From: Raja Mani <[email protected]>
Include dts support for two wifi block present on ipq4019 SoC.
Corresponding dt binding documentation has been added in ath.git as below
commit id a47aaa69 and the commit message is
"dt: bindings: add new dt entry for pre calibration in qcom, ath10k.txt".
Signed-off-by: Raja Mani <[email protected]>
Signed-off-by: Tamizh chelvam <[email protected]>
---
v2:
- Fixed Commit log
- Added new Signed off
arch/arm/boot/dts/qcom-ipq4019.dtsi | 98 +++++++++++++++++++++++++++++++++++
1 file changed, 98 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index b486859..80bbe02 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -379,5 +379,103 @@
compatible = "qcom,pshold";
reg = <0x4ab000 0x4>;
};
+
+ wifi0: wifi@a000000 {
+ compatible = "qcom,ipq4019-wifi";
+ reg = <0xa000000 0x200000>;
+ resets = <&gcc WIFI0_CPU_INIT_RESET>,
+ <&gcc WIFI0_RADIO_SRIF_RESET>,
+ <&gcc WIFI0_RADIO_WARM_RESET>,
+ <&gcc WIFI0_RADIO_COLD_RESET>,
+ <&gcc WIFI0_CORE_WARM_RESET>,
+ <&gcc WIFI0_CORE_COLD_RESET>;
+ reset-names = "wifi_cpu_init",
+ "wifi_radio_srif",
+ "wifi_radio_warm",
+ "wifi_radio_cold",
+ "wifi_core_warm",
+ "wifi_core_cold";
+ clocks = <&gcc GCC_WCSS2G_CLK>,
+ <&gcc GCC_WCSS2G_REF_CLK>,
+ <&gcc GCC_WCSS2G_RTC_CLK>;
+ clock-names = "wifi_wcss_cmd",
+ "wifi_wcss_ref",
+ "wifi_wcss_rtc";
+ interrupts = <0 0x20 0x1>,
+ <0 0x21 0x1>,
+ <0 0x22 0x1>,
+ <0 0x23 0x1>,
+ <0 0x24 0x1>,
+ <0 0x25 0x1>,
+ <0 0x26 0x1>,
+ <0 0x27 0x1>,
+ <0 0x28 0x1>,
+ <0 0x29 0x1>,
+ <0 0x2a 0x1>,
+ <0 0x2b 0x1>,
+ <0 0x2c 0x1>,
+ <0 0x2d 0x1>,
+ <0 0x2e 0x1>,
+ <0 0x2f 0x1>,
+ <0 0xa8 0x0>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7",
+ "msi8", "msi9", "msi10", "msi11",
+ "msi12", "msi13", "msi14", "msi15",
+ "legacy";
+ status = "disabled";
+ qcom,msi_addr = <0x0b006040>;
+ qcom,msi_base = <0x40>;
+ qcom,ath10k-pre-calibration-data = [00];
+ };
+
+ wifi1: wifi@a800000 {
+ compatible = "qcom,ipq4019-wifi";
+ reg = <0xa800000 0x200000>;
+ resets = <&gcc WIFI1_CPU_INIT_RESET>,
+ <&gcc WIFI1_RADIO_SRIF_RESET>,
+ <&gcc WIFI1_RADIO_WARM_RESET>,
+ <&gcc WIFI1_RADIO_COLD_RESET>,
+ <&gcc WIFI1_CORE_WARM_RESET>,
+ <&gcc WIFI1_CORE_COLD_RESET>;
+ reset-names = "wifi_cpu_init",
+ "wifi_radio_srif",
+ "wifi_radio_warm",
+ "wifi_radio_cold",
+ "wifi_core_warm",
+ "wifi_core_cold";
+ clocks = <&gcc GCC_WCSS5G_CLK>,
+ <&gcc GCC_WCSS5G_REF_CLK>,
+ <&gcc GCC_WCSS5G_RTC_CLK>;
+ clock-names = "wifi_wcss_cmd",
+ "wifi_wcss_ref",
+ "wifi_wcss_rtc";
+ interrupts = <0 0x30 0x1>,
+ <0 0x31 0x1>,
+ <0 0x32 0x1>,
+ <0 0x33 0x1>,
+ <0 0x34 0x1>,
+ <0 0x35 0x1>,
+ <0 0x36 0x1>,
+ <0 0x37 0x1>,
+ <0 0x38 0x1>,
+ <0 0x39 0x1>,
+ <0 0x3a 0x1>,
+ <0 0x3b 0x1>,
+ <0 0x3c 0x1>,
+ <0 0x3d 0x1>,
+ <0 0x3e 0x1>,
+ <0 0x3f 0x1>,
+ <0 0xa9 0x0>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7",
+ "msi8", "msi9", "msi10", "msi11",
+ "msi12", "msi13", "msi14", "msi15",
+ "legacy";
+ status = "disabled";
+ qcom,msi_addr = <0x0b006040>;
+ qcom,msi_base = <0x50>;
+ qcom,ath10k-pre-calibration-data = [00];
+ };
};
};
--
1.7.9.5
On 04/11/2016 09:18 PM, [email protected] wrote:
> + qcom,msi_addr = <0x0b006040>;
> + qcom,msi_base = <0x50>;
Are these properties used? I couldn't find any usage in the driver but I
may have missed it.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
On 2016-04-13 23:26, Stephen Boyd wrote:
> On 04/11/2016 09:18 PM, [email protected] wrote:
>> + qcom,msi_addr = <0x0b006040>;
>> + qcom,msi_base = <0x50>;
>
> Are these properties used? I couldn't find any usage in the driver but
> I
> may have missed it.
As of now it is not used in the driver. But it will be needed in the
future to enable msi in ipq4019 platform.
Thanks,
Tamizh.