RK1108 is embedded with an ARM Cortex-A7 single core and a DSP core.
It is designed for varies application scenario such as car DVR, sports
DV, secure camera and UAV camera.
This patch series add basic support for it, which can boot a board with
initramfs into shell.
More new feathers will come soon.
Changes in v2:
- split dt-binding header from clk driver
- fix some CodingStyle issues
- add dt-binding documentation for pinctrl
- add pull and drive-strength functionality for pinctrl
- fix timer and gic dt description
- ordering devices by register address
- move the board in the rockchip.txt to the block of Rockchip boards
Andy Yan (6):
dt-bindings: add documentation for rk1108 pinctrl
pinctrl: rockchip: add support for rk1108
ARM: add low level debug uart for rk1108
ARM: dts: add basic support for Rockchip RK1108 SOC
ARM: rockchip: enable support for RK1108 SoC
ARM: dts: rockchip: add rockchip RK1108 Evaluation board
Shawn Lin (4):
dt-bindings: rockchip-dw-mshc: add RK1108 dw-mshc description
dt-bindings: add documentation for rk1108 cru
clk: rockchip: add dt-binding header for rk1108
clk: rockchip: add clock controller for rk1108
Documentation/devicetree/bindings/arm/rockchip.txt | 5 +-
.../bindings/clock/rockchip,rk1108-cru.txt | 60 +++
.../devicetree/bindings/mmc/rockchip-dw-mshc.txt | 1 +
.../bindings/pinctrl/rockchip,pinctrl.txt | 9 +-
arch/arm/Kconfig.debug | 30 ++
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rk1108-evb.dts | 69 ++++
arch/arm/boot/dts/rk1108.dtsi | 428 +++++++++++++++++++
arch/arm/mach-rockchip/rockchip.c | 1 +
drivers/clk/rockchip/Makefile | 1 +
drivers/clk/rockchip/clk-rk1108.c | 451 +++++++++++++++++++++
drivers/clk/rockchip/clk.h | 14 +
drivers/pinctrl/pinctrl-rockchip.c | 87 +++-
include/dt-bindings/clock/rk1108-cru.h | 270 ++++++++++++
14 files changed, 1421 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
create mode 100644 arch/arm/boot/dts/rk1108-evb.dts
create mode 100644 arch/arm/boot/dts/rk1108.dtsi
create mode 100644 drivers/clk/rockchip/clk-rk1108.c
create mode 100644 include/dt-bindings/clock/rk1108-cru.h
--
2.7.4
From: Shawn Lin <[email protected]>
Add "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc" for
dwmmc on rk1108 platform.
Signed-off-by: Shawn Lin <[email protected]>
---
Changes in v2: None
Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
index 07184e8..ea9c1c9 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
@@ -13,6 +13,7 @@ Required Properties:
- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
before RK3288
- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
+ - "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK1108
- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
- "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399
--
2.7.4
From: Shawn Lin <[email protected]>
This adds the dt-binding documentation for the clock and reset unit
found on Rockchip rk1108 SoCs.
Signed-off-by: Shawn Lin <[email protected]>
Signed-off-by: Andy Yan <[email protected]>
---
Changes in v2: None
.../bindings/clock/rockchip,rk1108-cru.txt | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
new file mode 100644
index 0000000..4d2356b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
@@ -0,0 +1,60 @@
+* Rockchip RK1108 Clock and Reset Unit
+
+The RK1108 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk1108-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk1108-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "cif_clkout" - output clock for the cif - optional
+ - "mipi_csi_clkout" - output clock for the mipi csi - optional
+ - "pclkin_vip" - external VIP clock - optional
+ - "ext_i2s" - external I2S clock - optional
+ - "ext_gmac" - external GMAC clock - optional
+ - "mac_ref_clkout" - output clock of the pll in the mac phy
+
+Example: Clock controller node:
+
+ cru: cru@20200000 {
+ compatible = "rockchip,rk1108-cru";
+ reg = <0x20200000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10230000 {
+ compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+ reg = <0x10230000 0x100>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART0>;
+ };
--
2.7.4
From: Shawn Lin <[email protected]>
Add the dt-bindings header for the rk1108, that gets shared
between the clock controller and the clock references in the dts.
Signed-off-by: Shawn Lin <[email protected]>
Signed-off-by: Andy Yan <[email protected]>
---
Changes in v2:
- split dt-binding header from clk driver
include/dt-bindings/clock/rk1108-cru.h | 270 +++++++++++++++++++++++++++++++++
1 file changed, 270 insertions(+)
create mode 100644 include/dt-bindings/clock/rk1108-cru.h
diff --git a/include/dt-bindings/clock/rk1108-cru.h b/include/dt-bindings/clock/rk1108-cru.h
new file mode 100644
index 0000000..6f30008
--- /dev/null
+++ b/include/dt-bindings/clock/rk1108-cru.h
@@ -0,0 +1,270 @@
+/*
+ * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
+ * Author: Shawn Lin <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H
+
+/* pll id */
+#define RK1108_APLL_ID 0
+#define RK1108_DPLL_ID 1
+#define RK1108_GPLL_ID 2
+#define RK1108_ARMCLK 3
+
+/* sclk gates (special clocks) */
+#define SCLK_SPI0 65
+#define SCLK_NANDC 67
+#define SCLK_SDMMC 68
+#define SCLK_SDIO 69
+#define SCLK_EMMC 71
+#define SCLK_UART0 72
+#define SCLK_UART1 73
+#define SCLK_UART2 74
+#define SCLK_I2S0 75
+#define SCLK_I2S1 76
+#define SCLK_I2S2 77
+#define SCLK_TIMER0 78
+#define SCLK_TIMER1 79
+#define SCLK_SFC 80
+#define SCLK_SDMMC_DRV 81
+#define SCLK_SDIO_DRV 82
+#define SCLK_EMMC_DRV 83
+#define SCLK_SDMMC_SAMPLE 84
+#define SCLK_SDIO_SAMPLE 85
+#define SCLK_EMMC_SAMPLE 86
+
+/* aclk gates */
+#define ACLK_DMAC 251
+#define ACLK_PRE 252
+#define ACLK_CORE 253
+#define ACLK_ENMCORE 254
+
+/* pclk gates */
+#define PCLK_GPIO1 321
+#define PCLK_GPIO2 322
+#define PCLK_GPIO3 323
+#define PCLK_GRF 329
+#define PCLK_I2C1 333
+#define PCLK_I2C2 334
+#define PCLK_I2C3 335
+#define PCLK_SPI 338
+#define PCLK_SFC 339
+#define PCLK_UART0 341
+#define PCLK_UART1 342
+#define PCLK_UART2 343
+#define PCLK_TSADC 344
+#define PCLK_PWM 350
+#define PCLK_TIMER 353
+#define PCLK_PERI 363
+
+/* hclk gates */
+#define HCLK_I2S0_8CH 442
+#define HCLK_I2S1_8CH 443
+#define HCLK_I2S2_2CH 444
+#define HCLK_NANDC 453
+#define HCLK_SDMMC 456
+#define HCLK_SDIO 457
+#define HCLK_EMMC 459
+#define HCLK_PERI 478
+#define HCLK_SFC 479
+
+#define CLK_NR_CLKS (HCLK_SFC + 1)
+
+/* reset id */
+#define SRST_CORE_PO_AD 0
+#define SRST_CORE_AD 1
+#define SRST_L2_AD 2
+#define SRST_CPU_NIU_AD 3
+#define SRST_CORE_PO 4
+#define SRST_CORE 5
+#define SRST_L2 6
+#define SRST_CORE_DBG 8
+#define PRST_DBG 9
+#define RST_DAP 10
+#define PRST_DBG_NIU 11
+#define ARST_STRC_SYS_AD 15
+
+#define SRST_DDRPHY_CLKDIV 16
+#define SRST_DDRPHY 17
+#define PRST_DDRPHY 18
+#define PRST_HDMIPHY 19
+#define PRST_VDACPHY 20
+#define PRST_VADCPHY 21
+#define PRST_MIPI_CSI_PHY 22
+#define PRST_MIPI_DSI_PHY 23
+#define PRST_ACODEC 24
+#define ARST_BUS_NIU 25
+#define PRST_TOP_NIU 26
+#define ARST_INTMEM 27
+#define HRST_ROM 28
+#define ARST_DMAC 29
+#define SRST_MSCH_NIU 30
+#define PRST_MSCH_NIU 31
+
+#define PRST_DDRUPCTL 32
+#define NRST_DDRUPCTL 33
+#define PRST_DDRMON 34
+#define HRST_I2S0_8CH 35
+#define MRST_I2S0_8CH 36
+#define HRST_I2S1_2CH 37
+#define MRST_IS21_2CH 38
+#define HRST_I2S2_2CH 39
+#define MRST_I2S2_2CH 40
+#define HRST_CRYPTO 41
+#define SRST_CRYPTO 42
+#define PRST_SPI 43
+#define SRST_SPI 44
+#define PRST_UART0 45
+#define PRST_UART1 46
+#define PRST_UART2 47
+
+#define SRST_UART0 48
+#define SRST_UART1 49
+#define SRST_UART2 50
+#define PRST_I2C1 51
+#define PRST_I2C2 52
+#define PRST_I2C3 53
+#define SRST_I2C1 54
+#define SRST_I2C2 55
+#define SRST_I2C3 56
+#define PRST_PWM1 58
+#define SRST_PWM1 60
+#define PRST_WDT 61
+#define PRST_GPIO1 62
+#define PRST_GPIO2 63
+
+#define PRST_GPIO3 64
+#define PRST_GRF 65
+#define PRST_EFUSE 66
+#define PRST_EFUSE512 67
+#define PRST_TIMER0 68
+#define SRST_TIMER0 69
+#define SRST_TIMER1 70
+#define PRST_TSADC 71
+#define SRST_TSADC 72
+#define PRST_SARADC 73
+#define SRST_SARADC 74
+#define HRST_SYSBUS 75
+#define PRST_USBGRF 76
+
+#define ARST_PERIPH_NIU 80
+#define HRST_PERIPH_NIU 81
+#define PRST_PERIPH_NIU 82
+#define HRST_PERIPH 83
+#define HRST_SDMMC 84
+#define HRST_SDIO 85
+#define HRST_EMMC 86
+#define HRST_NANDC 87
+#define NRST_NANDC 88
+#define HRST_SFC 89
+#define SRST_SFC 90
+#define ARST_GMAC 91
+#define HRST_OTG 92
+#define SRST_OTG 93
+#define SRST_OTG_ADP 94
+#define HRST_HOST0 95
+
+#define HRST_HOST0_AUX 96
+#define HRST_HOST0_ARB 97
+#define SRST_HOST0_EHCIPHY 98
+#define SRST_HOST0_UTMI 99
+#define SRST_USBPOR 100
+#define SRST_UTMI0 101
+#define SRST_UTMI1 102
+
+#define ARST_VIO0_NIU 102
+#define ARST_VIO1_NIU 103
+#define HRST_VIO_NIU 104
+#define PRST_VIO_NIU 105
+#define ARST_VOP 106
+#define HRST_VOP 107
+#define DRST_VOP 108
+#define ARST_IEP 109
+#define HRST_IEP 110
+#define ARST_RGA 111
+#define HRST_RGA 112
+#define SRST_RGA 113
+#define PRST_CVBS 114
+#define PRST_HDMI 115
+#define SRST_HDMI 116
+#define PRST_MIPI_DSI 117
+
+#define ARST_ISP_NIU 118
+#define HRST_ISP_NIU 119
+#define HRST_ISP 120
+#define SRST_ISP 121
+#define ARST_VIP0 122
+#define HRST_VIP0 123
+#define PRST_VIP0 124
+#define ARST_VIP1 125
+#define HRST_VIP1 126
+#define PRST_VIP1 127
+#define ARST_VIP2 128
+#define HRST_VIP2 129
+#define PRST_VIP2 120
+#define ARST_VIP3 121
+#define HRST_VIP3 122
+#define PRST_VIP4 123
+
+#define PRST_CIF1TO4 124
+#define SRST_CVBS_CLK 125
+#define HRST_CVBS 126
+
+#define ARST_VPU_NIU 140
+#define HRST_VPU_NIU 141
+#define ARST_VPU 142
+#define HRST_VPU 143
+#define ARST_RKVDEC_NIU 144
+#define HRST_RKVDEC_NIU 145
+#define ARST_RKVDEC 146
+#define HRST_RKVDEC 147
+#define SRST_RKVDEC_CABAC 148
+#define SRST_RKVDEC_CORE 149
+#define ARST_RKVENC_NIU 150
+#define HRST_RKVENC_NIU 151
+#define ARST_RKVENC 152
+#define HRST_RKVENC 153
+#define SRST_RKVENC_CORE 154
+
+#define SRST_DSP_CORE 156
+#define SRST_DSP_SYS 157
+#define SRST_DSP_GLOBAL 158
+#define SRST_DSP_OECM 159
+#define PRST_DSP_IOP_NIU 160
+#define ARST_DSP_EPP_NIU 161
+#define ARST_DSP_EDP_NIU 162
+#define PRST_DSP_DBG_NIU 163
+#define PRST_DSP_CFG_NIU 164
+#define PRST_DSP_GRF 165
+#define PRST_DSP_MAILBOX 166
+#define PRST_DSP_INTC 167
+#define PRST_DSP_PFM_MON 169
+#define SRST_DSP_PFM_MON 170
+#define ARST_DSP_EDAP_NIU 171
+
+#define SRST_PMU 172
+#define SRST_PMU_I2C0 173
+#define PRST_PMU_I2C0 174
+#define PRST_PMU_GPIO0 175
+#define PRST_PMU_INTMEM 176
+#define PRST_PMU_PWM0 177
+#define SRST_PMU_PWM0 178
+#define PRST_PMU_GRF 179
+#define SRST_PMU_NIU 180
+#define SRST_PMU_PVTM 181
+#define ARST_DSP_EDP_PERF 184
+#define ARST_DSP_EPP_PERF 185
+
+#endif /* _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H */
+
--
2.7.4
From: Shawn Lin <[email protected]>
Add the clock tree definition and driver for rk1108 SoC.
Signed-off-by: Shawn Lin <[email protected]>
Tested-by: Jacob Chen <[email protected]>
Signed-off-by: Andy Yan <[email protected]>
---
Changes in v2:
- fix some CodingStyle issues
drivers/clk/rockchip/Makefile | 1 +
drivers/clk/rockchip/clk-rk1108.c | 451 ++++++++++++++++++++++++++++++++++++++
drivers/clk/rockchip/clk.h | 14 ++
3 files changed, 466 insertions(+)
create mode 100644 drivers/clk/rockchip/clk-rk1108.c
diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
index b5f2c8e..16e098c 100644
--- a/drivers/clk/rockchip/Makefile
+++ b/drivers/clk/rockchip/Makefile
@@ -11,6 +11,7 @@ obj-y += clk-mmc-phase.o
obj-y += clk-ddr.o
obj-$(CONFIG_RESET_CONTROLLER) += softrst.o
+obj-y += clk-rk1108.o
obj-y += clk-rk3036.o
obj-y += clk-rk3188.o
obj-y += clk-rk3228.o
diff --git a/drivers/clk/rockchip/clk-rk1108.c b/drivers/clk/rockchip/clk-rk1108.c
new file mode 100644
index 0000000..e3a4f74
--- /dev/null
+++ b/drivers/clk/rockchip/clk-rk1108.c
@@ -0,0 +1,451 @@
+/*
+ * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
+ * Author: Shawn Lin <[email protected]>
+ * Andy Yan <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+#include <dt-bindings/clock/rk1108-cru.h>
+#include "clk.h"
+
+#define RK1108_GRF_SOC_STATUS0 0x480
+
+enum rk1108_plls {
+ apll, dpll, gpll,
+};
+
+static struct rockchip_pll_rate_table rk1108_pll_rates[] = {
+ /* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
+ RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
+ RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 912000000, 1, 76, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 900000000, 4, 300, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 888000000, 1, 74, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 600000000, 1, 75, 3, 1, 1, 0),
+ RK3036_PLL_RATE( 594000000, 2, 99, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 504000000, 1, 63, 3, 1, 1, 0),
+ RK3036_PLL_RATE( 500000000, 6, 250, 2, 1, 1, 0),
+ RK3036_PLL_RATE( 408000000, 1, 68, 2, 2, 1, 0),
+ RK3036_PLL_RATE( 312000000, 1, 52, 2, 2, 1, 0),
+ RK3036_PLL_RATE( 216000000, 1, 72, 4, 2, 1, 0),
+ RK3036_PLL_RATE( 96000000, 1, 64, 4, 4, 1, 0),
+ { /* sentinel */ },
+};
+
+#define RK1108_DIV_CORE_MASK 0xf
+#define RK1108_DIV_CORE_SHIFT 4
+
+#define RK1108_CLKSEL0(_core_peri_div) \
+ { \
+ .reg = RK1108_CLKSEL_CON(1), \
+ .val = HIWORD_UPDATE(_core_peri_div, RK1108_DIV_CORE_MASK, \
+ RK1108_DIV_CORE_SHIFT) \
+ }
+
+#define RK1108_CPUCLK_RATE(_prate, _core_peri_div) \
+ { \
+ .prate = _prate, \
+ .divs = { \
+ RK1108_CLKSEL0(_core_peri_div), \
+ }, \
+ }
+
+static struct rockchip_cpuclk_rate_table rk1108_cpuclk_rates[] __initdata = {
+ RK1108_CPUCLK_RATE(816000000, 4),
+ RK1108_CPUCLK_RATE(600000000, 4),
+ RK1108_CPUCLK_RATE(312000000, 4),
+};
+
+static const struct rockchip_cpuclk_reg_data rk1108_cpuclk_data = {
+ .core_reg = RK1108_CLKSEL_CON(0),
+ .div_core_shift = 0,
+ .div_core_mask = 0x1f,
+ .mux_core_alt = 1,
+ .mux_core_main = 0,
+ .mux_core_shift = 8,
+ .mux_core_mask = 0x1,
+};
+
+PNAME(mux_pll_p) = { "xin24m", "xin24m"};
+PNAME(mux_ddrphy_p) = { "dpll_ddr", "gpll_ddr", "apll_ddr" };
+PNAME(mux_armclk_p) = { "apll_core", "gpll_core", "dpll_core" };
+PNAME(mux_pmu_1f) = { "xin24m", "pmu_24m"};
+PNAME(mux_usb480m_phy_p) = { "usb480m_phy0", "usb480m_phy1" };
+PNAME(mux_usb480m_p) = { "usb480m_phy", "xin24m" };
+PNAME(mux_hdmiphy_p) = { "hdmiphy_phy", "pclk_top_pre", "xin24m" };
+PNAME(mux_pll_src_4plls_p) = { "dpll", "hdmiphy", "gpll", "usb480m" };
+PNAME(mux_pll_src_3plls_p) = { "apll", "gpll", "dpll" };
+PNAME(mux_pll_src_2plls_p) = { "dpll", "gpll" };
+PNAME(mux_aclk_peri_src_p) = { "aclk_peri_src_dpll", "aclk_peri_src_gpll" };
+PNAME(mux_aclk_bus_src_p) = { "aclk_bus_src_gpll", "aclk_bus_src_apll", "aclk_bus_src_dpll" };
+PNAME(mux_mmc_src_p) = { "dpll", "gpll", "xin24m", "usb480m" };
+PNAME(mux_pll_src_dpll_gpll_usb480m_p) = { "dpll", "gpll", "usb480m" };
+PNAME(mux_uart0_p) = { "uart0_src", "uart0_frac", "xin24m" };
+PNAME(mux_uart1_p) = { "uart1_src", "uart1_frac", "xin24m" };
+PNAME(mux_uart2_p) = { "uart2_src", "uart2_frac", "xin24m" };
+
+static struct rockchip_pll_clock rk1108_pll_clks[] __initdata = {
+ [apll] = PLL(pll_rk3399, RK1108_APLL_ID, "apll", mux_pll_p, 0, RK1108_PLL_CON(0),
+ RK1108_PLL_CON(3), 8, 31, 0, rk1108_pll_rates),
+ [dpll] = PLL(pll_rk3399, RK1108_DPLL_ID, "dpll", mux_pll_p, 0, RK1108_PLL_CON(8),
+ RK1108_PLL_CON(11), 8, 31, 0, NULL),
+ [gpll] = PLL(pll_rk3399, RK1108_GPLL_ID, "gpll", mux_pll_p, 0, RK1108_PLL_CON(16),
+ RK1108_PLL_CON(19), 8, 31, ROCKCHIP_PLL_SYNC_RATE, rk1108_pll_rates),
+};
+
+#define MFLAGS CLK_MUX_HIWORD_MASK
+#define DFLAGS CLK_DIVIDER_HIWORD_MASK
+#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
+
+static struct rockchip_clk_branch rk1108_uart0_fracmux __initdata =
+ MUX(SCLK_UART0, "sclk_uart0", mux_uart0_p, CLK_SET_RATE_PARENT,
+ RK1108_CLKSEL_CON(13), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk1108_uart1_fracmux __initdata =
+ MUX(SCLK_UART1, "sclk_uart1", mux_uart1_p, CLK_SET_RATE_PARENT,
+ RK1108_CLKSEL_CON(14), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk1108_uart2_fracmux __initdata =
+ MUX(SCLK_UART2, "sclk_uart2", mux_uart2_p, CLK_SET_RATE_PARENT,
+ RK1108_CLKSEL_CON(15), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk1108_clk_branches[] __initdata = {
+ /*
+ * Clock-Architecture Diagram 2
+ */
+
+ /* PD_CORE */
+ GATE(0, "dpll_core", "dpll", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(0), 1, GFLAGS),
+ GATE(0, "apll_core", "apll", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(0), 0, GFLAGS),
+ GATE(0, "gpll_core", "gpll", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(0), 2, GFLAGS),
+ COMPOSITE_NOMUX(0, "pclken_dbg", "armclk", CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(1), 4, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
+ RK1108_CLKGATE_CON(0), 5, GFLAGS),
+ COMPOSITE_NOMUX(ACLK_ENMCORE, "aclkenm_core", "armclk", CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(1), 0, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
+ RK1108_CLKGATE_CON(0), 4, GFLAGS),
+ GATE(ACLK_CORE, "aclk_core", "aclkenm_core", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(11), 0, GFLAGS),
+ GATE(0, "pclk_dbg", "pclken_dbg", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(11), 1, GFLAGS),
+
+ /* PD_RKVENC */
+
+ /* PD_RKVDEC */
+
+ /* PD_PMU_wrapper */
+ COMPOSITE_NOMUX(0, "pmu_24m_ena", "gpll", CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(38), 0, 5, DFLAGS,
+ RK1108_CLKGATE_CON(8), 12, GFLAGS),
+ GATE(0, "pmu", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(10), 0, GFLAGS),
+ GATE(0, "intmem1", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(10), 1, GFLAGS),
+ GATE(0, "gpio0_pmu", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(10), 2, GFLAGS),
+ GATE(0, "pmugrf", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(10), 3, GFLAGS),
+ GATE(0, "pmu_noc", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(10), 4, GFLAGS),
+ GATE(0, "i2c0_pmu_pclk", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(10), 5, GFLAGS),
+ GATE(0, "pwm0_pmu_pclk", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(10), 6, GFLAGS),
+ COMPOSITE(0, "pwm0_pmu_clk", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(12), 7, 1, MFLAGS, 0, 7, DFLAGS,
+ RK1108_CLKGATE_CON(8), 15, GFLAGS),
+ COMPOSITE(0, "i2c0_pmu_clk", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(19), 7, 1, MFLAGS, 0, 7, DFLAGS,
+ RK1108_CLKGATE_CON(8), 14, GFLAGS),
+ GATE(0, "pvtm_pmu", "xin24m", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(8), 13, GFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 4
+ */
+ COMPOSITE(0, "aclk_vio0_2wrap_occ", mux_pll_src_4plls_p, CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(28), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK1108_CLKGATE_CON(6), 0, GFLAGS),
+ GATE(0, "aclk_vio0_pre", "aclk_vio0_2wrap_occ", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(17), 0, GFLAGS),
+ COMPOSITE_NOMUX(0, "hclk_vio_pre", "aclk_vio0_pre", 0,
+ RK1108_CLKSEL_CON(29), 0, 5, DFLAGS,
+ RK1108_CLKGATE_CON(7), 2, GFLAGS),
+ COMPOSITE_NOMUX(0, "pclk_vio_pre", "aclk_vio0_pre", 0,
+ RK1108_CLKSEL_CON(29), 8, 5, DFLAGS,
+ RK1108_CLKGATE_CON(7), 3, GFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 5
+ */
+
+ /* PD_BUS */
+ GATE(0, "aclk_bus_src_gpll", "gpll", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(1), 0, GFLAGS),
+ GATE(0, "aclk_bus_src_apll", "apll", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(1), 1, GFLAGS),
+ GATE(0, "aclk_bus_src_dpll", "dpll", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(1), 2, GFLAGS),
+ COMPOSITE_NOGATE(ACLK_PRE, "aclk_bus_pre", mux_aclk_bus_src_p, 0,
+ RK1108_CLKSEL_CON(2), 8, 2, MFLAGS, 0, 5, DFLAGS),
+ COMPOSITE_NOMUX(0, "hclk_bus_pre", "aclk_bus_2wrap_occ", 0,
+ RK1108_CLKSEL_CON(3), 0, 5, DFLAGS,
+ RK1108_CLKGATE_CON(1), 4, GFLAGS),
+ COMPOSITE_NOMUX(0, "pclken_bus", "aclk_bus_2wrap_occ", 0,
+ RK1108_CLKSEL_CON(3), 8, 5, DFLAGS,
+ RK1108_CLKGATE_CON(1), 5, GFLAGS),
+ GATE(0, "pclk_bus_pre", "pclken_bus", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(1), 6, GFLAGS),
+ GATE(0, "pclk_top_pre", "pclken_bus", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(1), 7, GFLAGS),
+ GATE(0, "pclk_ddr_pre", "pclken_bus", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(1), 8, GFLAGS),
+ GATE(0, "clk_timer0", "mux_pll_p", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(1), 9, GFLAGS),
+ GATE(0, "clk_timer1", "mux_pll_p", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(1), 10, GFLAGS),
+ GATE(0, "pclk_timer", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(13), 4, GFLAGS),
+
+ COMPOSITE(0, "uart0_src", mux_pll_src_dpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(13), 12, 2, MFLAGS, 0, 7, DFLAGS,
+ RK1108_CLKGATE_CON(3), 1, GFLAGS),
+ COMPOSITE(0, "uart1_src", mux_pll_src_dpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(14), 12, 2, MFLAGS, 0, 7, DFLAGS,
+ RK1108_CLKGATE_CON(3), 3, GFLAGS),
+ COMPOSITE(0, "uart21_src", mux_pll_src_dpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(15), 12, 2, MFLAGS, 0, 7, DFLAGS,
+ RK1108_CLKGATE_CON(3), 5, GFLAGS),
+
+ COMPOSITE_FRACMUX(0, "uart0_frac", "uart0_src", CLK_SET_RATE_PARENT,
+ RK1108_CLKSEL_CON(16), 0,
+ RK1108_CLKGATE_CON(3), 2, GFLAGS,
+ &rk1108_uart0_fracmux),
+ COMPOSITE_FRACMUX(0, "uart1_frac", "uart1_src", CLK_SET_RATE_PARENT,
+ RK1108_CLKSEL_CON(17), 0,
+ RK1108_CLKGATE_CON(3), 4, GFLAGS,
+ &rk1108_uart1_fracmux),
+ COMPOSITE_FRACMUX(0, "uart2_frac", "uart2_src", CLK_SET_RATE_PARENT,
+ RK1108_CLKSEL_CON(18), 0,
+ RK1108_CLKGATE_CON(3), 6, GFLAGS,
+ &rk1108_uart2_fracmux),
+ GATE(PCLK_UART0, "pclk_uart0", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(13), 10, GFLAGS),
+ GATE(PCLK_UART1, "pclk_uart1", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(13), 11, GFLAGS),
+ GATE(PCLK_UART2, "pclk_uart2", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(13), 12, GFLAGS),
+
+ COMPOSITE(0, "clk_i2c1", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(19), 15, 2, MFLAGS, 8, 7, DFLAGS,
+ RK1108_CLKGATE_CON(3), 7, GFLAGS),
+ COMPOSITE(0, "clk_i2c2", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(20), 7, 2, MFLAGS, 0, 7, DFLAGS,
+ RK1108_CLKGATE_CON(3), 8, GFLAGS),
+ COMPOSITE(0, "clk_i2c3", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(20), 15, 2, MFLAGS, 8, 7, DFLAGS,
+ RK1108_CLKGATE_CON(3), 9, GFLAGS),
+ GATE(0, "pclk_i2c1", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(13), 0, GFLAGS),
+ GATE(0, "pclk_i2c2", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(13), 1, GFLAGS),
+ GATE(0, "pclk_i2c3", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(13), 2, GFLAGS),
+ COMPOSITE(0, "clk_pwm1", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(12), 15, 2, MFLAGS, 8, 7, DFLAGS,
+ RK1108_CLKGATE_CON(3), 10, GFLAGS),
+ GATE(0, "pclk_pwm1", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(13), 6, GFLAGS),
+ GATE(0, "pclk_wdt", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(13), 3, GFLAGS),
+ GATE(0, "pclk_gpio1", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(13), 7, GFLAGS),
+ GATE(0, "pclk_gpio2", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(13), 8, GFLAGS),
+ GATE(0, "pclk_gpio3", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(13), 9, GFLAGS),
+
+ GATE(0, "pclk_grf", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(14), 0, GFLAGS),
+
+ GATE(ACLK_DMAC, "aclk_dmac", "aclk_bus_pre", 0,
+ RK1108_CLKGATE_CON(12), 2, GFLAGS),
+ GATE(0, "hclk_rom", "hclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(12), 3, GFLAGS),
+ GATE(0, "aclk_intmem", "aclk_bus_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(12), 1, GFLAGS),
+
+ /* PD_DDR */
+ GATE(0, "apll_ddr", "apll", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(0), 8, GFLAGS),
+ GATE(0, "dpll_ddr", "dpll", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(0), 9, GFLAGS),
+ GATE(0, "gpll_ddr", "gpll", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(0), 10, GFLAGS),
+ COMPOSITE(0, "ddrphy4x", mux_ddrphy_p, CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(4), 8, 2, MFLAGS, 0, 3,
+ DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
+ RK1108_CLKGATE_CON(10), 9, GFLAGS),
+ GATE(0, "ddrupctl", "ddrphy_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(12), 4, GFLAGS),
+ GATE(0, "ddrc", "ddrphy", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(12), 5, GFLAGS),
+ GATE(0, "ddrmon", "ddrphy_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(12), 6, GFLAGS),
+ GATE(0, "timer_clk", "xin24m", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(0), 11, GFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 6
+ */
+
+ /* PD_PERI */
+ COMPOSITE_NOMUX(0, "pclk_periph_pre", "gpll", 0,
+ RK1108_CLKSEL_CON(23), 10, 5, DFLAGS,
+ RK1108_CLKGATE_CON(4), 5, GFLAGS),
+ GATE(0, "pclk_periph", "pclk_periph_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(15), 13, GFLAGS),
+ COMPOSITE_NOMUX(0, "hclk_periph_pre", "gpll", 0,
+ RK1108_CLKSEL_CON(23), 5, 5, DFLAGS,
+ RK1108_CLKGATE_CON(4), 4, GFLAGS),
+ GATE(0, "hclk_periph", "hclk_periph_pre", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(15), 12, GFLAGS),
+
+ GATE(0, "aclk_peri_src_dpll", "dpll", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(4), 1, GFLAGS),
+ GATE(0, "aclk_peri_src_gpll", "gpll", CLK_IGNORE_UNUSED,
+ RK1108_CLKGATE_CON(4), 2, GFLAGS),
+ COMPOSITE(0, "aclk_periph", mux_aclk_peri_src_p, CLK_IGNORE_UNUSED,
+ RK1108_CLKSEL_CON(23), 15, 2, MFLAGS, 0, 5, DFLAGS,
+ RK1108_CLKGATE_CON(15), 11, GFLAGS),
+
+ COMPOSITE(SCLK_SDMMC, "sclk_sdmmc0", mux_mmc_src_p, 0,
+ RK1108_CLKSEL_CON(25), 8, 2, MFLAGS, 0, 8, DFLAGS,
+ RK1108_CLKGATE_CON(5), 0, GFLAGS),
+
+ COMPOSITE_NODIV(0, "sclk_sdio_src", mux_mmc_src_p, 0,
+ RK1108_CLKSEL_CON(25), 10, 2, MFLAGS,
+ RK1108_CLKGATE_CON(5), 2, GFLAGS),
+ DIV(SCLK_SDIO, "sclk_sdio", "sclk_sdio_src", 0,
+ RK1108_CLKSEL_CON(26), 0, 8, DFLAGS),
+
+ COMPOSITE_NODIV(0, "sclk_emmc_src", mux_mmc_src_p, 0,
+ RK1108_CLKSEL_CON(25), 12, 2, MFLAGS,
+ RK1108_CLKGATE_CON(5), 1, GFLAGS),
+ DIV(SCLK_EMMC, "sclk_emmc", "sclk_emmc_src", 0,
+ RK2928_CLKSEL_CON(26), 8, 8, DFLAGS),
+ GATE(HCLK_SDMMC, "hclk_sdmmc", "hclk_periph", 0, RK1108_CLKGATE_CON(15), 0, GFLAGS),
+ GATE(HCLK_SDIO, "hclk_sdio", "hclk_periph", 0, RK1108_CLKGATE_CON(15), 1, GFLAGS),
+ GATE(HCLK_EMMC, "hclk_emmc", "hclk_periph", 0, RK1108_CLKGATE_CON(15), 2, GFLAGS),
+
+ COMPOSITE(SCLK_NANDC, "sclk_nandc", mux_pll_src_2plls_p, 0,
+ RK1108_CLKSEL_CON(27), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK1108_CLKGATE_CON(5), 3, GFLAGS),
+ GATE(HCLK_NANDC, "hclk_nandc", "hclk_periph", 0, RK1108_CLKGATE_CON(15), 3, GFLAGS),
+
+ COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_2plls_p, 0,
+ RK1108_CLKSEL_CON(27), 7, 2, MFLAGS, 0, 7, DFLAGS,
+ RK1108_CLKGATE_CON(5), 4, GFLAGS),
+ GATE(HCLK_SFC, "hclk_sfc", "hclk_periph", 0, RK1108_CLKGATE_CON(15), 10, GFLAGS),
+ MMC(SCLK_SDMMC_DRV, "sdmmc_drv", "sclk_sdmmc", RK1108_SDMMC_CON0, 1),
+ MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "sclk_sdmmc", RK1108_SDMMC_CON1, 1),
+
+ MMC(SCLK_SDIO_DRV, "sdio_drv", "sclk_sdio", RK1108_SDIO_CON0, 1),
+ MMC(SCLK_SDIO_SAMPLE, "sdio_sample", "sclk_sdio", RK1108_SDIO_CON1, 1),
+
+ MMC(SCLK_EMMC_DRV, "emmc_drv", "sclk_emmc", RK1108_EMMC_CON0, 1),
+ MMC(SCLK_EMMC_SAMPLE, "emmc_sample", "sclk_emmc", RK1108_EMMC_CON1, 1),
+};
+
+static const char *const rk1108_critical_clocks[] __initconst = {
+ "aclk_core",
+ "aclk_bus_src_gpll",
+ "aclk_periph",
+ "hclk_periph",
+ "pclk_periph",
+};
+
+static void __init rk1108_clk_init(struct device_node *np)
+{
+ struct rockchip_clk_provider *ctx;
+ void __iomem *reg_base;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base) {
+ pr_err("%s: could not map cru region\n", __func__);
+ return;
+ }
+
+ ctx = rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
+ if (IS_ERR(ctx)) {
+ pr_err("%s: rockchip clk init failed\n", __func__);
+ iounmap(reg_base);
+ return;
+ }
+
+ rockchip_clk_register_plls(ctx, rk1108_pll_clks,
+ ARRAY_SIZE(rk1108_pll_clks),
+ RK1108_GRF_SOC_STATUS0);
+ rockchip_clk_register_branches(ctx, rk1108_clk_branches,
+ ARRAY_SIZE(rk1108_clk_branches));
+ rockchip_clk_protect_critical(rk1108_critical_clocks,
+ ARRAY_SIZE(rk1108_critical_clocks));
+
+ rockchip_clk_register_armclk(ctx, RK1108_ARMCLK, "armclk",
+ mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
+ &rk1108_cpuclk_data, rk1108_cpuclk_rates,
+ ARRAY_SIZE(rk1108_cpuclk_rates));
+
+ rockchip_register_softrst(np, 13, reg_base + RK1108_SOFTRST_CON(0),
+ ROCKCHIP_SOFTRST_HIWORD_MASK);
+
+ rockchip_register_restart_notifier(ctx, RK1108_GLB_SRST_FST, NULL);
+
+ rockchip_clk_of_add_provider(np, ctx);
+}
+CLK_OF_DECLARE(rk1108_cru, "rockchip,rk1108-cru", rk1108_clk_init);
diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
index 1653edd..90c580a 100644
--- a/drivers/clk/rockchip/clk.h
+++ b/drivers/clk/rockchip/clk.h
@@ -34,6 +34,20 @@ struct clk;
#define HIWORD_UPDATE(val, mask, shift) \
((val) << (shift) | (mask) << ((shift) + 16))
+/* register positions shared by RK1108, RK2928, RK3036, RK3066, RK3188 and RK3228 */
+#define RK1108_PLL_CON(x) ((x) * 0x4)
+#define RK1108_CLKSEL_CON(x) ((x) * 0x4 + 0x60)
+#define RK1108_CLKGATE_CON(x) ((x) * 0x4 + 0x120)
+#define RK1108_SOFTRST_CON(x) ((x) * 0x4 + 0x180)
+#define RK1108_GLB_SRST_FST 0x1c0
+#define RK1108_GLB_SRST_SND 0x1c4
+#define RK1108_SDMMC_CON0 0x1d8
+#define RK1108_SDMMC_CON1 0x1dc
+#define RK1108_SDIO_CON0 0x1e0
+#define RK1108_SDIO_CON1 0x1e4
+#define RK1108_EMMC_CON0 0x1e8
+#define RK1108_EMMC_CON1 0x1ec
+
#define RK2928_PLL_CON(x) ((x) * 0x4)
#define RK2928_MODE_CON 0x40
#define RK2928_CLKSEL_CON(x) ((x) * 0x4 + 0x44)
--
2.7.4
This adds the dt-binding documentation for rk1108 pinctrl
Signed-off-by: Andy Yan <[email protected]>
---
Changes in v2:
- add dt-binding documentation for pinctrl
Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
index c68b955..4722bc6 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
@@ -19,10 +19,11 @@ The pins are grouped into up to 5 individual pin banks which need to be
defined as gpio sub-nodes of the pinmux controller.
Required properties for iomux controller:
- - compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl"
- "rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl"
- "rockchip,rk3228-pinctrl", "rockchip,rk3288-pinctrl"
- "rockchip,rk3368-pinctrl", "rockchip,rk3399-pinctrl"
+ - compatible: one of "rockchip,rk1108-pinctrl", "rockchip,rk2928-pinctrl"
+ "rockchip,rk3066a-pinctrl", "rockchip,rk3066b-pinctrl"
+ "rockchip,rk3188-pinctrl", "rockchip,rk3228-pinctrl"
+ "rockchip,rk3288-pinctrl", "rockchip,rk3368-pinctrl"
+ "rockchip,rk3399-pinctrl"
- rockchip,grf: phandle referencing a syscon providing the
"general register files"
--
2.7.4
This add pinctrl support for Rockchip RK1108 Soc.
Signed-off-by: Andy Yan <[email protected]>
---
Changes in v2:
- add pull and drive-strength functionality
drivers/pinctrl/pinctrl-rockchip.c | 87 +++++++++++++++++++++++++++++++++++++-
1 file changed, 86 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 49bf7dc..fcc89fb 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -59,6 +59,7 @@
#define GPIO_LS_SYNC 0x60
enum rockchip_pinctrl_type {
+ RK1108,
RK2928,
RK3066B,
RK3188,
@@ -624,6 +625,65 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
return ret;
}
+#define RK1108_PULL_PMU_OFFSET 0x10
+#define RK1108_PULL_OFFSET 0x110
+#define RK1108_PULL_PINS_PER_REG 8
+#define RK1108_PULL_BITS_PER_PIN 2
+#define RK1108_PULL_BANK_STRIDE 16
+
+static void rk1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
+ int pin_num, struct regmap **regmap,
+ int *reg, u8 *bit)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+
+ /* The first 24 pins of the first bank are located in PMU */
+ if (bank->bank_num == 0) {
+ *regmap = info->regmap_pmu;
+ *reg = RK1108_PULL_PMU_OFFSET;
+ } else {
+ *reg = RK1108_PULL_OFFSET;
+ *regmap = info->regmap_base;
+ /* correct the offset, as we're starting with the 2nd bank */
+ *reg -= 0x10;
+ *reg += bank->bank_num * RK1108_PULL_BANK_STRIDE;
+ }
+
+ *reg += ((pin_num / RK1108_PULL_PINS_PER_REG) * 4);
+ *bit = (pin_num % RK1108_PULL_PINS_PER_REG);
+ *bit *= RK1108_PULL_BITS_PER_PIN;
+}
+
+#define RK1108_DRV_PMU_OFFSET 0x20
+#define RK1108_DRV_GRF_OFFSET 0x210
+#define RK1108_DRV_BITS_PER_PIN 2
+#define RK1108_DRV_PINS_PER_REG 8
+#define RK1108_DRV_BANK_STRIDE 16
+
+static void rk1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
+ int pin_num, struct regmap **regmap,
+ int *reg, u8 *bit)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+
+ /* The first 24 pins of the first bank are located in PMU */
+ if (bank->bank_num == 0) {
+ *regmap = info->regmap_pmu;
+ *reg = RK1108_DRV_PMU_OFFSET;
+ } else {
+ *regmap = info->regmap_base;
+ *reg = RK1108_DRV_GRF_OFFSET;
+
+ /* correct the offset, as we're starting with the 2nd bank */
+ *reg -= 0x10;
+ *reg += bank->bank_num * RK1108_DRV_BANK_STRIDE;
+ }
+
+ *reg += ((pin_num / RK1108_DRV_PINS_PER_REG) * 4);
+ *bit = pin_num % RK1108_DRV_PINS_PER_REG;
+ *bit *= RK1108_DRV_BITS_PER_PIN;
+}
+
#define RK2928_PULL_OFFSET 0x118
#define RK2928_PULL_PINS_PER_REG 16
#define RK2928_PULL_BANK_STRIDE 8
@@ -1123,6 +1183,7 @@ static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
return !(data & BIT(bit))
? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT
: PIN_CONFIG_BIAS_DISABLE;
+ case RK1108:
case RK3188:
case RK3288:
case RK3368:
@@ -1169,6 +1230,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
spin_unlock_irqrestore(&bank->slock, flags);
break;
+ case RK1108:
case RK3188:
case RK3288:
case RK3368:
@@ -1358,6 +1420,7 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
pull == PIN_CONFIG_BIAS_DISABLE);
case RK3066B:
return pull ? false : true;
+ case RK1108:
case RK3188:
case RK3288:
case RK3368:
@@ -1385,7 +1448,6 @@ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
for (i = 0; i < num_configs; i++) {
param = pinconf_to_config_param(configs[i]);
arg = pinconf_to_config_argument(configs[i]);
-
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
rc = rockchip_set_pull(bank, pin - bank->pin_base,
@@ -2455,6 +2517,27 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
return 0;
}
+static struct rockchip_pin_bank rk1108_pin_banks[] = {
+ PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
+ IOMUX_SOURCE_PMU,
+ IOMUX_SOURCE_PMU,
+ IOMUX_SOURCE_PMU),
+ PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0),
+ PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, 0),
+ PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0),
+};
+
+static struct rockchip_pin_ctrl rk1108_pin_ctrl = {
+ .pin_banks = rk1108_pin_banks,
+ .nr_banks = ARRAY_SIZE(rk1108_pin_banks),
+ .label = "RK1108-GPIO",
+ .type = RK1108,
+ .grf_mux_offset = 0x10,
+ .pmu_mux_offset = 0x0,
+ .pull_calc_reg = rk1108_calc_pull_reg_and_bit,
+ .drv_calc_reg = rk1108_calc_drv_reg_and_bit,
+};
+
static struct rockchip_pin_bank rk2928_pin_banks[] = {
PIN_BANK(0, 32, "gpio0"),
PIN_BANK(1, 32, "gpio1"),
@@ -2684,6 +2767,8 @@ static struct rockchip_pin_ctrl rk3399_pin_ctrl = {
};
static const struct of_device_id rockchip_pinctrl_dt_match[] = {
+ { .compatible = "rockchip,rk1108-pinctrl",
+ .data = (void *)&rk1108_pin_ctrl },
{ .compatible = "rockchip,rk2928-pinctrl",
.data = (void *)&rk2928_pin_ctrl },
{ .compatible = "rockchip,rk3036-pinctrl",
--
2.7.4
RK1108 UARTs are Synopsis DesignWare 8250 compatible.
Only with different register addresses.
Signed-off-by: Andy Yan <[email protected]>
Tested-by: Jacob Chen <[email protected]>
---
Changes in v2: None
arch/arm/Kconfig.debug | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index d83f7c3..408540f 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -776,6 +776,30 @@ choice
their output to the standard serial port on the RealView
PB1176 platform.
+ config DEBUG_RK1108_UART0
+ bool "Kernel low-level debugging messages via Rockchip RK1108 UART0"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip RK1108 based platforms.
+
+ config DEBUG_RK1108_UART1
+ bool "Kernel low-level debugging messages via Rockchip RK1108 UART1"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip RK1108 based platforms.
+
+ config DEBUG_RK1108_UART2
+ bool "Kernel low-level debugging messages via Rockchip RK1108 UART2"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip RK1108 based platforms.
+
config DEBUG_RK29_UART0
bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
depends on ARCH_ROCKCHIP
@@ -1465,6 +1489,9 @@ config DEBUG_UART_PHYS
default 0x10126000 if DEBUG_RK3X_UART1
default 0x101f1000 if DEBUG_VERSATILE
default 0x101fb000 if DEBUG_NOMADIK_UART
+ default 0x10210000 if DEBUG_RK1108_UART2
+ default 0x10220000 if DEBUG_RK1108_UART1
+ default 0x10230000 if DEBUG_RK1108_UART0
default 0x11002000 if DEBUG_MT8127_UART0
default 0x11006000 if DEBUG_MT6589_UART0
default 0x11009000 if DEBUG_MT8135_UART3
@@ -1563,6 +1590,9 @@ config DEBUG_UART_PHYS
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
+ default 0xc881f000 if DEBUG_RK1108_UART2
+ default 0xc8821000 if DEBUG_RK1108_UART1
+ default 0xc8912000 if DEBUG_RK1108_UART0
default 0xe0000a00 if DEBUG_NETX_UART
default 0xe0010fe0 if ARCH_RPC
default 0xf0000be0 if ARCH_EBSA110
--
2.7.4
RK1108 is embedded with an ARM Cortex-A7 single core and a DSP core.
It is designed for varies application scenario such as car DVR, sports
DV, secure camera and UAV camera.
This patch add basic support for it with DMAC / UART / CRU / pinctrl / MMC
enabled.
Signed-off-by: Andy Yan <[email protected]>
Tested-by: Jacob Chen <[email protected]>
---
Changes in v2:
- fix timer and gic dt description
- ordering devices by register address
arch/arm/boot/dts/rk1108.dtsi | 428 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 428 insertions(+)
create mode 100644 arch/arm/boot/dts/rk1108.dtsi
diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi
new file mode 100644
index 0000000..636c294
--- /dev/null
+++ b/arch/arm/boot/dts/rk1108.dtsi
@@ -0,0 +1,428 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/rk1108-cru.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "rockchip,rk1108";
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@f00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf00>;
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <24000000>;
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ bus_intmem@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x10080000 0x2000>;
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma@102a0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x102a0000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-broken-no-flushp;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ uart2: serial@10210000 {
+ compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+ reg = <0x10210000 0x100>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "disabled";
+ };
+
+ uart1: serial@10220000 {
+ compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+ reg = <0x10220000 0x100>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ status = "disabled";
+ };
+
+ uart0: serial@10230000 {
+ compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+ reg = <0x10230000 0x100>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "disabled";
+ };
+
+ grf: syscon@10300000 {
+ compatible = "rockchip,rk1108-grf", "syscon";
+ reg = <0x10300000 0x1000>;
+ };
+
+ pmugrf: syscon@20060000 {
+ compatible = "rockchip,rk1108-pmugrf", "syscon";
+ reg = <0x20060000 0x1000>;
+ };
+
+ cru: clock-controller@20200000 {
+ compatible = "rockchip,rk1108-cru";
+ reg = <0x20200000 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ emmc: dwmmc@30110000 {
+ compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x30110000 0x4000>;
+ status = "disabled";
+ };
+
+ sdio: dwmmc@30120000 {
+ compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x30120000 0x4000>;
+ status = "disabled";
+ };
+
+ sdmmc: dwmmc@30130000 {
+ compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+ clock-freq-min-max = <400000 100000000>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x30130000 0x4000>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@32010000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0x32011000 0x1000>,
+ <0x32012000 0x1000>,
+ <0x32014000 0x2000>,
+ <0x32016000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk1108-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmugrf>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0@20030000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20030000 0x100>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1@10310000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x10310000 0x100>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2@10320000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x10320000 0x100>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3@10330000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x10330000 0x100>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma {
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma {
+ bias-pull-up;
+ drive-strength = <4>;
+ };
+
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ pcfg_input_high: pcfg-input-high {
+ bias-pull-up;
+ input-enable;
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
+ <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ i2c2m1 {
+ i2c2m1_xfer: i2c2m1-xfer {
+ rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>,
+ <0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>;
+ };
+
+ i2c2m1_gpio: i2c2m1-gpio {
+ rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
+ <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ i2c2m05v {
+ i2c2m05v_xfer: i2c2m05v-xfer {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>,
+ <1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ i2c2m05v_gpio: i2c2m05v-gpio {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+ <0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>,
+ <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_rts_gpio: uart0-rts-gpio {
+ rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
+ <1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart1_cts: uart1-cts {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart1_rts: uart1-rts {
+ rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart2m0 {
+ uart2m0_xfer: uart2m0-xfer {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>,
+ <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart2m1 {
+ uart2m1_xfer: uart2m1-xfer {
+ rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>,
+ <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart2_5v {
+ uart2_5v_cts: uart2_5v-cts {
+ rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart2_5v_rts: uart2_5v-rts {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+ };
+};
--
2.7.4
Add a rockchip,rk1108 compatible.
Signed-off-by: Andy Yan <[email protected]>
---
Changes in v2: None
arch/arm/mach-rockchip/rockchip.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index a7ab9ec..e7fdf06 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -76,6 +76,7 @@ static void __init rockchip_dt_init(void)
}
static const char * const rockchip_board_dt_compat[] = {
+ "rockchip,rk1108",
"rockchip,rk2928",
"rockchip,rk3066a",
"rockchip,rk3066b",
--
2.7.4
RK1108 EVB is designed by Rockchip for CVR field.
This patch add basic support for it, which can boot with
initramfs into shell.
Signed-off-by: Andy Yan <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
Changes in v2:
- move the board in the rockchip.txt to the block of Rockchip boards
Documentation/devicetree/bindings/arm/rockchip.txt | 5 +-
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rk1108-evb.dts | 69 ++++++++++++++++++++++
3 files changed, 74 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/rk1108-evb.dts
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 10b92b5..e658b62 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -1,6 +1,5 @@
Rockchip platforms device tree bindings
---------------------------------------
-
- Kylin RK3036 board:
Required root node properties:
- compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
@@ -111,6 +110,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+- Rockchip RK1108 Evaluation board
+ Required root node properties:
+ - compatible = "rockchip,rk1108-evb", "rockchip,rk1108";
+
- Rockchip RK3368 evb:
Required root node properties:
- compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e49476a..249dca9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -635,6 +635,7 @@ dtb-$(CONFIG_ARCH_REALVIEW) += \
arm-realview-pba8.dtb \
arm-realview-pbx-a9.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+ rk1108-evb.dtb \
rk3036-evb.dtb \
rk3036-kylin.dtb \
rk3066a-bqcurie2.dtb \
diff --git a/arch/arm/boot/dts/rk1108-evb.dts b/arch/arm/boot/dts/rk1108-evb.dts
new file mode 100644
index 0000000..3956cff
--- /dev/null
+++ b/arch/arm/boot/dts/rk1108-evb.dts
@@ -0,0 +1,69 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk1108.dtsi"
+
+/ {
+ model = "Rockchip RK1108 Evaluation board";
+ compatible = "rockchip,rk1108-evb", "rockchip,rk1108";
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x08000000>;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
--
2.7.4
Am Montag, 14. November 2016, 20:01:05 CET schrieb Andy Yan:
> From: Shawn Lin <[email protected]>
>
> Add "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc" for
> dwmmc on rk1108 platform.
>
> Signed-off-by: Shawn Lin <[email protected]>
applied to my dts32 branch with Rob's Ack taken from the unchanged v1.
Heiko
Am Montag, 14. November 2016, 20:09:53 CET schrieb Andy Yan:
> This adds the dt-binding documentation for rk1108 pinctrl
>
> Signed-off-by: Andy Yan <[email protected]>
pretty straight forward
Reviewed-by: Heiko Stuebner <[email protected]>
I guess at some later point we should move the compatible list to one
compatible per line, similar to what the mshc mmc does, because as we're
seeing right now, soc numbering is not incremental :-) .
Heiko
Am Montag, 14. November 2016, 20:10:47 CET schrieb Andy Yan:
> This add pinctrl support for Rockchip RK1108 Soc.
>
> Signed-off-by: Andy Yan <[email protected]>
still looks mostly good. I think I've now compared every register offset with
the TRM - they all look good. I've noticed two styling issues below, with
those fixed:
Reviewed-by: Heiko Stuebner <[email protected]>
> ---
> Changes in v2:
> - add pull and drive-strength functionality
>
> drivers/pinctrl/pinctrl-rockchip.c | 87
> +++++++++++++++++++++++++++++++++++++- 1 file changed, 86 insertions(+), 1
> deletion(-)
>
> diff --git a/drivers/pinctrl/pinctrl-rockchip.c
> b/drivers/pinctrl/pinctrl-rockchip.c index 49bf7dc..fcc89fb 100644
> --- a/drivers/pinctrl/pinctrl-rockchip.c
> +++ b/drivers/pinctrl/pinctrl-rockchip.c
> @@ -59,6 +59,7 @@
> #define GPIO_LS_SYNC 0x60
>
> enum rockchip_pinctrl_type {
> + RK1108,
> RK2928,
> RK3066B,
> RK3188,
> @@ -624,6 +625,65 @@ static int rockchip_set_mux(struct rockchip_pin_bank
> *bank, int pin, int mux) return ret;
> }
>
> +#define RK1108_PULL_PMU_OFFSET 0x10
> +#define RK1108_PULL_OFFSET 0x110
> +#define RK1108_PULL_PINS_PER_REG 8
> +#define RK1108_PULL_BITS_PER_PIN 2
> +#define RK1108_PULL_BANK_STRIDE 16
> +
> +static void rk1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
> + int pin_num, struct regmap **regmap,
> + int *reg, u8 *bit)
> +{
> + struct rockchip_pinctrl *info = bank->drvdata;
> +
> + /* The first 24 pins of the first bank are located in PMU */
> + if (bank->bank_num == 0) {
> + *regmap = info->regmap_pmu;
> + *reg = RK1108_PULL_PMU_OFFSET;
> + } else {
> + *reg = RK1108_PULL_OFFSET;
> + *regmap = info->regmap_base;
> + /* correct the offset, as we're starting with the 2nd bank */
> + *reg -= 0x10;
> + *reg += bank->bank_num * RK1108_PULL_BANK_STRIDE;
> + }
> +
> + *reg += ((pin_num / RK1108_PULL_PINS_PER_REG) * 4);
> + *bit = (pin_num % RK1108_PULL_PINS_PER_REG);
> + *bit *= RK1108_PULL_BITS_PER_PIN;
> +}
> +
> +#define RK1108_DRV_PMU_OFFSET 0x20
> +#define RK1108_DRV_GRF_OFFSET 0x210
> +#define RK1108_DRV_BITS_PER_PIN 2
> +#define RK1108_DRV_PINS_PER_REG 8
> +#define RK1108_DRV_BANK_STRIDE 16
styling nitpick, spaces instead of tabs between name and value. The pull
constants are correct though and only the drv constants need a fixup.
> +
> +static void rk1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
> + int pin_num, struct regmap **regmap,
> + int *reg, u8 *bit)
> +{
> + struct rockchip_pinctrl *info = bank->drvdata;
> +
> + /* The first 24 pins of the first bank are located in PMU */
> + if (bank->bank_num == 0) {
> + *regmap = info->regmap_pmu;
> + *reg = RK1108_DRV_PMU_OFFSET;
> + } else {
> + *regmap = info->regmap_base;
> + *reg = RK1108_DRV_GRF_OFFSET;
> +
> + /* correct the offset, as we're starting with the 2nd bank */
> + *reg -= 0x10;
> + *reg += bank->bank_num * RK1108_DRV_BANK_STRIDE;
> + }
> +
> + *reg += ((pin_num / RK1108_DRV_PINS_PER_REG) * 4);
> + *bit = pin_num % RK1108_DRV_PINS_PER_REG;
> + *bit *= RK1108_DRV_BITS_PER_PIN;
> +}
> +
> #define RK2928_PULL_OFFSET 0x118
> #define RK2928_PULL_PINS_PER_REG 16
> #define RK2928_PULL_BANK_STRIDE 8
[...]
> @@ -1385,7 +1448,6 @@ static int rockchip_pinconf_set(struct pinctrl_dev
> *pctldev, unsigned int pin, for (i = 0; i < num_configs; i++) {
> param = pinconf_to_config_param(configs[i]);
> arg = pinconf_to_config_argument(configs[i]);
> -
unrelated change that should be removed.
> switch (param) {
> case PIN_CONFIG_BIAS_DISABLE:
> rc = rockchip_set_pull(bank, pin - bank->pin_base,
Hi Andy,
Am Montag, 14. November 2016, 20:03:01 CET schrieb Andy Yan:
> From: Shawn Lin <[email protected]>
>
> This adds the dt-binding documentation for the clock and reset unit
> found on Rockchip rk1108 SoCs.
>
> Signed-off-by: Shawn Lin <[email protected]>
> Signed-off-by: Andy Yan <[email protected]>
> ---
>
> Changes in v2: None
>
> .../bindings/clock/rockchip,rk1108-cru.txt | 60
> ++++++++++++++++++++++ 1 file changed, 60 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
> b/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt new file
> mode 100644
> index 0000000..4d2356b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
> @@ -0,0 +1,60 @@
> +* Rockchip RK1108 Clock and Reset Unit
> +
> +The RK1108 clock controller generates and supplies clock to various
> +controllers within the SoC and also implements a reset controller for SoC
> +peripherals.
> +
> +Required Properties:
> +
> +- compatible: should be "rockchip,rk1108-cru"
> +- reg: physical base address of the controller and length of memory mapped
> + region.
> +- #clock-cells: should be 1.
> +- #reset-cells: should be 1.
> +
> +Optional Properties:
> +
> +- rockchip,grf: phandle to the syscon managing the "general register files"
> + If missing pll rates are not changeable, due to the missing pll lock
> status. +
> +Each clock is assigned an identifier and client nodes can use this
> identifier +to specify the clock which they consume. All available clocks
> are defined as +preprocessor macros in the dt-bindings/clock/rk1108-cru.h
> headers and can be +used in device tree sources. Similar macros exist for
> the reset sources in +these files.
> +
> +External clocks:
> +
> +There are several clocks that are generated outside the SoC. It is expected
> +that they are defined using standard clock bindings with following
> +clock-output-names:
> + - "xin24m" - crystal input - required,
> + - "cif_clkout" - output clock for the cif - optional
> + - "mipi_csi_clkout" - output clock for the mipi csi - optional
> + - "pclkin_vip" - external VIP clock - optional
> + - "ext_i2s" - external I2S clock - optional
> + - "ext_gmac" - external GMAC clock - optional
> + - "mac_ref_clkout" - output clock of the pll in the mac phy
we really only want to list the actual input clocks here, not outputs.
Also, the list of actual input clocks seems incomplete (hdmiphy, usbphy) and
some clocks listed here do not match the clock controller 2 patches later
(pclkin_vip, ext_gmac [rk1108 only has 10/100], ext_i2s, ...)
Heiko
On Mon, Nov 14, 2016 at 1:09 PM, Andy Yan <[email protected]> wrote:
> This adds the dt-binding documentation for rk1108 pinctrl
>
> Signed-off-by: Andy Yan <[email protected]>
Patch applied with Heiko's review tag.
Yours,
Linus Walleij
On Mon, Nov 14, 2016 at 1:10 PM, Andy Yan <[email protected]> wrote:
> This add pinctrl support for Rockchip RK1108 Soc.
>
> Signed-off-by: Andy Yan <[email protected]>
Please repost with the minor fixes from Heiko and
add his reviewed-by tag and I will apply it.
Yours,
Linus Walleij
Am Montag, 14. November 2016, 20:04:52 CET schrieb Andy Yan:
> From: Shawn Lin <[email protected]>
>
> Add the dt-bindings header for the rk1108, that gets shared
> between the clock controller and the clock references in the dts.
>
> Signed-off-by: Shawn Lin <[email protected]>
> Signed-off-by: Andy Yan <[email protected]>
> ---
>
> Changes in v2:
> - split dt-binding header from clk driver
>
> include/dt-bindings/clock/rk1108-cru.h | 270
> +++++++++++++++++++++++++++++++++ 1 file changed, 270 insertions(+)
> create mode 100644 include/dt-bindings/clock/rk1108-cru.h
>
> diff --git a/include/dt-bindings/clock/rk1108-cru.h
> b/include/dt-bindings/clock/rk1108-cru.h new file mode 100644
> index 0000000..6f30008
> --- /dev/null
> +++ b/include/dt-bindings/clock/rk1108-cru.h
> @@ -0,0 +1,270 @@
> +/*
> + * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
> + * Author: Shawn Lin <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H
> +#define _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H
> +
> +/* pll id */
> +#define RK1108_APLL_ID 0
> +#define RK1108_DPLL_ID 1
> +#define RK1108_GPLL_ID 2
> +#define RK1108_ARMCLK 3
any particular reason for diverging from namings set in the other binding
headers (PLL_APLL, ARMCLK, ...)?
> +
> +/* sclk gates (special clocks) */
> +#define SCLK_SPI0 65
> +#define SCLK_NANDC 67
> +#define SCLK_SDMMC 68
> +#define SCLK_SDIO 69
> +#define SCLK_EMMC 71
> +#define SCLK_UART0 72
> +#define SCLK_UART1 73
> +#define SCLK_UART2 74
> +#define SCLK_I2S0 75
> +#define SCLK_I2S1 76
> +#define SCLK_I2S2 77
> +#define SCLK_TIMER0 78
> +#define SCLK_TIMER1 79
> +#define SCLK_SFC 80
> +#define SCLK_SDMMC_DRV 81
> +#define SCLK_SDIO_DRV 82
> +#define SCLK_EMMC_DRV 83
> +#define SCLK_SDMMC_SAMPLE 84
> +#define SCLK_SDIO_SAMPLE 85
> +#define SCLK_EMMC_SAMPLE 86
the rk1108 seems to have a pretty small clock tree, so maybe you can reduce
the gap here a bit, like starting at 128 or 192 for the ACLKs and move
everything up a bit?
That way you save a bit of space, as we're allocation CLK_NR_CLKS entries or
the lookup array when probing the clock driver.
Heiko
> +/* aclk gates */
> +#define ACLK_DMAC 251
> +#define ACLK_PRE 252
> +#define ACLK_CORE 253
> +#define ACLK_ENMCORE 254
> +
> +/* pclk gates */
> +#define PCLK_GPIO1 321
> +#define PCLK_GPIO2 322
> +#define PCLK_GPIO3 323
> +#define PCLK_GRF 329
> +#define PCLK_I2C1 333
> +#define PCLK_I2C2 334
> +#define PCLK_I2C3 335
> +#define PCLK_SPI 338
> +#define PCLK_SFC 339
> +#define PCLK_UART0 341
> +#define PCLK_UART1 342
> +#define PCLK_UART2 343
> +#define PCLK_TSADC 344
> +#define PCLK_PWM 350
> +#define PCLK_TIMER 353
> +#define PCLK_PERI 363
> +
> +/* hclk gates */
> +#define HCLK_I2S0_8CH 442
> +#define HCLK_I2S1_8CH 443
> +#define HCLK_I2S2_2CH 444
> +#define HCLK_NANDC 453
> +#define HCLK_SDMMC 456
> +#define HCLK_SDIO 457
> +#define HCLK_EMMC 459
> +#define HCLK_PERI 478
> +#define HCLK_SFC 479
> +
> +#define CLK_NR_CLKS (HCLK_SFC + 1)
> +
> +/* reset id */
> +#define SRST_CORE_PO_AD 0
> +#define SRST_CORE_AD 1
> +#define SRST_L2_AD 2
> +#define SRST_CPU_NIU_AD 3
> +#define SRST_CORE_PO 4
> +#define SRST_CORE 5
> +#define SRST_L2 6
> +#define SRST_CORE_DBG 8
> +#define PRST_DBG 9
> +#define RST_DAP 10
> +#define PRST_DBG_NIU 11
> +#define ARST_STRC_SYS_AD 15
> +
> +#define SRST_DDRPHY_CLKDIV 16
> +#define SRST_DDRPHY 17
> +#define PRST_DDRPHY 18
> +#define PRST_HDMIPHY 19
> +#define PRST_VDACPHY 20
> +#define PRST_VADCPHY 21
> +#define PRST_MIPI_CSI_PHY 22
> +#define PRST_MIPI_DSI_PHY 23
> +#define PRST_ACODEC 24
> +#define ARST_BUS_NIU 25
> +#define PRST_TOP_NIU 26
> +#define ARST_INTMEM 27
> +#define HRST_ROM 28
> +#define ARST_DMAC 29
> +#define SRST_MSCH_NIU 30
> +#define PRST_MSCH_NIU 31
> +
> +#define PRST_DDRUPCTL 32
> +#define NRST_DDRUPCTL 33
> +#define PRST_DDRMON 34
> +#define HRST_I2S0_8CH 35
> +#define MRST_I2S0_8CH 36
> +#define HRST_I2S1_2CH 37
> +#define MRST_IS21_2CH 38
> +#define HRST_I2S2_2CH 39
> +#define MRST_I2S2_2CH 40
> +#define HRST_CRYPTO 41
> +#define SRST_CRYPTO 42
> +#define PRST_SPI 43
> +#define SRST_SPI 44
> +#define PRST_UART0 45
> +#define PRST_UART1 46
> +#define PRST_UART2 47
> +
> +#define SRST_UART0 48
> +#define SRST_UART1 49
> +#define SRST_UART2 50
> +#define PRST_I2C1 51
> +#define PRST_I2C2 52
> +#define PRST_I2C3 53
> +#define SRST_I2C1 54
> +#define SRST_I2C2 55
> +#define SRST_I2C3 56
> +#define PRST_PWM1 58
> +#define SRST_PWM1 60
> +#define PRST_WDT 61
> +#define PRST_GPIO1 62
> +#define PRST_GPIO2 63
> +
> +#define PRST_GPIO3 64
> +#define PRST_GRF 65
> +#define PRST_EFUSE 66
> +#define PRST_EFUSE512 67
> +#define PRST_TIMER0 68
> +#define SRST_TIMER0 69
> +#define SRST_TIMER1 70
> +#define PRST_TSADC 71
> +#define SRST_TSADC 72
> +#define PRST_SARADC 73
> +#define SRST_SARADC 74
> +#define HRST_SYSBUS 75
> +#define PRST_USBGRF 76
> +
> +#define ARST_PERIPH_NIU 80
> +#define HRST_PERIPH_NIU 81
> +#define PRST_PERIPH_NIU 82
> +#define HRST_PERIPH 83
> +#define HRST_SDMMC 84
> +#define HRST_SDIO 85
> +#define HRST_EMMC 86
> +#define HRST_NANDC 87
> +#define NRST_NANDC 88
> +#define HRST_SFC 89
> +#define SRST_SFC 90
> +#define ARST_GMAC 91
> +#define HRST_OTG 92
> +#define SRST_OTG 93
> +#define SRST_OTG_ADP 94
> +#define HRST_HOST0 95
> +
> +#define HRST_HOST0_AUX 96
> +#define HRST_HOST0_ARB 97
> +#define SRST_HOST0_EHCIPHY 98
> +#define SRST_HOST0_UTMI 99
> +#define SRST_USBPOR 100
> +#define SRST_UTMI0 101
> +#define SRST_UTMI1 102
> +
> +#define ARST_VIO0_NIU 102
> +#define ARST_VIO1_NIU 103
> +#define HRST_VIO_NIU 104
> +#define PRST_VIO_NIU 105
> +#define ARST_VOP 106
> +#define HRST_VOP 107
> +#define DRST_VOP 108
> +#define ARST_IEP 109
> +#define HRST_IEP 110
> +#define ARST_RGA 111
> +#define HRST_RGA 112
> +#define SRST_RGA 113
> +#define PRST_CVBS 114
> +#define PRST_HDMI 115
> +#define SRST_HDMI 116
> +#define PRST_MIPI_DSI 117
> +
> +#define ARST_ISP_NIU 118
> +#define HRST_ISP_NIU 119
> +#define HRST_ISP 120
> +#define SRST_ISP 121
> +#define ARST_VIP0 122
> +#define HRST_VIP0 123
> +#define PRST_VIP0 124
> +#define ARST_VIP1 125
> +#define HRST_VIP1 126
> +#define PRST_VIP1 127
> +#define ARST_VIP2 128
> +#define HRST_VIP2 129
> +#define PRST_VIP2 120
> +#define ARST_VIP3 121
> +#define HRST_VIP3 122
> +#define PRST_VIP4 123
> +
> +#define PRST_CIF1TO4 124
> +#define SRST_CVBS_CLK 125
> +#define HRST_CVBS 126
> +
> +#define ARST_VPU_NIU 140
> +#define HRST_VPU_NIU 141
> +#define ARST_VPU 142
> +#define HRST_VPU 143
> +#define ARST_RKVDEC_NIU 144
> +#define HRST_RKVDEC_NIU 145
> +#define ARST_RKVDEC 146
> +#define HRST_RKVDEC 147
> +#define SRST_RKVDEC_CABAC 148
> +#define SRST_RKVDEC_CORE 149
> +#define ARST_RKVENC_NIU 150
> +#define HRST_RKVENC_NIU 151
> +#define ARST_RKVENC 152
> +#define HRST_RKVENC 153
> +#define SRST_RKVENC_CORE 154
> +
> +#define SRST_DSP_CORE 156
> +#define SRST_DSP_SYS 157
> +#define SRST_DSP_GLOBAL 158
> +#define SRST_DSP_OECM 159
> +#define PRST_DSP_IOP_NIU 160
> +#define ARST_DSP_EPP_NIU 161
> +#define ARST_DSP_EDP_NIU 162
> +#define PRST_DSP_DBG_NIU 163
> +#define PRST_DSP_CFG_NIU 164
> +#define PRST_DSP_GRF 165
> +#define PRST_DSP_MAILBOX 166
> +#define PRST_DSP_INTC 167
> +#define PRST_DSP_PFM_MON 169
> +#define SRST_DSP_PFM_MON 170
> +#define ARST_DSP_EDAP_NIU 171
> +
> +#define SRST_PMU 172
> +#define SRST_PMU_I2C0 173
> +#define PRST_PMU_I2C0 174
> +#define PRST_PMU_GPIO0 175
> +#define PRST_PMU_INTMEM 176
> +#define PRST_PMU_PWM0 177
> +#define SRST_PMU_PWM0 178
> +#define PRST_PMU_GRF 179
> +#define SRST_PMU_NIU 180
> +#define SRST_PMU_PVTM 181
> +#define ARST_DSP_EDP_PERF 184
> +#define ARST_DSP_EPP_PERF 185
> +
> +#endif /* _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H */
> +
Am Montag, 14. November 2016, 20:07:42 CET schrieb Andy Yan:
> From: Shawn Lin <[email protected]>
>
> Add the clock tree definition and driver for rk1108 SoC.
>
> Signed-off-by: Shawn Lin <[email protected]>
> Tested-by: Jacob Chen <[email protected]>
> Signed-off-by: Andy Yan <[email protected]>
> ---
>
> Changes in v2:
> - fix some CodingStyle issues
>
> drivers/clk/rockchip/Makefile | 1 +
> drivers/clk/rockchip/clk-rk1108.c | 451
> ++++++++++++++++++++++++++++++++++++++ drivers/clk/rockchip/clk.h |
> 14 ++
> 3 files changed, 466 insertions(+)
> create mode 100644 drivers/clk/rockchip/clk-rk1108.c
>
> diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
> index b5f2c8e..16e098c 100644
> --- a/drivers/clk/rockchip/Makefile
> +++ b/drivers/clk/rockchip/Makefile
> @@ -11,6 +11,7 @@ obj-y += clk-mmc-phase.o
> obj-y += clk-ddr.o
> obj-$(CONFIG_RESET_CONTROLLER) += softrst.o
>
> +obj-y += clk-rk1108.o
> obj-y += clk-rk3036.o
> obj-y += clk-rk3188.o
> obj-y += clk-rk3228.o
> diff --git a/drivers/clk/rockchip/clk-rk1108.c
> b/drivers/clk/rockchip/clk-rk1108.c new file mode 100644
> index 0000000..e3a4f74
> --- /dev/null
> +++ b/drivers/clk/rockchip/clk-rk1108.c
> @@ -0,0 +1,451 @@
> +/*
> + * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
> + * Author: Shawn Lin <[email protected]>
> + * Andy Yan <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/syscore_ops.h>
> +#include <dt-bindings/clock/rk1108-cru.h>
> +#include "clk.h"
> +
> +#define RK1108_GRF_SOC_STATUS0 0x480
> +
> +enum rk1108_plls {
> + apll, dpll, gpll,
> +};
> +
> +static struct rockchip_pll_rate_table rk1108_pll_rates[] = {
> + /* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
> + RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
> + RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
> + RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 912000000, 1, 76, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 900000000, 4, 300, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 888000000, 1, 74, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 600000000, 1, 75, 3, 1, 1, 0),
> + RK3036_PLL_RATE( 594000000, 2, 99, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 504000000, 1, 63, 3, 1, 1, 0),
> + RK3036_PLL_RATE( 500000000, 6, 250, 2, 1, 1, 0),
> + RK3036_PLL_RATE( 408000000, 1, 68, 2, 2, 1, 0),
> + RK3036_PLL_RATE( 312000000, 1, 52, 2, 2, 1, 0),
> + RK3036_PLL_RATE( 216000000, 1, 72, 4, 2, 1, 0),
> + RK3036_PLL_RATE( 96000000, 1, 64, 4, 4, 1, 0),
> + { /* sentinel */ },
> +};
> +
> +#define RK1108_DIV_CORE_MASK 0xf
> +#define RK1108_DIV_CORE_SHIFT 4
> +
> +#define RK1108_CLKSEL0(_core_peri_div) \
> + { \
> + .reg = RK1108_CLKSEL_CON(1), \
> + .val = HIWORD_UPDATE(_core_peri_div, RK1108_DIV_CORE_MASK, \
> + RK1108_DIV_CORE_SHIFT) \
> + }
> +
> +#define RK1108_CPUCLK_RATE(_prate, _core_peri_div) \
> + { \
> + .prate = _prate, \
> + .divs = { \
> + RK1108_CLKSEL0(_core_peri_div), \
> + }, \
> + }
> +
> +static struct rockchip_cpuclk_rate_table rk1108_cpuclk_rates[] __initdata =
> { + RK1108_CPUCLK_RATE(816000000, 4),
> + RK1108_CPUCLK_RATE(600000000, 4),
> + RK1108_CPUCLK_RATE(312000000, 4),
> +};
> +
> +static const struct rockchip_cpuclk_reg_data rk1108_cpuclk_data = {
> + .core_reg = RK1108_CLKSEL_CON(0),
> + .div_core_shift = 0,
> + .div_core_mask = 0x1f,
> + .mux_core_alt = 1,
> + .mux_core_main = 0,
> + .mux_core_shift = 8,
> + .mux_core_mask = 0x1,
> +};
> +
> +PNAME(mux_pll_p) = { "xin24m", "xin24m"};
> +PNAME(mux_ddrphy_p) = { "dpll_ddr", "gpll_ddr", "apll_ddr" };
> +PNAME(mux_armclk_p) = { "apll_core", "gpll_core", "dpll_core" };
> +PNAME(mux_pmu_1f) = { "xin24m", "pmu_24m"};
> +PNAME(mux_usb480m_phy_p) = { "usb480m_phy0", "usb480m_phy1" };
> +PNAME(mux_usb480m_p) = { "usb480m_phy", "xin24m" };
> +PNAME(mux_hdmiphy_p) = { "hdmiphy_phy", "pclk_top_pre", "xin24m" };
pmu_1f, usbphy and hdmiphy do not seem to be used in this driver, while they
are specified in the clock documentation.
Also there is a discrepancy between your pmu_24m and pmu_24m_ena below I
think.
The rest looks sane but I didn't check every register offset :-) .
Heiko
Am Montag, 14. November 2016, 20:12:35 CET schrieb Andy Yan:
> RK1108 UARTs are Synopsis DesignWare 8250 compatible.
> Only with different register addresses.
>
> Signed-off-by: Andy Yan <[email protected]>
> Tested-by: Jacob Chen <[email protected]>
applied to my soc branch
Thanks
Heiko
Am Montag, 14. November 2016, 20:15:47 CET schrieb Andy Yan:
> Add a rockchip,rk1108 compatible.
>
> Signed-off-by: Andy Yan <[email protected]>
applied to my soc32 branch
Thanks
Heiko
Am Montag, 14. November 2016, 20:14:48 CET schrieb Andy Yan:
> RK1108 is embedded with an ARM Cortex-A7 single core and a DSP core.
> It is designed for varies application scenario such as car DVR, sports
> DV, secure camera and UAV camera.
>
> This patch add basic support for it with DMAC / UART / CRU / pinctrl / MMC
> enabled.
>
> Signed-off-by: Andy Yan <[email protected]>
> Tested-by: Jacob Chen <[email protected]>
>
> ---
>
> Changes in v2:
> - fix timer and gic dt description
> - ordering devices by register address
>
> arch/arm/boot/dts/rk1108.dtsi | 428
> ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 428
> insertions(+)
> create mode 100644 arch/arm/boot/dts/rk1108.dtsi
>
> diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi
> new file mode 100644
> index 0000000..636c294
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk1108.dtsi
> @@ -0,0 +1,428 @@
> +/*
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/rk1108-cru.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + compatible = "rockchip,rk1108";
> +
> + interrupt-parent = <&gic>;
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + serial2 = &uart2;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@f00 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0xf00>;
> + };
> + };
> +
> + arm-pmu {
> + compatible = "arm,cortex-a7-pmu";
> + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> +
unnecessary empty line (only 1 please)
otherwise looks fine now, just needs to wait for fixed clock ids now.
Heiko
On 2016/11/15 17:41, Heiko Stuebner wrote:
> Am Montag, 14. November 2016, 20:04:52 CET schrieb Andy Yan:
>> From: Shawn Lin <[email protected]>
>>
>> Add the dt-bindings header for the rk1108, that gets shared
>> between the clock controller and the clock references in the dts.
>>
>> Signed-off-by: Shawn Lin <[email protected]>
>> Signed-off-by: Andy Yan <[email protected]>
>> ---
>>
>> Changes in v2:
>> - split dt-binding header from clk driver
>>
>> include/dt-bindings/clock/rk1108-cru.h | 270
>> +++++++++++++++++++++++++++++++++ 1 file changed, 270 insertions(+)
>> create mode 100644 include/dt-bindings/clock/rk1108-cru.h
>>
>> diff --git a/include/dt-bindings/clock/rk1108-cru.h
>> b/include/dt-bindings/clock/rk1108-cru.h new file mode 100644
>> index 0000000..6f30008
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/rk1108-cru.h
>> @@ -0,0 +1,270 @@
>> +/*
>> + * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
>> + * Author: Shawn Lin <[email protected]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H
>> +#define _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H
>> +
>> +/* pll id */
>> +#define RK1108_APLL_ID 0
>> +#define RK1108_DPLL_ID 1
>> +#define RK1108_GPLL_ID 2
>> +#define RK1108_ARMCLK 3
>
> any particular reason for diverging from namings set in the other binding
> headers (PLL_APLL, ARMCLK, ...)?
>
nope, will make it consistent with others. :)
>
>> +
>> +/* sclk gates (special clocks) */
>> +#define SCLK_SPI0 65
>> +#define SCLK_NANDC 67
>> +#define SCLK_SDMMC 68
>> +#define SCLK_SDIO 69
>> +#define SCLK_EMMC 71
>> +#define SCLK_UART0 72
>> +#define SCLK_UART1 73
>> +#define SCLK_UART2 74
>> +#define SCLK_I2S0 75
>> +#define SCLK_I2S1 76
>> +#define SCLK_I2S2 77
>> +#define SCLK_TIMER0 78
>> +#define SCLK_TIMER1 79
>> +#define SCLK_SFC 80
>> +#define SCLK_SDMMC_DRV 81
>> +#define SCLK_SDIO_DRV 82
>> +#define SCLK_EMMC_DRV 83
>> +#define SCLK_SDMMC_SAMPLE 84
>> +#define SCLK_SDIO_SAMPLE 85
>> +#define SCLK_EMMC_SAMPLE 86
>
> the rk1108 seems to have a pretty small clock tree, so maybe you can reduce
> the gap here a bit, like starting at 128 or 192 for the ACLKs and move
> everything up a bit?
>
okay.
> That way you save a bit of space, as we're allocation CLK_NR_CLKS entries or
> the lookup array when probing the clock driver.
>
>
> Heiko
>
>> +/* aclk gates */
>> +#define ACLK_DMAC 251
>> +#define ACLK_PRE 252
>> +#define ACLK_CORE 253
>> +#define ACLK_ENMCORE 254
>> +
>> +/* pclk gates */
>> +#define PCLK_GPIO1 321
>> +#define PCLK_GPIO2 322
>> +#define PCLK_GPIO3 323
>> +#define PCLK_GRF 329
>> +#define PCLK_I2C1 333
>> +#define PCLK_I2C2 334
>> +#define PCLK_I2C3 335
>> +#define PCLK_SPI 338
>> +#define PCLK_SFC 339
>> +#define PCLK_UART0 341
>> +#define PCLK_UART1 342
>> +#define PCLK_UART2 343
>> +#define PCLK_TSADC 344
>> +#define PCLK_PWM 350
>> +#define PCLK_TIMER 353
>> +#define PCLK_PERI 363
>> +
>> +/* hclk gates */
>> +#define HCLK_I2S0_8CH 442
>> +#define HCLK_I2S1_8CH 443
>> +#define HCLK_I2S2_2CH 444
>> +#define HCLK_NANDC 453
>> +#define HCLK_SDMMC 456
>> +#define HCLK_SDIO 457
>> +#define HCLK_EMMC 459
>> +#define HCLK_PERI 478
>> +#define HCLK_SFC 479
>> +
>> +#define CLK_NR_CLKS (HCLK_SFC + 1)
>> +
>> +/* reset id */
>> +#define SRST_CORE_PO_AD 0
>> +#define SRST_CORE_AD 1
>> +#define SRST_L2_AD 2
>> +#define SRST_CPU_NIU_AD 3
>> +#define SRST_CORE_PO 4
>> +#define SRST_CORE 5
>> +#define SRST_L2 6
>> +#define SRST_CORE_DBG 8
>> +#define PRST_DBG 9
>> +#define RST_DAP 10
>> +#define PRST_DBG_NIU 11
>> +#define ARST_STRC_SYS_AD 15
>> +
>> +#define SRST_DDRPHY_CLKDIV 16
>> +#define SRST_DDRPHY 17
>> +#define PRST_DDRPHY 18
>> +#define PRST_HDMIPHY 19
>> +#define PRST_VDACPHY 20
>> +#define PRST_VADCPHY 21
>> +#define PRST_MIPI_CSI_PHY 22
>> +#define PRST_MIPI_DSI_PHY 23
>> +#define PRST_ACODEC 24
>> +#define ARST_BUS_NIU 25
>> +#define PRST_TOP_NIU 26
>> +#define ARST_INTMEM 27
>> +#define HRST_ROM 28
>> +#define ARST_DMAC 29
>> +#define SRST_MSCH_NIU 30
>> +#define PRST_MSCH_NIU 31
>> +
>> +#define PRST_DDRUPCTL 32
>> +#define NRST_DDRUPCTL 33
>> +#define PRST_DDRMON 34
>> +#define HRST_I2S0_8CH 35
>> +#define MRST_I2S0_8CH 36
>> +#define HRST_I2S1_2CH 37
>> +#define MRST_IS21_2CH 38
>> +#define HRST_I2S2_2CH 39
>> +#define MRST_I2S2_2CH 40
>> +#define HRST_CRYPTO 41
>> +#define SRST_CRYPTO 42
>> +#define PRST_SPI 43
>> +#define SRST_SPI 44
>> +#define PRST_UART0 45
>> +#define PRST_UART1 46
>> +#define PRST_UART2 47
>> +
>> +#define SRST_UART0 48
>> +#define SRST_UART1 49
>> +#define SRST_UART2 50
>> +#define PRST_I2C1 51
>> +#define PRST_I2C2 52
>> +#define PRST_I2C3 53
>> +#define SRST_I2C1 54
>> +#define SRST_I2C2 55
>> +#define SRST_I2C3 56
>> +#define PRST_PWM1 58
>> +#define SRST_PWM1 60
>> +#define PRST_WDT 61
>> +#define PRST_GPIO1 62
>> +#define PRST_GPIO2 63
>> +
>> +#define PRST_GPIO3 64
>> +#define PRST_GRF 65
>> +#define PRST_EFUSE 66
>> +#define PRST_EFUSE512 67
>> +#define PRST_TIMER0 68
>> +#define SRST_TIMER0 69
>> +#define SRST_TIMER1 70
>> +#define PRST_TSADC 71
>> +#define SRST_TSADC 72
>> +#define PRST_SARADC 73
>> +#define SRST_SARADC 74
>> +#define HRST_SYSBUS 75
>> +#define PRST_USBGRF 76
>> +
>> +#define ARST_PERIPH_NIU 80
>> +#define HRST_PERIPH_NIU 81
>> +#define PRST_PERIPH_NIU 82
>> +#define HRST_PERIPH 83
>> +#define HRST_SDMMC 84
>> +#define HRST_SDIO 85
>> +#define HRST_EMMC 86
>> +#define HRST_NANDC 87
>> +#define NRST_NANDC 88
>> +#define HRST_SFC 89
>> +#define SRST_SFC 90
>> +#define ARST_GMAC 91
>> +#define HRST_OTG 92
>> +#define SRST_OTG 93
>> +#define SRST_OTG_ADP 94
>> +#define HRST_HOST0 95
>> +
>> +#define HRST_HOST0_AUX 96
>> +#define HRST_HOST0_ARB 97
>> +#define SRST_HOST0_EHCIPHY 98
>> +#define SRST_HOST0_UTMI 99
>> +#define SRST_USBPOR 100
>> +#define SRST_UTMI0 101
>> +#define SRST_UTMI1 102
>> +
>> +#define ARST_VIO0_NIU 102
>> +#define ARST_VIO1_NIU 103
>> +#define HRST_VIO_NIU 104
>> +#define PRST_VIO_NIU 105
>> +#define ARST_VOP 106
>> +#define HRST_VOP 107
>> +#define DRST_VOP 108
>> +#define ARST_IEP 109
>> +#define HRST_IEP 110
>> +#define ARST_RGA 111
>> +#define HRST_RGA 112
>> +#define SRST_RGA 113
>> +#define PRST_CVBS 114
>> +#define PRST_HDMI 115
>> +#define SRST_HDMI 116
>> +#define PRST_MIPI_DSI 117
>> +
>> +#define ARST_ISP_NIU 118
>> +#define HRST_ISP_NIU 119
>> +#define HRST_ISP 120
>> +#define SRST_ISP 121
>> +#define ARST_VIP0 122
>> +#define HRST_VIP0 123
>> +#define PRST_VIP0 124
>> +#define ARST_VIP1 125
>> +#define HRST_VIP1 126
>> +#define PRST_VIP1 127
>> +#define ARST_VIP2 128
>> +#define HRST_VIP2 129
>> +#define PRST_VIP2 120
>> +#define ARST_VIP3 121
>> +#define HRST_VIP3 122
>> +#define PRST_VIP4 123
>> +
>> +#define PRST_CIF1TO4 124
>> +#define SRST_CVBS_CLK 125
>> +#define HRST_CVBS 126
>> +
>> +#define ARST_VPU_NIU 140
>> +#define HRST_VPU_NIU 141
>> +#define ARST_VPU 142
>> +#define HRST_VPU 143
>> +#define ARST_RKVDEC_NIU 144
>> +#define HRST_RKVDEC_NIU 145
>> +#define ARST_RKVDEC 146
>> +#define HRST_RKVDEC 147
>> +#define SRST_RKVDEC_CABAC 148
>> +#define SRST_RKVDEC_CORE 149
>> +#define ARST_RKVENC_NIU 150
>> +#define HRST_RKVENC_NIU 151
>> +#define ARST_RKVENC 152
>> +#define HRST_RKVENC 153
>> +#define SRST_RKVENC_CORE 154
>> +
>> +#define SRST_DSP_CORE 156
>> +#define SRST_DSP_SYS 157
>> +#define SRST_DSP_GLOBAL 158
>> +#define SRST_DSP_OECM 159
>> +#define PRST_DSP_IOP_NIU 160
>> +#define ARST_DSP_EPP_NIU 161
>> +#define ARST_DSP_EDP_NIU 162
>> +#define PRST_DSP_DBG_NIU 163
>> +#define PRST_DSP_CFG_NIU 164
>> +#define PRST_DSP_GRF 165
>> +#define PRST_DSP_MAILBOX 166
>> +#define PRST_DSP_INTC 167
>> +#define PRST_DSP_PFM_MON 169
>> +#define SRST_DSP_PFM_MON 170
>> +#define ARST_DSP_EDAP_NIU 171
>> +
>> +#define SRST_PMU 172
>> +#define SRST_PMU_I2C0 173
>> +#define PRST_PMU_I2C0 174
>> +#define PRST_PMU_GPIO0 175
>> +#define PRST_PMU_INTMEM 176
>> +#define PRST_PMU_PWM0 177
>> +#define SRST_PMU_PWM0 178
>> +#define PRST_PMU_GRF 179
>> +#define SRST_PMU_NIU 180
>> +#define SRST_PMU_PVTM 181
>> +#define ARST_DSP_EDP_PERF 184
>> +#define ARST_DSP_EPP_PERF 185
>> +
>> +#endif /* _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H */
>> +
>
>
>
> _______________________________________________
> Linux-rockchip mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
--
Best Regards
Shawn Lin
On 2016/11/15 17:35, Heiko Stuebner wrote:
> Hi Andy,
>
> Am Montag, 14. November 2016, 20:03:01 CET schrieb Andy Yan:
>> From: Shawn Lin <[email protected]>
>>
>> This adds the dt-binding documentation for the clock and reset unit
>> found on Rockchip rk1108 SoCs.
>>
>> Signed-off-by: Shawn Lin <[email protected]>
>> Signed-off-by: Andy Yan <[email protected]>
>> ---
>>
>> Changes in v2: None
>>
>> .../bindings/clock/rockchip,rk1108-cru.txt | 60
>> ++++++++++++++++++++++ 1 file changed, 60 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
>>
>> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
>> b/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt new file
>> mode 100644
>> index 0000000..4d2356b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
>> @@ -0,0 +1,60 @@
>> +* Rockchip RK1108 Clock and Reset Unit
>> +
>> +The RK1108 clock controller generates and supplies clock to various
>> +controllers within the SoC and also implements a reset controller for SoC
>> +peripherals.
>> +
>> +Required Properties:
>> +
>> +- compatible: should be "rockchip,rk1108-cru"
>> +- reg: physical base address of the controller and length of memory mapped
>> + region.
>> +- #clock-cells: should be 1.
>> +- #reset-cells: should be 1.
>> +
>> +Optional Properties:
>> +
>> +- rockchip,grf: phandle to the syscon managing the "general register files"
>> + If missing pll rates are not changeable, due to the missing pll lock
>> status. +
>> +Each clock is assigned an identifier and client nodes can use this
>> identifier +to specify the clock which they consume. All available clocks
>> are defined as +preprocessor macros in the dt-bindings/clock/rk1108-cru.h
>> headers and can be +used in device tree sources. Similar macros exist for
>> the reset sources in +these files.
>> +
>> +External clocks:
>> +
>> +There are several clocks that are generated outside the SoC. It is expected
>> +that they are defined using standard clock bindings with following
>> +clock-output-names:
>> + - "xin24m" - crystal input - required,
>> + - "cif_clkout" - output clock for the cif - optional
>> + - "mipi_csi_clkout" - output clock for the mipi csi - optional
>> + - "pclkin_vip" - external VIP clock - optional
>> + - "ext_i2s" - external I2S clock - optional
>> + - "ext_gmac" - external GMAC clock - optional
>> + - "mac_ref_clkout" - output clock of the pll in the mac phy
>
> we really only want to list the actual input clocks here, not outputs.
>
> Also, the list of actual input clocks seems incomplete (hdmiphy, usbphy) and
> some clocks listed here do not match the clock controller 2 patches later
> (pclkin_vip, ext_gmac [rk1108 only has 10/100], ext_i2s, ...)
>
yup, I was just listing the basic clock for Andy to bring up rk1108
board, so some of them was missing here. I will fix them here as well
as adding all of the input clocks in the clock driver. :)
>
> Heiko
>
> _______________________________________________
> Linux-rockchip mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
--
Best Regards
Shawn Lin
Am Dienstag, 15. November 2016, 12:45:16 CET schrieb Heiko Stuebner:
> Am Montag, 14. November 2016, 20:14:48 CET schrieb Andy Yan:
> > RK1108 is embedded with an ARM Cortex-A7 single core and a DSP core.
> > It is designed for varies application scenario such as car DVR, sports
> > DV, secure camera and UAV camera.
> >
> > This patch add basic support for it with DMAC / UART / CRU / pinctrl / MMC
> > enabled.
> >
> > Signed-off-by: Andy Yan <[email protected]>
> > Tested-by: Jacob Chen <[email protected]>
> >
> > ---
> >
> > Changes in v2:
> > - fix timer and gic dt description
> > - ordering devices by register address
> >
> > arch/arm/boot/dts/rk1108.dtsi | 428
> >
> > ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 428
> > insertions(+)
> >
> > create mode 100644 arch/arm/boot/dts/rk1108.dtsi
> >
> > diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi
> > new file mode 100644
> > index 0000000..636c294
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/rk1108.dtsi
> > @@ -0,0 +1,428 @@
> > +/*
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + * a) This file is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of the
> > + * License, or (at your option) any later version.
> > + *
> > + * This file is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + * b) Permission is hereby granted, free of charge, to any person
> > + * obtaining a copy of this software and associated documentation
> > + * files (the "Software"), to deal in the Software without
> > + * restriction, including without limitation the rights to use,
> > + * copy, modify, merge, publish, distribute, sublicense, and/or
> > + * sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following
> > + * conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be
> > + * included in all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + * OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/clock/rk1108-cru.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > +/ {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > +
> > + compatible = "rockchip,rk1108";
> > +
> > + interrupt-parent = <&gic>;
> > +
> > + aliases {
> > + serial0 = &uart0;
> > + serial1 = &uart1;
> > + serial2 = &uart2;
> > + };
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + cpu0: cpu@f00 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a7";
> > + reg = <0xf00>;
> > + };
> > + };
> > +
> > + arm-pmu {
> > + compatible = "arm,cortex-a7-pmu";
> > + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> > + };
> > +
> > +
>
> unnecessary empty line (only 1 please)
>
> otherwise looks fine now, just needs to wait for fixed clock ids now.
after Shawn fixed the clocks, applied now to my dts32 branch with that line
removed.
Thanks
Heiko
Am Montag, 14. November 2016, 20:17:43 CET schrieb Andy Yan:
> RK1108 EVB is designed by Rockchip for CVR field.
> This patch add basic support for it, which can boot with
> initramfs into shell.
>
> Signed-off-by: Andy Yan <[email protected]>
> Acked-by: Rob Herring <[email protected]>
>
> ---
>
> Changes in v2:
> - move the board in the rockchip.txt to the block of Rockchip boards
>
> Documentation/devicetree/bindings/arm/rockchip.txt | 5 +-
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/rk1108-evb.dts | 69
> ++++++++++++++++++++++ 3 files changed, 74 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/rk1108-evb.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
> b/Documentation/devicetree/bindings/arm/rockchip.txt index 10b92b5..e658b62
> 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -1,6 +1,5 @@
> Rockchip platforms device tree bindings
> ---------------------------------------
> -
> - Kylin RK3036 board:
> Required root node properties:
> - compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
dropped this unrelated change
> @@ -111,6 +110,10 @@ Rockchip platforms device tree bindings
> Required root node properties:
> - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
>
> +- Rockchip RK1108 Evaluation board
> + Required root node properties:
> + - compatible = "rockchip,rk1108-evb", "rockchip,rk1108";
> +
> - Rockchip RK3368 evb:
> Required root node properties:
> - compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";
binding moved to a separate patch and applied to my dts64 to prevent conflicts
with px5 addition.
And the actual board dts of course applied to my dts32 branch.
Thanks
Heiko