2016-03-31 08:58:37

by Jisheng Zhang

[permalink] [raw]
Subject: [PATCH v2] net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with cache_line_size

The mvneta is also used in some Marvell berlin family SoCs which may
have different cacheline size. Replace the MVNETA_CPU_D_CACHE_LINE_SIZE
usage with cache_line_size().

And since dma_alloc_coherent() is always cacheline size aligned, so
remove the align checks.

Signed-off-by: Jisheng Zhang <[email protected]>
---
Since v1:
- use cache_line_size() suggested by Marcin

drivers/net/ethernet/marvell/mvneta.c | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 577f7ca..b1db000 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -260,7 +260,6 @@

#define MVNETA_VLAN_TAG_LEN 4

-#define MVNETA_CPU_D_CACHE_LINE_SIZE 32
#define MVNETA_TX_CSUM_DEF_SIZE 1600
#define MVNETA_TX_CSUM_MAX_SIZE 9800
#define MVNETA_ACC_MODE_EXT1 1
@@ -300,7 +299,7 @@
#define MVNETA_RX_PKT_SIZE(mtu) \
ALIGN((mtu) + MVNETA_MH_SIZE + MVNETA_VLAN_TAG_LEN + \
ETH_HLEN + ETH_FCS_LEN, \
- MVNETA_CPU_D_CACHE_LINE_SIZE)
+ cache_line_size())

#define IS_TSO_HEADER(txq, addr) \
((addr >= txq->tso_hdrs_phys) && \
@@ -2764,9 +2763,6 @@ static int mvneta_rxq_init(struct mvneta_port *pp,
if (rxq->descs == NULL)
return -ENOMEM;

- BUG_ON(rxq->descs !=
- PTR_ALIGN(rxq->descs, MVNETA_CPU_D_CACHE_LINE_SIZE));
-
rxq->last_desc = rxq->size - 1;

/* Set Rx descriptors queue starting address */
@@ -2837,10 +2833,6 @@ static int mvneta_txq_init(struct mvneta_port *pp,
if (txq->descs == NULL)
return -ENOMEM;

- /* Make sure descriptor address is cache line size aligned */
- BUG_ON(txq->descs !=
- PTR_ALIGN(txq->descs, MVNETA_CPU_D_CACHE_LINE_SIZE));
-
txq->last_desc = txq->size - 1;

/* Set maximum bandwidth for enabled TXQs */
--
2.8.0.rc3