The qla1280 driver sets the scsi_host_template's can_queue field to 0xfffff
which results in an allocation failure when allocating the block layer tags
for the driver's queues like the one shown below:
[ 4.804166] scsi host0: QLogic QLA1040 PCI to SCSI Host Adapter Firmware version: 7.65.06, Driver version 3.27.1
[ 4.804174] ------------[ cut here ]------------
[ 4.804184] WARNING: CPU: 2 PID: 305 at mm/page_alloc.c:2989 alloc_pages_nodemask+0xae8/0xbc0()
[ 4.804186] Modules linked in: amdkfd amd_iommu_v2 radeon i2c_algo_bit m_kms_helper ttm drm megaraid_sas serio_raw 8021q garp bnx2 stp llc mrp nhme qla1280(+) fjes
[ 4.804208] CPU: 2 PID: 305 Comm: systemd-udevd Not tainted 4.6-201.fc22.x86_64 #1
[ 4.804210] Hardware name: Google Enterprise Search Appliance/0DT021, OS 1.1.2 08/14/2006
[ 4.804212] 0000000000000286 000000002f01064c ffff88042985b710 ffffff813b542e
[ 4.804216] 0000000000000000 ffffffff81a75024 ffff88042985b748 ffffff810a40f2
[ 4.804220] 0000000000000000 0000000000000000 000000000000000b 00000000000000
[ 4.804223] Call Trace:
[ 4.804231] [<ffffffff813b542e>] dump_stack+0x63/0x85
[ 4.804236] [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0
[ 4.804239] [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20
[ 4.804242] [<ffffffff811b75e8>] __alloc_pages_nodemask+0xae8/0xbc0
[ 4.804247] [<ffffffff817a002e>] ? _raw_spin_unlock_irqrestore+0xe/0x10
[ 4.804251] [<ffffffff811908be>] ? irq_work_queue+0x8e/0xa0
[ 4.804256] [<ffffffff810fa10a>] ? console_unlock+0x20a/0x540
[ 4.804262] [<ffffffff812029cc>] alloc_pages_current+0x8c/0x110
[ 4.804265] [<ffffffff811b5159>] alloc_kmem_pages+0x19/0x90
[ 4.804268] [<ffffffff811d2efe>] kmalloc_order_trace+0x2e/0xe0
[ 4.804272] [<ffffffff8120e6d2>] __kmalloc+0x232/0x260
[ 4.804277] [<ffffffff8138990d>] init_tag_map+0x3d/0xc0
[ 4.804290] [<ffffffff813899d5>] __blk_queue_init_tags+0x45/0x80
[ 4.804293] [<ffffffff81389a24>] blk_init_tags+0x14/0x20
[ 4.804298] [<ffffffff81520e60>] scsi_add_host_with_dma+0x80/0x300
[ 4.804305] [<ffffffffa000fec3>] qla1280_probe_one+0x683/0x9ef [qla1280]
[ 4.804309] [<ffffffff81401115>] local_pci_probe+0x45/0xa0
[ 4.804312] [<ffffffff814024fd>] pci_device_probe+0xfd/0x140
[ 4.804316] [<ffffffff814ef1d2>] driver_probe_device+0x222/0x490
[ 4.804319] [<ffffffff814ef4c4>] __driver_attach+0x84/0x90
[ 4.804321] [<ffffffff814ef440>] ? driver_probe_device+0x490/0x490
[ 4.804324] [<ffffffff814eccac>] bus_for_each_dev+0x6c/0xc0
[ 4.804326] [<ffffffff814ee98e>] driver_attach+0x1e/0x20
[ 4.804328] [<ffffffff814ee4cb>] bus_add_driver+0x1eb/0x280
[ 4.804331] [<ffffffffa0015000>] ? 0xffffffffa0015000
[ 4.804333] [<ffffffff814efd80>] driver_register+0x60/0xe0
[ 4.804336] [<ffffffff81400a5c>] __pci_register_driver+0x4c/0x50
[ 4.804339] [<ffffffffa00151ce>] qla1280_init+0x1ce/0x1000 [qla1280]
[ 4.804341] [<ffffffffa0015000>] ? 0xffffffffa0015000
[ 4.804345] [<ffffffff81002123>] do_one_initcall+0xb3/0x200
[ 4.804348] [<ffffffff8120d086>] ? kmem_cache_alloc_trace+0x196/0x210
[ 4.804352] [<ffffffff811aba7e>] ? do_init_module+0x27/0x1cb
[ 4.804354] [<ffffffff811abab6>] do_init_module+0x5f/0x1cb
[ 4.804358] [<ffffffff8112a6e0>] load_module+0x2040/0x2680
[ 4.804360] [<ffffffff81126e40>] ? __symbol_put+0x60/0x60
[ 4.804363] [<ffffffff8112ae69>] SYSC_init_module+0x149/0x190
[ 4.804366] [<ffffffff8112af9e>] SyS_init_module+0xe/0x10
[ 4.804369] [<ffffffff817a05ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 4.804371] ---[ end trace 0ea3b625f86705f7 ]---
[ 4.804581] qla1280: probe of 0000:11:04.0 failed with error -12
In qla1280_set_defaults() the maximum queue depth is
set to 32 so adopt the scsi_host_template to it as well.
Signed-off-by: Johannes Thumshirn <[email protected]>
Fixes: 64d513ac31b - "scsi: use host wide tags by default"
Cc: Laura Abbott <[email protected]>
Cc: Michael Reed <[email protected]>
Cc: [email protected]
Reviewed-by: Laurence Oberman <[email protected]>
---
drivers/scsi/qla1280.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 5d0ec42..3d3d5d8 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -410,6 +410,7 @@
#define IS_ISP1x160(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP10160 || \
ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP12160)
+#define QLA1280_QUEUE_DEPTH 32
static int qla1280_probe_one(struct pci_dev *, const struct pci_device_id *);
static void qla1280_remove_one(struct pci_dev *);
@@ -2080,7 +2081,7 @@ qla1280_set_defaults(struct scsi_qla_host *ha)
nv->bus[bus].config_2.req_ack_active_negation = 1;
nv->bus[bus].config_2.data_line_active_negation = 1;
nv->bus[bus].selection_timeout = 250;
- nv->bus[bus].max_queue_depth = 32;
+ nv->bus[bus].max_queue_depth = QLA1280_QUEUE_DEPTH;
if (IS_ISP1040(ha)) {
nv->bus[bus].bus_reset_delay = 3;
@@ -4214,7 +4215,7 @@ static struct scsi_host_template qla1280_driver_template = {
.eh_bus_reset_handler = qla1280_eh_bus_reset,
.eh_host_reset_handler = qla1280_eh_adapter_reset,
.bios_param = qla1280_biosparam,
- .can_queue = 0xfffff,
+ .can_queue = QLA1280_QUEUE_DEPTH,
.this_id = -1,
.sg_tablesize = SG_ALL,
.use_clustering = ENABLE_CLUSTERING,
--
2.8.1
On Fri, 2016-04-22 at 16:41 +0200, Johannes Thumshirn wrote:
> The qla1280 driver sets the scsi_host_template's can_queue field to
> 0xfffff which results in an allocation failure when allocating the
> block layer tags for the driver's queues like the one shown below:
>
> [ 4.804166] scsi host0: QLogic QLA1040 PCI to SCSI Host Adapter
> Firmware version: 7.65.06, Driver version 3.27.1
> [ 4.804174] ------------[ cut here ]------------
> [ 4.804184] WARNING: CPU: 2 PID: 305 at mm/page_alloc.c:2989
> alloc_pages_nodemask+0xae8/0xbc0()
> [ 4.804186] Modules linked in: amdkfd amd_iommu_v2 radeon
> i2c_algo_bit m_kms_helper ttm drm megaraid_sas serio_raw 8021q garp
> bnx2 stp llc mrp nhme qla1280(+) fjes
> [ 4.804208] CPU: 2 PID: 305 Comm: systemd-udevd Not tainted 4.6
> -201.fc22.x86_64 #1
> [ 4.804210] Hardware name: Google Enterprise Search
> Appliance/0DT021, OS 1.1.2 08/14/2006
> [ 4.804212] 0000000000000286 000000002f01064c ffff88042985b710
> ffffff813b542e
> [ 4.804216] 0000000000000000 ffffffff81a75024 ffff88042985b748
> ffffff810a40f2
> [ 4.804220] 0000000000000000 0000000000000000 000000000000000b
> 00000000000000
> [ 4.804223] Call Trace:
> [ 4.804231] [<ffffffff813b542e>] dump_stack+0x63/0x85
> [ 4.804236] [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0
> [ 4.804239] [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20
> [ 4.804242] [<ffffffff811b75e8>]
> __alloc_pages_nodemask+0xae8/0xbc0
> [ 4.804247] [<ffffffff817a002e>] ?
> _raw_spin_unlock_irqrestore+0xe/0x10
> [ 4.804251] [<ffffffff811908be>] ? irq_work_queue+0x8e/0xa0
> [ 4.804256] [<ffffffff810fa10a>] ? console_unlock+0x20a/0x540
> [ 4.804262] [<ffffffff812029cc>] alloc_pages_current+0x8c/0x110
> [ 4.804265] [<ffffffff811b5159>] alloc_kmem_pages+0x19/0x90
> [ 4.804268] [<ffffffff811d2efe>] kmalloc_order_trace+0x2e/0xe0
> [ 4.804272] [<ffffffff8120e6d2>] __kmalloc+0x232/0x260
> [ 4.804277] [<ffffffff8138990d>] init_tag_map+0x3d/0xc0
> [ 4.804290] [<ffffffff813899d5>] __blk_queue_init_tags+0x45/0x80
> [ 4.804293] [<ffffffff81389a24>] blk_init_tags+0x14/0x20
> [ 4.804298] [<ffffffff81520e60>]
> scsi_add_host_with_dma+0x80/0x300
> [ 4.804305] [<ffffffffa000fec3>] qla1280_probe_one+0x683/0x9ef
> [qla1280]
> [ 4.804309] [<ffffffff81401115>] local_pci_probe+0x45/0xa0
> [ 4.804312] [<ffffffff814024fd>] pci_device_probe+0xfd/0x140
> [ 4.804316] [<ffffffff814ef1d2>] driver_probe_device+0x222/0x490
> [ 4.804319] [<ffffffff814ef4c4>] __driver_attach+0x84/0x90
> [ 4.804321] [<ffffffff814ef440>] ?
> driver_probe_device+0x490/0x490
> [ 4.804324] [<ffffffff814eccac>] bus_for_each_dev+0x6c/0xc0
> [ 4.804326] [<ffffffff814ee98e>] driver_attach+0x1e/0x20
> [ 4.804328] [<ffffffff814ee4cb>] bus_add_driver+0x1eb/0x280
> [ 4.804331] [<ffffffffa0015000>] ? 0xffffffffa0015000
> [ 4.804333] [<ffffffff814efd80>] driver_register+0x60/0xe0
> [ 4.804336] [<ffffffff81400a5c>] __pci_register_driver+0x4c/0x50
> [ 4.804339] [<ffffffffa00151ce>] qla1280_init+0x1ce/0x1000
> [qla1280]
> [ 4.804341] [<ffffffffa0015000>] ? 0xffffffffa0015000
> [ 4.804345] [<ffffffff81002123>] do_one_initcall+0xb3/0x200
> [ 4.804348] [<ffffffff8120d086>] ?
> kmem_cache_alloc_trace+0x196/0x210
> [ 4.804352] [<ffffffff811aba7e>] ? do_init_module+0x27/0x1cb
> [ 4.804354] [<ffffffff811abab6>] do_init_module+0x5f/0x1cb
> [ 4.804358] [<ffffffff8112a6e0>] load_module+0x2040/0x2680
> [ 4.804360] [<ffffffff81126e40>] ? __symbol_put+0x60/0x60
> [ 4.804363] [<ffffffff8112ae69>] SYSC_init_module+0x149/0x190
> [ 4.804366] [<ffffffff8112af9e>] SyS_init_module+0xe/0x10
> [ 4.804369] [<ffffffff817a05ae>]
> entry_SYSCALL_64_fastpath+0x12/0x71
> [ 4.804371] ---[ end trace 0ea3b625f86705f7 ]---
> [ 4.804581] qla1280: probe of 0000:11:04.0 failed with error -12
>
> In qla1280_set_defaults() the maximum queue depth is
> set to 32 so adopt the scsi_host_template to it as well.
Actually, this isn't right. You're confusing the maximum number of
outstanding commands per host with the per device queue depth. For a
single device system, what you've done is fine but in an active
multiple device one, we'll start to starve the queues.
If we inject reality a bit, I think 32 is way too high a queue depth
for SPI devices, so that could come down a bit, but if we stick with it
and say the max number of attached devices was probably around 8 (or 16
in the maximal case), we should be setting can_queue to 256-512.
James