If i2c_dw_probe() fail, we should disable and unprepare the clk,
otherwise the clk enable and prepare is left unbalanced.
In dw_i2c_plat_remove(), we'd better to rely on rpm to disable
and unprepare the clk since CONFIG_PM may be disabled when configuring
the kernel. So we explicitly disable and unprepare the clk in
dw_i2c_plat_remove().
Signed-off-by: Jisheng Zhang <[email protected]>
---
drivers/i2c/busses/i2c-designware-platdrv.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index d656657..9f1bc94 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -253,8 +253,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
}
r = i2c_dw_probe(dev);
- if (r && !dev->pm_runtime_disabled)
- pm_runtime_disable(&pdev->dev);
+ if (r) {
+ i2c_dw_plat_prepare_clk(dev, false);
+ if (!dev->pm_runtime_disabled)
+ pm_runtime_disable(&pdev->dev);
+ }
return r;
}
@@ -264,15 +267,16 @@ static int dw_i2c_plat_remove(struct platform_device *pdev)
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
pm_runtime_get_sync(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ if (!dev->pm_runtime_disabled)
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
i2c_del_adapter(&dev->adapter);
i2c_dw_disable(dev);
- pm_runtime_dont_use_autosuspend(&pdev->dev);
- pm_runtime_put_sync(&pdev->dev);
- if (!dev->pm_runtime_disabled)
- pm_runtime_disable(&pdev->dev);
+ i2c_dw_plat_prepare_clk(dev, false);
return 0;
}
--
2.8.1