2016-10-22 08:35:17

by Jason Liu

Subject: [PATCH 1/1] arm: dts: imx6ul: 14x14-evk: add the optee node

This patch adds the optee node for the i.MX6UL 14x14 evk board

Signed-off-by: Jason Liu <[email protected]>
---
arch/arm/boot/dts/imx6ul-14x14-evk.dts | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
index e281d50..e68dc19 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -30,6 +30,13 @@
status = "okay";
};

+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
--
1.9.1

2016-10-22 17:24:13

by Fabio Estevam

Subject: Re: [PATCH 1/1] arm: dts: imx6ul: 14x14-evk: add the optee node

Hi Jason,

On Sat, Oct 22, 2016 at 12:57 PM, Jason Liu <[email protected]> wrote:
> This patch adds the optee node for the i.MX6UL 14x14 evk board
>
> Signed-off-by: Jason Liu <[email protected]>
> ---
> arch/arm/boot/dts/imx6ul-14x14-evk.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
> index e281d50..e68dc19 100644
> --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
> +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
> @@ -30,6 +30,13 @@
> status = "okay";
> };
>
> + firmware {
> + optee {
> + compatible = "linaro,optee-tz";
> + method = "smc";

It seems we need to wait until the property lands in mainline.