RK3399 and RK3288 shared the same eDP IP controller, only some light
difference with VOP configure and GRF configure.
Also same misc fix to analogix_dp driver:
- Hotplug invalid which report by Dan Carpenter
- Make panel detect to an optional action
- correct the register bit define error in ANALOGIX_DP_PLL_REG_1
Yakir Yang (8):
drm: bridge: analogix_dp: rename RK3288_DP to ROCKCHIP_DP
drm: rockchip: analogix_dp: split the lcdc select setting into device
data
drm/rockchip: analogix_dp: add rk3399 eDP support
drm: bridge: analogix_dp: correct the register bit define error in
ANALOGIX_DP_PLL_REG_1
drm/rockchip: analogix_dp: make panel detect to an optional action
drm/bridge: analogix_dp: introduce connector mode_valid callback to
plat driver
drm: rockchip: analogix_dp: correct the connector display color format
and bpc
drm: bridge: analogix/dp: fix no drm hpd event when panel plug in
.../bindings/display/bridge/analogix_dp.txt | 1 +
.../display/rockchip/analogix_dp-rockchip.txt | 2 +-
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 19 ++-
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 8 +-
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 6 +-
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 4 +-
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 149 +++++++++++++++------
include/drm/bridge/analogix_dp.h | 6 +-
8 files changed, 140 insertions(+), 55 deletions(-)
--
1.9.1
Rename RK3288_DP marcos to ROCKCHIP_DP, prepare to add eDP
support for more Rockchip chips.
Signed-off-by: Yakir Yang <[email protected]>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 4 ++--
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 6 +++---
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 2 +-
include/drm/bridge/analogix_dp.h | 2 +-
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 7699597..4a1b3b8 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1207,9 +1207,9 @@ static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
struct video_info *video_info = &dp->video_info;
switch (dp->plat_data->dev_type) {
- case RK3288_DP:
+ case ROCKCHIP_DP:
/*
- * Like Rk3288 DisplayPort TRM indicate that "Main link
+ * Like Rockchip DisplayPort TRM indicate that "Main link
* containing 4 physical lanes of 2.7/1.62 Gbps/lane".
*/
video_info->max_link_rate = 0x0A;
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 49205ef..931a76c 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -74,7 +74,7 @@ void analogix_dp_init_analog_param(struct analogix_dp_device *dp)
reg = SEL_24M | TX_DVDD_BIT_1_0625V;
writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
- if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP)) {
+ if (dp->plat_data && (dp->plat_data->dev_type == ROCKCHIP_DP)) {
writel(REF_CLK_24M, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
writel(0x95, dp->reg_base + ANALOGIX_DP_PLL_REG_2);
writel(0x40, dp->reg_base + ANALOGIX_DP_PLL_REG_3);
@@ -244,7 +244,7 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
u32 reg;
u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
- if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+ if (dp->plat_data && (dp->plat_data->dev_type == ROCKCHIP_DP))
phy_pd_addr = ANALOGIX_DP_PD;
switch (block) {
@@ -448,7 +448,7 @@ void analogix_dp_init_aux(struct analogix_dp_device *dp)
analogix_dp_reset_aux(dp);
/* Disable AUX transaction H/W retry */
- if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+ if (dp->plat_data && (dp->plat_data->dev_type == ROCKCHIP_DP))
reg = AUX_BIT_PERIOD_EXPECTED_DELAY(0) |
AUX_HW_RETRY_COUNT_SEL(3) |
AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index a1d94d8..6dc1b9b 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -264,7 +264,7 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
dp->plat_data.encoder = &dp->encoder;
- dp->plat_data.dev_type = RK3288_DP;
+ dp->plat_data.dev_type = ROCKCHIP_DP;
dp->plat_data.power_on = rockchip_dp_poweron;
dp->plat_data.power_off = rockchip_dp_powerdown;
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 25afb31..9e5d013 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -15,7 +15,7 @@
enum analogix_dp_devtype {
EXYNOS_DP,
- RK3288_DP,
+ ROCKCHIP_DP,
};
struct analogix_dp_plat_data {
--
1.9.1
RK3399 and RK3288 shared the same eDP IP controller, only some light
difference with VOP configure and GRF configure.
Signed-off-by: Yakir Yang <[email protected]>
---
.../bindings/display/bridge/analogix_dp.txt | 1 +
.../display/rockchip/analogix_dp-rockchip.txt | 2 +-
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 45 +++++++++++++++++++---
3 files changed, 41 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 4f2ba8c..4a0f4f7 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -5,6 +5,7 @@ Required properties for dp-controller:
platform specific such as:
* "samsung,exynos5-dp"
* "rockchip,rk3288-dp"
+ * "rockchip,rk3399-edp"
-reg:
physical base address of the controller and length
of memory mapped region.
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index e832ff9..5ae55ca 100644
--- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -2,7 +2,7 @@ Rockchip RK3288 specific extensions to the Analogix Display Port
================================
Required properties:
-- compatible: "rockchip,rk3288-edp";
+- compatible: "rockchip,rk3288-edp" or "rockchip,rk3399-edp";
- reg: physical base address of the controller and length
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 4f55bdf..f559b5c 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -36,11 +36,17 @@
#define to_dp(nm) container_of(nm, struct rockchip_dp_device, nm)
+enum rockchip_dp_chip_type {
+ RK3288_DP,
+ RK3399_EDP,
+};
+
struct rockchip_dp_chip_data {
u32 lcdsel_grf_reg;
u32 lcdsel_big;
u32 lcdsel_lit;
u32 lcdsel_mask;
+ u32 chip_type;
};
struct rockchip_dp_device {
@@ -115,9 +121,31 @@ static void rockchip_dp_drm_encoder_mode_set(struct drm_encoder *encoder,
static void rockchip_dp_drm_encoder_enable(struct drm_encoder *encoder)
{
struct rockchip_dp_device *dp = to_dp(encoder);
+ int out_mode;
int ret;
u32 val;
+ ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, encoder);
+ if (ret < 0)
+ return;
+
+ switch (dp->data->chip_type) {
+ case RK3399_EDP:
+ /*
+ * For RK3399, VOP Lit must code the out mode to RGB888,
+ * VOP Big must code the out mode to RGB10.
+ */
+ if (ret)
+ out_mode = ROCKCHIP_OUT_MODE_P888;
+ else
+ out_mode = ROCKCHIP_OUT_MODE_AAAA;
+ break;
+
+ default:
+ out_mode = ROCKCHIP_OUT_MODE_AAAA;
+ break;
+ }
+
/*
* FIXME(Yakir): driver should configure the CRTC output video
* mode with the display information which indicated the monitor
@@ -132,17 +160,12 @@ static void rockchip_dp_drm_encoder_enable(struct drm_encoder *encoder)
* RGB666 input video mode, then screen would works prefect.
*/
ret = rockchip_drm_crtc_mode_config(encoder->crtc,
- DRM_MODE_CONNECTOR_eDP,
- ROCKCHIP_OUT_MODE_AAAA);
+ DRM_MODE_CONNECTOR_eDP, out_mode);
if (ret < 0) {
dev_err(dp->dev, "Could not set crtc mode config (%d)\n", ret);
return;
}
- ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, encoder);
- if (ret < 0)
- return;
-
if (ret)
val = dp->data->lcdsel_lit | dp->data->lcdsel_mask;
else
@@ -369,15 +392,25 @@ static const struct dev_pm_ops rockchip_dp_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(rockchip_dp_suspend, rockchip_dp_resume)
};
+static const struct rockchip_dp_chip_data rk3399_edp = {
+ .lcdsel_grf_reg = 0x6250,
+ .lcdsel_big = 0,
+ .lcdsel_lit = BIT(5),
+ .lcdsel_mask = BIT(21),
+ .chip_type = RK3399_EDP,
+};
+
static const struct rockchip_dp_chip_data rk3288_dp = {
.lcdsel_grf_reg = 0x025c,
.lcdsel_big = 0,
.lcdsel_lit = BIT(5),
.lcdsel_mask = BIT(21),
+ .chip_type = RK3288_DP,
};
static const struct of_device_id rockchip_dp_dt_ids[] = {
{.compatible = "rockchip,rk3288-dp", .data = &rk3288_dp },
+ {.compatible = "rockchip,rk3399-edp", .data = &rk3399_edp },
{}
};
MODULE_DEVICE_TABLE(of, rockchip_dp_dt_ids);
--
1.9.1
There're an register define error in ANALOGIX_DP_PLL_REG_1 which introduced
by commit bcec20fd5ad6 ("drm: bridge: analogix/dp: add some rk3288 special
registers setting").
The PHY PLL input clock source is selected by ANALOGIX_DP_PLL_REG_1
BIT 0, not BIT 1.
Signed-off-by: Yakir Yang <[email protected]>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
index 337912b..88d56ad 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -163,8 +163,8 @@
#define HSYNC_POLARITY_CFG (0x1 << 0)
/* ANALOGIX_DP_PLL_REG_1 */
-#define REF_CLK_24M (0x1 << 1)
-#define REF_CLK_27M (0x0 << 1)
+#define REF_CLK_24M (0x1 << 0)
+#define REF_CLK_27M (0x0 << 0)
/* ANALOGIX_DP_LANE_MAP */
#define LANE3_MAP_LOGIC_LANE_0 (0x0 << 6)
--
1.9.1
eDP controller need to declare which vop provide the video source,
and it's defined in GRF registers.
But different chips have different GRF register address, so we need to
create a device data to declare the GRF messages for each chips.
Signed-off-by: Yakir Yang <[email protected]>
---
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 35 ++++++++++++++++++-------
1 file changed, 26 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 6dc1b9b..4f55bdf 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -14,6 +14,7 @@
#include <linux/component.h>
#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
#include <linux/of_graph.h>
#include <linux/regmap.h>
#include <linux/reset.h>
@@ -35,11 +36,12 @@
#define to_dp(nm) container_of(nm, struct rockchip_dp_device, nm)
-/* dp grf register offset */
-#define GRF_SOC_CON6 0x025c
-#define GRF_EDP_LCD_SEL_MASK BIT(5)
-#define GRF_EDP_SEL_VOP_LIT BIT(5)
-#define GRF_EDP_SEL_VOP_BIG 0
+struct rockchip_dp_chip_data {
+ u32 lcdsel_grf_reg;
+ u32 lcdsel_big;
+ u32 lcdsel_lit;
+ u32 lcdsel_mask;
+};
struct rockchip_dp_device {
struct drm_device *drm_dev;
@@ -51,6 +53,8 @@ struct rockchip_dp_device {
struct regmap *grf;
struct reset_control *rst;
+ const struct rockchip_dp_chip_data *data;
+
struct analogix_dp_plat_data plat_data;
};
@@ -140,13 +144,13 @@ static void rockchip_dp_drm_encoder_enable(struct drm_encoder *encoder)
return;
if (ret)
- val = GRF_EDP_SEL_VOP_LIT | (GRF_EDP_LCD_SEL_MASK << 16);
+ val = dp->data->lcdsel_lit | dp->data->lcdsel_mask;
else
- val = GRF_EDP_SEL_VOP_BIG | (GRF_EDP_LCD_SEL_MASK << 16);
+ val = dp->data->lcdsel_big | dp->data->lcdsel_mask;
dev_dbg(dp->dev, "vop %s output to dp\n", (ret) ? "LIT" : "BIG");
- ret = regmap_write(dp->grf, GRF_SOC_CON6, val);
+ ret = regmap_write(dp->grf, dp->data->lcdsel_grf_reg, val);
if (ret != 0) {
dev_err(dp->dev, "Could not write to GRF: %d\n", ret);
return;
@@ -240,6 +244,7 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
void *data)
{
struct rockchip_dp_device *dp = dev_get_drvdata(dev);
+ const struct rockchip_dp_chip_data *dp_data;
struct drm_device *drm_dev = data;
int ret;
@@ -250,10 +255,15 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
*/
dev_set_drvdata(dev, NULL);
+ dp_data = of_device_get_match_data(dev);
+ if (!dp_data)
+ return -ENODEV;
+
ret = rockchip_dp_init(dp);
if (ret < 0)
return ret;
+ dp->data = dp_data;
dp->drm_dev = drm_dev;
ret = rockchip_dp_drm_create_encoder(dp);
@@ -359,8 +369,15 @@ static const struct dev_pm_ops rockchip_dp_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(rockchip_dp_suspend, rockchip_dp_resume)
};
+static const struct rockchip_dp_chip_data rk3288_dp = {
+ .lcdsel_grf_reg = 0x025c,
+ .lcdsel_big = 0,
+ .lcdsel_lit = BIT(5),
+ .lcdsel_mask = BIT(21),
+};
+
static const struct of_device_id rockchip_dp_dt_ids[] = {
- {.compatible = "rockchip,rk3288-dp",},
+ {.compatible = "rockchip,rk3288-dp", .data = &rk3288_dp },
{}
};
MODULE_DEVICE_TABLE(of, rockchip_dp_dt_ids);
--
1.9.1
Some boards don't need to declare a panel device node, like the
display interface is DP monitors, so it's necessary to make the
panel detect to an optional action.
Signed-off-by: Yakir Yang <[email protected]>
---
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 48 ++++++++++++-------------
1 file changed, 22 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index f559b5c..adb38b2 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -319,38 +319,34 @@ static int rockchip_dp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *panel_node, *port, *endpoint;
+ struct drm_panel *panel = NULL;
struct rockchip_dp_device *dp;
- struct drm_panel *panel;
port = of_graph_get_port_by_id(dev->of_node, 1);
- if (!port) {
- dev_err(dev, "can't find output port\n");
- return -EINVAL;
- }
-
- endpoint = of_get_child_by_name(port, "endpoint");
- of_node_put(port);
- if (!endpoint) {
- dev_err(dev, "no output endpoint found\n");
- return -EINVAL;
- }
-
- panel_node = of_graph_get_remote_port_parent(endpoint);
- of_node_put(endpoint);
- if (!panel_node) {
- dev_err(dev, "no output node found\n");
- return -EINVAL;
- }
-
- panel = of_drm_find_panel(panel_node);
- if (!panel) {
- DRM_ERROR("failed to find panel\n");
+ if (port) {
+ endpoint = of_get_child_by_name(port, "endpoint");
+ of_node_put(port);
+ if (!endpoint) {
+ dev_err(dev, "no output endpoint found\n");
+ return -EINVAL;
+ }
+
+ panel_node = of_graph_get_remote_port_parent(endpoint);
+ of_node_put(endpoint);
+ if (!panel_node) {
+ dev_err(dev, "no output node found\n");
+ return -EINVAL;
+ }
+
+ panel = of_drm_find_panel(panel_node);
+ if (!panel) {
+ DRM_ERROR("failed to find panel\n");
+ of_node_put(panel_node);
+ return -EPROBE_DEFER;
+ }
of_node_put(panel_node);
- return -EPROBE_DEFER;
}
- of_node_put(panel_node);
-
dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
if (!dp)
return -ENOMEM;
--
1.9.1
It's helpful to expand the mode_valid callback to platform driver,
so they could valid the display mode or information.
Signed-off-by: Yakir Yang <[email protected]>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 15 +++++++++++++++
include/drm/bridge/analogix_dp.h | 4 ++++
2 files changed, 19 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 4a1b3b8..5af9ce4 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -943,6 +943,20 @@ int analogix_dp_get_modes(struct drm_connector *connector)
return num_modes;
}
+static enum drm_mode_status
+analogix_dp_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct analogix_dp_device *dp = to_dp(connector);
+ enum drm_mode_status status = MODE_OK;
+
+ if (dp->plat_data->mode_valid)
+ status = dp->plat_data->mode_valid(dp->plat_data, connector,
+ mode);
+
+ return status;
+}
+
static struct drm_encoder *
analogix_dp_best_encoder(struct drm_connector *connector)
{
@@ -954,6 +968,7 @@ analogix_dp_best_encoder(struct drm_connector *connector)
static const struct drm_connector_helper_funcs analogix_dp_connector_helper_funcs = {
.get_modes = analogix_dp_get_modes,
.best_encoder = analogix_dp_best_encoder,
+ .mode_valid = analogix_dp_mode_valid,
};
enum drm_connector_status
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 9e5d013..f5348e6 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -29,6 +29,10 @@ struct analogix_dp_plat_data {
int (*attach)(struct analogix_dp_plat_data *, struct drm_bridge *,
struct drm_connector *);
int (*get_modes)(struct analogix_dp_plat_data *);
+
+ enum drm_mode_status (*mode_valid)(struct analogix_dp_plat_data *,
+ struct drm_connector *,
+ struct drm_display_mode *);
};
int analogix_dp_resume(struct device *dev);
--
1.9.1
Rockchip VOP couldn't output YUV video format for eDP controller, so
when driver detect connector support YUV video format, we need to hack
it down to RGB888.
Signed-off-by: Yakir Yang <[email protected]>
---
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index adb38b2..a51e086 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -102,6 +102,24 @@ static int rockchip_dp_powerdown(struct analogix_dp_plat_data *plat_data)
return 0;
}
+static enum drm_mode_status
+rockchip_dp_mode_valid(struct analogix_dp_plat_data *plat_data,
+ struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct drm_display_info *di = &connector->display_info;
+
+ if (di->color_formats & DRM_COLOR_FORMAT_YCRCB444 ||
+ di->color_formats & DRM_COLOR_FORMAT_YCRCB422) {
+ di->color_formats &= ~(DRM_COLOR_FORMAT_YCRCB422 |
+ DRM_COLOR_FORMAT_YCRCB444);
+ di->color_formats |= DRM_COLOR_FORMAT_RGB444;
+ di->bpc = 8;
+ }
+
+ return MODE_OK;
+}
+
static bool
rockchip_dp_drm_encoder_mode_fixup(struct drm_encoder *encoder,
const struct drm_display_mode *mode,
@@ -300,6 +318,7 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
dp->plat_data.dev_type = ROCKCHIP_DP;
dp->plat_data.power_on = rockchip_dp_poweron;
dp->plat_data.power_off = rockchip_dp_powerdown;
+ dp->plat_data.mode_valid = rockchip_dp_mode_valid;
return analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
}
--
1.9.1
The enum value of DP_IRQ_TYPE_HP_CABLE_IN is zero, but driver only
send drm hp event when the irq_type and the enum value is true.
if (irq_type & DP_IRQ_TYPE_HP_CABLE_IN || ...)
drm_helper_hpd_irq_event(dp->drm_dev);
So there would no drm hpd event when cable plug in, to fix that
just need to assign all hotplug enum with no-zero values.
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Yakir Yang <[email protected]>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index f09275d..b456380 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -127,10 +127,10 @@ enum analog_power_block {
};
enum dp_irq_type {
- DP_IRQ_TYPE_HP_CABLE_IN,
- DP_IRQ_TYPE_HP_CABLE_OUT,
- DP_IRQ_TYPE_HP_CHANGE,
- DP_IRQ_TYPE_UNKNOWN,
+ DP_IRQ_TYPE_HP_CABLE_IN = BIT(0),
+ DP_IRQ_TYPE_HP_CABLE_OUT = BIT(1),
+ DP_IRQ_TYPE_HP_CHANGE = BIT(2),
+ DP_IRQ_TYPE_UNKNOWN = BIT(3),
};
struct video_info {
--
1.9.1