The properties specified in the wled node could harm connected hardware,
so move the properties to Honami and disable the platform node.
Signed-off-by: Bjorn Andersson <[email protected]>
---
arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 13 +++++++++++++
arch/arm/boot/dts/qcom-pm8941.dtsi | 9 ++-------
2 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 37741725b7bd..a0398b69f4f2 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -403,4 +403,17 @@
qcom,vset-millivolts = <3000>;
};
};
+
+ pm8941@1 {
+ wled@d800 {
+ status = "ok";
+
+ qcom,cs-out;
+ qcom,current-limit = <20>;
+ qcom,current-boost-limit = <805>;
+ qcom,switching-freq = <1600>;
+ qcom,ovp = <29>;
+ qcom,num-strings = <2>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index b0d443999fcc..b73fee57cf18 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -159,17 +159,12 @@
#address-cells = <1>;
#size-cells = <0>;
- wled@d800 {
+ pm8941_wled: wled@d800 {
compatible = "qcom,pm8941-wled";
reg = <0xd800 0x100>;
label = "backlight";
- qcom,cs-out;
- qcom,current-limit = <20>;
- qcom,current-boost-limit = <805>;
- qcom,switching-freq = <1600>;
- qcom,ovp = <29>;
- qcom,num-strings = <2>;
+ status = "disabled";
};
};
};
--
2.4.2