Hello,
Hi3519 soc is mainly used for ip camera and sport DV solutions. This patchset adds initial support
for Hi3519 soc. It includes clock driver, arch configuration, debug uart configuration and device tree.
It has been tested on hi3519 reference board.
Spi-nor flash driver and other peripheral drivers will be submitted later.
Any comments will be appreciated!
Thanks!
Change Log
----------
v4:
-Rebase to v4.4-rc7
-Divide patches according to Rob's comments
-Add spi nodes in hi3519-demb.dts
v3:
-Rebase to v4.4-rc4
-Adjust according to Arnd's comments
-Remove ARCH_HI3519, using ARCH_HISI directly
v2:
-Rebase to v4.4-rc3
-Put dt-binding doc and header file in a separate patch.
-Delete unused clocks definitions.
-Adjust the ARCH_xxx order in Kconfig file
-Rename ARCH_HI3xxx to ARCH_36xx
Jiancheng Xue (6):
clk: hisilicon: add CRG driver for hi3519 soc
ARM: hisi: add compatible string for Hi3519 soc
ARM: config: hisi: enable CONFIG_RESET_CONTROLLER
ARM: debug: add hi3519 debug uart
mfd: dt-bindings: add device tree bindings for Hi3519 sysctrl
ARM: dts: add dts files for Hi3519
.../devicetree/bindings/clock/hi3519-crg.txt | 46 ++++++
Documentation/devicetree/bindings/mfd/hi3519.txt | 14 ++
arch/arm/Kconfig.debug | 10 ++
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/hi3519-demb.dts | 42 +++++
arch/arm/boot/dts/hi3519.dtsi | 175 +++++++++++++++++++++
arch/arm/configs/hisi_defconfig | 1 +
arch/arm/mach-hisi/hisilicon.c | 23 +--
drivers/clk/hisilicon/Kconfig | 7 +
drivers/clk/hisilicon/Makefile | 2 +
drivers/clk/hisilicon/clk-hi3519.c | 103 ++++++++++++
drivers/clk/hisilicon/reset.c | 149 ++++++++++++++++++
drivers/clk/hisilicon/reset.h | 32 ++++
include/dt-bindings/clock/hi3519-clock.h | 43 +++++
14 files changed, 630 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/hi3519-crg.txt
create mode 100644 Documentation/devicetree/bindings/mfd/hi3519.txt
create mode 100644 arch/arm/boot/dts/hi3519-demb.dts
create mode 100644 arch/arm/boot/dts/hi3519.dtsi
create mode 100644 drivers/clk/hisilicon/clk-hi3519.c
create mode 100644 drivers/clk/hisilicon/reset.c
create mode 100644 drivers/clk/hisilicon/reset.h
create mode 100644 include/dt-bindings/clock/hi3519-clock.h
--
1.9.1
The CRG(Clock and Reset Generator) block provides clock
and reset signals for other modules in hi3519 soc.
Signed-off-by: Jiancheng Xue <[email protected]>
---
.../devicetree/bindings/clock/hi3519-crg.txt | 46 +++++++
drivers/clk/hisilicon/Kconfig | 7 +
drivers/clk/hisilicon/Makefile | 2 +
drivers/clk/hisilicon/clk-hi3519.c | 103 ++++++++++++++
drivers/clk/hisilicon/reset.c | 149 +++++++++++++++++++++
drivers/clk/hisilicon/reset.h | 32 +++++
include/dt-bindings/clock/hi3519-clock.h | 43 ++++++
7 files changed, 382 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/hi3519-crg.txt
create mode 100644 drivers/clk/hisilicon/clk-hi3519.c
create mode 100644 drivers/clk/hisilicon/reset.c
create mode 100644 drivers/clk/hisilicon/reset.h
create mode 100644 include/dt-bindings/clock/hi3519-clock.h
diff --git a/Documentation/devicetree/bindings/clock/hi3519-crg.txt b/Documentation/devicetree/bindings/clock/hi3519-crg.txt
new file mode 100644
index 0000000..2d23950
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi3519-crg.txt
@@ -0,0 +1,46 @@
+* Hisilicon Hi3519 Clock and Reset Generator(CRG)
+
+The Hi3519 CRG module provides clock and reset signals to various
+controllers within the SoC.
+
+This binding uses the following bindings:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+ Documentation/devicetree/bindings/reset/reset.txt
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "hisilicon,hi3519-crg" - controller compatible with Hi3519 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3519-clock.h>.
+
+- #reset-cells: should be 2.
+
+A reset signal can be controlled by writing a bit register in the CRG module.
+The reset specifier consists of two cells. The first cell represents the
+register offset relative to the base address. The second cell represents the
+bit index in the register.
+
+Example: CRG nodes
+CRG: clock-reset-controller@12010000 {
+ compatible = "hisilicon,hi3519-crg";
+ reg = <0x12010000 0x10000>;
+ #clock-cells = <1>;
+ #reset-cells = <2>;
+};
+
+Example: consumer nodes
+i2c0: i2c@12110000 {
+ compatible = "hisilicon,hi3519-i2c";
+ reg = <0x12110000 0x1000>;
+ clocks = <&CRG HI3519_I2C0_RST>;*/
+ resets = <&CRG 0xe4 0>;
+};
diff --git a/drivers/clk/hisilicon/Kconfig b/drivers/clk/hisilicon/Kconfig
index e434854..b6baebf 100644
--- a/drivers/clk/hisilicon/Kconfig
+++ b/drivers/clk/hisilicon/Kconfig
@@ -1,3 +1,10 @@
+config COMMON_CLK_HI3519
+ tristate "Clock Driver for Hi3519"
+ depends on ARCH_HISI
+ default y
+ help
+ Build the clock driver for hi3519.
+
config COMMON_CLK_HI6220
bool "Hi6220 Clock Driver"
depends on ARCH_HISI || COMPILE_TEST
diff --git a/drivers/clk/hisilicon/Makefile b/drivers/clk/hisilicon/Makefile
index 74dba31..3f57b09 100644
--- a/drivers/clk/hisilicon/Makefile
+++ b/drivers/clk/hisilicon/Makefile
@@ -4,8 +4,10 @@
obj-y += clk.o clkgate-separated.o clkdivider-hi6220.o
+obj-$(CONFIG_RESET_CONTROLLER) += reset.o
obj-$(CONFIG_ARCH_HI3xxx) += clk-hi3620.o
obj-$(CONFIG_ARCH_HIP04) += clk-hip04.o
obj-$(CONFIG_ARCH_HIX5HD2) += clk-hix5hd2.o
obj-$(CONFIG_COMMON_CLK_HI6220) += clk-hi6220.o
obj-$(CONFIG_STUB_CLK_HI6220) += clk-hi6220-stub.o
+obj-$(CONFIG_COMMON_CLK_HI3519) += clk-hi3519.o
diff --git a/drivers/clk/hisilicon/clk-hi3519.c b/drivers/clk/hisilicon/clk-hi3519.c
new file mode 100644
index 0000000..e220234
--- /dev/null
+++ b/drivers/clk/hisilicon/clk-hi3519.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/of_address.h>
+#include <dt-bindings/clock/hi3519-clock.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include "clk.h"
+#include "reset.h"
+
+#define HI3519_FIXED_24M (HI3519_EXT_CLKS + 1)
+#define HI3519_FIXED_50M (HI3519_EXT_CLKS + 2)
+#define HI3519_FIXED_75M (HI3519_EXT_CLKS + 3)
+#define HI3519_FIXED_125M (HI3519_EXT_CLKS + 4)
+#define HI3519_FIXED_150M (HI3519_EXT_CLKS + 5)
+#define HI3519_FIXED_200M (HI3519_EXT_CLKS + 6)
+#define HI3519_FIXED_250M (HI3519_EXT_CLKS + 7)
+#define HI3519_FIXED_300M (HI3519_EXT_CLKS + 8)
+#define HI3519_FIXED_400M (HI3519_EXT_CLKS + 9)
+#define HI3519_FMC_MUX (HI3519_EXT_CLKS + 10)
+
+#define HI3519_NR_CLKS 128
+#define HI3519_NR_RSTS 128
+
+static struct hisi_fixed_rate_clock hi3519_fixed_rate_clks[] __initdata = {
+ { HI3519_FIXED_3M, "3m", NULL, CLK_IS_ROOT, 3000000, },
+ { HI3519_FIXED_24M, "24m", NULL, CLK_IS_ROOT, 24000000, },
+ { HI3519_FIXED_50M, "50m", NULL, CLK_IS_ROOT, 50000000, },
+ { HI3519_FIXED_75M, "75m", NULL, CLK_IS_ROOT, 75000000, },
+ { HI3519_FIXED_125M, "125m", NULL, CLK_IS_ROOT, 125000000, },
+ { HI3519_FIXED_150M, "150m", NULL, CLK_IS_ROOT, 150000000, },
+ { HI3519_FIXED_200M, "200m", NULL, CLK_IS_ROOT, 200000000, },
+ { HI3519_FIXED_250M, "250m", NULL, CLK_IS_ROOT, 250000000, },
+ { HI3519_FIXED_300M, "300m", NULL, CLK_IS_ROOT, 300000000, },
+ { HI3519_FIXED_400M, "400m", NULL, CLK_IS_ROOT, 400000000, },
+};
+
+static const char *fmc_mux_p[] __initconst = {
+ "24m", "75m", "125m", "150m", "200m", "250m", "300m", "400m", };
+static u32 fmc_mux_table[] = {0, 1, 2, 3, 4, 5, 6, 7};
+
+static struct hisi_mux_clock hi3519_mux_clks[] __initdata = {
+ { HI3519_FMC_MUX, "fmc_mux", fmc_mux_p, ARRAY_SIZE(fmc_mux_p),
+ CLK_SET_RATE_PARENT, 0xc0, 2, 3, 0, fmc_mux_table, },
+};
+
+static struct hisi_gate_clock hi3519_gate_clks[] __initdata = {
+ /* fmc */
+ { HI3519_FMC_CLK, "clk_fmc", "fmc_mux",
+ CLK_SET_RATE_PARENT, 0xc0, 1, 0, },
+ /* uart */
+ { HI3519_UART0_CLK, "clk_uart0", "24m",
+ CLK_SET_RATE_PARENT, 0xe4, 20, 0, },
+ { HI3519_UART1_CLK, "clk_uart1", "24m",
+ CLK_SET_RATE_PARENT, 0xe4, 21, 0, },
+ { HI3519_UART2_CLK, "clk_uart2", "24m",
+ CLK_SET_RATE_PARENT, 0xe4, 22, 0, },
+ { HI3519_UART3_CLK, "clk_uart3", "24m",
+ CLK_SET_RATE_PARENT, 0xe4, 23, 0, },
+ { HI3519_UART4_CLK, "clk_uart4", "24m",
+ CLK_SET_RATE_PARENT, 0xe4, 24, 0, },
+ { HI3519_SPI0_CLK, "clk_spi0", "50m",
+ CLK_SET_RATE_PARENT, 0xe4, 16, 0, },
+ { HI3519_SPI1_CLK, "clk_spi1", "50m",
+ CLK_SET_RATE_PARENT, 0xe4, 17, 0, },
+ { HI3519_SPI2_CLK, "clk_spi2", "50m",
+ CLK_SET_RATE_PARENT, 0xe4, 18, 0, },
+};
+
+static void __init hi3519_clk_init(struct device_node *np)
+{
+ struct hisi_clock_data *clk_data;
+
+ clk_data = hisi_clk_init(np, HI3519_NR_CLKS);
+ if (!clk_data)
+ return;
+
+ hisi_reset_init(np, HI3519_NR_RSTS);
+
+ hisi_clk_register_fixed_rate(hi3519_fixed_rate_clks,
+ ARRAY_SIZE(hi3519_fixed_rate_clks),
+ clk_data);
+ hisi_clk_register_mux(hi3519_mux_clks, ARRAY_SIZE(hi3519_mux_clks),
+ clk_data);
+ hisi_clk_register_gate(hi3519_gate_clks,
+ ARRAY_SIZE(hi3519_gate_clks), clk_data);
+}
+
+CLK_OF_DECLARE(hi3519_clk, "hisilicon,hi3519-crg", hi3519_clk_init);
diff --git a/drivers/clk/hisilicon/reset.c b/drivers/clk/hisilicon/reset.c
new file mode 100644
index 0000000..cf5c32a
--- /dev/null
+++ b/drivers/clk/hisilicon/reset.c
@@ -0,0 +1,149 @@
+/*
+ * Hisilicon Reset Controller driver
+ *
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#define HISI_RESET_BIT_SHIFT 0
+#define HISI_RESET_BIT_WIDTH 16
+#define HISI_RESET_OFFSET_SHIFT 16
+#define HISI_RESET_OFFSET_WIDTH 16
+
+struct hisi_reset_controller {
+ spinlock_t lock;
+ void __iomem *membase;
+ struct reset_controller_dev rcdev;
+};
+
+
+#define to_hisi_reset_controller(rcdev) \
+ container_of(rcdev, struct hisi_reset_controller, rcdev)
+
+/*31 16 0
+ * |---reset_spec->args[0]---|---reset_spec->args[1]---|
+ * |-------reg_offset--------|--------reg_bit----------|
+ */
+static int hisi_reset_of_xlate(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec)
+{
+ unsigned int offset, bit, id;
+ const __be32 *addr;
+ u64 size;
+
+ if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
+ return -EINVAL;
+
+ addr = of_get_address(rcdev->of_node, 0, &size, NULL);
+ if (!addr)
+ return -EINVAL;
+
+ if (reset_spec->args[1] >= 32
+ || reset_spec->args[0] + reset_spec->args[1] / 8 > size)
+ return -EINVAL;
+
+ offset = reset_spec->args[0] & (BIT(HISI_RESET_OFFSET_WIDTH) - 1);
+ bit = (reset_spec->args[1] & (BIT(HISI_RESET_BIT_WIDTH) - 1));
+ id = offset << HISI_RESET_OFFSET_SHIFT | bit;
+
+ return id;
+}
+
+static int hisi_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct hisi_reset_controller *rstc = to_hisi_reset_controller(rcdev);
+ unsigned int offset, bit;
+ unsigned long flags;
+ u32 reg;
+
+ offset = id >> HISI_RESET_OFFSET_SHIFT;
+ offset &= (BIT(HISI_RESET_OFFSET_WIDTH) - 1);
+ bit = id & (BIT(HISI_RESET_BIT_WIDTH) - 1);
+
+ spin_lock_irqsave(&rstc->lock, flags);
+
+ reg = readl(rstc->membase + offset);
+ writel(reg | BIT(bit), rstc->membase + offset);
+
+ spin_unlock_irqrestore(&rstc->lock, flags);
+
+ return 0;
+}
+
+static int hisi_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct hisi_reset_controller *rstc = to_hisi_reset_controller(rcdev);
+ unsigned int offset, bit;
+ unsigned long flags;
+ u32 reg;
+
+ offset = id >> HISI_RESET_OFFSET_SHIFT;
+ offset &= (BIT(HISI_RESET_OFFSET_WIDTH) - 1);
+ bit = id & (BIT(HISI_RESET_BIT_WIDTH) - 1);
+
+ spin_lock_irqsave(&rstc->lock, flags);
+
+ reg = readl(rstc->membase + offset);
+ writel(reg & ~BIT(bit), rstc->membase + offset);
+
+ spin_unlock_irqrestore(&rstc->lock, flags);
+
+ return 0;
+}
+
+static struct reset_control_ops hisi_reset_ops = {
+ .assert = hisi_reset_assert,
+ .deassert = hisi_reset_deassert,
+};
+
+int __init hisi_reset_init(struct device_node *np,
+ int nr_rsts)
+{
+ struct hisi_reset_controller *rstc;
+
+ rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
+ if (!rstc)
+ return -ENOMEM;
+
+ rstc->membase = of_iomap(np, 0);
+ if (!rstc->membase)
+ return -EINVAL;
+
+ spin_lock_init(&rstc->lock);
+
+ rstc->rcdev.owner = THIS_MODULE;
+ rstc->rcdev.nr_resets = nr_rsts;
+ rstc->rcdev.ops = &hisi_reset_ops;
+ rstc->rcdev.of_node = np;
+ rstc->rcdev.of_reset_n_cells = 2;
+ rstc->rcdev.of_xlate = hisi_reset_of_xlate;
+
+ return reset_controller_register(&rstc->rcdev);
+}
+
diff --git a/drivers/clk/hisilicon/reset.h b/drivers/clk/hisilicon/reset.h
new file mode 100644
index 0000000..b04796f
--- /dev/null
+++ b/drivers/clk/hisilicon/reset.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __HISI_RESET_H
+#define __HISI_RESET_H
+
+#include <linux/of.h>
+
+#ifdef CONFIG_RESET_CONTROLLER
+int __init hisi_reset_init(struct device_node *np, int nr_rsts);
+#else
+static inline int __init hisi_reset_init(struct device_node *np, int nr_rsts)
+{
+ return 0;
+}
+#endif
+
+#endif /* __HISI_RESET_H */
diff --git a/include/dt-bindings/clock/hi3519-clock.h b/include/dt-bindings/clock/hi3519-clock.h
new file mode 100644
index 0000000..1e4a3c1
--- /dev/null
+++ b/include/dt-bindings/clock/hi3519-clock.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __DTS_HI3519_CLOCK_H
+#define __DTS_HI3519_CLOCK_H
+
+#define HI3519_FIXED_3M 1
+#define HI3519_FMC_CLK 2
+#define HI3519_USB2_BUS_CLK 3
+#define HI3519_USB2_PORT_CLK 4
+#define HI3519_USB3_CLK 5
+#define HI3519_ETH_PHY_CLK 6
+#define HI3519_ETH_MAC_CLK 7
+#define HI3519_ETH_MACIF_CLK 8
+#define HI3519_PWM_CLK 9
+#define HI3519_DMA_CLK 10
+#define HI3519_SPI0_CLK 11
+#define HI3519_SPI1_CLK 12
+#define HI3519_SPI2_CLK 13
+#define HI3519_IR_CLK 14
+#define HI3519_UART0_CLK 15
+#define HI3519_UART1_CLK 16
+#define HI3519_UART2_CLK 17
+#define HI3519_UART3_CLK 18
+#define HI3519_UART4_CLK 19
+
+#define HI3519_EXT_CLKS 19
+
+#endif /* __DTS_HI3519_CLOCK_H */
--
1.9.1
add compatible string for Hi3519 soc.
Signed-off-by: Jiancheng Xue <[email protected]>
---
arch/arm/mach-hisi/hisilicon.c | 23 ++++-------------------
1 file changed, 4 insertions(+), 19 deletions(-)
diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c
index 8cc6215..00dae89 100644
--- a/arch/arm/mach-hisi/hisilicon.c
+++ b/arch/arm/mach-hisi/hisilicon.c
@@ -54,30 +54,15 @@ DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)")
.dt_compat = hi3xxx_compat,
MACHINE_END
-static const char *const hix5hd2_compat[] __initconst = {
+static const char *const hisilicon_compat[] __initconst = {
"hisilicon,hix5hd2",
- NULL,
-};
-
-DT_MACHINE_START(HIX5HD2_DT, "Hisilicon HIX5HD2 (Flattened Device Tree)")
- .dt_compat = hix5hd2_compat,
-MACHINE_END
-
-static const char *const hip04_compat[] __initconst = {
"hisilicon,hip04-d01",
- NULL,
-};
-
-DT_MACHINE_START(HIP04, "Hisilicon HiP04 (Flattened Device Tree)")
- .dt_compat = hip04_compat,
-MACHINE_END
-
-static const char *const hip01_compat[] __initconst = {
"hisilicon,hip01",
"hisilicon,hip01-ca9x2",
+ "hisilicon,hi3519",
NULL,
};
-DT_MACHINE_START(HIP01, "Hisilicon HIP01 (Flattened Device Tree)")
- .dt_compat = hip01_compat,
+DT_MACHINE_START(HISILICON_DT, "HiSilicon Soc")
+ .dt_compat = hisilicon_compat,
MACHINE_END
--
1.9.1
enable CONFIG_RESET_CONTROLLER in hisi_defconfig
Signed-off-by: Jiancheng Xue <[email protected]>
---
arch/arm/configs/hisi_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig
index b2e340b..ba62c07 100644
--- a/arch/arm/configs/hisi_defconfig
+++ b/arch/arm/configs/hisi_defconfig
@@ -75,6 +75,7 @@ CONFIG_DMADEVICES=y
CONFIG_DW_DMAC=y
CONFIG_PL330_DMA=y
CONFIG_PWM=y
+CONFIG_RESET_CONTROLLER=y
CONFIG_PHY_HIX5HD2_SATA=y
CONFIG_EXT4_FS=y
CONFIG_TMPFS=y
--
1.9.1
add hi3519 debug uart.
Signed-off-by: Jiancheng Xue <[email protected]>
---
arch/arm/Kconfig.debug | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 259c0ca..29af057 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -270,6 +270,14 @@ choice
Say Y here if you want the debug print routines to direct
their output to the 8250 at PCI COM1.
+ config DEBUG_HI3519_UART
+ bool "Hisilicon Hi3519 Debug UART"
+ depends on ARCH_HISI
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on HI3519 UART.
+
config DEBUG_HI3620_UART
bool "Hisilicon HI3620 Debug UART"
depends on ARCH_HI3xxx
@@ -1449,6 +1457,7 @@ config DEBUG_UART_PHYS
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8b00000 if DEBUG_HIX5HD2_UART
default 0xf991e000 if DEBUG_QCOM_UARTDM
+ default 0x12100000 if DEBUG_HI3519_UART
default 0xfcb00000 if DEBUG_HI3620_UART
default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfe800000 if ARCH_IOP32X
@@ -1529,6 +1538,7 @@ config DEBUG_UART_VIRT
default 0xfe230000 if DEBUG_PICOXCELL_UART
default 0xfe300000 if DEBUG_BCM_KONA_UART
default 0xfe800000 if ARCH_IOP32X
+ default 0xfef00000 if DEBUG_HI3519_UART
default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
default 0xfeb24000 if DEBUG_RK3X_UART0
default 0xfeb26000 if DEBUG_RK3X_UART1
--
1.9.1
Add device tree bindings for Hi3519 system controller.
Signed-off-by: Jiancheng Xue <[email protected]>
---
Documentation/devicetree/bindings/mfd/hi3519.txt | 14 ++++++++++++++
1 file changed, 14 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/hi3519.txt
diff --git a/Documentation/devicetree/bindings/mfd/hi3519.txt b/Documentation/devicetree/bindings/mfd/hi3519.txt
new file mode 100644
index 0000000..2536edc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hi3519.txt
@@ -0,0 +1,14 @@
+* Hisilicon Hi3519 System Controller Block
+
+This bindings use the following binding:
+Dcumentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: "hisilicon,hi3519-sysctrl".
+- reg: the register region of this block
+
+Examples:
+sysctrl: system-controller@12010000 {
+ compatible = "hisilicon,hi3519-sysctrl", "syscon";
+ reg = <0x12010000 0x1000>;
+};
--
1.9.1
add dts files for Hi3519
Signed-off-by: Jiancheng Xue <[email protected]>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/hi3519-demb.dts | 42 +++++++++
arch/arm/boot/dts/hi3519.dtsi | 175 ++++++++++++++++++++++++++++++++++++++
3 files changed, 219 insertions(+)
create mode 100644 arch/arm/boot/dts/hi3519-demb.dts
create mode 100644 arch/arm/boot/dts/hi3519.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 30bbc37..1ff3ed9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -135,6 +135,8 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5800-peach-pi.dtb
dtb-$(CONFIG_ARCH_HI3xxx) += \
hi3620-hi4511.dtb
+dtb-$(CONFIG_ARCH_HISI) += \
+ hi3519-demb.dtb
dtb-$(CONFIG_ARCH_HIX5HD2) += \
hisi-x5hd2-dkb.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += \
diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hi3519-demb.dts
new file mode 100644
index 0000000..6991ab6
--- /dev/null
+++ b/arch/arm/boot/dts/hi3519-demb.dts
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/dts-v1/;
+#include "hi3519.dtsi"
+
+/ {
+ model = "HiSilicon HI3519 DEMO Board";
+ compatible = "hisilicon,hi3519";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&dual_timer0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi
new file mode 100644
index 0000000..95137c7
--- /dev/null
+++ b/arch/arm/boot/dts/hi3519.dtsi
@@ -0,0 +1,175 @@
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <dt-bindings/clock/hi3519-clock.h>
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0>;
+ };
+ };
+
+ gic: interrupt-controller@10300000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x10301000 0x1000>, <0x10302000 0x1000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+
+ uart0: serial@12100000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12100000 0x1000>;
+ interrupts = <0 4 4>;
+ clocks = <&crg HI3519_UART0_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ uart1: serial@12101000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12101000 0x1000>;
+ interrupts = <0 5 4>;
+ clocks = <&crg HI3519_UART1_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ uart2: serial@12102000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12102000 0x1000>;
+ interrupts = <0 6 4>;
+ clocks = <&crg HI3519_UART2_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ uart3: serial@12103000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12103000 0x1000>;
+ interrupts = <0 7 4>;
+ clocks = <&crg HI3519_UART3_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ uart4: serial@12104000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12104000 0x1000>;
+ interrupts = <0 8 4>;
+ clocks = <&crg HI3519_UART4_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ dual_timer0: timer@12000000 {
+ compatible = "arm,sp804", "arm,primecell";
+ interrupts = <0 64 4>, <0 65 4>;
+ reg = <0x12000000 0x1000>;
+ clocks = <&crg HI3519_FIXED_3M>;
+ status = "disable";
+ };
+
+ dual_timer1: timer@12001000 {
+ compatible = "arm,sp804", "arm,primecell";
+ interrupts = <0 66 4>, <0 67 4>;
+ reg = <0x12001000 0x1000>;
+ clocks = <&crg HI3519_FIXED_3M>;
+ status = "disable";
+ };
+
+ dual_timer2: timer@12002000 {
+ compatible = "arm,sp804", "arm,primecell";
+ interrupts = <0 68 4>, <0 69 4>;
+ reg = <0x12002000 0x1000>;
+ clocks = <&crg HI3519_FIXED_3M>;
+ status = "disable";
+ };
+
+ spi_bus0: spi@12120000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x12120000 0x1000>;
+ interrupts = <0 9 4>;
+ clocks = <&crg HI3519_SPI0_CLK>;
+ clock-names = "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ spi_bus1: spi@12121000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x12121000 0x1000>;
+ interrupts = <0 10 4>;
+ clocks = <&crg HI3519_SPI1_CLK>;
+ clock-names = "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ spi_bus2: spi@12122000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x12122000 0x1000>;
+ interrupts = <0 11 4>;
+ clocks = <&crg HI3519_SPI2_CLK>;
+ clock-names = "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
+ sysctrl: system-controller@12020000 {
+ compatible = "hisilicon,hi3519-sysctrl", "syscon";
+ reg = <0x12020000 0x1000>;
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&sysctrl>;
+ offset = <0x4>;
+ mask = <0xdeadbeef>;
+ };
+
+ crg: clock-reset-controller@12010000 {
+ compatible = "hisilicon,hi3519-crg";
+ #clock-cells = <1>;
+ #reset-cells = <2>;
+ reg = <0x12010000 0x10000>;
+ };
+ };
+};
--
1.9.1
Hello Jiancheng Xue,
Quoting Jiancheng Xue (2015-12-29 17:43:47)
> The CRG(Clock and Reset Generator) block provides clock
> and reset signals for other modules in hi3519 soc.
>
> Signed-off-by: Jiancheng Xue <[email protected]>
> ---
> .../devicetree/bindings/clock/hi3519-crg.txt | 46 +++++++
> drivers/clk/hisilicon/Kconfig | 7 +
> drivers/clk/hisilicon/Makefile | 2 +
> drivers/clk/hisilicon/clk-hi3519.c | 103 ++++++++++++++
> drivers/clk/hisilicon/reset.c | 149 +++++++++++++++++++++
> drivers/clk/hisilicon/reset.h | 32 +++++
> include/dt-bindings/clock/hi3519-clock.h | 43 ++++++
> 7 files changed, 382 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/hi3519-crg.txt
> create mode 100644 drivers/clk/hisilicon/clk-hi3519.c
> create mode 100644 drivers/clk/hisilicon/reset.c
> create mode 100644 drivers/clk/hisilicon/reset.h
> create mode 100644 include/dt-bindings/clock/hi3519-clock.h
Please keep Philipp Zabel Cc'd for reset-related patches. I've added
him to Cc.
>
> diff --git a/Documentation/devicetree/bindings/clock/hi3519-crg.txt b/Documentation/devicetree/bindings/clock/hi3519-crg.txt
> new file mode 100644
> index 0000000..2d23950
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/hi3519-crg.txt
> @@ -0,0 +1,46 @@
> +* Hisilicon Hi3519 Clock and Reset Generator(CRG)
> +
> +The Hi3519 CRG module provides clock and reset signals to various
> +controllers within the SoC.
> +
> +This binding uses the following bindings:
> + Documentation/devicetree/bindings/clock/clock-bindings.txt
> + Documentation/devicetree/bindings/reset/reset.txt
> +
> +Required Properties:
> +
> +- compatible: should be one of the following.
> + - "hisilicon,hi3519-crg" - controller compatible with Hi3519 SoC.
> +
> +- reg: physical base address of the controller and length of memory mapped
> + region.
> +
> +- #clock-cells: should be 1.
> +
> +Each clock is assigned an identifier and client nodes use this identifier
> +to specify the clock which they consume.
> +
> +All these identifier could be found in <dt-bindings/clock/hi3519-clock.h>.
> +
> +- #reset-cells: should be 2.
> +
> +A reset signal can be controlled by writing a bit register in the CRG module.
> +The reset specifier consists of two cells. The first cell represents the
> +register offset relative to the base address. The second cell represents the
> +bit index in the register.
> +
> +Example: CRG nodes
> +CRG: clock-reset-controller@12010000 {
> + compatible = "hisilicon,hi3519-crg";
> + reg = <0x12010000 0x10000>;
> + #clock-cells = <1>;
> + #reset-cells = <2>;
> +};
> +
> +Example: consumer nodes
> +i2c0: i2c@12110000 {
> + compatible = "hisilicon,hi3519-i2c";
> + reg = <0x12110000 0x1000>;
> + clocks = <&CRG HI3519_I2C0_RST>;*/
> + resets = <&CRG 0xe4 0>;
> +};
> diff --git a/drivers/clk/hisilicon/Kconfig b/drivers/clk/hisilicon/Kconfig
> index e434854..b6baebf 100644
> --- a/drivers/clk/hisilicon/Kconfig
> +++ b/drivers/clk/hisilicon/Kconfig
> @@ -1,3 +1,10 @@
> +config COMMON_CLK_HI3519
> + tristate "Clock Driver for Hi3519"
> + depends on ARCH_HISI
> + default y
> + help
> + Build the clock driver for hi3519.
> +
> config COMMON_CLK_HI6220
> bool "Hi6220 Clock Driver"
> depends on ARCH_HISI || COMPILE_TEST
> diff --git a/drivers/clk/hisilicon/Makefile b/drivers/clk/hisilicon/Makefile
> index 74dba31..3f57b09 100644
> --- a/drivers/clk/hisilicon/Makefile
> +++ b/drivers/clk/hisilicon/Makefile
> @@ -4,8 +4,10 @@
>
> obj-y += clk.o clkgate-separated.o clkdivider-hi6220.o
>
> +obj-$(CONFIG_RESET_CONTROLLER) += reset.o
> obj-$(CONFIG_ARCH_HI3xxx) += clk-hi3620.o
> obj-$(CONFIG_ARCH_HIP04) += clk-hip04.o
> obj-$(CONFIG_ARCH_HIX5HD2) += clk-hix5hd2.o
> obj-$(CONFIG_COMMON_CLK_HI6220) += clk-hi6220.o
> obj-$(CONFIG_STUB_CLK_HI6220) += clk-hi6220-stub.o
> +obj-$(CONFIG_COMMON_CLK_HI3519) += clk-hi3519.o
> diff --git a/drivers/clk/hisilicon/clk-hi3519.c b/drivers/clk/hisilicon/clk-hi3519.c
> new file mode 100644
> index 0000000..e220234
> --- /dev/null
> +++ b/drivers/clk/hisilicon/clk-hi3519.c
> @@ -0,0 +1,103 @@
> +/*
> + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/of_address.h>
> +#include <dt-bindings/clock/hi3519-clock.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include "clk.h"
> +#include "reset.h"
> +
> +#define HI3519_FIXED_24M (HI3519_EXT_CLKS + 1)
> +#define HI3519_FIXED_50M (HI3519_EXT_CLKS + 2)
> +#define HI3519_FIXED_75M (HI3519_EXT_CLKS + 3)
> +#define HI3519_FIXED_125M (HI3519_EXT_CLKS + 4)
> +#define HI3519_FIXED_150M (HI3519_EXT_CLKS + 5)
> +#define HI3519_FIXED_200M (HI3519_EXT_CLKS + 6)
> +#define HI3519_FIXED_250M (HI3519_EXT_CLKS + 7)
> +#define HI3519_FIXED_300M (HI3519_EXT_CLKS + 8)
> +#define HI3519_FIXED_400M (HI3519_EXT_CLKS + 9)
> +#define HI3519_FMC_MUX (HI3519_EXT_CLKS + 10)
> +
> +#define HI3519_NR_CLKS 128
> +#define HI3519_NR_RSTS 128
> +
> +static struct hisi_fixed_rate_clock hi3519_fixed_rate_clks[] __initdata = {
> + { HI3519_FIXED_3M, "3m", NULL, CLK_IS_ROOT, 3000000, },
> + { HI3519_FIXED_24M, "24m", NULL, CLK_IS_ROOT, 24000000, },
> + { HI3519_FIXED_50M, "50m", NULL, CLK_IS_ROOT, 50000000, },
> + { HI3519_FIXED_75M, "75m", NULL, CLK_IS_ROOT, 75000000, },
> + { HI3519_FIXED_125M, "125m", NULL, CLK_IS_ROOT, 125000000, },
> + { HI3519_FIXED_150M, "150m", NULL, CLK_IS_ROOT, 150000000, },
> + { HI3519_FIXED_200M, "200m", NULL, CLK_IS_ROOT, 200000000, },
> + { HI3519_FIXED_250M, "250m", NULL, CLK_IS_ROOT, 250000000, },
> + { HI3519_FIXED_300M, "300m", NULL, CLK_IS_ROOT, 300000000, },
> + { HI3519_FIXED_400M, "400m", NULL, CLK_IS_ROOT, 400000000, },
> +};
> +
> +static const char *fmc_mux_p[] __initconst = {
> + "24m", "75m", "125m", "150m", "200m", "250m", "300m", "400m", };
> +static u32 fmc_mux_table[] = {0, 1, 2, 3, 4, 5, 6, 7};
> +
> +static struct hisi_mux_clock hi3519_mux_clks[] __initdata = {
> + { HI3519_FMC_MUX, "fmc_mux", fmc_mux_p, ARRAY_SIZE(fmc_mux_p),
> + CLK_SET_RATE_PARENT, 0xc0, 2, 3, 0, fmc_mux_table, },
> +};
> +
> +static struct hisi_gate_clock hi3519_gate_clks[] __initdata = {
> + /* fmc */
> + { HI3519_FMC_CLK, "clk_fmc", "fmc_mux",
> + CLK_SET_RATE_PARENT, 0xc0, 1, 0, },
> + /* uart */
> + { HI3519_UART0_CLK, "clk_uart0", "24m",
> + CLK_SET_RATE_PARENT, 0xe4, 20, 0, },
> + { HI3519_UART1_CLK, "clk_uart1", "24m",
> + CLK_SET_RATE_PARENT, 0xe4, 21, 0, },
> + { HI3519_UART2_CLK, "clk_uart2", "24m",
> + CLK_SET_RATE_PARENT, 0xe4, 22, 0, },
> + { HI3519_UART3_CLK, "clk_uart3", "24m",
> + CLK_SET_RATE_PARENT, 0xe4, 23, 0, },
> + { HI3519_UART4_CLK, "clk_uart4", "24m",
> + CLK_SET_RATE_PARENT, 0xe4, 24, 0, },
> + { HI3519_SPI0_CLK, "clk_spi0", "50m",
> + CLK_SET_RATE_PARENT, 0xe4, 16, 0, },
> + { HI3519_SPI1_CLK, "clk_spi1", "50m",
> + CLK_SET_RATE_PARENT, 0xe4, 17, 0, },
> + { HI3519_SPI2_CLK, "clk_spi2", "50m",
> + CLK_SET_RATE_PARENT, 0xe4, 18, 0, },
> +};
> +
> +static void __init hi3519_clk_init(struct device_node *np)
> +{
> + struct hisi_clock_data *clk_data;
> +
> + clk_data = hisi_clk_init(np, HI3519_NR_CLKS);
> + if (!clk_data)
> + return;
> +
> + hisi_reset_init(np, HI3519_NR_RSTS);
> +
> + hisi_clk_register_fixed_rate(hi3519_fixed_rate_clks,
> + ARRAY_SIZE(hi3519_fixed_rate_clks),
> + clk_data);
> + hisi_clk_register_mux(hi3519_mux_clks, ARRAY_SIZE(hi3519_mux_clks),
> + clk_data);
> + hisi_clk_register_gate(hi3519_gate_clks,
> + ARRAY_SIZE(hi3519_gate_clks), clk_data);
> +}
> +
> +CLK_OF_DECLARE(hi3519_clk, "hisilicon,hi3519-crg", hi3519_clk_init);
Is CLK_OF_DECLARE required here? Why do you need to register these
clocks so early?
Can this be a real platform driver instead? See,
grep platform_driver drivers/clk/qcom/*.c
Regards,
Mike
> diff --git a/drivers/clk/hisilicon/reset.c b/drivers/clk/hisilicon/reset.c
> new file mode 100644
> index 0000000..cf5c32a
> --- /dev/null
> +++ b/drivers/clk/hisilicon/reset.c
> @@ -0,0 +1,149 @@
> +/*
> + * Hisilicon Reset Controller driver
> + *
> + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/types.h>
> +
> +#define HISI_RESET_BIT_SHIFT 0
> +#define HISI_RESET_BIT_WIDTH 16
> +#define HISI_RESET_OFFSET_SHIFT 16
> +#define HISI_RESET_OFFSET_WIDTH 16
> +
> +struct hisi_reset_controller {
> + spinlock_t lock;
> + void __iomem *membase;
> + struct reset_controller_dev rcdev;
> +};
> +
> +
> +#define to_hisi_reset_controller(rcdev) \
> + container_of(rcdev, struct hisi_reset_controller, rcdev)
> +
> +/*31 16 0
> + * |---reset_spec->args[0]---|---reset_spec->args[1]---|
> + * |-------reg_offset--------|--------reg_bit----------|
> + */
> +static int hisi_reset_of_xlate(struct reset_controller_dev *rcdev,
> + const struct of_phandle_args *reset_spec)
> +{
> + unsigned int offset, bit, id;
> + const __be32 *addr;
> + u64 size;
> +
> + if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
> + return -EINVAL;
> +
> + addr = of_get_address(rcdev->of_node, 0, &size, NULL);
> + if (!addr)
> + return -EINVAL;
> +
> + if (reset_spec->args[1] >= 32
> + || reset_spec->args[0] + reset_spec->args[1] / 8 > size)
> + return -EINVAL;
> +
> + offset = reset_spec->args[0] & (BIT(HISI_RESET_OFFSET_WIDTH) - 1);
> + bit = (reset_spec->args[1] & (BIT(HISI_RESET_BIT_WIDTH) - 1));
> + id = offset << HISI_RESET_OFFSET_SHIFT | bit;
> +
> + return id;
> +}
> +
> +static int hisi_reset_assert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct hisi_reset_controller *rstc = to_hisi_reset_controller(rcdev);
> + unsigned int offset, bit;
> + unsigned long flags;
> + u32 reg;
> +
> + offset = id >> HISI_RESET_OFFSET_SHIFT;
> + offset &= (BIT(HISI_RESET_OFFSET_WIDTH) - 1);
> + bit = id & (BIT(HISI_RESET_BIT_WIDTH) - 1);
> +
> + spin_lock_irqsave(&rstc->lock, flags);
> +
> + reg = readl(rstc->membase + offset);
> + writel(reg | BIT(bit), rstc->membase + offset);
> +
> + spin_unlock_irqrestore(&rstc->lock, flags);
> +
> + return 0;
> +}
> +
> +static int hisi_reset_deassert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct hisi_reset_controller *rstc = to_hisi_reset_controller(rcdev);
> + unsigned int offset, bit;
> + unsigned long flags;
> + u32 reg;
> +
> + offset = id >> HISI_RESET_OFFSET_SHIFT;
> + offset &= (BIT(HISI_RESET_OFFSET_WIDTH) - 1);
> + bit = id & (BIT(HISI_RESET_BIT_WIDTH) - 1);
> +
> + spin_lock_irqsave(&rstc->lock, flags);
> +
> + reg = readl(rstc->membase + offset);
> + writel(reg & ~BIT(bit), rstc->membase + offset);
> +
> + spin_unlock_irqrestore(&rstc->lock, flags);
> +
> + return 0;
> +}
> +
> +static struct reset_control_ops hisi_reset_ops = {
> + .assert = hisi_reset_assert,
> + .deassert = hisi_reset_deassert,
> +};
> +
> +int __init hisi_reset_init(struct device_node *np,
> + int nr_rsts)
> +{
> + struct hisi_reset_controller *rstc;
> +
> + rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
> + if (!rstc)
> + return -ENOMEM;
> +
> + rstc->membase = of_iomap(np, 0);
> + if (!rstc->membase)
> + return -EINVAL;
> +
> + spin_lock_init(&rstc->lock);
> +
> + rstc->rcdev.owner = THIS_MODULE;
> + rstc->rcdev.nr_resets = nr_rsts;
> + rstc->rcdev.ops = &hisi_reset_ops;
> + rstc->rcdev.of_node = np;
> + rstc->rcdev.of_reset_n_cells = 2;
> + rstc->rcdev.of_xlate = hisi_reset_of_xlate;
> +
> + return reset_controller_register(&rstc->rcdev);
> +}
> +
> diff --git a/drivers/clk/hisilicon/reset.h b/drivers/clk/hisilicon/reset.h
> new file mode 100644
> index 0000000..b04796f
> --- /dev/null
> +++ b/drivers/clk/hisilicon/reset.h
> @@ -0,0 +1,32 @@
> +/*
> + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __HISI_RESET_H
> +#define __HISI_RESET_H
> +
> +#include <linux/of.h>
> +
> +#ifdef CONFIG_RESET_CONTROLLER
> +int __init hisi_reset_init(struct device_node *np, int nr_rsts);
> +#else
> +static inline int __init hisi_reset_init(struct device_node *np, int nr_rsts)
> +{
> + return 0;
> +}
> +#endif
> +
> +#endif /* __HISI_RESET_H */
> diff --git a/include/dt-bindings/clock/hi3519-clock.h b/include/dt-bindings/clock/hi3519-clock.h
> new file mode 100644
> index 0000000..1e4a3c1
> --- /dev/null
> +++ b/include/dt-bindings/clock/hi3519-clock.h
> @@ -0,0 +1,43 @@
> +/*
> + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __DTS_HI3519_CLOCK_H
> +#define __DTS_HI3519_CLOCK_H
> +
> +#define HI3519_FIXED_3M 1
> +#define HI3519_FMC_CLK 2
> +#define HI3519_USB2_BUS_CLK 3
> +#define HI3519_USB2_PORT_CLK 4
> +#define HI3519_USB3_CLK 5
> +#define HI3519_ETH_PHY_CLK 6
> +#define HI3519_ETH_MAC_CLK 7
> +#define HI3519_ETH_MACIF_CLK 8
> +#define HI3519_PWM_CLK 9
> +#define HI3519_DMA_CLK 10
> +#define HI3519_SPI0_CLK 11
> +#define HI3519_SPI1_CLK 12
> +#define HI3519_SPI2_CLK 13
> +#define HI3519_IR_CLK 14
> +#define HI3519_UART0_CLK 15
> +#define HI3519_UART1_CLK 16
> +#define HI3519_UART2_CLK 17
> +#define HI3519_UART3_CLK 18
> +#define HI3519_UART4_CLK 19
> +
> +#define HI3519_EXT_CLKS 19
> +
> +#endif /* __DTS_HI3519_CLOCK_H */
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
On Wed, Dec 30, 2015 at 09:43:47AM +0800, Jiancheng Xue wrote:
> The CRG(Clock and Reset Generator) block provides clock
> and reset signals for other modules in hi3519 soc.
>
> Signed-off-by: Jiancheng Xue <[email protected]>
> ---
> .../devicetree/bindings/clock/hi3519-crg.txt | 46 +++++++
For the binding:
Acked-by: Rob Herring <[email protected]>
On Wed, Dec 30, 2015 at 09:43:51AM +0800, Jiancheng Xue wrote:
> Add device tree bindings for Hi3519 system controller.
>
> Signed-off-by: Jiancheng Xue <[email protected]>
> ---
> Documentation/devicetree/bindings/mfd/hi3519.txt | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/hi3519.txt
Acked-by: Rob Herring <[email protected]>