Add IC, SI and SIRAM document of QE to
Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
Signed-off-by: Zhao Qiang <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
changes for v2
- Add interrupt-controller in Required properties
- delete address-cells and size-cells for qe-si and qe-siram
Changes for v3
- Add SoC specific caompatible strings to qe-si and qe-siram
Changes for v4
- NA
.../devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt | 50 ++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
index 4f89302..7ab21cb 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
@@ -69,6 +69,56 @@ Example:
};
};
+* Interrupt Controller (IC)
+
+Required properties:
+- compatible : should be "fsl,qe-ic".
+- reg : Address range of IC register set.
+- interrupts : interrupts generated by the device.
+- interrupt-controller : this device is a interrupt controller.
+
+Example:
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78
+ };
+
+* Serial Interface Block (SI)
+
+The SI manages the routing of eight TDM lines to the QE block serial drivers
+, the MCC and the UCCs, for receive and transmit.
+
+Required properties:
+- compatible : should be "fsl,t1040-qe-si".
+- reg : Address range of SI register set.
+
+Example:
+
+ si1: si@700 {
+ compatible = "fsl,t1040-qe-si";
+ reg = <0x700 0x80>;
+ };
+
+* Serial Interface Block RAM(SIRAM)
+
+store the routing entries of SI
+
+Required properties:
+- compatible : should be "fsl,t1040-qe-siram".
+- reg : Address range of SI RAM.
+
+Example:
+
+ siram1: siram@1000 {
+ compatible = "fsl,t1040-qe-siram";
+ reg = <0x1000 0x800>;
+ };
+
* QE Firmware Node
This node defines a firmware binary that is embedded in the device tree, for
--
2.1.0.27.g96db324
Add ucc hdlc document to
Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/network.txt
Signed-off-by: Zhao Qiang <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
Changes for v2
- use ucc-hdlc instead of ucc_hdlc
- add more information to properties.
Changes for v3
- use fsl,tx-timeslot-mask instead of fsl,tx-timeslot
- use fsl,rx-timeslot-mask instead of fsl,rx-timeslot
- add more info
Changes for v4
- NA
.../bindings/powerpc/fsl/cpm_qe/network.txt | 81 ++++++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/network.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/network.txt
index 29b28b8..03c7416 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/network.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/network.txt
@@ -41,3 +41,84 @@ Example:
fsl,mdio-pin = <12>;
fsl,mdc-pin = <13>;
};
+
+* HDLC
+
+Currently defined compatibles:
+- fsl,ucc-hdlc
+
+Properties for fsl,ucc-hdlc:
+- rx-clock-name
+- tx-clock-name
+ Usage: required
+ Value type: <string>
+ Definition : Must be "brg1"-"brg16" for internal clock source,
+ Must be "clk1"-"clk24" for external clock source.
+
+- fsl,tdm-interface
+ Usage: optional
+ Value type: <empty>
+ Definition : Specify that hdlc is based on tdm-interface
+
+The property below is dependent on fsl,tdm-interface:
+- fsl,rx-sync-clock
+ Usage: required
+ Value type: <string>
+ Definition : Must be "none", "rsync_pin", "brg9-11" and "brg13-15".
+
+- fsl,tx-sync-clock
+ Usage: required
+ Value type: <string>
+ Definition : Must be "none", "tsync_pin", "brg9-11" and "brg13-15".
+
+- fsl,tdm-framer-type
+ Usage: required for tdm interface
+ Value type: <string>
+ Definition : "e1" or "t1".Now e1 and t1 are used, other framer types
+ are not supported.
+
+- fsl,tdm-id
+ Usage: required for tdm interface
+ Value type: <u32>
+ Definition : number of TDM ID
+
+- fsl,tx-timeslot-mask
+- fsl,rx-timeslot-mask
+ Usage: required for tdm interface
+ Value type: <u32>
+ Definition : time slot mask for TDM operation. Indicates which time
+ slots used for transmitting and receiving.
+
+- fsl,siram-entry-id
+ Usage: required for tdm interface
+ Value type: <u32>
+ Definition : Must be 0,2,4...64. the number of TDM entry.
+
+- fsl,tdm-internal-loopback
+ usage: optional for tdm interface
+ value type: <empty>
+ Definition : Internal loopback connecting on TDM layer.
+
+Example for tdm interface:
+
+ ucc@2000 {
+ compatible = "fsl,ucc-hdlc";
+ rx-clock-name = "clk8";
+ tx-clock-name = "clk9";
+ fsl,rx-sync-clock = "rsync_pin";
+ fsl,tx-sync-clock = "tsync_pin";
+ fsl,tx-timeslot-mask = <0xfffffffe>;
+ fsl,rx-timeslot-mask = <0xfffffffe>;
+ fsl,tdm-framer-type = "e1";
+ fsl,tdm-id = <0>;
+ fsl,siram-entry-id = <0>;
+ fsl,tdm-interface;
+ };
+
+Example for hdlc without tdm interface:
+
+ ucc@2000 {
+ compatible = "fsl,ucc-hdlc";
+ rx-clock-name = "brg1";
+ tx-clock-name = "brg1";
+ };
--
2.1.0.27.g96db324
Add uqe_serial document to
Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
Signed-off-by: Zhao Qiang <[email protected]>
---
Changes for v2
- modify tx/rx-clock-name specification
Changes for v3
- NA
Changes for v4
- drop device_type
- modify to SoC specific compatible
.../bindings/powerpc/fsl/cpm_qe/uqe_serial.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
new file mode 100644
index 0000000..c2de8ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
@@ -0,0 +1,18 @@
+* Serial
+
+Currently defined compatibles:
+- t1040-ucc-uart
+
+Properties for t1040-ucc-uart:
+port-number : port number of UCC-UART
+tx/rx-clock-name : should be "brg1"-"brg16" for internal clock source,
+ should be "clk1"-"clk28" for external clock source.
+
+Example:
+
+ ucc_serial: ucc@2200 {
+ compatible = "t1040-ucc-uart";
+ port-number = <0>;
+ rx-clock-name = "brg2";
+ tx-clock-name = "brg2";
+ };
--
2.1.0.27.g96db324
cpm_qe is supported on both powerpc and arm.
and the QE code has been moved from arch/powerpc into
drivers/soc/fsl, so move cpm_qe binding from powerpc/fsl
to soc/fsl
Signed-off-by: Zhao Qiang <[email protected]>
Acked-by: Rob Herring<[email protected]>
---
Changes for v3
- NA
Changes for v4
- NA
Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/cpm.txt | 0
Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/cpm/brg.txt | 0
Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/cpm/i2c.txt | 0
Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/cpm/pic.txt | 0
Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/cpm/usb.txt | 0
Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/gpio.txt | 0
Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/network.txt | 0
Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/qe.txt | 0
.../devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/qe/firmware.txt | 0
.../devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/qe/par_io.txt | 0
.../devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/qe/pincfg.txt | 0
Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/qe/ucc.txt | 0
Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/qe/usb.txt | 0
Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/serial.txt | 0
.../devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/uqe_serial.txt | 0
15 files changed, 0 insertions(+), 0 deletions(-)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/cpm.txt (100%)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/cpm/brg.txt (100%)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/cpm/i2c.txt (100%)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/cpm/pic.txt (100%)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/cpm/usb.txt (100%)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/gpio.txt (100%)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/network.txt (100%)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/qe.txt (100%)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/qe/firmware.txt (100%)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/qe/par_io.txt (100%)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/qe/pincfg.txt (100%)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/qe/ucc.txt (100%)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/qe/usb.txt (100%)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/serial.txt (100%)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/cpm_qe/uqe_serial.txt (100%)
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/brg.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/brg.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/brg.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/brg.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/i2c.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/i2c.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/i2c.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/i2c.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/pic.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/pic.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/pic.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/pic.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/usb.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/usb.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/usb.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/usb.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/gpio.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/gpio.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/network.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/network.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/firmware.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/firmware.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/firmware.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/firmware.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/par_io.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/par_io.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/pincfg.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/pincfg.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/ucc.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/ucc.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/usb.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/usb.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/serial.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/serial.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/serial.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/serial.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/uqe_serial.txt
similarity index 100%
rename from Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt
rename to Documentation/devicetree/bindings/soc/fsl/cpm_qe/uqe_serial.txt
--
2.1.0.27.g96db324
Drop device type and modify compatible to SoC specific compatible.
Signed-off-by: Zhao Qiang <[email protected]>
---
drivers/tty/serial/ucc_uart.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 1a7dc3c..ff6c1ab 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1475,8 +1475,7 @@ static int ucc_uart_remove(struct platform_device *ofdev)
static const struct of_device_id ucc_uart_match[] = {
{
- .type = "serial",
- .compatible = "ucc_uart",
+ .compatible = "t1040-ucc-uart",
},
{},
};
--
2.1.0.27.g96db324
add qe node to t104xrdb.dtsi
Signed-off-by: Zhao Qiang <[email protected]>
---
Changes for v2
- rebase
Changes for v3
- rebase
Changes for v4
- rebase
arch/powerpc/boot/dts/fsl/t104xrdb.dtsi | 38 +++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
index 830ea48..dd7fc2b 100644
--- a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
@@ -186,4 +186,42 @@
0 0x00010000>;
};
};
+
+ qe: qe@ffe140000 {
+ ranges = <0x0 0xf 0xfe140000 0x40000>;
+ reg = <0xf 0xfe140000 0 0x480>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+
+ si1: si@700 {
+ compatible = "fsl,t1040-qe-si";
+ reg = <0x700 0x80>;
+ };
+
+ siram1: siram@1000 {
+ compatible = "fsl,t1040-qe-siram";
+ reg = <0x1000 0x800>;
+ };
+
+ ucc_hdlc: ucc@2000 {
+ compatible = "fsl,ucc-hdlc";
+ rx-clock-name = "clk8";
+ tx-clock-name = "clk9";
+ fsl,rx-sync-clock = "rsync_pin";
+ fsl,tx-sync-clock = "tsync_pin";
+ fsl,tx-timeslot-mask = <0xfffffffe>;
+ fsl,rx-timeslot-mask = <0xfffffffe>;
+ fsl,tdm-framer-type = "e1";
+ fsl,tdm-id = <0>;
+ fsl,siram-entry-id = <0>;
+ fsl,tdm-interface;
+ };
+
+ ucc_serial: ucc@2200 {
+ compatible = "t1040-ucc-uart";
+ port-number = <0>;
+ rx-clock-name = "brg2";
+ tx-clock-name = "brg2";
+ };
+ };
};
--
2.1.0.27.g96db324
add qe node to t104xqds.dtsi
Signed-off-by: Zhao Qiang <[email protected]>
---
Changes for v2
- rebase
Changes for v3
- rebase
Changes for v4
- rebase
arch/powerpc/boot/dts/fsl/t104xqds.dtsi | 38 +++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/powerpc/boot/dts/fsl/t104xqds.dtsi b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
index 1498d1e..8e72041 100644
--- a/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
@@ -190,4 +190,42 @@
0 0x00010000>;
};
};
+
+ qe: qe@ffe140000 {
+ ranges = <0x0 0xf 0xfe140000 0x40000>;
+ reg = <0xf 0xfe140000 0 0x480>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+
+ si1: si@700 {
+ compatible = "fsl,t1040-qe-si";
+ reg = <0x700 0x80>;
+ };
+
+ siram1: siram@1000 {
+ compatible = "fsl,t1040-qe-siram";
+ reg = <0x1000 0x800>;
+ };
+
+ ucc_hdlc: ucc@2000 {
+ compatible = "fsl,ucc-hdlc";
+ rx-clock-name = "clk8";
+ tx-clock-name = "clk9";
+ fsl,rx-sync-clock = "rsync_pin";
+ fsl,tx-sync-clock = "tsync_pin";
+ fsl,tx-timeslot-mask = <0xfffffffe>;
+ fsl,rx-timeslot-mask = <0xfffffffe>;
+ fsl,tdm-framer-type = "e1";
+ fsl,tdm-id = <0>;
+ fsl,siram-entry-id = <0>;
+ fsl,tdm-interface;
+ };
+
+ ucc_serial: ucc@2200 {
+ compatible = "t1040-ucc-uart";
+ port-number = <0>;
+ rx-clock-name = "brg2";
+ tx-clock-name = "brg2";
+ };
+ };
};
--
2.1.0.27.g96db324
add qe node to t104xd4rdb.dtsi and t1040si-post.dtsi.
Signed-off-by: Zhao Qiang <[email protected]>
---
Changes for v2
- rebase
Changes for v3
- rebase
Changes for v4
- rebase
arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 45 +++++++++++++++++++++++++++++
arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi | 38 ++++++++++++++++++++++++
2 files changed, 83 insertions(+)
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index e0f4da5..012f813 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -673,3 +673,48 @@
};
};
};
+
+&qe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2200 {
+ cell-index = <3>;
+ reg = <0x2200 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x6000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x6000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
index 3f6d7c6..41ed3a6 100644
--- a/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
@@ -212,4 +212,42 @@
0 0x00010000>;
};
};
+
+ qe: qe@ffe140000 {
+ ranges = <0x0 0xf 0xfe140000 0x40000>;
+ reg = <0xf 0xfe140000 0 0x480>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+
+ si1: si@700 {
+ compatible = "fsl,t1040-qe-si";
+ reg = <0x700 0x80>;
+ };
+
+ siram1: siram@1000 {
+ compatible = "fsl,t1040-qe-siram";
+ reg = <0x1000 0x800>;
+ };
+
+ ucc_hdlc: ucc@2000 {
+ compatible = "fsl,ucc-hdlc";
+ rx-clock-name = "clk8";
+ tx-clock-name = "clk9";
+ fsl,rx-sync-clock = "rsync_pin";
+ fsl,tx-sync-clock = "tsync_pin";
+ fsl,tx-timeslot-mask = <0xfffffffe>;
+ fsl,rx-timeslot-mask = <0xfffffffe>;
+ fsl,tdm-framer-type = "e1";
+ fsl,tdm-id = <0>;
+ fsl,siram-entry-id = <0>;
+ fsl,tdm-interface;
+ };
+
+ ucc_serial: ucc@2200 {
+ compatible = "t1040-ucc-uart";
+ port-number = <0>;
+ rx-clock-name = "brg2";
+ tx-clock-name = "brg2";
+ };
+ };
};
--
2.1.0.27.g96db324