2016-03-23 22:06:23

by Matthew McClintock

[permalink] [raw]
Subject: [PATCH 17/17] qcom: ipq4019: add DMA nodes to ipq4019 SoC and DK01 device tree

This adds the blsp_dma node to the device tree and the required
properties for using DMA with serial

Signed-off-by: Matthew McClintock <[email protected]>
---
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 4 ++++
arch/arm/boot/dts/qcom-ipq4019.dtsi | 15 +++++++++++++++
2 files changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index 2c347ad..b9457dd2 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -72,6 +72,10 @@
};
};

+ blsp_dma: dma@7884000 {
+ status = "ok";
+ };
+
spi_0: spi@78b5000 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 3cd42c0..5c08d19 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -123,6 +123,17 @@
interrupts = <0 208 0>;
};

+ blsp_dma: dma@7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07884000 0x23000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ status = "disabled";
+ };
+
spi_0: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x78b5000 0x600>;
@@ -224,6 +235,8 @@
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp_dma 1>, <&blsp_dma 0>;
+ dma-names = "rx", "tx";
};

serial@78b0000 {
@@ -234,6 +247,8 @@
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp_dma 3>, <&blsp_dma 2>;
+ dma-names = "rx", "tx";
};

watchdog@b017000 {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project