2016-03-10 14:28:24

by Aaron Conole

[permalink] [raw]
Subject: [RFC -next 0/2] virtio-net: Advised MTU feature

The following series adds the ability for a hypervisor to set an MTU on the
guest during feature negotiation phase. This is useful for VM orchestration
when, for instance, tunneling is involved and the MTU of the various systems
should be homogenous.

The first patch adds the feature bit as described in the proposed VFIO spec
addition found at
https://lists.oasis-open.org/archives/virtio-dev/201603/msg00001.html

The second patch adds a user of the bit, and a warning when the guest changes
the MTU from the hypervisor advised MTU. Future patches may add more thorough
error handling.

Aaron Conole (2):
virtio: Start the advised MTU feature support
virtio_net: Read and use the advised MTU

drivers/net/virtio_net.c | 15 ++++++++++++++-
include/uapi/linux/virtio_net.h | 3 +++
2 files changed, 17 insertions(+), 1 deletion(-)

--
2.5.0


2016-03-10 14:28:37

by Aaron Conole

[permalink] [raw]
Subject: [RFC -next 2/2] virtio_net: Read and use the advised MTU

This patch checks the feature bit for the VIRTIO_NET_F_MTU feature. If it
exists, read the advised MTU and use it.

No proper error handling is provided for the case where a user changes the
negotiated MTU. A future commit will add proper error handling. Instead, a
warning is emitted if the guest changes the device MTU after previously being
given advice.

Signed-off-by: Aaron Conole <[email protected]>
---
drivers/net/virtio_net.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 767ab11..7175563 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -146,6 +146,7 @@ struct virtnet_info {
virtio_net_ctrl_ack ctrl_status;
u8 ctrl_promisc;
u8 ctrl_allmulti;
+ bool negotiated_mtu;
};

struct padded_vnet_hdr {
@@ -1390,8 +1391,12 @@ static const struct ethtool_ops virtnet_ethtool_ops = {

static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
{
+ struct virtnet_info *vi = netdev_priv(dev);
if (new_mtu < MIN_MTU || new_mtu > MAX_MTU)
return -EINVAL;
+ if (vi->negotiated_mtu == true) {
+ pr_warn("changing mtu from negotiated mtu.");
+ }
dev->mtu = new_mtu;
return 0;
}
@@ -1836,6 +1841,13 @@ static int virtnet_probe(struct virtio_device *vdev)
if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ))
vi->has_cvq = true;

+ if (virtio_has_feature(vdev, VIRTIO_NET_F_MTU)) {
+ vi->negotiated_mtu = true;
+ dev->mtu = virtio_cread16(vdev,
+ offsetof(struct virtio_net_config,
+ mtu));
+ }
+
if (vi->any_header_sg)
dev->needed_headroom = vi->hdr_len;

@@ -2017,8 +2029,9 @@ static unsigned int features[] = {
VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ,
- VIRTIO_NET_F_CTRL_MAC_ADDR,
+ VIRTIO_NET_F_CTRL_MAC_ADDR,
VIRTIO_F_ANY_LAYOUT,
+ VIRTIO_NET_F_MTU,
};

static struct virtio_driver virtio_net_driver = {
--
2.5.0

2016-03-10 14:28:46

by Aaron Conole

[permalink] [raw]
Subject: [RFC -next 1/2] virtio: Start the advised MTU feature support

This commit adds the feature bit and associated mtu device entry for the
virtio network device. Future commits will make use of these bits to support
negotiated MTU.

Signed-off-by: Aaron Conole <[email protected]>
---
include/uapi/linux/virtio_net.h | 3 +++
1 file changed, 3 insertions(+)

diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
index ec32293..41a6a01 100644
--- a/include/uapi/linux/virtio_net.h
+++ b/include/uapi/linux/virtio_net.h
@@ -55,6 +55,7 @@
#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow
* Steering */
#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
+#define VIRTIO_NET_F_MTU 25 /* Device supports Default MTU Negotiation */

#ifndef VIRTIO_NET_NO_LEGACY
#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
@@ -73,6 +74,8 @@ struct virtio_net_config {
* Legal values are between 1 and 0x8000
*/
__u16 max_virtqueue_pairs;
+ /* Default maximum transmit unit advice */
+ __u16 mtu;
} __attribute__((packed));

/*
--
2.5.0

2016-03-10 14:57:33

by Paolo Abeni

[permalink] [raw]
Subject: Re: [RFC -next 2/2] virtio_net: Read and use the advised MTU

On Thu, 2016-03-10 at 09:28 -0500, Aaron Conole wrote:
> This patch checks the feature bit for the VIRTIO_NET_F_MTU feature. If it
> exists, read the advised MTU and use it.
>
> No proper error handling is provided for the case where a user changes the
> negotiated MTU. A future commit will add proper error handling. Instead, a
> warning is emitted if the guest changes the device MTU after previously being
> given advice.
>
> Signed-off-by: Aaron Conole <[email protected]>
> ---
> drivers/net/virtio_net.c | 15 ++++++++++++++-
> 1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index 767ab11..7175563 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -146,6 +146,7 @@ struct virtnet_info {
> virtio_net_ctrl_ack ctrl_status;
> u8 ctrl_promisc;
> u8 ctrl_allmulti;
> + bool negotiated_mtu;
> };
>
> struct padded_vnet_hdr {
> @@ -1390,8 +1391,12 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
>
> static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
> {
> + struct virtnet_info *vi = netdev_priv(dev);
> if (new_mtu < MIN_MTU || new_mtu > MAX_MTU)
> return -EINVAL;
> + if (vi->negotiated_mtu == true) {

why don't:

if ((vi->negotiated_mtu == true) && (dev->mtu != new_mtu))

?

> + pr_warn("changing mtu from negotiated mtu.");
> + }
> dev->mtu = new_mtu;
> return 0;
> }
> @@ -1836,6 +1841,13 @@ static int virtnet_probe(struct virtio_device *vdev)
> if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ))
> vi->has_cvq = true;
>
> + if (virtio_has_feature(vdev, VIRTIO_NET_F_MTU)) {
> + vi->negotiated_mtu = true;
> + dev->mtu = virtio_cread16(vdev,
> + offsetof(struct virtio_net_config,
> + mtu));
> + }
> +
> if (vi->any_header_sg)
> dev->needed_headroom = vi->hdr_len;
>
> @@ -2017,8 +2029,9 @@ static unsigned int features[] = {
> VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
> VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
> VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ,
> - VIRTIO_NET_F_CTRL_MAC_ADDR,
> + VIRTIO_NET_F_CTRL_MAC_ADDR,

Here a trailing white space slipped-in.

Otherwise LGTM.

Paolo

> VIRTIO_F_ANY_LAYOUT,
> + VIRTIO_NET_F_MTU,
> };
>
> static struct virtio_driver virtio_net_driver = {


2016-03-10 18:57:06

by Sergei Shtylyov

[permalink] [raw]
Subject: Re: [RFC -next 2/2] virtio_net: Read and use the advised MTU

Hello.

On 03/10/2016 05:28 PM, Aaron Conole wrote:

> This patch checks the feature bit for the VIRTIO_NET_F_MTU feature. If it
> exists, read the advised MTU and use it.
>
> No proper error handling is provided for the case where a user changes the
> negotiated MTU. A future commit will add proper error handling. Instead, a
> warning is emitted if the guest changes the device MTU after previously being
> given advice.
>
> Signed-off-by: Aaron Conole <[email protected]>
> ---
> drivers/net/virtio_net.c | 15 ++++++++++++++-
> 1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index 767ab11..7175563 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
[...]
> @@ -1390,8 +1391,12 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
>
> static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
> {
> + struct virtnet_info *vi = netdev_priv(dev);
> if (new_mtu < MIN_MTU || new_mtu > MAX_MTU)
> return -EINVAL;
> + if (vi->negotiated_mtu == true) {
> + pr_warn("changing mtu from negotiated mtu.");
> + }

{} not needed, see Documentation/CodingStyle.

[...]

MBR, Sergei

2016-03-15 20:52:46

by Aaron Conole

[permalink] [raw]
Subject: Re: [RFC -next 2/2] virtio_net: Read and use the advised MTU

Paolo Abeni <[email protected]> writes:

> On Thu, 2016-03-10 at 09:28 -0500, Aaron Conole wrote:
>> This patch checks the feature bit for the VIRTIO_NET_F_MTU feature. If it
>> exists, read the advised MTU and use it.
>>
>> No proper error handling is provided for the case where a user changes the
>> negotiated MTU. A future commit will add proper error handling. Instead, a
>> warning is emitted if the guest changes the device MTU after previously being
>> given advice.
>>
>> Signed-off-by: Aaron Conole <[email protected]>
>> ---
>> drivers/net/virtio_net.c | 15 ++++++++++++++-
>> 1 file changed, 14 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
>> index 767ab11..7175563 100644
>> --- a/drivers/net/virtio_net.c
>> +++ b/drivers/net/virtio_net.c
>> @@ -146,6 +146,7 @@ struct virtnet_info {
>> virtio_net_ctrl_ack ctrl_status;
>> u8 ctrl_promisc;
>> u8 ctrl_allmulti;
>> + bool negotiated_mtu;
>> };
>>
>> struct padded_vnet_hdr {
>> @@ -1390,8 +1391,12 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
>>
>> static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
>> {
>> + struct virtnet_info *vi = netdev_priv(dev);
>> if (new_mtu < MIN_MTU || new_mtu > MAX_MTU)
>> return -EINVAL;
>> + if (vi->negotiated_mtu == true) {
>
> why don't:
>
> if ((vi->negotiated_mtu == true) && (dev->mtu != new_mtu))
>
> ?

Okay, I'll put this test in.

>> + pr_warn("changing mtu from negotiated mtu.");
>> + }
>> dev->mtu = new_mtu;
>> return 0;
>> }
>> @@ -1836,6 +1841,13 @@ static int virtnet_probe(struct virtio_device *vdev)
>> if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ))
>> vi->has_cvq = true;
>>
>> + if (virtio_has_feature(vdev, VIRTIO_NET_F_MTU)) {
>> + vi->negotiated_mtu = true;
>> + dev->mtu = virtio_cread16(vdev,
>> + offsetof(struct virtio_net_config,
>> + mtu));
>> + }
>> +
>> if (vi->any_header_sg)
>> dev->needed_headroom = vi->hdr_len;
>>
>> @@ -2017,8 +2029,9 @@ static unsigned int features[] = {
>> VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
>> VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
>> VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ,
>> - VIRTIO_NET_F_CTRL_MAC_ADDR,
>> + VIRTIO_NET_F_CTRL_MAC_ADDR,
>
> Here a trailing white space slipped-in.
>
> Otherwise LGTM.
>
> Paolo

D'oh! Okay, v2 will have this fixed.

>> VIRTIO_F_ANY_LAYOUT,
>> + VIRTIO_NET_F_MTU,
>> };
>>
>> static struct virtio_driver virtio_net_driver = {

Thanks so much for the review, Paolo!

-Aaron

2016-03-15 20:53:29

by Aaron Conole

[permalink] [raw]
Subject: Re: [RFC -next 2/2] virtio_net: Read and use the advised MTU

Sergei Shtylyov <[email protected]> writes:

> Hello.

Hi Sergei,

> On 03/10/2016 05:28 PM, Aaron Conole wrote:
>
>> This patch checks the feature bit for the VIRTIO_NET_F_MTU feature. If it
>> exists, read the advised MTU and use it.
>>
>> No proper error handling is provided for the case where a user changes the
>> negotiated MTU. A future commit will add proper error handling. Instead, a
>> warning is emitted if the guest changes the device MTU after previously being
>> given advice.
>>
>> Signed-off-by: Aaron Conole <[email protected]>
>> ---
>> drivers/net/virtio_net.c | 15 ++++++++++++++-
>> 1 file changed, 14 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
>> index 767ab11..7175563 100644
>> --- a/drivers/net/virtio_net.c
>> +++ b/drivers/net/virtio_net.c
> [...]
>> @@ -1390,8 +1391,12 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
>>
>> static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
>> {
>> + struct virtnet_info *vi = netdev_priv(dev);
>> if (new_mtu < MIN_MTU || new_mtu > MAX_MTU)
>> return -EINVAL;
>> + if (vi->negotiated_mtu == true) {
>> + pr_warn("changing mtu from negotiated mtu.");
>> + }
>
> {} not needed, see Documentation/CodingStyle.

Okay, I'll make sure to fix this with v2.

> [...]
>
> MBR, Sergei

Thanks so much for the review!

-Aaron