2016-11-13 17:53:40

by Philippe Reynes

[permalink] [raw]
Subject: [PATCH] net: atheros: atl2: use new api ethtool_{get|set}_link_ksettings

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

The previous implementation of set_settings was modifying
the value of advertising, but with the new API, it's not
possible. The structure ethtool_link_ksettings is defined
as const.

Signed-off-by: Philippe Reynes <[email protected]>
---
drivers/net/ethernet/atheros/atlx/atl2.c | 66 ++++++++++++++++-------------
1 files changed, 36 insertions(+), 30 deletions(-)

diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
index 6911394..63f2dee 100644
--- a/drivers/net/ethernet/atheros/atlx/atl2.c
+++ b/drivers/net/ethernet/atheros/atlx/atl2.c
@@ -1737,81 +1737,87 @@ static void atl2_write_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value)
pci_write_config_word(adapter->pdev, reg, *value);
}

-static int atl2_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
+static int atl2_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
{
struct atl2_adapter *adapter = netdev_priv(netdev);
struct atl2_hw *hw = &adapter->hw;
+ u32 supported, advertising;

- ecmd->supported = (SUPPORTED_10baseT_Half |
+ supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_TP);
- ecmd->advertising = ADVERTISED_TP;
+ advertising = ADVERTISED_TP;

- ecmd->advertising |= ADVERTISED_Autoneg;
- ecmd->advertising |= hw->autoneg_advertised;
+ advertising |= ADVERTISED_Autoneg;
+ advertising |= hw->autoneg_advertised;

- ecmd->port = PORT_TP;
- ecmd->phy_address = 0;
- ecmd->transceiver = XCVR_INTERNAL;
+ cmd->base.port = PORT_TP;
+ cmd->base.phy_address = 0;

if (adapter->link_speed != SPEED_0) {
- ethtool_cmd_speed_set(ecmd, adapter->link_speed);
+ cmd->base.speed = adapter->link_speed;
if (adapter->link_duplex == FULL_DUPLEX)
- ecmd->duplex = DUPLEX_FULL;
+ cmd->base.duplex = DUPLEX_FULL;
else
- ecmd->duplex = DUPLEX_HALF;
+ cmd->base.duplex = DUPLEX_HALF;
} else {
- ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
- ecmd->duplex = DUPLEX_UNKNOWN;
+ cmd->base.speed = SPEED_UNKNOWN;
+ cmd->base.duplex = DUPLEX_UNKNOWN;
}

- ecmd->autoneg = AUTONEG_ENABLE;
+ cmd->base.autoneg = AUTONEG_ENABLE;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
+
return 0;
}

-static int atl2_set_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
+static int atl2_set_link_ksettings(struct net_device *netdev,
+ const struct ethtool_link_ksettings *cmd)
{
struct atl2_adapter *adapter = netdev_priv(netdev);
struct atl2_hw *hw = &adapter->hw;
+ u32 advertising;
+
+ ethtool_convert_link_mode_to_legacy_u32(&advertising,
+ cmd->link_modes.advertising);

while (test_and_set_bit(__ATL2_RESETTING, &adapter->flags))
msleep(1);

- if (ecmd->autoneg == AUTONEG_ENABLE) {
+ if (cmd->base.autoneg == AUTONEG_ENABLE) {
#define MY_ADV_MASK (ADVERTISE_10_HALF | \
ADVERTISE_10_FULL | \
ADVERTISE_100_HALF| \
ADVERTISE_100_FULL)

- if ((ecmd->advertising & MY_ADV_MASK) == MY_ADV_MASK) {
+ if ((advertising & MY_ADV_MASK) == MY_ADV_MASK) {
hw->MediaType = MEDIA_TYPE_AUTO_SENSOR;
hw->autoneg_advertised = MY_ADV_MASK;
- } else if ((ecmd->advertising & MY_ADV_MASK) ==
- ADVERTISE_100_FULL) {
+ } else if ((advertising & MY_ADV_MASK) == ADVERTISE_100_FULL) {
hw->MediaType = MEDIA_TYPE_100M_FULL;
hw->autoneg_advertised = ADVERTISE_100_FULL;
- } else if ((ecmd->advertising & MY_ADV_MASK) ==
- ADVERTISE_100_HALF) {
+ } else if ((advertising & MY_ADV_MASK) == ADVERTISE_100_HALF) {
hw->MediaType = MEDIA_TYPE_100M_HALF;
hw->autoneg_advertised = ADVERTISE_100_HALF;
- } else if ((ecmd->advertising & MY_ADV_MASK) ==
- ADVERTISE_10_FULL) {
+ } else if ((advertising & MY_ADV_MASK) == ADVERTISE_10_FULL) {
hw->MediaType = MEDIA_TYPE_10M_FULL;
hw->autoneg_advertised = ADVERTISE_10_FULL;
- } else if ((ecmd->advertising & MY_ADV_MASK) ==
- ADVERTISE_10_HALF) {
+ } else if ((advertising & MY_ADV_MASK) == ADVERTISE_10_HALF) {
hw->MediaType = MEDIA_TYPE_10M_HALF;
hw->autoneg_advertised = ADVERTISE_10_HALF;
} else {
clear_bit(__ATL2_RESETTING, &adapter->flags);
return -EINVAL;
}
- ecmd->advertising = hw->autoneg_advertised |
+ advertising = hw->autoneg_advertised |
ADVERTISED_TP | ADVERTISED_Autoneg;
} else {
clear_bit(__ATL2_RESETTING, &adapter->flags);
@@ -2080,8 +2086,6 @@ static int atl2_nway_reset(struct net_device *netdev)
}

static const struct ethtool_ops atl2_ethtool_ops = {
- .get_settings = atl2_get_settings,
- .set_settings = atl2_set_settings,
.get_drvinfo = atl2_get_drvinfo,
.get_regs_len = atl2_get_regs_len,
.get_regs = atl2_get_regs,
@@ -2094,6 +2098,8 @@ static int atl2_nway_reset(struct net_device *netdev)
.get_eeprom_len = atl2_get_eeprom_len,
.get_eeprom = atl2_get_eeprom,
.set_eeprom = atl2_set_eeprom,
+ .get_link_ksettings = atl2_get_link_ksettings,
+ .set_link_ksettings = atl2_set_link_ksettings,
};

#define LBYTESWAP(a) ((((a) & 0x00ff00ff) << 8) | \
--
1.7.4.4


2016-11-14 18:38:38

by David Miller

[permalink] [raw]
Subject: Re: [PATCH] net: atheros: atl2: use new api ethtool_{get|set}_link_ksettings

From: Philippe Reynes <[email protected]>
Date: Sun, 13 Nov 2016 18:53:28 +0100

> The ethtool api {get|set}_settings is deprecated.
> We move this driver to new api {get|set}_link_ksettings.
>
> The previous implementation of set_settings was modifying
> the value of advertising, but with the new API, it's not
> possible. The structure ethtool_link_ksettings is defined
> as const.
>
> Signed-off-by: Philippe Reynes <[email protected]>

Applied.