For pcie nic, after setting link speed and there is no link driver does not need
to do phy reset until link up.
For some pcie nics, to do this will also reset phy speed down counter and prevent
phy from auto speed down.
This patch fix the issue reported in following link.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1547151
Signed-off-by: Chunhao Lin <[email protected]>
---
drivers/net/ethernet/realtek/r8169.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index dd2cf37..94f08f1 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -1999,7 +1999,8 @@ static int rtl8169_set_speed(struct net_device *dev,
goto out;
if (netif_running(dev) && (autoneg == AUTONEG_ENABLE) &&
- (advertising & ADVERTISED_1000baseT_Full)) {
+ (advertising & ADVERTISED_1000baseT_Full) &&
+ !pci_is_pcie(tp->pci_dev)) {
mod_timer(&tp->timer, jiffies + RTL8169_PHY_TIMEOUT);
}
out:
--
1.9.1
From: Chunhao Lin <[email protected]>
Date: Fri, 11 Mar 2016 14:21:14 +0800
> For pcie nic, after setting link speed and there is no link driver does not need
> to do phy reset until link up.
>
> For some pcie nics, to do this will also reset phy speed down counter and prevent
> phy from auto speed down.
>
> This patch fix the issue reported in following link.
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1547151
>
> Signed-off-by: Chunhao Lin <[email protected]>
Applied, thanks.