This patch series adds the Ethernet driver for the Freescale
QorIQ Data Path Acceleration Architecture (DPAA).
This version includes changes following the feedback received
on previous versions from Eric Dumazet, Bob Cochran, Joe Perches,
Paul Bolle, Joakim Tjernlund, Scott Wood, David Miller - thank you.
Together with the driver a managed version of alloc_percpu
is provided that simplifies the release of per-CPU memory.
The Freescale DPAA architecture consists in a series of hardware
blocks that support the Ethernet connectivity. The Ethernet driver
depends upon the following drivers that are currently in the Linux
kernel or in review (the underlying drivers are not inter-dependent):
- Peripheral Access Memory Unit (PAMU)
drivers/iommu/fsl_*
- Frame Manager (FMan)
drivers/net/ethernet/freescale/fman
- Queue Manager (QMan), Buffer Manager (BMan)
drivers/soc/fsl/qbman
dpaa_eth interfaces mapping to FMan MACs:
dpaa_eth /eth0\ ... /ethN\
driver | | | |
------------- ---- ----------- ---- -------------
-Ports / Tx Rx \ ... / Tx Rx \
FMan | | | |
-MACs | MAC0 | | MACN |
/ dtsec0 \ ... / dtsecN \ (or tgec)
/ \ / \(or memac)
--------- -------------- --- -------------- ---------
FMan, FMan Port, FMan SP, FMan MURAM drivers
---------------------------------------------------------
FMan HW blocks: MURAM, MACs, Ports, SP
---------------------------------------------------------
dpaa_eth relation to QMan, FMan:
________________________________
dpaa_eth / eth0 \
driver / \
--------- -^- -^- -^- --- ---------
QMan driver / \ / \ / \ \ / | BMan |
|Rx | |Rx | |Tx | |Tx | | driver |
--------- |Dfl| |Err| |Cnf| |FQs| | |
QMan HW |FQ | |FQ | |FQ | | | | |
/ \ / \ / \ \ / | |
--------- --- --- --- -v- ---------
| FMan QMI | |
| FMan HW FMan BMI | BMan HW |
----------------------- --------
where the acronyms used above (and in the code) are:
DPAA = Data Path Acceleration Architecture
FMan = DPAA Frame Manager
QMan = DPAA Queue Manager
BMan = DPAA Buffers Manager
QMI = QMan interface in FMan
BMI = BMan interface in FMan
FMan SP = FMan Storage Profiles
MURAM = Multi-user RAM in FMan
FQ = QMan Frame Queue
Rx Dfl FQ = default reception FQ
Rx Err FQ = Rx error frames FQ
Tx Cnf FQ = Tx confirmation FQ
Tx FQs = transmission frame queues
dtsec = datapath three speed Ethernet controller (10/100/1000 Mbps)
tgec = ten gigabit Ethernet controller (10 Gbps)
memac = multirate Ethernet MAC (10/100/1000/10000)
The latest FMan driver patches were submitted by Igal Liberman:
https://patchwork.ozlabs.org/project/netdev/list/?submitter=64715&state=*
The latest Q/BMan drivers were submitted by Roy Pledge:
https://patchwork.ozlabs.org/project/linuxppc-dev/list/?submitter=66331&state=*
Resent, the first attempt had the From: line misinterpreted.
Changes from v4:
- addressed feedback from Scott Wood and Joe Perches
- fixed spelling
- fixed leak of uninitialized stack to userspace
- fix prints
- replace raw_cpu_ptr() with this_cpu_ptr()
- remove _s from the end of structure names
- remove underscores at start of functions, goto labels
- remove likely in error paths
- use container_of() instead of open casts
- remove priv from the driver name
- move return type on same line with function name
- drop DPA_READ_SKB_PTR/DPA_WRITE_SKB_PTR
Changes from v3:
- removed bogus delay and comment in .ndo_stop implementation
- addressed minor issues reported by David Miller
Changes from v2:
- removed debugfs, moved exports to ethtool statistics
- removed congestion groups Kconfig params
Changes from v1:
- bpool level Kconfig options removed
- print format using pr_fmt, cleaned up prints
- __hot/__cold removed
- gratuitous unlikely() removed
- code style aligned, consistent spacing for declarations
- comment formatting
The complete patch set based on the latest net-next/master kernel
can be found in the public git at:
http://git.freescale.com/git/cgit.cgi/ppc/upstream/linux.git
under the tag ldup_public_git_20151202:
http://git.freescale.com/git/cgit.cgi/ppc/upstream/linux.git/tag/?h=ldup_public_git_20151202
There is one u-boot patch that one needs to make sure it's applied
to align u-boot to the latest device tree binding document specification
used by the FMan driver. Please make sure your u-boot includes this patch:
commit 97a8d010e029111e5711a45264a726bedbeb24c4
Author: Igal Liberman <[email protected]>
Date: Tue Aug 18 14:47:05 2015 +0300
net/fman: Support both new and legacy FMan Compatibles
The patch was included in u-boot in v2015.10-rc3.
Madalin Bucur (8):
devres: add devm_alloc_percpu()
dpaa_eth: add support for DPAA Ethernet
dpaa_eth: add support for S/G frames
dpaa_eth: add driver's Tx queue selection mechanism
dpaa_eth: add ethtool functionality
dpaa_eth: add ethtool statistics
dpaa_eth: add sysfs exports
dpaa_eth: add trace points
Documentation/driver-model/devres.txt | 4 +
drivers/base/devres.c | 64 +
drivers/net/ethernet/freescale/Kconfig | 2 +
drivers/net/ethernet/freescale/Makefile | 1 +
drivers/net/ethernet/freescale/dpaa/Kconfig | 32 +
drivers/net/ethernet/freescale/dpaa/Makefile | 12 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 788 +++++++++++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 464 +++++++
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 1416 ++++++++++++++++++++
.../net/ethernet/freescale/dpaa/dpaa_eth_common.h | 108 ++
drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c | 686 ++++++++++
.../net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c | 167 +++
.../net/ethernet/freescale/dpaa/dpaa_eth_trace.h | 141 ++
drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 414 ++++++
include/linux/device.h | 19 +
15 files changed, 4318 insertions(+)
create mode 100644 drivers/net/ethernet/freescale/dpaa/Kconfig
create mode 100644 drivers/net/ethernet/freescale/dpaa/Makefile
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
--
1.7.11.7
Introduce managed counterparts for alloc_percpu() and free_percpu().
Add devm_alloc_percpu() and devm_free_percpu() into the managed
interfaces list.
Signed-off-by: Madalin Bucur <[email protected]>
Tested-by: Madalin-Cristian Bucur <[email protected]>
---
Documentation/driver-model/devres.txt | 4 +++
drivers/base/devres.c | 64 +++++++++++++++++++++++++++++++++++
include/linux/device.h | 19 +++++++++++
3 files changed, 87 insertions(+)
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index 831a536..595fd1b 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -312,6 +312,10 @@ MEM
devm_kvasprintf()
devm_kzalloc()
+PER-CPU MEM
+ devm_alloc_percpu()
+ devm_free_percpu()
+
PCI
pcim_enable_device() : after success, all PCI ops become managed
pcim_pin_device() : keep PCI device enabled after release
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index 8fc654f..77e658f 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -10,6 +10,7 @@
#include <linux/device.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/percpu.h>
#include "base.h"
@@ -985,3 +986,66 @@ void devm_free_pages(struct device *dev, unsigned long addr)
&devres));
}
EXPORT_SYMBOL_GPL(devm_free_pages);
+
+static void devm_percpu_release(struct device *dev, void *pdata)
+{
+ void __percpu *p;
+
+ p = *(void __percpu **)pdata;
+ free_percpu(p);
+}
+
+static int devm_percpu_match(struct device *dev, void *data, void *p)
+{
+ struct devres *devr = container_of(data, struct devres, data);
+
+ return *(void **)devr->data == p;
+}
+
+/**
+ * __devm_alloc_percpu - Resource-managed alloc_percpu
+ * @dev: Device to allocate per-cpu memory for
+ * @size: Size of per-cpu memory to allocate
+ * @align: Alignment of per-cpu memory to allocate
+ *
+ * Managed alloc_percpu. Per-cpu memory allocated with this function is
+ * automatically freed on driver detach.
+ *
+ * RETURNS:
+ * Pointer to allocated memory on success, NULL on failure.
+ */
+void __percpu *__devm_alloc_percpu(struct device *dev, size_t size,
+ size_t align)
+{
+ void *p;
+ void __percpu *pcpu;
+
+ pcpu = __alloc_percpu(size, align);
+ if (!pcpu)
+ return NULL;
+
+ p = devres_alloc(devm_percpu_release, sizeof(void *), GFP_KERNEL);
+ if (!p)
+ return NULL;
+
+ *(void __percpu **)p = pcpu;
+
+ devres_add(dev, p);
+
+ return pcpu;
+}
+EXPORT_SYMBOL_GPL(__devm_alloc_percpu);
+
+/**
+ * devm_free_percpu - Resource-managed free_percpu
+ * @dev: Device this memory belongs to
+ * @pdata: Per-cpu memory to free
+ *
+ * Free memory allocated with devm_alloc_percpu().
+ */
+void devm_free_percpu(struct device *dev, void __percpu *pdata)
+{
+ WARN_ON(devres_destroy(dev, devm_percpu_release, devm_percpu_match,
+ (void *)pdata));
+}
+EXPORT_SYMBOL_GPL(devm_free_percpu);
diff --git a/include/linux/device.h b/include/linux/device.h
index b8f411b..ef9a86a 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -681,6 +681,25 @@ void __iomem *devm_ioremap_resource(struct device *dev, struct resource *res);
int devm_add_action(struct device *dev, void (*action)(void *), void *data);
void devm_remove_action(struct device *dev, void (*action)(void *), void *data);
+/**
+ * devm_alloc_percpu - Resource-managed alloc_percpu
+ * @dev: Device to allocate per-cpu memory for
+ * @type: Type to allocate per-cpu memory for
+ *
+ * Managed alloc_percpu. Per-cpu memory allocated with this function is
+ * automatically freed on driver detach.
+ *
+ * RETURNS:
+ * Pointer to allocated memory on success, NULL on failure.
+ */
+#define devm_alloc_percpu(dev, type) \
+ (typeof(type) __percpu *)__devm_alloc_percpu(dev, sizeof(type), \
+ __alignof__(type))
+
+void __percpu *__devm_alloc_percpu(struct device *dev, size_t size,
+ size_t align);
+void devm_free_percpu(struct device *dev, void __percpu *pdata);
+
struct device_dma_parameters {
/*
* a low level driver may set these to teach IOMMU code about
--
1.7.11.7
This introduces the Freescale Data Path Acceleration Architecture
(DPAA) Ethernet driver (dpaa_eth) that builds upon the DPAA QMan,
BMan, PAMU and FMan drivers to deliver Ethernet connectivity on
the Freescale DPAA QorIQ platforms.
Signed-off-by: Madalin Bucur <[email protected]>
---
drivers/net/ethernet/freescale/Kconfig | 2 +
drivers/net/ethernet/freescale/Makefile | 1 +
drivers/net/ethernet/freescale/dpaa/Kconfig | 22 +
drivers/net/ethernet/freescale/dpaa/Makefile | 11 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 759 +++++++++++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 417 +++++++
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 1316 ++++++++++++++++++++
.../net/ethernet/freescale/dpaa/dpaa_eth_common.h | 97 ++
drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c | 386 ++++++
9 files changed, 3011 insertions(+)
create mode 100644 drivers/net/ethernet/freescale/dpaa/Kconfig
create mode 100644 drivers/net/ethernet/freescale/dpaa/Makefile
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index f3f89cc..92198be 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -92,4 +92,6 @@ config GIANFAR
and MPC86xx family of chips, the eTSEC on LS1021A and the FEC
on the 8540.
+source "drivers/net/ethernet/freescale/dpaa/Kconfig"
+
endif # NET_VENDOR_FREESCALE
diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile
index 4097c58..ae13dc5 100644
--- a/drivers/net/ethernet/freescale/Makefile
+++ b/drivers/net/ethernet/freescale/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_FS_ENET) += fs_enet/
obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o
obj-$(CONFIG_FSL_XGMAC_MDIO) += xgmac_mdio.o
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
+obj-$(CONFIG_FSL_DPAA_ETH) += dpaa/
obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
gianfar_driver-objs := gianfar.o \
gianfar_ethtool.o
diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig
new file mode 100644
index 0000000..022d5aa
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
@@ -0,0 +1,22 @@
+menuconfig FSL_DPAA_ETH
+ tristate "DPAA Ethernet"
+ depends on FSL_SOC && FSL_BMAN && FSL_QMAN && FSL_FMAN
+ select PHYLIB
+ select FSL_FMAN_MAC
+ ---help---
+ Data Path Acceleration Architecture Ethernet driver,
+ supporting the Freescale QorIQ chips.
+ Depends on Freescale Buffer Manager and Queue Manager
+ driver and Frame Manager Driver.
+
+if FSL_DPAA_ETH
+
+config FSL_DPAA_ETH_FRIENDLY_IF_NAME
+ bool "Use fmX-macY names for the DPAA interfaces"
+ default y
+ ---help---
+ The DPAA Ethernet netdevices are created for each FMan port available
+ on a certain board. Enable this to get interface names derived from
+ the underlying FMan hardware for a simple identification.
+
+endif # FSL_DPAA_ETH
diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile
new file mode 100644
index 0000000..3847ec7
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Freescale DPAA Ethernet controllers
+#
+
+# Include FMan headers
+FMAN = $(srctree)/drivers/net/ethernet/freescale/fman
+ccflags-y += -I$(FMAN)
+
+obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
+
+fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
new file mode 100644
index 0000000..67f89ab
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -0,0 +1,759 @@
+/* Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/kthread.h>
+#include <linux/io.h>
+#include <linux/if_arp.h>
+#include <linux/if_vlan.h>
+#include <linux/icmp.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/udp.h>
+#include <linux/tcp.h>
+#include <linux/net.h>
+#include <linux/if_ether.h>
+#include <linux/highmem.h>
+#include <linux/percpu.h>
+#include <linux/dma-mapping.h>
+#include <soc/fsl/bman.h>
+
+#include "fman.h"
+#include "fman_port.h"
+
+#include "mac.h"
+#include "dpaa_eth.h"
+#include "dpaa_eth_common.h"
+
+/* Valid checksum indication */
+#define DPA_CSUM_VALID 0xFFFF
+
+#define DPAA_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK | NETIF_MSG_IFUP | \
+ NETIF_MSG_IFDOWN)
+
+#define DPAA_INGRESS_CS_THRESHOLD 0x10000000
+/* Ingress congestion threshold on FMan ports
+ * The size in bytes of the ingress tail-drop threshold on FMan ports.
+ * Traffic piling up above this value will be rejected by QMan and discarded
+ * by FMan.
+ */
+
+static int debug = -1;
+module_param(debug, int, S_IRUGO);
+MODULE_PARM_DESC(debug, "Module/Driver verbosity level (0=none,...,16=all)");
+
+static u16 tx_timeout = 1000;
+module_param(tx_timeout, ushort, S_IRUGO);
+MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms");
+
+static u8 dpa_common_bpid;
+
+static void dpa_rx_error(struct net_device *net_dev,
+ const struct dpa_priv *priv,
+ struct dpa_percpu_priv *percpu_priv,
+ const struct qm_fd *fd,
+ u32 fqid)
+{
+ if (net_ratelimit())
+ netif_err(priv, hw, net_dev, "Err FD status = 0x%08x\n",
+ fd->status & FM_FD_STAT_RX_ERRORS);
+
+ percpu_priv->stats.rx_errors++;
+
+ dpa_fd_release(net_dev, fd);
+}
+
+static void dpa_tx_error(struct net_device *net_dev,
+ const struct dpa_priv *priv,
+ struct dpa_percpu_priv *percpu_priv,
+ const struct qm_fd *fd,
+ u32 fqid)
+{
+ struct sk_buff *skb;
+
+ if (net_ratelimit())
+ netif_warn(priv, hw, net_dev, "FD status = 0x%08x\n",
+ fd->status & FM_FD_STAT_TX_ERRORS);
+
+ percpu_priv->stats.tx_errors++;
+
+ /* If we intended the buffers from this frame to go into the bpools
+ * when the FMan transmit was done, we need to put it in manually.
+ */
+ if (fd->bpid != FSL_DPAA_BPID_INV) {
+ dpa_fd_release(net_dev, fd);
+ return;
+ }
+
+ skb = dpa_cleanup_tx_fd(priv, fd);
+ dev_kfree_skb(skb);
+}
+
+static int dpaa_eth_poll(struct napi_struct *napi, int budget)
+{
+ struct dpa_napi_portal *np =
+ container_of(napi, struct dpa_napi_portal, napi);
+
+ int cleaned = qman_p_poll_dqrr(np->p, budget);
+
+ if (cleaned < budget) {
+ int tmp;
+
+ napi_complete(napi);
+ tmp = qman_p_irqsource_add(np->p, QM_PIRQ_DQRI);
+ WARN_ON(tmp);
+ } else if (np->down) {
+ qman_p_irqsource_add(np->p, QM_PIRQ_DQRI);
+ }
+
+ return cleaned;
+}
+
+static void dpa_tx_conf(struct net_device *net_dev,
+ const struct dpa_priv *priv,
+ struct dpa_percpu_priv *percpu_priv,
+ const struct qm_fd *fd,
+ u32 fqid)
+{
+ struct sk_buff *skb;
+
+ if (unlikely(fd->status & FM_FD_STAT_TX_ERRORS) != 0) {
+ if (net_ratelimit())
+ netif_warn(priv, hw, net_dev, "FD status = 0x%08x\n",
+ fd->status & FM_FD_STAT_TX_ERRORS);
+
+ percpu_priv->stats.tx_errors++;
+ }
+
+ skb = dpa_cleanup_tx_fd(priv, fd);
+
+ dev_kfree_skb(skb);
+}
+
+static enum qman_cb_dqrr_result rx_error_dqrr(struct qman_portal *portal,
+ struct qman_fq *fq,
+ const struct qm_dqrr_entry *dq)
+{
+ struct net_device *net_dev;
+ struct dpa_priv *priv;
+ struct dpa_percpu_priv *percpu_priv;
+ int *count_ptr;
+ struct dpa_fq *dpa_fq = container_of(fq, struct dpa_fq, fq_base);
+
+ net_dev = dpa_fq->net_dev;
+ priv = netdev_priv(net_dev);
+
+ percpu_priv = this_cpu_ptr(priv->percpu_priv);
+ count_ptr = this_cpu_ptr(priv->dpa_bp->percpu_count);
+
+ if (dpaa_eth_napi_schedule(percpu_priv, portal))
+ return qman_cb_dqrr_stop;
+
+ if (dpaa_eth_refill_bpools(priv->dpa_bp, count_ptr))
+ /* Unable to refill the buffer pool due to insufficient
+ * system memory. Just release the frame back into the pool,
+ * otherwise we'll soon end up with an empty buffer pool.
+ */
+ dpa_fd_release(net_dev, &dq->fd);
+ else
+ dpa_rx_error(net_dev, priv, percpu_priv, &dq->fd, fq->fqid);
+
+ return qman_cb_dqrr_consume;
+}
+
+static enum qman_cb_dqrr_result rx_default_dqrr(struct qman_portal *portal,
+ struct qman_fq *fq,
+ const struct qm_dqrr_entry *dq)
+{
+ struct net_device *net_dev;
+ struct dpa_priv *priv;
+ struct dpa_percpu_priv *percpu_priv;
+ int *count_ptr;
+ struct dpa_bp *dpa_bp;
+
+ net_dev = ((struct dpa_fq *)fq)->net_dev;
+ priv = netdev_priv(net_dev);
+ dpa_bp = priv->dpa_bp;
+
+ percpu_priv = this_cpu_ptr(priv->percpu_priv);
+ count_ptr = this_cpu_ptr(dpa_bp->percpu_count);
+
+ if (unlikely(dpaa_eth_napi_schedule(percpu_priv, portal)))
+ return qman_cb_dqrr_stop;
+
+ /* Vale of plenty: make sure we didn't run out of buffers */
+
+ if (unlikely(dpaa_eth_refill_bpools(dpa_bp, count_ptr)))
+ /* Unable to refill the buffer pool due to insufficient
+ * system memory. Just release the frame back into the pool,
+ * otherwise we'll soon end up with an empty buffer pool.
+ */
+ dpa_fd_release(net_dev, &dq->fd);
+ else
+ dpa_rx(net_dev, portal, priv, percpu_priv, &dq->fd, fq->fqid,
+ count_ptr);
+
+ return qman_cb_dqrr_consume;
+}
+
+static enum qman_cb_dqrr_result conf_error_dqrr(struct qman_portal *portal,
+ struct qman_fq *fq,
+ const struct qm_dqrr_entry *dq)
+{
+ struct net_device *net_dev;
+ struct dpa_priv *priv;
+ struct dpa_percpu_priv *percpu_priv;
+
+ net_dev = ((struct dpa_fq *)fq)->net_dev;
+ priv = netdev_priv(net_dev);
+
+ percpu_priv = this_cpu_ptr(priv->percpu_priv);
+
+ if (dpaa_eth_napi_schedule(percpu_priv, portal))
+ return qman_cb_dqrr_stop;
+
+ dpa_tx_error(net_dev, priv, percpu_priv, &dq->fd, fq->fqid);
+
+ return qman_cb_dqrr_consume;
+}
+
+static enum qman_cb_dqrr_result conf_dflt_dqrr(struct qman_portal *portal,
+ struct qman_fq *fq,
+ const struct qm_dqrr_entry *dq)
+{
+ struct net_device *net_dev;
+ struct dpa_priv *priv;
+ struct dpa_percpu_priv *percpu_priv;
+
+ net_dev = ((struct dpa_fq *)fq)->net_dev;
+ priv = netdev_priv(net_dev);
+
+ percpu_priv = this_cpu_ptr(priv->percpu_priv);
+
+ if (dpaa_eth_napi_schedule(percpu_priv, portal))
+ return qman_cb_dqrr_stop;
+
+ dpa_tx_conf(net_dev, priv, percpu_priv, &dq->fd, fq->fqid);
+
+ return qman_cb_dqrr_consume;
+}
+
+static void priv_ern(struct qman_portal *portal,
+ struct qman_fq *fq,
+ const struct qm_mr_entry *msg)
+{
+ struct net_device *net_dev;
+ const struct dpa_priv *priv;
+ struct sk_buff *skb;
+ struct dpa_percpu_priv *percpu_priv;
+ const struct qm_fd *fd = &msg->ern.fd;
+
+ net_dev = ((struct dpa_fq *)fq)->net_dev;
+ priv = netdev_priv(net_dev);
+ percpu_priv = this_cpu_ptr(priv->percpu_priv);
+
+ percpu_priv->stats.tx_dropped++;
+ percpu_priv->stats.tx_fifo_errors++;
+
+ /* If we intended this buffer to go into the pool
+ * when the FM was done, we need to put it in
+ * manually.
+ */
+ if (msg->ern.fd.bpid != FSL_DPAA_BPID_INV) {
+ dpa_fd_release(net_dev, fd);
+ return;
+ }
+
+ skb = dpa_cleanup_tx_fd(priv, fd);
+ dev_kfree_skb_any(skb);
+}
+
+static const struct dpa_fq_cbs dpaa_fq_cbs = {
+ .rx_defq = { .cb = { .dqrr = rx_default_dqrr } },
+ .tx_defq = { .cb = { .dqrr = conf_dflt_dqrr } },
+ .rx_errq = { .cb = { .dqrr = rx_error_dqrr } },
+ .tx_errq = { .cb = { .dqrr = conf_error_dqrr } },
+ .egress_ern = { .cb = { .ern = priv_ern } }
+};
+
+static void dpaa_eth_napi_enable(struct dpa_priv *priv)
+{
+ struct dpa_percpu_priv *percpu_priv;
+ int i, j;
+
+ for_each_possible_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+
+ for (j = 0; j < qman_portal_max; j++) {
+ percpu_priv->np[j].down = 0;
+ napi_enable(&percpu_priv->np[j].napi);
+ }
+ }
+}
+
+static void dpaa_eth_napi_disable(struct dpa_priv *priv)
+{
+ struct dpa_percpu_priv *percpu_priv;
+ int i, j;
+
+ for_each_possible_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+
+ for (j = 0; j < qman_portal_max; j++) {
+ percpu_priv->np[j].down = 1;
+ napi_disable(&percpu_priv->np[j].napi);
+ }
+ }
+}
+
+static int dpa_eth_priv_start(struct net_device *net_dev)
+{
+ struct dpa_priv *priv;
+ int err;
+
+ priv = netdev_priv(net_dev);
+ dpaa_eth_napi_enable(priv);
+
+ err = dpa_start(net_dev);
+ if (err < 0)
+ dpaa_eth_napi_disable(priv);
+
+ return err;
+}
+
+static int dpa_eth_priv_stop(struct net_device *net_dev)
+{
+ struct dpa_priv *priv;
+ int err;
+
+ err = dpa_stop(net_dev);
+
+ priv = netdev_priv(net_dev);
+ dpaa_eth_napi_disable(priv);
+
+ return err;
+}
+
+static struct net_device_ops dpaa_ops = {
+ .ndo_open = dpa_eth_priv_start,
+ .ndo_start_xmit = dpa_tx,
+ .ndo_stop = dpa_eth_priv_stop,
+ .ndo_tx_timeout = dpa_timeout,
+ .ndo_get_stats64 = dpa_get_stats64,
+ .ndo_set_mac_address = dpa_set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = dpa_change_mtu,
+ .ndo_set_rx_mode = dpa_set_rx_mode,
+ .ndo_init = dpa_ndo_init,
+ .ndo_set_features = dpa_set_features,
+ .ndo_fix_features = dpa_fix_features,
+};
+
+static int dpa_napi_add(struct net_device *net_dev)
+{
+ struct dpa_priv *priv = netdev_priv(net_dev);
+ struct dpa_percpu_priv *percpu_priv;
+ int i, cpu;
+
+ for_each_possible_cpu(cpu) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, cpu);
+
+ percpu_priv->np = devm_kzalloc(net_dev->dev.parent,
+ qman_portal_max * sizeof(struct dpa_napi_portal),
+ GFP_KERNEL);
+
+ if (!percpu_priv->np)
+ return -ENOMEM;
+
+ for (i = 0; i < qman_portal_max; i++)
+ netif_napi_add(net_dev, &percpu_priv->np[i].napi,
+ dpaa_eth_poll, NAPI_POLL_WEIGHT);
+ }
+
+ return 0;
+}
+
+void dpa_napi_del(struct net_device *net_dev)
+{
+ struct dpa_priv *priv = netdev_priv(net_dev);
+ struct dpa_percpu_priv *percpu_priv;
+ int i, cpu;
+
+ for_each_possible_cpu(cpu) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, cpu);
+
+ if (percpu_priv->np) {
+ for (i = 0; i < qman_portal_max; i++)
+ netif_napi_del(&percpu_priv->np[i].napi);
+
+ devm_kfree(net_dev->dev.parent, percpu_priv->np);
+ }
+ }
+}
+
+static struct dpa_bp *dpa_priv_bp_probe(struct device *dev)
+{
+ struct dpa_bp *dpa_bp;
+
+ dpa_bp = devm_kzalloc(dev, sizeof(*dpa_bp), GFP_KERNEL);
+ if (!dpa_bp)
+ return ERR_PTR(-ENOMEM);
+
+ dpa_bp->percpu_count = devm_alloc_percpu(dev, *dpa_bp->percpu_count);
+ dpa_bp->config_count = FSL_DPAA_ETH_MAX_BUF_COUNT;
+
+ dpa_bp->seed_cb = dpa_bp_seed;
+ dpa_bp->free_buf_cb = dpa_bp_free_pf;
+
+ return dpa_bp;
+}
+
+/* Place all ingress FQs (Rx Default, Rx Error) in a dedicated CGR.
+ * We won't be sending congestion notifications to FMan; for now, we just use
+ * this CGR to generate enqueue rejections to FMan in order to drop the frames
+ * before they reach our ingress queues and eat up memory.
+ */
+static int dpaa_eth_priv_ingress_cgr_init(struct dpa_priv *priv)
+{
+ struct qm_mcc_initcgr initcgr;
+ u32 cs_th;
+ int err;
+
+ err = qman_alloc_cgrid(&priv->ingress_cgr.cgrid);
+ if (err < 0) {
+ if (netif_msg_drv(priv))
+ pr_err("Error %d allocating CGR ID\n", err);
+ goto out_error;
+ }
+
+ /* Enable CS TD, but disable Congestion State Change Notifications. */
+ initcgr.we_mask = QM_CGR_WE_CS_THRES;
+ initcgr.cgr.cscn_en = QM_CGR_EN;
+ cs_th = DPAA_INGRESS_CS_THRESHOLD;
+ qm_cgr_cs_thres_set64(&initcgr.cgr.cs_thres, cs_th, 1);
+
+ initcgr.we_mask |= QM_CGR_WE_CSTD_EN;
+ initcgr.cgr.cstd_en = QM_CGR_EN;
+
+ /* This is actually a hack, because this CGR will be associated with
+ * our affine SWP. However, we'll place our ingress FQs in it.
+ */
+ err = qman_create_cgr(&priv->ingress_cgr, QMAN_CGR_FLAG_USE_INIT,
+ &initcgr);
+ if (err < 0) {
+ if (netif_msg_drv(priv))
+ pr_err("Error %d creating ingress CGR with ID %d\n",
+ err, priv->ingress_cgr.cgrid);
+ qman_release_cgrid(priv->ingress_cgr.cgrid);
+ goto out_error;
+ }
+ if (netif_msg_drv(priv))
+ pr_debug("Created ingress CGR %d for netdev with hwaddr %pM\n",
+ priv->ingress_cgr.cgrid, priv->mac_dev->addr);
+
+ priv->use_ingress_cgr = true;
+
+out_error:
+ return err;
+}
+
+static int dpa_priv_bp_create(struct net_device *net_dev, struct dpa_bp *dpa_bp,
+ size_t count)
+{
+ struct dpa_priv *priv = netdev_priv(net_dev);
+ int i;
+
+ priv->bp_count = count;
+
+ for (i = 0; i < count; i++) {
+ int err;
+
+ err = dpa_bp_alloc(&dpa_bp[i]);
+ if (err < 0) {
+ dpa_bp_free(priv);
+ priv->dpa_bp = NULL;
+ return err;
+ }
+
+ priv->dpa_bp = &dpa_bp[i];
+ }
+
+ dpa_common_bpid = priv->dpa_bp->bpid;
+ return 0;
+}
+
+static const struct of_device_id dpa_match[];
+
+static int dpaa_eth_probe(struct platform_device *pdev)
+{
+ int err = 0, i, channel;
+ struct device *dev;
+ struct dpa_bp *dpa_bp;
+ struct dpa_fq *dpa_fq, *tmp;
+ size_t count = 1;
+ struct net_device *net_dev = NULL;
+ struct dpa_priv *priv = NULL;
+ struct dpa_percpu_priv *percpu_priv;
+ struct fm_port_fqs port_fqs;
+ struct mac_device *mac_dev;
+ struct task_struct *kth;
+
+ dev = &pdev->dev;
+
+ /* Get the buffer pool assigned to this interface;
+ * run only once the default pool probing code
+ */
+ dpa_bp = (dpa_bpid2pool(dpa_common_bpid));
+ if (!dpa_bp)
+ dpa_bp = dpa_priv_bp_probe(dev);
+ if (IS_ERR(dpa_bp))
+ return PTR_ERR(dpa_bp);
+
+ /* Allocate this early, so we can store relevant information in
+ * the private area
+ */
+ net_dev = alloc_etherdev_mq(sizeof(*priv), DPAA_ETH_TX_QUEUES);
+ if (!net_dev) {
+ dev_err(dev, "alloc_etherdev_mq() failed\n");
+ goto alloc_etherdev_mq_failed;
+ }
+
+#ifdef CONFIG_FSL_DPAA_ETH_FRIENDLY_IF_NAME
+ snprintf(net_dev->name, IFNAMSIZ, "fm%d-mac%d",
+ dpa_mac_fman_index_get(pdev),
+ dpa_mac_hw_index_get(pdev));
+#endif
+
+ /* Do this here, so we can be verbose early */
+ SET_NETDEV_DEV(net_dev, dev);
+ dev_set_drvdata(dev, net_dev);
+
+ priv = netdev_priv(net_dev);
+ priv->net_dev = net_dev;
+
+ priv->msg_enable = netif_msg_init(debug, DPAA_MSG_DEFAULT);
+
+ mac_dev = dpa_mac_dev_get(pdev);
+ if (IS_ERR(mac_dev)) {
+ err = PTR_ERR(mac_dev);
+ goto mac_probe_failed;
+ }
+
+ /* We have physical ports, so we need to establish
+ * the buffer layout.
+ */
+ dpa_set_buffers_layout(mac_dev, &priv->buf_layout[0]);
+
+ /* compute the size of the buffers used for reception */
+ dpa_bp->size = dpa_bp_size();
+
+ INIT_LIST_HEAD(&priv->dpa_fq_list);
+
+ memset(&port_fqs, 0, sizeof(port_fqs));
+
+ err = dpa_fq_probe_mac(dev, &priv->dpa_fq_list, &port_fqs, true, RX);
+ if (!err)
+ err = dpa_fq_probe_mac(dev, &priv->dpa_fq_list,
+ &port_fqs, true, TX);
+
+ if (err < 0)
+ goto fq_probe_failed;
+
+ /* bp init */
+
+ err = dpa_priv_bp_create(net_dev, dpa_bp, count);
+
+ if (err < 0)
+ goto bp_create_failed;
+
+ priv->mac_dev = mac_dev;
+
+ channel = dpa_get_channel();
+
+ if (channel < 0) {
+ err = channel;
+ goto get_channel_failed;
+ }
+
+ priv->channel = (u16)channel;
+
+ /* Start a thread that will walk the cpus with affine portals
+ * and add this pool channel to each's dequeue mask.
+ */
+ kth = kthread_run(dpaa_eth_add_channel,
+ (void *)(unsigned long)priv->channel,
+ "dpaa_%p:%d", net_dev, priv->channel);
+ if (!kth) {
+ err = -ENOMEM;
+ goto add_channel_failed;
+ }
+
+ dpa_fq_setup(priv, &dpaa_fq_cbs, priv->mac_dev->port[TX]);
+
+ /* Create a congestion group for this netdev, with
+ * dynamically-allocated CGR ID.
+ * Must be executed after probing the MAC, but before
+ * assigning the egress FQs to the CGRs.
+ */
+ err = dpaa_eth_cgr_init(priv);
+ if (err < 0) {
+ dev_err(dev, "Error initializing CGR\n");
+ goto tx_cgr_init_failed;
+ }
+ err = dpaa_eth_priv_ingress_cgr_init(priv);
+ if (err < 0) {
+ dev_err(dev, "Error initializing ingress CGR\n");
+ goto rx_cgr_init_failed;
+ }
+
+ /* Add the FQs to the interface, and make them active */
+ list_for_each_entry_safe(dpa_fq, tmp, &priv->dpa_fq_list, list) {
+ err = dpa_fq_init(dpa_fq, false);
+ if (err < 0)
+ goto fq_alloc_failed;
+ }
+
+ priv->tx_headroom = dpa_get_headroom(&priv->buf_layout[TX]);
+ priv->rx_headroom = dpa_get_headroom(&priv->buf_layout[RX]);
+
+ /* All real interfaces need their ports initialized */
+ dpaa_eth_init_ports(mac_dev, dpa_bp, count, &port_fqs,
+ &priv->buf_layout[0], dev);
+
+ priv->percpu_priv = devm_alloc_percpu(dev, *priv->percpu_priv);
+
+ if (!priv->percpu_priv) {
+ dev_err(dev, "devm_alloc_percpu() failed\n");
+ err = -ENOMEM;
+ goto alloc_percpu_failed;
+ }
+ for_each_possible_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+ memset(percpu_priv, 0, sizeof(*percpu_priv));
+ }
+
+ /* Initialize NAPI */
+ err = dpa_napi_add(net_dev);
+
+ if (err < 0)
+ goto napi_add_failed;
+
+ err = dpa_netdev_init(net_dev, &dpaa_ops, tx_timeout);
+
+ if (err < 0)
+ goto netdev_init_failed;
+
+ netif_info(priv, probe, net_dev, "Probed interface %s\n",
+ net_dev->name);
+
+ return 0;
+
+netdev_init_failed:
+napi_add_failed:
+ dpa_napi_del(net_dev);
+alloc_percpu_failed:
+ dpa_fq_free(dev, &priv->dpa_fq_list);
+fq_alloc_failed:
+ qman_delete_cgr_safe(&priv->ingress_cgr);
+ qman_release_cgrid(priv->ingress_cgr.cgrid);
+rx_cgr_init_failed:
+ qman_delete_cgr_safe(&priv->cgr_data.cgr);
+ qman_release_cgrid(priv->cgr_data.cgr.cgrid);
+tx_cgr_init_failed:
+add_channel_failed:
+get_channel_failed:
+ dpa_bp_free(priv);
+bp_create_failed:
+fq_probe_failed:
+mac_probe_failed:
+ dev_set_drvdata(dev, NULL);
+ free_netdev(net_dev);
+alloc_etherdev_mq_failed:
+ if (atomic_read(&dpa_bp->refs) == 0)
+ devm_kfree(dev, dpa_bp);
+
+ return err;
+}
+
+static struct platform_device_id dpa_devtype[] = {
+ {
+ .name = "dpaa-ethernet",
+ .driver_data = 0,
+ }, {
+ }
+};
+MODULE_DEVICE_TABLE(platform, dpa_devtype);
+
+static struct platform_driver dpa_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ },
+ .id_table = dpa_devtype,
+ .probe = dpaa_eth_probe,
+ .remove = dpa_remove
+};
+
+static int __init dpa_load(void)
+{
+ int err;
+
+ pr_debug("FSL DPAA Ethernet driver\n");
+
+ /* initialise dpaa_eth mirror values */
+ dpa_rx_extra_headroom = fman_get_rx_extra_headroom();
+ dpa_max_frm = fman_get_max_frm();
+
+ err = platform_driver_register(&dpa_driver);
+ if (err < 0)
+ pr_err("Error, platform_driver_register() = %d\n", err);
+
+ return err;
+}
+module_init(dpa_load);
+
+static void __exit dpa_unload(void)
+{
+ platform_driver_unregister(&dpa_driver);
+
+ /* Only one channel is used and needs to be relased after all
+ * interfaces are removed
+ */
+ dpa_release_channel();
+}
+module_exit(dpa_unload);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("FSL DPAA Ethernet driver");
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
new file mode 100644
index 0000000..45dc62d
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -0,0 +1,417 @@
+/* Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DPA_H
+#define __DPA_H
+
+#include <linux/netdevice.h>
+#include <soc/fsl/qman.h>
+
+#include "fman.h"
+#include "mac.h"
+
+extern int dpa_rx_extra_headroom;
+extern int dpa_max_frm;
+
+#define dpa_get_max_mtu() \
+ (dpa_max_frm - (VLAN_ETH_HLEN + ETH_FCS_LEN))
+
+/* Simple enum of FQ types - used for array indexing */
+enum port_type {RX, TX};
+
+struct dpa_buffer_layout {
+ u16 priv_data_size;
+ u16 data_align;
+};
+
+#define DPA_TX_PRIV_DATA_SIZE 16
+#define DPA_PARSE_RESULTS_SIZE sizeof(struct fman_prs_result)
+#define DPA_TIME_STAMP_SIZE 8
+#define DPA_HASH_RESULTS_SIZE 8
+#define DPA_RX_PRIV_DATA_SIZE (u16)(DPA_TX_PRIV_DATA_SIZE + \
+ dpa_rx_extra_headroom)
+
+#define FM_FD_STAT_RX_ERRORS \
+ (FM_FD_ERR_DMA | FM_FD_ERR_PHYSICAL | \
+ FM_FD_ERR_SIZE | FM_FD_ERR_CLS_DISCARD | \
+ FM_FD_ERR_EXTRACTION | FM_FD_ERR_NO_SCHEME | \
+ FM_FD_ERR_PRS_TIMEOUT | FM_FD_ERR_PRS_ILL_INSTRUCT | \
+ FM_FD_ERR_PRS_HDR_ERR)
+
+#define FM_FD_STAT_TX_ERRORS \
+ (FM_FD_ERR_UNSUPPORTED_FORMAT | \
+ FM_FD_ERR_LENGTH | FM_FD_ERR_DMA)
+
+/* The raw buffer size must be cacheline aligned.
+ * Normally we use 2K buffers.
+ */
+#define DPA_BP_RAW_SIZE 2048
+
+/* FMan-DMA requires 16-byte alignment for Rx buffers, but SKB_DATA_ALIGN is
+ * even stronger (SMP_CACHE_BYTES-aligned), so we just get away with that,
+ * via SKB_WITH_OVERHEAD(). We can't rely on netdev_alloc_frag() giving us
+ * half-page-aligned buffers (can we?), so we reserve some more space
+ * for start-of-buffer alignment.
+ */
+#define dpa_bp_size() (SKB_WITH_OVERHEAD(DPA_BP_RAW_SIZE) - \
+ SMP_CACHE_BYTES)
+/* We must ensure that skb_shinfo is always cacheline-aligned. */
+#define DPA_SKB_SIZE(size) ((size) & ~(SMP_CACHE_BYTES - 1))
+
+/* Largest value that the FQD's OAL field can hold.
+ * This is DPAA-1.x specific.
+ */
+#define FSL_QMAN_MAX_OAL 127
+
+/* Default alignment for start of data in an Rx FD */
+#define DPA_FD_DATA_ALIGNMENT 16
+
+/* Values for the L3R field of the FM Parse Results
+ */
+/* L3 Type field: First IP Present IPv4 */
+#define FM_L3_PARSE_RESULT_IPV4 0x8000
+/* L3 Type field: First IP Present IPv6 */
+#define FM_L3_PARSE_RESULT_IPV6 0x4000
+
+/* Values for the L4R field of the FM Parse Results
+ * See $8.8.4.7.20 - L4 HXS - L4 Results from DPAA-Rev2 Reference Manual.
+ */
+/* L4 Type field: UDP */
+#define FM_L4_PARSE_RESULT_UDP 0x40
+/* L4 Type field: TCP */
+#define FM_L4_PARSE_RESULT_TCP 0x20
+
+/* number of Tx queues to FMan */
+#define DPAA_ETH_TX_QUEUES NR_CPUS
+
+#define DPAA_ETH_RX_QUEUES 128
+
+#define FSL_DPAA_BPID_INV 0xff
+#define FSL_DPAA_ETH_MAX_BUF_COUNT 128
+#define FSL_DPAA_ETH_REFILL_THRESHOLD 80
+
+/* More detailed FQ types - used for fine-grained WQ assignments */
+enum dpa_fq_type {
+ FQ_TYPE_RX_DEFAULT = 1, /* Rx Default FQs */
+ FQ_TYPE_RX_ERROR, /* Rx Error FQs */
+ FQ_TYPE_RX_PCD, /* User-defined PCDs */
+ FQ_TYPE_TX, /* "Real" Tx FQs */
+ FQ_TYPE_TX_CONFIRM, /* Tx default Conf FQ (actually an Rx FQ) */
+ FQ_TYPE_TX_CONF_MQ, /* Tx conf FQs (one for each Tx FQ) */
+ FQ_TYPE_TX_ERROR, /* Tx Error FQs (these are actually Rx FQs) */
+};
+
+struct dpa_fq {
+ struct qman_fq fq_base;
+ struct list_head list;
+ struct net_device *net_dev;
+ bool init;
+ u32 fqid;
+ u32 flags;
+ u16 channel;
+ u8 wq;
+ enum dpa_fq_type fq_type;
+};
+
+struct dpa_fq_cbs {
+ struct qman_fq rx_defq;
+ struct qman_fq tx_defq;
+ struct qman_fq rx_errq;
+ struct qman_fq tx_errq;
+ struct qman_fq egress_ern;
+};
+
+struct fqid_cell {
+ u32 start;
+ u32 count;
+};
+
+struct dpa_bp {
+ struct bman_pool *pool;
+ u8 bpid;
+ struct device *dev;
+ /* the buffer pools are initialized with config_count buffers for each
+ * CPU; at runtime the number of buffers per CPU is constantly brought
+ * back to this level
+ */
+ int config_count;
+ size_t size;
+ bool seed_pool;
+ /* physical address of the contiguous memory used by the pool to store
+ * the buffers
+ */
+ dma_addr_t paddr;
+ /* virtual address of the contiguous memory used by the pool to store
+ * the buffers
+ */
+ void __iomem *vaddr;
+ /* current number of buffers in the bpool alloted to this CPU */
+ int __percpu *percpu_count;
+ atomic_t refs;
+ /* some bpools need to be seeded before use by this cb */
+ int (*seed_cb)(struct dpa_bp *);
+ /* some bpools need to be emptied before freeing; this cb is used
+ * for freeing of individual buffers taken from the pool
+ */
+ void (*free_buf_cb)(void *addr);
+};
+
+struct dpa_napi_portal {
+ struct napi_struct napi;
+ struct qman_portal *p;
+ bool down;
+};
+
+struct dpa_percpu_priv {
+ struct net_device *net_dev;
+ struct dpa_napi_portal *np;
+ struct rtnl_link_stats64 stats;
+};
+
+struct dpa_priv {
+ struct dpa_percpu_priv __percpu *percpu_priv;
+ struct dpa_bp *dpa_bp;
+ /* Store here the needed Tx headroom for convenience and speed
+ * (even though it can be computed based on the fields of buf_layout)
+ */
+ u16 tx_headroom;
+ struct net_device *net_dev;
+ struct mac_device *mac_dev;
+ struct qman_fq *egress_fqs[DPAA_ETH_TX_QUEUES];
+ struct qman_fq *conf_fqs[DPAA_ETH_TX_QUEUES];
+
+ size_t bp_count;
+
+ u16 channel; /* "fsl,qman-channel-id" */
+ struct list_head dpa_fq_list;
+
+ u32 msg_enable; /* net_device message level */
+
+ struct {
+ /* All egress queues to a given net device belong to one
+ * (and the same) congestion group.
+ */
+ struct qman_cgr cgr;
+ } cgr_data;
+ /* Use a per-port CGR for ingress traffic. */
+ bool use_ingress_cgr;
+ struct qman_cgr ingress_cgr;
+
+ struct dpa_buffer_layout buf_layout[2];
+ u16 rx_headroom;
+};
+
+struct fm_port_fqs {
+ struct dpa_fq *tx_defq;
+ struct dpa_fq *tx_errq;
+ struct dpa_fq *rx_defq;
+ struct dpa_fq *rx_errq;
+};
+
+int dpa_bp_seed(struct dpa_bp *dpa_bp);
+int dpaa_eth_refill_bpools(struct dpa_bp *dpa_bp, int *count_ptr);
+void dpa_rx(struct net_device *net_dev,
+ struct qman_portal *portal,
+ const struct dpa_priv *priv,
+ struct dpa_percpu_priv *percpu_priv,
+ const struct qm_fd *fd,
+ u32 fqid,
+ int *count_ptr);
+int dpa_tx(struct sk_buff *skb, struct net_device *net_dev);
+struct sk_buff *dpa_cleanup_tx_fd(const struct dpa_priv *priv,
+ const struct qm_fd *fd);
+
+/* Turn on HW checksum computation for this outgoing frame.
+ * If the current protocol is not something we support in this regard
+ * (or if the stack has already computed the SW checksum), we do nothing.
+ *
+ * Returns 0 if all goes well (or HW csum doesn't apply), and a negative value
+ * otherwise.
+ *
+ * Note that this function may modify the fd->cmd field and the skb data buffer
+ * (the Parse Results area).
+ */
+int dpa_enable_tx_csum(struct dpa_priv *priv, struct sk_buff *skb,
+ struct qm_fd *fd, char *parse_results);
+
+static inline int dpaa_eth_napi_schedule(struct dpa_percpu_priv *percpu_priv,
+ struct qman_portal *portal)
+{
+ if (unlikely(in_irq() || !in_serving_softirq())) {
+ /* Disable QMan IRQ and invoke NAPI */
+ int ret = qman_p_irqsource_remove(portal, QM_PIRQ_DQRI);
+
+ if (likely(!ret)) {
+ const struct qman_portal_config *pc =
+ qman_p_get_portal_config(portal);
+ struct dpa_napi_portal *np =
+ &percpu_priv->np[pc->channel];
+
+ np->p = portal;
+ napi_schedule(&np->napi);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static inline ssize_t __const dpa_fd_length(const struct qm_fd *fd)
+{
+ return fd->length20;
+}
+
+static inline ssize_t __const dpa_fd_offset(const struct qm_fd *fd)
+{
+ return fd->offset;
+}
+
+/* Verifies if the skb length is below the interface MTU */
+static inline int dpa_check_rx_mtu(struct sk_buff *skb, int mtu)
+{
+ if (unlikely(skb->len > mtu))
+ if ((skb->protocol != htons(ETH_P_8021Q)) ||
+ (skb->len > mtu + 4))
+ return -1;
+
+ return 0;
+}
+
+static inline u16 dpa_get_headroom(struct dpa_buffer_layout *bl)
+{
+ u16 headroom;
+ /* The frame headroom must accommodate:
+ * - the driver private data area
+ * - parse results, hash results, timestamp if selected
+ * If either hash results or time stamp are selected, both will
+ * be copied to/from the frame headroom, as TS is located between PR and
+ * HR in the IC and IC copy size has a granularity of 16bytes
+ * (see description of FMBM_RICP and FMBM_TICP registers in DPAARM)
+ *
+ * Also make sure the headroom is a multiple of data_align bytes
+ */
+ headroom = (u16)(bl->priv_data_size + DPA_PARSE_RESULTS_SIZE +
+ DPA_TIME_STAMP_SIZE + DPA_HASH_RESULTS_SIZE);
+
+ return bl->data_align ? ALIGN(headroom, bl->data_align) : headroom;
+}
+
+void dpa_napi_del(struct net_device *net_dev);
+
+static inline void clear_fd(struct qm_fd *fd)
+{
+ fd->opaque_addr = 0;
+ fd->opaque = 0;
+ fd->cmd = 0;
+}
+
+static inline int dpa_tx_fq_to_id(const struct dpa_priv *priv,
+ struct qman_fq *tx_fq)
+{
+ int i;
+
+ for (i = 0; i < DPAA_ETH_TX_QUEUES; i++)
+ if (priv->egress_fqs[i] == tx_fq)
+ return i;
+
+ return -EINVAL;
+}
+
+static inline int dpa_xmit(struct dpa_priv *priv,
+ struct rtnl_link_stats64 *percpu_stats,
+ int queue,
+ struct qm_fd *fd)
+{
+ int err, i;
+ struct qman_fq *egress_fq;
+
+ egress_fq = priv->egress_fqs[queue];
+ if (fd->bpid == FSL_DPAA_BPID_INV)
+ fd->cmd |= qman_fq_fqid(priv->conf_fqs[queue]);
+
+ for (i = 0; i < 100000; i++) {
+ err = qman_enqueue(egress_fq, fd, 0);
+ if (err != -EBUSY)
+ break;
+ }
+
+ if (unlikely(err < 0)) {
+ percpu_stats->tx_errors++;
+ percpu_stats->tx_fifo_errors++;
+ return err;
+ }
+
+ percpu_stats->tx_packets++;
+ percpu_stats->tx_bytes += dpa_fd_length(fd);
+
+ return 0;
+}
+
+/* Use multiple WQs for FQ assignment:
+ * - Tx Confirmation queues go to WQ1.
+ * - Rx Default and Tx queues go to WQ3 (no differentiation between
+ * Rx and Tx traffic).
+ * - Rx Error and Tx Error queues go to WQ2 (giving them a better chance
+ * to be scheduled, in case there are many more FQs in WQ3).
+ * This ensures that Tx-confirmed buffers are timely released. In particular,
+ * it avoids congestion on the Tx Confirm FQs, which can pile up PFDRs if they
+ * are greatly outnumbered by other FQs in the system, while
+ * dequeue scheduling is round-robin.
+ */
+static inline void _dpa_assign_wq(struct dpa_fq *fq)
+{
+ switch (fq->fq_type) {
+ case FQ_TYPE_TX_CONFIRM:
+ case FQ_TYPE_TX_CONF_MQ:
+ fq->wq = 1;
+ break;
+ case FQ_TYPE_RX_DEFAULT:
+ case FQ_TYPE_TX:
+ fq->wq = 3;
+ break;
+ case FQ_TYPE_RX_ERROR:
+ case FQ_TYPE_TX_ERROR:
+ fq->wq = 2;
+ break;
+ default:
+ WARN(1, "Invalid FQ type %d for FQID %d!\n",
+ fq->fq_type, fq->fqid);
+ }
+}
+
+/* Use the queue selected by XPS */
+#define dpa_get_queue_mapping(skb) \
+ skb_get_queue_mapping(skb)
+
+static inline void dpa_bp_free_pf(void *addr)
+{
+ put_page(virt_to_head_page(addr));
+}
+
+#endif /* __DPA_H */
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
new file mode 100644
index 0000000..c96995c
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -0,0 +1,1316 @@
+/* Copyright 2008 - 2015 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_net.h>
+#include <linux/etherdevice.h>
+#include <linux/kthread.h>
+#include <linux/percpu.h>
+#include <linux/highmem.h>
+#include <linux/sort.h>
+#include <soc/fsl/qman.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/if_vlan.h>
+#include "dpaa_eth.h"
+#include "dpaa_eth_common.h"
+#include "mac.h"
+
+/* Size in bytes of the FQ taildrop threshold */
+#define DPA_FQ_TD 0x200000
+
+#define DPAA_CS_THRESHOLD_1G 0x06000000
+/* Egress congestion threshold on 1G ports, range 0x1000 .. 0x10000000
+ * The size in bytes of the egress Congestion State notification threshold on
+ * 1G ports. The 1G dTSECs can quite easily be flooded by cores doing Tx in a
+ * tight loop (e.g. by sending UDP datagrams at "while(1) speed"),
+ * and the larger the frame size, the more acute the problem.
+ * So we have to find a balance between these factors:
+ * - avoiding the device staying congested for a prolonged time (risking
+ * the netdev watchdog to fire - see also the tx_timeout module param);
+ * - affecting performance of protocols such as TCP, which otherwise
+ * behave well under the congestion notification mechanism;
+ * - preventing the Tx cores from tightly-looping (as if the congestion
+ * threshold was too low to be effective);
+ * - running out of memory if the CS threshold is set too high.
+ */
+
+#define DPAA_CS_THRESHOLD_10G 0x10000000
+/* The size in bytes of the egress Congestion State notification threshold on
+ * 10G ports, range 0x1000 .. 0x10000000
+ */
+
+static struct dpa_bp *dpa_bp_array[64];
+
+int dpa_max_frm;
+
+int dpa_rx_extra_headroom;
+
+enum fq_groups {
+ DPAA_ETH_ERROR_FQ_GRP = 0,
+ DPAA_ETH_DEFLT_FQ_GRP,
+ DPAA_ETH_TXCNF_FQ_GRP,
+ DPAA_ETH_FQ_GRP_COUNT
+};
+
+static const struct fqid_cell tx_confirm_fqids[] = {
+ {0, DPAA_ETH_TX_QUEUES}
+};
+
+static const struct fqid_cell default_fqids[][DPAA_ETH_FQ_GRP_COUNT] = {
+ [RX] = { {0, 1}, {0, 1}, {0, DPAA_ETH_RX_QUEUES} },
+ [TX] = { {0, 1}, {0, 1}, {0, DPAA_ETH_TX_QUEUES} }
+};
+
+int dpa_netdev_init(struct net_device *net_dev,
+ const struct net_device_ops *dpaa_ops, u16 tx_timeout)
+{
+ int i, err;
+ struct dpa_priv *priv = netdev_priv(net_dev);
+ struct dpa_percpu_priv *percpu_priv;
+ const u8 *mac_addr;
+ struct device *dev = net_dev->dev.parent;
+
+ /* Although we access another CPU's private data here
+ * we do it at initialization so it is safe
+ */
+ for_each_possible_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+ percpu_priv->net_dev = net_dev;
+ }
+
+ net_dev->netdev_ops = dpaa_ops;
+ mac_addr = priv->mac_dev->addr;
+
+ net_dev->mem_start = priv->mac_dev->res->start;
+ net_dev->mem_end = priv->mac_dev->res->end;
+
+ net_dev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_LLTX);
+
+ net_dev->features |= NETIF_F_GSO;
+
+ net_dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
+ /* we do not want shared skbs on TX */
+ net_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+
+ net_dev->features |= net_dev->hw_features;
+ net_dev->vlan_features = net_dev->features;
+
+ memcpy(net_dev->perm_addr, mac_addr, net_dev->addr_len);
+ memcpy(net_dev->dev_addr, mac_addr, net_dev->addr_len);
+
+ net_dev->needed_headroom = priv->tx_headroom;
+ net_dev->watchdog_timeo = msecs_to_jiffies(tx_timeout);
+
+ /* start without the RUNNING flag, phylib controls it later */
+ netif_carrier_off(net_dev);
+
+ err = register_netdev(net_dev);
+ if (err < 0) {
+ dev_err(dev, "register_netdev() = %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+int dpa_start(struct net_device *net_dev)
+{
+ int err, i;
+ struct dpa_priv *priv;
+ struct mac_device *mac_dev;
+
+ priv = netdev_priv(net_dev);
+ mac_dev = priv->mac_dev;
+
+ err = mac_dev->init_phy(net_dev, priv->mac_dev);
+ if (err < 0) {
+ netif_err(priv, ifup, net_dev, "init_phy() = %d\n", err);
+ return err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++) {
+ err = fman_port_enable(mac_dev->port[i]);
+ if (err)
+ goto mac_start_failed;
+ }
+
+ err = priv->mac_dev->start(mac_dev);
+ if (err < 0) {
+ netif_err(priv, ifup, net_dev, "mac_dev->start() = %d\n", err);
+ goto mac_start_failed;
+ }
+
+ netif_tx_start_all_queues(net_dev);
+
+ return 0;
+
+mac_start_failed:
+ for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++)
+ fman_port_disable(mac_dev->port[i]);
+
+ return err;
+}
+
+int dpa_stop(struct net_device *net_dev)
+{
+ int i, err, error;
+ struct dpa_priv *priv;
+ struct mac_device *mac_dev;
+
+ priv = netdev_priv(net_dev);
+ mac_dev = priv->mac_dev;
+
+ netif_tx_stop_all_queues(net_dev);
+ /* Allow the Fman (Tx) port to process in-flight frames before we
+ * try switching it off.
+ */
+ usleep_range(5000, 10000);
+
+ err = mac_dev->stop(mac_dev);
+ if (err < 0)
+ netif_err(priv, ifdown, net_dev, "mac_dev->stop() = %d\n",
+ err);
+
+ for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++) {
+ error = fman_port_disable(mac_dev->port[i]);
+ if (error)
+ err = error;
+ }
+
+ if (mac_dev->phy_dev)
+ phy_disconnect(mac_dev->phy_dev);
+ mac_dev->phy_dev = NULL;
+
+ return err;
+}
+
+void dpa_timeout(struct net_device *net_dev)
+{
+ const struct dpa_priv *priv;
+ struct dpa_percpu_priv *percpu_priv;
+
+ priv = netdev_priv(net_dev);
+ percpu_priv = this_cpu_ptr(priv->percpu_priv);
+
+ netif_crit(priv, timer, net_dev, "Transmit timeout latency: %u ms\n",
+ jiffies_to_msecs(jiffies - net_dev->trans_start));
+
+ percpu_priv->stats.tx_errors++;
+}
+
+/* Calculates the statistics for the given device by adding the statistics
+ * collected by each CPU.
+ */
+struct rtnl_link_stats64 *dpa_get_stats64(struct net_device *net_dev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct dpa_priv *priv = netdev_priv(net_dev);
+ u64 *cpustats;
+ u64 *netstats = (u64 *)stats;
+ int i, j;
+ struct dpa_percpu_priv *percpu_priv;
+ int numstats = sizeof(struct rtnl_link_stats64) / sizeof(u64);
+
+ for_each_possible_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+
+ cpustats = (u64 *)&percpu_priv->stats;
+
+ for (j = 0; j < numstats; j++)
+ netstats[j] += cpustats[j];
+ }
+
+ return stats;
+}
+
+int dpa_change_mtu(struct net_device *net_dev, int new_mtu)
+{
+ const int max_mtu = dpa_get_max_mtu();
+
+ /* Make sure we don't exceed the Ethernet controller's MAXFRM */
+ if (new_mtu < 68 || new_mtu > max_mtu) {
+ netdev_err(net_dev, "Invalid L3 mtu %d (must be between %d and %d).\n",
+ new_mtu, 68, max_mtu);
+ return -EINVAL;
+ }
+ net_dev->mtu = new_mtu;
+
+ return 0;
+}
+
+/* .ndo_init callback */
+int dpa_ndo_init(struct net_device *net_dev)
+{
+ /* If fsl_fm_max_frm is set to a higher value than the all-common 1500,
+ * we choose conservatively and let the user explicitly set a higher
+ * MTU via ifconfig. Otherwise, the user may end up with different MTUs
+ * in the same LAN.
+ * If on the other hand fsl_fm_max_frm has been chosen below 1500,
+ * start with the maximum allowed.
+ */
+ int init_mtu = min(dpa_get_max_mtu(), ETH_DATA_LEN);
+
+ netdev_dbg(net_dev, "Setting initial MTU on net device: %d\n",
+ init_mtu);
+ net_dev->mtu = init_mtu;
+
+ return 0;
+}
+
+int dpa_set_features(struct net_device *dev, netdev_features_t features)
+{
+ /* Not much to do here for now */
+ dev->features = features;
+ return 0;
+}
+
+netdev_features_t dpa_fix_features(struct net_device *dev,
+ netdev_features_t features)
+{
+ netdev_features_t unsupported_features = 0;
+
+ /* In theory we should never be requested to enable features that
+ * we didn't set in netdev->features and netdev->hw_features at probe
+ * time, but double check just to be on the safe side.
+ * We don't support enabling Rx csum through ethtool yet
+ */
+ unsupported_features |= NETIF_F_RXCSUM;
+
+ features &= ~unsupported_features;
+
+ return features;
+}
+
+int dpa_remove(struct platform_device *pdev)
+{
+ int err;
+ struct device *dev;
+ struct net_device *net_dev;
+ struct dpa_priv *priv;
+
+ dev = &pdev->dev;
+ net_dev = dev_get_drvdata(dev);
+
+ priv = netdev_priv(net_dev);
+
+ dev_set_drvdata(dev, NULL);
+ unregister_netdev(net_dev);
+
+ err = dpa_fq_free(dev, &priv->dpa_fq_list);
+
+ qman_delete_cgr_safe(&priv->ingress_cgr);
+ qman_release_cgrid(priv->ingress_cgr.cgrid);
+ qman_delete_cgr_safe(&priv->cgr_data.cgr);
+ qman_release_cgrid(priv->cgr_data.cgr.cgrid);
+
+ dpa_napi_del(net_dev);
+
+ dpa_bp_free(priv);
+
+ free_netdev(net_dev);
+
+ return err;
+}
+
+struct mac_device *dpa_mac_dev_get(struct platform_device *pdev)
+{
+ struct device *dpa_dev, *dev;
+ struct device_node *mac_node;
+ struct platform_device *of_dev;
+ struct mac_device *mac_dev;
+ struct dpaa_eth_data *eth_data;
+
+ dpa_dev = &pdev->dev;
+ eth_data = dpa_dev->platform_data;
+ if (!eth_data)
+ return ERR_PTR(-ENODEV);
+
+ mac_node = eth_data->mac_node;
+
+ of_dev = of_find_device_by_node(mac_node);
+ if (!of_dev) {
+ dev_err(dpa_dev, "of_find_device_by_node(%s) failed\n",
+ mac_node->full_name);
+ of_node_put(mac_node);
+ return ERR_PTR(-EINVAL);
+ }
+ of_node_put(mac_node);
+
+ dev = &of_dev->dev;
+
+ mac_dev = dev_get_drvdata(dev);
+ if (!mac_dev) {
+ dev_err(dpa_dev, "dev_get_drvdata(%s) failed\n",
+ dev_name(dev));
+ return ERR_PTR(-EINVAL);
+ }
+
+ return mac_dev;
+}
+
+int dpa_mac_hw_index_get(struct platform_device *pdev)
+{
+ struct device *dpa_dev;
+ struct dpaa_eth_data *eth_data;
+
+ dpa_dev = &pdev->dev;
+ eth_data = dpa_dev->platform_data;
+
+ return eth_data->mac_hw_id;
+}
+
+int dpa_mac_fman_index_get(struct platform_device *pdev)
+{
+ struct device *dpa_dev;
+ struct dpaa_eth_data *eth_data;
+
+ dpa_dev = &pdev->dev;
+ eth_data = dpa_dev->platform_data;
+
+ return eth_data->fman_hw_id;
+}
+
+int dpa_set_mac_address(struct net_device *net_dev, void *addr)
+{
+ const struct dpa_priv *priv;
+ int err;
+ struct mac_device *mac_dev;
+
+ priv = netdev_priv(net_dev);
+
+ err = eth_mac_addr(net_dev, addr);
+ if (err < 0) {
+ netif_err(priv, drv, net_dev, "eth_mac_addr() = %d\n", err);
+ return err;
+ }
+
+ mac_dev = priv->mac_dev;
+
+ err = mac_dev->change_addr(mac_dev->fman_mac,
+ (enet_addr_t *)net_dev->dev_addr);
+ if (err < 0) {
+ netif_err(priv, drv, net_dev, "mac_dev->change_addr() = %d\n",
+ err);
+ return err;
+ }
+
+ return 0;
+}
+
+void dpa_set_rx_mode(struct net_device *net_dev)
+{
+ int err;
+ const struct dpa_priv *priv;
+
+ priv = netdev_priv(net_dev);
+
+ if (!!(net_dev->flags & IFF_PROMISC) != priv->mac_dev->promisc) {
+ priv->mac_dev->promisc = !priv->mac_dev->promisc;
+ err = priv->mac_dev->set_promisc(priv->mac_dev->fman_mac,
+ priv->mac_dev->promisc);
+ if (err < 0)
+ netif_err(priv, drv, net_dev,
+ "mac_dev->set_promisc() = %d\n",
+ err);
+ }
+
+ err = priv->mac_dev->set_multi(net_dev, priv->mac_dev);
+ if (err < 0)
+ netif_err(priv, drv, net_dev, "mac_dev->set_multi() = %d\n",
+ err);
+}
+
+void dpa_set_buffers_layout(struct mac_device *mac_dev,
+ struct dpa_buffer_layout *layout)
+{
+ /* Rx */
+ layout[RX].priv_data_size = DPA_RX_PRIV_DATA_SIZE;
+ layout[RX].data_align = DPA_FD_DATA_ALIGNMENT;
+
+ /* Tx */
+ layout[TX].priv_data_size = DPA_TX_PRIV_DATA_SIZE;
+ layout[TX].data_align = DPA_FD_DATA_ALIGNMENT;
+}
+
+int dpa_bp_alloc(struct dpa_bp *dpa_bp)
+{
+ int err;
+ struct bman_pool_params bp_params;
+ struct platform_device *pdev;
+
+ if (dpa_bp->size == 0 || dpa_bp->config_count == 0) {
+ pr_err("%s: Buffer pool is not properly initialized! Missing size or initial number of buffers\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ memset(&bp_params, 0, sizeof(struct bman_pool_params));
+
+ /* If the pool is already specified, we only create one per bpid */
+ if (dpa_bpid2pool_use(dpa_bp->bpid))
+ return 0;
+
+ if (dpa_bp->bpid == 0)
+ bp_params.flags |= BMAN_POOL_FLAG_DYNAMIC_BPID;
+ else
+ bp_params.bpid = dpa_bp->bpid;
+
+ dpa_bp->pool = bman_new_pool(&bp_params);
+ if (!dpa_bp->pool) {
+ pr_err("%s: bman_new_pool() failed\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ dpa_bp->bpid = (u8)bman_get_params(dpa_bp->pool)->bpid;
+
+ pdev = platform_device_register_simple("DPAA_bpool",
+ dpa_bp->bpid, NULL, 0);
+ if (IS_ERR(pdev)) {
+ err = PTR_ERR(pdev);
+ goto pdev_register_failed;
+ }
+
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(40));
+ if (err)
+ goto pdev_mask_failed;
+
+ dpa_bp->dev = &pdev->dev;
+
+ if (dpa_bp->seed_cb) {
+ err = dpa_bp->seed_cb(dpa_bp);
+ if (err)
+ goto pool_seed_failed;
+ }
+
+ dpa_bpid2pool_map(dpa_bp->bpid, dpa_bp);
+
+ return 0;
+
+pool_seed_failed:
+pdev_mask_failed:
+ platform_device_unregister(pdev);
+pdev_register_failed:
+ bman_free_pool(dpa_bp->pool);
+
+ return err;
+}
+
+void dpa_bp_drain(struct dpa_bp *bp)
+{
+ int ret;
+ u8 num = 8;
+
+ do {
+ struct bm_buffer bmb[8];
+ int i;
+
+ ret = bman_acquire(bp->pool, bmb, num, 0);
+ if (ret < 0) {
+ if (num == 8) {
+ /* we have less than 8 buffers left;
+ * drain them one by one
+ */
+ num = 1;
+ ret = 1;
+ continue;
+ } else {
+ /* Pool is fully drained */
+ break;
+ }
+ }
+
+ for (i = 0; i < num; i++) {
+ dma_addr_t addr = bm_buf_addr(&bmb[i]);
+
+ dma_unmap_single(bp->dev, addr, bp->size,
+ DMA_BIDIRECTIONAL);
+
+ bp->free_buf_cb(phys_to_virt(addr));
+ }
+ } while (ret > 0);
+}
+
+static void dpa_bpool_free(struct dpa_bp *dpa_bp)
+{
+ struct dpa_bp *bp = dpa_bpid2pool(dpa_bp->bpid);
+
+ /* the mapping between bpid and dpa_bp is done very late in the
+ * allocation procedure; if something failed before the mapping, the bp
+ * was not configured, therefore we don't need the below instructions
+ */
+ if (!bp)
+ return;
+
+ if (!atomic_dec_and_test(&bp->refs))
+ return;
+
+ if (bp->free_buf_cb)
+ dpa_bp_drain(bp);
+
+ dpa_bp_array[bp->bpid] = NULL;
+ bman_free_pool(bp->pool);
+
+ if (bp->dev)
+ platform_device_unregister(to_platform_device(bp->dev));
+}
+
+void dpa_bp_free(struct dpa_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < priv->bp_count; i++)
+ dpa_bpool_free(&priv->dpa_bp[i]);
+}
+
+struct dpa_bp *dpa_bpid2pool(int bpid)
+{
+ return dpa_bp_array[bpid];
+}
+
+void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp)
+{
+ dpa_bp_array[bpid] = dpa_bp;
+ atomic_set(&dpa_bp->refs, 1);
+}
+
+bool dpa_bpid2pool_use(int bpid)
+{
+ if (dpa_bpid2pool(bpid)) {
+ atomic_inc(&dpa_bp_array[bpid]->refs);
+ return true;
+ }
+
+ return false;
+}
+
+struct dpa_fq *dpa_fq_alloc(struct device *dev,
+ const struct fqid_cell *fqids,
+ struct list_head *list,
+ enum dpa_fq_type fq_type)
+{
+ int i;
+ struct dpa_fq *dpa_fq;
+
+ dpa_fq = devm_kzalloc(dev, sizeof(*dpa_fq) * fqids->count, GFP_KERNEL);
+ if (!dpa_fq)
+ return NULL;
+
+ for (i = 0; i < fqids->count; i++) {
+ dpa_fq[i].fq_type = fq_type;
+ dpa_fq[i].fqid = fqids->start ? fqids->start + i : 0;
+ list_add_tail(&dpa_fq[i].list, list);
+ }
+
+ for (i = 0; i < fqids->count; i++)
+ _dpa_assign_wq(dpa_fq + i);
+
+ return dpa_fq;
+}
+
+int dpa_fq_probe_mac(struct device *dev, struct list_head *list,
+ struct fm_port_fqs *port_fqs,
+ bool alloc_tx_conf_fqs,
+ enum port_type ptype)
+{
+ const struct fqid_cell *fqids;
+ struct dpa_fq *dpa_fq;
+
+ if (ptype == TX && alloc_tx_conf_fqs) {
+ if (!dpa_fq_alloc(dev, tx_confirm_fqids, list,
+ FQ_TYPE_TX_CONF_MQ))
+ goto fq_alloc_failed;
+ }
+
+ fqids = default_fqids[ptype];
+
+ /* The first queue is the error queue */
+ if (fqids[DPAA_ETH_ERROR_FQ_GRP].count != 1)
+ goto invalid_error_queue;
+
+ dpa_fq = dpa_fq_alloc(dev, &fqids[DPAA_ETH_ERROR_FQ_GRP], list,
+ ptype == RX ?
+ FQ_TYPE_RX_ERROR :
+ FQ_TYPE_TX_ERROR);
+ if (!dpa_fq)
+ goto fq_alloc_failed;
+
+ if (ptype == RX)
+ port_fqs->rx_errq = &dpa_fq[0];
+ else
+ port_fqs->tx_errq = &dpa_fq[0];
+
+ /* the second queue is the default queue */
+ if (fqids[DPAA_ETH_DEFLT_FQ_GRP].count != 1)
+ goto invalid_default_queue;
+
+ dpa_fq = dpa_fq_alloc(dev, &fqids[DPAA_ETH_DEFLT_FQ_GRP], list,
+ ptype == RX ?
+ FQ_TYPE_RX_DEFAULT :
+ FQ_TYPE_TX_CONFIRM);
+ if (!dpa_fq)
+ goto fq_alloc_failed;
+
+ if (ptype == RX)
+ port_fqs->rx_defq = &dpa_fq[0];
+ else
+ port_fqs->tx_defq = &dpa_fq[0];
+
+ /* all subsequent queues are Tx */
+ if (!dpa_fq_alloc(dev, &fqids[DPAA_ETH_TXCNF_FQ_GRP],
+ list, FQ_TYPE_TX))
+ goto fq_alloc_failed;
+
+ return 0;
+
+fq_alloc_failed:
+ dev_err(dev, "dpa_fq_alloc() failed\n");
+ return -ENOMEM;
+
+invalid_default_queue:
+invalid_error_queue:
+ dev_err(dev, "Too many default or error queues\n");
+ return -EINVAL;
+}
+
+static u32 rx_pool_channel;
+static DEFINE_SPINLOCK(rx_pool_channel_init);
+
+int dpa_get_channel(void)
+{
+ spin_lock(&rx_pool_channel_init);
+ if (!rx_pool_channel) {
+ u32 pool;
+ int ret = qman_alloc_pool(&pool);
+
+ if (!ret)
+ rx_pool_channel = pool;
+ }
+ spin_unlock(&rx_pool_channel_init);
+ if (!rx_pool_channel)
+ return -ENOMEM;
+ return rx_pool_channel;
+}
+
+void dpa_release_channel(void)
+{
+ qman_release_pool(rx_pool_channel);
+}
+
+int dpaa_eth_add_channel(void *__arg)
+{
+ const cpumask_t *cpus = qman_affine_cpus();
+ u32 pool = QM_SDQCR_CHANNELS_POOL_CONV((u16)(unsigned long)__arg);
+ int cpu;
+ struct qman_portal *portal;
+
+ for_each_cpu(cpu, cpus) {
+ portal = (struct qman_portal *)qman_get_affine_portal(cpu);
+ qman_p_static_dequeue_add(portal, pool);
+ }
+ return 0;
+}
+
+/* Congestion group state change notification callback.
+ * Stops the device's egress queues while they are congested and
+ * wakes them upon exiting congested state.
+ * Also updates some CGR-related stats.
+ */
+static void dpaa_eth_cgscn(struct qman_portal *qm, struct qman_cgr *cgr,
+ int congested)
+{
+ struct dpa_priv *priv = (struct dpa_priv *)container_of(cgr,
+ struct dpa_priv, cgr_data.cgr);
+
+ if (congested)
+ netif_tx_stop_all_queues(priv->net_dev);
+ else
+ netif_tx_wake_all_queues(priv->net_dev);
+}
+
+int dpaa_eth_cgr_init(struct dpa_priv *priv)
+{
+ struct qm_mcc_initcgr initcgr;
+ u32 cs_th;
+ int err;
+
+ err = qman_alloc_cgrid(&priv->cgr_data.cgr.cgrid);
+ if (err < 0) {
+ if (netif_msg_drv(priv))
+ pr_err("%s: Error %d allocating CGR ID\n",
+ __func__, err);
+ goto out_error;
+ }
+ priv->cgr_data.cgr.cb = dpaa_eth_cgscn;
+
+ /* Enable Congestion State Change Notifications and CS taildrop */
+ initcgr.we_mask = QM_CGR_WE_CSCN_EN | QM_CGR_WE_CS_THRES;
+ initcgr.cgr.cscn_en = QM_CGR_EN;
+
+ /* Set different thresholds based on the MAC speed.
+ * This may turn suboptimal if the MAC is reconfigured at a speed
+ * lower than its max, e.g. if a dTSEC later negotiates a 100Mbps link.
+ * In such cases, we ought to reconfigure the threshold, too.
+ */
+ if (priv->mac_dev->if_support & SUPPORTED_10000baseT_Full)
+ cs_th = DPAA_CS_THRESHOLD_10G;
+ else
+ cs_th = DPAA_CS_THRESHOLD_1G;
+ qm_cgr_cs_thres_set64(&initcgr.cgr.cs_thres, cs_th, 1);
+
+ initcgr.we_mask |= QM_CGR_WE_CSTD_EN;
+ initcgr.cgr.cstd_en = QM_CGR_EN;
+
+ err = qman_create_cgr(&priv->cgr_data.cgr, QMAN_CGR_FLAG_USE_INIT,
+ &initcgr);
+ if (err < 0) {
+ if (netif_msg_drv(priv))
+ pr_err("%s: Error %d creating CGR with ID %d\n",
+ __func__, err, priv->cgr_data.cgr.cgrid);
+ qman_release_cgrid(priv->cgr_data.cgr.cgrid);
+ goto out_error;
+ }
+ if (netif_msg_drv(priv))
+ pr_debug("Created CGR %d for netdev with hwaddr %pM on QMan channel %d\n",
+ priv->cgr_data.cgr.cgrid, priv->mac_dev->addr,
+ priv->cgr_data.cgr.chan);
+
+out_error:
+ return err;
+}
+
+static inline void dpa_setup_ingress(const struct dpa_priv *priv,
+ struct dpa_fq *fq,
+ const struct qman_fq *template)
+{
+ fq->fq_base = *template;
+ fq->net_dev = priv->net_dev;
+
+ fq->flags = QMAN_FQ_FLAG_NO_ENQUEUE;
+ fq->channel = priv->channel;
+}
+
+static inline void dpa_setup_egress(const struct dpa_priv *priv,
+ struct dpa_fq *fq,
+ struct fman_port *port,
+ const struct qman_fq *template)
+{
+ fq->fq_base = *template;
+ fq->net_dev = priv->net_dev;
+
+ if (port) {
+ fq->flags = QMAN_FQ_FLAG_TO_DCPORTAL;
+ fq->channel = (u16)fman_port_get_qman_channel_id(port);
+ } else {
+ fq->flags = QMAN_FQ_FLAG_NO_MODIFY;
+ }
+}
+
+void dpa_fq_setup(struct dpa_priv *priv, const struct dpa_fq_cbs *fq_cbs,
+ struct fman_port *tx_port)
+{
+ struct dpa_fq *fq;
+ u16 portals[NR_CPUS];
+ int cpu, num_portals = 0;
+ const cpumask_t *affine_cpus = qman_affine_cpus();
+ int egress_cnt = 0, conf_cnt = 0;
+
+ for_each_cpu(cpu, affine_cpus)
+ portals[num_portals++] = qman_affine_channel(cpu);
+ if (num_portals == 0)
+ dev_err(priv->net_dev->dev.parent,
+ "No Qman software (affine) channels found");
+
+ /* Initialize each FQ in the list */
+ list_for_each_entry(fq, &priv->dpa_fq_list, list) {
+ switch (fq->fq_type) {
+ case FQ_TYPE_RX_DEFAULT:
+ WARN_ON(!priv->mac_dev);
+ dpa_setup_ingress(priv, fq, &fq_cbs->rx_defq);
+ break;
+ case FQ_TYPE_RX_ERROR:
+ WARN_ON(!priv->mac_dev);
+ dpa_setup_ingress(priv, fq, &fq_cbs->rx_errq);
+ break;
+ case FQ_TYPE_TX:
+ dpa_setup_egress(priv, fq, tx_port,
+ &fq_cbs->egress_ern);
+ /* If we have more Tx queues than the number of cores,
+ * just ignore the extra ones.
+ */
+ if (egress_cnt < DPAA_ETH_TX_QUEUES)
+ priv->egress_fqs[egress_cnt++] = &fq->fq_base;
+ break;
+ case FQ_TYPE_TX_CONFIRM:
+ WARN_ON(!priv->mac_dev);
+ dpa_setup_ingress(priv, fq, &fq_cbs->tx_defq);
+ break;
+ case FQ_TYPE_TX_CONF_MQ:
+ WARN_ON(!priv->mac_dev);
+ dpa_setup_ingress(priv, fq, &fq_cbs->tx_defq);
+ priv->conf_fqs[conf_cnt++] = &fq->fq_base;
+ break;
+ case FQ_TYPE_TX_ERROR:
+ WARN_ON(!priv->mac_dev);
+ dpa_setup_ingress(priv, fq, &fq_cbs->tx_errq);
+ break;
+ default:
+ dev_warn(priv->net_dev->dev.parent,
+ "Unknown FQ type detected!\n");
+ break;
+ }
+ }
+
+ /* The number of Tx queues may be smaller than the number of cores, if
+ * the Tx queue range is specified in the device tree instead of being
+ * dynamically allocated.
+ * Make sure all CPUs receive a corresponding Tx queue.
+ */
+ while (egress_cnt < DPAA_ETH_TX_QUEUES) {
+ list_for_each_entry(fq, &priv->dpa_fq_list, list) {
+ if (fq->fq_type != FQ_TYPE_TX)
+ continue;
+ priv->egress_fqs[egress_cnt++] = &fq->fq_base;
+ if (egress_cnt == DPAA_ETH_TX_QUEUES)
+ break;
+ }
+ }
+}
+
+int dpa_fq_init(struct dpa_fq *dpa_fq, bool td_enable)
+{
+ int err;
+ const struct dpa_priv *priv;
+ struct device *dev;
+ struct qman_fq *fq;
+ struct qm_mcc_initfq initfq;
+ struct qman_fq *confq = NULL;
+ int queue_id;
+
+ priv = netdev_priv(dpa_fq->net_dev);
+ dev = dpa_fq->net_dev->dev.parent;
+
+ if (dpa_fq->fqid == 0)
+ dpa_fq->flags |= QMAN_FQ_FLAG_DYNAMIC_FQID;
+
+ dpa_fq->init = !(dpa_fq->flags & QMAN_FQ_FLAG_NO_MODIFY);
+
+ err = qman_create_fq(dpa_fq->fqid, dpa_fq->flags, &dpa_fq->fq_base);
+ if (err) {
+ dev_err(dev, "qman_create_fq() failed\n");
+ return err;
+ }
+ fq = &dpa_fq->fq_base;
+
+ if (dpa_fq->init) {
+ memset(&initfq, 0, sizeof(initfq));
+
+ initfq.we_mask = QM_INITFQ_WE_FQCTRL;
+ /* Note: we may get to keep an empty FQ in cache */
+ initfq.fqd.fq_ctrl = QM_FQCTRL_PREFERINCACHE;
+
+ /* Try to reduce the number of portal interrupts for
+ * Tx Confirmation FQs.
+ */
+ if (dpa_fq->fq_type == FQ_TYPE_TX_CONFIRM)
+ initfq.fqd.fq_ctrl |= QM_FQCTRL_HOLDACTIVE;
+
+ /* FQ placement */
+ initfq.we_mask |= QM_INITFQ_WE_DESTWQ;
+
+ initfq.fqd.dest.channel = dpa_fq->channel;
+ initfq.fqd.dest.wq = dpa_fq->wq;
+
+ /* Put all egress queues in a congestion group of their own.
+ * Sensu stricto, the Tx confirmation queues are Rx FQs,
+ * rather than Tx - but they nonetheless account for the
+ * memory footprint on behalf of egress traffic. We therefore
+ * place them in the netdev's CGR, along with the Tx FQs.
+ */
+ if (dpa_fq->fq_type == FQ_TYPE_TX ||
+ dpa_fq->fq_type == FQ_TYPE_TX_CONFIRM ||
+ dpa_fq->fq_type == FQ_TYPE_TX_CONF_MQ) {
+ initfq.we_mask |= QM_INITFQ_WE_CGID;
+ initfq.fqd.fq_ctrl |= QM_FQCTRL_CGE;
+ initfq.fqd.cgid = (u8)priv->cgr_data.cgr.cgrid;
+ /* Set a fixed overhead accounting, in an attempt to
+ * reduce the impact of fixed-size skb shells and the
+ * driver's needed headroom on system memory. This is
+ * especially the case when the egress traffic is
+ * composed of small datagrams.
+ * Unfortunately, QMan's OAL value is capped to an
+ * insufficient value, but even that is better than
+ * no overhead accounting at all.
+ */
+ initfq.we_mask |= QM_INITFQ_WE_OAC;
+ initfq.fqd.oac_init.oac = QM_OAC_CG;
+ initfq.fqd.oac_init.oal =
+ (signed char)(min(sizeof(struct sk_buff) +
+ priv->tx_headroom,
+ (size_t)FSL_QMAN_MAX_OAL));
+ }
+
+ if (td_enable) {
+ initfq.we_mask |= QM_INITFQ_WE_TDTHRESH;
+ qm_fqd_taildrop_set(&initfq.fqd.td,
+ DPA_FQ_TD, 1);
+ initfq.fqd.fq_ctrl = QM_FQCTRL_TDE;
+ }
+
+ /* Configure the Tx confirmation queue, now that we know
+ * which Tx queue it pairs with.
+ */
+ if (dpa_fq->fq_type == FQ_TYPE_TX) {
+ queue_id = dpa_tx_fq_to_id(priv, &dpa_fq->fq_base);
+ if (queue_id >= 0)
+ confq = priv->conf_fqs[queue_id];
+ if (confq) {
+ initfq.we_mask |= QM_INITFQ_WE_CONTEXTA;
+ /* ContextA: OVOM=1(use contextA2 bits instead of ICAD)
+ * A2V=1 (contextA A2 field is valid)
+ * A0V=1 (contextA A0 field is valid)
+ * B0V=1 (contextB field is valid)
+ * ContextA A2: EBD=1 (deallocate buffers inside FMan)
+ * ContextB B0(ASPID): 0 (absolute Virtual Storage ID)
+ */
+ initfq.fqd.context_a.hi = 0x1e000000;
+ initfq.fqd.context_a.lo = 0x80000000;
+ }
+ }
+
+ /* Put all the ingress queues in our "ingress CGR". */
+ if (priv->use_ingress_cgr &&
+ (dpa_fq->fq_type == FQ_TYPE_RX_DEFAULT ||
+ dpa_fq->fq_type == FQ_TYPE_RX_ERROR)) {
+ initfq.we_mask |= QM_INITFQ_WE_CGID;
+ initfq.fqd.fq_ctrl |= QM_FQCTRL_CGE;
+ initfq.fqd.cgid = (u8)priv->ingress_cgr.cgrid;
+ /* Set a fixed overhead accounting, just like for the
+ * egress CGR.
+ */
+ initfq.we_mask |= QM_INITFQ_WE_OAC;
+ initfq.fqd.oac_init.oac = QM_OAC_CG;
+ initfq.fqd.oac_init.oal =
+ (signed char)(min(sizeof(struct sk_buff) +
+ priv->tx_headroom, (size_t)FSL_QMAN_MAX_OAL));
+ }
+
+ /* Initialization common to all ingress queues */
+ if (dpa_fq->flags & QMAN_FQ_FLAG_NO_ENQUEUE) {
+ initfq.we_mask |= QM_INITFQ_WE_CONTEXTA;
+ initfq.fqd.fq_ctrl |=
+ QM_FQCTRL_CTXASTASHING | QM_FQCTRL_AVOIDBLOCK;
+ initfq.fqd.context_a.stashing.exclusive =
+ QM_STASHING_EXCL_DATA | QM_STASHING_EXCL_CTX |
+ QM_STASHING_EXCL_ANNOTATION;
+ initfq.fqd.context_a.stashing.data_cl = 2;
+ initfq.fqd.context_a.stashing.annotation_cl = 1;
+ initfq.fqd.context_a.stashing.context_cl =
+ DIV_ROUND_UP(sizeof(struct qman_fq), 64);
+ }
+
+ err = qman_init_fq(fq, QMAN_INITFQ_FLAG_SCHED, &initfq);
+ if (err < 0) {
+ dev_err(dev, "qman_init_fq(%u) = %d\n",
+ qman_fq_fqid(fq), err);
+ qman_destroy_fq(fq, 0);
+ return err;
+ }
+ }
+
+ dpa_fq->fqid = qman_fq_fqid(fq);
+
+ return 0;
+}
+
+static int dpa_fq_free_entry(struct device *dev, struct qman_fq *fq)
+{
+ int err, error;
+ struct dpa_fq *dpa_fq;
+ const struct dpa_priv *priv;
+
+ err = 0;
+
+ dpa_fq = container_of(fq, struct dpa_fq, fq_base);
+ priv = netdev_priv(dpa_fq->net_dev);
+
+ if (dpa_fq->init) {
+ err = qman_retire_fq(fq, NULL);
+ if (err < 0 && netif_msg_drv(priv))
+ dev_err(dev, "qman_retire_fq(%u) = %d\n",
+ qman_fq_fqid(fq), err);
+
+ error = qman_oos_fq(fq);
+ if (error < 0 && netif_msg_drv(priv)) {
+ dev_err(dev, "qman_oos_fq(%u) = %d\n",
+ qman_fq_fqid(fq), error);
+ if (err >= 0)
+ err = error;
+ }
+ }
+
+ qman_destroy_fq(fq, 0);
+ list_del(&dpa_fq->list);
+
+ return err;
+}
+
+int dpa_fq_free(struct device *dev, struct list_head *list)
+{
+ int err, error;
+ struct dpa_fq *dpa_fq, *tmp;
+
+ err = 0;
+ list_for_each_entry_safe(dpa_fq, tmp, list, list) {
+ error = dpa_fq_free_entry(dev, (struct qman_fq *)dpa_fq);
+ if (error < 0 && err >= 0)
+ err = error;
+ }
+
+ return err;
+}
+
+static void dpaa_eth_init_tx_port(struct fman_port *port, struct dpa_fq *errq,
+ struct dpa_fq *defq,
+ struct dpa_buffer_layout *buf_layout)
+{
+ struct fman_port_params params;
+ struct fman_buffer_prefix_content buf_prefix_content;
+ int err;
+
+ memset(¶ms, 0, sizeof(params));
+ memset(&buf_prefix_content, 0, sizeof(buf_prefix_content));
+
+ buf_prefix_content.priv_data_size = buf_layout->priv_data_size;
+ buf_prefix_content.pass_prs_result = true;
+ buf_prefix_content.pass_hash_result = true;
+ buf_prefix_content.pass_time_stamp = false;
+ buf_prefix_content.data_align = buf_layout->data_align;
+
+ params.specific_params.non_rx_params.err_fqid = errq->fqid;
+ params.specific_params.non_rx_params.dflt_fqid = defq->fqid;
+
+ err = fman_port_config(port, ¶ms);
+ if (err)
+ pr_err("%s: fman_port_config failed\n", __func__);
+
+ err = fman_port_cfg_buf_prefix_content(port, &buf_prefix_content);
+ if (err)
+ pr_err("%s: fman_port_cfg_buf_prefix_content failed\n",
+ __func__);
+
+ err = fman_port_init(port);
+ if (err)
+ pr_err("%s: fm_port_init failed\n", __func__);
+}
+
+static void dpaa_eth_init_rx_port(struct fman_port *port, struct dpa_bp *bp,
+ size_t count, struct dpa_fq *errq,
+ struct dpa_fq *defq,
+ struct dpa_buffer_layout *buf_layout)
+{
+ struct fman_port_params params;
+ struct fman_buffer_prefix_content buf_prefix_content;
+ struct fman_port_rx_params *rx_p;
+ int i, err;
+
+ memset(¶ms, 0, sizeof(params));
+ memset(&buf_prefix_content, 0, sizeof(buf_prefix_content));
+
+ buf_prefix_content.priv_data_size = buf_layout->priv_data_size;
+ buf_prefix_content.pass_prs_result = true;
+ buf_prefix_content.pass_hash_result = true;
+ buf_prefix_content.pass_time_stamp = false;
+ buf_prefix_content.data_align = buf_layout->data_align;
+
+ rx_p = ¶ms.specific_params.rx_params;
+ rx_p->err_fqid = errq->fqid;
+ rx_p->dflt_fqid = defq->fqid;
+
+ count = min(ARRAY_SIZE(rx_p->ext_buf_pools.ext_buf_pool), count);
+ rx_p->ext_buf_pools.num_of_pools_used = (u8)count;
+ for (i = 0; i < count; i++) {
+ rx_p->ext_buf_pools.ext_buf_pool[i].id = bp[i].bpid;
+ rx_p->ext_buf_pools.ext_buf_pool[i].size = (u16)bp[i].size;
+ }
+
+ err = fman_port_config(port, ¶ms);
+ if (err)
+ pr_err("%s: fman_port_config failed\n", __func__);
+
+ err = fman_port_cfg_buf_prefix_content(port, &buf_prefix_content);
+ if (err)
+ pr_err("%s: fman_port_cfg_buf_prefix_content failed\n",
+ __func__);
+
+ err = fman_port_init(port);
+ if (err)
+ pr_err("%s: fm_port_init failed\n", __func__);
+}
+
+void dpaa_eth_init_ports(struct mac_device *mac_dev,
+ struct dpa_bp *bp, size_t count,
+ struct fm_port_fqs *port_fqs,
+ struct dpa_buffer_layout *buf_layout,
+ struct device *dev)
+{
+ struct fman_port *rxport = mac_dev->port[RX];
+ struct fman_port *txport = mac_dev->port[TX];
+
+ dpaa_eth_init_tx_port(txport, port_fqs->tx_errq,
+ port_fqs->tx_defq, &buf_layout[TX]);
+ dpaa_eth_init_rx_port(rxport, bp, count, port_fqs->rx_errq,
+ port_fqs->rx_defq, &buf_layout[RX]);
+}
+
+void dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd)
+{
+ struct dpa_bp *dpa_bp;
+ struct bm_buffer bmb;
+ int timeout = 100;
+
+ memset(&bmb, 0, sizeof(bmb));
+ bm_buffer_set64(&bmb, fd->addr);
+
+ dpa_bp = dpa_bpid2pool(fd->bpid);
+ WARN_ON(!dpa_bp);
+
+ WARN_ON(fd->format == qm_fd_sg);
+
+ while (bman_release(dpa_bp->pool, &bmb, 1, 0) && --timeout)
+ cpu_relax();
+}
+
+/* Turn on HW checksum computation for this outgoing frame.
+ * If the current protocol is not something we support in this regard
+ * (or if the stack has already computed the SW checksum), we do nothing.
+ *
+ * Returns 0 if all goes well (or HW csum doesn't apply), and a negative value
+ * otherwise.
+ *
+ * Note that this function may modify the fd->cmd field and the skb data buffer
+ * (the Parse Results area).
+ */
+int dpa_enable_tx_csum(struct dpa_priv *priv,
+ struct sk_buff *skb,
+ struct qm_fd *fd,
+ char *parse_results)
+{
+ struct fman_prs_result *parse_result;
+ struct iphdr *iph;
+ struct ipv6hdr *ipv6h = NULL;
+ u8 l4_proto;
+ u16 ethertype = ntohs(skb->protocol);
+ int retval = 0;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ return 0;
+
+ /* Note: L3 csum seems to be already computed in sw, but we can't choose
+ * L4 alone from the FM configuration anyway.
+ */
+
+ /* Fill in some fields of the Parse Results array, so the FMan
+ * can find them as if they came from the FMan Parser.
+ */
+ parse_result = (struct fman_prs_result *)parse_results;
+
+ /* If we're dealing with VLAN, get the real Ethernet type */
+ if (ethertype == ETH_P_8021Q) {
+ /* We can't always assume the MAC header is set correctly
+ * by the stack, so reset to beginning of skb->data
+ */
+ skb_reset_mac_header(skb);
+ ethertype = ntohs(vlan_eth_hdr(skb)->h_vlan_encapsulated_proto);
+ }
+
+ /* Fill in the relevant L3 parse result fields
+ * and read the L4 protocol type
+ */
+ switch (ethertype) {
+ case ETH_P_IP:
+ parse_result->l3r = cpu_to_be16(FM_L3_PARSE_RESULT_IPV4);
+ iph = ip_hdr(skb);
+ WARN_ON(!iph);
+ l4_proto = iph->protocol;
+ break;
+ case ETH_P_IPV6:
+ parse_result->l3r = cpu_to_be16(FM_L3_PARSE_RESULT_IPV6);
+ ipv6h = ipv6_hdr(skb);
+ WARN_ON(!ipv6h);
+ l4_proto = ipv6h->nexthdr;
+ break;
+ default:
+ /* We shouldn't even be here */
+ if (net_ratelimit())
+ netif_alert(priv, tx_err, priv->net_dev,
+ "Can't compute HW csum for L3 proto 0x%x\n",
+ ntohs(skb->protocol));
+ retval = -EIO;
+ goto return_error;
+ }
+
+ /* Fill in the relevant L4 parse result fields */
+ switch (l4_proto) {
+ case IPPROTO_UDP:
+ parse_result->l4r = FM_L4_PARSE_RESULT_UDP;
+ break;
+ case IPPROTO_TCP:
+ parse_result->l4r = FM_L4_PARSE_RESULT_TCP;
+ break;
+ default:
+ if (net_ratelimit())
+ netif_alert(priv, tx_err, priv->net_dev,
+ "Can't compute HW csum for L4 proto 0x%x\n",
+ l4_proto);
+ retval = -EIO;
+ goto return_error;
+ }
+
+ /* At index 0 is IPOffset_1 as defined in the Parse Results */
+ parse_result->ip_off[0] = (u8)skb_network_offset(skb);
+ parse_result->l4_off = (u8)skb_transport_offset(skb);
+
+ /* Enable L3 (and L4, if TCP or UDP) HW checksum. */
+ fd->cmd |= FM_FD_CMD_RPD | FM_FD_CMD_DTC;
+
+ /* On P1023 and similar platforms fd->cmd interpretation could
+ * be disabled by setting CONTEXT_A bit ICMD; currently this bit
+ * is not set so we do not need to check; in the future, if/when
+ * using context_a we need to check this bit
+ */
+
+return_error:
+ return retval;
+}
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
new file mode 100644
index 0000000..78a97d9
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
@@ -0,0 +1,97 @@
+/* Copyright 2008 - 2015 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DPAA_ETH_COMMON_H
+#define __DPAA_ETH_COMMON_H
+
+#include <linux/etherdevice.h>
+#include <soc/fsl/bman.h>
+#include <linux/of_platform.h>
+
+#include "dpaa_eth.h"
+
+#define DPA_BUFF_RELEASE_MAX 8 /* maximum number of buffers released at once */
+
+/* used in napi related functions */
+extern u16 qman_portal_max;
+
+int dpa_netdev_init(struct net_device *net_dev,
+ const struct net_device_ops *dpaa_ops, u16 tx_timeout);
+int dpa_start(struct net_device *net_dev);
+int dpa_stop(struct net_device *net_dev);
+void dpa_timeout(struct net_device *net_dev);
+struct rtnl_link_stats64 *dpa_get_stats64(struct net_device *net_dev,
+ struct rtnl_link_stats64 *stats);
+int dpa_change_mtu(struct net_device *net_dev, int new_mtu);
+int dpa_ndo_init(struct net_device *net_dev);
+int dpa_set_features(struct net_device *dev, netdev_features_t features);
+netdev_features_t dpa_fix_features(struct net_device *dev,
+ netdev_features_t features);
+int dpa_remove(struct platform_device *pdev);
+struct mac_device *dpa_mac_dev_get(struct platform_device *pdev);
+int dpa_mac_hw_index_get(struct platform_device *pdev);
+int dpa_mac_fman_index_get(struct platform_device *pdev);
+int dpa_set_mac_address(struct net_device *net_dev, void *addr);
+void dpa_set_rx_mode(struct net_device *net_dev);
+void dpa_set_buffers_layout(struct mac_device *mac_dev,
+ struct dpa_buffer_layout *layout);
+int dpa_bp_alloc(struct dpa_bp *dpa_bp);
+void dpa_bp_free(struct dpa_priv *priv);
+struct dpa_bp *dpa_bpid2pool(int bpid);
+void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp);
+bool dpa_bpid2pool_use(int bpid);
+void dpa_bp_drain(struct dpa_bp *bp);
+struct dpa_fq *dpa_fq_alloc(struct device *dev,
+ const struct fqid_cell *fqids,
+ struct list_head *list,
+ enum dpa_fq_type fq_type);
+int dpa_fq_probe_mac(struct device *dev, struct list_head *list,
+ struct fm_port_fqs *port_fqs,
+ bool tx_conf_fqs_per_core,
+ enum port_type ptype);
+int dpa_get_channel(void);
+void dpa_release_channel(void);
+int dpaa_eth_add_channel(void *__arg);
+int dpaa_eth_cgr_init(struct dpa_priv *priv);
+void dpa_fq_setup(struct dpa_priv *priv, const struct dpa_fq_cbs *fq_cbs,
+ struct fman_port *tx_port);
+int dpa_fq_init(struct dpa_fq *dpa_fq, bool td_enable);
+int dpa_fq_free(struct device *dev, struct list_head *list);
+void dpaa_eth_init_ports(struct mac_device *mac_dev,
+ struct dpa_bp *bp, size_t count,
+ struct fm_port_fqs *port_fqs,
+ struct dpa_buffer_layout *buf_layout,
+ struct device *dev);
+void dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd);
+int dpa_enable_tx_csum(struct dpa_priv *priv,
+ struct sk_buff *skb,
+ struct qm_fd *fd,
+ char *parse_results);
+#endif /* __DPAA_ETH_COMMON_H */
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
new file mode 100644
index 0000000..c913dd6
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
@@ -0,0 +1,386 @@
+/* Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/highmem.h>
+#include <soc/fsl/bman.h>
+
+#include "dpaa_eth.h"
+#include "dpaa_eth_common.h"
+
+static int dpa_bp_add_8_bufs(const struct dpa_bp *dpa_bp)
+{
+ struct bm_buffer bmb[8];
+ void *new_buf;
+ dma_addr_t addr;
+ u8 i;
+ struct device *dev = dpa_bp->dev;
+ struct sk_buff *skb, **skbh;
+ int timeout = 100;
+
+ memset(bmb, 0, sizeof(bmb));
+
+ for (i = 0; i < 8; i++) {
+ /* We'll prepend the skb back-pointer; can't use the DPA
+ * priv space, because FMan will overwrite it (from offset 0)
+ * if it ends up being the second, third, etc. fragment
+ * in a S/G frame.
+ *
+ * We only need enough space to store a pointer, but allocate
+ * an entire cacheline for performance reasons.
+ */
+ new_buf = netdev_alloc_frag(SMP_CACHE_BYTES + DPA_BP_RAW_SIZE);
+ if (unlikely(!new_buf))
+ goto netdev_alloc_failed;
+ new_buf = PTR_ALIGN(new_buf + SMP_CACHE_BYTES, SMP_CACHE_BYTES);
+
+ skb = build_skb(new_buf, DPA_SKB_SIZE(dpa_bp->size) +
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
+ if (unlikely(!skb)) {
+ put_page(virt_to_head_page(new_buf));
+ goto build_skb_failed;
+ }
+ skbh = (struct sk_buff **)new_buf;
+ *(skbh - 1) = skb;
+
+ addr = dma_map_single(dev, new_buf,
+ dpa_bp->size, DMA_BIDIRECTIONAL);
+ if (unlikely(dma_mapping_error(dev, addr)))
+ goto dma_map_failed;
+
+ bm_buffer_set64(&bmb[i], addr);
+ }
+
+release_bufs:
+ /* Release the buffers. In case bman is busy, keep trying
+ * until successful. bman_release() is guaranteed to succeed
+ * in a reasonable amount of time
+ */
+ while (unlikely(bman_release(dpa_bp->pool, bmb, i, 0)) && --timeout)
+ cpu_relax();
+ return i;
+
+dma_map_failed:
+ kfree_skb(skb);
+
+build_skb_failed:
+netdev_alloc_failed:
+ net_err_ratelimited("dpa_bp_add_8_bufs() failed\n");
+ WARN_ONCE(1, "Memory allocation failure on Rx\n");
+
+ bm_buffer_set64(&bmb[i], 0);
+ /* Avoid releasing a completely null buffer; bman_release() requires
+ * at least one buffer.
+ */
+ if (likely(i))
+ goto release_bufs;
+
+ return 0;
+}
+
+int dpa_bp_seed(struct dpa_bp *dpa_bp)
+{
+ int i;
+
+ /* Give each CPU an allotment of "config_count" buffers */
+ for_each_possible_cpu(i) {
+ int *count_ptr = per_cpu_ptr(dpa_bp->percpu_count, i);
+ int j;
+
+ /* Although we access another CPU's counters here
+ * we do it at boot time so it is safe
+ */
+ for (j = 0; j < dpa_bp->config_count; j += 8)
+ *count_ptr += dpa_bp_add_8_bufs(dpa_bp);
+ }
+ return 0;
+}
+
+/* Add buffers/(pages) for Rx processing whenever bpool count falls below
+ * REFILL_THRESHOLD.
+ */
+int dpaa_eth_refill_bpools(struct dpa_bp *dpa_bp, int *countptr)
+{
+ int count = *countptr;
+ int new_bufs;
+
+ if (unlikely(count < FSL_DPAA_ETH_REFILL_THRESHOLD)) {
+ do {
+ new_bufs = dpa_bp_add_8_bufs(dpa_bp);
+ if (unlikely(!new_bufs)) {
+ /* Avoid looping forever if we've temporarily
+ * run out of memory. We'll try again at the
+ * next NAPI cycle.
+ */
+ break;
+ }
+ count += new_bufs;
+ } while (count < FSL_DPAA_ETH_MAX_BUF_COUNT);
+
+ *countptr = count;
+ if (unlikely(count < FSL_DPAA_ETH_MAX_BUF_COUNT))
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/* Cleanup function for outgoing frame descriptors that were built on Tx path,
+ * either contiguous frames or scatter/gather ones.
+ * Skb freeing is not handled here.
+ *
+ * This function may be called on error paths in the Tx function, so guard
+ * against cases when not all fd relevant fields were filled in.
+ *
+ * Return the skb backpointer, since for S/G frames the buffer containing it
+ * gets freed here.
+ */
+struct sk_buff *dpa_cleanup_tx_fd(const struct dpa_priv *priv,
+ const struct qm_fd *fd)
+{
+ struct dpa_bp *dpa_bp = priv->dpa_bp;
+ dma_addr_t addr = qm_fd_addr(fd);
+ struct sk_buff **skbh = (struct sk_buff **)phys_to_virt(addr);
+ struct sk_buff *skb = *skbh;
+ const enum dma_data_direction dma_dir = DMA_TO_DEVICE;
+
+ dma_unmap_single(dpa_bp->dev, addr,
+ skb_tail_pointer(skb) - (u8 *)skbh, dma_dir);
+ return skb;
+}
+
+/* Build a linear skb around the received buffer.
+ * We are guaranteed there is enough room at the end of the data buffer to
+ * accommodate the shared info area of the skb.
+ */
+static struct sk_buff *contig_fd_to_skb(const struct dpa_priv *priv,
+ const struct qm_fd *fd)
+{
+ struct sk_buff *skb = NULL, **skbh;
+ ssize_t fd_off = dpa_fd_offset(fd);
+ dma_addr_t addr = qm_fd_addr(fd);
+ void *vaddr;
+
+ vaddr = phys_to_virt(addr);
+ WARN_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES));
+
+ /* Retrieve the skb and adjust data and tail pointers, to make sure
+ * forwarded skbs will have enough space on Tx if extra headers
+ * are added.
+ */
+ skbh = (struct sk_buff **)vaddr;
+ skb = *(skbh - 1);
+
+ WARN_ON(fd_off != priv->rx_headroom);
+ skb_reserve(skb, fd_off);
+ skb_put(skb, dpa_fd_length(fd));
+
+ skb->ip_summed = CHECKSUM_NONE;
+
+ return skb;
+}
+
+void dpa_rx(struct net_device *net_dev,
+ struct qman_portal *portal,
+ const struct dpa_priv *priv,
+ struct dpa_percpu_priv *percpu_priv,
+ const struct qm_fd *fd,
+ u32 fqid,
+ int *count_ptr)
+{
+ struct dpa_bp *dpa_bp;
+ struct sk_buff *skb;
+ dma_addr_t addr = qm_fd_addr(fd);
+ u32 fd_status = fd->status;
+ unsigned int skb_len;
+ struct rtnl_link_stats64 *percpu_stats = &percpu_priv->stats;
+
+ if (unlikely(fd_status & FM_FD_STAT_RX_ERRORS) != 0) {
+ if (net_ratelimit())
+ netif_warn(priv, hw, net_dev, "FD status = 0x%08x\n",
+ fd_status & FM_FD_STAT_RX_ERRORS);
+
+ percpu_stats->rx_errors++;
+ goto release_frame;
+ }
+
+ dpa_bp = priv->dpa_bp;
+ WARN_ON(dpa_bp != dpa_bpid2pool(fd->bpid));
+
+ /* prefetch the first 64 bytes of the frame */
+ dma_unmap_single(dpa_bp->dev, addr, dpa_bp->size, DMA_BIDIRECTIONAL);
+ prefetch(phys_to_virt(addr) + dpa_fd_offset(fd));
+
+ /* The only FD type that we may receive is contig */
+ WARN_ON(fd->format != qm_fd_contig);
+
+ skb = contig_fd_to_skb(priv, fd);
+
+ /* Account for the contig buffer
+ * having been removed from the pool.
+ */
+ (*count_ptr)--;
+ skb->protocol = eth_type_trans(skb, net_dev);
+
+ /* IP Reassembled frames are allowed to be larger than MTU */
+ if (unlikely(dpa_check_rx_mtu(skb, net_dev->mtu) &&
+ !(fd_status & FM_FD_IPR))) {
+ percpu_stats->rx_dropped++;
+ goto drop_bad_frame;
+ }
+
+ skb_len = skb->len;
+
+ if (unlikely(netif_receive_skb(skb) == NET_RX_DROP))
+ goto packet_dropped;
+
+ percpu_stats->rx_packets++;
+ percpu_stats->rx_bytes += skb_len;
+
+packet_dropped:
+ return;
+
+drop_bad_frame:
+ dev_kfree_skb(skb);
+ return;
+
+release_frame:
+ dpa_fd_release(net_dev, fd);
+}
+
+static int skb_to_contig_fd(struct dpa_priv *priv,
+ struct sk_buff *skb, struct qm_fd *fd,
+ int *count_ptr, int *offset)
+{
+ struct sk_buff **skbh;
+ dma_addr_t addr;
+ struct dpa_bp *dpa_bp = priv->dpa_bp;
+ struct net_device *net_dev = priv->net_dev;
+ int err;
+ enum dma_data_direction dma_dir;
+ unsigned char *buffer_start;
+
+ /* We are guaranteed to have at least tx_headroom bytes
+ * available, so just use that for offset.
+ */
+ fd->bpid = FSL_DPAA_BPID_INV;
+ buffer_start = skb->data - priv->tx_headroom;
+ fd->offset = priv->tx_headroom;
+ dma_dir = DMA_TO_DEVICE;
+
+ skbh = (struct sk_buff **)buffer_start;
+ *skbh = skb;
+
+ /* Enable L3/L4 hardware checksum computation.
+ *
+ * We must do this before dma_map_single(DMA_TO_DEVICE), because we may
+ * need to write into the skb.
+ */
+ err = dpa_enable_tx_csum(priv, skb, fd,
+ ((char *)skbh) + DPA_TX_PRIV_DATA_SIZE);
+ if (unlikely(err < 0)) {
+ if (net_ratelimit())
+ netif_err(priv, tx_err, net_dev, "HW csum error: %d\n",
+ err);
+ return err;
+ }
+
+ /* Fill in the rest of the FD fields */
+ fd->format = qm_fd_contig;
+ fd->length20 = skb->len;
+ fd->cmd |= FM_FD_CMD_FCO;
+
+ /* Map the entire buffer size that may be seen by FMan, but no more */
+ addr = dma_map_single(dpa_bp->dev, skbh,
+ skb_tail_pointer(skb) - buffer_start, dma_dir);
+ if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
+ if (net_ratelimit())
+ netif_err(priv, tx_err, net_dev, "dma_map_single() failed\n");
+ return -EINVAL;
+ }
+ fd->addr_hi = (u8)upper_32_bits(addr);
+ fd->addr_lo = lower_32_bits(addr);
+
+ return 0;
+}
+
+int dpa_tx(struct sk_buff *skb, struct net_device *net_dev)
+{
+ struct dpa_priv *priv;
+ struct qm_fd fd;
+ struct dpa_percpu_priv *percpu_priv;
+ struct rtnl_link_stats64 *percpu_stats;
+ int err = 0;
+ const int queue_mapping = dpa_get_queue_mapping(skb);
+ int *countptr, offset = 0;
+
+ priv = netdev_priv(net_dev);
+ percpu_priv = this_cpu_ptr(priv->percpu_priv);
+ percpu_stats = &percpu_priv->stats;
+ countptr = this_cpu_ptr(priv->dpa_bp->percpu_count);
+
+ clear_fd(&fd);
+
+ /* We're going to store the skb backpointer at the beginning
+ * of the data buffer, so we need a privately owned skb
+ *
+ * We've made sure skb is not shared in dev->priv_flags,
+ * we need to verify the skb head is not cloned
+ */
+ if (skb_cow_head(skb, priv->tx_headroom))
+ goto enomem;
+
+ WARN_ON(skb_is_nonlinear(skb));
+
+ /* Finally, create a contig FD from this skb */
+ err = skb_to_contig_fd(priv, skb, &fd, countptr, &offset);
+ if (unlikely(err < 0))
+ goto skb_to_fd_failed;
+
+ if (likely(dpa_xmit(priv, percpu_stats, queue_mapping, &fd) == 0))
+ return NETDEV_TX_OK;
+
+ /* dpa_xmit failed */
+ if (fd.bpid != FSL_DPAA_BPID_INV) {
+ (*countptr)--;
+ dpa_fd_release(net_dev, &fd);
+ percpu_stats->tx_errors++;
+ return NETDEV_TX_OK;
+ }
+ dpa_cleanup_tx_fd(priv, &fd);
+skb_to_fd_failed:
+enomem:
+ percpu_stats->tx_errors++;
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+}
--
1.7.11.7
Add support for Scatter/Gather (S/G) frames. The FMan can place
the frame content into multiple buffers and provide a S/G Table
(SGT) into one first buffer with references to the others.
Signed-off-by: Madalin Bucur <[email protected]>
---
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 54 +++-
.../net/ethernet/freescale/dpaa/dpaa_eth_common.h | 2 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c | 337 +++++++++++++++++++--
3 files changed, 373 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index c96995c..1c82338 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -117,6 +117,10 @@ int dpa_netdev_init(struct net_device *net_dev,
net_dev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_LLTX);
+ net_dev->hw_features |= NETIF_F_SG | NETIF_F_HIGHDMA;
+ /* The kernels enables GSO automatically, if we declare NETIF_F_SG.
+ * For conformity, we'll still declare GSO explicitly.
+ */
net_dev->features |= NETIF_F_GSO;
net_dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
@@ -1194,10 +1198,42 @@ void dpaa_eth_init_ports(struct mac_device *mac_dev,
port_fqs->rx_defq, &buf_layout[RX]);
}
+void dpa_release_sgt(struct qm_sg_entry *sgt)
+{
+ struct dpa_bp *dpa_bp;
+ struct bm_buffer bmb[DPA_BUFF_RELEASE_MAX];
+ int i = 0, j, timeout = 100;
+
+ memset(bmb, 0, sizeof(bmb));
+
+ do {
+ dpa_bp = dpa_bpid2pool(sgt[i].bpid);
+ WARN_ON(!dpa_bp);
+
+ j = 0;
+ do {
+ WARN_ON(sgt[i].extension);
+
+ bmb[j].hi = sgt[i].addr_hi;
+ bmb[j].lo = be32_to_cpu(sgt[i].addr_lo);
+
+ j++; i++;
+ } while (j < ARRAY_SIZE(bmb) &&
+ !sgt[i - 1].final &&
+ sgt[i - 1].bpid == sgt[i].bpid);
+
+ while (bman_release(dpa_bp->pool, bmb, j, 0) && --timeout)
+ cpu_relax();
+ } while (!sgt[i - 1].final);
+}
+
void dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd)
{
+ struct qm_sg_entry *sgt;
struct dpa_bp *dpa_bp;
struct bm_buffer bmb;
+ dma_addr_t addr;
+ void *vaddr;
int timeout = 100;
memset(&bmb, 0, sizeof(bmb));
@@ -1206,7 +1242,23 @@ void dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd)
dpa_bp = dpa_bpid2pool(fd->bpid);
WARN_ON(!dpa_bp);
- WARN_ON(fd->format == qm_fd_sg);
+ if (fd->format == qm_fd_sg) {
+ vaddr = phys_to_virt(fd->addr);
+ sgt = vaddr + dpa_fd_offset(fd);
+
+ dma_unmap_single(dpa_bp->dev, qm_fd_addr(fd), dpa_bp->size,
+ DMA_BIDIRECTIONAL);
+
+ dpa_release_sgt(sgt);
+
+ addr = dma_map_single(dpa_bp->dev, vaddr, dpa_bp->size,
+ DMA_BIDIRECTIONAL);
+ if (dma_mapping_error(dpa_bp->dev, addr)) {
+ dev_err(dpa_bp->dev, "DMA mapping failed");
+ return;
+ }
+ bm_buffer_set64(&bmb, addr);
+ }
while (bman_release(dpa_bp->pool, &bmb, 1, 0) && --timeout)
cpu_relax();
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
index 78a97d9..c3443e6 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
@@ -37,6 +37,7 @@
#include "dpaa_eth.h"
+#define DPA_SGT_MAX_ENTRIES 16 /* maximum number of entries in SG Table */
#define DPA_BUFF_RELEASE_MAX 8 /* maximum number of buffers released at once */
/* used in napi related functions */
@@ -89,6 +90,7 @@ void dpaa_eth_init_ports(struct mac_device *mac_dev,
struct fm_port_fqs *port_fqs,
struct dpa_buffer_layout *buf_layout,
struct device *dev);
+void dpa_release_sgt(struct qm_sg_entry *sgt);
void dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd);
int dpa_enable_tx_csum(struct dpa_priv *priv,
struct sk_buff *skb,
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
index c913dd6..5fbc167 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
@@ -38,6 +38,32 @@
#include "dpaa_eth.h"
#include "dpaa_eth_common.h"
+/* DMA map and add a page frag back into the bpool.
+ * @vaddr fragment must have been allocated with netdev_alloc_frag(),
+ * specifically for fitting into @dpa_bp.
+ */
+static void dpa_bp_recycle_frag(struct dpa_bp *dpa_bp, unsigned long vaddr,
+ int *count_ptr)
+{
+ struct bm_buffer bmb;
+ dma_addr_t addr;
+ int timeout = 100;
+
+ addr = dma_map_single(dpa_bp->dev, (void *)vaddr, dpa_bp->size,
+ DMA_BIDIRECTIONAL);
+ if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
+ dev_err(dpa_bp->dev, "DMA mapping failed");
+ return;
+ }
+
+ bm_buffer_set64(&bmb, addr);
+
+ while (bman_release(dpa_bp->pool, &bmb, 1, 0) && --timeout)
+ cpu_relax();
+
+ (*count_ptr)++;
+}
+
static int dpa_bp_add_8_bufs(const struct dpa_bp *dpa_bp)
{
struct bm_buffer bmb[8];
@@ -168,14 +194,45 @@ int dpaa_eth_refill_bpools(struct dpa_bp *dpa_bp, int *countptr)
struct sk_buff *dpa_cleanup_tx_fd(const struct dpa_priv *priv,
const struct qm_fd *fd)
{
+ const struct qm_sg_entry *sgt;
+ int i;
struct dpa_bp *dpa_bp = priv->dpa_bp;
dma_addr_t addr = qm_fd_addr(fd);
struct sk_buff **skbh = (struct sk_buff **)phys_to_virt(addr);
struct sk_buff *skb = *skbh;
const enum dma_data_direction dma_dir = DMA_TO_DEVICE;
+ int nr_frags;
+
+ if (unlikely(fd->format == qm_fd_sg)) {
+ nr_frags = skb_shinfo(skb)->nr_frags;
+ dma_unmap_single(dpa_bp->dev, addr, dpa_fd_offset(fd) +
+ sizeof(struct qm_sg_entry) * (1 + nr_frags),
+ dma_dir);
+
+ /* The sgt buffer has been allocated with netdev_alloc_frag(),
+ * it's from lowmem.
+ */
+ sgt = phys_to_virt(addr + dpa_fd_offset(fd));
+
+ /* sgt[0] is from lowmem, was dma_map_single()-ed */
+ dma_unmap_single(dpa_bp->dev, (dma_addr_t)sgt[0].addr,
+ sgt[0].length, dma_dir);
+
+ /* remaining pages were mapped with dma_map_page() */
+ for (i = 1; i < nr_frags; i++) {
+ WARN_ON(sgt[i].extension);
+
+ dma_unmap_page(dpa_bp->dev, (dma_addr_t)sgt[i].addr,
+ sgt[i].length, dma_dir);
+ }
+
+ /* Free the page frag that we allocated on Tx */
+ put_page(virt_to_head_page(sgt));
+ } else {
+ dma_unmap_single(dpa_bp->dev, addr,
+ skb_tail_pointer(skb) - (u8 *)skbh, dma_dir);
+ }
- dma_unmap_single(dpa_bp->dev, addr,
- skb_tail_pointer(skb) - (u8 *)skbh, dma_dir);
return skb;
}
@@ -210,6 +267,109 @@ static struct sk_buff *contig_fd_to_skb(const struct dpa_priv *priv,
return skb;
}
+/* Build an skb with the data of the first S/G entry in the linear portion and
+ * the rest of the frame as skb fragments.
+ *
+ * The page fragment holding the S/G Table is recycled here.
+ */
+static struct sk_buff *sg_fd_to_skb(const struct dpa_priv *priv,
+ const struct qm_fd *fd,
+ int *count_ptr)
+{
+ const struct qm_sg_entry *sgt;
+ dma_addr_t addr = qm_fd_addr(fd);
+ ssize_t fd_off = dpa_fd_offset(fd);
+ dma_addr_t sg_addr;
+ void *vaddr, *sg_vaddr;
+ struct dpa_bp *dpa_bp;
+ struct page *page, *head_page;
+ int frag_offset, frag_len;
+ int page_offset;
+ int i;
+ struct sk_buff *skb = NULL, *skb_tmp, **skbh;
+
+ vaddr = phys_to_virt(addr);
+ WARN_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES));
+
+ dpa_bp = priv->dpa_bp;
+ /* Iterate through the SGT entries and add data buffers to the skb */
+ sgt = vaddr + fd_off;
+ for (i = 0; i < DPA_SGT_MAX_ENTRIES; i++) {
+ /* Extension bit is not supported */
+ WARN_ON(sgt[i].extension);
+
+ /* We use a single global Rx pool */
+ WARN_ON(dpa_bp != dpa_bpid2pool(sgt[i].bpid));
+
+ sg_addr = qm_sg_addr(&sgt[i]);
+ sg_vaddr = phys_to_virt(sg_addr);
+ WARN_ON(!IS_ALIGNED((unsigned long)sg_vaddr,
+ SMP_CACHE_BYTES));
+
+ dma_unmap_single(dpa_bp->dev, sg_addr, dpa_bp->size,
+ DMA_BIDIRECTIONAL);
+ if (i == 0) {
+ skbh = (struct sk_buff **)sg_vaddr;
+ skb = *(skbh - 1);
+ WARN_ON(skb->head != sg_vaddr);
+
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* Make sure forwarded skbs will have enough space
+ * on Tx, if extra headers are added.
+ */
+ WARN_ON(fd_off != priv->rx_headroom);
+ skb_reserve(skb, fd_off);
+ skb_put(skb, sgt[i].length);
+ } else {
+ /* Not the first S/G entry; all data from buffer will
+ * be added in an skb fragment; fragment index is offset
+ * by one since first S/G entry was incorporated in the
+ * linear part of the skb.
+ *
+ * Caution: 'page' may be a tail page.
+ */
+ skbh = (struct sk_buff **)sg_vaddr;
+ skb_tmp = *(skbh - 1);
+ page = virt_to_page(sg_vaddr);
+ head_page = virt_to_head_page(sg_vaddr);
+
+ /* Free (only) the skbuff shell because its data buffer
+ * is already a frag in the main skb.
+ */
+ get_page(head_page);
+ dev_kfree_skb(skb_tmp);
+
+ /* Compute offset in (possibly tail) page */
+ page_offset = ((unsigned long)sg_vaddr &
+ (PAGE_SIZE - 1)) +
+ (page_address(page) - page_address(head_page));
+ /* page_offset only refers to the beginning of sgt[i];
+ * but the buffer itself may have an internal offset.
+ */
+ frag_offset = sgt[i].offset + page_offset;
+ frag_len = sgt[i].length;
+ /* skb_add_rx_frag() does no checking on the page; if
+ * we pass it a tail page, we'll end up with
+ * bad page accounting and eventually with segafults.
+ */
+ skb_add_rx_frag(skb, i - 1, head_page, frag_offset,
+ frag_len, dpa_bp->size);
+ }
+ /* Update the pool count for the current {cpu x bpool} */
+ (*count_ptr)--;
+
+ if (sgt[i].final)
+ break;
+ }
+ WARN_ONCE(i == DPA_SGT_MAX_ENTRIES, "No final bit on SGT\n");
+
+ /* recycle the SGT fragment */
+ WARN_ON(dpa_bp != dpa_bpid2pool(fd->bpid));
+ dpa_bp_recycle_frag(dpa_bp, (unsigned long)vaddr, count_ptr);
+ return skb;
+}
+
void dpa_rx(struct net_device *net_dev,
struct qman_portal *portal,
const struct dpa_priv *priv,
@@ -237,17 +397,20 @@ void dpa_rx(struct net_device *net_dev,
dpa_bp = priv->dpa_bp;
WARN_ON(dpa_bp != dpa_bpid2pool(fd->bpid));
- /* prefetch the first 64 bytes of the frame */
+ /* prefetch the first 64 bytes of the frame or the SGT start */
dma_unmap_single(dpa_bp->dev, addr, dpa_bp->size, DMA_BIDIRECTIONAL);
prefetch(phys_to_virt(addr) + dpa_fd_offset(fd));
- /* The only FD type that we may receive is contig */
- WARN_ON(fd->format != qm_fd_contig);
+ /* The only FD types that we may receive are contig and S/G */
+ WARN_ON((fd->format != qm_fd_contig) && (fd->format != qm_fd_sg));
- skb = contig_fd_to_skb(priv, fd);
+ if (likely(fd->format == qm_fd_contig))
+ skb = contig_fd_to_skb(priv, fd);
+ else
+ skb = sg_fd_to_skb(priv, fd, count_ptr);
- /* Account for the contig buffer
- * having been removed from the pool.
+ /* Account for either the contig buffer or the SGT buffer (depending on
+ * which case we were in) having been removed from the pool.
*/
(*count_ptr)--;
skb->protocol = eth_type_trans(skb, net_dev);
@@ -334,6 +497,122 @@ static int skb_to_contig_fd(struct dpa_priv *priv,
return 0;
}
+static int skb_to_sg_fd(struct dpa_priv *priv,
+ struct sk_buff *skb, struct qm_fd *fd)
+{
+ struct dpa_bp *dpa_bp = priv->dpa_bp;
+ dma_addr_t addr;
+ struct sk_buff **skbh;
+ struct net_device *net_dev = priv->net_dev;
+ int err;
+
+ struct qm_sg_entry *sgt;
+ void *sgt_buf;
+ void *buffer_start;
+ skb_frag_t *frag;
+ int i, j;
+ const enum dma_data_direction dma_dir = DMA_TO_DEVICE;
+ const int nr_frags = skb_shinfo(skb)->nr_frags;
+
+ fd->format = qm_fd_sg;
+
+ /* get a page frag to store the SGTable */
+ sgt_buf = netdev_alloc_frag(priv->tx_headroom +
+ sizeof(struct qm_sg_entry) * (1 + nr_frags));
+ if (unlikely(!sgt_buf)) {
+ netdev_err(net_dev, "netdev_alloc_frag() failed\n");
+ return -ENOMEM;
+ }
+
+ /* Enable L3/L4 hardware checksum computation.
+ *
+ * We must do this before dma_map_single(DMA_TO_DEVICE), because we may
+ * need to write into the skb.
+ */
+ err = dpa_enable_tx_csum(priv, skb, fd,
+ sgt_buf + DPA_TX_PRIV_DATA_SIZE);
+ if (unlikely(err < 0)) {
+ if (net_ratelimit())
+ netif_err(priv, tx_err, net_dev, "HW csum error: %d\n",
+ err);
+ goto csum_failed;
+ }
+
+ sgt = (struct qm_sg_entry *)(sgt_buf + priv->tx_headroom);
+ sgt[0].bpid = FSL_DPAA_BPID_INV;
+ sgt[0].offset = 0;
+ sgt[0].length = cpu_to_be32(skb_headlen(skb));
+ sgt[0].extension = 0;
+ sgt[0].final = 0;
+ addr = dma_map_single(dpa_bp->dev, skb->data, sgt[0].length, dma_dir);
+ if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
+ dev_err(dpa_bp->dev, "DMA mapping failed");
+ err = -EINVAL;
+ goto sg0_map_failed;
+ }
+ sgt[0].addr_hi = (u8)upper_32_bits(addr);
+ sgt[0].addr_lo = cpu_to_be32(lower_32_bits(addr));
+
+ /* populate the rest of SGT entries */
+ for (i = 1; i <= nr_frags; i++) {
+ frag = &skb_shinfo(skb)->frags[i - 1];
+ sgt[i].bpid = FSL_DPAA_BPID_INV;
+ sgt[i].offset = 0;
+ sgt[i].length = cpu_to_be32(frag->size);
+ sgt[i].extension = 0;
+ sgt[i].final = 0;
+
+ WARN_ON(!skb_frag_page(frag));
+ addr = skb_frag_dma_map(dpa_bp->dev, frag, 0, sgt[i].length,
+ dma_dir);
+ if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
+ dev_err(dpa_bp->dev, "DMA mapping failed");
+ err = -EINVAL;
+ goto sg_map_failed;
+ }
+
+ /* keep the offset in the address */
+ sgt[i].addr_hi = (u8)upper_32_bits(addr);
+ sgt[i].addr_lo = cpu_to_be32(lower_32_bits(addr));
+ }
+ sgt[i - 1].final = 1;
+
+ fd->length20 = skb->len;
+ fd->offset = priv->tx_headroom;
+
+ /* DMA map the SGT page */
+ buffer_start = (void *)sgt - priv->tx_headroom;
+ skbh = (struct sk_buff **)buffer_start;
+ *skbh = skb;
+
+ addr = dma_map_single(dpa_bp->dev, buffer_start, priv->tx_headroom +
+ sizeof(struct qm_sg_entry) * (1 + nr_frags),
+ dma_dir);
+ if (unlikely(dma_mapping_error(dpa_bp->dev, addr))) {
+ dev_err(dpa_bp->dev, "DMA mapping failed");
+ err = -EINVAL;
+ goto sgt_map_failed;
+ }
+
+ fd->bpid = FSL_DPAA_BPID_INV;
+ fd->cmd |= FM_FD_CMD_FCO;
+ fd->addr_hi = (u8)upper_32_bits(addr);
+ fd->addr_lo = lower_32_bits(addr);
+
+ return 0;
+
+sgt_map_failed:
+sg_map_failed:
+ for (j = 0; j < i; j++)
+ dma_unmap_page(dpa_bp->dev, qm_sg_addr(&sgt[j]),
+ cpu_to_be32(sgt[j].length), dma_dir);
+sg0_map_failed:
+csum_failed:
+ put_page(virt_to_head_page(sgt_buf));
+
+ return err;
+}
+
int dpa_tx(struct sk_buff *skb, struct net_device *net_dev)
{
struct dpa_priv *priv;
@@ -342,6 +621,7 @@ int dpa_tx(struct sk_buff *skb, struct net_device *net_dev)
struct rtnl_link_stats64 *percpu_stats;
int err = 0;
const int queue_mapping = dpa_get_queue_mapping(skb);
+ bool nonlinear = skb_is_nonlinear(skb);
int *countptr, offset = 0;
priv = netdev_priv(net_dev);
@@ -351,19 +631,38 @@ int dpa_tx(struct sk_buff *skb, struct net_device *net_dev)
clear_fd(&fd);
- /* We're going to store the skb backpointer at the beginning
- * of the data buffer, so we need a privately owned skb
- *
- * We've made sure skb is not shared in dev->priv_flags,
- * we need to verify the skb head is not cloned
- */
- if (skb_cow_head(skb, priv->tx_headroom))
- goto enomem;
+ if (!nonlinear) {
+ /* We're going to store the skb backpointer at the beginning
+ * of the data buffer, so we need a privately owned skb
+ *
+ * We've made sure skb is not shared in dev->priv_flags,
+ * we need to verify the skb head is not cloned
+ */
+ if (skb_cow_head(skb, priv->tx_headroom))
+ goto enomem;
+
+ WARN_ON(skb_is_nonlinear(skb));
+ }
- WARN_ON(skb_is_nonlinear(skb));
+ /* MAX_SKB_FRAGS is equal or larger than our DPA_SGT_MAX_ENTRIES;
+ * make sure we don't feed FMan with more fragments than it supports.
+ * Btw, we're using the first sgt entry to store the linear part of
+ * the skb, so we're one extra frag short.
+ */
+ if (nonlinear &&
+ likely(skb_shinfo(skb)->nr_frags < DPA_SGT_MAX_ENTRIES)) {
+ /* Just create a S/G fd based on the skb */
+ err = skb_to_sg_fd(priv, skb, &fd);
+ } else {
+ /* If the egress skb contains more fragments than we support
+ * we have no choice but to linearize it ourselves.
+ */
+ if (unlikely(nonlinear) && __skb_linearize(skb))
+ goto enomem;
- /* Finally, create a contig FD from this skb */
- err = skb_to_contig_fd(priv, skb, &fd, countptr, &offset);
+ /* Finally, create a contig FD from this skb */
+ err = skb_to_contig_fd(priv, skb, &fd, countptr, &offset);
+ }
if (unlikely(err < 0))
goto skb_to_fd_failed;
--
1.7.11.7
Allow the selection of the transmission queue based on the CPU id.
The DPAA Ethernet driver defines a ndo_select_queue() callback for
optimal selection of the egress FQ. That will override the XPS support
for this netdevice and should provide a certain increase in performance.
Standard XPS support is available by deselecting the introduced kconfig
option.
Signed-off-by: Madalin Bucur <[email protected]>
---
drivers/net/ethernet/freescale/dpaa/Kconfig | 10 ++++++++++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 3 +++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 6 ++++++
drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c | 8 ++++++++
drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h | 4 ++++
5 files changed, 31 insertions(+)
diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig
index 022d5aa..2577aac 100644
--- a/drivers/net/ethernet/freescale/dpaa/Kconfig
+++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
@@ -11,6 +11,16 @@ menuconfig FSL_DPAA_ETH
if FSL_DPAA_ETH
+config FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+ bool "Use driver's Tx queue selection mechanism"
+ default y
+ ---help---
+ The DPAA Ethernet driver defines a ndo_select_queue() callback for optimal selection
+ of the egress FQ. That will override the XPS support for this netdevice.
+ If for whatever reason you want to be in control of the egress FQ-to-CPU selection and mapping,
+ or simply don't want to use the driver's ndo_select_queue() callback, then unselect this
+ and use the standard XPS support instead.
+
config FSL_DPAA_ETH_FRIENDLY_IF_NAME
bool "Use fmX-macY names for the DPAA interfaces"
default y
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 67f89ab..6c16ddd 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -375,6 +375,9 @@ static struct net_device_ops dpaa_ops = {
.ndo_get_stats64 = dpa_get_stats64,
.ndo_set_mac_address = dpa_set_mac_address,
.ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+ .ndo_select_queue = dpa_select_queue,
+#endif
.ndo_change_mtu = dpa_change_mtu,
.ndo_set_rx_mode = dpa_set_rx_mode,
.ndo_init = dpa_ndo_init,
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index 45dc62d..a990c7b 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -405,9 +405,15 @@ static inline void _dpa_assign_wq(struct dpa_fq *fq)
}
}
+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+/* Use in lieu of skb_get_queue_mapping() */
+#define dpa_get_queue_mapping(skb) \
+ raw_smp_processor_id()
+#else
/* Use the queue selected by XPS */
#define dpa_get_queue_mapping(skb) \
skb_get_queue_mapping(skb)
+#endif
static inline void dpa_bp_free_pf(void *addr)
{
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index 1c82338..59a1920 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -619,6 +619,14 @@ bool dpa_bpid2pool_use(int bpid)
return false;
}
+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+u16 dpa_select_queue(struct net_device *net_dev, struct sk_buff *skb,
+ void *accel_priv, select_queue_fallback_t fallback)
+{
+ return dpa_get_queue_mapping(skb);
+}
+#endif
+
struct dpa_fq *dpa_fq_alloc(struct device *dev,
const struct fqid_cell *fqids,
struct list_head *list,
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
index c3443e6..20facd1 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
@@ -69,6 +69,10 @@ struct dpa_bp *dpa_bpid2pool(int bpid);
void dpa_bpid2pool_map(int bpid, struct dpa_bp *dpa_bp);
bool dpa_bpid2pool_use(int bpid);
void dpa_bp_drain(struct dpa_bp *bp);
+#ifdef CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE
+u16 dpa_select_queue(struct net_device *net_dev, struct sk_buff *skb,
+ void *accel_priv, select_queue_fallback_t fallback);
+#endif
struct dpa_fq *dpa_fq_alloc(struct device *dev,
const struct fqid_cell *fqids,
struct list_head *list,
--
1.7.11.7
Add support for basic ethtool operations.
Signed-off-by: Madalin Bucur <[email protected]>
---
drivers/net/ethernet/freescale/dpaa/Makefile | 2 +-
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 2 +
.../net/ethernet/freescale/dpaa/dpaa_eth_common.h | 3 +
drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 230 +++++++++++++++++++++
4 files changed, 236 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile
index 3847ec7..9b75d52 100644
--- a/drivers/net/ethernet/freescale/dpaa/Makefile
+++ b/drivers/net/ethernet/freescale/dpaa/Makefile
@@ -8,4 +8,4 @@ ccflags-y += -I$(FMAN)
obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
-fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o
+fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index 59a1920..656c5a8 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -133,6 +133,8 @@ int dpa_netdev_init(struct net_device *net_dev,
memcpy(net_dev->perm_addr, mac_addr, net_dev->addr_len);
memcpy(net_dev->dev_addr, mac_addr, net_dev->addr_len);
+ net_dev->ethtool_ops = &dpa_ethtool_ops;
+
net_dev->needed_headroom = priv->tx_headroom;
net_dev->watchdog_timeo = msecs_to_jiffies(tx_timeout);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
index 20facd1..8564bfa 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
@@ -43,6 +43,9 @@
/* used in napi related functions */
extern u16 qman_portal_max;
+/* from dpa_ethtool.c */
+extern const struct ethtool_ops dpa_ethtool_ops;
+
int dpa_netdev_init(struct net_device *net_dev,
const struct net_device_ops *dpaa_ops, u16 tx_timeout);
int dpa_start(struct net_device *net_dev);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
new file mode 100644
index 0000000..ebf049f
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
@@ -0,0 +1,230 @@
+/* Copyright 2008-2015 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/string.h>
+
+#include "dpaa_eth.h"
+#include "mac.h"
+#include "dpaa_eth_common.h"
+
+static int dpa_get_settings(struct net_device *net_dev,
+ struct ethtool_cmd *et_cmd)
+{
+ int err;
+ struct dpa_priv *priv;
+
+ priv = netdev_priv(net_dev);
+
+ if (!priv->mac_dev->phy_dev) {
+ netdev_dbg(net_dev, "phy device not initialized\n");
+ return 0;
+ }
+
+ err = phy_ethtool_gset(priv->mac_dev->phy_dev, et_cmd);
+
+ return err;
+}
+
+static int dpa_set_settings(struct net_device *net_dev,
+ struct ethtool_cmd *et_cmd)
+{
+ int err;
+ struct dpa_priv *priv;
+
+ priv = netdev_priv(net_dev);
+
+ if (!priv->mac_dev->phy_dev) {
+ netdev_err(net_dev, "phy device not initialized\n");
+ return -ENODEV;
+ }
+
+ err = phy_ethtool_sset(priv->mac_dev->phy_dev, et_cmd);
+ if (err < 0)
+ netdev_err(net_dev, "phy_ethtool_sset() = %d\n", err);
+
+ return err;
+}
+
+static void dpa_get_drvinfo(struct net_device *net_dev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ int len;
+
+ strlcpy(drvinfo->driver, KBUILD_MODNAME,
+ sizeof(drvinfo->driver));
+ len = snprintf(drvinfo->version, sizeof(drvinfo->version),
+ "%X", 0);
+ len = snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
+ "%X", 0);
+
+ if (len >= sizeof(drvinfo->fw_version)) {
+ /* Truncated output */
+ netdev_notice(net_dev, "snprintf() = %d\n", len);
+ }
+ strlcpy(drvinfo->bus_info, dev_name(net_dev->dev.parent->parent),
+ sizeof(drvinfo->bus_info));
+}
+
+static u32 dpa_get_msglevel(struct net_device *net_dev)
+{
+ return ((struct dpa_priv *)netdev_priv(net_dev))->msg_enable;
+}
+
+static void dpa_set_msglevel(struct net_device *net_dev,
+ u32 msg_enable)
+{
+ ((struct dpa_priv *)netdev_priv(net_dev))->msg_enable = msg_enable;
+}
+
+static int dpa_nway_reset(struct net_device *net_dev)
+{
+ int err;
+ struct dpa_priv *priv;
+
+ priv = netdev_priv(net_dev);
+
+ if (!priv->mac_dev->phy_dev) {
+ netdev_err(net_dev, "phy device not initialized\n");
+ return -ENODEV;
+ }
+
+ err = 0;
+ if (priv->mac_dev->phy_dev->autoneg) {
+ err = phy_start_aneg(priv->mac_dev->phy_dev);
+ if (err < 0)
+ netdev_err(net_dev, "phy_start_aneg() = %d\n",
+ err);
+ }
+
+ return err;
+}
+
+static void dpa_get_pauseparam(struct net_device *net_dev,
+ struct ethtool_pauseparam *epause)
+{
+ struct dpa_priv *priv;
+ struct mac_device *mac_dev;
+ struct phy_device *phy_dev;
+
+ priv = netdev_priv(net_dev);
+ mac_dev = priv->mac_dev;
+
+ phy_dev = mac_dev->phy_dev;
+ if (!phy_dev) {
+ netdev_err(net_dev, "phy device not initialized\n");
+ return;
+ }
+
+ epause->autoneg = mac_dev->autoneg_pause;
+ epause->rx_pause = mac_dev->rx_pause_active;
+ epause->tx_pause = mac_dev->tx_pause_active;
+}
+
+static int dpa_set_pauseparam(struct net_device *net_dev,
+ struct ethtool_pauseparam *epause)
+{
+ struct dpa_priv *priv;
+ struct mac_device *mac_dev;
+ struct phy_device *phy_dev;
+ int err;
+ u32 newadv, oldadv;
+ bool rx_pause, tx_pause;
+
+ priv = netdev_priv(net_dev);
+ mac_dev = priv->mac_dev;
+
+ phy_dev = mac_dev->phy_dev;
+ if (!phy_dev) {
+ netdev_err(net_dev, "phy device not initialized\n");
+ return -ENODEV;
+ }
+
+ if (!(phy_dev->supported & SUPPORTED_Pause) ||
+ (!(phy_dev->supported & SUPPORTED_Asym_Pause) &&
+ (epause->rx_pause != epause->tx_pause)))
+ return -EINVAL;
+
+ /* The MAC should know how to handle PAUSE frame autonegotiation before
+ * adjust_link is triggered by a forced renegotiation of sym/asym PAUSE
+ * settings.
+ */
+ mac_dev->autoneg_pause = !!epause->autoneg;
+ mac_dev->rx_pause_req = !!epause->rx_pause;
+ mac_dev->tx_pause_req = !!epause->tx_pause;
+
+ /* Determine the sym/asym advertised PAUSE capabilities from the desired
+ * rx/tx pause settings.
+ */
+ newadv = 0;
+ if (epause->rx_pause)
+ newadv = ADVERTISED_Pause | ADVERTISED_Asym_Pause;
+ if (epause->tx_pause)
+ newadv |= ADVERTISED_Asym_Pause;
+
+ oldadv = phy_dev->advertising &
+ (ADVERTISED_Pause | ADVERTISED_Asym_Pause);
+
+ /* If there are differences between the old and the new advertised
+ * values, restart PHY autonegotiation and advertise the new values.
+ */
+ if (oldadv != newadv) {
+ phy_dev->advertising &= ~(ADVERTISED_Pause
+ | ADVERTISED_Asym_Pause);
+ phy_dev->advertising |= newadv;
+ if (phy_dev->autoneg) {
+ err = phy_start_aneg(phy_dev);
+ if (err < 0)
+ netdev_err(net_dev, "phy_start_aneg() = %d\n",
+ err);
+ }
+ }
+
+ fman_get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
+ err = fman_set_mac_active_pause(mac_dev, rx_pause, tx_pause);
+ if (err < 0)
+ netdev_err(net_dev, "set_mac_active_pause() = %d\n", err);
+
+ return err;
+}
+
+const struct ethtool_ops dpa_ethtool_ops = {
+ .get_settings = dpa_get_settings,
+ .set_settings = dpa_set_settings,
+ .get_drvinfo = dpa_get_drvinfo,
+ .get_msglevel = dpa_get_msglevel,
+ .set_msglevel = dpa_set_msglevel,
+ .nway_reset = dpa_nway_reset,
+ .get_pauseparam = dpa_get_pauseparam,
+ .set_pauseparam = dpa_set_pauseparam,
+ .get_link = ethtool_op_get_link,
+};
--
1.7.11.7
Add a series of counters to be exported through ethtool:
- add detailed counters for reception errors;
- add detailed counters for QMan enqueue reject events;
- count the number of fragmented skbs received from the stack;
- count all frames received on the Tx confirmation path;
- add congestion group statistics;
- count the number of interrupts for each CPU.
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: Madalin Bucur <[email protected]>
---
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 12 ++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 34 ++++
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 40 ++++-
.../net/ethernet/freescale/dpaa/dpaa_eth_common.h | 2 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c | 1 +
drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 184 +++++++++++++++++++++
6 files changed, 271 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 6c16ddd..f71a0d2 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -93,6 +93,15 @@ static void dpa_rx_error(struct net_device *net_dev,
percpu_priv->stats.rx_errors++;
+ if (fd->status & FM_FD_ERR_DMA)
+ percpu_priv->rx_errors.dme++;
+ if (fd->status & FM_FD_ERR_PHYSICAL)
+ percpu_priv->rx_errors.fpe++;
+ if (fd->status & FM_FD_ERR_SIZE)
+ percpu_priv->rx_errors.fse++;
+ if (fd->status & FM_FD_ERR_PRS_HDR_ERR)
+ percpu_priv->rx_errors.phe++;
+
dpa_fd_release(net_dev, fd);
}
@@ -158,6 +167,8 @@ static void dpa_tx_conf(struct net_device *net_dev,
percpu_priv->stats.tx_errors++;
}
+ percpu_priv->tx_confirm++;
+
skb = dpa_cleanup_tx_fd(priv, fd);
dev_kfree_skb(skb);
@@ -287,6 +298,7 @@ static void priv_ern(struct qman_portal *portal,
percpu_priv->stats.tx_dropped++;
percpu_priv->stats.tx_fifo_errors++;
+ count_ern(percpu_priv, msg);
/* If we intended this buffer to go into the pool
* when the FM was done, we need to put it in
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index a990c7b..076d66a 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -183,6 +183,25 @@ struct dpa_bp {
void (*free_buf_cb)(void *addr);
};
+struct dpa_rx_errors {
+ u64 dme; /* DMA Error */
+ u64 fpe; /* Frame Physical Error */
+ u64 fse; /* Frame Size Error */
+ u64 phe; /* Header Error */
+};
+
+/* Counters for QMan ERN frames - one counter per rejection code */
+struct dpa_ern_cnt {
+ u64 cg_tdrop; /* Congestion group taildrop */
+ u64 wred; /* WRED congestion */
+ u64 err_cond; /* Error condition */
+ u64 early_window; /* Order restoration, frame too early */
+ u64 late_window; /* Order restoration, frame too late */
+ u64 fq_tdrop; /* FQ taildrop */
+ u64 fq_retired; /* FQ is retired */
+ u64 orp_zero; /* ORP disabled */
+};
+
struct dpa_napi_portal {
struct napi_struct napi;
struct qman_portal *p;
@@ -192,7 +211,13 @@ struct dpa_napi_portal {
struct dpa_percpu_priv {
struct net_device *net_dev;
struct dpa_napi_portal *np;
+ u64 in_interrupt;
+ u64 tx_confirm;
+ /* fragmented (non-linear) skbuffs received from the stack */
+ u64 tx_frag_skbuffs;
struct rtnl_link_stats64 stats;
+ struct dpa_rx_errors rx_errors;
+ struct dpa_ern_cnt ern_cnt;
};
struct dpa_priv {
@@ -219,6 +244,14 @@ struct dpa_priv {
* (and the same) congestion group.
*/
struct qman_cgr cgr;
+ /* If congested, when it began. Used for performance stats. */
+ u32 congestion_start_jiffies;
+ /* Number of jiffies the Tx port was congested. */
+ u32 congested_jiffies;
+ /* Counter for the number of times the CGR
+ * entered congestion state
+ */
+ u32 cgr_congested_count;
} cgr_data;
/* Use a per-port CGR for ingress traffic. */
bool use_ingress_cgr;
@@ -276,6 +309,7 @@ static inline int dpaa_eth_napi_schedule(struct dpa_percpu_priv *percpu_priv,
np->p = portal;
napi_schedule(&np->napi);
+ percpu_priv->in_interrupt++;
return 1;
}
}
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index 656c5a8..2a7cff2 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -767,10 +767,15 @@ static void dpaa_eth_cgscn(struct qman_portal *qm, struct qman_cgr *cgr,
struct dpa_priv *priv = (struct dpa_priv *)container_of(cgr,
struct dpa_priv, cgr_data.cgr);
- if (congested)
+ if (congested) {
+ priv->cgr_data.congestion_start_jiffies = jiffies;
netif_tx_stop_all_queues(priv->net_dev);
- else
+ priv->cgr_data.cgr_congested_count++;
+ } else {
+ priv->cgr_data.congested_jiffies +=
+ (jiffies - priv->cgr_data.congestion_start_jiffies);
netif_tx_wake_all_queues(priv->net_dev);
+ }
}
int dpaa_eth_cgr_init(struct dpa_priv *priv)
@@ -1274,6 +1279,37 @@ void dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd)
cpu_relax();
}
+void count_ern(struct dpa_percpu_priv *percpu_priv,
+ const struct qm_mr_entry *msg)
+{
+ switch (msg->ern.rc & QM_MR_RC_MASK) {
+ case QM_MR_RC_CGR_TAILDROP:
+ percpu_priv->ern_cnt.cg_tdrop++;
+ break;
+ case QM_MR_RC_WRED:
+ percpu_priv->ern_cnt.wred++;
+ break;
+ case QM_MR_RC_ERROR:
+ percpu_priv->ern_cnt.err_cond++;
+ break;
+ case QM_MR_RC_ORPWINDOW_EARLY:
+ percpu_priv->ern_cnt.early_window++;
+ break;
+ case QM_MR_RC_ORPWINDOW_LATE:
+ percpu_priv->ern_cnt.late_window++;
+ break;
+ case QM_MR_RC_FQ_TAILDROP:
+ percpu_priv->ern_cnt.fq_tdrop++;
+ break;
+ case QM_MR_RC_ORPWINDOW_RETIRED:
+ percpu_priv->ern_cnt.fq_retired++;
+ break;
+ case QM_MR_RC_ORP_ZERO:
+ percpu_priv->ern_cnt.orp_zero++;
+ break;
+ }
+}
+
/* Turn on HW checksum computation for this outgoing frame.
* If the current protocol is not something we support in this regard
* (or if the stack has already computed the SW checksum), we do nothing.
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
index 8564bfa..93b4717 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
@@ -99,6 +99,8 @@ void dpaa_eth_init_ports(struct mac_device *mac_dev,
struct device *dev);
void dpa_release_sgt(struct qm_sg_entry *sgt);
void dpa_fd_release(const struct net_device *net_dev, const struct qm_fd *fd);
+void count_ern(struct dpa_percpu_priv *percpu_priv,
+ const struct qm_mr_entry *msg);
int dpa_enable_tx_csum(struct dpa_priv *priv,
struct sk_buff *skb,
struct qm_fd *fd,
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
index 5fbc167..436e277 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c
@@ -653,6 +653,7 @@ int dpa_tx(struct sk_buff *skb, struct net_device *net_dev)
likely(skb_shinfo(skb)->nr_frags < DPA_SGT_MAX_ENTRIES)) {
/* Just create a S/G fd based on the skb */
err = skb_to_sg_fd(priv, skb, &fd);
+ percpu_priv->tx_frag_skbuffs++;
} else {
/* If the egress skb contains more fragments than we support
* we have no choice but to linearize it ourselves.
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
index ebf049f..274c484 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
@@ -37,6 +37,43 @@
#include "mac.h"
#include "dpaa_eth_common.h"
+static const char dpa_stats_percpu[][ETH_GSTRING_LEN] = {
+ "interrupts",
+ "rx packets",
+ "tx packets",
+ "tx confirm",
+ "tx S/G",
+ "tx error",
+ "rx error",
+ "bp count"
+};
+
+static char dpa_stats_global[][ETH_GSTRING_LEN] = {
+ /* dpa rx errors */
+ "rx dma error",
+ "rx frame physical error",
+ "rx frame size error",
+ "rx header error",
+
+ /* demultiplexing errors */
+ "qman cg_tdrop",
+ "qman wred",
+ "qman error cond",
+ "qman early window",
+ "qman late window",
+ "qman fq tdrop",
+ "qman fq retired",
+ "qman orp disabled",
+
+ /* congestion related stats */
+ "congestion time (ms)",
+ "entered congestion",
+ "congested (0/1)"
+};
+
+#define DPA_STATS_PERCPU_LEN ARRAY_SIZE(dpa_stats_percpu)
+#define DPA_STATS_GLOBAL_LEN ARRAY_SIZE(dpa_stats_global)
+
static int dpa_get_settings(struct net_device *net_dev,
struct ethtool_cmd *et_cmd)
{
@@ -217,6 +254,150 @@ static int dpa_set_pauseparam(struct net_device *net_dev,
return err;
}
+static int dpa_get_sset_count(struct net_device *net_dev, int type)
+{
+ unsigned int total_stats, num_stats;
+
+ num_stats = num_online_cpus() + 1;
+ total_stats = num_stats * DPA_STATS_PERCPU_LEN + DPA_STATS_GLOBAL_LEN;
+
+ switch (type) {
+ case ETH_SS_STATS:
+ return total_stats;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void copy_stats(struct dpa_percpu_priv *percpu_priv, int num_cpus,
+ int crr_cpu, u64 bp_count, u64 *data)
+{
+ int num_values = num_cpus + 1;
+ int crr = 0;
+
+ /* update current CPU's stats and also add them to the total values */
+ data[crr * num_values + crr_cpu] = percpu_priv->in_interrupt;
+ data[crr++ * num_values + num_cpus] += percpu_priv->in_interrupt;
+
+ data[crr * num_values + crr_cpu] = percpu_priv->stats.rx_packets;
+ data[crr++ * num_values + num_cpus] += percpu_priv->stats.rx_packets;
+
+ data[crr * num_values + crr_cpu] = percpu_priv->stats.tx_packets;
+ data[crr++ * num_values + num_cpus] += percpu_priv->stats.tx_packets;
+
+ data[crr * num_values + crr_cpu] = percpu_priv->tx_confirm;
+ data[crr++ * num_values + num_cpus] += percpu_priv->tx_confirm;
+
+ data[crr * num_values + crr_cpu] = percpu_priv->tx_frag_skbuffs;
+ data[crr++ * num_values + num_cpus] += percpu_priv->tx_frag_skbuffs;
+
+ data[crr * num_values + crr_cpu] = percpu_priv->stats.tx_errors;
+ data[crr++ * num_values + num_cpus] += percpu_priv->stats.tx_errors;
+
+ data[crr * num_values + crr_cpu] = percpu_priv->stats.rx_errors;
+ data[crr++ * num_values + num_cpus] += percpu_priv->stats.rx_errors;
+
+ data[crr * num_values + crr_cpu] = bp_count;
+ data[crr++ * num_values + num_cpus] += bp_count;
+}
+
+static void dpa_get_ethtool_stats(struct net_device *net_dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ u64 bp_count, cg_time, cg_num, cg_status;
+ struct dpa_percpu_priv *percpu_priv;
+ struct qm_mcr_querycgr query_cgr;
+ struct dpa_rx_errors rx_errors;
+ struct dpa_ern_cnt ern_cnt;
+ struct dpa_priv *priv;
+ unsigned int num_cpus, offset;
+ struct dpa_bp *dpa_bp;
+ int total_stats, i;
+
+ total_stats = dpa_get_sset_count(net_dev, ETH_SS_STATS);
+ priv = netdev_priv(net_dev);
+ dpa_bp = priv->dpa_bp;
+ num_cpus = num_online_cpus();
+ bp_count = 0;
+
+ memset(&rx_errors, 0, sizeof(struct dpa_rx_errors));
+ memset(&ern_cnt, 0, sizeof(struct dpa_ern_cnt));
+ memset(data, 0, total_stats * sizeof(u64));
+
+ for_each_online_cpu(i) {
+ percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
+
+ if (dpa_bp->percpu_count)
+ bp_count = *(per_cpu_ptr(dpa_bp->percpu_count, i));
+
+ rx_errors.dme += percpu_priv->rx_errors.dme;
+ rx_errors.fpe += percpu_priv->rx_errors.fpe;
+ rx_errors.fse += percpu_priv->rx_errors.fse;
+ rx_errors.phe += percpu_priv->rx_errors.phe;
+
+ ern_cnt.cg_tdrop += percpu_priv->ern_cnt.cg_tdrop;
+ ern_cnt.wred += percpu_priv->ern_cnt.wred;
+ ern_cnt.err_cond += percpu_priv->ern_cnt.err_cond;
+ ern_cnt.early_window += percpu_priv->ern_cnt.early_window;
+ ern_cnt.late_window += percpu_priv->ern_cnt.late_window;
+ ern_cnt.fq_tdrop += percpu_priv->ern_cnt.fq_tdrop;
+ ern_cnt.fq_retired += percpu_priv->ern_cnt.fq_retired;
+ ern_cnt.orp_zero += percpu_priv->ern_cnt.orp_zero;
+
+ copy_stats(percpu_priv, num_cpus, i, bp_count, data);
+ }
+
+ offset = (num_cpus + 1) * DPA_STATS_PERCPU_LEN;
+ memcpy(data + offset, &rx_errors, sizeof(struct dpa_rx_errors));
+
+ offset += sizeof(struct dpa_rx_errors) / sizeof(u64);
+ memcpy(data + offset, &ern_cnt, sizeof(struct dpa_ern_cnt));
+
+ /* gather congestion related counters */
+ cg_num = 0;
+ cg_status = 0;
+ cg_time = jiffies_to_msecs(priv->cgr_data.congested_jiffies);
+ if (qman_query_cgr(&priv->cgr_data.cgr, &query_cgr) == 0) {
+ cg_num = priv->cgr_data.cgr_congested_count;
+ cg_status = query_cgr.cgr.cs;
+
+ /* reset congestion stats (like QMan API does */
+ priv->cgr_data.congested_jiffies = 0;
+ priv->cgr_data.cgr_congested_count = 0;
+ }
+
+ offset += sizeof(struct dpa_ern_cnt) / sizeof(u64);
+ data[offset++] = cg_time;
+ data[offset++] = cg_num;
+ data[offset++] = cg_status;
+}
+
+static void dpa_get_strings(struct net_device *net_dev, u32 stringset, u8 *data)
+{
+ unsigned int i, j, num_cpus, size;
+ char string_cpu[ETH_GSTRING_LEN];
+ u8 *strings;
+
+ memset(string_cpu, 0, sizeof(string_cpu));
+ strings = data;
+ num_cpus = num_online_cpus();
+ size = DPA_STATS_GLOBAL_LEN * ETH_GSTRING_LEN;
+
+ for (i = 0; i < DPA_STATS_PERCPU_LEN; i++) {
+ for (j = 0; j < num_cpus; j++) {
+ snprintf(string_cpu, ETH_GSTRING_LEN, "%s [CPU %d]",
+ dpa_stats_percpu[i], j);
+ memcpy(strings, string_cpu, ETH_GSTRING_LEN);
+ strings += ETH_GSTRING_LEN;
+ }
+ snprintf(string_cpu, ETH_GSTRING_LEN, "%s [TOTAL]",
+ dpa_stats_percpu[i]);
+ memcpy(strings, string_cpu, ETH_GSTRING_LEN);
+ strings += ETH_GSTRING_LEN;
+ }
+ memcpy(strings, dpa_stats_global, size);
+}
+
const struct ethtool_ops dpa_ethtool_ops = {
.get_settings = dpa_get_settings,
.set_settings = dpa_set_settings,
@@ -227,4 +408,7 @@ const struct ethtool_ops dpa_ethtool_ops = {
.get_pauseparam = dpa_get_pauseparam,
.set_pauseparam = dpa_set_pauseparam,
.get_link = ethtool_op_get_link,
+ .get_sset_count = dpa_get_sset_count,
+ .get_ethtool_stats = dpa_get_ethtool_stats,
+ .get_strings = dpa_get_strings,
};
--
1.7.11.7
Export Frame Queue and Buffer Pool IDs through sysfs.
Signed-off-by: Madalin Bucur <[email protected]>
---
drivers/net/ethernet/freescale/dpaa/Makefile | 2 +-
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 3 +
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 2 +
.../net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c | 167 +++++++++++++++++++++
5 files changed, 175 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c
diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile
index 9b75d52..141ade4 100644
--- a/drivers/net/ethernet/freescale/dpaa/Makefile
+++ b/drivers/net/ethernet/freescale/dpaa/Makefile
@@ -8,4 +8,4 @@ ccflags-y += -I$(FMAN)
obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
-fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o
+fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o dpaa_eth_sysfs.o
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index f71a0d2..7d4d21a 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -691,6 +691,8 @@ static int dpaa_eth_probe(struct platform_device *pdev)
if (err < 0)
goto netdev_init_failed;
+ dpaa_eth_sysfs_init(&net_dev->dev);
+
netif_info(priv, probe, net_dev, "Probed interface %s\n",
net_dev->name);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index 076d66a..9651e24 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -356,6 +356,9 @@ static inline u16 dpa_get_headroom(struct dpa_buffer_layout *bl)
return bl->data_align ? ALIGN(headroom, bl->data_align) : headroom;
}
+void dpaa_eth_sysfs_remove(struct device *dev);
+void dpaa_eth_sysfs_init(struct device *dev);
+
void dpa_napi_del(struct net_device *net_dev);
static inline void clear_fd(struct qm_fd *fd)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index 2a7cff2..3003832 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -330,6 +330,8 @@ int dpa_remove(struct platform_device *pdev)
priv = netdev_priv(net_dev);
+ dpaa_eth_sysfs_remove(dev);
+
dev_set_drvdata(dev, NULL);
unregister_netdev(net_dev);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c
new file mode 100644
index 0000000..56588e0
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c
@@ -0,0 +1,167 @@
+/* Copyright 2008-2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kthread.h>
+#include <linux/io.h>
+#include <linux/of_net.h>
+#include "dpaa_eth.h"
+#include "mac.h"
+
+static ssize_t dpaa_eth_show_addr(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dpa_priv *priv = netdev_priv(to_net_dev(dev));
+ struct mac_device *mac_dev = priv->mac_dev;
+
+ if (mac_dev)
+ return sprintf(buf, "%llx",
+ (unsigned long long)mac_dev->res->start);
+ else
+ return sprintf(buf, "none");
+}
+
+static ssize_t dpaa_eth_show_fqids(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dpa_priv *priv = netdev_priv(to_net_dev(dev));
+ ssize_t bytes = 0;
+ int i = 0;
+ char *str;
+ struct dpa_fq *fq;
+ struct dpa_fq *tmp;
+ struct dpa_fq *prev = NULL;
+ u32 first_fqid = 0;
+ u32 last_fqid = 0;
+ char *prevstr = NULL;
+
+ list_for_each_entry_safe(fq, tmp, &priv->dpa_fq_list, list) {
+ switch (fq->fq_type) {
+ case FQ_TYPE_RX_DEFAULT:
+ str = "Rx default";
+ break;
+ case FQ_TYPE_RX_ERROR:
+ str = "Rx error";
+ break;
+ case FQ_TYPE_TX_CONFIRM:
+ str = "Tx default confirmation";
+ break;
+ case FQ_TYPE_TX_CONF_MQ:
+ str = "Tx confirmation (mq)";
+ break;
+ case FQ_TYPE_TX_ERROR:
+ str = "Tx error";
+ break;
+ case FQ_TYPE_TX:
+ str = "Tx";
+ break;
+ default:
+ str = "Unknown";
+ }
+
+ if (prev && (abs(fq->fqid - prev->fqid) != 1 ||
+ str != prevstr)) {
+ if (last_fqid == first_fqid)
+ bytes += sprintf(buf + bytes,
+ "%s: %d\n", prevstr, prev->fqid);
+ else
+ bytes += sprintf(buf + bytes,
+ "%s: %d - %d\n", prevstr,
+ first_fqid, last_fqid);
+ }
+
+ if (prev && abs(fq->fqid - prev->fqid) == 1 &&
+ str == prevstr) {
+ last_fqid = fq->fqid;
+ } else {
+ first_fqid = fq->fqid;
+ last_fqid = fq->fqid;
+ }
+
+ prev = fq;
+ prevstr = str;
+ i++;
+ }
+
+ if (prev) {
+ if (last_fqid == first_fqid)
+ bytes += sprintf(buf + bytes, "%s: %d\n", prevstr,
+ prev->fqid);
+ else
+ bytes += sprintf(buf + bytes, "%s: %d - %d\n", prevstr,
+ first_fqid, last_fqid);
+ }
+
+ return bytes;
+}
+
+static ssize_t dpaa_eth_show_bpids(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ ssize_t bytes = 0;
+ struct dpa_priv *priv = netdev_priv(to_net_dev(dev));
+ struct dpa_bp *dpa_bp = priv->dpa_bp;
+ int i = 0;
+
+ for (i = 0; i < priv->bp_count; i++)
+ bytes += snprintf(buf + bytes, PAGE_SIZE - bytes, "%u\n",
+ dpa_bp[i].bpid);
+
+ return bytes;
+}
+
+static struct device_attribute dpaa_eth_attrs[] = {
+ __ATTR(device_addr, S_IRUGO, dpaa_eth_show_addr, NULL),
+ __ATTR(fqids, S_IRUGO, dpaa_eth_show_fqids, NULL),
+ __ATTR(bpids, S_IRUGO, dpaa_eth_show_bpids, NULL),
+};
+
+void dpaa_eth_sysfs_init(struct device *dev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dpaa_eth_attrs); i++)
+ if (device_create_file(dev, &dpaa_eth_attrs[i])) {
+ dev_err(dev, "Error creating sysfs file\n");
+ while (i > 0)
+ device_remove_file(dev, &dpaa_eth_attrs[--i]);
+ return;
+ }
+}
+
+void dpaa_eth_sysfs_remove(struct device *dev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dpaa_eth_attrs); i++)
+ device_remove_file(dev, &dpaa_eth_attrs[i]);
+}
--
1.7.11.7
Add trace points on the hot processing path.
Signed-off-by: Ruxandra Ioana Radulescu <[email protected]>
---
drivers/net/ethernet/freescale/dpaa/Makefile | 1 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 12 ++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 4 +
.../net/ethernet/freescale/dpaa/dpaa_eth_trace.h | 141 +++++++++++++++++++++
4 files changed, 158 insertions(+)
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h
diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile
index 141ade4..15ed1c4 100644
--- a/drivers/net/ethernet/freescale/dpaa/Makefile
+++ b/drivers/net/ethernet/freescale/dpaa/Makefile
@@ -9,3 +9,4 @@ ccflags-y += -I$(FMAN)
obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o dpaa_eth_sysfs.o
+CFLAGS_dpaa_eth.o := -I$(src)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 7d4d21a..76df948 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -57,6 +57,12 @@
#include "dpaa_eth.h"
#include "dpaa_eth_common.h"
+/* CREATE_TRACE_POINTS only needs to be defined once. Other dpa files
+ * using trace events only need to #include <trace/events/sched.h>
+ */
+#define CREATE_TRACE_POINTS
+#include "dpaa_eth_trace.h"
+
/* Valid checksum indication */
#define DPA_CSUM_VALID 0xFFFF
@@ -219,6 +225,9 @@ static enum qman_cb_dqrr_result rx_default_dqrr(struct qman_portal *portal,
priv = netdev_priv(net_dev);
dpa_bp = priv->dpa_bp;
+ /* Trace the Rx fd */
+ trace_dpa_rx_fd(net_dev, fq, &dq->fd);
+
percpu_priv = this_cpu_ptr(priv->percpu_priv);
count_ptr = this_cpu_ptr(dpa_bp->percpu_count);
@@ -272,6 +281,9 @@ static enum qman_cb_dqrr_result conf_dflt_dqrr(struct qman_portal *portal,
net_dev = ((struct dpa_fq *)fq)->net_dev;
priv = netdev_priv(net_dev);
+ /* Trace the fd */
+ trace_dpa_tx_conf_fd(net_dev, fq, &dq->fd);
+
percpu_priv = this_cpu_ptr(priv->percpu_priv);
if (dpaa_eth_napi_schedule(percpu_priv, portal))
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index 9651e24..81a2abc 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -36,6 +36,7 @@
#include "fman.h"
#include "mac.h"
+#include "dpaa_eth_trace.h"
extern int dpa_rx_extra_headroom;
extern int dpa_max_frm;
@@ -392,6 +393,9 @@ static inline int dpa_xmit(struct dpa_priv *priv,
if (fd->bpid == FSL_DPAA_BPID_INV)
fd->cmd |= qman_fq_fqid(priv->conf_fqs[queue]);
+ /* Trace this Tx fd */
+ trace_dpa_tx_fd(priv->net_dev, egress_fq, fd);
+
for (i = 0; i < 100000; i++) {
err = qman_enqueue(egress_fq, fd, 0);
if (err != -EBUSY)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h
new file mode 100644
index 0000000..3b67477
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h
@@ -0,0 +1,141 @@
+/* Copyright 2013-2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM dpaa_eth
+
+#if !defined(_DPAA_ETH_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _DPAA_ETH_TRACE_H
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include "dpaa_eth.h"
+#include <linux/tracepoint.h>
+
+#define fd_format_name(format) { qm_fd_##format, #format }
+#define fd_format_list \
+ fd_format_name(contig), \
+ fd_format_name(sg)
+
+/* This is used to declare a class of events.
+ * individual events of this type will be defined below.
+ */
+
+/* Store details about a frame descriptor and the FQ on which it was
+ * transmitted/received.
+ */
+DECLARE_EVENT_CLASS(dpaa_eth_fd,
+ /* Trace function prototype */
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ /* Repeat argument list here */
+ TP_ARGS(netdev, fq, fd),
+
+ /* A structure containing the relevant information we want to record.
+ * Declare name and type for each normal element, name, type and size
+ * for arrays. Use __string for variable length strings.
+ */
+ TP_STRUCT__entry(
+ __field(u32, fqid)
+ __field(u64, fd_addr)
+ __field(u8, fd_format)
+ __field(u16, fd_offset)
+ __field(u32, fd_length)
+ __field(u32, fd_status)
+ __string(name, netdev->name)
+ ),
+
+ /* The function that assigns values to the above declared fields */
+ TP_fast_assign(
+ __entry->fqid = fq->fqid;
+ __entry->fd_addr = qm_fd_addr_get64(fd);
+ __entry->fd_format = fd->format;
+ __entry->fd_offset = dpa_fd_offset(fd);
+ __entry->fd_length = dpa_fd_length(fd);
+ __entry->fd_status = fd->status;
+ __assign_str(name, netdev->name);
+ ),
+
+ /* This is what gets printed when the trace event is triggered */
+ TP_printk("[%s] fqid=%d, fd: addr=0x%llx, format=%s, off=%u, len=%u, status=0x%08x",
+ __get_str(name), __entry->fqid, __entry->fd_addr,
+ __print_symbolic(__entry->fd_format, fd_format_list),
+ __entry->fd_offset, __entry->fd_length, __entry->fd_status)
+);
+
+/* Now declare events of the above type. Format is:
+ * DEFINE_EVENT(class, name, proto, args), with proto and args same as for class
+ */
+
+/* Tx (egress) fd */
+DEFINE_EVENT(dpaa_eth_fd, dpa_tx_fd,
+
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ TP_ARGS(netdev, fq, fd)
+);
+
+/* Rx fd */
+DEFINE_EVENT(dpaa_eth_fd, dpa_rx_fd,
+
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ TP_ARGS(netdev, fq, fd)
+);
+
+/* Tx confirmation fd */
+DEFINE_EVENT(dpaa_eth_fd, dpa_tx_conf_fd,
+
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ TP_ARGS(netdev, fq, fd)
+);
+
+/* If only one event of a certain type needs to be declared, use TRACE_EVENT().
+ * The syntax is the same as for DECLARE_EVENT_CLASS().
+ */
+
+#endif /* _DPAA_ETH_TRACE_H */
+
+/* This must be outside ifdef _DPAA_ETH_TRACE_H */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE dpaa_eth_trace
+#include <trace/define_trace.h>
--
1.7.11.7
From: Madalin Bucur <[email protected]>
Date: Thu, 3 Dec 2015 15:49:43 +0200
> @@ -0,0 +1,22 @@
> +menuconfig FSL_DPAA_ETH
> + tristate "DPAA Ethernet"
> + depends on FSL_SOC && FSL_BMAN && FSL_QMAN && FSL_FMAN
> + select PHYLIB
> + select FSL_FMAN_MAC
I do not see the FSL_FMAN_MAC Kconfig symbol defined anywhere in the
tree.
On Fri, 2015-12-04 at 14:55 -0500, David Miller wrote:
> From: Madalin Bucur <[email protected]>
> Date: Thu, 3 Dec 2015 15:49:43 +0200
>
> > @@ -0,0 +1,22 @@
> > +menuconfig FSL_DPAA_ETH
> > +?????tristate "DPAA Ethernet"
> > +?????depends on FSL_SOC && FSL_BMAN && FSL_QMAN && FSL_FMAN
> > +?????select PHYLIB
> > +?????select FSL_FMAN_MAC
>
> I do not see the FSL_FMAN_MAC Kconfig symbol defined anywhere in the
> tree.
I believe this patch series is dependent on two
other patch series mentioned in the cover letter.
---
The latest FMan driver patches were submitted by Igal Liberman:
https://patchwork.ozlabs.org/project/netdev/list/?submitter=64715&state=*
The latest Q/BMan drivers were submitted by Roy Pledge:
https://patchwork.ozlabs.org/project/linuxppc-dev/list/?submitter=66331&state=*
From: Joe Perches <[email protected]>
Date: Fri, 04 Dec 2015 12:00:35 -0800
> On Fri, 2015-12-04 at 14:55 -0500, David Miller wrote:
>> From: Madalin Bucur <[email protected]>
>> Date: Thu, 3 Dec 2015 15:49:43 +0200
>>
>> > @@ -0,0 +1,22 @@
>> > +menuconfig FSL_DPAA_ETH
>> > +?????tristate "DPAA Ethernet"
>> > +?????depends on FSL_SOC && FSL_BMAN && FSL_QMAN && FSL_FMAN
>> > +?????select PHYLIB
>> > +?????select FSL_FMAN_MAC
>>
>> I do not see the FSL_FMAN_MAC Kconfig symbol defined anywhere in the
>> tree.
>
> I believe this patch series is dependent on two
> other patch series mentioned in the cover letter.
Then this shouldn't have been submitted.
The dependent series has been through a lot of changes and still needs
lots of work, and is very far from being applied.
Posting patches depending upon it is therefore wholly inapproprate.
That time and effort should be spent putting the dependent series
into proper shape.
Since I see what is happening here, I am going to simply ignore all
future submissions of dpaa_eth, until the dependencies are worked
out properly so don't bother posting this stuff again until that
happens.
Thanks.