> + goto unmap_comm;
> }
> - of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
>
> - p->pdev = pdev;
> - p->mapbase = res[REG_CH]->start;
> - p->mapcommon = res[REG_COMM]->start;
> + of_property_read_u32(node, "renesas,channel", &ch);
> +
> + p->mapbase = (unsigned long)base[REG_CH];
> + p->mapcommon = (unsigned long)base[REG_COMM];
> p->enb = 1 << ch;
> p->imfa = 1 << ch;
> p->imiea = 1 << (4 + ch);
> - p->cs.name = pdev->name;
> +
> + p->irqaction.name = node->name;
> + p->irqaction.handler = timer16_interrupt;
> + p->irqaction.dev_id = p;
> + p->irqaction.flags = IRQF_TIMER;
> +
> + p->cs.name = node->name;
> p->cs.rating = 200;
> p->cs.read = timer16_clocksource_read;
> p->cs.enable = timer16_enable;
> @@ -191,64 +207,23 @@ static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
> p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
> p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
>
> - ret = request_irq(irq, timer16_interrupt,
> - IRQF_TIMER, pdev->name, p);
> + ret = setup_irq(irq, &p->irqaction);

It is better to keep request_irq.

> if (ret < 0) {
> - dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
> - return ret;
> + pr_err("failed to request irq %d of clocksource\n", irq);
> + goto free_priv;
> }
>
> clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
> -
> - return 0;
> -}


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

2015-11-06 07:03:43

by Yoshinori Sato

[permalink] [raw]
Subject: [PATCH v2] h8300: cleanup startup and remove module code.

h8300's clocksource driver update.
Changes for v1
- Drop non-initialize changes.
- Private data static allocation.
- Avoid magic number.
- Use request_irq.

Signed-off-by: Yoshinori Sato <[email protected]>
---
drivers/clocksource/h8300_timer16.c | 142 +++++++++++++--------------------
drivers/clocksource/h8300_timer8.c | 151 ++++++++++++------------------------
drivers/clocksource/h8300_tpu.c | 118 ++++++++++------------------
3 files changed, 144 insertions(+), 267 deletions(-)

diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
index 82941c1..cdf0d83 100644
--- a/drivers/clocksource/h8300_timer16.c
+++ b/drivers/clocksource/h8300_timer16.c
@@ -17,6 +17,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>

#include <asm/segment.h>
#include <asm/irq.h>
@@ -47,9 +49,7 @@
#define ABSOLUTE 1

struct timer16_priv {
- struct platform_device *pdev;
struct clocksource cs;
- struct irqaction irqaction;
unsigned long total_cycles;
unsigned long mapbase;
unsigned long mapcommon;
@@ -144,111 +144,77 @@ static void timer16_disable(struct clocksource *cs)
p->cs_enabled = false;
}

+static struct timer16_priv timer16_priv = {
+ .cs = {
+ .name = "h8300_16timer",
+ .rating = 200,
+ .read = timer16_clocksource_read,
+ .enable = timer16_enable,
+ .disable = timer16_disable,
+ .mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+};
+
#define REG_CH 0
#define REG_COMM 1

-static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
+static void __init h8300_16timer_init(struct device_node *node)
{
- struct resource *res[2];
+ void __iomem *base[2];
int ret, irq;
unsigned int ch;
+ struct clk *clk;

- memset(p, 0, sizeof(*p));
- p->pdev = pdev;
-
- res[REG_CH] = platform_get_resource(p->pdev,
- IORESOURCE_MEM, REG_CH);
- res[REG_COMM] = platform_get_resource(p->pdev,
- IORESOURCE_MEM, REG_COMM);
- if (!res[REG_CH] || !res[REG_COMM]) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
- }
- irq = platform_get_irq(p->pdev, 0);
- if (irq < 0) {
- dev_err(&p->pdev->dev, "failed to get irq\n");
- return irq;
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clocksource\n");
+ return;
}

- p->clk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->clk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->clk);
+ base[REG_CH] = of_iomap(node, 0);
+ if (!base[REG_CH]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto free_clk;
}
- of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
-
- p->pdev = pdev;
- p->mapbase = res[REG_CH]->start;
- p->mapcommon = res[REG_COMM]->start;
- p->enb = 1 << ch;
- p->imfa = 1 << ch;
- p->imiea = 1 << (4 + ch);
- p->cs.name = pdev->name;
- p->cs.rating = 200;
- p->cs.read = timer16_clocksource_read;
- p->cs.enable = timer16_enable;
- p->cs.disable = timer16_disable;
- p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
- p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;

- ret = request_irq(irq, timer16_interrupt,
- IRQF_TIMER, pdev->name, p);
- if (ret < 0) {
- dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
- return ret;
+ base[REG_COMM] = of_iomap(node, 1);
+ if (!base[REG_COMM]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto unmap_ch;
}

- clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
-
- return 0;
-}
-
-static int timer16_probe(struct platform_device *pdev)
-{
- struct timer16_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq < 0) {
+ pr_err("failed to get irq for clockevent\n");
+ goto unmap_comm;
}

- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
+ of_property_read_u32(node, "renesas,channel", &ch);

- return timer16_setup(p, pdev);
-}
+ timer16_priv.mapbase = (unsigned long)base[REG_CH];
+ timer16_priv.mapcommon = (unsigned long)base[REG_COMM];
+ timer16_priv.enb = 1 << ch;
+ timer16_priv.imfa = 1 << ch;
+ timer16_priv.imiea = 1 << (4 + ch);

-static int timer16_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
-
-static const struct of_device_id timer16_of_table[] = {
- { .compatible = "renesas,16bit-timer" },
- { }
-};
-static struct platform_driver timer16_driver = {
- .probe = timer16_probe,
- .remove = timer16_remove,
- .driver = {
- .name = "h8300h-16timer",
- .of_match_table = of_match_ptr(timer16_of_table),
+ ret = request_irq(irq, timer16_interrupt,
+ IRQF_TIMER, timer16_priv.cs.name, &timer16_priv);
+ if (ret < 0) {
+ pr_err("failed to request irq %d of clocksource\n", irq);
+ goto unmap_comm;
}
-};

-static int __init timer16_init(void)
-{
- return platform_driver_register(&timer16_driver);
-}
+ clocksource_register_hz(&timer16_priv.cs,
+ clk_get_rate(timer16_priv.clk) / 8);
+ return;

-static void __exit timer16_exit(void)
-{
- platform_driver_unregister(&timer16_driver);
+unmap_comm:
+ iounmap(base[REG_COMM]);
+unmap_ch:
+ iounmap(base[REG_CH]);
+free_clk:
+ clk_put(clk);
}

-subsys_initcall(timer16_init);
-module_exit(timer16_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300H 16bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer", h8300_16timer_init);
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index e83db7b..5bb4e09 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -12,13 +12,14 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/clockchips.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>

#include <asm/irq.h>

@@ -39,10 +40,10 @@
#define RELATIVE 0
#define ABSOLUTE 1

+#define SCALE 64
+
struct timer8_priv {
- struct platform_device *pdev;
struct clock_event_device ced;
- struct irqaction irqaction;
unsigned long mapbase;
raw_spinlock_t lock;
unsigned long flags;
@@ -112,7 +113,7 @@ static void timer8_set_next(struct timer8_priv *p, unsigned long delta)

static int timer8_enable(struct timer8_priv *p)
{
- p->rate = clk_get_rate(p->pclk) / 64;
+ p->rate = clk_get_rate(p->pclk) / SCALE;
ctrl_outw(0xffff, p->mapbase + TCORA);
ctrl_outw(0x0000, p->mapbase + _8TCNT);
ctrl_outw(0x0c02, p->mapbase + _8TCR);
@@ -180,7 +181,7 @@ static int timer8_clock_event_periodic(struct clock_event_device *ced)
{
struct timer8_priv *p = ced_to_priv(ced);

- dev_info(&p->pdev->dev, "used for periodic clock events\n");
+ pr_info("%s: used for periodic clock events\n", ced->name);
timer8_stop(p);
timer8_clock_event_start(p, PERIODIC);

@@ -191,7 +192,7 @@ static int timer8_clock_event_oneshot(struct clock_event_device *ced)
{
struct timer8_priv *p = ced_to_priv(ced);

- dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+ pr_info("%s: used for oneshot clock events\n", ced->name);
timer8_stop(p);
timer8_clock_event_start(p, ONESHOT);

@@ -209,111 +210,61 @@ static int timer8_clock_event_next(unsigned long delta,
return 0;
}

-static int timer8_setup(struct timer8_priv *p,
- struct platform_device *pdev)
+static struct timer8_priv timer8_priv = {
+ .ced = {
+ .name = "h8300_8timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = timer8_clock_event_next,
+ .set_state_shutdown = timer8_clock_event_shutdown,
+ .set_state_periodic = timer8_clock_event_periodic,
+ .set_state_oneshot = timer8_clock_event_oneshot,
+ },
+};
+
+static void __init h8300_8timer_init(struct device_node *node)
{
- struct resource *res;
+ void __iomem *base;
int irq;
- int ret;
+ int ret = 0;
+ int rate;
+ struct clk *clk;

- memset(p, 0, sizeof(*p));
- p->pdev = pdev;
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clockevent\n");
+ return;
+ }

- res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("failed to map registers for clockevent\n");
+ goto free_clk;
}

- irq = platform_get_irq(p->pdev, 0);
+ irq = irq_of_parse_and_map(node, 0);
if (irq < 0) {
- dev_err(&p->pdev->dev, "failed to get irq\n");
- return -ENXIO;
+ pr_err("failed to get irq for clockevent\n");
+ goto unmap_reg;
}

- p->mapbase = res->start;
-
- p->irqaction.name = dev_name(&p->pdev->dev);
- p->irqaction.handler = timer8_interrupt;
- p->irqaction.dev_id = p;
- p->irqaction.flags = IRQF_TIMER;
-
- p->pclk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->pclk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->pclk);
- }
+ timer8_priv.mapbase = (unsigned long)base;
+ timer8_priv.pclk = clk;

- p->ced.name = pdev->name;
- p->ced.features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT;
- p->ced.rating = 200;
- p->ced.cpumask = cpumask_of(0);
- p->ced.set_next_event = timer8_clock_event_next;
- p->ced.set_state_shutdown = timer8_clock_event_shutdown;
- p->ced.set_state_periodic = timer8_clock_event_periodic;
- p->ced.set_state_oneshot = timer8_clock_event_oneshot;
-
- ret = setup_irq(irq, &p->irqaction);
+ ret = request_irq(irq, timer8_interrupt,
+ IRQF_TIMER, timer8_priv.ced.name, &timer8_priv);
if (ret < 0) {
- dev_err(&p->pdev->dev,
- "failed to request irq %d\n", irq);
- return ret;
+ pr_err("failed to request irq %d for clockevent\n", irq);
+ goto unmap_reg;
}
- clockevents_register_device(&p->ced);
- platform_set_drvdata(pdev, p);
-
- return 0;
-}
-
-static int timer8_probe(struct platform_device *pdev)
-{
- struct timer8_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
- }
-
- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
-
- return timer8_setup(p, pdev);
-}
-
-static int timer8_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
-
-static const struct of_device_id timer8_of_table[] __maybe_unused = {
- { .compatible = "renesas,8bit-timer" },
- { }
-};
-
-MODULE_DEVICE_TABLE(of, timer8_of_table);
-static struct platform_driver timer8_driver = {
- .probe = timer8_probe,
- .remove = timer8_remove,
- .driver = {
- .name = "h8300-8timer",
- .of_match_table = of_match_ptr(timer8_of_table),
- }
-};
-
-static int __init timer8_init(void)
-{
- return platform_driver_register(&timer8_driver);
-}
-
-static void __exit timer8_exit(void)
-{
- platform_driver_unregister(&timer8_driver);
+ rate = clk_get_rate(clk) / SCALE;
+ clockevents_config_and_register(&timer8_priv.ced, rate, 1, 0x0000ffff);
+ return;
+
+unmap_reg:
+ iounmap(base);
+free_clk:
+ clk_put(clk);
}

-subsys_initcall(timer8_init);
-module_exit(timer8_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300 8bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
index 64195fd..ed0b493 100644
--- a/drivers/clocksource/h8300_tpu.c
+++ b/drivers/clocksource/h8300_tpu.c
@@ -1,5 +1,5 @@
/*
- * H8/300 TPU Driver
+ * H8S TPU Driver
*
* Copyright 2015 Yoshinori Sato <[email protected]>
*
@@ -17,8 +17,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
-
-#include <asm/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>

#define TCR 0
#define TMDR 1
@@ -32,9 +32,7 @@
#define TGRD 14

struct tpu_priv {
- struct platform_device *pdev;
struct clocksource cs;
- struct clk *clk;
unsigned long mapbase1;
unsigned long mapbase2;
raw_spinlock_t lock;
@@ -116,92 +114,54 @@ static void tpu_clocksource_disable(struct clocksource *cs)
p->cs_enabled = false;
}

+static struct tpu_priv tpu_priv = {
+ .cs = {
+ .name = "H8S_TPU",
+ .rating = 200,
+ .read = tpu_clocksource_read,
+ .enable = tpu_clocksource_enable,
+ .disable = tpu_clocksource_disable,
+ .mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+};
+
#define CH_L 0
#define CH_H 1

-static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
+static void __init h8300_tpu_init(struct device_node *node)
{
- struct resource *res[2];
-
- memset(p, 0, sizeof(*p));
- p->pdev = pdev;
+ void __iomem *base[2];
+ struct clk *clk;

- res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
- res[CH_H] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_H);
- if (!res[CH_L] || !res[CH_H]) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clocksource\n");
+ return;
}

- p->clk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->clk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->clk);
+ base[CH_L] = of_iomap(node, CH_L);
+ if (!base[CH_L]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto free_clk;
}
-
- p->mapbase1 = res[CH_L]->start;
- p->mapbase2 = res[CH_H]->start;
-
- p->cs.name = pdev->name;
- p->cs.rating = 200;
- p->cs.read = tpu_clocksource_read;
- p->cs.enable = tpu_clocksource_enable;
- p->cs.disable = tpu_clocksource_disable;
- p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
- p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
- clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 64);
- platform_set_drvdata(pdev, p);
-
- return 0;
-}
-
-static int tpu_probe(struct platform_device *pdev)
-{
- struct tpu_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
+ base[CH_H] = of_iomap(node, CH_H);
+ if (!base[CH_H]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto unmap_L;
}

- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
+ tpu_priv.mapbase1 = (unsigned long)base[CH_L];
+ tpu_priv.mapbase2 = (unsigned long)base[CH_H];

- return tpu_setup(p, pdev);
-}
+ clocksource_register_hz(&tpu_priv.cs, clk_get_rate(clk) / 64);

-static int tpu_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
+ return;

-static const struct of_device_id tpu_of_table[] = {
- { .compatible = "renesas,tpu" },
- { }
-};
-
-static struct platform_driver tpu_driver = {
- .probe = tpu_probe,
- .remove = tpu_remove,
- .driver = {
- .name = "h8s-tpu",
- .of_match_table = of_match_ptr(tpu_of_table),
- }
-};
-
-static int __init tpu_init(void)
-{
- return platform_driver_register(&tpu_driver);
-}
-
-static void __exit tpu_exit(void)
-{
- platform_driver_unregister(&tpu_driver);
+unmap_L:
+ iounmap(base[CH_H]);
+free_clk:
+ clk_put(clk);
}

-subsys_initcall(tpu_init);
-module_exit(tpu_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8S Timer Pulse Unit Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);
--
2.6.1

2015-11-06 11:37:43

by Daniel Lezcano

[permalink] [raw]
Subject: Re: [PATCH v2] h8300: cleanup startup and remove module code.

On 11/06/2015 08:03 AM, Yoshinori Sato wrote:
> h8300's clocksource driver update.
> Changes for v1
> - Drop non-initialize changes.
> - Private data static allocation.
> - Avoid magic number.
> - Use request_irq.

Hi Yoshinori,

thanks for the changes.

Unfortunately, they don't apply.

You should base your changes on top of:

git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git tip/timers/core

In order to have the latest changes with the h8300. One of them in the
removal of the memset.

Regards

-- Daniel

> Signed-off-by: Yoshinori Sato <[email protected]>
> ---
> drivers/clocksource/h8300_timer16.c | 142 +++++++++++++--------------------
> drivers/clocksource/h8300_timer8.c | 151 ++++++++++++------------------------
> drivers/clocksource/h8300_tpu.c | 118 ++++++++++------------------
> 3 files changed, 144 insertions(+), 267 deletions(-)
>
> diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
> index 82941c1..cdf0d83 100644
> --- a/drivers/clocksource/h8300_timer16.c
> +++ b/drivers/clocksource/h8300_timer16.c
> @@ -17,6 +17,8 @@
> #include <linux/clk.h>
> #include <linux/io.h>
> #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
>
> #include <asm/segment.h>
> #include <asm/irq.h>
> @@ -47,9 +49,7 @@
> #define ABSOLUTE 1
>
> struct timer16_priv {
> - struct platform_device *pdev;
> struct clocksource cs;
> - struct irqaction irqaction;
> unsigned long total_cycles;
> unsigned long mapbase;
> unsigned long mapcommon;
> @@ -144,111 +144,77 @@ static void timer16_disable(struct clocksource *cs)
> p->cs_enabled = false;
> }
>
> +static struct timer16_priv timer16_priv = {
> + .cs = {
> + .name = "h8300_16timer",
> + .rating = 200,
> + .read = timer16_clocksource_read,
> + .enable = timer16_enable,
> + .disable = timer16_disable,
> + .mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
> + .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> + },
> +};
> +
> #define REG_CH 0
> #define REG_COMM 1
>
> -static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
> +static void __init h8300_16timer_init(struct device_node *node)
> {
> - struct resource *res[2];
> + void __iomem *base[2];
> int ret, irq;
> unsigned int ch;
> + struct clk *clk;
>
> - memset(p, 0, sizeof(*p));
> - p->pdev = pdev;
> -
> - res[REG_CH] = platform_get_resource(p->pdev,
> - IORESOURCE_MEM, REG_CH);
> - res[REG_COMM] = platform_get_resource(p->pdev,
> - IORESOURCE_MEM, REG_COMM);
> - if (!res[REG_CH] || !res[REG_COMM]) {
> - dev_err(&p->pdev->dev, "failed to get I/O memory\n");
> - return -ENXIO;
> - }
> - irq = platform_get_irq(p->pdev, 0);
> - if (irq < 0) {
> - dev_err(&p->pdev->dev, "failed to get irq\n");
> - return irq;
> + clk = of_clk_get(node, 0);
> + if (IS_ERR(clk)) {
> + pr_err("failed to get clock for clocksource\n");
> + return;
> }
>
> - p->clk = clk_get(&p->pdev->dev, "fck");
> - if (IS_ERR(p->clk)) {
> - dev_err(&p->pdev->dev, "can't get clk\n");
> - return PTR_ERR(p->clk);
> + base[REG_CH] = of_iomap(node, 0);
> + if (!base[REG_CH]) {
> + pr_err("failed to map registers for clocksource\n");
> + goto free_clk;
> }
> - of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
> -
> - p->pdev = pdev;
> - p->mapbase = res[REG_CH]->start;
> - p->mapcommon = res[REG_COMM]->start;
> - p->enb = 1 << ch;
> - p->imfa = 1 << ch;
> - p->imiea = 1 << (4 + ch);
> - p->cs.name = pdev->name;
> - p->cs.rating = 200;
> - p->cs.read = timer16_clocksource_read;
> - p->cs.enable = timer16_enable;
> - p->cs.disable = timer16_disable;
> - p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
> - p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
>
> - ret = request_irq(irq, timer16_interrupt,
> - IRQF_TIMER, pdev->name, p);
> - if (ret < 0) {
> - dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
> - return ret;
> + base[REG_COMM] = of_iomap(node, 1);
> + if (!base[REG_COMM]) {
> + pr_err("failed to map registers for clocksource\n");
> + goto unmap_ch;
> }
>
> - clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
> -
> - return 0;
> -}
> -
> -static int timer16_probe(struct platform_device *pdev)
> -{
> - struct timer16_priv *p = platform_get_drvdata(pdev);
> -
> - if (p) {
> - dev_info(&pdev->dev, "kept as earlytimer\n");
> - return 0;
> + irq = irq_of_parse_and_map(node, 0);
> + if (irq < 0) {
> + pr_err("failed to get irq for clockevent\n");
> + goto unmap_comm;
> }
>
> - p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
> - if (!p)
> - return -ENOMEM;
> + of_property_read_u32(node, "renesas,channel", &ch);
>
> - return timer16_setup(p, pdev);
> -}
> + timer16_priv.mapbase = (unsigned long)base[REG_CH];
> + timer16_priv.mapcommon = (unsigned long)base[REG_COMM];
> + timer16_priv.enb = 1 << ch;
> + timer16_priv.imfa = 1 << ch;
> + timer16_priv.imiea = 1 << (4 + ch);
>
> -static int timer16_remove(struct platform_device *pdev)
> -{
> - return -EBUSY;
> -}
> -
> -static const struct of_device_id timer16_of_table[] = {
> - { .compatible = "renesas,16bit-timer" },
> - { }
> -};
> -static struct platform_driver timer16_driver = {
> - .probe = timer16_probe,
> - .remove = timer16_remove,
> - .driver = {
> - .name = "h8300h-16timer",
> - .of_match_table = of_match_ptr(timer16_of_table),
> + ret = request_irq(irq, timer16_interrupt,
> + IRQF_TIMER, timer16_priv.cs.name, &timer16_priv);
> + if (ret < 0) {
> + pr_err("failed to request irq %d of clocksource\n", irq);
> + goto unmap_comm;
> }
> -};
>
> -static int __init timer16_init(void)
> -{
> - return platform_driver_register(&timer16_driver);
> -}
> + clocksource_register_hz(&timer16_priv.cs,
> + clk_get_rate(timer16_priv.clk) / 8);
> + return;
>
> -static void __exit timer16_exit(void)
> -{
> - platform_driver_unregister(&timer16_driver);
> +unmap_comm:
> + iounmap(base[REG_COMM]);
> +unmap_ch:
> + iounmap(base[REG_CH]);
> +free_clk:
> + clk_put(clk);
> }
>
> -subsys_initcall(timer16_init);
> -module_exit(timer16_exit);
> -MODULE_AUTHOR("Yoshinori Sato");
> -MODULE_DESCRIPTION("H8/300H 16bit Timer Driver");
> -MODULE_LICENSE("GPL v2");
> +CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer", h8300_16timer_init);
> diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
> index e83db7b..5bb4e09 100644
> --- a/drivers/clocksource/h8300_timer8.c
> +++ b/drivers/clocksource/h8300_timer8.c
> @@ -12,13 +12,14 @@
> #include <linux/kernel.h>
> #include <linux/interrupt.h>
> #include <linux/init.h>
> -#include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/clockchips.h>
> #include <linux/module.h>
> #include <linux/clk.h>
> #include <linux/io.h>
> #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
>
> #include <asm/irq.h>
>
> @@ -39,10 +40,10 @@
> #define RELATIVE 0
> #define ABSOLUTE 1
>
> +#define SCALE 64
> +
> struct timer8_priv {
> - struct platform_device *pdev;
> struct clock_event_device ced;
> - struct irqaction irqaction;
> unsigned long mapbase;
> raw_spinlock_t lock;
> unsigned long flags;
> @@ -112,7 +113,7 @@ static void timer8_set_next(struct timer8_priv *p, unsigned long delta)
>
> static int timer8_enable(struct timer8_priv *p)
> {
> - p->rate = clk_get_rate(p->pclk) / 64;
> + p->rate = clk_get_rate(p->pclk) / SCALE;
> ctrl_outw(0xffff, p->mapbase + TCORA);
> ctrl_outw(0x0000, p->mapbase + _8TCNT);
> ctrl_outw(0x0c02, p->mapbase + _8TCR);
> @@ -180,7 +181,7 @@ static int timer8_clock_event_periodic(struct clock_event_device *ced)
> {
> struct timer8_priv *p = ced_to_priv(ced);
>
> - dev_info(&p->pdev->dev, "used for periodic clock events\n");
> + pr_info("%s: used for periodic clock events\n", ced->name);
> timer8_stop(p);
> timer8_clock_event_start(p, PERIODIC);
>
> @@ -191,7 +192,7 @@ static int timer8_clock_event_oneshot(struct clock_event_device *ced)
> {
> struct timer8_priv *p = ced_to_priv(ced);
>
> - dev_info(&p->pdev->dev, "used for oneshot clock events\n");
> + pr_info("%s: used for oneshot clock events\n", ced->name);
> timer8_stop(p);
> timer8_clock_event_start(p, ONESHOT);
>
> @@ -209,111 +210,61 @@ static int timer8_clock_event_next(unsigned long delta,
> return 0;
> }
>
> -static int timer8_setup(struct timer8_priv *p,
> - struct platform_device *pdev)
> +static struct timer8_priv timer8_priv = {
> + .ced = {
> + .name = "h8300_8timer",
> + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
> + .rating = 200,
> + .set_next_event = timer8_clock_event_next,
> + .set_state_shutdown = timer8_clock_event_shutdown,
> + .set_state_periodic = timer8_clock_event_periodic,
> + .set_state_oneshot = timer8_clock_event_oneshot,
> + },
> +};
> +
> +static void __init h8300_8timer_init(struct device_node *node)
> {
> - struct resource *res;
> + void __iomem *base;
> int irq;
> - int ret;
> + int ret = 0;
> + int rate;
> + struct clk *clk;
>
> - memset(p, 0, sizeof(*p));
> - p->pdev = pdev;
> + clk = of_clk_get(node, 0);
> + if (IS_ERR(clk)) {
> + pr_err("failed to get clock for clockevent\n");
> + return;
> + }
>
> - res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
> - if (!res) {
> - dev_err(&p->pdev->dev, "failed to get I/O memory\n");
> - return -ENXIO;
> + base = of_iomap(node, 0);
> + if (!base) {
> + pr_err("failed to map registers for clockevent\n");
> + goto free_clk;
> }
>
> - irq = platform_get_irq(p->pdev, 0);
> + irq = irq_of_parse_and_map(node, 0);
> if (irq < 0) {
> - dev_err(&p->pdev->dev, "failed to get irq\n");
> - return -ENXIO;
> + pr_err("failed to get irq for clockevent\n");
> + goto unmap_reg;
> }
>
> - p->mapbase = res->start;
> -
> - p->irqaction.name = dev_name(&p->pdev->dev);
> - p->irqaction.handler = timer8_interrupt;
> - p->irqaction.dev_id = p;
> - p->irqaction.flags = IRQF_TIMER;
> -
> - p->pclk = clk_get(&p->pdev->dev, "fck");
> - if (IS_ERR(p->pclk)) {
> - dev_err(&p->pdev->dev, "can't get clk\n");
> - return PTR_ERR(p->pclk);
> - }
> + timer8_priv.mapbase = (unsigned long)base;
> + timer8_priv.pclk = clk;
>
> - p->ced.name = pdev->name;
> - p->ced.features = CLOCK_EVT_FEAT_PERIODIC |
> - CLOCK_EVT_FEAT_ONESHOT;
> - p->ced.rating = 200;
> - p->ced.cpumask = cpumask_of(0);
> - p->ced.set_next_event = timer8_clock_event_next;
> - p->ced.set_state_shutdown = timer8_clock_event_shutdown;
> - p->ced.set_state_periodic = timer8_clock_event_periodic;
> - p->ced.set_state_oneshot = timer8_clock_event_oneshot;
> -
> - ret = setup_irq(irq, &p->irqaction);
> + ret = request_irq(irq, timer8_interrupt,
> + IRQF_TIMER, timer8_priv.ced.name, &timer8_priv);
> if (ret < 0) {
> - dev_err(&p->pdev->dev,
> - "failed to request irq %d\n", irq);
> - return ret;
> + pr_err("failed to request irq %d for clockevent\n", irq);
> + goto unmap_reg;
> }
> - clockevents_register_device(&p->ced);
> - platform_set_drvdata(pdev, p);
> -
> - return 0;
> -}
> -
> -static int timer8_probe(struct platform_device *pdev)
> -{
> - struct timer8_priv *p = platform_get_drvdata(pdev);
> -
> - if (p) {
> - dev_info(&pdev->dev, "kept as earlytimer\n");
> - return 0;
> - }
> -
> - p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
> - if (!p)
> - return -ENOMEM;
> -
> - return timer8_setup(p, pdev);
> -}
> -
> -static int timer8_remove(struct platform_device *pdev)
> -{
> - return -EBUSY;
> -}
> -
> -static const struct of_device_id timer8_of_table[] __maybe_unused = {
> - { .compatible = "renesas,8bit-timer" },
> - { }
> -};
> -
> -MODULE_DEVICE_TABLE(of, timer8_of_table);
> -static struct platform_driver timer8_driver = {
> - .probe = timer8_probe,
> - .remove = timer8_remove,
> - .driver = {
> - .name = "h8300-8timer",
> - .of_match_table = of_match_ptr(timer8_of_table),
> - }
> -};
> -
> -static int __init timer8_init(void)
> -{
> - return platform_driver_register(&timer8_driver);
> -}
> -
> -static void __exit timer8_exit(void)
> -{
> - platform_driver_unregister(&timer8_driver);
> + rate = clk_get_rate(clk) / SCALE;
> + clockevents_config_and_register(&timer8_priv.ced, rate, 1, 0x0000ffff);
> + return;
> +
> +unmap_reg:
> + iounmap(base);
> +free_clk:
> + clk_put(clk);
> }
>
> -subsys_initcall(timer8_init);
> -module_exit(timer8_exit);
> -MODULE_AUTHOR("Yoshinori Sato");
> -MODULE_DESCRIPTION("H8/300 8bit Timer Driver");
> -MODULE_LICENSE("GPL v2");
> +CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
> diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
> index 64195fd..ed0b493 100644
> --- a/drivers/clocksource/h8300_tpu.c
> +++ b/drivers/clocksource/h8300_tpu.c
> @@ -1,5 +1,5 @@
> /*
> - * H8/300 TPU Driver
> + * H8S TPU Driver
> *
> * Copyright 2015 Yoshinori Sato <[email protected]>
> *
> @@ -17,8 +17,8 @@
> #include <linux/clk.h>
> #include <linux/io.h>
> #include <linux/of.h>
> -
> -#include <asm/irq.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
>
> #define TCR 0
> #define TMDR 1
> @@ -32,9 +32,7 @@
> #define TGRD 14
>
> struct tpu_priv {
> - struct platform_device *pdev;
> struct clocksource cs;
> - struct clk *clk;
> unsigned long mapbase1;
> unsigned long mapbase2;
> raw_spinlock_t lock;
> @@ -116,92 +114,54 @@ static void tpu_clocksource_disable(struct clocksource *cs)
> p->cs_enabled = false;
> }
>
> +static struct tpu_priv tpu_priv = {
> + .cs = {
> + .name = "H8S_TPU",
> + .rating = 200,
> + .read = tpu_clocksource_read,
> + .enable = tpu_clocksource_enable,
> + .disable = tpu_clocksource_disable,
> + .mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
> + .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> + },
> +};
> +
> #define CH_L 0
> #define CH_H 1
>
> -static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
> +static void __init h8300_tpu_init(struct device_node *node)
> {
> - struct resource *res[2];
> -
> - memset(p, 0, sizeof(*p));
> - p->pdev = pdev;
> + void __iomem *base[2];
> + struct clk *clk;
>
> - res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
> - res[CH_H] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_H);
> - if (!res[CH_L] || !res[CH_H]) {
> - dev_err(&p->pdev->dev, "failed to get I/O memory\n");
> - return -ENXIO;
> + clk = of_clk_get(node, 0);
> + if (IS_ERR(clk)) {
> + pr_err("failed to get clock for clocksource\n");
> + return;
> }
>
> - p->clk = clk_get(&p->pdev->dev, "fck");
> - if (IS_ERR(p->clk)) {
> - dev_err(&p->pdev->dev, "can't get clk\n");
> - return PTR_ERR(p->clk);
> + base[CH_L] = of_iomap(node, CH_L);
> + if (!base[CH_L]) {
> + pr_err("failed to map registers for clocksource\n");
> + goto free_clk;
> }
> -
> - p->mapbase1 = res[CH_L]->start;
> - p->mapbase2 = res[CH_H]->start;
> -
> - p->cs.name = pdev->name;
> - p->cs.rating = 200;
> - p->cs.read = tpu_clocksource_read;
> - p->cs.enable = tpu_clocksource_enable;
> - p->cs.disable = tpu_clocksource_disable;
> - p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
> - p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
> - clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 64);
> - platform_set_drvdata(pdev, p);
> -
> - return 0;
> -}
> -
> -static int tpu_probe(struct platform_device *pdev)
> -{
> - struct tpu_priv *p = platform_get_drvdata(pdev);
> -
> - if (p) {
> - dev_info(&pdev->dev, "kept as earlytimer\n");
> - return 0;
> + base[CH_H] = of_iomap(node, CH_H);
> + if (!base[CH_H]) {
> + pr_err("failed to map registers for clocksource\n");
> + goto unmap_L;
> }
>
> - p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
> - if (!p)
> - return -ENOMEM;
> + tpu_priv.mapbase1 = (unsigned long)base[CH_L];
> + tpu_priv.mapbase2 = (unsigned long)base[CH_H];
>
> - return tpu_setup(p, pdev);
> -}
> + clocksource_register_hz(&tpu_priv.cs, clk_get_rate(clk) / 64);
>
> -static int tpu_remove(struct platform_device *pdev)
> -{
> - return -EBUSY;
> -}
> + return;
>
> -static const struct of_device_id tpu_of_table[] = {
> - { .compatible = "renesas,tpu" },
> - { }
> -};
> -
> -static struct platform_driver tpu_driver = {
> - .probe = tpu_probe,
> - .remove = tpu_remove,
> - .driver = {
> - .name = "h8s-tpu",
> - .of_match_table = of_match_ptr(tpu_of_table),
> - }
> -};
> -
> -static int __init tpu_init(void)
> -{
> - return platform_driver_register(&tpu_driver);
> -}
> -
> -static void __exit tpu_exit(void)
> -{
> - platform_driver_unregister(&tpu_driver);
> +unmap_L:
> + iounmap(base[CH_H]);
> +free_clk:
> + clk_put(clk);
> }
>
> -subsys_initcall(tpu_init);
> -module_exit(tpu_exit);
> -MODULE_AUTHOR("Yoshinori Sato");
> -MODULE_DESCRIPTION("H8S Timer Pulse Unit Driver");
> -MODULE_LICENSE("GPL v2");
> +CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

2015-11-06 16:31:55

by Yoshinori Sato

[permalink] [raw]
Subject: [PATCH v3] h8300: cleanup startup and remove module code.

h8300's clocksource driver update.
Changes for v2
- Diff base on 6ddcedf38a75f94bf662438afd7ed8c7837ab00e

Changes for v1
- Drop non-initialize changes.
- Private data static allocation.
- Avoid magic number.
- Use request_irq.

Signed-off-by: Yoshinori Sato <[email protected]>
---
drivers/clocksource/h8300_timer16.c | 141 +++++++++++++--------------------
drivers/clocksource/h8300_timer8.c | 150 ++++++++++++------------------------
drivers/clocksource/h8300_tpu.c | 117 ++++++++++------------------
3 files changed, 144 insertions(+), 264 deletions(-)

diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
index 0e076c6..cdf0d83 100644
--- a/drivers/clocksource/h8300_timer16.c
+++ b/drivers/clocksource/h8300_timer16.c
@@ -17,6 +17,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>

#include <asm/segment.h>
#include <asm/irq.h>
@@ -47,9 +49,7 @@
#define ABSOLUTE 1

struct timer16_priv {
- struct platform_device *pdev;
struct clocksource cs;
- struct irqaction irqaction;
unsigned long total_cycles;
unsigned long mapbase;
unsigned long mapcommon;
@@ -144,110 +144,77 @@ static void timer16_disable(struct clocksource *cs)
p->cs_enabled = false;
}

+static struct timer16_priv timer16_priv = {
+ .cs = {
+ .name = "h8300_16timer",
+ .rating = 200,
+ .read = timer16_clocksource_read,
+ .enable = timer16_enable,
+ .disable = timer16_disable,
+ .mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+};
+
#define REG_CH 0
#define REG_COMM 1

-static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
+static void __init h8300_16timer_init(struct device_node *node)
{
- struct resource *res[2];
+ void __iomem *base[2];
int ret, irq;
unsigned int ch;
+ struct clk *clk;

- p->pdev = pdev;
-
- res[REG_CH] = platform_get_resource(p->pdev,
- IORESOURCE_MEM, REG_CH);
- res[REG_COMM] = platform_get_resource(p->pdev,
- IORESOURCE_MEM, REG_COMM);
- if (!res[REG_CH] || !res[REG_COMM]) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
- }
- irq = platform_get_irq(p->pdev, 0);
- if (irq < 0) {
- dev_err(&p->pdev->dev, "failed to get irq\n");
- return irq;
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clocksource\n");
+ return;
}

- p->clk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->clk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->clk);
+ base[REG_CH] = of_iomap(node, 0);
+ if (!base[REG_CH]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto free_clk;
}
- of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
-
- p->pdev = pdev;
- p->mapbase = res[REG_CH]->start;
- p->mapcommon = res[REG_COMM]->start;
- p->enb = 1 << ch;
- p->imfa = 1 << ch;
- p->imiea = 1 << (4 + ch);
- p->cs.name = pdev->name;
- p->cs.rating = 200;
- p->cs.read = timer16_clocksource_read;
- p->cs.enable = timer16_enable;
- p->cs.disable = timer16_disable;
- p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
- p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;

- ret = request_irq(irq, timer16_interrupt,
- IRQF_TIMER, pdev->name, p);
- if (ret < 0) {
- dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
- return ret;
+ base[REG_COMM] = of_iomap(node, 1);
+ if (!base[REG_COMM]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto unmap_ch;
}

- clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
-
- return 0;
-}
-
-static int timer16_probe(struct platform_device *pdev)
-{
- struct timer16_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq < 0) {
+ pr_err("failed to get irq for clockevent\n");
+ goto unmap_comm;
}

- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
+ of_property_read_u32(node, "renesas,channel", &ch);

- return timer16_setup(p, pdev);
-}
+ timer16_priv.mapbase = (unsigned long)base[REG_CH];
+ timer16_priv.mapcommon = (unsigned long)base[REG_COMM];
+ timer16_priv.enb = 1 << ch;
+ timer16_priv.imfa = 1 << ch;
+ timer16_priv.imiea = 1 << (4 + ch);

-static int timer16_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
-
-static const struct of_device_id timer16_of_table[] = {
- { .compatible = "renesas,16bit-timer" },
- { }
-};
-static struct platform_driver timer16_driver = {
- .probe = timer16_probe,
- .remove = timer16_remove,
- .driver = {
- .name = "h8300h-16timer",
- .of_match_table = of_match_ptr(timer16_of_table),
+ ret = request_irq(irq, timer16_interrupt,
+ IRQF_TIMER, timer16_priv.cs.name, &timer16_priv);
+ if (ret < 0) {
+ pr_err("failed to request irq %d of clocksource\n", irq);
+ goto unmap_comm;
}
-};

-static int __init timer16_init(void)
-{
- return platform_driver_register(&timer16_driver);
-}
+ clocksource_register_hz(&timer16_priv.cs,
+ clk_get_rate(timer16_priv.clk) / 8);
+ return;

-static void __exit timer16_exit(void)
-{
- platform_driver_unregister(&timer16_driver);
+unmap_comm:
+ iounmap(base[REG_COMM]);
+unmap_ch:
+ iounmap(base[REG_CH]);
+free_clk:
+ clk_put(clk);
}

-subsys_initcall(timer16_init);
-module_exit(timer16_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300H 16bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer", h8300_16timer_init);
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index 6998486..5bb4e09 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -12,13 +12,14 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/clockchips.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>

#include <asm/irq.h>

@@ -39,10 +40,10 @@
#define RELATIVE 0
#define ABSOLUTE 1

+#define SCALE 64
+
struct timer8_priv {
- struct platform_device *pdev;
struct clock_event_device ced;
- struct irqaction irqaction;
unsigned long mapbase;
raw_spinlock_t lock;
unsigned long flags;
@@ -112,7 +113,7 @@ static void timer8_set_next(struct timer8_priv *p, unsigned long delta)

static int timer8_enable(struct timer8_priv *p)
{
- p->rate = clk_get_rate(p->pclk) / 64;
+ p->rate = clk_get_rate(p->pclk) / SCALE;
ctrl_outw(0xffff, p->mapbase + TCORA);
ctrl_outw(0x0000, p->mapbase + _8TCNT);
ctrl_outw(0x0c02, p->mapbase + _8TCR);
@@ -180,7 +181,7 @@ static int timer8_clock_event_periodic(struct clock_event_device *ced)
{
struct timer8_priv *p = ced_to_priv(ced);

- dev_info(&p->pdev->dev, "used for periodic clock events\n");
+ pr_info("%s: used for periodic clock events\n", ced->name);
timer8_stop(p);
timer8_clock_event_start(p, PERIODIC);

@@ -191,7 +192,7 @@ static int timer8_clock_event_oneshot(struct clock_event_device *ced)
{
struct timer8_priv *p = ced_to_priv(ced);

- dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+ pr_info("%s: used for oneshot clock events\n", ced->name);
timer8_stop(p);
timer8_clock_event_start(p, ONESHOT);

@@ -209,110 +210,61 @@ static int timer8_clock_event_next(unsigned long delta,
return 0;
}

-static int timer8_setup(struct timer8_priv *p,
- struct platform_device *pdev)
+static struct timer8_priv timer8_priv = {
+ .ced = {
+ .name = "h8300_8timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = timer8_clock_event_next,
+ .set_state_shutdown = timer8_clock_event_shutdown,
+ .set_state_periodic = timer8_clock_event_periodic,
+ .set_state_oneshot = timer8_clock_event_oneshot,
+ },
+};
+
+static void __init h8300_8timer_init(struct device_node *node)
{
- struct resource *res;
+ void __iomem *base;
int irq;
- int ret;
+ int ret = 0;
+ int rate;
+ struct clk *clk;

- p->pdev = pdev;
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clockevent\n");
+ return;
+ }

- res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("failed to map registers for clockevent\n");
+ goto free_clk;
}

- irq = platform_get_irq(p->pdev, 0);
+ irq = irq_of_parse_and_map(node, 0);
if (irq < 0) {
- dev_err(&p->pdev->dev, "failed to get irq\n");
- return -ENXIO;
+ pr_err("failed to get irq for clockevent\n");
+ goto unmap_reg;
}

- p->mapbase = res->start;
-
- p->irqaction.name = dev_name(&p->pdev->dev);
- p->irqaction.handler = timer8_interrupt;
- p->irqaction.dev_id = p;
- p->irqaction.flags = IRQF_TIMER;
-
- p->pclk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->pclk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->pclk);
- }
+ timer8_priv.mapbase = (unsigned long)base;
+ timer8_priv.pclk = clk;

- p->ced.name = pdev->name;
- p->ced.features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT;
- p->ced.rating = 200;
- p->ced.cpumask = cpumask_of(0);
- p->ced.set_next_event = timer8_clock_event_next;
- p->ced.set_state_shutdown = timer8_clock_event_shutdown;
- p->ced.set_state_periodic = timer8_clock_event_periodic;
- p->ced.set_state_oneshot = timer8_clock_event_oneshot;
-
- ret = setup_irq(irq, &p->irqaction);
+ ret = request_irq(irq, timer8_interrupt,
+ IRQF_TIMER, timer8_priv.ced.name, &timer8_priv);
if (ret < 0) {
- dev_err(&p->pdev->dev,
- "failed to request irq %d\n", irq);
- return ret;
+ pr_err("failed to request irq %d for clockevent\n", irq);
+ goto unmap_reg;
}
- clockevents_register_device(&p->ced);
- platform_set_drvdata(pdev, p);
-
- return 0;
-}
-
-static int timer8_probe(struct platform_device *pdev)
-{
- struct timer8_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
- }
-
- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
-
- return timer8_setup(p, pdev);
-}
-
-static int timer8_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
-
-static const struct of_device_id timer8_of_table[] __maybe_unused = {
- { .compatible = "renesas,8bit-timer" },
- { }
-};
-
-MODULE_DEVICE_TABLE(of, timer8_of_table);
-static struct platform_driver timer8_driver = {
- .probe = timer8_probe,
- .remove = timer8_remove,
- .driver = {
- .name = "h8300-8timer",
- .of_match_table = of_match_ptr(timer8_of_table),
- }
-};
-
-static int __init timer8_init(void)
-{
- return platform_driver_register(&timer8_driver);
-}
-
-static void __exit timer8_exit(void)
-{
- platform_driver_unregister(&timer8_driver);
+ rate = clk_get_rate(clk) / SCALE;
+ clockevents_config_and_register(&timer8_priv.ced, rate, 1, 0x0000ffff);
+ return;
+
+unmap_reg:
+ iounmap(base);
+free_clk:
+ clk_put(clk);
}

-subsys_initcall(timer8_init);
-module_exit(timer8_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300 8bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
index 5487410..ed0b493 100644
--- a/drivers/clocksource/h8300_tpu.c
+++ b/drivers/clocksource/h8300_tpu.c
@@ -1,5 +1,5 @@
/*
- * H8/300 TPU Driver
+ * H8S TPU Driver
*
* Copyright 2015 Yoshinori Sato <[email protected]>
*
@@ -17,8 +17,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
-
-#include <asm/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>

#define TCR 0
#define TMDR 1
@@ -32,9 +32,7 @@
#define TGRD 14

struct tpu_priv {
- struct platform_device *pdev;
struct clocksource cs;
- struct clk *clk;
unsigned long mapbase1;
unsigned long mapbase2;
raw_spinlock_t lock;
@@ -116,91 +114,54 @@ static void tpu_clocksource_disable(struct clocksource *cs)
p->cs_enabled = false;
}

+static struct tpu_priv tpu_priv = {
+ .cs = {
+ .name = "H8S_TPU",
+ .rating = 200,
+ .read = tpu_clocksource_read,
+ .enable = tpu_clocksource_enable,
+ .disable = tpu_clocksource_disable,
+ .mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+};
+
#define CH_L 0
#define CH_H 1

-static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
+static void __init h8300_tpu_init(struct device_node *node)
{
- struct resource *res[2];
-
- p->pdev = pdev;
+ void __iomem *base[2];
+ struct clk *clk;

- res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
- res[CH_H] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_H);
- if (!res[CH_L] || !res[CH_H]) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clocksource\n");
+ return;
}

- p->clk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->clk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->clk);
+ base[CH_L] = of_iomap(node, CH_L);
+ if (!base[CH_L]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto free_clk;
}
-
- p->mapbase1 = res[CH_L]->start;
- p->mapbase2 = res[CH_H]->start;
-
- p->cs.name = pdev->name;
- p->cs.rating = 200;
- p->cs.read = tpu_clocksource_read;
- p->cs.enable = tpu_clocksource_enable;
- p->cs.disable = tpu_clocksource_disable;
- p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
- p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
- clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 64);
- platform_set_drvdata(pdev, p);
-
- return 0;
-}
-
-static int tpu_probe(struct platform_device *pdev)
-{
- struct tpu_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
+ base[CH_H] = of_iomap(node, CH_H);
+ if (!base[CH_H]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto unmap_L;
}

- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
+ tpu_priv.mapbase1 = (unsigned long)base[CH_L];
+ tpu_priv.mapbase2 = (unsigned long)base[CH_H];

- return tpu_setup(p, pdev);
-}
+ clocksource_register_hz(&tpu_priv.cs, clk_get_rate(clk) / 64);

-static int tpu_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
+ return;

-static const struct of_device_id tpu_of_table[] = {
- { .compatible = "renesas,tpu" },
- { }
-};
-
-static struct platform_driver tpu_driver = {
- .probe = tpu_probe,
- .remove = tpu_remove,
- .driver = {
- .name = "h8s-tpu",
- .of_match_table = of_match_ptr(tpu_of_table),
- }
-};
-
-static int __init tpu_init(void)
-{
- return platform_driver_register(&tpu_driver);
-}
-
-static void __exit tpu_exit(void)
-{
- platform_driver_unregister(&tpu_driver);
+unmap_L:
+ iounmap(base[CH_H]);
+free_clk:
+ clk_put(clk);
}

-subsys_initcall(tpu_init);
-module_exit(tpu_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8S Timer Pulse Unit Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);
--
2.6.1

2015-11-06 16:42:32

by Daniel Lezcano

[permalink] [raw]
Subject: Re: [PATCH v3] h8300: cleanup startup and remove module code.

On 11/06/2015 05:31 PM, Yoshinori Sato wrote:
> h8300's clocksource driver update.
> Changes for v2
> - Diff base on 6ddcedf38a75f94bf662438afd7ed8c7837ab00e
>
> Changes for v1
> - Drop non-initialize changes.
> - Private data static allocation.
> - Avoid magic number.
> - Use request_irq.
>
> Signed-off-by: Yoshinori Sato <[email protected]>
> ---

Applied.

Thanks Yoshinori Sato !

-- Daniel

--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog