Done by either unindenting some comments or converting them to
multi line comments.
This fixes some checkpatch warnings.
Signed-off-by: Fernando Apesteguia <[email protected]>
---
drivers/staging/dgnc/dgnc_neo.h | 32 ++++++++++++++++++++++----------
1 file changed, 22 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/dgnc/dgnc_neo.h b/drivers/staging/dgnc/dgnc_neo.h
index abddd48..97f0386 100644
--- a/drivers/staging/dgnc/dgnc_neo.h
+++ b/drivers/staging/dgnc/dgnc_neo.h
@@ -28,18 +28,20 @@
************************************************************************/
struct neo_uart_struct {
- u8 txrx; /* WR RHR/THR - Holding Reg */
+ u8 txrx; /* WR RHR/THR - Holding Reg */
u8 ier; /* WR IER - Interrupt Enable Reg */
- u8 isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo Control Reg */
+ u8 isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo
+ * Control Reg
+ */
u8 lcr; /* WR LCR - Line Control Reg */
u8 mcr; /* WR MCR - Modem Control Reg */
u8 lsr; /* WR LSR - Line Status Reg */
u8 msr; /* WR MSR - Modem Status Reg */
u8 spr; /* WR SPR - Scratch Pad Reg */
- u8 fctr; /* WR FCTR - Feature Control Reg */
+ u8 fctr; /* WR FCTR - Feature Control Reg */
u8 efr; /* WR EFR - Enhanced Function Reg */
- u8 tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */
- u8 rfifo; /* WR RXCNT/RXTRG - Receive FIFO Reg */
+ u8 tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */
+ u8 rfifo; /* WR RXCNT/RXTRG - Receive FIFO Reg */
u8 xoffchar1; /* WR XOFF 1 - XOff Character 1 Reg */
u8 xoffchar2; /* WR XOFF 2 - XOff Character 2 Reg */
u8 xonchar1; /* WR XON 1 - Xon Character 1 Reg */
@@ -108,7 +110,9 @@ struct neo_uart_struct {
/* 17158 Extended IIR's */
#define UART_17158_IIR_RDI_TIMEOUT 0x0C /* Receiver data TIMEOUT */
#define UART_17158_IIR_XONXOFF 0x10 /* Received an XON/XOFF char */
-#define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR state change */
+#define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR
+ * state change
+ */
#define UART_17158_IIR_FIFO_ENABLED 0xC0 /* 16550 FIFOs are Enabled */
/*
@@ -119,8 +123,12 @@ struct neo_uart_struct {
#define UART_17158_RXRDY_TIMEOUT 0x2 /* RX Ready Timeout */
#define UART_17158_TXRDY 0x3 /* TX Ready */
#define UART_17158_MSR 0x4 /* Modem State Change */
-#define UART_17158_TX_AND_FIFO_CLR 0x40 /* Transmitter Holding Reg Empty */
-#define UART_17158_RX_FIFO_DATA_ERROR 0x80 /* UART detected an RX FIFO Data error */
+#define UART_17158_TX_AND_FIFO_CLR 0x40 /* Transmitter Holding
+ * Reg Empty
+ */
+#define UART_17158_RX_FIFO_DATA_ERROR 0x80 /* UART detected an RX FIFO
+ * Data error
+ */
/*
* These are the EXTENDED definitions for the 17C158's Interrupt
@@ -132,8 +140,12 @@ struct neo_uart_struct {
#define UART_17158_EFR_RTSDTR 0x40 /* Auto RTS/DTR Flow Control Enable */
#define UART_17158_EFR_CTSDSR 0x80 /* Auto CTS/DSR Flow COntrol Enable */
-#define UART_17158_XOFF_DETECT 0x1 /* Indicates whether chip saw an incoming XOFF char */
-#define UART_17158_XON_DETECT 0x2 /* Indicates whether chip saw an incoming XON char */
+#define UART_17158_XOFF_DETECT 0x1 /* Indicates whether chip saw an
+ * incoming XOFF char
+ */
+#define UART_17158_XON_DETECT 0x2 /* Indicates whether chip saw an
+ * incoming XON char
+ */
#define UART_17158_IER_RSVD1 0x10 /* Reserved by Exar */
#define UART_17158_IER_XOFF 0x20 /* Xoff Interrupt Enable */
--
2.7.4